Welded Frame Tables
109 results
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Waterproof plastic resin tops resist damage from: food stains, gasoline, lacquer thinner, paint remover, battery acid, drain cleaner, permanent marker and paint..Size: 48"D x 72"W Kidney Shaped.Fast easy height adjustments from 21" to 30" in 1" increments with included Speed-Wrench.Green color goes all the through, wont scratch or wear off and resists stains and damage.Light weight water-proof blow molded plastic designed to virtually eliminate top deflection.Strong welded steel frame and 3 bolt leg construction provides the maximum in strength and durability.Heavy Duty construction Ideal in public and commercial spaces including preschools, schools and places of worship.Stays open securely with automatic lock open legs.Mar-Proof Plastic foot caps protect carpets and floors.Free SpeedWrench offers fast height adjustments and commercial duty construction.⚠ WARNING: This product can expose you to chemicals, such as Formaldehyde and / or Lead, which are known to the State of California to cause cancer and / or birth defects, and / or other reproductive hard. For more information go to: www.P65Warnings.ca.gov/furniture. Note: This product complies with CPSIA Sec. 101 California 93120 (CARB Phase II) and TSCA Title VI for Formaldehyde, & EPA Standards for Lead..Green 72" x 48" kidney shape blow-molded plastic top adjustable height activity table has commercial duty construction, with black full steel frame.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing : Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Collaborative, inviting, comfortable, durable, trendy and safe. This is the bucket list of what furniture needs to be in today's trendy cafeteria environments. Introducing the Collaborator from National Public Seating. A choice of 1 ¼"HPL, 1 ¾" Butcherblock or Whiteboard Industrial Grade tops helps maximize your room's functionality. Tabletops mount onto 5-gauge support plates that are welded onto an 8-gauge X base frame. Available in dining height (30") as well as bar height (42"). Bar Height tables include crossbeam for extra stability. Turn your Cafeteria into a Café dining experience with the trendy new Collaborator from NPS..5 gauge support plates.Solid 8 gauge Industrial grade frame.2 leveling glides on each base.1.25-in Whiteboard Top.Particleboard Core with Edge Banding.Powder-Coated Black Santex Frame.500 lb Weight Capacity.10 Year Warranty.Collaborative, inviting, and built to impress—The Collaborator by National Public Seating elevates cafeterias with café-style dining and unmatched durability