1000BASE-T Cables

The Tripp Lite N222-01K-BL 1000' Cat6 Gigabit solid network cable in blue color, features four pairs of 23 AWG solid conductors inside a high-quality CMR PVC jacket for long distance signal integrity. The cable provides you a stable performance up to 550 MHz frequency. It drastically reduces impedance and structural return loss compared to standard 100 MHz wire..Cat6 solid network cable.Cable length: 1000'.Compatible with network device.Blue PVC jacket.Connectors: Bare wire on first end, bare wire on second end.23 AWG, 4-pair conductor.Designed for premise (in-wall) cabling applications.Premium cabling for category 6, category 5e and category 5 applications.Drastically reduce impedance and structural return loss compared to standard 100 MHz wire.Deliver stable performance up to 550 MHz/1 Gbps communication

Electronic Master CAT6211000B 1000-feet UTP CAT6 Network Cable is professional-quality cable with 24 gauge copper clad aluminum conductor, polyolefin insulation and 4 unshield-twisted-pairs(UTP). This can maxima the cable length you can run and guaranteed better signal quality with low impedance cable..Professional quality cable with 24 AWG copper clad aluminum conductor.Maxima the cable length you can run and guaranteed better signal quality.Polyolefin insulation and 4 unshielded twisted pairs.Delivers reliable performance.Manages to take minimal wall space with its soft and flexible external jacket.Deliver optimum conductivity while eliminating signal loss due to oxidation.High speed transfer rate.Support power over Ethernet.RoHS Compliant

White.Category 5e bare wire/bare wire.High-density polyethylene insulation.1000'.Material: Polyvinyl chloride (PVC) jacket, high-density polyethylene (HDPE) - insulation, Gauge: 24 AWG.Conductor: Bare copper.Device supported: Network device.Technology: Unshielded twisted pair (UTP), Jacket type: CM, CMR, plenum, MPR.Outer diameter: 5.3 mm.Pairs per cable: 4 pairs.Conductor DC resistance: 89 Ohm/km, Insulation resistance: 100 Ohm/km.Foot-marked cable.Ideal for 10Base-T(IEEE 802.3), 100BASE-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN(IEEE 802.12), token ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155, voice and multimedia.CM/CMR rated for use in walls and conduit in ceiling.Bandwidth: Supports voice/data/video distribution applications up to 350 MHz.Compliant and standards: EIA/TIA 568B.2, UL, CSA, ETL, RoHS.Weight: 27 lbs..Warranty: Lifetime limited

Avoid having excess Ethernet cable lying around by building your own cables to the exact length needed using this Bulk Ethernet Copper Cable from Monoprice! Features: Unshielded Twisted Pair (UTP) Category 6 Ethernet cable 23AWG solid, pure bare copper conductors CMP (Plenum) fire safety rating 550MHz bandwidth 1000 foot roll Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

The Comprehensive® CAT6ASHB-1000 1000' bare wire Cat6a shielded solid bulk cable in blue, supports voice/data/video distribution applications up to 650 MHz. Featuring PVC jacket, this 4-shielded twisted pairs 23 AWG bare copper solid cable has a maximum conductor DC resistance of 9.8 Ohms/100 m..Cat6a shielded solid bulk cable for Ethernet and Gigabit networks.Cable length: 1000'.Color: Blue, Material: PVC jacket.Connectors: Bare wire on both the ends.Conductor DC resistance: 9.8 Ohms/100 m max.Conductor: 4 shielded twisted pairs 23 AWG bare copper solid cable.Supports voice/data/video distribution applications: Up to 650 MHz.Meets RoHS, UL Rated, meets all Cat6a TIA/EIA standards certifications and standards.Weight: 40.5 lbs..Comes with lifetime warranty

Bulk cable..Black.Category 6 bare wire/bare wire.Durable, high-density polyethylene insulation, PVC jacket.1000'.Material: Polyvinyl chloride (PVC) jacket, high-density polyethylene (HDPE) - insulation, polyethylene, Gauge: 24 AWG.Conductor: Bare copper.Device supported: Network device.Technology: Unshielded twisted pair (UTP), Jacket type: CM, CMR, CMG, MPR.Outer diameter: 6.2 mm.Pairs per cable: 4 pairs.Conductor DC resistance: 9.8 Ohm at 100 m.Polyethylene separator for enhanced NEXT, ELFEXT and RL bandwidth.Ideal for 10Base-T, 100BASE-TX, 1000Base-TX, 100 Vg-AnyLAN, token ring, TP-PMD, 350 Mbps CDDI, ATM 155, and all proposed Category 6 requirements for high-speed, full duplex, parallel transmission protocols.CM/CMG rated for single floor, general purpose use in walls and ceilings.Bandwidth: Supports voice/data/video distribution applications up to 550 MHz.Compliant and standards: EIA/TIA 568B.2, UL, CSA, ETL, RoHS.Weight: 27 lbs..Warranty: Lifetime limited

The 4XEM 1000 ft Cat6A Network Cable delivers exceptional performance for professional network installations requiring long‑distance reliability, high‑speed data transfer, and fire‑safe riser‑rated construction. Built with 23 AWG solid bare copper conductors, this premium cable ensures outstanding signal integrity, low attenuation, and superior conductivity compared to CCA alternatives. Its CMR riser‑rated jacket makes it ideal for vertical in‑wall runs between floors and throughout structured cabling systems. Designed for enterprise‑grade performance, this Cat6A cable supports 10 Gbps data transmission and strong bandwidth capabilities across long distances. With bare‑wire ends for custom termination, it is perfect for installers building tailored network drops and patch runs. Fully compliant with ANSI/TIA‑568.2‑E and constructed from high‑quality copper, this 1000 ft spool ensures dependable, future‑ready connectivity. Backed by a lifetime warranty, it provides long‑term value in any professional environment..Ideal for riser‑rated networking in commercial buildings..Provides a full 1000 ft for custom long‑run installs..Built with 23 AWG solid pure copper conductors..Wrapped in a white CMR riser‑rated jacket..Supports strong signal flow with Cat6A performance..Uses bare‑wire ends for flexible termination..Delivers reliable 10 Gbps transmission capability..Compatible with patch panels, jacks, and LAN systems..Meets ANSI/TIA and CMR compliance standards..Lifetime warranty for lasting durability.

Avoid having excess Ethernet cable lying around by building your own cables to the exact length needed using this Bulk Ethernet Copper Cable from Monoprice! Features: Unshielded Twisted Pair (UTP) Category 5e Ethernet cable 24AWG solid, pure bare copper conductors CMP (Plenum) fire safety rating 350MHz bandwidth 1000 foot roll Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

Efficient and reliable, the Comprehensive CAT6SHBLK-1000 CAT-6 Cable is a great option for Ethernet network connections between a computer system and a router, switch or hub. This networking cable comes with bare ends and can be attached to modular connectors to link devices of your choice. It has a durable and good-quality PVC jacket that preserves the integrity of the high-quality copper conductor..CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.bare wire connectors on both sides for dependable network connectivity.1000' CAT-6 that can be used as per your needs.Comes with a lifetime limited warranty.The Comprehensive CAT-6SHBLK-1000 1000' CAT-6 Shielded Twisted Pair Network Cable, Black, supports 10 Gigabit Ethernet networks to facilitate optimum data transfer.

Orange.Category 5e bare wire/bare wire.High-density polyethylene insulation.1000'.Material: Polyvinyl chloride (PVC) jacket, high-density polyethylene (HDPE) - insulation, Gauge: 24 AWG.Conductor: Bare copper.Device supported: Network device.Technology: Unshielded twisted pair (UTP), Jacket type: CM, CMR, plenum, MPR.Outer diameter: 5.3 mm.Pairs per cable: 4 pairs.Conductor DC resistance: 89 Ohm/km, Insulation resistance: 100 Ohm/km.Foot-marked cable.Ideal for 10Base-T(IEEE 802.3), 100BASE-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN(IEEE 802.12), token ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155, voice and multimedia.CM/CMR rated for use in walls and conduit in ceiling.Bandwidth: Supports voice/data/video distribution applications up to 350 MHz.Compliant and standards: EIA/TIA 568B.2, UL, CSA, ETL, RoHS.Weight: 27 lbs..Warranty: Lifetime limited

The Comprehensive® 1000' shielded Cat6 network cable in blue color, has bare wire connector on both the ends. The 24 AWG solid bare copper conductor ensures optimal signal conductivity. With its polyvinyl chloride jacket, this network cable ensures long lasting durability. It has excellent attenuation and crosstalk characteristics. This high-performance data communications cable is suitable for noisy environments..Shielded network cable for high bandwidth applications such as 622 ATM, Wideband, Ethernet 1000BASE-T and emerging applications.Cable length: 1000'.Bare wire connector on both the ends.Connectivity: Wired.Conductor size: 24 AWG.Conductor: Solid bare copper, Jacket: Polyvinyl chloride (PVC).Meets RoHS, UL/cUL or ETL, EIA/TIA 568 B.2-1, UL, CSA and ISO/IEC 11801 certifications and standards.Color: Blue.Cable rating: Cat6 - 550 MHz, Fire rating: CMR rated, Outer diameter: 6.6 mm.Conductor DC resistance: 9.8 ohm at 100 m max, Data transfer rate: 3.2 Gb/s.High-performance data communications cable for noisy environments.Excellent attenuation and crosstalk characteristics.Weight: 27 lbs..Comes with lifetime warranty

Avoid having excess Ethernet cable lying around by building your own cables to the exact length needed using this Bulk Ethernet Copper Cable from Monoprice! Features: Unshielded Twisted Pair (UTP) Category 5e Ethernet cable 24AWG solid, pure bare copper conductors CMR (Riser) fire safety rating 350MHz bandwidth 1000 foot roll Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

The StarTech WIRC6PATBLRL stranded Cat 6 patch cable in blue, is 1000' long and has PVC jacket for insulation. The cable provides optimal network performance and is perfect solution for emerging gigabit network. This cable is perfect to use in any 10Base-T, 100Base-TX or 1000Base-TX network and in home or office environments..Patch cable is perfect for use in any 10Base-T, 100Base-TX or 1000Base-TX (Gigabit Ethernet) network and in home, office and other environments.Dimensions: 1000'L.Comes in blue color and features polyvinyl chloride jacket with 24 AWG copper conductor for optimum insulation.Bare wire connectors at both the ends for efficient connectivity.Cable rating: Cat 6 - 500 MHz.Stranded cable provides excellent protection.Number of conductors: 4 pair UTP.Fire rating: CMG rated (general purpose).Cat 6 cable is the great way to connect emerging gigabit network.Expertly constructed to offer durability.Cat 6 wire provides the ultimate in network performance.Cat 6 cable improves upon the Cat 5e specification by providing twice the available bandwidth (up to 500 MHz).Contains patch cable.Meets RoHS, EIA/TIA-568 Cat 6 - up to 500 MHz certifications and standards.Comes with lifetime limited warranty

The Tripp Lite N222-01K-BK 1000' bulk solid-core PVC cable in black, has less impedance and structural return loss than 100 MHz wire. It transfers data at a rate of 128 Mbps..Bulk cable is Ideal for 10/100/1000 Base-T Ethernet, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, EIA/TIA and Token Ring type 3 applications.Dimensions: 1000' cable length.Black CMR-rated PVC jacket.Conductor: 23 AWG 4 twisted pairs solid bare copper.Connections: 1 x bare wire on both ends.Data transfer rate: 1 Gbps.Designed for distributing data, voice and digital video across Gigabit Ethernet networks.Minimum near-end crosstalk.Bandwidth: 550 MHz.RoHS compliant.Comes with lifetime limited warranty

The Comprehensive® CAT6B-1000 bare wire Cat6 solid bulk cable in blue, has a PVC jacket and for added protection. This cable measuring 1000' has 4 twisted pairs solid bare copper conductors that assures high conductivity. The cable is suitable for 10Base-T(IEEE 802.3), 100Base-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN(IEEE 802.12), Token Ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155 and all proposed Category 6 requirements for high-speed, full duplex and parallel transmission protocols..Bulk cable is perfect for 10Base-T(IEEE 802.3), 100Base-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN, Token Ring(IEEE 802.5), TP-PMD(ANSI X3T9.5).Cable length: 1000'.Connections: Bare wire to bare wire.Wired connectivity.Gauge: 24 AWG.Material: PVC jacket, conductor: 4 twisted pairs solid bare copper.Meets Cat6 TIA/EIA, EIA/TIA 568B.2, RoHS standards.Bandwidth: 550 MHz.Conductor resistance: 9.8 Ohm at 100 m.Outer diameter: 6.2 mm.Polyethylene separator for enhanced NEXT, ELFEXT and RL bandwidth.CM/CMG rated for single floor, general purpose use in walls and ceilings.Durable, high-density polyethylene insulation, PVC jacket.Weight: 27 lbs..Comes with lifetime warranty.Blue 1000' bulk cable features durable, high-density polyethylene insulation, PVC jacket.

Avoid having excess Ethernet cable lying around by building your own cables to the exact length needed using this Bulk Ethernet Copper Cable from Monoprice! Features: Unshielded Twisted Pair (UTP) Category 5e Ethernet cable 24AWG solid, pure bare copper conductors CMR (Riser) fire safety rating 350MHz bandwidth 1000 foot roll Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

CAT-5e to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.100' CAT-5e for easy tethering.Comes with a lifetime limited warranty

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

CAT-5e for seamless connection over a network.Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male network connectors for a flawless connection.100' CAT-5e for easy tethering.Comes with a lifetime limited warranty

CAT-6 for efficient data transfer across a network..Seamless transmission of data at the rate of 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.100' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

Make Fast Ethernet network connections using this high quality Cat5e Cable with Power-over-Ethernet capability / 1000ft Cat5e Ethernet Bulk Cable / 1000 ft Roll Blue Cat5e Stranded UTP Patch Cable / 1000' Blue Cat5e Wiring - Blue Cat 5e Cable - High quality 24 AWG copper wire - Convenient measurement of network runs with our foot-marked cable - Packaged in a Reelex box for easy pulling and fewer kinks - Designed for use with Fast Ethernet networks - Lifetime Warranty.Colored cables allow for easy identification and troubleshooting.Easy to use and install.Backed by StarTech.com's lifetime warranty

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Digiwave CAT621100G CAT6 500Mhz Network Cable is uses for connecting a PC, Mac or network device to 10/100/1000 Ethernet networks. Gold-plated copper contacts on the RJ45 male to male connectors provide excellent conductivity for accurate high-speed transmissions. Constructed with high quality material to protect the RJ45 plug of the cable from damage during installation..Patch Network Cable is uses for connecting a PC, Mac or network device.Provide excellent conductivity for accurate high speed transmissions.Constructed with durable material to protect the RJ45 plug of the cable from damage.Delivers reliable performance.Manages to take minimal wall space with its soft and flexible external jacket.Deliver optimum conductivity while eliminating signal loss due to oxidation.High speed transfer rate.Support power over Ethernet.Patch Network Cable for 10/100/1000 Ethernet networks.Cable is ready for use with RJ45 connector installed

10ft Cat6 Snagless Unshielded Network Patch Cable - Gray.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Gray.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in gray color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.29 lbs..Comes with lifetime warranty

Industrial-grade Ubiquiti UniFi Ethernet cable protects your network from elemental and electrostatic damage..Industrial-grade CAT-5e Ethernet cable that protects your network from elemental and electrostatic damage.Cable length is 1000'.Conductor is made of solid bare copper and provides 24 AWG; jacket is made of polyethylene in black.Internal anti-crosstalk divider to preserve signal integrity in high-traffic areas.Meets or exceeds the ANSI/TIA and ISO/IEC standards.Features internal braid, foil shielding and drain wire for increased ESD damage protection

Connect high-speed network devices - like modems, PCs, laptops, smart TVs, gaming consoles and more - with this Staples TECH Ethernet cable. The 50-foot cable provides extra length to connect from across the room, while the CAT 6 configuration offers data transfer speeds up to 1 Gbps for fast performance. This Staples TECH CAT 6 Ethernet cable has snag-free RJ45 connectors for an efficient and stable signal between compatible devices. Backed by Staples Brands 100% satisfaction guarantee, or your money back..Cat-6 Ethernet cable delivers consistent internet connection at speeds up to 1 Gbps between your computer and networking devices.100' cable length.Features RJ45 plugs on both ends.Comes in blue.Backed by Staples Brands 100% Satisfaction Money Back Guarantee.Enable fast and reliable internet connection with the Staples TECH CAT 6 Ethernet cable.

The Belkin® RJ45 Performance Category 6 UTP patch cable is the perfect performance upgrade. Used to replace any Cat 5 cable that fails to support 100 Base-T or Gigabit Ethernet. Includes RJ45 male-to-male connectors and a snagless molded strain relief. Sn agless molds protect the RJ45 tap from being damaged during installation. Internal load bar assures accurate positioning of pairs and consistent high performance. 2-row staggered pin configuration to control cross-talk at hyper-frequency. Capable of impro ving the return loss in your current network by 40%!.Perfect in conjunction with 100 Base-T and Gigabit Ethernet networks.50 micron gold plated connectors to ensure a clean and clear transmission.Exceeds the performance requirement of Category 6; PowerSum tested.Black color; 100' length.Manufacturer's lifetime warranty.Belkin™ 100' CAT6 Snagless patch cable in black color in gray color is capable of improving the return loss in current network by 40 percent and is compatible with 100 Base-T.

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

The 4XEM 100 ft Cat6A Snagless RJ45 Ethernet Patch Cable delivers reliable and ultra‑fast 10 Gigabit connectivity for enterprise, business, and educational networks. Built with 25 AWG pure copper stranded conductors, this cable ensures superior signal integrity and performance compared to CCA alternatives. The snagless overmold strain‑relief boot prevents latch damage during installation, while the FT1 UL‑rated PVC jacket delivers long‑lasting durability and flexibility. Supporting 500 MHz bandwidth, this UTP cable enables smooth data transmission, stable VoIP communication, video streaming, and high‑speed file transfers. With a generous 100 ft length, it is ideal for routing connections across server rooms, offices, and structured wiring spaces. Fully compliant with TIA/EIA‑568B.2 and RoHS, this Cat6A cable is engineered for professional‑grade performance and backed by a lifetime warranty for long‑term reliability..Designed for networking across long device connections..Extends reach with a 100 ft cable length..Equipped with RJ45 male connectors using 568B wiring..Built with 25 AWG pure copper and a blue PVC jacket..Delivers 500 MHz bandwidth for strong signal flow..Uses RJ45 terminals for dependable Ethernet links..Enables 10 Gbps speeds for heavy network use..Works with routers, switches, and patch panels..Complies with RoHS and TIA/EIA‑568B.2 standards..Lifetime warranty for lasting value.

Designed for horizontal cable runs in air ducts / conduits / drop ceilings / walls etc.-Plenum fire rating-Supports reliable 550MHz/1 Gbps Ethernet network connections-Compatible w/ Category 5e & Category 6 applications-ETL Verified / 23 AWG / 100% Copper / Lifetime Warranty-Cat6 Ethernet Cable / Bulk Cat6 Cable / Box of Cat6 Cable / Cat6 Plenum Cable / Cat 6 Wire Network Cable / WIRC6CMP / WIRC6-1000 ft / 1000ft / 1000 foot / 1000foot / 1000 feet / 1000feet / 1000' / 1000 ' / 305 m.UL Listed CMP/FT6 Plenum Fire Rating.Supports reliable 550MHz/1Gbps Ethernet network connections.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.ETL verified.High quality 23 AWG copper wire.This bulk Cat6 cable delivers reliable Gigabit network connections, which ensures high-performance capability for your demanding Ethernet applications. The Cat6 cable is plenum rated for in-wall horizontal installations..This plenum-rated Category 6 cable has been tested for CMP (FT6), and is ideal for installation in air plenums, ducts, walls, conduit, drop ceilings, or anywhere CMP fire rating is required. It's perfect for delivering data, voice and video over Gigabit Ethernet networks..Make Gigabit network connections using this high-quality, plenum-rated Cat6 Cable

The N222-01K-WH Cat6 Gigabit Bulk Solid-Core PVC Cable is premium high-speed cabling designed for Cat6 premise applications, such as the distribution of data, voice and digital video across Gigabit Ethernet networks. Designed for fast transmission and excellent signal quality, this white cable ensures peak performance through your LAN (local area network).Manufactured from 23 AWG copper wire, the four-pair solid UTP N222-01K-WH delivers speeds up to 550 MHz/1 Gbps. Protected by a CMR-rated PVC jacket, this cable drastically reduces impedance and structural return loss as compared to standard 100 MHz wire. Near-end crosstalk levels are kept to a minimum, making the N222-01K-WH ideal for 10/100/1000 Base-T Ethernet, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, EIA/TIA and Token Ring Type 3 applications.The N222-01K-WH meets most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6, draft 11)..CMR-rated PVC jacket.High-quality 23 AWG 4-pair solid copper wire.Less impedance and structural return loss than 100 MHz wire.Meets IEEE 802.3ab and ANSI/EIA/TIA 568 standards.Rated for 550 MHz/1 Gbps communications

The 4XEM 10 ft Cat6A Snagless RJ45 Ethernet Patch Cable provides reliable 10 Gigabit connectivity for professional, commercial, and educational environments. Built with 25 AWG pure copper stranded conductors, this cable delivers excellent electrical performance and lower signal loss than CCA-based alternatives. The snagless overmold strain‑relief boot protects the RJ45 latch during installation, while the FT1 UL‑rated PVC jacket offers long‑lasting durability and flexibility. Supporting 500 MHz bandwidth, this UTP cable ensures smooth data transmission, stable VoIP communication, and efficient high-speed networking. With a convenient 10 ft length, it is ideal for desktops, server racks, patch panels, and everyday equipment connections. Fully compliant with TIA/EIA‑568B.2 and RoHS, this Cat6A cable offers dependable performance and is backed by a lifetime warranty for lasting value..Ideal for networking in offices, labs, and business setups..Provides a 10 ft cable length for everyday device links..Uses RJ45 male connectors wired to the 568B standard..Built with 25 AWG pure copper and a blue PVC jacket..Delivers 500 MHz bandwidth for stable data flow..Features RJ45 terminals for reliable Ethernet access..Supports 10 Gbps speeds for high‑performance networks..Works with switches, routers, and patch panel systems..Complies with RoHS and TIA/EIA‑568B.2 standards..Lifetime warranty for lasting dependability.

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Tripp Lite N201-100-BL CAT-6 Gigabit Snagless Molded Patch Cable (100ft).Meets Category 6 cabling standards.Premium cabling for CAT-6, CAT-5E & CAT-5 applications.Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 & ETL (Category 6, draft 11).Drastically reduces impedance & structural return loss compared to standard 100MHz wire.Snagless boots protect the locking tabs on the RJ45 male connectors from being damaged during installation.Features molded connectors with integral strain relief.Rated for 550MHz/1Gbps communication.Blue.Lifetime limited warranty.The Tripp Lite N201-100-BL 100' CAT-6 Patch Cable, Blue, is ideal for 10 Gigabit Ethernet networks and provides dependable data transfer.

With a polyvinyl chloride jacket, the StarTech C6PATCH100WH 100' white molded Cat6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity..Cable length: 100'.One RJ-45 male connector on both the ends.Connectivity: Wired.Conductor size: 24 AWG.Conductor: Copper, Jacket: Polyvinyl chloride (PVC).Meets RoHS, ETL, TIA/EIA-568-B.1-2001 T568B certifications and standards.Color: White, Connector plating: 50-micron gold plated.Cable rating: Cat6 - 500 MHz, Number of conductors: 4 pair UTP, Fire rating: CMG rated (general purpose).Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color-coding.Constructed with top quality components.Includes patch cable.Comes with lifetime warranty.Has colored hoods for departmental color coding

Achieve Unmatched Network Performance with StarTech 100ft Cat6a Ethernet Cable Elevate your network connectivity with the StarTech 100ft Cat6a Ethernet Cable. Engineered for high-performance and durability, this cable ensures fast, reliable, and secure connections for all your networking needs. Designed to support Multi-Gigabit/Multi-speed connections, this Cat6a cable offers robust protection against electromagnetic interference (EMI/RFI) and noise, ensuring minimal signal loss and consistent performance. The 27AWG pure bare copper wire construction enhances conductivity and reduces resistance, providing reliable data transmission. The snagless connectors with 50-micro gold-plated contacts ensure a precise fit, minimizing wear and maintaining signal integrity. The flexible Low Smoke Zero Halogen (LSZH) jacket is flame-retardant, emitting low smoke and toxic fumes, making it ideal for installations in poorly-ventilated areas, industrial settings, and residential environments. This versatile Cat6a patch cord is perfect for 10GBASE-T networks and supports up to 100W output for Power over Ethernet (PoE++) devices. It is backward compatible with Cat 6 and Cat 5/5e standards, ensuring seamless integration into existing network setups..This Cat6a Ethernet cable is designed for networking use, providing reliable connectivity for high-speed data transmission in both professional and home environments..The cable measures 100 feet in length, offering extensive reach for various networking setups..The cable features RJ-45 connectors on both ends, each with 8 pins, ensuring compatibility with standard Ethernet ports..Constructed with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, the cable is durable and safe for various installations. The true color of the cable is blue..Terminal type 1: RJ-45 male connector on one end. Terminal type 1: RJ-45 male connector on the other end..Supports data transfer rates up to 10Gbps, making it ideal for 10GBASE-T networks and backward compatible with Cat 6 and Cat 5/5e standards..Compatible with 10G switches, Network Attached Storage (NAS), SFP modules, and PoE++ devices. For a full list of compatible devices, refer to the extended description..The cable is Fluke Tested and ETL Verified for guaranteed Cat6a performance. It complies with RoHS, REACH, and CE standards for safety and environmental protection..The cable comes with a lifetime warranty, ensuring long-term reliability and performance.

Get the Monoprice 109550 CAT-5e Cable to ensure reliable Ethernet network connections between your system and routers, hubs or switches. Both ends of this networking cable play host to RJ-45 male network connectors for seamless connection between devices. It has a durable and good-quality jacket that preserves the integrity of the high-quality copper conductor..CAT-5e to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male network connectors on both sides for easy connectivity.10' CAT-5e to ensure convenient tethering.Comes with a lifetime limited warranty.The Monoprice 109550 10' 30-AWG CAT-5e UTP Flat Ethernet Network Cable, Black, is ideal for 1000 Mbps networks and provides dependable data transfer.

Achieve Unmatched Network Performance with StarTech 100ft Cat6a Ethernet Cable Elevate your network connectivity with the StarTech 100ft Cat6a Ethernet Cable. Engineered for high-performance and durability, this cable ensures fast, reliable, and secure connections for all your networking needs. Designed to support Multi-Gigabit/Multi-speed connections, this Cat6a cable offers robust protection against electromagnetic interference (EMI/RFI) and noise, ensuring minimal signal loss and consistent performance. The 27AWG pure bare copper wire construction enhances conductivity and reduces resistance, providing reliable data transmission. The snagless connectors with 50-micro gold-plated contacts ensure a precise fit, minimizing wear and maintaining signal integrity. The flexible Low Smoke Zero Halogen (LSZH) jacket is flame-retardant, emitting low smoke and toxic fumes, making it ideal for installations in poorly-ventilated areas, industrial settings, and residential environments. This versatile Cat6a patch cord is perfect for 10GBASE-T networks and supports up to 100W output for Power over Ethernet (PoE++) devices. It is backward compatible with Cat 6 and Cat 5/5e standards, ensuring seamless integration into existing network setups..This Cat6a Ethernet cable is designed for networking use, providing reliable connectivity for high-speed data transmission in both professional and home environments..The cable measures 100 feet in length, offering extensive reach for various networking setups..The cable features RJ-45 connectors on both ends, each with 8 pins, ensuring compatibility with standard Ethernet ports..Constructed with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, the cable is durable and safe for various installations. The true color of the cable is black..Terminal type 1: RJ-45 male connector on one end. Terminal type 1: RJ-45 male connector on the other end..Supports data transfer rates up to 10Gbps, making it ideal for 10GBASE-T networks and backward compatible with Cat 6 and Cat 5/5e standards..Compatible with 10G switches, Network Attached Storage (NAS), SFP modules, and PoE++ devices. For a full list of compatible devices, refer to the extended description..The cable is Fluke Tested and ETL Verified for guaranteed Cat6a performance. It complies with RoHS, REACH, and CE standards for safety and environmental protection..The cable comes with a lifetime warranty, ensuring long-term reliability and performance.

The 4XEM 100 ft Cat6A Snagless RJ‑45 Ethernet Patch Cable delivers high‑performance connectivity for demanding professional environments. Rated Cat6A at 500 MHz and supporting 10 Gbps, it uses 25 AWG pure copper, stranded conductors for superior signal integrity and reliability. The cable features RJ‑45 male connectors with TIA/EIA‑568B pinout and 30 µin gold‑plated contacts, ensuring clean, stable transmission. Its gray overmold snagless strain‑relief boot and PVC jacket (FT1, UL) enhance durability for long‑term use. The 100 ft length is ideal for extended patching between switches, routers, patch panels, and workstation endpoints. Fully compliant with RoHS and TIA/EIA‑568B.2, this UTP 4‑pair cable has passed PoE support testing, making it suitable for VoIP and powered network devices. Backed by a lifetime warranty, it provides dependable performance for enterprise‑grade networking..Supports networking tasks for structured LAN setups..Extends 100 feet for long‑distance patch routing..Connects using RJ‑45 male to RJ‑45 male, 568B pinout..Utilizes 25 AWG pure copper and gray PVC FT1 jacket..End 1 features RJ‑45 male for Ethernet termination..Enables 10 Gbps Cat6A throughput at 500 MHz..Works with switches, routers, and patch panels..Meets TIA/EIA‑568B.2 and RoHS compliance..Lifetime warranty for dependable use.

The Tripp Lite N224-01K-GN 1000' bulk solid-core plenum-rated CMP cable in blue, made of high-quality 24 AWG 4-pair solid copper wire comes with a 350 MHz/1 Gbps rate. It is suitable for all horizontal wiring applications..Bulk cable is ideal for horizontal wiring applications, including 10/100/1000 Base-T Ethernet, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice applications.Dimensions: 1000' cable length.Blue CMP-rated PVC jacket.Conductor: 23 AWG 4 twisted pairs solid bare copper.Connections: 1 x bare wire on both ends.Data transfer rate: 1 Gbps.Designed for distributing data, voice and digital video across Gigabit Ethernet networks.Minimum near-end crosstalk.Bandwidth: 550 MHz.RoHS compliant.Comes with lifetime limited warranty

Designed for riser installation runs such as in walls / between floors / elevator shafts where CMR fire rating is required - Supports reliable 550MHz/1Gbps Ethernet network connections - Compatible with Category 5e & Category 6 applications - ETL Verified / 23 AWG / 100% Copper / Lifetime Warranty - Cat6 Ethernet Cable / Bulk Cat6 Cable / Box of Cat6 Cable / Cat6 RJ45 / Cat 6 Wire Network Cable / WIR6CMR - 1000 ft / 1000ft / 1000 foot / 1000foot / 1000 feet / 1000feet / 1000' / 1000 ' / 305 m.UL Listed CMR Riser Fire Rating.Supports reliable 550MHz/1Gbps Ethernet network connections.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.ETL verified.High-quality 23 AWG copper wire.This Category 6 cable has been tested for CMR riser installations, and is ideal for in-wall, between floor and elevator shaft cable runs where CMR fire rating is required..Make Gigabit Ethernet connections with PoE support, in applications requiring CMR-rated cable

Achieve Unmatched Network Performance with StarTech 100ft Cat6a Ethernet Cable Elevate your network connectivity with the StarTech 100ft Cat6a Ethernet Cable. Engineered for high-performance and durability, this cable ensures fast, reliable, and secure connections for all your networking needs. Designed to support Multi-Gigabit/Multi-speed connections, this Cat6a cable offers robust protection against electromagnetic interference (EMI/RFI) and noise, ensuring minimal signal loss and consistent performance. The 27AWG pure bare copper wire construction enhances conductivity and reduces resistance, providing reliable data transmission. The snagless connectors with 50-micro gold-plated contacts ensure a precise fit, minimizing wear and maintaining signal integrity. The flexible Low Smoke Zero Halogen (LSZH) jacket is flame-retardant, emitting low smoke and toxic fumes, making it ideal for installations in poorly-ventilated areas, industrial settings, and residential environments. This versatile Cat6a patch cord is perfect for 10GBASE-T networks and supports up to 100W output for Power over Ethernet (PoE++) devices. It is backward compatible with Cat 6 and Cat 5/5e standards, ensuring seamless integration into existing network setups..This Cat6a Ethernet cable is designed for networking use, providing reliable connectivity for high-speed data transmission in both professional and home environments..The cable measures 100 feet in length, offering extensive reach for various networking setups..The cable features RJ-45 connectors on both ends, each with 8 pins, ensuring compatibility with standard Ethernet ports..Constructed with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, the cable is durable and safe for various installations. The true color of the cable is gray..Terminal type 1: RJ-45 male connector on one end. Terminal type 1: RJ-45 male connector on the other end..Supports data transfer rates up to 10Gbps, making it ideal for 10GBASE-T networks and backward compatible with Cat 6 and Cat 5/5e standards..Compatible with 10G switches, Network Attached Storage (NAS), SFP modules, and PoE++ devices. For a full list of compatible devices, refer to the extended description..The cable is Fluke Tested and ETL Verified for guaranteed Cat6a performance. It complies with RoHS, REACH, and CE standards for safety and environmental protection..The cable comes with a lifetime warranty, ensuring long-term reliability and performance.

This Cat6 UTP cable with RJ45 connectors is recommended for connecting network components like printers, computers, copiers, routers, servers, modems and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this one-foot black cable ensures peak performance throughout your local area network (LAN)..1 foot Cat6 Cable.Cat6 UTP patch cord rated for high-speed 1 Gbps communications.Over 38% slimmer than standard Cat6 cables to increase airflow in full racks.Easy to route around corners and through crowded cable management panels.Snagless RJ45 connectors prevent tabs from being damaged during installation.This product is covered by a Lifetime Limited Warranty

Belkin® 14' RJ45 Cat-5E patch cables connect all the hardware destinations in a Local Area Network (LAN). Premium snagless-type models feature moldings to protect the connection. They're ideal for 10/100/1000 BaseT networks, and exceed the performance req uirement of Category 5e..14' long.Black.1 each.Exceeds the performance requirement of Category 5e. Molded.Available in 7', 14', 25' & 50' sizes.Premium snagless-type moldings to protect the connection.Belkin lifetime warranty.50-micron gold-plated connectors insure a clean and clear transmission.PowerSum tested.Black color.Manufacturer's lifetime guarantee.Belkin™ 14' CAT5e Snagless molded patch cable in black color has RJ-45 Male terminal connector and is compatible with 10/100 Base-T network.

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Connect your computer system to a router, switch or hub with the Monoprice 100134 CAT-5e Cable that offers reliable Ethernet connectivity. This networking cable features an RJ-45 male connector at one end and an RJ-110 female connector at the other, for seamless transfer of signals between devices. Its high-quality copper conductor is sheathed in a sturdy jacket for durability and optimal insulation of the wire..CAT-5e to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male and 1x RJ-110 Female connectors for connecting networking devices.7' CAT-5e to ensure convenient tethering.Comes with a lifetime limited warranty.The Monoprice 100134 7' CAT-5e Ethernet Network Cable, Blue, supports 1000 Mbps networks to provide uninterrupted data transfer.

The 4XEM 500 ft. CAT6 Pure Copper CMR Riser Bulk Cable is engineered for high‑performance network infrastructure requiring reliability, speed, and strict safety compliance. Constructed with 23 AWG solid pure copper conductors, this premium riser‑rated cable ensures excellent signal integrity, reduced attenuation, and consistent data transmission across demanding installations. The CMR‑rated PVC jacket supports safe vertical in‑wall runs between floors, meeting fire‑safety and building code standards. Supporting frequencies up to 550 MHz, this cable maintains stable performance for 10 Gbps up to 55 m and 1 Gbps up to 100 m. Ideal for LAN deployments, VoIP systems, video applications, and professional networking builds, it comes in a 500 ft. pull‑box for smooth, tangle‑free dispensing. Compliant with ANSI/TIA‑568.2‑E, ISO/IEC 11801, and RoHS, it delivers long‑lasting performance backed by a lifetime warranty..Engineered for riser installations in commercial and residential networks..Provides 500 ft length for long structured cabling runs..Constructed with solid 23 AWG pure copper conductors..Protected by a blue PVC CMR riser‑rated jacket..Supports 550 MHz for high‑bandwidth data applications..Supplied as connector‑free bulk cable for flexible termination..Delivers 10 Gbps at short distances with strong signal stability..Compatible with keystone jacks, patch panels, and structured LANs..Meets ANSI/TIA‑568.2‑E, ISO/IEC 11801, and RoHS standards..Lifetime warranty for long‑term reliability.

The C2G® 10' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.25 lbs..Comes with lifetime warranty