4U Server Racks

The Tripp Lite SR24UBFFD SmartRack 24U standard-depth rack enclosure cabinet is perfect for factories, power stations, water treatment plants, construction areas, shipping facilities, warehouses, transport hubs and other working environments high in moisture, dust and debris. Cabinet measuring 46.8" x 23.6" x 38.5", has durable steel construction for longer endurance. It has eight high-performance fans built into front door for ensuring maximum airflow through enclosure. Cabinet with 1000 lbs weight capacity, accommodates standard 19" rack equipment in 24U of space. It has louvered front door for blocking drips, splashes and falling debris from entering enclosure, while the built-in dust filters keep out airborne contaminants away..Rack enclosure cabinet featuring high-quality constructions, withstands harsh environments.Dimensions: 46.8" x 23.6" x 38.5", Cord length: 6'.Color: Black, Material: Steel.Maximum weight capacity: 1000 lbs..Static/stationary weight capacity: 1000 lbs..Rack height: 24U.Grounding lug: Front and back door frames.Input voltage: 120 V, 50/60 Hz, Input plug type: NEMA 5-15P.Perfect for factories, power stations, water treatment plants, construction areas, shipping facilities, warehouses and transport hubs.The 8 high-performance fans built into front door pull air through enclosure/cool equipment while built-in dust filters keep out airborne contaminants.Filters can be removed as well replaced with standard 20" x 24" x 1" furnace filters and fans powered by detachable 10' AC cord with NEMA 5-15P plug.Reversible doors and removable side panels lock tight while convenient ports with removable covers allow cable routing through top and bottom.Front as well rear mounting rails accommodate equipment from 3" - 32.5" deep while rails support square-hole mounting.Removable casters and levelers help with minor position adjustments as well stabilization and comes with mounting hardware.Meets EIA-310-E, IEC 60297-3-100, IP54, RoHS certifications and standards.Contains SR24UBFFD SmartRack 24U standard-depth rack enclosure cabinet, 50 x M6 cage nuts, 50 x M6 screws, 50 x cup washers, four casters.Weight: 209.43 lbs..Comes with 2 years limited warranty

4U 19" Desktop Open Frame Rack - 2 Post Free-Standing Network Rack Switch Depth for Patch Panel/Data/AV/IT/Communication/Studio/Computer Equipment 66lb Capacity w/Cage Nuts/Screws (RK4OD).2-POST 4U DESKTOP OPEN FRAME RACK: Ideal for use on a workbench or in the back room of small office spaces without dedicated wiring closets; offers easy access to IT equipment like switches or routers.DESIGNED FOR EASY ACCESS: Small size & 4U height of the free standing network rack is ideal for testing environments where easy front & rear access to equipment & frequent device changes are required.EASY TO SHIP & SET UP: Quick and easy assembly combined w/5.4lb (2.5 kg) shipping weight makes the AV/studio switch depth rack ideal for remote sites; ships w/cage nuts & screws for mounting equipment.LIFETIME WARRANTY: StarTech.com offers 24 hour technical support and has been the choice of IT professionals for 30 years, conducting thorough compatibility and performance testing on all our products.TECH SPECS: 4U Open Frame Rack| 19" Wide | 2 Post | EIA/ECA-310-E Compliant | U Heights Marked | 66.3lb (30 kg) Capacity | M5 Cage nuts & screws incl. | TAA Compliant.Free Standing Network Rack | EIA-310 | Weight Cap. 66 lbs. | Lifetime Warranty

The Tripp Lite SmartRack® SRWF4U 4U low-profile vertical-mount rack cabinet is designed to house shallow equipment up to 20" deep in network closets, retail locations and classrooms. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 150 lb. The front door features a shatter-resistant clear acrylic window that lets you monitor equipment readouts without unlocking the enclosure. The vented top, bottom and removable side panels allow air to flow freely through the cabinet to keep the equipment cool..Low profile secure rack cabinet is suitable for network wiring closets, retail locations, classrooms and back offices with limited floor space.Dimensions: 73.15 cm H x 65.02 cm W x 20.32 cm D, 19"W (rack), Device depth: 43.18 - 50.80 cm.Black steel.Form factor: Wall mountable.Maximum weight capacity: 150 lbs., static/stationary weight capacity: 150 lbs..Rack height (U spaces): 4.Houses EIA-standard 19" rack equipment in 4U of space, vertical-mount cabinet extends only 8" from the wall while housing equipment up to 20" deep.Includes a slide-out 2U mounting bracket for patch panels up to 2 1/2" deep, top panel and reversible front door lock securely to prevent damage/theft.Front door latch accommodates a user-supplied padlock for added security, vented cabinet keeps equipment cool, convenient ports with removable covers.Wall mounting holes spaced 16" apart for standard wall stud placement, rails adjust easily, threaded mounting holes support M6 or 12-24 mounting.Rack spaces marked for easy reference, provides physical equipment and media security required for PCI DSS compliance.Includes rack cabinet, 12 x M6 screws, 12 x M6 cup washers, 12 x 12-24 screws, 2 x keys, owner's manual.Meets Green compliant, RoHS, EIA-310-E standards.Weight: 27.3 Kg.Comes with 5 year limited warranty

The StarTech® WALLSHELF4U wall-mount server rack in black, comes with built-in-shelf for easy customization. It provides 4U of space for mounting your servers or A/V equipment to a wall. This solid steel accessory has 10 - 32 tapped rails for hassle-free setup..Wall-mount server rack with shelf provides 4U of space for mounting your servers or A/V equipment to a wall.Dimensions: 10 1/2"H x 19"W x 18"D.Black steel.Frame type: Open frame.Rack type: 2-post.Maximum weight capacity: 75.2 lbs..Customize your setup with a built-in shelf that can be positioned at either the top or the bottom of the rack.Save space in your office or server room by mounting IT or AV equipment to the wall.Hassle-free setup with 10-32 tapped rails, enabling you to mount your equipment directly to the rail without cage nuts.Tie-off points for cable management.Rear opening for cable access.Includes 1 x back plate, 1 x right bracket, 1 x left bracket, 1 x shelf bracket, 2 x adjustable rails, 16 x 10-32 x 3/8 screws, 12 x 10-32 screws.RoHS compliant.Comes with lifetime warranty

The 4U 13.78in. (35cm) deep wall-mounting bracket for patch panels and network equipment, delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment up to ta total of 44lbs. (20kg). It's the perfect solution for areas where space is at a premium like small office/home office environments or spaces with limited server room because it doesn't take up any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in rack equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office or IDF. The sturdy steel construction is especially helpful for durability in harsh environments. The open frame wall rack's mounting holes are positioned 16in. apart, matching typical drywall construction framework to ensure simple and secure wall-stud anchoring. Cage nuts and screws are included with the wall-mount bracket, to save you the hassle of sourcing separate mounting hardware. The bracket is ideal for mounting equipment 12" or less in depth to ensure there is room for cabling..4U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 13.78 in [35 cm], recommended for networking equipment up to 12in deep, leaving 1.75in for cable routing; maximum weight capacity of 44 lbs. [20kg].COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware; Installs onto 16" studs with mounting holes.EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.EASY TO INSTALL: The 4U wall mounting patch panel bracket ships fully assembled and comes complete with 16x M6 Screws and 16x M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; this 4U wall mount rack backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.Mount networking equipment and shallow rackmount devices with this 4U wall-mountable rack

This server rack provides 24U of storage space in a sleek, secure cabinet for storing standard 19" rack-mount devices such as Dell®, HP® and IBM® servers, along with telecommunication and A/V equipment. The rack is compatible with EIA-310 compliant equipment and supports a total load capacity of 450 kg (992 lb.).Hassle-free equipment installation. This rack includes a variety of features that enable you to easily incorporate plenty of equipment. With adjustable mounting rails, you can easily change the rail depth from 3" up to 30.7" (76.2 mm - 780 mm) to ensure compatibility your standard rack-mount equipment. The added depth also provides support for additional cable and power management behind your equipment..Easy rack-mount equipment installation.Keeps your rack-mount equipment secure with lockable doors.Keep your equipment at an optimal temperature with passive cooling

The 4XEM's 4U 19" wall-mounted open rack provides a durable and solid design. The 4XEM 4U open wall-mountable bracket features heavy gauge material to ensure a stable installation platform. The universal standard design is compatible with 19" equipment from popular manufacturers. The 4U open bracket also provides a swing hinge to allow for easy installation of equipment and cabling. It is designed specifically for small businesses, home offices, restaurants, classrooms, and IT professionals..Wall-mounted open bracket in 4U form factor is designed specifically for small business, home offices, restaurants, classrooms, and IT professionals.Dimensions: 7.06"H x 19.72"W x 12.01"D.Made of SPCC cold-rolled steel, comes in black.Meets or exceeds EIA/ECA-310-E standards.Fits 19" equipment from popular manufacturers.Keeps all networking gear organized.Saves space and permits easy access for maintenance.Swing hinge.Cable entry on both sides and rear of rack.Weight capacity: 77.16 lbs..Mounting hole types: square (for cage nut).Weight: 7.5 lbs..Fully assembled.Package contains: a wall-mount rack, 12 M6 screws/washers/nuts, and four wall anchors (concrete).1-year manufacturer limited warranty

SEH RMK4 rack mount kit for a perfect and safe storage of your dongleserver Pro. Using the rack mount kit, you can install the dongleserver Pro into 19" server racks. It provides easy access to the device..Rack mount kit to install the dongle server Pro into 19" server racks.Product type: Rack mounting kit.Rack size: 19"

The SRWF12U38 SmartRack 12U Low-Profile Vertical-Mount Server-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices, two-post racks and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 400 pounds. Because the low-profile cabinet mounts vertically, it extends only 16 inches from the wall while housing equipment up to 35 inches deep, including 1U servers, UPS systems, battery packs and switches. In addition to 8U of rack space in the primary mounting area, it also includes a 4U mounting space at the top of the enclosure for patch panels. The top cover and front panel are removable to allow expedient access to equipment. The cover also locks securely with the included keys to help prevent damage, tampering or theft. The vented cabinet allows air to flow freely and keep equipment cool. Convenient top, bottom and side ports allow easy cable routing. The SRWF12U38's modular design allows you to disassemble the cabinet in minutes for wall-mounting with user-supplied hardware. Mounting holes are spaced 16 inches apart to accommodate standard wall studs. Equipment installation is easy with threaded mounting holes that support 12-24 mounting in two-post racks. Features Saves Valuable Workspace Recommended for areas with limited floor space where you need equipment to be secure, organized and out of the way. Houses EIA-standard 19 in. rack equipment in 8U of space. Also includes 4U of mounting space at the top of the enclosure for patch panels. Extends only 16 in. from the wall while housing equipment up to 35 in. deep. Maximum load capacity of 400 lb. Keeps Important Equipment Secure Top cover locks securely to help prevent damage, tampering or theft. Vented cabinet keeps equipment cool. Convenient ports with removable covers allow cable routing through top, bottom and sides Easy Enclosure and Equipment Installation Modular design for easy disassembly and assembly. Wall-mounting holes spaced 16 in. apart for standard wall stud placement. Threaded mounting holes support 12-24 mounting in 2-post racks. Rack spaces marked for easy reference Meets Payment Card Industry Standards Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance.Maximum load capacity of 400 lb..Locking steel cabinet vented to keep equipment cool.Secures 8U of 19 in. rack equipment up to 35 in. deep.Includes additional 4U of space for patch panels.Modular design for easy disassembly and assembly

Innovation Conversion Kit has EIA standard square hole pattern for rack mount servers with 2 post center mount conversion. 2U-7U server rack mounting kit allows users to create 4 post cabinets on 2 post rack or mount 4 post equipment on 2 post racks..Compatibility: HP-Compaq ProLiant DL580 G2 (4U).Hole type: EIA standard square hole pattern for rack mount servers.Rack type: 2Post.Height (rack units): 4U.Server compatibility: Dell, HP, IBM and others.Innovation Conversion Kit allows compatible servers to be mounted in relay rocks and contains four brackets, hardware and installation instructions.