72" x 24" Table
104 results
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
With a high-pressure laminate top and sturdy fixed base, the Safco Rumba table is ready for anything you can throw at it. Perfect for training rooms, education environments, collaboration areas, open floor office plans, and conference rooms..Table with a fixed silver-tone metal base and 1" high-pressure laminate top in a fashion gray finish with a T-mold white edge band.Seating capacity: six people.Dimensions: 29"H x 72"W x 24"D.Equipped with post legs and glides.Perfect for training rooms, education environments, collaboration areas, open floor office plans, and conference rooms.10-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
With a high-pressure laminate top, folding and nesting capabilities, and dual-wheel casters, the Safco Rumba flip table is ready for anything you can throw at it. Use the ganging capabilities to extend a bank of tables and configure them into multiple styles to meet the needs of any workspace. The top folds down to easily nest together with other tables for compact storage when not in use. Features integrated cable management and mesh modesty panel. Perfect for training rooms, education environments, collaboration areas, open office plans, and conference rooms..Nesting table with a silver-tone metal base and 1" high-pressure laminate top in a fashion gray finish with white edge band.Dimensions: 29"H x 72"W x 24"D.Top folds down to easily nest together with other tables for compact storage when not in use.Features integrated cable management and black mesh modesty panel.Equipped with dual-wheel casters (two locking) for easy mobility.Perfect for training rooms, education environments, collaboration areas, open floor office plans, and conference rooms.10-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
The versatile Kobe Flip Top table offers features other tables don't. The top can be easily rotated 90 degrees allowing for convenient, space-saving storage and the locking casters make it easy to move. Choose from models with or without modesty panels. And, the durable 1" thick, laminate tops and steel frame provide exceptional durability..Unique nesting 72 x 24-inch Flip Top Table with Modesty Panel- Unlock the quick-release lever and flip down the entire tabletop to nest together when not in use.Matching black metal modesty panel provides kneespace privacy in open learning environments.Tabletop is constructed of a 1-inch thick thermal fused melamine laminate finished with a black T-Mold edge banding.Black tubular steel base has locking casters which makes the table mobile and is ideal for computer labs, training rooms, classrooms and more.Neo Walnut laminate tabletop is scratch, stain and scald resistant, wipes clean easily..10-Year Limited Manufacturer's Warranty.Set up a meeting room in a flash with Kobe Flip Top Tables. Unlock the quick-release lever and flip down the entire tabletop to nest together when not in use.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
The versatile Kobe Flip Top table offers features other tables don't. The top can be easily rotated 90 degrees allowing for convenient, space-saving storage and the locking casters make it easy to move. Choose from models with or without modesty panels. And, the durable 1" thick, laminate tops and steel frame provide exceptional durability..Unique nesting 72 x 24-inch Flip Top Table- Unlock the quick-release lever and flip down the entire tabletop to nest together when not in use.Tabletop is constructed of a 1-inch thick thermal fused melamine laminate finished with a black T-Mold edge banding.Rounded corners for improved safety.Black tubular steel base has locking casters which makes the table mobile and is ideal for computer labs, training rooms, classrooms and more.Noble Oak laminate tabletop is scratch, stain and scald resistant, wipes clean easily..10-Year Limited Manufacturer's Warranty.Set up a meeting room in a flash with Kobe Flip Top Tables. Unlock the quick-release lever and flip down the entire tabletop to nest together when not in use.
This freestanding table features two full-end panels and boasts a contemporary style..Table desk adds ample work space to your office.Harvest-finish laminate work surface for a contemporary look.Dimensions: 29"H x 72"W x 24"D.Clean contemporary styling designed with your needs in mind to provide years of practical solutions.Comes ready to assemble.Meets or exceeds BIFMA and GREENGUARD standards.Modesty panel provides valuable privacy below the work surface
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
FLIP-N-GO 24X72 NEPAL TEAK/BLK.Teak/black.Size: 24" x 72".Rectangular shape.Flip-N-Go series.Tables nest for compact storage
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads.Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts.Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets.MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
The versatile Kobe Flip Top table offers features other tables don't. The top can be easily rotated 90 degrees allowing for convenient, space-saving storage and the locking casters make it easy to move. Choose from models with or without modesty panels. And, the durable 1" thick, laminate tops and steel frame provide exceptional durability..Unique nesting 72 x 24-inch Flip Top Table with Modesty Panel- Unlock the quick-release lever and flip down the entire tabletop to nest together when not in use.Matching black metal modesty panel provides kneespace privacy in open learning environments.Tabletop is constructed of a 1-inch thick thermal fused melamine laminate finished with a black T-Mold edge banding.Black tubular steel base has locking casters which makes the table mobile and is ideal for computer labs, training rooms, classrooms and more.Noble Oak laminate tabletop is scratch, stain and scald resistant, wipes clean easily..10-Year Limited Manufacturer's Warranty.Set up a meeting room in a flash with Kobe Flip Top Tables. Unlock the quick-release lever and flip down the entire tabletop to nest together when not in use.
NPS BPFT Series features a 1.75" top & 2 grommet holes. Tables nest together for space saving storage. Tables are equipped with 4 casters (2 locking).Flip-N-Store, our Blow-molded Polyethylene Flipper Table, for use in training/conference room or seminar set-up.Speckled Gray Blow molded plastic & Steel.Seat Capacity: 6 seats.24x72x29.5.700 lb. Weight Capacity Evenly Distributed.ANSI/BIFMA Certified.Assembly Required.10 Year Warranty.National Public Seating Flip-N-Store, our Blow-molded Polyethylene Flipper Table, is a fantastic addition to any training/conference room or seminar set-up.
Basic Classroom Table: Our Basic Classroom Table is a heavy duty, fixed leg seated configuration. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. It is constructed with a steel frame that is designed with preconfigured holes and mounts to enable this basic table to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the back for a clean looking finish. Many of the public and private school systems enjoy this table because it can be used as a simple classroom table for general studies or set up for your most elaborate computer lab environment. Key Features: Fixed seated position /welded leg, ADA compliant, BIFMA Certified, Made in USA, Classroom activity table or computer lab furniture setup, LifeTime Warranty / Free Parts Program.Origin of Manufacturing: Versa Products USA Made in Los Angeles, California.Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing.Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees.Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents.Edging & Adhesives: Recycled semi flexible plastic T Moulding bumper edging & Water based non VOC adhesives.Casters & Feet Extra large, heavy duty ½” bolt size slider feet (1000 lb capacity) / Extra large, heavy duty casters with ½” threaded stem (600 lb each capacity each wheel).Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Revolution Classroom Desk: The Versa Tables Enclosed Revolution Classroom Desk name says it all! Sometimes the computer monitor can become a distraction or visual obstruction to the classroom instructor. This brilliant design rotates and hides away the monitor into a locked position when not in use, turning into a fully functioning desk. Versa Table's all steel frame construction will last for a LifeTime without lubrication. All pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor at almost 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24" can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. The fully enclosed sheet metal body design allows for a clean look within every training or office environment. This extremely sturdy desk has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. Each desk is designed with preconfigured holes and mounts to enable the stock desk to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the bottom. Many of the public and private school systems enjoy this table because it can be used as a classroom training workstation, instructor's desk or set up for a computer lab environment ..Rotating monitor surfaces.Enclosed sheet metal body.Lower cable management tray.BIFMA Certified.Made in USA.Classroom activity table or computer lab furniture setup.LifeTime Warranty / Free Parts Program.2 Keyboard trays.2 adjustable CPU holders
Revolution Classroom Desk: The Versa Tables Enclosed Revolution Classroom Desk name says it all! Sometimes the computer monitor can become a distraction or visual obstruction to the classroom instructor. This brilliant design rotates and hides away the monitor into a locked position when not in use, turning into a fully functioning desk. Versa Table's all steel frame construction will last for a LifeTime without lubrication. All pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor at almost 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24" can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. The fully enclosed sheet metal body design allows for a clean look within every training or office environment. This extremely sturdy desk has been manufactured for the past 20 years in our Los Angeles factory. These tables can be set up for computer training workstations with one or two users. Each desk is designed with preconfigured holes and mounts to enable the stock desk to transform into a computer classroom training table. It has mounts for CPU holders, keyboard arms, trays and an extensive variety of monitor mounting solutions. Every table includes a steel cable management support channel that runs along the bottom. Many of the public and private school systems enjoy this table because it can be used as a classroom training workstation, instructor's desk or set up for a computer lab environment ..Rotating monitor surfaces.Enclosed sheet metal body.2 Keyboard trays.2 adjustable CPU holders.Lower cable management tray.4 monitor capacity.BIFMA Certified.Made in USA.Classroom activity table or computer lab furniture setup.LifeTime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Cherry.Size: 24" x 72".Rectangular shape.Flip-N-Go series.Tables nest for compact storage
Pumice/black.Size: 24" x 72".Rectangular shape.Flip-N-Go series.Tables nest for compact storage
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.2 monitor capacity.1-2 users.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.2 monitor capacity.1-2 users.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Downview Adjustable Computer Table: The Versa Tables Downview Adjustable Computer Table is high quality with tempered glass and an adjustable leg. With a unique design that allows the monitor to be placed below the surface of the desk, our glare resistant tempered glass allows for privacy and a clear view. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust from a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. Call and speak to our Specialist for more details..Sub-surface monitor mount.Tinted tempered glass.Anti-glare.Scratch proof.Adjustable height 24” - 36” sitting or standing.2 monitor capacity.1-2 users.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program