32-Inch Monitor Desk Mounts

MI-2761 premium monitor desk mount merges functionality with aesthetics. By elevating your monitor above your desk, increase desktop space and get ergonomic positioning of your screens for reduced strain and better sitting posture. Fluid and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Single monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitor to switch between landscape and portrait modes..Screen Sizes: 17" - 32".Fully adjustable counterbalance arm with mechanical spring.Weight capacity: 17.6 lbs..Spring Arm Height adjustable up to 11.5 inches.Tilt: 90 degrees up / 90 degrees down.Swivel: 360 degrees at two joints and 180 degrees at one joint.Rotate: 360 degree (between landscape and portrait modes).Integrated cable management system.Desktop thickness: 0.39-3.3 inches.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty

Mount-It! Large Monitor Desk mount was designed for larger monitors and TVs. Its VESA 200x200 and 200x100 bolting patterns makes it compatible with larger and ultrawide monitors in the size range of 34, 35, 37, 38, 40 and 42 inches. This monitor mount can even be used to install a TV to a desktop for improved safety. Most monitor desk mounts on the market only have VESA 100x100 bolting pattern and are too small to connect to the newer and larger monitors on the market. By elevating the monitor from the tabletop, users can achieve a more ergonomic posture that reduces back and neck pain. Raising a larger monitor off of your desktop also creates more space..Screen Sizes: 17" - 42".Fully adjustable counterbalance arm with mechanical spring.Weight capacity: 22 lbs..Integrated cable management system.Tilt: 85 degrees up / 85degrees down.Swivel: 360 degrees at two joints and 180 degrees at one joint.Rotate: 360 degree (between landscape and portrait modes).Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors.Supported by manufacturer's limited lifetime warranty

Raise your monitor to an ergonomic position and free up desk space with this single monitor mount. Designed for performance, this mount is made from aluminum and steel for sturdy use. This mount includes both clamp and grommet installation components to fit a variety of desktops. Gas spring allows for smooth and easy height adjustment. Tilt and swivel functionality offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop..Screen Size: 17" - 32".Monitor Weight Capacity: 17.6 lbs..Arm Extension: 19.5" - 21.5".Screen Rotation: +180°,-180°.VESA Compatible: 75x75, 100x100.Tilt: +35°,-35°.Swivel: +90°,-90°.Material: Aluminum, Plastic, Steel.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty

Full motion range allows you to get your screens to the right height, reducing strain on your eyes and back. This mount works well with a variety of brands, and can handle up to 35 pounds with ease. Just be sure that your monitor is VESA 75x75 and 100x100 compatible, and you will be golden! Keep your desk looking extra tidy thanks to the cable management clips located underneath each arm. Installation is a breeze, and we provide the manual as well as the necessary hardware..Single Monitor Desk Stand fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Height Adjustable Features.Each monitor can swivel 90 degrees and rotates 360 degrees.Cable clip on the pole organizes your cables.Load capacity 17.6 lbs..Supported by manufacturer's limited lifetime warranty

Desk Mount Dual Monitor Arm - Desk Clamp VESA Compatible Monitor Mount for up to 32 inch Displays - Ergonomic Articulating Monitor Arm - Height Adjustable/Tilt/Swivel/Rotating (ARMDUAL3).32 INCH LARGE MONITOR SUPPORT: VESA 75x75mm / 100x100mm compatible multi monitor mount supports 2 large monitors up to 32" (17.6 lb. / 8 kg) per arm w/ horizontal articulation & basic height adjustment.ADJUSTABLE SET UP: Use the desk-clamp (C-clamp) to easily mount and tighten by hand to a desktop (40-85 mm thickness) & cable management clips to hold incl. tools for quick height & angle adjustment.EASY DISPLAY ROTATION: This desk mount dual monitor arm has articulating arms that support toolless monitor rotation from landscape to portrait positioning for viewing longer pages without scrolling.SLEEK DESIGN: Streamlined look w/ small footprint enhances the work area and built-in adjustable cable management clips along the arms and center pole keep cables organized for a presentable workspace.WIDE RANGE OF MOTION: Double monitor mount increases ergonomic comfort and productivity with +30/-30° tilt, +90/-90° swivel, 360° rotating display, and height adjustment along the 15.7" (39.8 cm) pole.Dimensions: 19.6"H x 34.1"W x 4.9"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty.Monitor Mount | Desk C-Clamp | Dual Swivel Arms | Adjustable | For up to 32” Monitors

MI-1771 is one of our premium desk mounts that merges functionality with aestatics. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Single monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitor to switch between landscape and portrait modes. By elevating your monitor above your desk, increase desktop space and get ergonomic positioning of your screens fore reduced strain and better sitting posture. The monitor arm is compatible with VESA patterns (100x100 mm and 75 x 75 mm). If your monitor has mounting holes in the back, this mount will work with it..Single Monitor Desk Mount Stand fits most of 13" -32" Displays.Tilt, Swivel, Full Motion and Rotating Features.Dual base allows c-clamp or grommet connection.Height Adjustable to 13".40 LBs Capacity.Supported by manufacturer's limited lifetime warranty.MI-1771B is one of our premium desk mounts that merges functionality with aestatics

Raise your monitors to an ergonomic position and free up desk space with this stackable dual monitor mount. Designed for performance, this mount is made from aluminum and steel for sturdy use. This mount includes both clamp and grommet installation components to fit a variety of desktops. Gas spring allows for smooth and easy height adjustment. Tilt and swivel functionality offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop. Screen Sizes: 17" - 32", VESA Compatible: 75x75, 100x100, Monitor Weight Capacity: 17.6 lbs. (per screen),Tilt: +35°~-35°, Swivel: +90°~-90°, Screen Rotation: +180°~-180°, Arm Extension: 19.5" - 21", and Material: Aluminum, Plastic, Steel..DUAL MONITOR ARM MOUNT DESK STAND: Fits two monitors up to 32" in size, with a maximum support weight of 17.6 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Comes with interchangeable C-clamp (for desktops up to 3" inches thick) or grommet (up to 1.5" thick) base mounts..WELL-DESIGNED: Vertical monitor mount has counterbalanced, gas spring arms for effortless adjustments, and screens can be stacked in a vertical or horizontal configuration. Comes with integrated cable management and is made out of heavy duty steel and aluminum alloy..FULLY ADJUSTABLE: Vertical dual monitor stand can tilt up and down 35 degrees in either direction, swivel left and right 360 degrees, and raise or lower a total of 14.2 inches. Monitors can be rotated 180 degrees for portrait or landscape orientation independent of each other..EASY INSTALLATION: Double monitor mount comes with all mounting hardware, tools, and instructions necessary for assembly. Turn hex bolt on top of gas springs to set the counterbalance and hold screens in place..Supported by manufacturer's limited lifetime warranty.Boost Ergonomics & Desk Space with Our Dual Monitor Mount. Perfect for Home Offices, Professional Set ups, Commercial Set ups to name a few.

Desk Mount Dual Monitor Arm - Desk Clamp / Grommet VESA Monitor Mount for up to 32 inch Displays - Ergonomic Articulating Monitor Arm - Height Adjustable/Tilt/Swivel/Rotating (ARMDUAL2).32 INCH LARGE MONITOR SUPPORT: VESA 75x75mm / 100x100mm compatible multi monitor mount supports 2 large monitors up to 32" (17.6 lb. / 8 kg) per arm w/ horizontal articulation & basic height adjustment.ADJUSTABLE SET UP: Use the desk-clamp (C-clamp) or grommet to easily mount and tighten by hand. Adjust the height and angle quickly with the included tools attached to the cable management clips.EASY DISPLAY ROTATION: This desk mount dual monitor arm has articulating arms that support toolless monitor rotation from landscape to portrait positioning for viewing longer pages without scrolling.SMALL FOOTPRINT: Space-saving design enhances the work area and built-in adjustable cable management clips along the arms and center pole keep cables organized for a presentable workspace.WIDE RANGE OF MOTION: Double monitor mount increases ergonomic comfort and productivity with +45/-45° tilt, +90/-90° swivel, 360° rotating display, and adjustable height along the 15.7" (39.8 cm) pole.Dimensions: 21.57"H x 35.94"W x 5.83"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty.Monitor Mount | Desk/Grommet | Double Joint | Adjustable | For up to 32" Monitors

Upgrade your workspace with this single monitor arm, designed to provide ergonomic positioning and free up valuable desk space. Unlike bulky built-in stands, this adjustable monitor mount lets you easily set your screen at the ideal height along its 16-inch pole, reducing neck and eye strain for a more comfortable workday. Enjoy full motion flexibility allowing you to find the perfect viewing angle whether you’re working, gaming, or multitasking. The VESA-compatible mount supports monitors up to 32 inches and 19.8 lbs., and its space-saving clamp or grommet base ensures a secure, clutter-free setup. Plus, integrated cable management keeps wires organized for a sleek, professional look..This is an adjustable monitor desk mount designed to support ergonomic screen positioning, and it includes both a C-clamp and grommet mounting base, as well as integrated cable management for a clean and efficient workspace..The mount supports one monitor ranging from 17" to 32" in size. Holds monitors up to 19.8 lbs..The screen can be mounted anywhere along the 16-inch vertical pole to achieve your desired ergonomic height..The item is available in black or white and is made of durable steel..It offers full motion adjustability, including ±160° swivel, +40°/-40° tilt, 360° screen rotation, and flexible pivot positioning to achieve an optimal viewing angle..This mount is VESA-compatible with both 75x75mm and 100x100mm patterns..The mount holds monitors up to 19.8 lbs., making it suitable for most standard and curved screens..Its dual mounting options (clamp or grommet) allow flexible installation on various desk types..Integrated cable management channels keep cords organized and out of sight, supporting a tidy, professional setup..Supported by Limited Lifetime Warranty.From home office to late-night gaming! This monitor arm keeps up with your lifestyle.

Upgrade your workspace with this single monitor arm, designed to provide ergonomic positioning and free up valuable desk space. Unlike bulky built-in stands, this adjustable monitor mount lets you easily set your screen at the ideal height along its 16-inch pole, reducing neck and eye strain for a more comfortable workday. Enjoy full motion flexibility allowing you to find the perfect viewing angle whether you’re working, gaming, or multitasking. The VESA-compatible mount supports monitors up to 32 inches and 19.8 lbs., and its space-saving clamp or grommet base ensures a secure, clutter-free setup. Plus, integrated cable management keeps wires organized for a sleek, professional look..This is an adjustable monitor desk mount designed to support ergonomic screen positioning, and it includes both a C-clamp and grommet mounting base, as well as integrated cable management for a clean and efficient workspace..The mount supports one monitor ranging from 17" to 32" in size. Holds monitors up to 19.8 lbs..The screen can be mounted anywhere along the 16-inch vertical pole to achieve your desired ergonomic height..The item is available in black or white and is made of durable steel..It offers full motion adjustability, including ±160° swivel, +40°/-40° tilt, 360° screen rotation, and flexible pivot positioning to achieve an optimal viewing angle..This mount is VESA-compatible with both 75x75mm and 100x100mm patterns..The mount holds monitors up to 19.8 lbs., making it suitable for most standard and curved screens..Its dual mounting options (clamp or grommet) allow flexible installation on various desk types..Integrated cable management channels keep cords organized and out of sight, supporting a tidy, professional setup..Supported by Limited Lifetime Warranty.From home office to late-night gaming! This monitor arm keeps up with your lifestyle.

Enhance your workspace with our full-motion dual monitor mount, designed to accommodate two monitors up to 32 inches and 17.6 lbs. each. Perfect for professionals and gamers alike, this mount features individual gas springs on each arm for effortless height adjustments, ensuring each screen is always at your ideal ergonomic viewing level. Enjoy the flexibility of full motion control with +90°/-45° tilt, +/-90° swivel, and a full 180° screen rotation, making it easy to share your screen with coworkers or adjust for optimal comfort during long work sessions. The integrated cable management system keeps your desk organized and clutter-free, supporting a more productive environment. Whether in a bustling office, a quiet home study, or a dynamic gaming setup, this mount's sturdy build ensures reliability and durability. Installation is a breeze with both clamp and grommet options included, fitting tabletops up to 1.97 inches thick. Maximize your desk space and your productivity with a setup that adapts to your needs, allowing you to work smarter, not harder..This is an adjustable dual monitor desk mount with built-in gas spring arms, designed for ergonomic positioning and increased productivity.Supports two monitors ranging from 13" to 32" in size, with one gas spring arm for each screen. Holds monitors up to 17.6 lbs. per arm.The height is adjustable from 6.3" to 16.34".The monitor mount is black in color and constructed from high-quality steel.Each arm offers full motion flexibility with a tilt range of +90° to -45°, swivel up to ±90°, and rotation up to ±180°, allowing for dynamic screen positioning and easy screen sharing..Compatible with 75x75mm and 100x100mm VESA mounting patterns..Integrated cable management keeps cords organized and out of sight, maintaining a neat and distraction-free workspace..Ideal for both home and professional use, this sturdy mount increases screen real estate and enhances ergonomic comfort for multitasking..Versatile installation with included clamp and grommet mounting options for a stable fit on any desk.Supported by Limited Lifetime Warranty.Upgrade Your Desk with a Dual Monitor Mount That Does It All!

This Mount-It! wall-mount workstation is designed for commercial and industrial use. It houses one monitor, keyboard, and mouse tray, as well as a desktop computer CPU in a compact and ergonomic package. The gas-spring monitor and keyboard tray arms offer full motion and height adjustment. It is perfect for applications where more than one user needs access to the computer system. The wall-mounted design takes up minimal space and can be adjusted for the needs of multiple users..This wall-mount workstation is designed for commercial and industrial use.Fits up to 32" monitors.Comes in black and made of steel.Tilt angle: +/-35 degrees; swivel: +/-180 degrees.Foldable keyboard tray is 26" wide to accommodate a full-size keyboard and mouse.Dimensions: 37.1"H x 25.7"W x 17.2"-27.5"D.Compatible VESA patterns: 75mm x 75mm and 100mm x 100mm.High-strength steel offers 17.6 lb. capacity for a monitor and 22 lb. capacity for the CPU mount.Height adjustments are a breeze with the gas-spring arms, and the full motion arms allow for precision adjustments for a comfortable position.Perfect addition to any workspace, especially suited for medical and industrial applications.Supported by manufacturer's limited lifetime warranty

Create an efficient workspace with triple the screens, and say goodbye to neck, back, and shoulder pain with this monitor mount. Heavy duty steel and aluminum construction can hold three 32" monitors. Height adjustable, full motion design lets you work in a more comfortable ergonomic position. Quickly tilt, swivel, and rotate your screens as needed while you work. Base includes built-in USB, audio, and microphone ports that can be connected to your CPU. Integrated cable management system keeps cords organized..Triple Monitor Desk Mount fits most of 13"-32" Screens.Tilt, Swivel, and Full Motion Features.Integrated USB 3.0 and audio ports built into the base.Monitor can be installed either in portrait or landscape shape.Load capacity 154 lbs. per monitor, 46 lbs. total.Material: Aluminum, Steel, Plastic.Swivel: +180°,-180°.VESA Compatible: 75x75mm, 100x100mm.10-year manufacturer limited warranty

MI-1772 is one of our premium desk mounts that merges functionality with aestatics. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Dual side-by-side monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitors independently to switch between landscape and portrait modes. By elevating your monitors above your desk, increase desktop space and get ergonomic positioning of your screens fore reduced strain and better sitting posture..Dual Monitor Desk Mount Stand fits most of 13" -32" Displays.Tilt, Swivel, Full Motion and Rotating Features.Dual base allows c-clamp or grommet connection.Height Adjustable to 13".Holds monitors up to 19.8 lbs. per arm.Supported by manufacturer's limited lifetime warranty.Height Adjustable Full-Motion Articulating Desk Mount integrates fashion with function, delivering ergonomic performance with style.

Transform your workspace with our versatile single monitor mount, designed to support a broad range of screen sizes from 13" to 32". Ideal for enhancing your home office setup or professional workstations, this mount adjusts effortlessly to meet your needs. Whether you're gearing up for a marathon coding session, settling in for a long day of digital design, or configuring multiple displays for trading, it provides optimal positioning and comfort. This monitor desk mount comes a robust weight capacity of 17.6 lbs. and is compatible with 75x75 and 100x100 VESA mounting patterns, accommodating most monitor brands. Experience full motion control with tilt angles ranging from +90° to -45°, swivel adjustments of +/-90°, and a complete 180° screen rotation capability that allows you to switch from landscape to portrait orientation in a snap—perfect for any task that requires dynamic screen movement. Securely attaching to most desk types, it fits surfaces from 0.4" to 1.97" thick, ensuring a stable and reliable setup. Crafted from high-quality materials, the monitor mount is not only sturdy but also built to last, regardless of how often you adjust your setup. Additionally, the integrated cable management system keeps your workspace organized and free from clutter, allowing you to maintain a tidy and efficient home office environment. Whether for professional use in offices or for enhancing your home office ergonomics, this monitor mount delivers superior performance and adaptability..This is a Single monitor desk mount with gas spring arm for ergonomic positioning; includes C-clamp and grommet base for flexible installation. Ask ChatGPT.The mount is designed to support a broad range of screen sizes from 13" to 32". Holds monitors up to 17.6 lbs..The height can be adjusted smoothly along the arm from 6.3" to 16.43".The monitor mount is black in color and constructed from high-quality steel for long-lasting performance..Offers full motion articulation with a tilt range of +90° to -45°, swivel adjustments of ±90°, and screen rotation up to 180° for flexible viewing from any angle..Compatible with standard 75x75mm and 100x100mm VESA mounting patterns..An integrated cable management system keeps wires neatly organized and out of sight for a clutter-free workspace..Dual mounting options (clamp and grommet) provide a secure fit for a wide range of desk types..Ideal for both home and office use, this monitor mount offers reliable performance and ergonomic flexibility..Supported by Limited Lifetime Warranty.Smooth, Space-Saving Monitor Arm with Gas Spring Adjustment for Effortless Ergonomic Comfort!

Create an ergonomic work area and save space by mounting your monitor above your desk, and re-position easily. Save valuable desk space and position your monitor in a more comfortable viewing position. Constructed of high-grade steel, this monitor desk mount for up to 32" monitors makes it easy to suspend your display above your desk or other work surface. Work in comfort while saving desk space. Clear up your desk surface while creating an ergonomic workspace. This simple yet rugged monitor mount supports displays 13" to 32" (330 to 813 mm) in size and 17.6 lb. (8 kg) in weight. Easily rotate, tilt and swivel, to adjust your screen position and find the perfect viewing angle. You can also adjust the height of your monitor along the vertical pole to a maximum height of 17.4" (443 mm) to your desired position, to reduce neck and eye strain. Rugged steel construction. The heavy-duty steel mount is built for long-lasting performance. The surface finish features a powder coating to help resist scratches. Easy installation. The monitor desk mount makes it easy to mount a VESA mount compatible display above your desk, table or other surface, using the included C-clamp or grommet mount. A detachable VESA panel enables simple attachment of your monitor, then you just slide your monitor onto the mount. To help keep your work area free of clutter, the monitor mount also features cable clips that keep your cables neatly out of sight. The ARMPIVOTV2 is backed by a StarTech.com 2-year warranty and free lifetime technical support..Monitor desk mount supports displays up to 32" (686 mm) in size and 17.6 lb. (8 kg) in weight.Detachable VESA mount makes it easy to attach your monitor.Heavy-duty steel construction.Made of plastic.-45 to 45-degree tilt, -45 to 45-degree pan, and -45 to 45-degree rotation adjustment options enable optimal viewing.Dimensions: 5.83"H x 4.5"W x 21.57"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.2-year manufacturer limited warranty

Mount-It! MI-7919 monitor and keyboard tray is designed to create a wall-mounted workstation. It is a space saving and economical solution for small spaces. Most wall mounted workstations or rolling standing desks cost 5 to 10 times the price of this wall mount platform.It is very easy to install and use. The vertical tray connects to the wall mount on the back side and to a monitor on the front side. The large keyboard platform sits directly beneath the monitor. All necessary instructions and hardware included..Raise your monitor to a comfortable viewing height with this monitor mount.Supports up to 32" monitors for versatile use.Height adjusts from 14.2" to 19.7" for comfortable viewing.Made of steel.Tilt functions enable adjustments.Monitor mount supports up to 60 lbs. and included mount for computer supports up to 22 lbs..Dimensions: 25.8"W x 12.4"D.Compatible with 75 x 75 and 100 x 100 VESA patterns.Comes in black.Supported by manufacturer's limited lifetime warranty

This Mount-It! dual-monitor wall mount workstation is designed for commercial and industrial use, but can be used almost anywhere. The mount holds two monitors, a keyboard and mouse tray, and a desktop computer CPU, in a compact and ergonomic package. The wall-mounted design saves space and can be adjusted for the needs of multiple users. The included metal PC mount with safety straps mounts the desktop computer next to the workstation for a cleaner and more compact installation, while also protecting the PC from accidental bumps and dust..Dual-monitor wall mount with PC holder and keyboard tray is a perfect addition to any workspace.Fits 17"-32" monitors.Full-motion gas-spring arms provide up to 28" height adjustment for comfortable positioning.Made of a high-strength steel and comes in black.Tilt angle: +/-80 degrees; swivel: +/-180 degrees; rotation: +/-180 degrees.26"W x 9.5"D foldable keyboard tray accommodates a full-size keyboard and mouse, while a wall-mounted holder fits a 4.8"-8.3" PC.Dimensions: 37.1"H x 37"W.Compatible VESA patterns: 75 x 75mm and 100 x 100mm.Suitable for medical and industrial applications.Installing your monitor is quick and easy with a detachable plate.Weight capacity: 17.6 lbs. per arm and 22 lbs. for the PC mount.Safety straps keep your computer securely in place.Supported by manufacturer's limited lifetime warranty

Free up space while creating an ergonomic work environment. This desk-mount monitor arm makes it easy to securely mount your display above your desk or table and adjust the height with one touch. You can mount a display ranging in size from 13" to 32" (330 mm to 813 mm), and the monitor arm features an attractive black finish that complements your workspace. Mount Your Monitor to Save Space : This heavy-duty monitor arm saves space on your work surface by elevating your monitor above your desk or table. One-Touch Height Adjustment : The monitor-mount arm features a gas-spring cylinder that makes it easy to raise or lower your display, with up to 13.1" (335 mm) of height adjustment. Adjust the tension according to the weight of your monitor, to re-position the monitor height effortlessly. Adjust Your Monitor for Ideal Viewing : The full-motion articulating monitor arm extends up to 23.8" (605 mm) so it's easy to find the right viewing angle. Swivel your monitor 180 degrees to share your display, while collaborating with others. Tilt your screen 90 degrees for comfortable viewing or rotate it 180 degrees for landscape or portrait viewing. Easy Installation : The VESA monitor mount is easy to install (desk C-clamp or grommet mount) and offers built-in cable management. The detachable VESA panel makes it simple to attach or remove your monitor. ARMPIVOTHDB is backed by a StarTech 2-year warranty and free lifetime technical support..Single-monitor arm saves space by letting you mount a monitor up to 32" (813 mm) weighing up to 19.8 lb. (9 kg).Durable, heavy-duty aluminum construction with attractive black finish.Easy one-touch height adjustment (up to 13.1" /335 mm) with gas spring arm.Hassle-free installation with detachable VESA panel and integrated cable management.Articulating arm rotates and swivels 180, and provides +90 / -90 tilt

Mount-It! MI-7996 is an affordable, easy way to convert your existing desk into an ergonomic sit-stand workstation. With C-clamp and grommet mounting options, a 25" tray for a keyboard and mouse, adjustable dual monitor mounts, and a gas spring arm system, the MI-7996 lets you go from sitting to standing in seconds. The height and tilt adjustments ensure you will be able to position your keyboard and monitor in exactly the right place for you. The keyboard tray has plenty of space to fit a keyboard and a mouse side by side, and the heavy-duty steel construction will allow you to enjoy this workstation for years to come..Raise your monitor to a comfortable viewing height with this monitor mount.Compatible with two monitors up to 32".Up to 28" height adjustment to sit or stand while you work.Made of steel.35-degree tilt and 360-degree rotation adjustment options enable optimal viewing.25.7"W tray is large enough for a keyboard and mouse side by side.17.6 lb. weight capacity per monitor.Dimensions: 31.8"H x 37"W.Clamp or grommet mounts.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Tilt and swivel to set a position that is comfortable for you.Great for use in any home or office environment.Supported by manufacturer's limited lifetime warranty

Working in an ergonomic environment doesn't need to be costly. The installation of this mount is quick, and you can adjust it in all angles to suit your viewing needs. Simply clamp the mount onto the edge of your desk, and allow the gas spring arm to do the heavy lifting. The full range of motion allows you to move the monitor from a landscape to portrait position if needed. See how this mount can help reduce strain in your eyes and neck today..Raise your monitor to a comfortable viewing height with this monitor mount.Supports screens from 17" to 32" monitors for versatile use.Height adjusts from 7.5" to 17.5" for comfortable viewing.Made of aluminum, steel, and plastic.Tilt and swivel functions enable adjustments for comfortable viewing.Total weight capacity: 35.2 lbs. (17.6 lbs. per monitor).Compatible with: VESA 75 x 75, 100 x 100 (mm) mounting patterns.Comes in black.Supported by manufacturer's limited lifetime warranty.Switch Between Landscape and Portrait Modes Effortlessly, Our MI-2672 dual monitor Mount easily Adjust Your Monitor’s Height, Tilt, and Swivel for Perfect Viewing

MI-2761 premium monitor desk mount merges functionality with aestatics. By elevating your monitor above your desk, increase desktop space and get ergonomic positioning of your screens for reduced strain and better sitting posture..Raise your monitor to a comfortable viewing height with this monitor mount.Supports screens from 17" to 32" monitors for versatile use.Height adjusts from 7.5" to 17.5" for comfortable viewing.Made of aluminum, steel, and plastic.Tilt and swivel functions enable adjustments for comfortable viewing.Monitor weight capacity: 17.6 lbs..Compatible with: VESA 75 x 75, 100 x 100 (mm) mounting patterns.Comes in black.Supported by manufacturer's limited lifetime warranty.Switch Between Landscape and Portrait Modes Effortlessly, Our MI-2671 Monitor Mount easily Adjust Your Monitor’s Height, Tilt, and Swivel for Perfect Viewing

Mount-It! MI-2781 helps raise your monitors to an ergonomic position and work more efficiently with this dual monitor stand. Designed for performance, this monitor stand is made from high-strength steel for durability. Freestanding base sits on top of any desktop for quick installation. The arms can be raised or lowered on the pole for easy height adjustment. Tilt and swivel offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop.All necessary instructions and hardware included.Screen Sizes: 13" - 32"VESA Compatible: 75x75, 100x100Monitor Weight Capacity: 17.6 lbs. (per screen)Tilt: +45°~-45°Swivel: +90°~-90°Screen Rotation: +180°~-180°Pole Height: 18.3"Material: Steel.ERGONOMIC DUAL MONITOR MOUNT: Raise your monitors/screens to the optimal viewing height to reduce neck stain and back stiffness. Cable management clips keep your desk neat organized..STURDY SUPPORT and HIGH QUALITY CONSTRUCTION: Heavy-duty steel monitor mount can support to 32" monitors for versatile use with a weight capacity of 22 lbs. per arm for a total capacity of 44 lbs..FULLY ADJUSTABLE: Monitor arms have arms which tilt +/- 45 degrees, swivel left-right 360 degrees, and can be raised and lowered on the 18.3" center pole, offering a more ergonomic positioning of your computer screens, while saving room on your desktop. Each screen can be placed in portrait or landscape orientation independent of one another..WIDELY COMPATIBLE: Works with screens from 19" to 32" in size and works with the standard 75x75mm or 100x100m VESA square bolt hole patterns.EASY INSTALLATION: 2-monitor stand comes with all mounting hardware, tools, and instructions necessary for assembly. Mounting plates can be removed, attached to monitors and reattached to the stand in just a few minutes. Stable freestanding base supports use on desktop..Supported by manufacturer's lifetime limited warranty.Mount two 13" to 32" LCD displays on your desk with this Mount-It! dual monitor desk stand LCD mount to improve productivity.

Raise your monitors at an ergonomic position and free up valuable desk space with this stacked dual monitor mount. This mount is made from high grade steel built to resist scratches and supports screens up to 17.6 lbs each arm and screen size up to 32". This includes clamp and grommet to fit a variety of desktops. Adjustable height, tilt, swivel and rotation functionalities offer optimal viewing angles. Comes with cable management clips to keep your wires organized..Raise your monitor to a comfortable viewing height with this monitor mount.Supports two up to 32" monitors for versatile use.Adjustable height: 16.5"H for each monitor.Made of heavy-duty, cold-rolled steel.-45-45-degree tilt and -180-180-degree rotation adjustment options enable optimal viewing.-180-180-degree rotation allows monitors to be oriented vertically or horizontally.Support up to 17.6 lbs. on each arm: 35.2 lbs. total.Compatible with: VESA 75mm x 75mm and 100mm x 100mm mounting patterns.Clamp or grommet fixation.Cable management.Detachable monitor mounting plate.Comes in black.Supported by manufacturer's limited lifetime warranty

Mount your screen up to 32" in size in either portrait or landscape orientation. The intuitive 25.7" x 9.5" keyboard tray underneath comes with a padded wrist rest to relieve additional stress on your wrists. Cable management system hides unwanted cables and wires from sight. The pneumatic counterbalance gas springs allow your monitor to tilt 35 degrees, swivel 180 degrees, and rotate 360 degrees so you can find the optimum viewing angles. Clamp or grommet onto your work desk..Raise your monitor to a comfortable viewing height with this monitor mount.Compatible with screens up to 32".Height adjustability allows you to sit or stand while working.Made of steel.35-degree tilt and 360-degree rotation adjustment options enable optimal viewing.25.7" wide tray is large enough for a keyboard and mouse side by side.17.6 lb. weight capacity.Dimensions: 31.8"H x 25.7"W.Clamp or grommet mounts.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Articulating arm allows you to rotate the screen to your perfect viewing location.Great for use in any home or office environment.Supported by manufacturer's limited lifetime warranty

Say good bye to neck and should pain and increase your productivity with three screens. Not all triple monitor stands are the same. Our monitor stand has individual height adjustment for each monitor to perfectly align monitor location. This solves the typical problem of monitors not being at the same height, especially for monitors from different brands or different sizes. Heavy duty stand and pole design makes this three monitor mount sturdy. Economical and dependable, mechanical monitor arms allow several height options for placing your monitor in the best ergonomic position, while offering more desktop space. The double link swing arms that support the monitors can be adjusted on the vertical tube for the best height adjustment. The arms that support the monitors can be adjusted on the vertical tube for the best height adjustment. Articulating arms on the sides allow swivel function up to 360 degrees with 45 down and 80 up degrees of tilt at the mounting panel. The arms and the base come with integrated cable management feature. Cable management system keeps cords organized. All necessary instructions and hardware included..Raise your monitors to a comfortable viewing height with this quad monitor desk stand.Supports up to 32" monitors for versatile use.Made of steel.-45- to 45-degree tilt and -180- to 180-degree rotation adjustment options enable optimal viewing.-180- to 180-degree rotation allows monitors to be oriented vertically or horizontally.Total weight capacity: 70.4 lbs. (17.6 lbs. per monitor).Compatible with: VESA 75 x 75, 100 x 100 (mm) mounting patterns.Comes in black.Supported by manufacturer's limited lifetime warranty.Mount-It! MI-2784 quad arm (horizontal) monitor mount and stand allows you to clear out your desk space, while providing ergonomic monitor installation height.

Raise your monitors at an ergonomic position and free up valuable desk space with this stacked dual monitor stand. Designed for performance, this desk stand is made from high grade steel built to resistscratches and supports screens up to 17.6 lbs each arm and screen size up to 32". Adjustable height, tilt, swivel and rotation functionalities offer optimal viewing angles. Comes with cable management clips to keep your wires organized..Raise your monitor to a comfortable viewing height with this monitor stand.Supports 17" - 32" monitors for versatile use.15.5" height adjustment per mount.-45 to 45-degree tilt and -180 to 180-degree rotation adjustment options enable optimal viewing.Can hold up to 17.6 lbs. per monitor.Dimensions: 35"H x 15"W x 12"D.Compatible with 75mm x 75mm and 100mm x 100mm VESA patterns.Integrated cable management and the detachable VESA plate make installation clean and easy.Comes in black.Supported by manufacturer's limited lifetime warranty

MI-1771 is one of our premium desk mounts that merges functionality with aestatics. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Single monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitor to switch between landscape and portrait modes. By elevating your monitor above your desk, increase desktop space and get ergonomic positioning of your screens fore reduced strain and better sitting posture. The monitor arm is compatible with VESA patterns (100x100 mm and 75 x 75 mm). If your monitor has mounting holes in the back, this mount will work with it..Single Monitor Desk Mount Stand fits most of 13" -32" Displays.Tilt, Swivel, Full Motion and Rotating Features.Dual base allows c-clamp or grommet connection.Height Adjustable to 13".40 lbs. Capacity.10-year manufacturer limited warranty

MI-35114 single monitor wall mount features an articulating gas spring arm for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor wall mount is designed to save space while improving posture by raising the monitor to eye level in any type of environment. This premium monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen the monitor-mounting arm, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. The arm features a cable management port to hide and organize cables for a clean look. Fits monitors measuring in size up to 32” and can hold up to 19.8lbs..Single Monitor Wall Mountcompatible with screens up to 32".Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 20 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Raise your monitors to an ergonomic position and work more efficiently with this quad monitor mount. Designed for performance, this quad mount is made from high-strength steel for durability. Includes both clamp and grommet installation components to fit a variety of desktops. Each pair of arms can be raised and lowered on the pole for easy height adjustment. Tilt and swivel offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop. All necessary instructions and hardware included..Raise your monitors to a comfortable viewing height with this quad monitor mount.Supports up to 32" monitors for versatile use.Made of steel.-45- to 45-degree tilt and -180- to 180-degree rotation adjustment options enable optimal viewing.-180- to 180-degree rotation allows monitors to be oriented vertically or horizontally.Total weight capacity: 70.4 lbs. (17.6 lbs. per monitor).Compatible with: VESA 75 x 75, 100 x 100 (mm) mounting patterns.Comes in black.Supported by manufacturer's limited lifetime warranty

Whether you are working from home or in an office, this dual monitor stand with spring assisted height adjustment allows you to set your monitor height to your personal ergonomic viewing position. It comes with a stable, freestanding base which means you can easily place it anywhere without having to worry about clamp or grommet mounting. The monitor stand fits two screens between 17" and 32" in size with a weight between 4.4 and 17.6 lbs each and comes with a quick release VESA plate (75x75 & 100x100) for easy installation. An integrated handle allows for quick and easy height adjustment and the sliding horizontal bar enables you to seamlessly align your screens. If you ever want to turn your screens to share them or reduce glare, the integrated swivel feature allows for up to 25° rotation left and right. The screens themselves can be rotated 180° left and right so that you can view them in horizontal as well as vertical orientation. Keep your cords organized and your workplace neat with the integrated cable management..This freestanding dual monitor arm with stable base allows you to adjust height and alignment of your screens for an ergonomic viewing experience.It is compatible with monitors from 17" to 32" and up to 17.6 lbs each.Height-adjustable via spring-assisted mechanism, Min of 12.40" to 18.30".The monitor arm is finished in black and constructed from durable steel for stability..The monitors can swivel up to 25° left and right, rotate fully 360° for horizontal or vertical viewing orientation, and feature horizontal rotation up to 180° left or right, Tilt: +/-10°, Swivel: +/-25°.Each monitor arm supports screens weighing up to 17.6 pounds..Compatible with standard VESA mount patterns measuring 75x75mm and 100x100mm..Perfect for office and home use.An integrated cable management system keeps your cords organized and the quick release VESA plate ensures easy monitor installation.Supported by Limited Lifetime Warranty.Make Your Workday Easier with an Adjustable Dual Monitor Arm!

The MI-2752L allows you to raise your monitors at an ergonomic position and free up valuable desk space with this dual monitor mount. Designed for performance, this desk mount is made from high grade steel built to stand the test of time and supports screens up to 22 lbs. each arm and screen size up to 32". Adjustable height, tilt, swivel and rotation functionalities offer optimal viewing angles. Comes with cable management clips to keep your wires organized..Fits two displays from sizes 17 to 32 inches in size, with a maximum support weight of 22 pounds on each arm, using the 75x75mm or 100x100mm VESA square bolt holes pattern found on the back of the monitor. (measure distance, in millimeters, between bolt hole patterns if unsure of size).Constructed of heavy duty steel, integrated cable management clips keep your cables organized, comes with interchangeable C-clamp or grommet bases, and mounting plates are detachable for easy monitor mounting..Comes with all mounting hardware, tools, and instructions necessary for assembly. Mounting plates can be removed, attached to your monitors, then re-attached to the stand in a few minutes for easy installation..Monitors can tilt up 90 degrees and down 90 degrees, swivel left and right 180 degrees at two different joints, and each screen can be rotated 360 degrees and held in portrait or landscape orientation independent of one another. Arm raises and lowers a total of 17 inches on the center pole..Supported by manufacturer's limited lifetime warranty.The MI-2752L full motion monitor arm mount helps you increase productivity and clear up extra space on your desk

This Monitor Arm Mount's full motion arms swivel, tilt, rotate and move up and down to position the monitors just right for you. The gas spring mechanism includes an adjustable counterbalance so that you can make fluid and easy height adjustments to your screen and position your displays in the optimum viewing position. Rotate your screens between portrait and landscape mode to suit your workflow needs. Cable management sleeves offer a clean, clutter-free look so you can utilize your desk space more efficiently. The dual base allows supports clamp or grommet installations..DUAL ARM MONITOR MOUNT: Fits 2 screens from 19-32 inches in size, with a maximum support weight of 20 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Comes with interchangeable C-clamp or grommet base mount for use on desktops.WELL-DESIGNED FEATURES: Two monitor stand has counterbalanced, gas spring arms which make adjustments effortless. It has 2 quick-detachable VESA plates for easy mounting and removal of monitors. Comes with integrated cable management and is made out of heavy duty steel and aluminum alloy..FULLY ADJUSTABLE: Dual monitor arms can tilt up and down 90 degrees, swivel left/right 180 degrees at two joins and a full 360 at another, and raise/lower a total of 13 inches. Both monitors can be rotated into portrait or landscape orientations with easy and will stay in place..EASY INSTALLATION: Dual monitor mount comes with all mounting hardware, tools, and instructions necessary for assembly. Turn hex bolt on top of gas spring arms to set the counterbalance and hold screens in place..Contemporary contours with a color scheme that will never go out of style.Supported by manufacturer's limited lifetime warranty.This monitor arm mount helps you increase productivity and clear up extra space on your desk.

A rolling mobile PC workstation with monitor mount designed for versatility and productivity. Roll this unit from room to room with ease, then lock it in place using the locking casters. Great for home, office, trade shows, and more. The height of both the keyboard tray and the monitor mount easily adjusts, allowing you to create the perfect setup tailored to your height..Raise your monitor to a comfortable viewing height with this monitor cart.Supports up to 32" monitors for versatile use.Height adjusts from 42.5" to 63.5" for comfortable viewing.Tilt and swivel functions enable adjustments for comfortable viewing; keyboard tray and monitor mount independently adjust up and down.Max monitor weight capacity: 17.6 lbs..Compatible with: VESA 75 x 75, 100 x 100 (mm) mounting patterns.Built-in CPU holder, keyboard tray, padded wrist rest, and mouse pad.Comes in black.Supported by manufacturer's limited lifetime warranty

Whether you are working from home or in an office, this monitor stand with spring assisted arm allows you to adjust your monitor height to your personal ergonomic viewing position. It comes with a stable, freestanding base which means you can easily place it anywhere without having to worry about clamp or grommet mounting. The monitor stand fits screens between 17" and 32" in size with a weight between 4.4 and 17.6 lbs. and comes with a quick release VESA plate (75x75 & 100x100) for easy installation. If you ever want to turn your screen to share it or reduce glare, the integrated swivel feature allows for up to 25° turning left and right. The screen itself can be rotated 180° left and right so that you can view it in horizontal as well as vertical orientation. Keep your cords organized and your workplace neat with the integrated cable management..This freestanding monitor arm with stable base allows you to adjust the height of your screen and achieve an ergonomic viewing experience.The stand supports a single monitor between 17" to 32" in size, including curved screens..The monitor height can be adjusted up to a maximum of 20.6 inches..This monitor arm is black in color and made from steel for durability..The mount allows for ±25° swivel, +10°/-15° tilt, ±180° screen rotation and pivot, and provides a wide viewing angle of up to 180°..The assembled dimensions are 20.6 inches in height, 10.6 inches in width, and 7.9 inches in depth..It is compatible with VESA mounting patterns of 75x75mm and 100x100mm..An integrated cable management system keeps your cords organized and the quick release VESA plate ensures easy monitor installation.Perfect for office and home use.Supported by Limited Lifetime Warranty.Work Comfortably with Effortless Monitor Height Adjustments, Quick and Simple Monitor Positioning, No Clamp Needed

Create your perfect immersive gaming station or a professional multiscreen desk setup with this Mount-It! desk mount for monitors with screen size up to 35" and weight up to 44 lbs. The mount's optimized heavy-duty tilting and gas spring mechanisms allow for smooth and stable adjustment of large screens. The full-motion design enables you to lower and raise, swivel, tilt, and rotate your screens to achieve the perfect viewing height and angle. To fully immerse in your game, this mount features RGB lighting along the arms and on the base: simply switch between 20 different modes by pressing the easily accessible RGB mode button on the base. Both, a clamp and grommet mount are included for easy installation on your desk. The detachable VESA plate with 75 x 75 and 100 x 100 hole patterns allows for quick installation of your monitors, and the integrated cable management ensures neat and organized cable routing along the arms..Create your perfect immersive gaming station with this heavy-duty dual monitor arm.Fits two large screens, each up to 35" and 44 lbs..Arms are height-adjustable from 8.54" to 19.68".Made of aluminum and steel in a combination of grayish white and matte black finishes.Full-motion design with a 360-degree screen rotation, 180-degree swivel, and tilt up to +50/-20 degrees ensures you get the optimal viewing angle.Base dimensions: 7"W x 4.5"D (total wingspan: up to 36").Compatible with 75 x 75 and 100 x 100 VESA patterns.Powerful gas spring arms offer a smooth and stable adjustment with a maximum extension of 18".Integrated USB-powered RGB lighting with 20 different effects enhances any gaming station.Built-in cable management allows you to route the cable underneath the arms for a clean and organized workspace.Extra-sturdy clamp and grommet mounting options included (recommended tabletop thickness: 0.39"-3.34" for clamp and 0.39"-1.88" for grommet).1-year manufacturer limited warranty

The MI-753XL triple monitor desk mount provides you with an ergonomic work station, where you can find any number of positions for your monitors. Tilt and orient your screen to help reduce glare and eye strain. Rotate easily between landscape and portrait orientation to suit your fluctuating work needs. The height-adjustable design allows you to turn your workspace into a sit-stand desk. The dual locking C-clamp ensures stability, reinforcing the bond between your mount and desk, and fits desks up to 4" thick. All necessary hardware and instruction guides are included..Raise your monitor to a comfortable viewing height with this triple-monitor desk mount.Supports most flat panel monitors from 13" up to 32" for versatile use.Made of heavy-duty steel and comes in black.90-degree tilt feature allows you to reduce glare and eyestrain.Weight capacity: 22 lbs. per arm.Compatible with VESA 100 x 100mm mounting patterns.Height-adjustable design allows you to turn your workspace into a sit-stand desk.360-degree independent plate rotation allows for easy setup for portrait and landscape orientation.Supported by manufacturer's limited lifetime warranty.Achieve a Customizable, Ergonomic Workstation with our Triple Monitor Mount

This Mount-It! sit-stand workstation will transform the way you work. This desk converter sits on top of your existing desk and allows you to work comfortably from either a sitting or standing position. The spring-assisted lift mechanism on this workstation allows you to raise and lower the unit in a matter of seconds. Enjoy a compact and easy-to-use sit-stand desk while you improve your health and posture. The full-motion triple-monitor mount allows you to raise the height of your monitor while freeing up more desk space. The height of the monitor can be adjusted to suit your height. Having three monitors will increase productivity and cut down on time going back and forth between documents. Installation is meant to be simple so that you don't waste valuable time. The large freestanding base requires no modification to your existing desk and provides stable support..Raise your monitor to a comfortable viewing height with this triple-monitor desk mount.Supports most flat panel monitors up to 32" for versatile use.Height adjusts from 26.5" to 47.2" for comfortable viewing.Construction uses materials, such as steel, MDF and PVC, aluminum, plastic.Each plate tilts, up to 45-degree tilt and 180-degree rotation adjustment options enable optimal viewing.Generous 28.3" x 18.9" shelf offers ample room for a laptop or full-sized keyboard and mouse.Weight capacity: 55 lbs..Dimensions: 26.5"-47.2"H x 64.3"W x 18.9"D.Compatible with VESA 75mm x 75mm, 100mm x 100mm mounting patterns.Requires assembly upon delivery.Integrated cable management system keeps the workstation clean and free of cables and wiring.One-button adjustments with the heavy-duty, quiet motor get you from sitting to standing in seconds.Supported by manufacturer's limited lifetime warranty

The MI-2751 transforms your desk into a more comfortable and ergonomic environment with the help of this monitor mount. Not only will you raise your screen to comfortable viewing levels, you will also free up a lot of desk space that you can use for other supplies and accessories such as laptops or notepads. Raising the monitor higher with this monitor mount improves your posture and provides ergonomic and healthy set up. Raising the monitor also saves valuable desktop space. The arm and pole has cable management clips to keep the power and HDMI cables tidy..MI-2751 is compatible with 75mm x 75mm, 100mm x 100mm VESA patterns and can hold up to 22lbs.Adjustable arm swivels 180 degrees, 360 rotation between landscape and portrait. Tilts 90 degrees.Heavy-duty clamp or grommet base easily attaches to your desk or tabletop.The arm and pole has cable management clips to keep power and HDMI cables tidy.The arm is height adjustable on the pole, up to 18".Supported by manufacturer's limited lifetime warranty.The MI-2751 monitor arm mount holds a monitor up to 32”/22 lbs.

Enhance your workstation with the MI-2762 dual monitor mount. Effortlessly tilt, swivel, and rotate your screens while maintaining a clutter-free desk with built-in USB 3.0 ports and easy installation..Fits monitors from 19" to 32".2 x USB 3.0 ports for easy connection of your devices.11.5 Inches of Height Adjustment.VESA 75x75 and 100x100 compatible..Weight capacity: 4.4 to 17.6 lbs. for each arm.Tilt: 90 degrees up / 90 degrees down.Swivel: 360 degrees at two joints and 180 degrees at one joint.Rotate: 360 degree (between landscape and portrait modes).C-Clamp and Grommet base options included.Easy to install. All hardware for installation and instructions provided.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty.Ergonomic Dual Monitor Mount with Height Adjustment & USB 3.0 Ports. Ideal for offices, reception areas, hospitals, retail environments and modern homes.

Lights, camera, action. No need for the DIY setups you've used in the past. The Mount-It! All-in-One studio dual mount is a fully-loaded streaming set that can hold two monitors, video camera, ring light and has an extendable mic arm, making you look and sound like the professional you are. Each arm has a full range of motion so that you can raise, lower, tilt, and swivel it into the perfect position. The stainless steel construction and reinforced steel base protect your investment, keeping your devices secure at all times..Studio dual mount is a fully loaded streaming set that can hold two monitors, one video camera, one ring light and has an extendable mic arm.Offers a dual-monitor mount, fits 17"-32" monitors.Each arm has a full range of motion so that you can raise, lower, tilt, and swivel it into the perfect position.Made of sturdy, durable steel in black.Monitor tilt angle: +/-70 degrees; camera tilt angle: +/-90 degrees.Compatible VESA patterns: 75 x 75mm and 100 x 100mm.Each connecting bracket has an ergonomic handle, so you can easily position your devices how you like, even while you're streaming.Supported weight: two monitors up to 19.8 lbs. each; camera up to 15.4 lbs.; microphone up to 2.2 lbs.; light up to 15.4 lbs..Full arm extension: 15.7".Stainless steel construction and reinforced steel base protect your investment, keeping your devices secure at all times.Supported by manufacturer's limited lifetime warranty

Lights, camera, action. No need for the DIY setups you've used in the past. The Mount-It! All-in-One studio single mount is a fully-loaded streaming set that can hold one monitor, video camera, ring light and has an extendable mic arm, making you look and sound like the professional you are. Each arm has a full range of motion so that you can raise, lower, tilt, and swivel it into the perfect position. The stainless steel construction and reinforced steel base protect your investment, keeping your devices secure at all times..Studio single mount is a fully loaded streaming set that can hold one monitor, video camera, ring light and has an extendable mic arm.Offers a single-monitor mount, fits 17"-32" monitors.Each arm has a full range of motion so that you can raise, lower, tilt, and swivel it into the perfect position.Made of sturdy, durable steel in black.Monitor tilt angle: +/-70 degrees; camera tilt angle: +/-90 degrees.Compatible VESA patterns: 75 x 75mm and 100 x 100mm.Each connecting bracket has an ergonomic handle, so you can easily position your devices how you like, even while you're streaming.Supported weight: monitor up to 19.8 lbs.; camera up to 15.4 lbs.; microphone up to 2.2 lbs.; light up to 15.4 lbs..Full arm extension: 15.7".Stainless steel construction and reinforced steel base protect your investment, keeping your devices secure at all times.Supported by manufacturer's limited lifetime warranty