AMP Receivers

The KENWOOD KAC-M1814 super-compact Max Power 400-Watt 4 Channel Class D Amp will add new clarity and impact to the basic powersports sound system of almost any kind of vehicle on land or water. Marine rated, this 4 channel amp will pump up your audio system with 45 watts RMS per channel—that's more than twice the power of most car stereos or marine receivers! The amp uses plastic covers to protect its connections and features a conformal coated circuit board that keeps out moisture and salt..400-Watt 4-Channel Class D Amp.Dimensions: 5.69"W x 1.75"H x 3.9"D.Universal Compatibility.Black, Plastic-covered connector helps to keep out water and dust.Weight: 4.95 lbs..Conformal-coated circuit board provides vibration resistance and helps prevent the PCB from rusting—ideal for marine applications.CTA-2006 compliant.Preamp and power amp sections are separated to reduce radiation noise.Low-pass and high-pass filters (50 Hz to 200 Hz, 12 dB per octave).Speaker-level input.Signal sensing turn-on.Ideal for cars, motorcycles, ATVs, and boats.400 watts max.45 watts RMS x 4 at 4 ohms.45 watts RMS x 4 at 2 ohms.90 watts RMS x 2 bridged at 4 ohms.Frequency response: 20 Hz to 20 kHz.Includes installed 30 amp ATM mini fuse, 9 in. speaker output harness (4-pin MOLEX plug on 1 end), 4 self-tapping screws (M4 x 16 mm), two 13.5 in. plastic wire ties, clear plastic self-adhesive protective covers for controls (1 sheet), and instruction manual/warranty card

The Pyle 200-Watt Bluetooth Stereo Amp Receiver with USB & SD Card Readers is the perfect solution for all your audio needs. Using the latest sound amplification technology, this versatile system is designed to perform and deliver clear, accurate sound. It's loaded with plenty of audio playback options along with a wide range of device compatibility, so you can connect and play it all. The compact receiver features Bluetooth wireless streaming that works with all your favorite devices. Enjoy versatile and wireless audio streaming ability with this receiver..200W @ 4ohm max, 100W x 2 @ 8ohm RMS.Bluetooth.FM radio with LCD digital display.USB & SD Card readers.Freq resp: 20Hz–20kHz.Track/folder music search control knob.Microphone, aux & RCA inputs.Banana plug speaker & RCA outputs.Auto station scan with 60 presets.Front panel audio control center.Treble, bass, master & microphone volume adjustments.Repeat & random file functions.Dim: 3.9"H x 9.8"W x 9.8"D.Includes remote & FM antenna

Ideal for home or office, you'll love this versatile, Compact Bluetooth Audio Stereo Receiver with FM Radio from Pyle! Bluetooth pairing is simple and hassle-free and is compatible with all of today's latest Bluetooth devices. Wireless range is up to 30 ft. This receiver also plays back MP3 audio files from flash drives and SD Cards, supporting up to 64GB..250W max.Freq resp: 20Hz–20kHz.Digital FM tuner with LCD.Front panel button control center.Audio source input mode selector.Connects to & plays audio from external devices.3.5mm headphone output with independent volume control.Two 1/4'' microphone inputs.Built-in microphone talk-over function (MIC1).MP3 digital audio file support.USB flash drive & SD Card readers (supports up to 64GB).USB port doubles as device charging port.3.5mm aux input.REC + subwoofer output: RCA (L/R) connectors.Audio input: RCA (L/R) connectors.Push-type speaker connectors.Short circuit & overvoltage protection.Includes remote

Pyle® 1000 Watt power amplifier has fault LEDs that illuminate when the amplifier is aware of any problems. Amplifier also features signal activity LEDs that illuminates when the output signal level exceeds 1 volt..Two channels A/B-bridgeable.Inputs: Electronic balanced; barrier strip, xLR, TRS 1/4".Speaker terminal: Speakons for Ch A, Ch B and bridge; binding post.Cooling fan two-speed DC fan, air flow back to front.110 -220 V switchable.2 x 5 LED indicator red, DDT/cipping; yellow, signal; green, power.Overload and protection indicator.Signal/noise ratio: 102 dB, Distortion: 1.0percent.Frequency response: 20Hz to 20 KHz >+or-0.5dB.Input impedance: balance 20Khz, input level: +4 dB.Warranty: 1 year.Pyle® 1000 Watt power amplifier has a built in fan cooling system to disperse heat and allow ideal operation.

Pyle Home PFA200 60-Watt Class-T Hi-Fi Audio Amp.12V AC/DC adapter.Class-T circuit design.Microphone input.Speaker imp: 2O–8O.3.5 mm aux input.Signal-to-noise ratio: >80dB.Total output power: 60W.Input power: 9V–14.4V, 2A DC.Total harmonic distortion:.Freq resp: 20Hz–20kHz.Short circuit, overload & overheat protection.Dim: 5.51"H x 4.8"W x 1.81"D

The Pyle Digital Home Theater Bluetooth Stereo Receiver brings music to any room with crystal clear clarity. This system features Bluetooth wireless music streaming ability. You will be able to wirelessly, and instantly, stream your audio through this 4-channel high-power system, which powers up to 4 speakers. System features include AM/FM radio, USB and SD Card readers for MP3 digital audio file playback, aux input to connect external devices like smartphones and tablets, 2 1/4 in. microphone input jacks and RCA audio inputs and outputs. Connect some microphones for a karaoke party and adjust the volume, balance, treble and bass on the master output for total control of your sound. The system also includes AM/FM antennas, remote control and audio connection cable..4-channel Receiver.300w Output.Freq Resp: 20Hz-20kHz.Imp: 8OHM.Bluetooth® Version 3.0.Am/fm Radio.Digital LCD Display.Usb, SD™ Card, Aux, 2 X 1/4" Microphone & 2 X RCA Inputs.2 X RCA Outputs.Compatible With Mp3, Wma & Wav File Types.4 X Speaker Terminal Binding Posts.Compatible With External Mobile Devices.Auto Scan & Tuning Control.50 Radio Memory Prests.Built-in Ventilation Cooling Fan

Jensen® System with receiver and remote features random play and programmable memory. System remote requires 2 AAA batteries..Vertical-loading CD player Compatible with CD-R/RW compatible.Multifunction blue backlit LCD display.AM/FM stereo receiver with digital display.Alarm clock.Skip/search forward and backward.Random play.Programmable memory.Stereo speaker system.Stereo headphone jack.Power: 2 x 1 W x 2 RMS.Power: 120 VAC at 60 Hz.Dimensions: 7"(H) x 18.88"(W) x 2.38"(D).Aux input for connecting iPod®, MP3 or other digital audio players.Repeat 1 or all.Includes wall mount kit and remote.Weight: 4.95 lbs..WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and/or phthalates, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGs.ca.gov..Jensen® System with receiver and remote has a multifunction blue backlit LCD display and AM/FM stereo receiver with digital display.

The Cerwin-Vega Mobile Performance Series of products makes owning a Cerwin-Vega Mobile sound system very affordable for those that are budget-conscious. And with this 1,600 Watt Max 4 Channel Class D Amp, you can enjoy the LOUD sound experience at the right price and the right power! Cerwin-Vega Mobile amplifiers are powerful enough to drive even the most inefficient speakers and bring out its full performance capabilities to dramatic levels of clean, distortion-free sound. All Cerwin-Vega Mobile amplifiers are tested and validated by an outside third-party audio lab that measures and analyzes audio electronics to ensure precise power measurements and follows standards and practices set forth by CTA (Consumer Technology Association)..200 watts x 4 channels at 2 ohms RMS.125 watts x 4 channels at 4 ohms RMS.2 ohm stereo, 4 ohm bridged full range operation.Frequency response: 10 Hz to 32 kHz.Direct short, thermal, and overload circuits protect amplifier.RCA passthrough output for easy system expansion.Variable 12 dB high, low, and subsonic crossovers.Handles 200 millivolts to 6 volts high- and low-level inputs.Dimensions: 11.81 in. L x 9.38 in. D x 2.25 in. H

The Gemini® professional power amplifier with limiter circuit switch for amp output protection has 3000 W IPP high power output to handle professional loudspeakers without clipping. This amplifier measuring 3.5" x 19" x 13.8" has front-to-rear airflow and cooling fan for thermal stability as well as reliability. Features 95 dB signal-to-noise ratio and 10 Hz - 50 kHz frequency response at 1.5 dB for improved performance. Amplifier with comprehensive front panel indicators has signaled, clip, protect and bridge for convenience. Amplifier features 5 way binding banana plug channel outputs, bridge control switch, ground lift switch and 3 speakon outputs for channels A/B/bridge for improved performance..Has 5 way binding banana plug channel output connections.Dimensions: 3.5"H x 19"W x 13.8"D.Delivers a power output of two 150 W RMS at 8 Ohm, two 200 W RMS at 4 Ohm, 400 W RMS at 8 Ohm and offers 0.77 V input sensitivity.With 20 k ohms input impedance and 21 dB V/9 V maximum input level, it has more than 90 dB S/N ratio at 10 Hz - 50 kHz frequency response.Offers high quality sound with 0.1% TDH and damping factor of more than 350 and has 5 mm x 20 mm fuse rated at 115/230 VAC, 50 - 60 Hz.Front to-rear airflow and cooling fan ensure thermal stability and reliability.Features XLR and 0.25" balanced jack connectors.Offers stereo and mono bridge configuration with better sound quality.Variable speed fan provides low noise operation with heat dissipation.Comprehensive front panel indicators including signal, clip, protect and bridge helps in user convenience.Has 3 speak-on outputs for channels A/B/bridge for improved performance.Has bridge control switch and ground lift switch for user convenience.Provides DC output protection and short circuit protection for safety.High power output helps to drive professional loudspeakers without clipping.Weight: 19 lbs..The Gemini® professional power amplifier with 3000 W high power output has DC output protection and short circuit protection. Has stereo and mono bridge for reliable operation.

The CDi Series amplifiers are professional tools designed and built for installed sound applications. Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs. Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. Up to 20 user-defined DSP presets are available..Two-channel power amplifier is a professional tool designed and built for installed sound applications.70Vrms/140Vrms outputs.Accurate, uncolored sound with very low distortion for the best in music and voice reproduction.Onboard digital signal processing (DSP) includes crossovers, EQ filters, delay, and output limiting.Features intuitive front-panel LCD screen for quick, easy configuration.Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads, and internal faults.Switch-mode universal power supply

Give your home’s soundtrack a boost. The Bose Music Amplifier powers up to two pairs of passive speakers with 125 watts per channel and connects over Wi-Fi so you can stream all your favorites, from playlists to podcasts, easily from your phone. To elevate your sound experience, pair the amp with Bose in-ceiling or outdoor speakers and custom EQ will deliver clear, well-balanced sound. Enjoy the simplicity of controlling your music with the Bose Music app, or stream content your way via Bluetooth, Apple Airplay 2, Spotify Connect, and Chromecast built-in. For more music throughout your home, group the amp with other Wi-Fi -enabled Bose products. SimpleSync technology lets you pair it with a compatible Bose headphone or Bluetooth speakers for private listening or more sound. When it comes to your record player, connect easily for maximum enjoyment of your vinyl collection or allow guests to take over the vibe by pairing via Bluetooth..Audio Amplifier Commonly used for enhancing sound in home audio systems.Connect everything from speakers, to TVs and CD players, then use the Bose Music app to adjust audio or control music..USB or optical inputs, depending on the specific model..Audio control for bass and treble adjustments..SimpleSync connectivity.EQ control for select Bose speakers.Stereo and mono settings.Wi-Fi and ethernet connectivity.Compatible app: Bose Music app.Outputs: Ethernet, Analog, Bass, Two sets of speakers.Inputs: Power, Ethernet, Analog, Optical, USB (Service only)

The Gemini® professional power amplifier with limiter circuit switch for amp output protection has 2000 W IPP high power output to handle professional loudspeakers without clipping. This amplifier measuring 3.5" x 19" x 13.8" has front-to-rear airflow and cooling fan for thermal stability as well as reliability. Features 90 dB signal-to-noise ratio and 10 Hz - 50 kHz frequency response at 1.5 dB for improved performance. Amplifier with comprehensive front panel indicators has signaled, clip, protect and bridge for convenience. Amplifier features 5 way binding banana plug channel outputs, bridge control switch, ground lift switch and 3 speakon outputs for channels A/B/bridge for improved performance..Has 5 way binding banana plug channel output connections.Dimensions: 3.5"H x 19"W x 13.8"D.Delivers a power output of two 90 W RMS at 8 Ohm, two 125 W RMS at 4 Ohm, 250 W RMS at 8 Ohm and offers 0.77 V input sensitivity.With 20 k ohms input impedance and 21 dB V/9 V maximum input level, it has more than 90 dB S/N ratio at 10 Hz - 50 kHz frequency response.Offers high quality sound with 0.1% TDH and damping factor of more than 350 and has 5 mm x 20 mm fuse rated at 115/230 VAC, 50 - 60 Hz.Front to-rear airflow and cooling fan ensure thermal stability and reliability.Features XLR and 0.25" balanced jack connectors.Offers stereo and mono bridge configuration with better sound quality.Variable speed fan provides low noise operation with heat dissipation.Comprehensive front panel indicators including signal, clip, protect and bridge helps in user convenience.Has 3 speak-on outputs for channels A/B/bridge for improved performance.Has bridge control switch and ground lift switch for user convenience.Provides DC output protection and short circuit protection for safety.High power output helps to drive professional loudspeakers without clipping.Weight: 19.7 lbs..The Gemini® professional power amplifier with 2000 W high power output has DC output protection and short circuit protection. Has stereo and mono bridge for reliable operation.

The Gemini® professional power amplifier with limiter circuit switch for amp output protection has 5000 W IPP high power output to handle professional loudspeakers without clipping. This amplifier measuring 3.5" x 19" x 13.8" has front-to-rear airflow and cooling fan for thermal stability as well as reliability. Features 100 dB signal-to-noise ratio and 10 Hz - 50 kHz frequency response at 1.5 dB for improved performance. Amplifier with comprehensive front panel indicators has signaled, clip, protect and bridge for convenience. Amplifier features 5 way binding banana plug channel outputs, bridge control switch, ground lift switch and 3 speakon outputs for channels A/B/bridge for improved performance..Has 5 way binding banana plug channel output connections.Dimensions: 3.5"H x 19"W x 13.8"D.Delivers a power output of two 400 W RMS at 8 Ohm, two 550 W RMS at 4 Ohm, 1100 W RMS at 8 Ohm and offers 0.77 V input sensitivity.With 20 k ohms input impedance and 21 dB V/9 V maximum input level, it has more than 90 dB S/N ratio at 10 Hz - 50 kHz frequency response.Offers high quality sound with 0.1% TDH and damping factor of more than 350 and has 5 mm x 20 mm fuse rated at 115/230 VAC, 50 - 60 Hz.Front to-rear airflow and cooling fan ensure thermal stability and reliability.Features XLR and 0.25" balanced jack connectors.Offers stereo and mono bridge configuration with better sound quality.Variable speed fan provides low noise operation with heat dissipation.Comprehensive front panel indicators including signal, clip, protect and bridge helps in user convenience.Has 3 speak-on outputs for channels A/B/bridge for improved performance.Has bridge control switch and ground lift switch for user convenience.Provides DC output protection and short circuit protection for safety.High power output helps to drive professional loudspeakers without clipping.Weight: 26.8 lbs..The Gemini® professional power amplifier with 5000 W high power output has DC output protection and short circuit protection. Has stereo and mono bridge for reliable operation.

The Crown 135MA is a high-value mixer-amplifier for commercial audio, providing an 8-ohm resistance and a constant-voltage output of 70V/100V. Typical uses are paging, background music, and music on hold. The 135MA provides three inputs (each with a volume control) and a 35W amplifier output. Other features include priority muting, voice-activated muting, phantom power, and bass and treble controls..High-value mixer-amplifier for commercial audio.Provides three inputs (each with a volume control) and one 35W amplifier output channel.Bass and treble controls on the master output.Balanced phoenix-type mic/line input, telephone output, dual RCA stereo music inputs, and screw terminal speaker output (these are connections too).Priority muting by VOX or external switch.Perfect for paging, background music, and music on hold.3-year manufacturer limited warranty

The DSi 2.0 amplifier family, JBL's first line of dedicated cinema amplifiers, builds on Crown DSI Digital Screen Array amplifier technology, integrating best-in-class DSP from Crown's flagship CDi DriveCore series to deliver potent, cost-effective amplification for JBL's entire range of cinema loudspeakers. Choose from three power configurations, available in analog and analog-plus-digital "D" versions featuring Dante/AES67 connectivity..A professional wired PA system in the form of a rackmount cinema amplifier designed specifically for JBL loudspeakers..Delivers up to 700 watts per channel across four channels, ensuring powerful and consistent sound reinforcement..Engineered to cover large cinema auditoriums with optimized presets that match JBL cinema speaker performance..Operates on standard AC mains (100–240V, 50/60Hz) with redundant hot‑swappable power supplies for reliability..Provides analog audio inputs, Dante/AES67 digital networking, and balanced outputs for seamless loudspeaker integration..Offers a wide 20Hz–20kHz response with DSP tuning to deliver clear, accurate, and cinema‑optimized audio..Features front‑panel controls, remote DSP software management, and network‑based adjustment for flexible operation..Weighs approximately 27.5 pounds (12.5 kilograms), making it sturdy yet manageable for rack installation..Compact 1U rackmount size measuring 1.72 × 17.2 × 20.3 inches for efficient space usage..3 Years Limited Warranty

The DriveCore Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi series amplifiers are designed, engineered and manufactured to the industry's highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology. This amplifier is EN 54-16 compliant for life safety applications..Two-channel power amplifier with BLU Link is versatile, compact and highly energy-efficient.Features GPIO, AUX, Ethernet, and BLU Link In and Out ports.With digital audio transport via HARMAN's proprietary BLU Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage - at a much lower cost.Better monitoring, control and audio manipulation with the HiQnet protocol that's over standard TCP/IP; remotely see how all networked DCi amplifiers are performing and control them as needed.In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.Meets or exceeds the EN 54-16 standard.3-year manufacturer limited warranty