Amp Professional Audio
9 resultsPyle Home PFA200 60-Watt Class-T Hi-Fi Audio Amp.12V AC/DC adapter.Class-T circuit design.Microphone input.Speaker imp: 2O–8O.3.5 mm aux input.Signal-to-noise ratio: >80dB.Total output power: 60W.Input power: 9V–14.4V, 2A DC.Total harmonic distortion:.Freq resp: 20Hz–20kHz.Short circuit, overload & overheat protection.Dim: 5.51"H x 4.8"W x 1.81"D
Now that wearing a mask is the established normal, being clearly heard is a constant struggle. Hamilton Buhl Amp-Up makes it easy to be heard without straining your voice. With its lightweight design, long battery life, and clear, crisp amplification, the amplifier is a winner and a must-have for teachers, coaches, receptionists, retail associates, pharmacists, and others. Hamilton Buhl Amp-Up has top-mounted button/dial controls, making it easy to adjust the sound volume, change to different modes, and turn the unit on and off. Hamilton Buhl Amp-Up boasts a multichannel feature that allows up to 40 different PA-25W devices to be paired and operated simultaneously near each other. The amplifier also has an auto pairing feature, which will automatically pair to an available channel to avoid interference when using multiple units. Using Bluetooth technology, you can stream audio/music content from your Bluetooth-enabled device. Also, play content from a USB/TF card or via the aux-in port..Personal UHF voice amplifier with wireless headworn microphone delivers voice amplification that's perfect for classrooms, conference rooms, small gatherings, and more.Output power: 25W maximum/15W rms.Powered by a built-in 7.4V/2000mAh lithium-ion battery with up to 11 hours of battery life.Frequency response: 90Hz-18KHz.Weight: 1.45 lbs..Dimensions: 4.8"H x 3.9"W x 1.9"D.Supports up to 40 devices paired/operated near each other, without any conflicts.Automatically pairs with an available channel to avoid interference.Features a durable and wear-resistant ABS plastic housing in black.Playback from any Bluetooth-enabled device, USB/TF card, or via the aux-in port.Supports a memory media card up to 32GB, which can store approximately 500 hours of voice data.Easy-to-read LCD screen.Comes with a UHF wireless headworn microphone, a carrying strap, and a waistband hook for hands-free use.1-year manufacturer limited warranty
The Gemini® professional power amplifier with limiter circuit switch for amp output protection has 2000 W IPP high power output to handle professional loudspeakers without clipping. This amplifier measuring 3.5" x 19" x 13.8" has front-to-rear airflow and cooling fan for thermal stability as well as reliability. Features 90 dB signal-to-noise ratio and 10 Hz - 50 kHz frequency response at 1.5 dB for improved performance. Amplifier with comprehensive front panel indicators has signaled, clip, protect and bridge for convenience. Amplifier features 5 way binding banana plug channel outputs, bridge control switch, ground lift switch and 3 speakon outputs for channels A/B/bridge for improved performance..Has 5 way binding banana plug channel output connections.Dimensions: 3.5"H x 19"W x 13.8"D.Delivers a power output of two 90 W RMS at 8 Ohm, two 125 W RMS at 4 Ohm, 250 W RMS at 8 Ohm and offers 0.77 V input sensitivity.With 20 k ohms input impedance and 21 dB V/9 V maximum input level, it has more than 90 dB S/N ratio at 10 Hz - 50 kHz frequency response.Offers high quality sound with 0.1% TDH and damping factor of more than 350 and has 5 mm x 20 mm fuse rated at 115/230 VAC, 50 - 60 Hz.Front to-rear airflow and cooling fan ensure thermal stability and reliability.Features XLR and 0.25" balanced jack connectors.Offers stereo and mono bridge configuration with better sound quality.Variable speed fan provides low noise operation with heat dissipation.Comprehensive front panel indicators including signal, clip, protect and bridge helps in user convenience.Has 3 speak-on outputs for channels A/B/bridge for improved performance.Has bridge control switch and ground lift switch for user convenience.Provides DC output protection and short circuit protection for safety.High power output helps to drive professional loudspeakers without clipping.Weight: 19.7 lbs..The Gemini® professional power amplifier with 2000 W high power output has DC output protection and short circuit protection. Has stereo and mono bridge for reliable operation.
The Pyle PTAU45 Compact Audio Amp with USB is ideal for powering any stereo system. Complete with USB, CD, and aux inputs and 2 x 120 watts of power, this simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality, this compact amp is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for the listener. Durable and affordable, this amp is made to last..120W x 2 max power.1/4" microphone input.1/4" headphone output.3.5mm aux CD/MP3 input.Aux 1, aux 2, CD & RCA inputs.USB reader function.110V–220V selector.Blue LED output level display.Bass, treble, balance, master, volume & microphone controls.Dim: 2.72"H x 8.27"W x 5.39"D
The Gemini® professional power amplifier with limiter circuit switch for amp output protection has 3000 W IPP high power output to handle professional loudspeakers without clipping. This amplifier measuring 3.5" x 19" x 13.8" has front-to-rear airflow and cooling fan for thermal stability as well as reliability. Features 95 dB signal-to-noise ratio and 10 Hz - 50 kHz frequency response at 1.5 dB for improved performance. Amplifier with comprehensive front panel indicators has signaled, clip, protect and bridge for convenience. Amplifier features 5 way binding banana plug channel outputs, bridge control switch, ground lift switch and 3 speakon outputs for channels A/B/bridge for improved performance..Has 5 way binding banana plug channel output connections.Dimensions: 3.5"H x 19"W x 13.8"D.Delivers a power output of two 150 W RMS at 8 Ohm, two 200 W RMS at 4 Ohm, 400 W RMS at 8 Ohm and offers 0.77 V input sensitivity.With 20 k ohms input impedance and 21 dB V/9 V maximum input level, it has more than 90 dB S/N ratio at 10 Hz - 50 kHz frequency response.Offers high quality sound with 0.1% TDH and damping factor of more than 350 and has 5 mm x 20 mm fuse rated at 115/230 VAC, 50 - 60 Hz.Front to-rear airflow and cooling fan ensure thermal stability and reliability.Features XLR and 0.25" balanced jack connectors.Offers stereo and mono bridge configuration with better sound quality.Variable speed fan provides low noise operation with heat dissipation.Comprehensive front panel indicators including signal, clip, protect and bridge helps in user convenience.Has 3 speak-on outputs for channels A/B/bridge for improved performance.Has bridge control switch and ground lift switch for user convenience.Provides DC output protection and short circuit protection for safety.High power output helps to drive professional loudspeakers without clipping.Weight: 19 lbs..The Gemini® professional power amplifier with 3000 W high power output has DC output protection and short circuit protection. Has stereo and mono bridge for reliable operation.
The Pyle 200-Watt Bluetooth Stereo Amp Receiver with USB & SD Card Readers is the perfect solution for all your audio needs. Using the latest sound amplification technology, this versatile system is designed to perform and deliver clear, accurate sound. It's loaded with plenty of audio playback options along with a wide range of device compatibility, so you can connect and play it all. The compact receiver features Bluetooth wireless streaming that works with all your favorite devices. Enjoy versatile and wireless audio streaming ability with this receiver..200W @ 4ohm max, 100W x 2 @ 8ohm RMS.Bluetooth.FM radio with LCD digital display.USB & SD Card readers.Freq resp: 20Hz–20kHz.Track/folder music search control knob.Microphone, aux & RCA inputs.Banana plug speaker & RCA outputs.Auto station scan with 60 presets.Front panel audio control center.Treble, bass, master & microphone volume adjustments.Repeat & random file functions.Dim: 3.9"H x 9.8"W x 9.8"D.Includes remote & FM antenna
The Gemini® professional power amplifier with limiter circuit switch for amp output protection has 5000 W IPP high power output to handle professional loudspeakers without clipping. This amplifier measuring 3.5" x 19" x 13.8" has front-to-rear airflow and cooling fan for thermal stability as well as reliability. Features 100 dB signal-to-noise ratio and 10 Hz - 50 kHz frequency response at 1.5 dB for improved performance. Amplifier with comprehensive front panel indicators has signaled, clip, protect and bridge for convenience. Amplifier features 5 way binding banana plug channel outputs, bridge control switch, ground lift switch and 3 speakon outputs for channels A/B/bridge for improved performance..Has 5 way binding banana plug channel output connections.Dimensions: 3.5"H x 19"W x 13.8"D.Delivers a power output of two 400 W RMS at 8 Ohm, two 550 W RMS at 4 Ohm, 1100 W RMS at 8 Ohm and offers 0.77 V input sensitivity.With 20 k ohms input impedance and 21 dB V/9 V maximum input level, it has more than 90 dB S/N ratio at 10 Hz - 50 kHz frequency response.Offers high quality sound with 0.1% TDH and damping factor of more than 350 and has 5 mm x 20 mm fuse rated at 115/230 VAC, 50 - 60 Hz.Front to-rear airflow and cooling fan ensure thermal stability and reliability.Features XLR and 0.25" balanced jack connectors.Offers stereo and mono bridge configuration with better sound quality.Variable speed fan provides low noise operation with heat dissipation.Comprehensive front panel indicators including signal, clip, protect and bridge helps in user convenience.Has 3 speak-on outputs for channels A/B/bridge for improved performance.Has bridge control switch and ground lift switch for user convenience.Provides DC output protection and short circuit protection for safety.High power output helps to drive professional loudspeakers without clipping.Weight: 26.8 lbs..The Gemini® professional power amplifier with 5000 W high power output has DC output protection and short circuit protection. Has stereo and mono bridge for reliable operation.
The Pyle PFA300 90 Watt Hi-Fi Stereo Class-T Amp is a small digital amplifier with up to 90 watts of power. Use it in your car, your RV, your golf cart or your home—anywhere you need a great amplifier with low distortion and acoustically accurate reproduction of music. Adjust the bass and treble to your liking, or bypass the included equalizer. It has a 3.5 mm stereo input and a stereo RCA. It is 2 ohm to 8 ohm speaker impedance compatible and comes with a 12-volt DC adapter..Total output power: 90 watts.Frequency response: 20 Hz to 20 kHz for acoustically accurate reproduction of music with low distortion.Speaker impedance: 2 ohms to 8 ohms.Signal-to-noise ratio: greater than 80 dB.Total harmonic distortion: less than 0.4%.Customizable sound with tone and direct switch; allows adjustment of how much bass and treble get through to be amplified; switching to direct removes filters from circuit so sound is amplified without any filtering.Supports various external devices with aux/RCA input, microphone input and aux input for karaoke.Crisp buttons and rotary knob controls for audio adjustment.Blue LED illuminated volume knob which also serves as a power indicator.Input power: 9 volts to 14.4 volts, 2 amps DC.Short circuit, overload, and overheat protection keep connected devices functioning properly and safely; built-in loudspeaker protection circuit protects speakers from high volume bursts of audio.Dim: 6.02 in. H x 4.96 in. W x 1.5 in. D.Includes 12-volt AC/DC adapter