1U Rack Units

These shielded CAT6 patch panel features 48 CAT6 RJ45 to RJ45 feed-through ports. Thus patching becomes quick and easy without punching down the wires to the ports. A cable management bar helps support cables attached to the rear of the panel. Save space in crowded data cabinets. Use this sturdy patch panel for high-density applications in all 19" relay racks or communications cabinets..Get up to 48 ports in only 1U of space with this shielded patch panel.Compatible with network rack (minimum 1U space).Comes in black.Patching without punching down the wires to the ports.For high-density applications in relay racks or communications cabinets.Meets Category 6 performance requirements.Package content: CAT6 high-density feed-through patch panel, 4 x 10-32 cuphead screws, 4 x 12-24 cuphead screws, 8 x cable ties, 8 x station ID labels.25-year manufacturer limited warranty

Smooth plastic fingers of this APC® 1U horizontal cable manager offer proper bend radius to ensure cable protection. The included double-sided cable manager configuration hardware lets you connect two alike horizontal cable managers back-to-back for double-sided applications. High capacity slim cable fingers offer maximum capacity at every rack space unit while rigid design minimizes the deflection after routing the cables in/out of the cable manager channel. Covers with snap hinges of this 19" single-sided cable manager provide easy access to the cables. It comes with installation guide and mounting hardware..Dimensions: 4.3"(H) x 1.7"(W) x 18.3"(D).Black.Rack size: 19".Rack height: 1U, 4" deep.Features cable tie-off and cable access slots in the backplate for front to back cable pass-through.Cable access slots in the backplane provide improved accessibility from the front to the rear of the enclosure for cable routing.Smooth plastic fingers provide proper bend radius.Covers with snap hinges provide trouble-free access to cables.Feature high capacity slim cable fingers to provide maximum capacity at every rackspace unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.Includes: Double-sided configuration hardware to install alike horizontal cable managers back to back for double-sided applications.Compliant standards: RoHS.Weight: 1.02 kg.Warranty: 2 years repair or replace.Horizontal cable manager organizes patch cords and cables in a rack and cabinet while allows for reconfiguring and maintenance.Made of durable black plastic.Length: 19".Compatible with APC NetShelter SX enclosure with sides.Includes two double-sided configuration hardware to install alike horizontal cable managers back-to-back for double-sided applications.Slim cable fingers provide maximum capacity at every rack space unit and a rigid design to decrease deflection when cables are routed.The APC® 1U horizontal cable manager is perfect to keep the data cable layout organized within an enclosure or a rack. It covers with snap hinges to offer easy access to cables.

This 10-outlet (125V 16A) rack PDU delivers a power distribution solution for your server rack/cabinet. The business-grade 1U power distribution unit can be mounted horizontally in any 19" server rack 4" in depth or greater, to provide ten 125V (16A) power outlets. You can access ten plugs on the front of the horizontal-mount network rack PDU. This power distribution system consolidates your power source and enables you to control all powered devices from one switch. The front of the rackmount power strip features two LEDs that indicate proper ground and surge detection while enabling you to control the power state with an illuminated power/reset switch. This PDU includes an 8 ft. long power cord. To prevent costly breakdowns of connected devices, the rackmount PDU features a built-in 20 Amp (20A) circuit breaker and reset switch, ensuring the dependable performance of vital equipment..10-outlet rackmount power strip delivers a power distribution solution for your server rack/cabinet.Features 10 x 5-15/20R outlets.Equipped with a 8' long power cord.Features two LEDs that indicate proper ground and surge detection, while enabling you to control the power state with an illuminated power/reset switch.125V input voltage.Dimensions: 1.97"H x 17.5"W x 5.1"D.Made of durable plastic and steel, comes in black.Circuit breaker provides optimum power control and overload protection.Meets or exceeds ANSI/EIA RS-310-D, RoHS, and UL standards.Can be mounted horizontally in any 19" server rack 4" in depth or greater, to provide ten 125V (16A) power outlets.Fits many network/data racks, including StarTech's wide range of 2-post and 4-post racks.2-year manufacturer limited warranty

Detachable mounting flanges are configurable for rackmount, wall mount and under-counter installation..6 Outlets.15' black cord.Applications: Offers multiple outlet power distribution for multiple loads in 19" rackmount, wall mount and under-counter applications.Black.Input voltage: 120 VAC.Output voltage: 120 VAC.Input current: 15 A.Plug/connector type: NEMA 5-15P.Form factor: Rack-mountable.Frequency: 50/60 Hz.Circuit breaker: 15 A.Versatile all-metal cabinet with detachable mounting flanges allows rackmount, wall mount, undercounter and other creative mounting creative mounting options.Uses one rack space (1U) in standard 19" rack ("zero U" mounting possible in many racks).Unfiltered electrical pass-through reliably distributes alternate waveform AC power from UPS or generator to supported equipment.Lighted power switch confirms power on/off status, Latching switch guard prevents accidental turn off.Certifications and standards: UL1363, cUL, NOM.Includes: RS-0615-R 6-outlets power strip, warranty information, instruction manual.Dimensions: 1.75"(H) x 17.5"(W) x 4.5"(D).Warranty: Lifetime limited.Tripp Lite Power Strip - Distributes Unfiltered Electricity

Power strip offers 15A capacity AC power distribution in a versatile multi-mount cabinet..12 Outlets.15' black cord.Applications: Offers multiple outlet power distribution for multiple loads in 19" rackmount, wall mount and under-counter applications.Black.Input voltage: 120 VAC.Output voltage: 120 VAC.Input current: 15 A.Plug/connector type: NEMA 5-15P.Form factor: Rack-mountable.Frequency: 50/60 Hz.Circuit breaker: 15 A.Versatile all-metal cabinet with detachable mounting flanges allows rackmount, wall mount, undercounter and other creative mounting creative mounting options.Uses one rack space (1U) in standard 19 " rack ("zero U" mounting possible in many racks).Unfiltered electrical pass-through reliably distributes alternate waveform AC power from UPS or generator to supported equipment.Lighted power switch confirms power on/off status, Latching switch guard prevents accidental turn off.Certifications and standards: UL1363, cUL.Includes: Power strip 120V AC, mounting hardware, instruction manual.Dimensions: 1.75"(H) x 17.5"(W) x 4.5"(D).Warranty: Lifetime limited.Tripp Lite Power Strip - More Outlets, Safer Power

D-Link® 10-port Managed gigabit ethernet switch features 10 gigabit Ethernet technology and 10/100/1000base-T network technology respectively. Switch has 8000 MAC addresses database..PoE switch.Dimensions: 1.73"H x 11.02"W x 7.08"D.Compatible with PC.Comes in black/silver color.Interfaces: 8 x 10/100/1000BASE-T PoE, 2 x SFP.Media type supported: Twisted pair, optical fiber, twisted pair cable standard: Category 5e, Ethernet technology: Gigabit Ethernet.Layer supported: 3, PoE standard: IEEE 802.3af & IEEE 802.3at, PoE capable ports: Ports 1 to 8: Up to 30W.Form factor: Rack mountable, desktop, network cables: UTP Cat.5, Cat.5e (100m max), EIA/TIA-568 100-ohm STP, transmission method: Store-and-forward.Manageable, management: VLAN, QoS, MIB, Syslog, diagnostic LEDs: Power (per device), PoE Max (per device), link/activity/speed.Switching capacity: 40 Gbps, MAC address table: 16, 000 entries per device, packet forwarding rate: 14.88 Mpps, packet buffer memory: 1.5MB.IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX (Fast Ethernet), IEEE 802.3ab 1000BASE-T (Gigabit Ethernet), auto-negotiation.Security: Broadcast multicast/unicast storm control, D-Link safeguard engine, DHCP server screening.IP-MAC-Port binding (smart binding) - Supports 512 address binding entries, ARP inspection, ARP + IP inspection, supports DHCP Snooping.Power source: Power supply, input voltage: 120 - 230 VAC, PoE power budget: Max. 78 W.Operating temperature: 23 - 122 deg F, storage temperature: -4 to 158 deg F, humidity: 0 - 95 % non-condensing (operating/storage).Meets FCC Class A, CE Class A, ICES-003, VCCI Class A, C-Tick, BSMI, Safety, cUL, CE LVD, ENERGY STAR, WEEE standards.Weight: 3.1 lbs..D-Link® 10-port Managed gigabit ethernet switch is compatible with 1U rack unit and requires input voltage of 110/220 VAC.