Yellow Patch Cables

CAT6 PATCH CABLE 3FT YELLOW.Snagless patch cable is perfect for VoIP, video and file transfers.Cable length: 3'.Connections: One RJ-45 male connector on both the ends.Connectivity: Wired.Bare stranded copper conductor for better conductivity and PVC jacket for added durability.Meets ISO/IEC 11801 and TIA/EIA-568-B.2-1 certifications or standards.Cable type: Cat6.Connector plating: 50 micron gold-plated Connector plating.Comes in yellow color.Impedance: 100 +/- 15 ohm at 1 - 550 MHz, Resistance: 93.8 ohm/km at 20 deg C max, Capacitance: 56 pF/m max.Dielectric strength: AC 1.5 kV, Spark test: 2.5 kV, Structural return loss: 8.6 dB min at 550 MHz, Propagation delay: 536 nS/100 m max at 550 MHz.Data transfer rate: 100 Mbps.Increases your network speed with higher bandwidth.Protects your network for future expansion.2-row staggered pin configuration controls cross-talk at hyper-frequency.Comes with lifetime warranty

Staples Brand.25 ft.Yellow.Patch Cable

Staples Brand.10 ft.Yellow.Patch Cable

With a polyvinyl chloride jacket, the StarTech C6PATCH5YL 5' yellow molded Cat6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity..Category 6 patch cable connects workstation to wall outlet.Convenient length of 5'.Has 50-micron, male RJ-45 gold-plated connectors to offer optimum conductivity while eliminating signal loss due to oxidation or corrosion.Suitable for use with Gigabit networks.Has copper conductors with a PVC jacket that enables you to color code your network cable runs as needed.Meets CSA TIA/EIA-568B standards and RoHS Green compliant.Comes in yellow color.Cable rating: 500 MHz.Features four pair UTP conductors for efficient conductivity.Constructed with 24 gauge copper wire to ensure high-performance capability for your demanding Ethernet applications, such as Power over Ethernet.Manufactured using high-quality copper conductors to provide highest value for your cable investment.Patches from hub to distribution panel.Constructed and tested to keep near end crosstalk well within acceptable limits.Has colored hoods for departmental color coding.Constructed with top quality components.Comes with lifetime warranty

The C2G ® 3' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.3ft.Yellow.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

CAT-6 for seamless connection over a network.Designed to transmit data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.7' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.Integrated cable management.Answer/end calls, adjust volume and mute the microphone on the device.For use with Microsoft OC and LYNC Enterprise class software

The C2G® 7' male to male category 6 yellow snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 7'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in yellow color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.22 lbs..Comes with lifetime warranty

StarTech 45PATCH15YL Cat5e Patch Cable with Snagless RJ45 Connectors, 15ft, Yellow.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat5e cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty

Make Power-over-Ethernet-capable Gigabit network connections - 50ft Cat6 Cable / 50' Ethernet Patch Cable / 50 ft Gigabit Cat6 Cable - Yellow Gigabit Snagless Cat6 Patch Cable / ETL Verified / UTP Cat 6 Cable - 50 ft RJ45 Male to Male Patch Cord - 24 AWG / 100% Copper / 50-micron Gold Connectors - Designed for use with Gigabit networks - Patches from hub to distribution panel - Connects workstation to wall outlet - Guaranteed reliability with a lifetime warranty.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty

The C2G ® 5' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty

The C2G ® 10' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.RJ-45 Male.10ft.Yellow

CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.10' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

Tripp Lite 6' yellow fiber optic patch cable.Patch cable is perfect for fibre channel (SAN) applications.Length: 6'.Has two LC male connectors on both ends.PVC plenum jacket offers protection against corrosive environment.Core/cladding diameter: 8.3/125 u

CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.10' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty

Get the Tripp Lite N201-004-YW CAT-6 Cable to ensure reliable Ethernet network connections between your system and routers, hubs or switches. Both ends of this networking cable are fitted with RJ-45 male connectors for smooth transfer of signals. Its PVC jacket properly insulates the copper conductor and is flexible, reducing the possibility of cable damage. Besides protecting the connector clips, the snagless design makes the cable less prone to snapping during installation..Capable of transmitting data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.4' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty.The Tripp Lite N201-004-YW 4' CAT-6 RJ-45 Snagless Molded Patch Cable, Yellow, is apt for 10 Gigabit Ethernet networks and facilitates error-free data transfer.

Tripp Lite Cat6 Patch Cable, Yellow, 5 Ft..5 ft.1 x RJ-45 Male.1 x RJ-45 Male.Yellow

Fiber optic patch cable..Yellow.Fiber optic LC male/LC male.Duplex multimode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket, glass fiber.Applications: Networking equipment that requires single mode fiber optic patch cables

Fiber optic patch cable..Yellow.Fiber optic LC Male/SC Male.Duplex singlemode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket.Applications: Networking equipment that requires single mode fiber optic patch cabling.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SC connectors.Diameter: 9 microns core, 125 microns clad.Fiber type: Glass.Beveled edge on ends of glass makes insertion of plug a breeze.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes duplex fiber optic patch cable, 10' duplex singlemode fiber patch LC/SC cable.Compliant and standards: FDDI, OFNR.Warranty: Lifetime limited

CAT-6 to conveniently connect network devices..Capable of transmitting data at 1000 Mbps.Dual gold-plated RJ-45 male network connectors for a flawless connection.2' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

These patch cables feature molded connectors with integral strain relief..Yellow.Category 6 RJ45 Male/RJ45 male.14'.Material: Polyvinyl chloride (PVC) jacket.Conductor: Copper

Ideal solution for data applications requiring high speed data transmission and fiber connections in patch panels, hubs, switches, and routers..Yellow.Fiber optic/2 x LC male network first and second end.Use in gigabit Ethernet and fiber channel applications.3.28'.Type: Singlemode, Technology: Fiber optic.Core/cladding diameter: 9/125 micron.Jacket type: LSZH rated (low smoke zero halogen).Attenuation loss meets or exceeds industry standards.Molded connectors.Certifications and standards: RoHS.Weight: 0.7 oz..Warranty: Lifetime limited.Warranty: Lifetime limited

Patch cable..Yellow.Fiber optic LC Male/SC Male.Duplex single mode fiber is most commonly used in LAN applications.3'.Material: Polyvinyl Chloride (PVC) - jacket.Applications: Networking equipment that requires single mode fiber optic patch cables.Jacket type: Plenum.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SC connectors.Diameter: 125 micron clad, 8.3 micron core.Number of fibers: 2.color-coded shrouds identify transmit and receive.Beveled edge on ends of glass makes insertion of plug a breeze.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes 1M duplex single mode fiber patch cable, LC/SC, duplex fiber optic patch cable.Compliant and standards: FDDI, OFNR.Warranty: Lifetime limited

The Tripp Lite yellow 26.25' patch cable quickly transmits clear data signals through LAN with a higher operating bandwidth. This single-mode fiber optic patch cable has two LC male on first end and two LC male on second end for connectivity. It has core/cladding diameter of 8.3/125 um and features durable PVC jacket for added protection. It supports network device, patch panel and switch. It delivers twice the bandwidth throughput of multimode cable. It has beveled edge on glass ends for easy plug insertion into patch panel or switch..Single-mode fiber optic patch cable transmits fast, clear data signals through LAN with a higher bandwidth.Cable length: 26.25'.Connections: Two LC male on both ends.Connectivity: Wired.PVC jacket for added safety.Meets RoHS, OFNR certifications and standards.Comes in yellow color.Core/cladding diameter: 8.3/125 um.Supports network device, patch panel and switch.Beveled edges on glass ends offer easy insertion into a patch panel or switch.Zip cord for easy plug insertion.Comes with lifetime limited warranty

Patch cable..Yellow.Fiber optic LC Male/SC Male.Duplex single mode fiber is most commonly used in LAN applications.16'.Material: Polyvinyl Chloride (PVC) - jacket.Applications: Networking equipment that requires single mode fiber optic patch cables.Jacket type: Plenum.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SC connectors.Diameter: 125 micron clad, 8.3 micron core.Number of fibers: 2.color-coded shrouds identify transmit and receive.Beveled edge on ends of glass makes insertion of plug a breeze.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes 5M duplex single mode fiber patch cable, LC/SC, duplex fiber optic patch cable.Compliant and standards: FDDI, OFNR.Warranty: Lifetime limited

Comprehensive CAT6 550 Mhz Snagless Patch Cables have a molded low profile, snagless boot that makes installing these cables quick and easy every time while providing superior strain relief. Comprehensive Patch Cables are available in a variety of colors. RoHS Compliant. Lifetime Warranty. When it has to work, it has to be Comprehensive!.Connecting devices to a local area network (LAN) for wired internet and data transfer. Ensuring stable and high-speed internet connectivity..This cable is 3 feet long..Cable uses RJ45 connectors on both ends. RJ45 connectors are standard for Ethernet cables and have the following features: RJ45 Connector Details: Connector Type: RJ45 (8P8C) Pin Count: 8 pins.It is constructed with a 24 AWG (American Wire Gauge) stranded copper conductor, ensuring flexibility and durability. It is encased in a CM Grade PVC (Polyvinyl Chloride) jacket, providing reliable insulation and protection. The cable is colored yellow, offering clear identification.primarily focuses on providing high-speed data transfer and reliable network connections with Data Transfer Rate: Up to 10 Gbps (10,000 Mbps)..Compatible with a variety of devices. Here are some common examples: Computers: Desktops, laptops, and servers. Network Switches: Managed and unmanaged switches. Routers: Home and office routers..Comes with a Life time warranty.

AddOn 6.5' Optic patch cable comes with low smoke zero halogen jacket and supports network devices. Cable with 2 x LC male connectors on both sides provides higher speeds with increased bandwidth and is ideal for LAN or SAN connectivity..2 x LC male/2 x LC male.Molded.Cable Length: 6.5'.Jacket material: Low smoke zero halogen.Cable type: Fiber optic.Yellow.Device supported: Network device.Core/Cladding diameter: 9/125 micrometer.Fiber optic mode: Single-mode.Fiber Qty: 2.Specifically designed for ethernet, multimedia, or communication applications is intended for use with 10Gb applications.Suited for LAN's or SAN's is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Low-smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.Provides the fire protection needed to run within walls and air plenums eliminating the need for conduit.Injection molding process provides each connection greater durability in resisting pulls, strains, and impacts from cabling installs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.100% optically tested for insertion loss.Warranty: 3 years limited.AddOn 6.5' Optic patch cable in yellow color adds perfect choice for ethernet, multimedia or communication and 10GB applications and offers fire protection.