19-Inch Monitor Mounts

MI-2761 premium monitor desk mount merges functionality with aesthetics. By elevating your monitor above your desk, increase desktop space and get ergonomic positioning of your screens for reduced strain and better sitting posture. Fluid and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Single monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitor to switch between landscape and portrait modes..Screen Sizes: 17" - 32".Fully adjustable counterbalance arm with mechanical spring.Weight capacity: 17.6 lbs..Spring Arm Height adjustable up to 11.5 inches.Tilt: 90 degrees up / 90 degrees down.Swivel: 360 degrees at two joints and 180 degrees at one joint.Rotate: 360 degree (between landscape and portrait modes).Integrated cable management system.Desktop thickness: 0.39-3.3 inches.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty

Mount-It! Large Monitor Desk mount was designed for larger monitors and TVs. Its VESA 200x200 and 200x100 bolting patterns makes it compatible with larger and ultrawide monitors in the size range of 34, 35, 37, 38, 40 and 42 inches. This monitor mount can even be used to install a TV to a desktop for improved safety. Most monitor desk mounts on the market only have VESA 100x100 bolting pattern and are too small to connect to the newer and larger monitors on the market. By elevating the monitor from the tabletop, users can achieve a more ergonomic posture that reduces back and neck pain. Raising a larger monitor off of your desktop also creates more space..Screen Sizes: 17" - 42".Fully adjustable counterbalance arm with mechanical spring.Weight capacity: 22 lbs..Integrated cable management system.Tilt: 85 degrees up / 85degrees down.Swivel: 360 degrees at two joints and 180 degrees at one joint.Rotate: 360 degree (between landscape and portrait modes).Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors.Supported by manufacturer's limited lifetime warranty

Mount-It! MI-789 triple arm (horizontal) monitor mount and stand allows you to clear out your desk space, while providing ergonomic monitor installation height. Say good bye to neck and should pain and increase your productivity with three screens. Heavy duty stand and pole design makes this three monitor mount sturdy. Economical and dependable, mechanical monitor arms allow several height options for placing your monitor in the best ergonomic position, while offering more desktop space. The double link swing arms that support the monitors can be adjusted on the vertical tube for the best height adjustment. The arms and the base come with integrated cable management feature. Cable management system keeps cords organized. The heavy duty weighted metal base as well as the grommet mechanism secures the mount to the desk. The arms that support the monitors can be adjusted on the vertical tube for the best height adjustment. Articulating arms on the sides allow swivel function up to 360 degrees with 15 degrees of tilt at the mounting panel. Specifications: 66 lbs. total carrying capacity. 22 lbs. for each monitor. VESA 75 and VESA 100 bolt pattern compatible. Made from high grade steel and aluminum. Base dimensions: 12.5 inch wide, 13.4 inch deep. The monitors can be installed in either portrait or landscape mode, with interchangeability without having to remove monitors. Kit includes the mount, hardware kit and installation instructions. It is the ideal desk mount for office, reception areas, hospital, retail environments..Triple Monitor Stand fits most of 13" -24" Computer Displays.Tilt, Swivel, Height Adjustable and Rotating Features.Each monitor can tilt up or down 15 degrees and rotate 360 degrees.Rotating the monitor holders allows landscape or portrait positioning.Heavy-duty design supports 66 lbs..Supported by manufacturer's limited lifetime warranty

The Mount-It! MI-785 Hanging Monitor Mount for cubicles is specifically designed to allow you to hang a VESA computer monitor on your cubicle wall with a heavy-duty, adjustable clamp. No drilling required! Simply adjust the clamp hook to fit the top of your cubicle wall, and hang the mount. This screen hanger also has a quick release handle so you can easily adjust your monitor to 10 pre-set heights for the optimal viewing angle. Works with VESA monitors (75x75 and 100x100) from 17" to 32" and supports up to 17.6 lbs..Easily Clamps on Cubicle Divider Walls.RECOMMENDED MONITOR SIZES: 17" - 32".HANGING CLAMP ADJUSTMENT: 1.46" (MIN) - 3.5" (MAX).VESA COMPATIBILITY: 75mm x 75mm, 100mm x 100mm.CAPACITY: 17.6 lbs..ROTATION: +/-180 degrees.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty

The VESA-compliant DDR1327SDD Dual Flat-Screen Monitor Desktop Mount Stand mounts two flat-screen monitors on a sturdy base, allowing you to free up valuable workspace on your desk, table or workstation. Recommended for home or office, the DDR1327SDD fits most flat-panel displays from 13 to 27 inches. Position your monitors with one-touch ease to optimize viewing angle and height to fit your environment and comfort level. A 180 swivel and -45 to +45 tilt capability minimizes glare and provides comfortable viewing from multiple angles. A 360 rotation lets you view your monitors in portrait or landscape orientation. Each VESA mount supports up to 26 pounds. The durable steel frame with scratch-resistant powder-coated finish tolerates frequent handling and blends with any decor. Mounting hardware is included. Conforms to VESA-compliant displays with either of the following mounting hole patterns: 75 x 75 mm and 100 x 100 mm. Features: Mounts 2 Flat-Screen Monitors on a Sturdy Base : Fits most flat-panel TVs, monitors and other displays from 13 to 27 in. Frees up valuable workspace on your desk, table or workstation. Mounting arms adjust independently for viewing angle. Ideal for home or office use. Convenient One-Touch Adjustment : 180 swivel and -45 to +45 tilt capability provide comfortable viewing. Full 360 rotation for viewing in portrait or landscape orientation. Durable Steel Construction : Each mount supports up to 26 lb. Scratch-resistant powder-coated finish blends with any decor. Mounting hardware included. VESA Compliance : Supports the following VESA mounting hole patterns: 75 x 75 mm and 100 x 100 mm. Package Includes: Pole. Base. (2) Mounting arms. Locking head assembly. Pole cable guide. Base collar. (2) VESA plate assemblies. (2) Arm cable guides. (2) End caps. (8) Washers. (18) Screws. Hex key, 3 mm. Hex key, 4 mm. Hex key, 6 mm. Owner's manual..Fits most flat-panel displays from 13 to 27 in..One-touch adjustment for comfortable viewing.Full 360° rotation for viewing in portrait or landscape orientation.180° swivel and -45° to +45° tilt capability provide comfortable viewing.Scratch-resistant powder-coated finish blends with any décor.Supports the following VESA mounting hole patterns: 75 x 75 mm, 75 x 100 mm, 100 x 75 mm and 100 x 100 mm.Each mount supports up to 26 lbs (11.8 kgs).Mounting hardware included.Dimensions (hwd / in.): 18.11" x 31.69" x 10".Dual-Monitor Desktop Mount Stand for 13" to 27" Flat-Screen Displays

Mount-It! dual arm monitor wall mount helps clear out your desktop space and raise two monitors for a more ergonomic installation. Raising monitors to eye level helps prevent common issues such as neck and back pain and eye strain. Dual monitors increase productivity by displaying more information and applications right in front of your eyes. However, dual monitors take up space and if not installed correctly, will require you to switch positions when viewing different screens. Mount-It! monitor wall mount allows two monitors to be installed side by side while utilizing wall space. With the 180 degree rotation, you can switch one of the monitors to portrait mode, while the other in landscape mode. Or, if you are a gamer, you can angle the monitors towards each other to create an immersive view. We utilized the best gas spring components available in the market to make the height adjustment fluid and easy. The tension on the gas spring can be increased or decreased to the adjust the amount of counterbalance for the weight of your monitors - allowing fingertip height adjustment. Dual arm full motion design allows screens to tilt up and down, swivel left and right, as well as the ability to push the monitors towards the wall or extend them away from the wall. You can position the monitors exactly as you wish..Suitable with monitors 17-27 inches in screen size.Screen Rotation: 180 degrees.Monitor weight range: 4.4 lbs. to 14.3 lbs. max..Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Tilt Range: 90 degrees up and 45 degrees down.Swivel Range: 90 degrees left and 90 degrees right.Distance From the Wall: 3.5 inches min - 17.7 inches max.Includes cable management for clutter-free installation.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty.Enjoy a more ergonomic and productive workspace with the Mount-It! dual monitor wall mount.

This flat panel display wall mount will easily install to a single wall stud. It provides full-motion capability through its three articulating joints and the tilt and rotate function at the monitor plate. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Features - Weight capacity: 40 lbs. - Tilt: up 15 degrees up or down - Swivel: 180 degrees at each joint - Rotate: 360 degree - Extension: 2" minimum to 15" maximum from the wall. - Monitor can be installed either in portrait or landscape shape - Fully adjustable arms - VESA Standard: VESA 75 (hole pattern: 75 x 75 mm), VESA 100 (hole pattern: 100 x 100 mm) - The package includes the wall mount, the installation hardware (for connection to the wall and to the monitor), easy to follow installation instructions..Monitor Wall Mount fits most of 12" -24" Computer Displays.Tilt, Swivel, Articulate, Extend, and Collapse Features.Monitor moves 2"-15" from Wall.15 degrees up or down tilt.Weight rated to 40 lbs..Mount-It! MI-2041 Full-Motion Articulating Wall Mount Arm integrates fashion with function, delivering ergonomic performance with style.

This incredibly versatile product supports up to one 26" monitor with a maximum weight of 22 lbs. Not only will this strong and sturdy mount have no trouble holding VESA certified 75x75 or 100x100 monitors, (fitting the above criteria), it is also extremely adjustable! The monitor has 360a degrees rotation (meaning landscape, portrait, or anything in-between)..Country of Origin: Taiwan.Device Supported: Flat Panel Display.Maximum Load Capacity: 22 lb

This incredibly versatile product supports up to 26" monitors with a maximum individual weight of 22.1 lbs. Not only will this strong and sturdy mount have no trouble holding VESA certified 75x75 or 100x100 monitors, (fitting the above criteria), it is also extremely adjustable! Each monitor can be placed at a different height to accommodate different sized monitors..Compatibility: LCD/LED Monitors.Country of Origin: Taiwan.Device Supported: Flat Panel Display

Transform your workspace with the ProFlex Series Heavy-Duty Monitor Arm, designed for ultrawide and standard monitors from 17” to 49”. Built from high-strength steel and aluminum, this ergonomic monitor mount supports up to 44 lbs., ensuring a stable and secure hold for even the heaviest screens. The fully adjustable gas spring arm allows for seamless height adjustment, tilting, swiveling, and screen rotation, so you can achieve the perfect viewing angle for work, gaming, or multitasking. This premium desk mount features both C-clamp and grommet installation options, fitting most desks between 0.4” to 3.35” thick for a versatile, space-saving setup. The built-in USB 3.0 and USB-C ports provide convenient access for charging and connecting devices, reducing clutter and improving efficiency. Plus, the integrated cable management system keeps wires neatly organized for a clean, professional look. Ideal for professional workstations, home offices, and gaming setups, the ProFlex Series monitor arm delivers exceptional durability, smooth movement, and a modern matte black finish that enhances any workspace..This heavy-duty gas spring monitor arm securely holds one monitor and is designed to improve ergonomics and maximize workspace efficiency in home offices, gaming stations, and professional environments..Supports a single monitor from 17" to 49" ultrawide, accommodating displays up to 44 lbs. in weight..Features a height range of 10.5" to 21.65" for customized viewing comfort..Constructed from durable steel and aluminum with a sleek matte black finish for strength and style..Provides full-motion adjustability with +50°/-20° tilt, ±180° swivel, and ±180° screen rotation for optimal viewing flexibility..Includes integrated cable management channels to keep cords neatly organized and out of sight..Supports monitors weighing from 4.4 lbs. up to 44 lbs..The mount is Compatible with 75x75 and 100x100 mm VESA mounting patterns..Features integrated USB 3.0 and USB-C ports for quick charging and easy peripheral connectivity..Includes dual mounting options (C-clamp and grommet) to fit most desks for a secure, space-saving installation..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by Manufacturer's Limited Lifetime Warranty..Enhance your workspace with the Mount-It! ProFlex Heavy-Duty Monitor Arm, engineered for large ultrawide screens, effortless adjustability, and a clean, modern setup.

This dual monitor wall mount features two swivel arms for smooth full motion monitor adjustments. From monitor tilt to swivel and rotation, this monitor wall mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and maximizing space in the office or at home. This premium dual monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen each of the monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. Each arm features a cable management port to hide and organize cables for a clean look. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Dual Monitor Wall Mount fits most of 13" -27" Screens.Tilt, Swivel, Height Adjustable and Rotating Features.Each monitor can tilt up or down 105 degrees and rotate 360 degrees.Load capacity 44 lbs..Compatible with the Mount-It! Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.10-year manufacturer limited warranty

Rotate, tilt, swivel and adjust monitors by using this stand, and create an optimized workspace that is personalized for each employee. This Mount-It! stand is designed to support 13 to 24-inch monitors and is ideal for most desktops..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 24" monitors for versatile use.Made of metal for durability.-15 to 15 degrees tilt, 360 degrees pan, and 360 degrees rotation adjustment options enable for optimal viewing.Compatible with the standard VESA mounting patterns: 100 x 100, 75 x 75.Black finish adds to its overall aesthetic appeal.Supported by manufacturer's limited lifetime warranty.Increase productivity while reducing desktop clutter by using this Mount-It! dual monitor desk stand.

Working in an ergonomic environment doesn't need to be costly. The installation of this mount is quick, and you can adjust it in all angles to suit your viewing needs. Simply clamp the mount onto the edge of your desk, and allow the gas spring arm to do the heavy lifting. The full range of motion allows you to move the monitor from a landscape to portrait position if needed. See how this mount can help reduce strain in your eyes and neck today..Raise your monitor to a comfortable viewing height with this monitor mount.Supports screens from 17" to 32" monitors for versatile use.Height adjusts from 7.5" to 17.5" for comfortable viewing.Made of aluminum, steel, and plastic.Tilt and swivel functions enable adjustments for comfortable viewing.Total weight capacity: 35.2 lbs. (17.6 lbs. per monitor).Compatible with: VESA 75 x 75, 100 x 100 (mm) mounting patterns.Comes in black.Supported by manufacturer's limited lifetime warranty.Switch Between Landscape and Portrait Modes Effortlessly, Our MI-2672 dual monitor Mount easily Adjust Your Monitor’s Height, Tilt, and Swivel for Perfect Viewing

MI-1772 is one of our premium desk mounts that merges functionality with aestatics. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Dual side-by-side monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitors independently to switch between landscape and portrait modes. By elevating your monitors above your desk, increase desktop space and get ergonomic positioning of your screens fore reduced strain and better sitting posture..Dual Monitor Desk Mount Stand fits most of 13" -32" Displays.Tilt, Swivel, Full Motion and Rotating Features.Dual base allows c-clamp or grommet connection.Height Adjustable to 13".Holds monitors up to 19.8 lbs. per arm.Supported by manufacturer's limited lifetime warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Height Adjustable Full-Motion Articulating Desk Mount integrates fashion with function, delivering ergonomic performance with style.

MI-45111B dual monitor mount features two gas spring arms for smooth full motion monitor adjustments. The extra long mounting pole measures 20.5”, allowing for a large height adjustment range. From height adjustment, to monitor tilt, swivel and rotation, this monitor desk mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and clearing up more desk space by elevating the monitors. This premium dual monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The c-clamp base easily attaches to any desk measuring.79” to 2.36” thick, making it an easy addition to any workspace. It also includes a grommet base that securely attaches to a desktop hole opening. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Computer Dual Monitor Desk Mount fits most of 13" -27" Screens.Tilt, Swivel, Height Adjustable and Rotating Features.Each monitor can tilt up or down 105 degrees and rotate 360 degrees.Load capacity 39.6 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Raise your monitors to an ergonomic position and free up desk space with this stackable dual monitor mount. Designed for performance, this mount is made from aluminum and steel for sturdy use. This mount includes both clamp and grommet installation components to fit a variety of desktops. Gas spring allows for smooth and easy height adjustment. Tilt and swivel functionality offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop. Screen Sizes: 17" - 32", VESA Compatible: 75x75, 100x100, Monitor Weight Capacity: 17.6 lbs. (per screen),Tilt: +35°~-35°, Swivel: +90°~-90°, Screen Rotation: +180°~-180°, Arm Extension: 19.5" - 21", and Material: Aluminum, Plastic, Steel..DUAL MONITOR ARM MOUNT DESK STAND: Fits two monitors up to 32" in size, with a maximum support weight of 17.6 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Comes with interchangeable C-clamp (for desktops up to 3" inches thick) or grommet (up to 1.5" thick) base mounts..WELL-DESIGNED: Vertical monitor mount has counterbalanced, gas spring arms for effortless adjustments, and screens can be stacked in a vertical or horizontal configuration. Comes with integrated cable management and is made out of heavy duty steel and aluminum alloy..FULLY ADJUSTABLE: Vertical dual monitor stand can tilt up and down 35 degrees in either direction, swivel left and right 360 degrees, and raise or lower a total of 14.2 inches. Monitors can be rotated 180 degrees for portrait or landscape orientation independent of each other..EASY INSTALLATION: Double monitor mount comes with all mounting hardware, tools, and instructions necessary for assembly. Turn hex bolt on top of gas springs to set the counterbalance and hold screens in place..Supported by manufacturer's limited lifetime warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Boost Ergonomics & Desk Space with Our Dual Monitor Mount. Perfect for Home Offices, Professional Set ups, Commercial Set ups to name a few.

MI-31114-BLK low-profile single monitor wall mount features tilt, swivel and rotation to achieve the perfect monitor placement throughout the day. Mounting your monitor on the wall frees up desk and office space and raises your monitor to eye level, for a healthier way to work by helping you to maintain a better posture. This premium single monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. Heavy load capacity carries up to 44lbs and only requires one wall stud for easier installation. Fits monitors up to 32”..Single Monitor Wall Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Articulating Features.Each monitor can swivel 180 degrees and rotates 360 degrees.Monitor can be installed either in portrait or landscape shape.Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Relieve neck and back pain while freeing up desk space by mounting your monitor on the wall. This Mount-It! single-monitor wall mount can tilt, swivel, and rotate for versatile positioning. It features a gas-spring arm for effortless height adjustment and includes integrated in-arm cable management for a neat and organized appearance. Installation is easy with a single-stud wall plate and detachable VESA bracket. The sturdy aluminum and high-strength steel construction will stand the test of time. Turn the hexagonal bolt at the base of the gas-spring arm to adjust the tension to hold the monitor in place..Single-monitor wall mount helps you adjust your monitor to fit your needs.Fits monitors up to 32".Gas-spring arm allows for effortless height adjustment up to 11".Made of aluminum, steel, and plastic; comes in black.Tilt angle: +/-35 degrees; swivel: +/-180 degrees; rotation: +/-180 degrees.Compatible VESA patterns: 75 x 75mm and 100 x 100mm.Rotate between portrait and landscape orientation with ease.In-arm cable slots keep your space organized.Installing your monitor is quick and easy with a detachable plate.Extension from wall: 3.9"-20.5".Maximum weight capacity: 17.6 lbs..Supported by manufacturer's limited lifetime warranty

The ProFlex Series Heavy-Duty Monitor Mount is designed for professionals who need maximum screen space without sacrificing desk real estate. Supporting screens up to 49” - ultrawide monitors included - this monitor desk mount creates a productive workspace, ideal for trading, content creation, coding, and after-work gaming. The 17.3” pole provides a stable, height-adjustable foundation, while the gas spring arm delivers smooth full-motion adjustments for the perfect viewing angle. Built from high-strength steel and aluminum, this heavy-duty mount holds up to 44 lbs., ensuring rock-solid stability for even the largest displays. The integrated USB 3.0 and USB-C ports offer convenient device connectivity, while the cable management system keeps your setup clean and organized. With both clamp and grommet mounting options included, it fits desktops from 0.4” to 3.35” thick, making it a versatile choice for home offices, professional workstations, and high-performance gaming setups. Upgrade to ProFlex today and experience superior ergonomics, increased productivity, and an ultra-modern workspace!.This heavy-duty monitor mount with pole and gas spring arm is designed to enhance ergonomic comfort and productivity for professionals, gamers, and creators who need precise screen positioning..Supports one monitor from 17" to 49", including ultrawide displays, with a weight capacity of up to 44 lbs..Features a 17.3" pole and a gas spring arm that together provide flexible height adjustments for customized viewing comfort. It offers a versatile height range from 5.1" to 28.1", allowing you to easily position your monitor at the perfect viewing level..Constructed from premium-grade steel and aluminum with a matte black finish for strength, stability, and style..Provides full-motion adjustability with +50°/-20° tilt, ±180° swivel, and ±180° screen rotation for optimal viewing flexibility, enabling precise positioning and customized viewing..Includes an integrated cable management system that keeps wires neatly routed and your desk clutter-free, for a clean, professional setup..Supports monitors up to 44 lbs. for heavy-duty performance..The mount is Compatible with 75x75 and 100x100 mm VESA mounting patterns..Features integrated USB 3.0 and USB-C ports for quick charging and easy peripheral connectivity..It includes both clamp and grommet mounting options, allowing versatile installation on desks up to 3.35" thick for clamp mounting and up to 1.9" thick for grommet mounting..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by Manufacturer's Limited Lifetime Warranty..Upgrade your setup with the Mount-It! ProFlex Heavy-Duty Monitor Mount, crafted for superior ergonomics, full-motion flexibility, and a cleaner, more productive workspace.

Whether you are working from home or in an office, this dual monitor stand with spring assisted height adjustment allows you to set your monitor height to your personal ergonomic viewing position. It comes with a stable, freestanding base which means you can easily place it anywhere without having to worry about clamp or grommet mounting. The monitor stand fits two screens between 17" and 32" in size with a weight between 4.4 and 17.6 lbs each and comes with a quick release VESA plate (75x75 & 100x100) for easy installation. An integrated handle allows for quick and easy height adjustment and the sliding horizontal bar enables you to seamlessly align your screens. If you ever want to turn your screens to share them or reduce glare, the integrated swivel feature allows for up to 25° rotation left and right. The screens themselves can be rotated 180° left and right so that you can view them in horizontal as well as vertical orientation. Keep your cords organized and your workplace neat with the integrated cable management..This freestanding dual monitor arm with stable base allows you to adjust height and alignment of your screens for an ergonomic viewing experience.It is compatible with monitors from 17" to 32" and up to 17.6 lbs each.Height-adjustable via spring-assisted mechanism, Min of 12.40" to 18.30".The monitor arm is finished in black and constructed from durable steel for stability..The monitors can swivel up to 25° left and right, rotate fully 360° for horizontal or vertical viewing orientation, and feature horizontal rotation up to 180° left or right, Tilt: +/-10°, Swivel: +/-25°.Each monitor arm supports screens weighing up to 17.6 pounds..Compatible with standard VESA mount patterns measuring 75x75mm and 100x100mm..Perfect for office and home use.An integrated cable management system keeps your cords organized and the quick release VESA plate ensures easy monitor installation.Supported by Limited Lifetime Warranty.Make Your Workday Easier with an Adjustable Dual Monitor Arm!

MI-321116 single monitor desk mount features an articulating arm for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor mount is designed to position your monitor perfectly for a healthier, more comfortable way to work. Save desk space while improving posture by elevating your monitor off of the desk to eye level. The arm can extend out up to 22.5” for a long reach, great for larger desks or team collaboration. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. Features both a c-clamp and grommet base to adapt to multiple desktop surfaces. Heavy-duty aluminum construction fits monitors up to 32” and can hold up to 19.8lbs..Single Monitor Desk Mount fits most of 13" -27" Screens.Tilt, Swivel, Full Motion and Height Adjustable Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 30 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Get the optimized viewing height of two displays with this adjustable mount that allows for monitors to be mounted in either portrait or landscape orientation. This stand delivers height and tilt adjustments and each mounted screen can swivel 180 degrees. Desk space is kept neat and tidy with the innovative cable management system of this Mount-It! dual monitor mount. This 2 monitor mount works with screens 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 inches in size, with a maximum support weight of 17.6 pounds each arm, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Two monitor stand has full motion, height adjustable arms that are made of heavy duty steel and have integrated cable management clips on each arm to keep your cables organized. Comes C-clamp base for use on desktops up to 3.5" inches thick. The double monitor mount arms can tilt up and down 15 degrees, swivel a full 360 degrees, raise and lower a total of 17" inches, and each screen can be placed in portrait or landscape orientation independent of one another..Raise your monitor to a comfortable viewing height with this dual monitor desk mount.Supports up to 27" monitors for versatile use.Heavy-duty cold-rolled steel construction with plastic elements that will outlast many screens to come.A +80/-80 degree tilt, 180-degree pan, and 360-degree rotation adjustment options enable for optimal viewing.Each arm securely holds up to 17.5 lbs. to fit most monitors (35 lbs. total load on height-adjustment assembly).Dimensions: 17.25"H x 34"W (fully extended).Compatible with standard VESA mounting patterns: 75 x 75, 100 x 100.Meets VESA MIS-D mounting standard.Black finish completes overall aesthetic appeal.Single bolt with hex key provides 17" of height adjustment.C-clamps secure the mount to the edge of the desk without the need to drill.Comes with an integrated cable-management wire clips to keep your work area tidy.Supported by manufacturer's limited lifetime warranty

MI-33114 single monitor wall mount features a full motion arm for smooth and versatile monitor adjustments. Adjust the height, tilt, swivel and rotation of the monitor to find the perfect placement. Mounting to the wall not only raises your monitor to eye level for a healthier way to work, but it maximizes office and desk space. This premium monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen the monitor-mounting arm, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. The arm features a cable management port to hide and organize cables for a clean look. Fits monitors measuring in size up to 32” and can hold up to 19.8lbs..Single Monitor Wall Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 44 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Upgrade your workspace with this single monitor arm, designed to provide ergonomic positioning and free up valuable desk space. Unlike bulky built-in stands, this adjustable monitor mount lets you easily set your screen at the ideal height along its 16-inch pole, reducing neck and eye strain for a more comfortable workday. Enjoy full motion flexibility allowing you to find the perfect viewing angle whether you’re working, gaming, or multitasking. The VESA-compatible mount supports monitors up to 32 inches and 19.8 lbs., and its space-saving clamp or grommet base ensures a secure, clutter-free setup. Plus, integrated cable management keeps wires organized for a sleek, professional look..This is an adjustable monitor desk mount designed to support ergonomic screen positioning, and it includes both a C-clamp and grommet mounting base, as well as integrated cable management for a clean and efficient workspace..The mount supports one monitor ranging from 17" to 32" in size. Holds monitors up to 19.8 lbs..The screen can be mounted anywhere along the 16-inch vertical pole to achieve your desired ergonomic height..The item is available in black or white and is made of durable steel..It offers full motion adjustability, including ±160° swivel, +40°/-40° tilt, 360° screen rotation, and flexible pivot positioning to achieve an optimal viewing angle..This mount is VESA-compatible with both 75x75mm and 100x100mm patterns..The mount holds monitors up to 19.8 lbs., making it suitable for most standard and curved screens..Its dual mounting options (clamp or grommet) allow flexible installation on various desk types..Integrated cable management channels keep cords organized and out of sight, supporting a tidy, professional setup..Supported by Limited Lifetime Warranty.From home office to late-night gaming! This monitor arm keeps up with your lifestyle.

This single monitor desk mount features a full motion arm with smooth, full motion adjustments including height, tilt, swivel and rotation. This desk mount is designed to position your monitor perfectly for a healthier, more comfortable way to work throughout the day. Save desk space while improving posture by elevating your monitor off of the desk to eye level. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The grommet base easily attaches to any desk from 1” to 2” thick, making it an easy addition to any workspace. Heavy-duty aluminum construction gives this mounting arm a 30lb load capacity, plenty for most monitors on the market and fits monitors up to 32”..Single Monitor Desk Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Height Adjustable Features.Each monitor can tilt up or down 15 degrees and rotates 360 degrees.Load capacity 30 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.10-year manufacturer limited warranty

Maximize desk space and create a clean, clutter-free workstation with this ProFlex Series wall-mounted single monitor arm. Designed for offices, home setups, medical facilities, warehouses, and retail spaces, this heavy-duty monitor arm securely supports standard and ultrawide monitors up to 49” and 44 lbs., making it a versatile solution for professional and gaming setups alike. The gas spring arm allows for effortless height, tilt, swivel, and rotation adjustments, letting you achieve the perfect ergonomic viewing angle to reduce neck and eye strain during long hours of work or play. It can be installed on a single wood stud or on solid walls, ensuring a flexible and reliable setup while keeping valuable desk space open. Built for performance and durability, this mount is crafted from high-strength steel and aluminum and features an integrated cable management system to keep wires organized and out of sight. With its modern matte black finish, the ProFlex wall-mounted monitor arm is the perfect blend of durability, adjustability, and style for any workspace..This is a heavy-duty single monitor wall mount with a built-in gas spring arm from the ProFlex Series, designed to free up desk space while providing ergonomic screen positioning for workstations, gaming setups, and commercial environments.Supports one monitor ranging from 17" to 49", including ultrawide displays..Securely holds standard and ultrawide monitors up to 44 lbs..Built from strong materials with a stylish matte black finish.Perfect for offices, medical facilities, warehouses, retail spaces, and home setups needing flexible monitor positioning.Securely mounts to a single stud or solid wall, ensuring a sturdy and reliable setup.Built-in cable management system keeps cords neatly organized for a clean and professional appearance..Customize your monitor height and angle to reduce neck and eye strain for long hours of use.Supported by Manufacturer's Limited Lifetime Warranty.Space-Saving Wall Mount for Ultrawide Monitors with Smooth Gas Spring Adjustability!

Enhance your workstation with the MI-2762 dual monitor mount. Effortlessly tilt, swivel, and rotate your screens while maintaining a clutter-free desk with built-in USB 3.0 ports and easy installation..Fits monitors from 19" to 32".2 x USB 3.0 ports for easy connection of your devices.11.5 Inches of Height Adjustment.VESA 75x75 and 100x100 compatible..Weight capacity: 4.4 to 17.6 lbs. for each arm.Tilt: 90 degrees up / 90 degrees down.Swivel: 360 degrees at two joints and 180 degrees at one joint.Rotate: 360 degree (between landscape and portrait modes).C-Clamp and Grommet base options included.Easy to install. All hardware for installation and instructions provided.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty.Ergonomic Dual Monitor Mount with Height Adjustment & USB 3.0 Ports. Ideal for offices, reception areas, hospitals, retail environments and modern homes.

MI-35111B single monitor mount features a gas spring arm for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor desk mount is designed to position your monitor perfectly for a healthier, more comfortable way to work. Save desk space while improving posture by elevating your monitor off of the desk to eye level. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The grommet base easily attaches to any desk up to 3” thick, making it an easy addition to any workspace. Fits monitor’s up to 32” and can carry up to 19.8lbs..Single Monitor Desk Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Maximum extension: 11.5 inches.Load capacity 19.8 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Turn your workspace into a comfortable and ergonomic environment with the MI-1771 monitor mount. Say goodbye to eye and neck strain and keep your monitor at a comfortable eye-level since this mount is height adjustable up to 13". The heavy-duty design supports up to 20 lbs. with ease. The base comes with a C-clamp that can also be used as a grommet and can be mounted on tables up to 3.3" thick. The arm features clips for cable management to help keep your desk looking clean and tidy. Depending on the user and desk height, this mounting bracket can be used for sit-stand desk applications. Monitor orientation can be changed from landscape to portrait any time necessary..This monitor mount is compatible with VESA patterns 75 x 75 and 100 x 100 and supports LCD and LED displays ranging from 13" to 32"..The monitor mount allows full 360-degree rotation for easy landscape or portrait screen positioning. The screen can be tilted up to 90 degrees upward or downward to reduce glare and achieve optimal viewing angles..The mount installs easily using either a C-clamp or grommet base and fits desks up to 3.3 inches thick..The arm can be raised or lowered up to 13 inches for customizable viewing comfort..The sturdy gas spring arm supports monitors weighing up to 20 pounds..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Transform Your Workspace with the Mount-It! Gas-Spring Single Monitor Desk Mount, Effortless Movement, Maximum Comfort

MI-33111-BLK single monitor desk mount features a single articulating arm with smooth, full motion adjustments including height, tilt, swivel and rotation. This desk mount is designed to position your monitor perfectly for a healthier, more comfortable way to work throughout the day. Save desk space while improving posture by elevating your monitor off of the desk to eye level. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The grommet base easily attaches to any desk up to 3.5” thick, making it an easy addition to any workspace. Fits monitors up to 32” with a weight capacity of 19.8lbs..Max Screen Size 30 inches.360 degree swivel.Extension 16 inches.Height adjustable 8 inches.Load Capacity 28 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty.Monitor Mount

This dual monitor wall mount features two gas spring arms for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor wall mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and maximizing space in the office or at home. This premium dual monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen each of the monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. Each arm features a cable management port to hide and organize cables for a clean look. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Weight capacity: 19.8 lbs. for each monitor.Tilt: up 90 degrees to down 20 degrees.Swivel: 360 degrees at two joints and 180 degrees at one joint.Rotate: 360 degrees.Height adjustable up to 11.5".Integrated cable management system.Monitor can be installed either in portrait or landscape shape.VESA Standard: VESA 75 (hole pattern: 75 x 75 mm), VESA 100 (hole pattern: 100 x 100 mm).Weight capacity: 19.8 lbs. for each monitor.Compatible with the Mount-It! Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.10-year manufacturer limited warranty

Mount-It! MI-2781 helps raise your monitors to an ergonomic position and work more efficiently with this dual monitor stand. Designed for performance, this monitor stand is made from high-strength steel for durability. Freestanding base sits on top of any desktop for quick installation. The arms can be raised or lowered on the pole for easy height adjustment. Tilt and swivel offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop.All necessary instructions and hardware included.Screen Sizes: 13" - 32"VESA Compatible: 75x75, 100x100Monitor Weight Capacity: 17.6 lbs. (per screen)Tilt: +45°~-45°Swivel: +90°~-90°Screen Rotation: +180°~-180°Pole Height: 18.3"Material: Steel.ERGONOMIC DUAL MONITOR MOUNT: Raise your monitors/screens to the optimal viewing height to reduce neck stain and back stiffness. Cable management clips keep your desk neat organized..STURDY SUPPORT and HIGH QUALITY CONSTRUCTION: Heavy-duty steel monitor mount can support to 32" monitors for versatile use with a weight capacity of 17.6 lbs. per arm for a total capacity of 35 lbs..FULLY ADJUSTABLE: Monitor arms have arms which tilt +/- 45 degrees, swivel left-right 360 degrees, and can be raised and lowered on the 18.3" center pole, offering a more ergonomic positioning of your computer screens, while saving room on your desktop. Each screen can be placed in portrait or landscape orientation independent of one another..WIDELY COMPATIBLE: Works with screens from 17" to 32" in size and works with the standard 75x75mm or 100x100m VESA square bolt hole patterns.EASY INSTALLATION: 2-monitor stand comes with all mounting hardware, tools, and instructions necessary for assembly. Mounting plates can be removed, attached to monitors and reattached to the stand in just a few minutes. Stable freestanding base supports use on desktop..Supported by manufacturer's lifetime limited warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Mount two 13" to 32" LCD displays on your desk with this Mount-It! dual monitor desk stand LCD mount to improve productivity.

This single arm monitor wall mount helps clear out your desktop space and raise your monitor for a more ergonomic installation. Raising monitors to eye level helps prevent common issues such as neck, back pain, and eye strain. We utilized the best gas spring components available in the market to make the height adjustment fluid and easy. The tension on the gas spring can be increased or decreased to the adjust the amount of counterbalance for the weight of your monitors - allowing fingertip height adjustment. The full motion design allows tilt up and down, swivel left and right, as well as the ability to push the monitor towards the wall or extend them away from the wall. You can position the monitor exactly as you wish. The slide-in VESA plate allows you to install the wall mount to the wall, connect the plates to your monitor and slide the monitor into the wall mount with easy..Single Monitor Wall Mount fits most of 13"-32" Screens.Tilt, Swivel, Full Motion and Height Adjustable Features.Each monitor can tilt up 90 degrees or down 45 degrees and rotates 180 degrees.Distance From the Wall: 3.5"es min, 17.7"es max.Load capacity 14.3 lbs..Supported by manufacturer's limited lifetime warranty

Small Articulating Desk Mount That’s Built Tough The MI-705 is one of Mount-It! S most durable, single monitor mounts that will assist you with creating open desk space and functionality. This adjustable mount allows you to easily adjust the viewing height to an ergonomic level to help reduce neck, back and eye strain with an adjustable arm that folds and extends up to 15" that can swing into any position. Features The MI-705 features a thick grade of steel, with a black powder coat for scratch resistance. This desk mount is constructed with a sturdy C-clamp that allows you to conveniently attach it to any desk to maximize your work space. Maximum thickness of mounting surface for desk clamp, 2.25". It also includes all of the necessary hardware with an instructional manual. Specifications The MI-705 fits most flat screen monitor from 13" to 30" with the VESA of 50x50 and 100x100mm, with the weight capacity of 33 lbs. This mount has a c-clamp, and adjustable pole to easily adjust the height level from 8.75" to 15" with an arm that extends 14.8" that can be swiveled 360 degrees. It also, provides you the ability to adjust your monitor by tilting it up to 12 downward degrees..SINGLE MONITOR ARM MOUNT: Fits one computer screen sizes 19-30 inches, with a maximum support weight of 33 pounds, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. (measure distance, in millimeters, between bolt hole patterns if unsure of size).INTUITIVE FEATURES: VESA monitor stand is height adjustable and can be raised from 13" inches up to 18.5" inches. Cold-rolled steel construction is heavy duty and will stand the test of time. Comes with C-clamp base mount for use on desktops 1" - 2" inches thick..FULLY ADJUSTABLE: Monitor arm desk mount can tilt 15 degrees up and down, swivel 360 degrees on three different joints, and raise and/lower 5.5" inches..EASY INSTALLATION: Monitor swing arm comes with all mounting hardware, tools, and instructions necessary for assembly..Supported by manufacturer's limited lifetime warranty

MI-35114 single monitor wall mount features an articulating gas spring arm for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor wall mount is designed to save space while improving posture by raising the monitor to eye level in any type of environment. This premium monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen the monitor-mounting arm, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. The arm features a cable management port to hide and organize cables for a clean look. Fits monitors measuring in size up to 32” and can hold up to 19.8lbs..Single Monitor Wall Mountcompatible with screens up to 32".Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 20 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Mount-It! Dual Monitor Stand (MI-2781B) allows you to adjust two monitors to the optimal viewing height, clearing desk space and enabling the most comfortable work place experience..ERGONOMIC DUAL MONITOR MOUNT: Raise your monitors/screens to the optimal viewing height to reduce neck stain and back stiffness. Cable management clips keep your desk neat organized..STURDY SUPPORT and HIGH QUALITY CONSTRUCTION: Heavy-duty steel monitor mount can support to 32" monitors for versatile use with a weight capacity of 17.6 lbs per arm for a total capacity of 35.2 lbs.FULLY ADJUSTABLE: Monitor arms have arms which tilt +/- 80 degrees, swivel left-right 360 degrees, and can be raised and lowered on the 15.5" center pole, offering a more ergonomic positioning of your computer screens, while saving room on your desktop. Each screen can be placed in portrait or landscape orientation independent of one another..WIDELY COMPATIBLE: Works with screens from 19" to 32" in size and works with the standard 75x75mm or 100x100m VESA square bolt hole patterns.EASY INSTALLATION: 2-monitor stand comes with all mounting hardware, tools, and instructions necessary for assembly. Stable freestanding base supports use on desktop..Supported by manufacturer's lifetime limited warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Quick Installation and Superior Screen Positioning with MI-2781B Dual Mount for Enhanced Productivity and Comfort

MI-45111 dual monitor mount features two gas spring arms for smooth full motion monitor adjustments. The extra long mounting pole measures 20.5”, allowing for a large height adjustment range. From height adjustment, to monitor tilt, swivel and rotation, this monitor desk mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and clearing up more desk space by elevating the monitors. This premium dual monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The c-clamp base easily attaches to any desk measuring.79” to 2.36” thick, making it an easy addition to any workspace. It also includes a grommet base that securely attaches to a desktop hole opening. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Dual LCD Computer desk stand for 30" screens. 19.8lb load capacity per monitor.Height adjustable gas spring arm with 11.5" of height adjustability.Rotate portrait-to-landscape, pivot 360 degrees, and tilt 30 degrees.Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

MI-43116 dual monitor mount features two full motion arms to create a more customized workspace. The extra long mounting pole measures 20.5”, allowing for a large height adjustment range. From height adjustment, to monitor tilt, swivel and rotation, this monitor desk mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and clearing up more desk space by elevating the monitors. This premium dual monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The c-clamp base easily attaches to any desk measuring.79” to 2.36” thick, making it an easy addition to any workspace. The heavy-duty aluminum construction is designed to withstand heavy-use and to withstand the test of time. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Dual Monitor Desk Mount fits most of 13" -27" Computer Screens.Gas Spring Arms have Tilt, Swivel, Height Adjustable and Rotating Features.Each monitor can tilt up or down 105 degrees and rotate 345 degrees.Load capacity 39.6 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Enjoy higher workspace efficiency with our ProFlex Series Heavy-Duty Dual Monitor Wall Mount, designed to perfectly align two monitors from 17” to 32” side by side. Its wall-mounted design frees up valuable desk space, creating a clutter-free and organized workstation perfect for offices, trading setups, control centers, medical facilities, and more. The adjustable crossbar system ensures precise side-by-side monitor alignment without gaps, delivering a seamless dual-screen viewing experience with ergonomics in mind. The gas spring arm provides smooth height adjustment, tilt, swivel, and effortless screen sharing, allowing users to customize their setup for optimal comfort. By positioning monitors at the perfect ergonomic height, this mount helps improve posture and minimize neck and eye fatigue, making long work sessions more comfortable. Engineered for stability and durability, this monitor mount secures firmly to a single stud or solid wall, ensuring a wobble-free, professional-grade setup. Constructed from high-strength steel and aluminum, it features a modern matte black finish that blends seamlessly into any workspace environment..This is an adjustable dual monitor wall mount with gas spring arms and a crossbar from the ProFlex Series, designed to free up desk space while ensuring precise side-by-side screen alignment.Supports two monitors from 17" to 32" using a dual-arm system with sliding crossbar. Holds monitors up to 19.8 lbs. per arm.Constructed from premium materials with a sleek matte black finish to complement any environment.Ideal for offices, trading setups, control centers, medical facilities, and more.Mounts securely to a single stud or solid wall.Gas spring arm enables easy height adjustment and effortless screen sharing.The adjustable sliding rail allows you to position two monitors side by side without gap.Compatible with VESA 75x75mm and 100x100mm mounting patterns..Integrated cable management helps keep wires organized and your workspace clean..Supported by Limited Lifetime Warranty.Perfect Dual-Monitor Wall Mount for Seamless Alignment and Clutter-Free Workspaces!

MI-43114 dual monitor wall mount features two swivel arms for smooth full motion monitor adjustments. From monitor tilt to swivel and rotation, this monitor wall mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and maximizing space in the office or at home. This premium dual monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen each of the monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. Each arm features a cable management port to hide and organize cables for a clean look. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Dual LCD wall mount compatible with screens up to 30".Tilt 105 degrees, Rotate and Swivel 360 degrees.44lb total weight capacity. Sleek modern silver finish.Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

MI-45114 dual monitor wall mount features two gas spring arms for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor wall mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and maximizing space in the office or at home. This premium dual monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen each of the monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. Each arm features a cable management port to hide and organize cables for a clean look. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Dual Monitor Wall Mount fits most of 13" -30" Computer Screens.Gas Spring Arms have Tilt, Swivel, Height Adjustable and Rotating Features.Each monitor can tilt up or down 90 degrees and rotate 360 degrees.Load capacity 39.6 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Raise your monitor to an ergonomic position and free up desk space with this single monitor mount. Designed for performance, this mount is made from aluminum and steel for sturdy use. This mount includes both clamp and grommet installation components to fit a variety of desktops. Gas spring allows for smooth and easy height adjustment. Tilt and swivel functionality offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop..Screen Size: 17" - 32".Monitor Weight Capacity: 17.6 lbs..Arm Extension: 19.5" - 21.5".Screen Rotation: +180°,-180°.VESA Compatible: 75x75, 100x100.Tilt: +35°,-35°.Swivel: +90°,-90°.Material: Aluminum, Plastic, Steel.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty