TV Splitters

Bring HDMI content to a distant display up to 394 ft (120 m) away over Cat6 with SIIG’s HDBitT® receiver. It delivers crisp Full HD 1080p at 60 Hz and supports both direct 1‑to‑1 links and, when paired with the matching transmitter (CE‑H26T11‑S1), 1‑to‑many distribution via unmanaged Gigabit switches-enabling up to 30 receivers per transmitter to mirror the same source. IR remote pass‑through lets users operate the source from the viewing area, simplifying control in signage and presentation environments. A robust, ventilated metal housing promotes effective heat dissipation for stable, continuous operation. (Note: 1‑to‑many mode requires the CE‑H26T11‑S1 transmitter, sold separately.).Delivers Full HD video content up to 1080p@60Hz resolution.Features direct 1-to-1 connection or 1-to-multiple connection through unmanaged Gigabit network routers or switches, With HDBitT® transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays. Note: 1-to-multiple connection requires HDMI Extender over CAT6 with IR - 120m, part # CE-H26T11-S1, sold separately.IR remote control allows to remotely control the HDMI source device from the remote display side.High quality durable metal housing with ventilation panels provides excellent heat dissipation to ensure reliable performance and system stability during long hours of operation

The Antennas Direct® ClearStream® JUICE8 Amplifier boosts the TV signal from your indoor or outdoor TV antenna or CATV system and distributes that signal to as many as 8 TVs. Distributing signal to multiple TVs and using 50 ft. or more of coaxial cable can result in some signal loss. The JUICE8 helps overcome these signal challenges by strengthening the signal coming in from the TV antenna’s coaxial cable for consistent reception and picture quality. This 8-output distribution amplifier is designed to be used in homes and professional settings in urban, suburban, and rural areas. Operating frequency extends to 1.2 GHz to accommodate CATV and cable broadband applications. Precision, machine-sealed, zinc die-cast housing protects against dust and water droplets and provides shielding from electrostatic discharge, with excellent surge protection on all ports. Can be used outdoors with 75-ohm F-termination caps, coaxial cables that have watertight F-connectors, and a power inserter (not included) to allow the power adapter to share the coaxial cable connected to the designated output shown on this device..8-output distribution amplifier boosts signal to be split for reception of free broadcast TV on up to 8 TVs or digital converter boxes without impacting quality; supports ATSC 3.0 NEXTGEN TV, and 4K/8K UHD.Compact size for indoor use, can be used outdoors with termination caps, watertight F-connectors, and weather boots; compatible with HDTV, analog, digital TV antenna applications, legacy CATV.Operating frequency extends to 1.2 GHz to accommodate CATV and cable broadband applications; frequency range: 54 to 1,220 MHz.Each market has TV towers located in different areas; distance to the towers and obstructions like trees and your home's building materials will affect reception; an antenna cannot provide cable TV channels.Precision, machine-sealed, zinc die-cast housing protects against dust and water droplets and provides shielding from electrostatic discharge; excellent surge protection on all ports.Low noise figure: less than 3 dB; gain: 6.5 dB per port: 54 to 1,000 MHz, 5.5 dB per port: 1,001 to 1,220 MHz.Measures 4.25 in. H x 4.5 in. W x 1 in. D.90-day manufacturer warranty.Includes 40 in. coaxial cable, power adapter for indoor use, 2 wall screws, 2 grounding screws, and instructions.WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

The VS194 4-Port 4K DisplayPort Splitter is the perfect solution for anyone who needs to send one source of DisplayPort high definition video to two or four DisplayPort displays. The VS194 can not only split but also expand DisplayPort audio/video signal on two or four DisplayPort monitors which is ideal for any multi-display application. The VS194 is compatible with DisplayPort 1.2a and can support up to 4K resolution at 60 Hz, making it effective and ideal for use with all DisplayPort displays in home theater applications, as well as in corporate, educational and commercial settings. More from the Manufacturer.SST/ Split Mode: Duplicate a single video source to 4 displays with a maximum resolution of 4K on each monitor.MST/ Extend Mode: Extend a video source across 4 displays with a maximum resolution of 4K..Supports MST/ Extend Mode and SST/ Split Mode*.Supports resolutions up to 4096 x 2160 / 3840 x 2160 @ 60 Hz

Extend HDMI audio/video signals up to 394 ft (120 m) using a single Cat6 cable for cost‑effective connectivity. This transmitter supports resolutions up to 4K @30 Hz and 1080p, HDCP 1.4 compliance, and 2‑channel stereo audio. Flexible architecture enables direct 1‑to‑1, 1‑to‑many via unmanaged Gigabit switches, or many‑to‑many through VLAN on smart switches-up to 255 receivers per transmitter using HDBitT® protocol. One‑way IR pass‑through lets you control the source device remotely, while the durable, surface‑mountable metal housing ensures efficient heat dissipation and reliable long‑hour operation. (Additional receivers, CE‑H25E11‑S2, sold separately.).Supports up to 4K @30Hz and 1080p. HDCP 1.4 compliant. Supports 2-channel Stereo Audio. Auto adjustment for different cable lengths to produce the best video/audio experience. We recommend using high performance pure copper Cat6 cables to ensure reliable performance.Direct 1-to-1 connection, 1-to-many through unmanaged Gigabit network switches, or many-to-many via VLAN through a Smart Ethernet Switch. With HDBitT transport protocol, you can connect up to 255 Receivers* per Transmitter to not only extend but split HDMI signals to multiple displays. *Additional Receivers (CE-H25E11-S2) are sold separately.One-directional IR control from RX side to TX side. Allows the source device to recognize remote commands from afar. You can control the HDMI source device at a remote location with the included IR cables that forward commands over a Cat6 cable.High quality surface mountable metal housing efficiently dissipates heat build-up, to ensure system stability and trouble-free operation

The 4-Port HDMI Distribution Amplifier Splitter is a 1-Input 4-Output splitter supporting up to 4K video. This splitter utilizes the HDMI 2.0 standard and is a perfect solution for connecting a computer, Blu-ray™ player, gaming console, media server, or V receiver to four HDMI displays. The HDMI distribution amplifier splitter is HDCP 2.2 compliant and supports exceptional 4K Ultra HD resolutions up to 4096 x 2160 at 60hz, handling total HDMI data rates up to 18Gbps..4096 x 2160 resolution for high-quality video delivery.Features HDMI input to get connected with the top of the line HDMI supported devices.HDMI (High Definition Multimedia Interface) offers fantastic sound/video quality and single-cable comfort

The 4K 1 x 4 HDMI Splitter enables HDMI video and audio distribution from one source to four displays. Advanced EDID functionality enables the switch to read and copy EDID automatically from the screens, or a user can manually copy the EDID audio/video information to the switch..Supports HDCP and 3D..EDID copy function for high-definition display..Lossless and reliable reproduction of high-resolution video signals..Supports 4K (UHD) resolutions up to 3840 x 2160.

The Antennas Direct® ClearStream® JUICE4 Amplifier boosts the TV signal from your indoor or outdoor TV antenna or CATV system and distributes that signal to as many as 4 TVs. Distributing signal to multiple TVs and using 50 ft. or more of coaxial cable can result in some signal loss. The JUICE4 helps overcome these signal challenges by strengthening the signal coming in from the TV antenna’s coaxial cable for consistent reception and picture quality. This 4-output distribution amplifier is designed to be used in homes and professional settings in urban, suburban, and rural areas. Operating frequency extends to 1.2 GHz to accommodate CATV and cable broadband applications. Precision, machine-sealed, zinc die-cast housing protects against dust and water droplets and provides shielding from electrostatic discharge, with excellent surge protection on all ports. It can be used outdoors with 75-ohm F-termination caps, coaxial cables that have watertight F-connectors, and a power inserter (not included) to allow the power adapter to share the coaxial cable connected to the designated output shown on this device..4-output distribution amplifier boosts signal to be split for reception of free broadcast TV on up to 4 TVs or digital converter boxes without impacting quality; supports ATSC 3.0 NEXTGEN TV, and 4K/8K UHD.Compatible with HDTV, analog, digital TV antenna applications, and legacy CATV.Operating frequency extends to 1.2 GHz to accommodate CATV and cable broadband applications; frequency range: forward path 54 to 1,220 MHz, return path 5 to 42 MHz.Each market has TV towers located in different areas; distance to the towers and obstructions like trees and your home's building materials will affect reception; an antenna cannot provide cable TV channels.Precision, machine-sealed, zinc die-cast housing protects against dust and water droplets and provides shielding from electrostatic discharge; excellent surge protection on all ports.Low noise figure: less than 3 dB; gain: 8.5 dB per port: 54 to 750 MHz, 7.5 dB per port: 751 to 1,000 MHz, 7 dB per port: 1,001 to 1,220 MHz.90-day manufacturer warranty.Measures 3.5 in. H x 3.8 in. W x 1 in. D; compact size for indoor use, can be used outdoors with termination caps, watertight F-connectors, and weather boots.Includes 40-in. coaxial cable, power adapter for indoor use, 2 wall screws, grounding screw, and instructions.WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov