1000BASE-T Cables

Electronic Master CAT6211000B 1000-feet UTP CAT6 Network Cable is professional-quality cable with 24 gauge copper clad aluminum conductor, polyolefin insulation and 4 unshield-twisted-pairs(UTP). This can maxima the cable length you can run and guaranteed better signal quality with low impedance cable..Professional quality cable with 24 AWG copper clad aluminum conductor.Maxima the cable length you can run and guaranteed better signal quality.Polyolefin insulation and 4 unshielded twisted pairs.Delivers reliable performance.Manages to take minimal wall space with its soft and flexible external jacket.Deliver optimum conductivity while eliminating signal loss due to oxidation.High speed transfer rate.Support power over Ethernet.RoHS Compliant

White.Category 5e bare wire/bare wire.High-density polyethylene insulation.1000'.Material: Polyvinyl chloride (PVC) jacket, high-density polyethylene (HDPE) - insulation, Gauge: 24 AWG.Conductor: Bare copper.Device supported: Network device.Technology: Unshielded twisted pair (UTP), Jacket type: CM, CMR, plenum, MPR.Outer diameter: 5.3 mm.Pairs per cable: 4 pairs.Conductor DC resistance: 89 Ohm/km, Insulation resistance: 100 Ohm/km.Foot-marked cable.Ideal for 10Base-T(IEEE 802.3), 100BASE-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN(IEEE 802.12), token ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155, voice and multimedia.CM/CMR rated for use in walls and conduit in ceiling.Bandwidth: Supports voice/data/video distribution applications up to 350 MHz.Compliant and standards: EIA/TIA 568B.2, UL, CSA, ETL, RoHS.Weight: 27 lbs..Warranty: Lifetime limited

Bulk cable..Black.Category 6 bare wire/bare wire.Durable, high-density polyethylene insulation, PVC jacket.1000'.Material: Polyvinyl chloride (PVC) jacket, high-density polyethylene (HDPE) - insulation, polyethylene, Gauge: 24 AWG.Conductor: Bare copper.Device supported: Network device.Technology: Unshielded twisted pair (UTP), Jacket type: CM, CMR, CMG, MPR.Outer diameter: 6.2 mm.Pairs per cable: 4 pairs.Conductor DC resistance: 9.8 Ohm at 100 m.Polyethylene separator for enhanced NEXT, ELFEXT and RL bandwidth.Ideal for 10Base-T, 100BASE-TX, 1000Base-TX, 100 Vg-AnyLAN, token ring, TP-PMD, 350 Mbps CDDI, ATM 155, and all proposed Category 6 requirements for high-speed, full duplex, parallel transmission protocols.CM/CMG rated for single floor, general purpose use in walls and ceilings.Bandwidth: Supports voice/data/video distribution applications up to 550 MHz.Compliant and standards: EIA/TIA 568B.2, UL, CSA, ETL, RoHS.Weight: 27 lbs..Warranty: Lifetime limited

Black Box CAT6A 650-MHz Solid Ethernet Bulk Shielded Cable provides transmission performance beyond 650MHz exceeding the industry standards and ETL Verified for supporting the operation of 10Gig Ethernet applications (10GBASE-T). This cabling provides support for high-bandwidth applications such as data centers and other data-intensive or backbone requirements..CAT6A Ethernet Cable, 650-MHz Solid Ethernet Bulk Cable.Cable Length (ft) 1000.Connections First End Bare Wire, Second End Bare Wire.Gauge (AWG) 23, Jacket Type CMP, LSZH, Plenum - Color Green.Data Transfer Rate 10 Gbit/s.Features Alien Cross Talk (AXT), Near End Cross Talk (NEXT), Halogen Free.Limited Lifetime Warranty.Constructed from Internal separator, FEP insulation, dielectric tape, drain wire, aluminum/Mylar tape.A center isolation member maintains pair separation for optimal NEXT performance.CAT6A UTP comes with 0.271" outside diameter.Tested up to 650 MHz.Foil shield construction virtually eliminates alien crosstalk

Efficient and reliable, the Comprehensive CAT6SHBLK-1000 CAT-6 Cable is a great option for Ethernet network connections between a computer system and a router, switch or hub. This networking cable comes with bare ends and can be attached to modular connectors to link devices of your choice. It has a durable and good-quality PVC jacket that preserves the integrity of the high-quality copper conductor..CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.bare wire connectors on both sides for dependable network connectivity.1000' CAT-6 that can be used as per your needs.Comes with a lifetime limited warranty.The Comprehensive CAT-6SHBLK-1000 1000' CAT-6 Shielded Twisted Pair Network Cable, Black, supports 10 Gigabit Ethernet networks to facilitate optimum data transfer.

Orange.Category 5e bare wire/bare wire.High-density polyethylene insulation.1000'.Material: Polyvinyl chloride (PVC) jacket, high-density polyethylene (HDPE) - insulation, Gauge: 24 AWG.Conductor: Bare copper.Device supported: Network device.Technology: Unshielded twisted pair (UTP), Jacket type: CM, CMR, plenum, MPR.Outer diameter: 5.3 mm.Pairs per cable: 4 pairs.Conductor DC resistance: 89 Ohm/km, Insulation resistance: 100 Ohm/km.Foot-marked cable.Ideal for 10Base-T(IEEE 802.3), 100BASE-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN(IEEE 802.12), token ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155, voice and multimedia.CM/CMR rated for use in walls and conduit in ceiling.Bandwidth: Supports voice/data/video distribution applications up to 350 MHz.Compliant and standards: EIA/TIA 568B.2, UL, CSA, ETL, RoHS.Weight: 27 lbs..Warranty: Lifetime limited

The Comprehensive® 1000' shielded Cat6 network cable in blue color, has bare wire connector on both the ends. The 24 AWG solid bare copper conductor ensures optimal signal conductivity. With its polyvinyl chloride jacket, this network cable ensures long lasting durability. It has excellent attenuation and crosstalk characteristics. This high-performance data communications cable is suitable for noisy environments..Shielded network cable for high bandwidth applications such as 622 ATM, Wideband, Ethernet 1000BASE-T and emerging applications.Cable length: 1000'.Bare wire connector on both the ends.Connectivity: Wired.Conductor size: 24 AWG.Conductor: Solid bare copper, Jacket: Polyvinyl chloride (PVC).Meets RoHS, UL/cUL or ETL, EIA/TIA 568 B.2-1, UL, CSA and ISO/IEC 11801 certifications and standards.Color: Blue.Cable rating: Cat6 - 550 MHz, Fire rating: CMR rated, Outer diameter: 6.6 mm.Conductor DC resistance: 9.8 ohm at 100 m max, Data transfer rate: 3.2 Gb/s.High-performance data communications cable for noisy environments.Excellent attenuation and crosstalk characteristics.Weight: 27 lbs..Comes with lifetime warranty

The Tripp Lite N222-01K-BK 1000' bulk solid-core PVC cable in black, has less impedance and structural return loss than 100 MHz wire. It transfers data at a rate of 128 Mbps..Bulk cable is Ideal for 10/100/1000 Base-T Ethernet, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, EIA/TIA and Token Ring type 3 applications.Dimensions: 1000' cable length.Black CMR-rated PVC jacket.Conductor: 23 AWG 4 twisted pairs solid bare copper.Connections: 1 x bare wire on both ends.Data transfer rate: 1 Gbps.Designed for distributing data, voice and digital video across Gigabit Ethernet networks.Minimum near-end crosstalk.Bandwidth: 550 MHz.RoHS compliant.Comes with lifetime limited warranty

The StarTech WIRC6PATBLRL stranded Cat 6 patch cable in blue, is 1000' long and has PVC jacket for insulation. The cable provides optimal network performance and is perfect solution for emerging gigabit network. This cable is perfect to use in any 10Base-T, 100Base-TX or 1000Base-TX network and in home or office environments..Patch cable is perfect for use in any 10Base-T, 100Base-TX or 1000Base-TX (Gigabit Ethernet) network and in home, office and other environments.Dimensions: 1000'L.Comes in blue color and features polyvinyl chloride jacket with 24 AWG copper conductor for optimum insulation.Bare wire connectors at both the ends for efficient connectivity.Cable rating: Cat 6 - 500 MHz.Stranded cable provides excellent protection.Number of conductors: 4 pair UTP.Fire rating: CMG rated (general purpose).Cat 6 cable is the great way to connect emerging gigabit network.Expertly constructed to offer durability.Cat 6 wire provides the ultimate in network performance.Cat 6 cable improves upon the Cat 5e specification by providing twice the available bandwidth (up to 500 MHz).Contains patch cable.Meets RoHS, EIA/TIA-568 Cat 6 - up to 500 MHz certifications and standards.Comes with lifetime limited warranty

The Comprehensive® CAT6B-1000 bare wire Cat6 solid bulk cable in blue, has a PVC jacket and for added protection. This cable measuring 1000' has 4 twisted pairs solid bare copper conductors that assures high conductivity. The cable is suitable for 10Base-T(IEEE 802.3), 100Base-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN(IEEE 802.12), Token Ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155 and all proposed Category 6 requirements for high-speed, full duplex and parallel transmission protocols..Bulk cable is perfect for 10Base-T(IEEE 802.3), 100Base-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN, Token Ring(IEEE 802.5), TP-PMD(ANSI X3T9.5).Cable length: 1000'.Connections: Bare wire to bare wire.Wired connectivity.Gauge: 24 AWG.Material: PVC jacket, conductor: 4 twisted pairs solid bare copper.Meets Cat6 TIA/EIA, EIA/TIA 568B.2, RoHS standards.Bandwidth: 550 MHz.Conductor resistance: 9.8 Ohm at 100 m.Outer diameter: 6.2 mm.Polyethylene separator for enhanced NEXT, ELFEXT and RL bandwidth.CM/CMG rated for single floor, general purpose use in walls and ceilings.Durable, high-density polyethylene insulation, PVC jacket.Weight: 27 lbs..Comes with lifetime warranty.Blue 1000' bulk cable features durable, high-density polyethylene insulation, PVC jacket.

CAT-5e to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.100' CAT-5e for easy tethering.Comes with a lifetime limited warranty

CAT-5e for seamless connection over a network.Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male network connectors for a flawless connection.100' CAT-5e for easy tethering.Comes with a lifetime limited warranty

CAT-6 for efficient data transfer across a network..Seamless transmission of data at the rate of 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.100' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

Digiwave CAT621100G CAT6 500Mhz Network Cable is uses for connecting a PC, Mac or network device to 10/100/1000 Ethernet networks. Gold-plated copper contacts on the RJ45 male to male connectors provide excellent conductivity for accurate high-speed transmissions. Constructed with high quality material to protect the RJ45 plug of the cable from damage during installation..Patch Network Cable is uses for connecting a PC, Mac or network device.Provide excellent conductivity for accurate high speed transmissions.Constructed with durable material to protect the RJ45 plug of the cable from damage.Delivers reliable performance.Manages to take minimal wall space with its soft and flexible external jacket.Deliver optimum conductivity while eliminating signal loss due to oxidation.High speed transfer rate.Support power over Ethernet.Patch Network Cable for 10/100/1000 Ethernet networks.Cable is ready for use with RJ45 connector installed

10ft Cat6 Snagless Unshielded Network Patch Cable - Gray.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Gray.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in gray color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.29 lbs..Comes with lifetime warranty

Designed for horizontal cable runs in air ducts / conduits / drop ceilings / walls etc.-Plenum fire rating-Supports reliable 550MHz/1 Gbps Ethernet network connections-Compatible w/ Category 5e & Category 6 applications-ETL Verified / 23 AWG / 100% Copper / Lifetime Warranty-Cat6 Ethernet Cable / Bulk Cat6 Cable / Box of Cat6 Cable / Cat6 Plenum Cable / Cat 6 Wire Network Cable / WIRC6CMP / WIRC6-1000 ft / 1000ft / 1000 foot / 1000foot / 1000 feet / 1000feet / 1000' / 1000 ' / 305 m.UL Listed CMP/FT6 Plenum Fire Rating.Supports reliable 550MHz/1Gbps Ethernet network connections.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.ETL verified.High quality 23 AWG copper wire.This bulk Cat6 cable delivers reliable Gigabit network connections, which ensures high-performance capability for your demanding Ethernet applications. The Cat6 cable is plenum rated for in-wall horizontal installations..This plenum-rated Category 6 cable has been tested for CMP (FT6), and is ideal for installation in air plenums, ducts, walls, conduit, drop ceilings, or anywhere CMP fire rating is required. It's perfect for delivering data, voice and video over Gigabit Ethernet networks..Make Gigabit network connections using this high-quality, plenum-rated Cat6 Cable

The N222-01K-WH Cat6 Gigabit Bulk Solid-Core PVC Cable is premium high-speed cabling designed for Cat6 premise applications, such as the distribution of data, voice and digital video across Gigabit Ethernet networks. Designed for fast transmission and excellent signal quality, this white cable ensures peak performance through your LAN (local area network).Manufactured from 23 AWG copper wire, the four-pair solid UTP N222-01K-WH delivers speeds up to 550 MHz/1 Gbps. Protected by a CMR-rated PVC jacket, this cable drastically reduces impedance and structural return loss as compared to standard 100 MHz wire. Near-end crosstalk levels are kept to a minimum, making the N222-01K-WH ideal for 10/100/1000 Base-T Ethernet, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, EIA/TIA and Token Ring Type 3 applications.The N222-01K-WH meets most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6, draft 11)..CMR-rated PVC jacket.High-quality 23 AWG 4-pair solid copper wire.Less impedance and structural return loss than 100 MHz wire.Meets IEEE 802.3ab and ANSI/EIA/TIA 568 standards.Rated for 550 MHz/1 Gbps communications

Tripp Lite N201-100-BL CAT-6 Gigabit Snagless Molded Patch Cable (100ft).Meets Category 6 cabling standards.Premium cabling for CAT-6, CAT-5E & CAT-5 applications.Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 & ETL (Category 6, draft 11).Drastically reduces impedance & structural return loss compared to standard 100MHz wire.Snagless boots protect the locking tabs on the RJ45 male connectors from being damaged during installation.Features molded connectors with integral strain relief.Rated for 550MHz/1Gbps communication.Blue.Lifetime limited warranty.The Tripp Lite N201-100-BL 100' CAT-6 Patch Cable, Blue, is ideal for 10 Gigabit Ethernet networks and provides dependable data transfer.

Achieve Unmatched Network Performance with StarTech 100ft Cat6a Ethernet Cable Elevate your network connectivity with the StarTech 100ft Cat6a Ethernet Cable. Engineered for high-performance and durability, this cable ensures fast, reliable, and secure connections for all your networking needs. Designed to support Multi-Gigabit/Multi-speed connections, this Cat6a cable offers robust protection against electromagnetic interference (EMI/RFI) and noise, ensuring minimal signal loss and consistent performance. The 27AWG pure bare copper wire construction enhances conductivity and reduces resistance, providing reliable data transmission. The snagless connectors with 50-micro gold-plated contacts ensure a precise fit, minimizing wear and maintaining signal integrity. The flexible Low Smoke Zero Halogen (LSZH) jacket is flame-retardant, emitting low smoke and toxic fumes, making it ideal for installations in poorly-ventilated areas, industrial settings, and residential environments. This versatile Cat6a patch cord is perfect for 10GBASE-T networks and supports up to 100W output for Power over Ethernet (PoE++) devices. It is backward compatible with Cat 6 and Cat 5/5e standards, ensuring seamless integration into existing network setups..This Cat6a Ethernet cable is designed for networking use, providing reliable connectivity for high-speed data transmission in both professional and home environments..The cable measures 100 feet in length, offering extensive reach for various networking setups..The cable features RJ-45 connectors on both ends, each with 8 pins, ensuring compatibility with standard Ethernet ports..Constructed with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, the cable is durable and safe for various installations. The true color of the cable is blue..Terminal type 1: RJ-45 male connector on one end. Terminal type 1: RJ-45 male connector on the other end..Supports data transfer rates up to 10Gbps, making it ideal for 10GBASE-T networks and backward compatible with Cat 6 and Cat 5/5e standards..Compatible with 10G switches, Network Attached Storage (NAS), SFP modules, and PoE++ devices. For a full list of compatible devices, refer to the extended description..The cable is Fluke Tested and ETL Verified for guaranteed Cat6a performance. It complies with RoHS, REACH, and CE standards for safety and environmental protection..The cable comes with a lifetime warranty, ensuring long-term reliability and performance.

Achieve Unmatched Network Performance with StarTech 100ft Cat6a Ethernet Cable Elevate your network connectivity with the StarTech 100ft Cat6a Ethernet Cable. Engineered for high-performance and durability, this cable ensures fast, reliable, and secure connections for all your networking needs. Designed to support Multi-Gigabit/Multi-speed connections, this Cat6a cable offers robust protection against electromagnetic interference (EMI/RFI) and noise, ensuring minimal signal loss and consistent performance. The 27AWG pure bare copper wire construction enhances conductivity and reduces resistance, providing reliable data transmission. The snagless connectors with 50-micro gold-plated contacts ensure a precise fit, minimizing wear and maintaining signal integrity. The flexible Low Smoke Zero Halogen (LSZH) jacket is flame-retardant, emitting low smoke and toxic fumes, making it ideal for installations in poorly-ventilated areas, industrial settings, and residential environments. This versatile Cat6a patch cord is perfect for 10GBASE-T networks and supports up to 100W output for Power over Ethernet (PoE++) devices. It is backward compatible with Cat 6 and Cat 5/5e standards, ensuring seamless integration into existing network setups..This Cat6a Ethernet cable is designed for networking use, providing reliable connectivity for high-speed data transmission in both professional and home environments..The cable measures 100 feet in length, offering extensive reach for various networking setups..The cable features RJ-45 connectors on both ends, each with 8 pins, ensuring compatibility with standard Ethernet ports..Constructed with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, the cable is durable and safe for various installations. The true color of the cable is black..Terminal type 1: RJ-45 male connector on one end. Terminal type 1: RJ-45 male connector on the other end..Supports data transfer rates up to 10Gbps, making it ideal for 10GBASE-T networks and backward compatible with Cat 6 and Cat 5/5e standards..Compatible with 10G switches, Network Attached Storage (NAS), SFP modules, and PoE++ devices. For a full list of compatible devices, refer to the extended description..The cable is Fluke Tested and ETL Verified for guaranteed Cat6a performance. It complies with RoHS, REACH, and CE standards for safety and environmental protection..The cable comes with a lifetime warranty, ensuring long-term reliability and performance.

Get the Monoprice 109550 CAT-5e Cable to ensure reliable Ethernet network connections between your system and routers, hubs or switches. Both ends of this networking cable play host to RJ-45 male network connectors for seamless connection between devices. It has a durable and good-quality jacket that preserves the integrity of the high-quality copper conductor..CAT-5e to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male network connectors on both sides for easy connectivity.10' CAT-5e to ensure convenient tethering.Comes with a lifetime limited warranty.The Monoprice 109550 10' 30-AWG CAT-5e UTP Flat Ethernet Network Cable, Black, is ideal for 1000 Mbps networks and provides dependable data transfer.

The Tripp Lite N224-01K-GN 1000' bulk solid-core plenum-rated CMP cable in blue, made of high-quality 24 AWG 4-pair solid copper wire comes with a 350 MHz/1 Gbps rate. It is suitable for all horizontal wiring applications..Bulk cable is ideal for horizontal wiring applications, including 10/100/1000 Base-T Ethernet, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice applications.Dimensions: 1000' cable length.Blue CMP-rated PVC jacket.Conductor: 23 AWG 4 twisted pairs solid bare copper.Connections: 1 x bare wire on both ends.Data transfer rate: 1 Gbps.Designed for distributing data, voice and digital video across Gigabit Ethernet networks.Minimum near-end crosstalk.Bandwidth: 550 MHz.RoHS compliant.Comes with lifetime limited warranty

Achieve Unmatched Network Performance with StarTech 100ft Cat6a Ethernet Cable Elevate your network connectivity with the StarTech 100ft Cat6a Ethernet Cable. Engineered for high-performance and durability, this cable ensures fast, reliable, and secure connections for all your networking needs. Designed to support Multi-Gigabit/Multi-speed connections, this Cat6a cable offers robust protection against electromagnetic interference (EMI/RFI) and noise, ensuring minimal signal loss and consistent performance. The 27AWG pure bare copper wire construction enhances conductivity and reduces resistance, providing reliable data transmission. The snagless connectors with 50-micro gold-plated contacts ensure a precise fit, minimizing wear and maintaining signal integrity. The flexible Low Smoke Zero Halogen (LSZH) jacket is flame-retardant, emitting low smoke and toxic fumes, making it ideal for installations in poorly-ventilated areas, industrial settings, and residential environments. This versatile Cat6a patch cord is perfect for 10GBASE-T networks and supports up to 100W output for Power over Ethernet (PoE++) devices. It is backward compatible with Cat 6 and Cat 5/5e standards, ensuring seamless integration into existing network setups..This Cat6a Ethernet cable is designed for networking use, providing reliable connectivity for high-speed data transmission in both professional and home environments..The cable measures 100 feet in length, offering extensive reach for various networking setups..The cable features RJ-45 connectors on both ends, each with 8 pins, ensuring compatibility with standard Ethernet ports..Constructed with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, the cable is durable and safe for various installations. The true color of the cable is gray..Terminal type 1: RJ-45 male connector on one end. Terminal type 1: RJ-45 male connector on the other end..Supports data transfer rates up to 10Gbps, making it ideal for 10GBASE-T networks and backward compatible with Cat 6 and Cat 5/5e standards..Compatible with 10G switches, Network Attached Storage (NAS), SFP modules, and PoE++ devices. For a full list of compatible devices, refer to the extended description..The cable is Fluke Tested and ETL Verified for guaranteed Cat6a performance. It complies with RoHS, REACH, and CE standards for safety and environmental protection..The cable comes with a lifetime warranty, ensuring long-term reliability and performance.

Connect your computer system to a router, switch or hub with the Monoprice 100134 CAT-5e Cable that offers reliable Ethernet connectivity. This networking cable features an RJ-45 male connector at one end and an RJ-110 female connector at the other, for seamless transfer of signals between devices. Its high-quality copper conductor is sheathed in a sturdy jacket for durability and optimal insulation of the wire..CAT-5e to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male and 1x RJ-110 Female connectors for connecting networking devices.7' CAT-5e to ensure convenient tethering.Comes with a lifetime limited warranty.The Monoprice 100134 7' CAT-5e Ethernet Network Cable, Blue, supports 1000 Mbps networks to provide uninterrupted data transfer.

The C2G® 10' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.25 lbs..Comes with lifetime warranty

N002-010-BK 10ft Cat5e 350MHz Molded Cable RJ45 M/M Black, 10'.Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.10' CAT-5e to ensure convenient tethering.Comes with a lifetime limited warranty.Ensures clean and clear transmissions.Extra-secure connectors.The Tripp Lite N002-010-BK 10' RJ-45 CAT-5e Patch Cable, Black, supports 1000 Mbps networks to provide uninterrupted data transfer.

The C2G 10' red Cat5e snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with FR-PVC jacket truncates both impedance and structural return loss. The cable features 24 AWG stranded bare copper conductor, which minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modem DSL/cables, patch panels and other high-performance networking applications..Category 5e for Network Device.RJ-45 Male.10ft.Red.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, EIA/TIA 568B.2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.23 lbs..Comes with lifetime warranty

CAT-6 for seamless connection over a network..Designed to transmit data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.50' CAT-6 for easy tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

The C2G® 10' male to male category 5e blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 5e.10ft.Blue.Connector on first end: 1 x RJ-45 Male network, connector on second end: 1 x RJ-45 Male network.Device supported: Network device, Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm + 0.15 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.02 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.24 lbs..Comes with lifetime warranty

CAT-5e to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male network connectors on both sides for dependable network connectivity.50' CAT-5e to ensure convenient tethering.Comes with a lifetime limited warranty

CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.10' CAT-6 for easy tethering.Comes with a lifetime limited warranty

The C2G ® two-foot RJ-45 male/male Cat6 black snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.2ft.Black.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.07 lbs..Comes with lifetime warranty

CAT-5e for efficient data transfer across a network..Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.10' CAT-5e to ensure convenient tethering.Comes with a lifetime limited warranty

Comprehensive® Snagless patch cable has molded low profile snagless boot for easy installation. The 24 AWG bare copper stranded cable comes with gold-plated RJ-45 male connector on first and second end for providing uninterrupting connection. The flexible X-traflex PVC jacket of this patch cable facilitates easy installation and is highly durable. Comes in black color for attractive look. Suitable for 1000 BASE-T gigabit Ethernet network applications..Network cable supports voice/data/video distribution applications up to 550 MHz.Easy-to-install 50' long cord.RJ-45 male to male connectors for reliable connections.X-traflex jacket provides double shielding and bare copper strand increases coverage area.Comes in black color for a new look.4 twisted pairs conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.50-micron Gold-plated connector plating for good conductivity.Copper conductor for good conductivity.Offers guaranteed performance with 1000 BASE-T; 100 BASE-T; 10 BASE-T and 4/16 Mbps token ring.Meets all Cat6 TIA/EIA standards, Verified to EIA/TIA 568B.2.Features copper alloy plating with 50u gold contact for durability and has a 6.2mm outer diameter.Supports voice/data/video distribution applications up to 550 MHz, snagless boot for easy installation.Weighs 0.8 lb.Comes with lifetime warranty.Comprehensive® 550MHz Snagless patch cable in black color has RJ45 connector on both ends for easy connectivity. Supports voice/data/video distribution applications up to 550 MHz.

C2G® CAT6 UTP Patch cable in white color connects network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking equipments. The 10' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. HDPE shielding on 24 AWG conductors secure data from electromagnetic and radio frequency interference. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Snagless design of the RJ45 male-to-male connector prevents wear and tear during installation. Suitable for application involving voice, data and video distribution in Ethernet and gigabit network..Network patch cable that protects clips when plugging and unplugging.Easy-to-install 10' long cord.RJ-45 male to male connectors for reliable connections.Ultra flexible PVC jacket offers double shielding against outside noise.Comes in white color for a new look.Network patch cable offers flexibility.Operates at 30 V and 60 Deg C for better operation.2 x 8P8C (RJ45), 4 twisted pair conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.50-micron Gold-plated connector plating for good conductivity.Patch style connector is great for HD video applications.Polycarbonate connector and molded PVC hood for heavy duty use.Has 0.60 mm average thickness and 6.20 mm + or - 0.30 mm outer diameter for ease of use.Meets RoHS Certification and standards.9.38 ohm 100m conductor DC resistance for better performance.Weighs 0.29 lb.Comes with lifetime warranty.C2G® 27163 10' White CAT6 UTP Patch cable supports 10/100/1000 Base-T gigabit network application. Snagless molded RJ-45 male to male connectors offer reliable connection.

Set up a reliable 10 Gbps connection to a switch or networking device, using this Shielded Snagless S/FTP Category 6a Ethernet Cable. Pure Bare Copper Wire Our Snagless Cat6a Cables are designed for long-lasting performance. The 4-Pair Shielded and Foiled Twisted Pair (S/FTP) construction utilizes 27AWG pure bare copper wire for improved conductivity and low resistance, ensuring reliable transmission and minimal signal loss. Pure bare copper wiring offers consistent performance characteristics across different environments. Each pair is shielded in aluminum-mylar foil and tinned copper braid for enhanced EMI protection. Durable Construction The Cat6a Ethernet Cable features snagless 50-micro gold-plated connectors that enable a precise fit to minimize wear and signal loss. The flexible Low Smoke Zero Halogen (LSZH) flame-retardant jacket emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer installations in poorly-ventilated areas including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered..It is used for networking purposes. It provides high-speed data transfer and reliable connectivity for network infrastructure..The cable length 100 feet..Features the following connections: Connector Type: RJ45 Pin Count: 8 pins (standard for RJ45 connectors).Cable is made with a 27 AWG gauge, a Low Smoke Zero Halogen (LSZH) jacket, bare copper conductors, and an White exterior color.High-Speed Data Transfer: Supports data transfer rates up to 10 Gbps (10,000 Mbps)..compatible with a wide range of devices that have RJ45 Ethernet ports. Here are a few examples: Computers (Desktops and Laptops) , Routers , Switches..Comes with a Life time warranty.

Tripp Lite N200-010-BK 10' Black RJ-45 to RJ-45 Male/Male Cat6 Gigabit Molded Patch Cable.Cable length: 10'.Color: Black, Material: PVC jacket.Connectors: One RJ-45 male on both the ends.Conductor: 4 pair 24 AWG stranded UTP with gold-plated copper contacts for accurate signal transfer.Communication: Rated for 550 MHz/1 Gb/s.Designed for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, token ring type 3 and EIA/TIA applications.Flawless signal delivery with minimal near-end crosstalk levels.Molded integral strain relief for long life.RoHS Compliant.Comes with lifetime limited warranty.Comes with lifetime limited warranty

The UISP-Cable-Pro is a Category 5e cable with a highly insulating, weatherproof jacket that prevents damage from rain, snow, and other extreme climatic conditions. The cable is also fortified with internal foil shielding and a drain wire that collectively shield it from electrostatic discharge (ESD) and allow it to maintain Gigabit Ethernet link rates even when electromagnetic interference is present..This cable is perfect for connecting your data devices.Cable length: 1000'.24AWG black cable has copper conductor with polyethylene jacket.Cable is solid and suitable for outdoors.Meets or exceeds ANSI/TIA-568-C.2 and ISO/IEC 11801 standards

Tripp Lite N200-010-BL 10' Blue RJ-45 to RJ-45 Male/Male Cat6 Gigabit Molded Patch Cable.Cable length: 10'.Color: Blue, Material: PVC jacket.Connectors: One RJ-45 male on both the ends.Conductor: 4 pair 24 AWG stranded UTP with gold-plated copper contacts for accurate signal transfer.Communication: Rated for 550 MHz/1 Gb/s.Designed for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, token ring type 3 and EIA/TIA applications.Flawless signal delivery with minimal near-end crosstalk levels.Molded integral strain relief for long life.RoHS Compliant.Comes with lifetime limited warranty.Place document in pouch and insert into laminator.For use with laminators 12.5" entry width size or wider

The C2G ® 25' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. This cable, with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 25'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.71 lbs..Comes with lifetime warranty.The Tripp Lite N002-030-BL 30' CAT-5e RJ-45 Molded Patch Cable, Blue, is apt for 1000 Mbps networks and facilitates error-free data transfer.

Cat5e snagless network patch cable for fast Ethernet network, requiring bandwidth-intensive voice, data/video distribution applications..Cat5e snagless network patch cable for fast Ethernet network, requiring bandwidth-intensive voice, data/video distribution applications.Cable length: 7'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in gray color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.17 lbs..Comes with lifetime warranty

Upgrade your network and enjoy clean and clear transmissions with the Belkin CAT6 Ethernet Patch Cable. This patch cable lets you connect a laptop or desktop computer to a wall outlet, modem, router or another networking device. It meets the CAT6 standard and is suitable for use with 100/1000BASE-T networks. Patch cables are also handy in home offices and hotel rooms to establish a wired Internet connection..7-ft. CAT-6 Ethernet patch cable for connecting to LANs or the Internet.Ideal for use with 100-1000BASE-T networks.RJ45 plugs with 50-micron gold-plated connectors for clear signal.4 twisted pairs of stranded copper wires prevent crosstalk.Snagless design prevents cracking and breaking.CONNECT EASILY TO A COMPUTER NETWORK

The C2G 2' blue Cat6 snagless patch cable has a RJ-45 male connector on each end for reliable connectivity. This cable features a snagless design that protects the connectors from damage and offers long-lasting optimal performance. It also features HDPE insulation and a PVC jacket for durability. The 24-AWG bare stranded copper conductors and 50-micron gold plated copper alloy connectors ensure optimal signal conductivity. This cable is suitable for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, and 4/16 Mbps token ring applications..Category 6 for Network Device.RJ-45 Male.2ft.Blue.RoHS, TIA/EIA-568-B-2.1 and draft 9 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN and 100 Mbps TP-PMD.Comes in blue color.Diameter: 0.98 + 0.05 mm.Voltage: 30 V.Resistance: 9.38 Ohm/100 m, Impedance: 100 Ohm.Mutual capacitance: 5600 pf/100 m.Temperature: 60 deg C.Propagation delay: 545 ns/100 m, Delay skew: 45 ns/100 m.Weight: 0.069 lbs..Comes with lifetime warranty.StarTech.com® PXT101NB10 10' Black power cord with NEMA 1-15P and IEC 60320 C7 connectivity helps to extend your laptop power cord length. 18 AWG cord provides reliable connection.

The C2G ® seven-foot red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. With its 24 AWG stranded bare copper conductor, it minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.7ft.Red.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G ® 14' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 14'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.4 lbs..Comes with lifetime warranty

This C2G 50' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable has a PVC jacket, and it truncates both impedance and structural return loss. It features a 24 AWG stranded bare copper conductor and minimizes near-end crosstalk levels. This patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, and patch panels and is useful for high performance networking applications..Cable length: 50'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 1.38 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Kensington Technology Mobile Tablets Blue Kensington Trapper Keeper Universal Case - Designed with a mead-inspired style

The C2G ® 1' orange Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 1'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in orange color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.05 lbs..Comes with lifetime warranty.Comes with lifetime warranty

The C2G ® 3' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.3ft.Yellow.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty