10 Ft Ladders

The 6212 fiberglass 12' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Step ladder made of fiberglass.Step ladder is 144" L x 33.84" W with an approximate 78.25" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety

The 6206 fiberglass 6' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 72" L x 23.4" W with an approximate 41.25" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety

The 6207 fiberglass 7' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 84" L x 25.12" W with an approximate 47.5" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety

The 6203 fiberglass 3' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 36" L x 18.12" W with an approximate 23.13" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety

The 6104 fiberglass 4' step ladder has a duty rating of 300 lbs. and features oversized, molded Proguard Boot for firm slip-resistant footing. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 48" L x 19" W with an approximate 28.88" spread.Double riveted slip-resistant 3" Traction-Tred steps, rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.HolsterTop with Lock-In System secures tools to increase productivity.Back-up plates reinforce all top connectors.Braces on top and bottom step.Double riveted slip-resistant Traction-Tred steps.Full set of rear horizontals spaced one per foot.Heavy-duty internal spreaders.Also available, optional manual pail shelf kit, Model PK76-9 , and automatic closing pail shelf kit Model PK76-3

The L6212 fiberglass 12' leaning ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. Double riveted slip-resistant Traction-Tred steps..Type IA duty rating leaning ladder made of fiberglass.Leaning ladder is 146.4" L x 34.85" W with an approximate 75" spread.Rated to hold up to 300 lbs..Top dimension is 7" D x 13" L.LEANSAFE Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity.Dropped rear rail pivot point gets ladder closer to your work.Color and branding differentiates LEANSAFE from standard step ladders.Rail latch, with single action opening and closing, locks the rear rail to the front rail to keep the ladder in leaning mode.Curved footpad on front feet maximize surface contact with the ground in both leaning mode and step ladder mode.Back-up plates reinforce all top connectors.Heavy-duty internal spreaders.Full set of rear horizontals spaced one per foot.EDGE360 bracing protects the ladder feet from every angle.Every rivet backed up by metal, metal plates, or washer to protect rails.Twelve-foot LEANSAFE leaning ladder inches step ladder mode has a maximum standing height of 9' 7" and a maximum reach height of 16'.Twelve-feet LEANSAFE leaning ladder inches leaning mode has a maximum standing height of 6' 8"s and a maximum reach height of 13'

The T6208 fiberglass 8' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 96" L x 26.84" W with an approximate 64.13" spread.Rated to hold up to 300 lbs. per side.Top dimension is 8.5" D x 13" L.High performance dual HolsterTop paint and tool holder.Four rivets attach top to each rail.Double riveted slip-resistant Traction-Tred steps.Heavy-duty internal spreaders.All steps are knee-braced.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Design for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder

The D6210-1 fiberglass 12' D-rung straight ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces..Type IA duty rating D-rung straight ladder made of fiberglass.D-rung straight ladder is 144" L x 19" W with an approximate 16" fly width.Rated to hold up to 300 lbs..Exclusive Alflo rung joint means Twist-Proof performance.Pre-pierced holes for easy field installation of accessories.Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad.Molded rung braces on bottom step for increased durability.Mar-resistant molded end caps

The D6220-2 fiberglass 20' D-rung extension ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces..Type IA duty rating D-rung extension ladder made of fiberglass.D-rung extension ladder is 120" L x 19" W with an approximate 16" fly width.Rated to hold up to 300 lbs..Exclusive Alflo rung joint means Twist-Proof performance.Smooth operating pulley with polypropylene rope.Interlocking side rails, with internal rail guides on bottom of fly section, securely connect rails.External guides at top of base section securely interlock rails.Heavy-duty extruded rung locks are spring loaded to operate smoothly.Pre-pierced holes for easy field installation of accessories.Base and fly separate easily to use base section as single ladder.Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad.Molded rung braces on bottom step for increased durability.Mar-resistant molded end caps

The L6206 fiberglass 6' leaning ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. Double riveted slip-resistant Traction-Tred steps..Type IA duty rating leaning ladder made of fiberglass.Leaning ladder is 74.4" L x 24" W with an approximate 38" spread.Rated to hold up to 300 lbs..Top dimension is 7" D x 13" L.LEANSAFE Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity.Dropped rear rail pivot point gets ladder closer to your work.Color and branding differentiates LEANSAFE from standard step ladders.Rail latch, with single action opening and closing, locks the rear rail to the front rail to keep the ladder in leaning mode.Curved footpad on front feet maximize surface contact with the ground in both leaning mode and step ladder mode.Back-up plates reinforce all top connectors.Heavy-duty internal spreaders.Full set of rear horizontals spaced one per foot.EDGE360 bracing protects the ladder feet from every angle.Every rivet backed up by metal, metal plates, or washer to protect rails.Six-foot LEANSAFE leaning ladder inches step ladder mode has a maximum standing height of 3' 10" and a maximum reach height of 10'.Six-feet LEANSAFE leaning ladder inches leaning mode has a maximum standing height of 2' 10"s and a maximum reach height of 9'

The T6206 fiberglass 6' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 72" L x 23.4" W with an approximate 50.13" spread.Rated to hold up to 300 lbs. per side.Top dimension is 8.5" D x 13" L.High performance dual HolsterTop paint and tool holder.Four rivets attach top to each rail.Double riveted slip-resistant Traction-Tred steps.Heavy-duty internal spreaders.All steps are knee-braced.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Design for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder

The 6204 fiberglass 4' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 48" L x 19.92" W with an approximate 29" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety

The T6204 fiberglass 4' twin step ladder has a duty rating of 300 lbs. and features 3.125" front rails with 3.13" rear rails. Fiberglass rails are non-conductive for working near electricity..Twin step ladder made of fiberglass.Twin step ladder is 48" L x 19.92" W with an approximate 36.13" spread.Rated to hold up to 300 lbs. per side.Top dimension is 8.5" W x 13" L.High performance dual HolsterTop paint and tool holder.Four rivets attach top to each rail.Double riveted slip-resistant Traction-Tred steps.Heavy-duty internal spreaders.All steps are knee-braced.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Design for one or two-person jobs.Maximum load per side, including person and materials, shall not exceed duty rating of ladder

The 6205 fiberglass 5' step ladder has a duty rating of 300 lbs. and features 3" plastic steps with rubber pads. Fiberglass rails are non-conductive for working near electricity..Type IA duty rating step ladder made of fiberglass.Step ladder is 60" L x 21.6" W with an approximate 35.13" spread.Rated to hold up to 300 lbs..Top dimension is 5.75" D x 13" L.LOCKTOP with Lock-In System secures tools to increase productivity.Impact driver slot on the top safely holds the most frequently used tool by pros.Steel plate on the top helps expand storage space by allowing the use of magnetic accessories, such as lights and laser levels.Three-anchor points allow tools to be tethered to the top, preventing injuries and damages below from falling tools.The load capacity is molded into the top to create a permanent marking if labels are damaged.Lock-In System works with a full line of accessories, extending the usable space of the top.Fully braced steps provide maximum durability.EDGE bracing helps to protect the rails from damage.Wider base than code requires for firm stability provides maximum tip resistance.Weather resistant for outdoor use.Also available, optional manual pail shelf kit, Model PK76-9, and automatic closing pail shelf kit Model 76-2.ANSI and OSHA compliant for safety

The D6240-2 fiberglass 40' D-rung extension ladder has a duty rating of 300 lbs. and features 1.63" slip-resistant Traction-Tred D-rungs. Dual-action feet pivot for use on hard or penetrable surfaces..Type IA duty rating D-rung extension ladder made of fiberglass.D-rung extension ladder is 240" L x 19" W with an approximate 16" fly width.Rated to hold up to 300 lbs..Exclusive Alflo rung joint means Twist-Proof performance.Smooth operating pulley with polypropylene rope.Interlocking side rails, with internal rail guides on bottom of fly section, securely connect rails.Two sets of external guides at top of base section securely interlock rails.Heavy-duty extruded rung locks are spring loaded to operate smoothly.Pre-pierced holes for easy field installation of accessories.Base and fly separate easily to use base section as single ladder.Combination rail shield bracket and shoe with SHU-LOK and slip-resistant pad.Molded rung braces on bottom step for increased durability.Mar-resistant molded end caps

The P6208 fiberglass 8' platform ladder has a duty rating of 300 lbs. and features 3.125" front rails with 1.88" rear rails. A full set of rear horizontals are spaced one foot apart..Type IA duty rating reach height platform ladder made of fiberglass.Platform ladder is 120" L x 33.96" W with 14' reach height and an approximate 66.6" spread.Rated to hold up to 300 lbs..Platform is 14.6" D x 15" W.Safety guardrail encourages proper ladder use.Back-up plates reinforce all top connectors.Large platform provides secure and comfortable work area.Slip-resistant Traction-Tred steps are double riveted.Full set of rear horizontals spaced one foot apart.EDGE molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage.Slip-resistant foot pads attached to the EDGE structure.Every rivet backed up by metal, metal plates, or washers to protect rails.Internal aluminum spreaders