6' Fiberglass Ladders
7 results
The FS1406HD fiberglass 6' twin step ladder has a duty raiding of 375 lbs. Allows two users to work on the same ladder simultaneously to easily accomplish tasks that would be more difficult for a single person..Type IAA duty rating step ladder made of fiberglass.Twin step ladder is 72" L x 22.6" W with an approximate 40.9" spread.Work station top designed to increase ladder productivity.DaBoot™ for slip resistant footing.Heavy gauge steel hinges.Inside spreader braces.Double-rivet step construction
The FM1506 fiberglass 6' twin step ladder has a duty raiding of 300 lbs. Allows two users to work on the same ladder simultaneously to easily accomplish tasks that would be more difficult for a single person. Solid non-conductive fiberglass rails for working near electricity..Type IA duty rating step ladder made of fiberglass.Twin step ladder is 72" L x 22.8" W with an approximate 52.3" spread.Equipped with SHOX™ impact absorption system for damage prevention.Twin-sided ladder has heavy-gauge steel hinges for durability.Raptor Boot slip-resistant Boot.Inside spreader braces.Double-rivet step construction.Heavy gauge steel hinges
The L6206 fiberglass 6' leaning ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. Double riveted slip-resistant Traction-Tred steps..Type IA duty rating leaning ladder made of fiberglass.Leaning ladder is 74.4" L x 24" W with an approximate 38" spread.Rated to hold up to 300 lbs..Top dimension is 7" D x 13" L.LEANSAFE Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity.Dropped rear rail pivot point gets ladder closer to your work.Color and branding differentiates LEANSAFE from standard step ladders.Rail latch, with single action opening and closing, locks the rear rail to the front rail to keep the ladder in leaning mode.Curved footpad on front feet maximize surface contact with the ground in both leaning mode and step ladder mode.Back-up plates reinforce all top connectors.Heavy-duty internal spreaders.Full set of rear horizontals spaced one per foot.EDGE360 bracing protects the ladder feet from every angle.Every rivet backed up by metal, metal plates, or washer to protect rails.Six-foot LEANSAFE leaning ladder inches step ladder mode has a maximum standing height of 3' 10" and a maximum reach height of 10'.Six-feet LEANSAFE leaning ladder inches leaning mode has a maximum standing height of 2' 10"s and a maximum reach height of 9'
The T7406 fiberglass 6' twin step ladder has a duty rating of 375 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 72" L x 25" W with an approximate 50.13" spread.Rated to hold up to 375 lbs. per side.Top dimension is 8.25" D x 14.5" L.Heavy gauge aluminum extruded top with thick side plates.Back-up aluminum plates reinforce all top connectors.Shoulder bolt and lock nut on top hinge; four solid aluminum rivets attach top to each rail.Slip-resistant Traction-Tred steps are double riveted and knee-braced.Extra heavy-duty internal aluminum spreaders.Rubber step bumpers to resist damage.EDGE bracing system helps to decrease damage to rail.GLAS*MARK Violator stripes on rails allow the ladder to be more visible.Aluminum external rail shield helps protect against abrasion damage.Shoe pads riveted to the EDGE structure.Every rivet backed up by metal, metal plates, or washer to protect rails.Designed for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The 6206 fiberglass 6' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 72" L x 23.4" W with an approximate 41.25" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The T6206 fiberglass 6' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 72" L x 23.4" W with an approximate 50.13" spread.Rated to hold up to 300 lbs. per side.Top dimension is 8.5" D x 13" L.High performance dual HolsterTop paint and tool holder.Four rivets attach top to each rail.Double riveted slip-resistant Traction-Tred steps.Heavy-duty internal spreaders.All steps are knee-braced.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Design for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The PD6206 fiberglass 6' podium ladder has a duty rating of 300 lbs. and features 3" front rails with 1.875" rear rails. A full set of rear horizontals are spaced one foot apart..Type IA duty rating reach height podium ladder made of fiberglass.Podium ladder is 108" L x 31.5" W with 12' reach height and an approximate 56" spread.Rated to hold up to 300 lbs..Platform is 19.5" D x 16" W.Same reach height as a 8' step ladder.4X Work Zone to reach all directions.Extra-large platform for long standing comfort.LOCKTOP extended guardrail securely wraps around the work zone and holds an arsenal of tools.EDGE360 includes an integrated rail shield, EDGE bracing and oversized foot pads.Double riveted slip-resistant Traction-Tred steps.Back-up plates reinforce all top connectors.All steps and two rear horizontals are knee-braced
You May Also Like
The 6207 fiberglass 7' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 84" L x 25.12" W with an approximate 47.5" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The 6205 fiberglass 5' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 60" L x 21.6" W with an approximate 35.13" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The 6204 fiberglass 4' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 48" L x 19.92" W with an approximate 29" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The T6210 fiberglass 10' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 120" L x 30.36" W with an approximate 78.13" spread.Rated to hold up to 300 lbs. per side.Top dimension is 8.5" D x 13" L.High performance dual HolsterTop paint and tool holder.Four rivets attach top to each rail.Double riveted slip-resistant Traction-Tred steps.Heavy-duty internal spreaders.All steps are knee-braced.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Design for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The 6203 fiberglass 3' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 36" L x 18.12" W with an approximate 23.13" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The T6208 fiberglass 8' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 96" L x 26.84" W with an approximate 64.13" spread.Rated to hold up to 300 lbs. per side.Top dimension is 8.5" D x 13" L.High performance dual HolsterTop paint and tool holder.Four rivets attach top to each rail.Double riveted slip-resistant Traction-Tred steps.Heavy-duty internal spreaders.All steps are knee-braced.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Design for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The T6204 fiberglass 4' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 48" L x 19.92" W with an approximate 36.13" spread.Rated to hold up to 300 lbs. per side.Top dimension is 8.5" W x 13" L.High performance dual HolsterTop paint and tool holder.Four rivets attach top to each rail.Double riveted slip-resistant Traction-Tred steps.Heavy-duty internal spreaders.All steps are knee-braced.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Design for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The T7408 fiberglass 8' twin step ladder has a duty rating of 375 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 96" L x 28.68" W with an approximate 64.13" spread.Rated to hold up to 375 lbs. per side.Top dimension is 8.25" D x 14.5" L.Heavy gauge aluminum extruded top with thick side plates.Back-up aluminum plates reinforce all top connectors.Shoulder bolt and lock nut on top hinge; four solid aluminum rivets attach top to each rail.Slip-resistant Traction-Tred steps are double riveted and knee-braced.Extra heavy-duty internal aluminum spreaders.Rubber step bumpers to resist damage.EDGE bracing system helps to decrease damage to rail.GLAS*MARK Violator stripes on rails allow the ladder to be more visible.Aluminum external rail shield helps protect against abrasion damage.Shoe pads riveted to the EDGE structure.Every rivet backed up by metal, metal plates, or washer to protect rails.Designed for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The T7404 fiberglass 4' twin step ladder has a duty rating of 375 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 48" L x 21.5" W with an approximate 36.13" spread.Rated to hold up to 375 lbs. per side.Top dimension is 8.25" D x 14.5" L.Heavy gauge aluminum extruded top with thick side plates.Back-up aluminum plates reinforce all top connectors.Shoulder bolt and lock nut on top hinge; four solid aluminum rivets attach top to each rail.Slip-resistant Traction-Tred steps are double riveted and knee-braced.Extra heavy-duty internal aluminum spreaders.Rubber step bumpers to resist damage.EDGE bracing system helps to decrease damage to rail.GLAS*MARK Violator stripes on rails allow the ladder to be more visible.Aluminum external rail shield helps protect against abrasion damage.Shoe pads riveted to the EDGE structure.Every rivet backed up by metal, metal plates, or washer to protect rails.Designed for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder
The 6104 fiberglass 4' step ladder has a duty rating of 300 lbs. and features oversized, molded Proguard Boot for firm slip-resistant footing. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 48" L x 19" W with an approximate 28.88" spread.Double riveted slip-resistant 3" Traction-Tred steps, rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.HolsterTop with Lock-In System secures tools to increase productivity.Back-up plates reinforce all top connectors.Braces on top and bottom step.Double riveted slip-resistant Traction-Tred steps.Full set of rear horizontals spaced one per foot.Heavy-duty internal spreaders.Also available, optional manual pail shelf kit, Model PK76-9 , and automatic closing pail shelf kit Model PK76-3
The 6210 fiberglass 10' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 120" L x 30.36" W with an approximate 65.88" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The 6212 fiberglass 12' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Step ladder made of fiberglass.Step ladder is 144" L x 33.84" W with an approximate 78.25" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety
The P6202 fiberglass 2' platform ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. A full set of rear horizontals are spaced one foot apart..Type IA duty rating reach height platform ladder made of fiberglass.Platform ladder is 48" L x 23.4" W with 8' reach height and an approximate 29.75" spread.Rated to hold up to 300 lbs..Platform is 14.6" D x 15" W.Back-up plates reinforce all top connectors.Large platform provides secure and comfortable work area.Slip-resistant Traction-Tred steps are double riveted.Full set of rear horizontals spaced one foot apart.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails
The 7407 fiberglass 7' step ladder has a duty rating of 375 lbs. and features 3" metal steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IAA duty rating step ladder made of fiberglass.Step ladder is 84" L x 26.84" W with an approximate 49" spread.Rated to hold up to 375 lbs..Top dimension is 7.25" D x 14.875" L.Extra heavy-duty aluminum HolsterTop with thick side plates.Back-up plates reinforce all top connectors.Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each front rail.Slip-resistant Traction-Tred steps are double riveted and have extra wide knee braces.Full set of rear horizontals are knee braced and spaced one per foot.Extra heavy-duty internal aluminum spreaders.Aluminum external rail shield helps protect against abrasion damage.GLAS*MARK Violator stripes on rails allow the ladder to be more visible.Slip-resistant foot pads attached to the EDGE structure.EDGE bracing system helps to decrease damage to rail.Every rivet backed up by metal, metal plates, or washer to protect rails.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2
The 6110 fiberglass 10' step ladder has a duty rating of 300 lbs. and features oversized, molded Proguard Boot™ for firm slip-resistant footing. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 120" L x 28" W with an approximate 65.75" spread.Double riveted slip-resistant 3" Traction-Tred steps, rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.HolsterTop with Lock-In System secures tools to increase productivity.Back-up plates reinforce all top connectors.Braces on top and bottom step.Double riveted slip-resistant Traction-Tred steps.Full set of rear horizontals spaced one per foot.Heavy-duty internal spreaders.Also available, optional manual pail shelf kit, Model PK76-9 , and automatic closing pail shelf kit Model PK76-3
The L6212 fiberglass 12' leaning ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. Double riveted slip-resistant Traction-Tred steps..Type IA duty rating leaning ladder made of fiberglass.Leaning ladder is 146.4" L x 34.85" W with an approximate 75" spread.Rated to hold up to 300 lbs..Top dimension is 7" D x 13" L.LEANSAFE Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity.Dropped rear rail pivot point gets ladder closer to your work.Color and branding differentiates LEANSAFE from standard step ladders.Rail latch, with single action opening and closing, locks the rear rail to the front rail to keep the ladder in leaning mode.Curved footpad on front feet maximize surface contact with the ground in both leaning mode and step ladder mode.Back-up plates reinforce all top connectors.Heavy-duty internal spreaders.Full set of rear horizontals spaced one per foot.EDGE360 bracing protects the ladder feet from every angle.Every rivet backed up by metal, metal plates, or washer to protect rails.Twelve-foot LEANSAFE leaning ladder inches step ladder mode has a maximum standing height of 9' 7" and a maximum reach height of 16'.Twelve-feet LEANSAFE leaning ladder inches leaning mode has a maximum standing height of 6' 8"s and a maximum reach height of 13'