24 AWG Ethernet Cables

The C2G ® 3' white Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.Length: 3 ft.Connectors: 1 x RJ-45 - male.Connectors (Other Side): 1 x RJ-45 - male.Color: White.Manufacturer Warranty: Limited lifetime warranty.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.12 lbs..Comes with lifetime warranty

The C2G 3975 6' blue Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Dimensions: 6'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Type: Patch cable - CAT 6.Technology: UTP.Wiring Scheme: T568B.Wires per Cable: 8 wires.Features: Snagless, stranded , minimized Near-End Crosstalk (NEXT), reduced structural return loss (SRL).Manufacturer Warranty: Limited lifetime warranty

The C2G 22014 15' Cat6 snagless black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.15 ft.Black.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.4 lbs..Comes with lifetime warranty.The StarTech Slimline Serial DB9 gender changer is a reliable way to convert a nine-pin female port to a nine-pin male port.

Make Gigabit Ethernet connections with PoE support. This Cat6 cable delivers reliable Gigabit network connections, which ensures high-performance capability for your demanding Ethernet applications. Find the length and color you needThis 1-foot gray patch cable is perfect for use in server closets, patch panels and with Ethernet hubs. The cable is intended for short-distance applications such as point-to-point in-rack and across-rack network switch and server connections. For easier network installations, our Cat6 patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance.100% copper for outstanding valueGet the highest value for your cable investment with our Cat6 Ethernet cables. Each of our patch cables is manufactured using high-quality copper conductors and they are carefully constructed and tested, to keep Near-End Crosstalk (NEXT) well within acceptable limits.24-gauge wire for high-performance network connectionEnsure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet and 4K or 1080p video streaming, using cables that include 24 AWG copper.50-micron gold connectors provide peak conductivityYou can rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. The N6PATCH1GR is backed by StarTech.com's lifetime warranty for guaranteed reliability..RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Gray PVC jacket for color coding your connections.1 ft. in length for shorter connections, without the clutter of excess cable

StarTech.com® Bulk roll Cat5e cable in blue color is suitable for network installation at home, office and educational institution. It is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. The 1000' cable has eight 24 AWG conductors for providing reliable connection and high data transfer speed. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. It is easy to install on walls, conduit, ceiling and other vertical places involving Ethernet network applications..Utp cable is ideal for network installation at home, office or educational institution.Easy-to-install 1000' long cord.Ultra flexible PVC jacket offers double shielding against outside noise.Comes in blue color for a new look.Meets CMR flame retardant test to minimize fire hazards.4 pair UTP conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.The 350 MHz rated cable offers brilliant performance and bandwidth over the standard 100Mhz Category 5e specifications.Meets all requirements and standards of RoHS, Industry Standards: Category 5, CMR.Includes 1 x 1000' bulk roll of blue CMR Cat5e solid UTP cable.CMR rated for use in walls, conduit, ceiling and other vertical applications.Comes with limited lifetime warranty.StarTech.com® WIRC5ECMR 1000' Blue Cat5e cable offers enough bandwidth to carry 350 MHz signal in Ethernet network applications. The 4-pair UTP conductors offer true connection.

The C2G 31341 5' Cat6 snagless white network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G ® 5' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty

Avoid having excess Ethernet cable lying around by building your own cables to the exact length needed using this Bulk Ethernet Copper Cable from Monoprice! Features: Unshielded Twisted Pair (UTP) Category 5e Ethernet cable 24AWG solid, pure bare copper conductors CMR (Riser) fire safety rating 350MHz bandwidth 500 foot roll Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

Monoprice® Flexboot Series 25' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in green color has snagless strain relief boots and offers high performance..Green.Cat6.With a blazing speed of up to 550 MHz, can connect to LAN/WAN segments and networking gear at maximum speed.25'.Gauge: 24 AWG.Gold-plated connectors.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.High quality patch cables are the solution to your internetworking needs.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® Flexboot Series 25' Cat6 UTP Ethernet network cable in green color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.

The C2G 27152 7' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 7'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color and features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.22 lbs..Comes with lifetime warranty

Juniper® EX-SFP-10GE-DAC-5M Network cable has SFP+ passive twinax connector type for reliable operation. With 16.4' long, this cable has copper conductor for high conductivity. This cable with supply voltage of 3.3 V consumes a power of 0.57 W and has characteristic impedance of 100 Ohms. Hot-removable cable allows you to disrupt the cable without powering OFF the switch. Deployed with full-duplex serial transmission, cable transfers at a speed of 10 Gb/s..Twinax cable for easy signal transmission.Compatible with Juniper Networks EX2500 ethernet switch.Has cable length of 16.4' for convenience.Has supply voltage of 3.3 V for optimum device performance.Provides copper conductors for high conductivity.Has SFP+ connector on first end that provides highest flexibility for network.Has 10- Gb/s full-duplex serial transmission data transfer rate and wire accommodates a size of 24 AWG.Has minimum cable bend radius of 1", cable characteristic impedance of 100 Ohms and 2% maximum crosstalk.Has power supply of 0.57 W for improved reliability.Has storage temperature of -40-85 deg C for precise operation.Time delay: 1.31 nsec/ft.Rate: 10 Gb/s full-duplex serial transmission.Connector type: SFP+ passive twinax cable assembly.Wire AWG: 24 AWG.Minimum cable bend radius: 1".Juniper® SFP+ Ethernet attach copper twinax cable of 16.4' long works at a data transfer speed of 10 Gb/s. Reduces crosstalk between pairs and accommodates wire of 24 AWG.

StarTech.com® UTP Cat 5e Patch cable in black color offers reliable signal routing in IT hardware of 350 MHz Ethernet networks. It is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. The 50' cable has eight 24 AWG stranded conductors to transfer data at a high-speed through the Ethernet network equipments. Molded design of the male-to-male connector protects RJ45 tab from damages such as wear and tear during installation. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission..Utp patch cable for use with fast ethernet networks with power over ethernet capability.Easy-to-install 50' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.Constructed with top quality component minimizes crosstalk and interference.Comes in black color for a new look.Molded cable offers flexibility.Meets CMG flame retardant test to minimize fire hazards.4 Pair STP conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.CAT5e rated cable provides performance of up to 350 MHz.Incorporated with colored hoods for departmental color coding.50-micron gold connectors for peak conductivity.Meets all requirements and standards of RoHS.Includes 1 x 50' grey molded Cat 5 patch cable.Designed for use with Fast Ethernet networks, patches from hub to distribution panel.Comes with limited lifetime warranty.StarTech.com® M45PATCH50BK 50' Black UTP Cat 5e patch cable is useful for Ethernet network application. Molded RJ45 connectors offers reliable connection.

Save the time and hassle of building Ethernet cables by using fixed-length UTP Cat5e Ethernet Network Cables from Monoprice! The FLEXboot Series of cables feature a thinner cable boot protecting the plug retaining clip, which makes it much easier to depress the clip and protective cover. Features: Unshielded Twisted Pair (UTP) Category 5e Ethernet cable 24AWG stranded, pure bare copper conductors 350MHz bandwidth Snagless cable boot protects the plug retaining clip Thinner cable boot makes it easier to depress the clip and protective cover 50µm gold plated contacts 7-foot length (tip to tip) Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

The N201-06N-WH Premium Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. This six-inch white cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG four-pair stranded UTP with a rugged PVC jacket, the N201-06N-WH delivers speeds up to 550 MHz/1 Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum. The RJ45 short-body connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Corrosion-resistant gold-plated copper contacts provide maximum conductivity and minimize data loss. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. Meets most other current industry standards, including IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11)..Premium cabling for Cat6 home/office network applications.Rated for 550 MHz/1 Gbps communications.Snagless connectors prevent damaged tabs during installation.24 AWG 4-pair stranded UTP with PVC jacket.Integral strain relief protects connectors from stress and cracking.Certifications & Standards: IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11)

Premium cabling for Cat6 home/office network applications.Rated for 550 MHz/1 Gbps communications.Snagless connectors prevent damaged tabs during installation.24 AWG 4-pair stranded UTP with PVC jacket.Integral strain relief protects connectors from

The C2G 31341 5' Cat6 snagless red network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G 31341 5' Cat6 snagless black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

Make Gigabit Ethernet connections with PoE support. This Cat6 cable delivers reliable Gigabit network connections, which ensures high-performance capability for your demanding Ethernet applications. Find the length and color you needThis 2-foot purple patch cable is perfect for standard applications such as connecting from a wall jack to your laptop docking station or desktop computer. For easier network installations, our Cat6 patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance.100% copper for outstanding valueGet the highest value for your cable investment with our Cat6 Ethernet cables. Each of our patch cables is manufactured using high-quality copper conductors and they are carefully constructed and tested, to keep Near-End Crosstalk (NEXT) well within acceptable limits.24-gauge wire for high-performance network connectionsEnsure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet and 4K or 1080p video streaming, using cables that include 24 AWG copper.50-micron gold connectors provide peak conductivityYou can rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. The N6PATCH2PL is backed by StarTech.com's lifetime warranty for guaranteed reliability..RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Purple PVC jacket for color coding your connections.2 ft. in length

The C2G ® 6" RJ-45 male/male Cat6 blue snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. It features RJ-45 male connectors on both ends for enhanced connectivity. The 24 AWG stranded bare copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. This bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modems, DSL/cable modems, patch panels and other high performance networking applications..Type: Network Cable.Cable Type: Category 6.Cable Length: 0.5'.Size: 6".Color: Blue.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color.Diameter: 6.2 mm + 0.03 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.03 lbs..Comes with lifetime warranty.952 C2G - KVM & Networking 6" Cat6 Snagless Unshielded Network Patch Cable - Exponentially reduces impedence and structural return losses

CAT6 PATCH CABLE 5FT BLUE.Cat6 UTP snagless patch cable is perfect for VoIP, video and file transfers.Cable length: 5'.Has one RJ-45 male connector on both the ends for reliable connectivity.Features HDPE insulation and 4 pairs of 24 AWG copper conductors for better conductivity.ISO/IEC 11801 and TIA/EIA-568-B.2-1 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Belkin OmniView SMB 1x16 KVM-over-IP switch, SMB 1x8 KVM-over-IP switch and SMB CAT5 KVM switch.Comes in blue color.Enhances your network speed with higher bandwidth.Diameter: 5.9 mm + 0.15 mm jacket.Voltage: 300 V, Dielectric strength: 1.5 kV (AC).Resistance: 93.8 Ohm/km/20 deg C max, Impedance: 100 Ohm + 15 Ohm at 1 - 550 MHz.Mutual capacitance: 56 pF/m max.Temperature: 75 deg C.Propagation delay: 536 ns/100 m max at 550 MHz, Structural return loss: 8.6 dB min at 550 MHz.Staggered pin configuration for secure connection.CM flame retardant test.Comes with lifetime limited warranty

The C2G® 10' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.25 lbs..Comes with lifetime warranty

The C2G 27153 10' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..RJ-45 Male.10ft.Black.Features black polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.25 lbs..Comes with lifetime warranty.6 outlets surge protector features 15 A, 120 V, 1800 W, 2 position on/off switch/15 A AC circuit breaker.

The N201-006-PU Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this six-foot purple cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire.Manufactured from 24 AWG copper wire and protected by a rugged PVC jacket, the four-pair stranded UTP N201-006-PU delivers speeds up to 550 MHz/1 Gbps with minimal near-end crosstalk (NeXT)..Rated for 550 MHz/1 Gbps communications.Snagless RJ45 connectors protect against broken tabs.Meets Cat6 TIA/EIA standards.High-quality 24 AWG stranded copper wire.Reduces impedance and structural return loss.Certification and Standards: RoHS

Make Gigabit Ethernet connections with PoE support. This Cat6 cable delivers reliable Gigabit network connections, which ensures high-performance capability for your demanding Ethernet applications. Find the length and color you needThis 20-foot black patch cable is perfect for use in network conduits and raceways. The cable is intended for longer distance applications, such as running up a post or throughout the office from a hub to a wall jack. For easier network installations, our Cat6 patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance.100% copper for outstanding valueGet the highest value for your cable investment with our Cat6 Ethernet cables. Each of our patch cables is manufactured using high-quality copper conductors and they are carefully constructed and tested, to keep Near-End Crosstalk (NEXT) well within acceptable limits.24-gauge wire for high-performance network connectionEnsure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet and 4K or 1080p video streaming, using cables that include 24 AWG copper.50-micron gold connectors provide peak conductivityYou can rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. The N6PATCH20BK is backed by StarTech.com's lifetime warranty for guaranteed reliability..RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Black PVC jacket for color coding your connections.20 ft. in length for longer connections

DNPTripp Lite N200-015-BL 15' Blue RJ-45 to RJ-45 Male/Male Cat6 Gigabit Molded Patch Cable.Cat6 Gigabit molded patch cable connects computers, printers, video game systems, Blu-ray players, copy machines, routers and modems.Cable length: 15'.Color: Blue, Material: PVC jacket.Connectors: One RJ-45 male on both the ends.Conductor: 4 pair 24 AWG stranded UTP with gold-plated copper contacts for accurate signal transfer.Communication: Rated for 550 MHz/1 Gb/s.Designed for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, token ring type 3 and EIA/TIA applications.Flawless signal delivery with minimal near-end crosstalk levels.Molded integral strain relief for long life.RoHS Compliant.Comes with lifetime limited warranty.Photo-safe, versatile machine works with multiple pouch sizes.Laminate documents and photos up to 9" wide and pouches with a thickness up to 5 mil.Sleek, portable design also includes two-roller system with two temperature settings, fold-in-tray, cord storage and handle.Thermal laminator combo pack contains one laminator and 20 high-quality laminating pouches.Includes 20 x thermal laminating letter-size pouch

Make Gigabit Ethernet connections with PoE support. This Cat6 cable delivers reliable Gigabit network connections, which ensures high-performance capability for your demanding Ethernet applications. Find the length and color you needThis 8-foot green patch cable is perfect for standard applications such as connecting from a wall jack to your laptop docking station or desktop computer. For easier network installations, our Cat6 patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance.100% copper for outstanding valueGet the highest value for your cable investment with our Cat6 Ethernet cables. Each of our patch cables is manufactured using high-quality copper conductors and they are carefully constructed and tested, to keep Near-End Crosstalk (NEXT) well within acceptable limits.24-gauge wire for high-performance network connectionsEnsure high-performance capability for your demanding Ethernet applications, such as Power-over-Ethernet and 4K or 1080p video streaming, using cables that include 24 AWG copper.50-micron gold connectors provide peak conductivityYou can rely on our RJ45 connectors to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion. The N6PATCH8GN is backed by StarTech.com's lifetime warranty for guaranteed reliability..RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Green PVC jacket for color coding your connections.8 ft. in length

Green.Category 6 RJ45 Male/RJ45 Male.Molded connectors with integral strain relief.7'.Material: Polyvinyl chloride (PVC) jacket.Conductor: Copper.Applications: Cabling for category 6, category 5e and category 5 applications.Technology: Unshielded twisted pair (UTP).System requirements: For 1000 Base-T (1 Gbps ethernet), 10/100 Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications as well as EIA/TIA applications.Communications: 550 MHz/1 Gbps.Provides EMI/RFI shielding in ethernet networks, molded boot for extra strain-relief and durability.Shielded RJ45, with 50-micron gold plated contacts, 4-pair 24 AWG stranded STP with drain wire.TSB 568B (AT and T 258A)wiring.Includes Cat6 patch cable, 7' Cat6 Gigabit patch cord snagless molded.Compliant and standards: IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL (category 5e draft 11).Warranty: Lifetime limited

Make Power-over-Ethernet-capable Gigabit network connections - 50ft Cat6 Cable / 50' Ethernet Patch Cable / 50 ft Gigabit Cat6 Cable - Yellow Gigabit Snagless Cat6 Patch Cable / ETL Verified / UTP Cat 6 Cable - 50 ft RJ45 Male to Male Patch Cord - 24 AWG / 100% Copper / 50-micron Gold Connectors - Designed for use with Gigabit networks - Patches from hub to distribution panel - Connects workstation to wall outlet - Guaranteed reliability with a lifetime warranty.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty

Make Power-over-Ethernet-capable Gigabit network connections - 10ft Cat6 Cable / 10' Ethernet Patch Cable / 10 ft Gigabit Cat6 Cable - Green Gigabit Snagless Cat6 Patch Cable / ETL Verified / UTP Cat 6 Cable - 10 ft RJ45 Male to Male Patch Cord - 24 AWG / 100% Copper / 50-micron Gold Connectors - Designed for use with Gigabit networks - Patches from hub to distribution panel - Connects workstation to wall outlet - Guaranteed reliability with a lifetime warranty.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by Startech lifetime warranty

The C2G® 3' male to male category 5e gray snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Snagless patch cable resists breakage.Cable length: 3'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 24 AWG stranded bare copper, Construction: Polycarbonate.Certifications and standards: Meets RoHS and Cat5e TIA/EIA standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in gray color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.09 lbs..Comes with lifetime warranty.StarTech.com® HDDVIFM8IN 8" HDMI to DVI-D Cable adapter effectively routes video signal between DVI-D and HDMI devices. Supports 1920 x 1200 resolution video signal.

The N201-006-OR Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this six-foot orange cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire..Rated for 550 MHz/1 Gbps communications.Snagless RJ45 connectors protect against broken tabs.Meets Cat6 TIA/EIA standards.High-quality 24 AWG stranded copper wire.Reduces impedance and structural return loss.Certification and Standards: RoHS

StarTech.com's 6ft (Orange) Cat5e UTP Snagless Patch Cable is constructed of only top quality materials (100% Copper core, 24 Guage Wire, 50 micron Gold Connectors) ensuring optimum durability and is backed by our Lifetime Warranty..50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat5e cable runs.Backed by StarTech.com lifetime warranty.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components

Tripp Lite 2' Molded gigabit patch cable in blue color has 2 RJ45 male connectors and features boots with integral strain relief. Cable has snagless design which protects the locking tabs and provides cabling for category 6, 5 and 5e applications..2' Blue Category 6 RJ45 Male to RJ45 Male.Made for Polyvinyl chloride(PVC) jacket.Copper Conductor.Compatible with Networking devices.Used for Computer networking.Unshielded twisted pair (UTP).For 1000Base-T (1Gbps ethernet), 10/100Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type3 applications as well as EIA/TIA applications.Provides EMI/RFI shielding in ethernet networks, molded boot for extra strain-relief and durability.Shielded RJ45, with 50-micron gold plated contacts, 4-pair 24 AWG stranded STP with drain wire.Includes 2' Cat6 blue gigabit patch cord snagless molded.Compliant and standards: IEEE 802.3ab/ IEEE 802.5/ ANSI/EIA/TIA 568/ ISO/IEC 11801/ ETL/ RoHS.Lifetime Warranty.Tripp Lite 2' Molded gigabit patch cable in blue color is manufactured from PVC 4-pair stranded UTP and is suitable for 550 MHz/1 Gb/s communication.

Improve voice and data capabilities with this 3-foot cable. A staggered-pin design and high-quality copper wire reduce the risk of cross-talk. With performance speeds of up to 1Gbps, this Tripp Lite Cat6 cable delivers high-speed transfer rates..Use snagless molded patch cables for distributing data, voice, and video at higher speeds.Patch cable length: 3'.Cable connects through 1 x RJ-45 male to 1 x RJ-45 male.Cable has 24 AWG.High-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum.Meets or exceeds RoHS standards.Cable made by UTP technology.Features molded connectors with integral strain relief.Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation.Deliver stable performance up to 550MHz/1Gbps communication.Lifetime manufacturer limited warranty.Cut down office time distributing data with this Tripp Lite Cat6 patch cable.

Make Power-over-Ethernet-capable Gigabit network connections - 3ft Cat6 Cable / 3' Ethernet Patch Cable / 3 ft Gigabit Cat6 Cable - Black Gigabit Snagless Cat6 Patch Cable / ETL Verified / UTP Cat 6 Cable - 3 ft RJ45 Male to Male Patch Cord - 24 AWG / 100% Copper / 50-micron Gold Connectors - Designed for use with Gigabit networks - Patches from hub to distribution panel - Connects workstation to wall outlet - Guaranteed reliability with a lifetime warranty.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by StarTech lifetime warranty.Constructed with top quality components

This Cat6 (molded) patch cable is ETL verified to meet/exceed all Category 6 performance standards. Features molded strain relief to help prevent connector damage, 23 Gauge wire construction and 50 micron gold connectors. Backed by Lifetime Warranty..Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Backed by StarTech.com lifetime warranty.Molded RJ45 connectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire

Save the time and hassle of building Ethernet cables by using fixed length UTP Cat6 Ethernet Network Cables from Monoprice! The FLEXboot Series of cables feature a thinner cable boot protecting the plug retaining clip, which makes it much easier to depress the clip and protective cover. Features: Unshielded Twisted Pair (UTP) Category 6 Ethernet cable 24AWG stranded, pure bare copper conductors 550MHz bandwidth Snagless cable boot protects the plug retaining clip Thinner cable boot makes it easier to depress the clip and protective cover 50µm gold plated contacts Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code (NEC) TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

The UISP-Cable-Pro is a Category 5e cable with a highly insulating, weatherproof jacket that prevents damage from rain, snow, and other extreme climatic conditions. The cable is also fortified with internal foil shielding and a drain wire that collectively shield it from electrostatic discharge (ESD) and allow it to maintain Gigabit Ethernet link rates even when electromagnetic interference is present..This cable is perfect for connecting your data devices.Cable length: 1000'.24AWG black cable has copper conductor with polyethylene jacket.Cable is solid and suitable for outdoors.Meets or exceeds ANSI/TIA-568-C.2 and ISO/IEC 11801 standards

The C2G ® 3' blue Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

The StarTech 75' snagless Cat6 patch cable in black color, has one RJ-45 male connector on both the ends. The 24 AWG copper conductor and 50-micron gold plated connector ensure optimal signal conductivity. With its polyvinyl chloride jacket, this patch cable ensures long lasting durability. It comes with colored hoods for departmental color coding and easy identification. This tested patch cable keeps near end crosstalk (NEXT) well within acceptable limits..75' Cable length.One RJ-45 male connector on both the ends.Wired Connectivity.24 AWG Conductor size.Copper conductor with Polyvinyl chloride (PVC) Jacket.Meets RoHS, ETL verified, TIA/EIA-568-B.1-2001 T568B certifications and standards.Black cable with 50-micron gold plated Connector plating.Cat6 - 500 MHz Cable Rating, 4 pair UTP Connectors, and CMG rated (general purpose) Fire rating.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color-coding.Constructed with top quality components.Includes patch cable.Comes with lifetime warranty.Ensure high-performance capability for your demanding ethernet applications.Meets all requirements and standards of RoHS, Wiring Standard: TIA/EIA-568-B.1-2001 T568B.Includes 1 x 75' black snagless ETL verified Cat6 UTP patch cable.Designed for use with Gigabit networks, patches from hub to distribution panel.Comes with limited lifetime warranty.The StarTech N6PATCH75BK 75' Black UTP Cat 6 patch cable provides PoE capable gigabit network application.