ANSI Gloves
193 results
Ansell Scorpio Large gloves in green color feature specially designed neoprene construction for safety and comfort. Gloves with gauntlet cuff are snug fit and ideal for industrial or warehouse works..Coated gloves.Neoprene.Large.Green.12 pairs.Cuff Gauntlet.12"(L).Bulk chemical handling and transport finishing, cleaning and de-greasing, handling alkalies and salts, handling oils, acids, caustics and alcohols, handling specialty chemicals.Straight thumb.Heavy-duty protection against a wide range of chemicals.Immersion usage segment.Cotton two-piece lining eliminates seams that can cause hand irritation and premature wear-through.Knit lined for comfort and easy donning and doffing.Rough finish grip design.ANSI 3, ANSI 1, EN388-3121.Weight: 0.35 lbs..Neoprene coated gloves with gauntlet cuff.Size 9.Specially designed neoprene construction provides a snug fit.Dipped rough finish makes handling wet, slippery materials easier and safer.Great for use when handling chemicals, oils, acids, solvents and caustics.Industrial and warehouse work gloves for many applications.
Ansell HyFlex Large coated gloves in white/gray color are foam nitrile coated and offer good grip in dry environments. Gloves reduce user fatigue and are ideal for industrial or warehouse work..Channels oil away from glove surface for sure grip in light oil.Foam nitrile.Exceptional comfort and fit increases worker acceptance and safety compliance.Foam coated gloves with kint-wrist cuff.X-large.Exceptional, unmatched comfort for workers.Glove molds naturally to the hand, minimizing fatigue.Provides good grip in dry environments.Multipurpose gloves.Available in white/gray.12 Pairs.Electrical component assembly and installation, final assembly areas, general material handling, shipping and receiving - handling cartons and packaging, truck driving, forklift and crane operation.Straight thumb.Ergonomic form-fitting liner design and provides good protection from nuisance nicks and abrasion.Smooth finish grip type.ANSI 3, ANSI 1, EN388-3131.Weight: 0.1 lbs..Industrial and warehouse work gloves for many applications.
7551 S Orange ANSI A5 Coated Waterproof CR Gloves.THERMAL PROTECTION - 13g HPPE with a soft 10g brushed acrylic fleece liner for comfort and warmth.CUT RESISTANT - ANSI A5 cut protection.WATERPROOF - Fully coated latex protects hands from water and cold air.SUPERIOR GRIP - Sandy, nitrile-dipped palm for secure gripping.DEXTERITY - Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED - Meets EN 388: 4X43E.MACHINE WASHABLE
CUT RESISTANT – EN388 Level 5, ANSI Level A4 cut protection.BREATHABLE COMFORT – TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.SEAMLESS KNIT CUFF – Fits comfortably snug to wrist and prevents debris from getting inside glove.FDA APPROVED FOR NO CONTAMINATION – Tested & approved to FDA CFR 175.300 for total extractive residues, certifying no food contamination during prepping, packaging, transporting and other process points.HI-VIS COLOR – For enhanced visibility and safety.MACHINE WASHABLE
THERMAL PROTECTION - 13g HPPE with a soft 10g brushed acrylic fleece liner for comfort and warmth.CUT RESISTANT - ANSI A5 cut protection.WATERPROOF - Fully coated latex protects hands from water and cold air.SUPERIOR GRIP - Sandy, nitrile-dipped palm for secure gripping.DEXTERITY - Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED - Meets EN 388: 4X43E.MACHINE WASHABLE
Ansell X-Large Latex coated gloves in yellow color come with cotton flock lining and offer high degree of tensile strength. Gloves feature fishscale design for grip on wet or dry objects and are ideal for industrial or warehouse works..Size: X-Large.Natural latex provides a high degree of tensile strength.Latex gloves with pinked cuff.Size 10.12 Pair/Box.Cotton flock lining helps maintain excellent sensitivity.Provides snag, puncture and abrasion protection.Fishscale design provides grip on wet or dry objects.Natural rubber latex.X-large.12"(L) x 0.194"(W).Agriculture, food processing, janitorial.Cotton flock lining, chemical-resistance.Immersion usage segment.ANSI 2, ANSI 0, EN388-1110, FDA approved.Weight: 0.19 lbs..Industrial and warehouse work gloves for many applications.
THERMAL PROTECTION - 13g HPPE with a soft 10g brushed acrylic fleece liner for comfort and warmth.CUT RESISTANT - ANSI A5 cut protection.WATERPROOF - Fully coated latex protects hands from water and cold air.SUPERIOR GRIP - Sandy, nitrile-dipped palm for secure gripping.DEXTERITY - Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED - Meets EN 388: 4X43E.MACHINE WASHABLE
CUT RESISTANT – EN388 Level 5, ANSI Level A4 cut protection.BREATHABLE COMFORT – TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.SEAMLESS KNIT CUFF – Fits comfortably snug to wrist and prevents debris from getting inside glove.FDA APPROVED FOR NO CONTAMINATION – Tested & approved to FDA CFR 175.300 for total extractive residues, certifying no food contamination during prepping, packaging, transporting and other process points.HI-VIS COLOR – For enhanced visibility and safety.MACHINE WASHABLE
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A7 cut protection and level 5 abrasion resistance for heavy-duty protection around extremely sharp materials.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge seamless aramid fiber knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A7 cut resistant, EN388: 4X42F, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7551 XL Orange ANSI A5 Coated Waterproof CR Gloves.THERMAL PROTECTION - 13g HPPE with a soft 10g brushed acrylic fleece liner for comfort and warmth.CUT RESISTANT - ANSI A5 cut protection.WATERPROOF - Fully coated latex protects hands from water and cold air.SUPERIOR GRIP - Sandy, nitrile-dipped palm for secure gripping.DEXTERITY - Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED - Meets EN 388: 4X43E.MACHINE WASHABLE
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A7 cut protection and level 5 abrasion resistance for heavy-duty protection around extremely sharp materials.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge seamless aramid fiber knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A7 cut resistant, EN388: 4X42F, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
THERMAL PROTECTION - 13g HPPE with a soft 10g brushed acrylic fleece liner for comfort and warmth.CUT RESISTANT - ANSI A5 cut protection.WATERPROOF - Fully coated latex protects hands from water and cold air.SUPERIOR GRIP - Sandy, nitrile-dipped palm for secure gripping.DEXTERITY - Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED - Meets EN 388: 4X43E.MACHINE WASHABLE
CUT RESISTANT – EN388 Level 5, ANSI Level A4 cut protection.BREATHABLE COMFORT – TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.SEAMLESS KNIT CUFF – Fits comfortably snug to wrist and prevents debris from getting inside glove.FDA APPROVED FOR NO CONTAMINATION – Tested & approved to FDA CFR 175.300 for total extractive residues, certifying no food contamination during prepping, packaging, transporting and other process points.HI-VIS COLOR – For enhanced visibility and safety.MACHINE WASHABLE
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A7 cut protection and level 5 abrasion resistance for heavy-duty protection around extremely sharp materials.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge seamless aramid fiber knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A7 cut resistant, EN388: 4X42F, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A7 cut protection and level 5 abrasion resistance for heavy-duty protection around extremely sharp materials.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge seamless aramid fiber knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A7 cut resistant, EN388: 4X42F, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
CUT RESISTANT – EN388 Level 5, ANSI Level A4 cut protection.BREATHABLE COMFORT – TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.SEAMLESS KNIT CUFF – Fits comfortably snug to wrist and prevents debris from getting inside glove.FDA APPROVED FOR NO CONTAMINATION – Tested & approved to FDA CFR 175.300 for total extractive residues, certifying no food contamination during prepping, packaging, transporting and other process points.HI-VIS COLOR – For enhanced visibility and safety.MACHINE WASHABLE
7551 L Orange ANSI A5 Coated Waterproof CR Gloves.THERMAL PROTECTION - 13g HPPE with a soft 10g brushed acrylic fleece liner for comfort and warmth.CUT RESISTANT - ANSI A5 cut protection.WATERPROOF - Fully coated latex protects hands from water and cold air.SUPERIOR GRIP - Sandy, nitrile-dipped palm for secure gripping.DEXTERITY - Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED - Meets EN 388: 4X43E.MACHINE WASHABLE
CUT RESISTANT – EN388 Level 5, ANSI Level A4 cut protection.BREATHABLE COMFORT – TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.SEAMLESS KNIT CUFF – Fits comfortably snug to wrist and prevents debris from getting inside glove.FDA APPROVED FOR NO CONTAMINATION – Tested & approved to FDA CFR 175.300 for total extractive residues, certifying no food contamination during prepping, packaging, transporting and other process points.HI-VIS COLOR – For enhanced visibility and safety.MACHINE WASHABLE
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A7 cut protection and level 5 abrasion resistance for heavy-duty protection around extremely sharp materials.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge seamless aramid fiber knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A7 cut resistant, EN388: 4X42F, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
THERMAL PROTECTION - 13g HPPE with a soft 10g brushed acrylic fleece liner for comfort and warmth.CUT RESISTANT - ANSI A5 cut protection.WATERPROOF - Fully coated latex protects hands from water and cold air.SUPERIOR GRIP - Sandy, nitrile-dipped palm for secure gripping.DEXTERITY - Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED - Meets EN 388: 4X43E.MACHINE WASHABLE
CUT RESISTANT – EN388 Level 5, ANSI Level A4 cut protection.BREATHABLE COMFORT – TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.SEAMLESS KNIT CUFF – Fits comfortably snug to wrist and prevents debris from getting inside glove.FDA APPROVED FOR NO CONTAMINATION – Tested & approved to FDA CFR 175.300 for total extractive residues, certifying no food contamination during prepping, packaging, transporting and other process points.HI-VIS COLOR – For enhanced visibility and safety.MACHINE WASHABLE
CUT RESISTANT – EN388 Level 5, ANSI Level A4 cut protection.BREATHABLE COMFORT – TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.SEAMLESS KNIT CUFF – Fits comfortably snug to wrist and prevents debris from getting inside glove.FDA APPROVED FOR NO CONTAMINATION – Tested & approved to FDA CFR 175.300 for total extractive residues, certifying no food contamination during prepping, packaging, transporting and other process points.HI-VIS COLOR – For enhanced visibility and safety.MACHINE WASHABLE
7551 2XL Orange ANSI A5 Coated Waterproof CR Gloves.THERMAL PROTECTION - 13g HPPE with a soft 10g brushed acrylic fleece liner for comfort and warmth.CUT RESISTANT - ANSI A5 cut protection.WATERPROOF - Fully coated latex protects hands from water and cold air.SUPERIOR GRIP - Sandy, nitrile-dipped palm for secure gripping.DEXTERITY - Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED - Meets EN 388: 4X43E.MACHINE WASHABLE
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A7 cut protection and level 5 abrasion resistance for heavy-duty protection around extremely sharp materials.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge seamless aramid fiber knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A7 cut resistant, EN388: 4X42F, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7551 M Orange ANSI A5 Coated Waterproof CR Gloves.THERMAL PROTECTION - 13g HPPE with a soft 10g brushed acrylic fleece liner for comfort and warmth.CUT RESISTANT - ANSI A5 cut protection.WATERPROOF - Fully coated latex protects hands from water and cold air.SUPERIOR GRIP - Sandy, nitrile-dipped palm for secure gripping.DEXTERITY - Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED - Meets EN 388: 4X43E.MACHINE WASHABLE
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A7 cut protection and level 5 abrasion resistance for heavy-duty protection around extremely sharp materials.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge seamless aramid fiber knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A7 cut resistant, EN388: 4X42F, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
Ansell® HyFlex® X-Small coated gloves in white/gray color are foam nitrile coated and offer good grip in dry environments. Gloves reduce user fatigue and are ideal for industrial or warehouse work..Size: X-Small.Available in white/gray.Channels oil away from glove surface for sure grip in light oil.Exceptional, unmatched comfort for workers.Foam coated gloves with knit-wrist cuff.Size 7.12 Pair/Box.Provides good grip in dry environments.Glove molds naturally to the hand, minimizing fatigue.Exceptional comfort and fit increases worker acceptance and safety compliance.Multipurpose gloves.Foam nitrile.Electrical component assembly and installation, final assembly areas, general material handling, shipping and receiving - handling cartons and packaging, truck driving, forklift and crane operation.Straight thumb.Coating Palm coated.Ergonomic form-fitting liner design and provides good protection from nuisance nicks and abrasion.Increases worker acceptance and safety compliance.Smooth finish grip type.ANSI 3, ANSI 1, EN388-3131.Weight: 0.09 lbs..Industrial and warehouse work gloves for many applications.
THERMAL PROTECTION - 13g HPPE with a soft 10g brushed acrylic fleece liner for comfort and warmth.CUT RESISTANT - ANSI A5 cut protection.WATERPROOF - Fully coated latex protects hands from water and cold air.SUPERIOR GRIP - Sandy, nitrile-dipped palm for secure gripping.DEXTERITY - Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED - Meets EN 388: 4X43E.MACHINE WASHABLE
CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A7 cut protection and level 5 abrasion resistance for heavy-duty protection around extremely sharp materials.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge seamless aramid fiber knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A7 cut resistant, EN388: 4X42F, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
CUT RESISTANT – EN388 Level 5, ANSI Level A4 cut protection.BREATHABLE COMFORT – TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.SEAMLESS KNIT CUFF – Fits comfortably snug to wrist and prevents debris from getting inside glove.FDA APPROVED FOR NO CONTAMINATION – Tested & approved to FDA CFR 175.300 for total extractive residues, certifying no food contamination during prepping, packaging, transporting and other process points.HI-VIS COLOR – For enhanced visibility and safety.MACHINE WASHABLE
CUT RESISTANT – EN388 Level 5, ANSI Level A4 cut protection.BREATHABLE COMFORT – TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.SEAMLESS KNIT CUFF – Fits comfortably snug to wrist and prevents debris from getting inside glove.FDA APPROVED FOR NO CONTAMINATION – Tested & approved to FDA CFR 175.300 for total extractive residues, certifying no food contamination during prepping, packaging, transporting and other process points.HI-VIS COLOR – For enhanced visibility and safety.MACHINE WASHABLE
CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7042 S Green ANSI A4 Nitrile Coated CR Gloves.HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A7 cut protection and level 5 abrasion resistance for heavy-duty protection around extremely sharp materials.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge seamless aramid fiber knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A7 cut resistant, EN388: 4X42F, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A7 cut protection and level 5 abrasion resistance for heavy-duty protection around extremely sharp materials.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge seamless aramid fiber knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A7 cut resistant, EN388: 4X42F, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7001 S Black Nitrile Coated Gloves.ABRASION RESISTANT – ANSI level 3 abrasion resistance for durable protection when working with rough materials.STRONG NO-SLIP GRIP – Durable DSX nitrile coated palms for optimal grip with dry surfaces and materials.SUPERIOR FIT, FEEL & DEXTERITY – 18-gauge seamless nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant, EN388: 4121X.MACHINE WASHABLE
CUT RESISTANT – EN388 Level 5, ANSI Level A4 cut protection.BREATHABLE COMFORT – TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.SEAMLESS KNIT CUFF – Fits comfortably snug to wrist and prevents debris from getting inside glove.FDA APPROVED FOR NO CONTAMINATION – Tested & approved to FDA CFR 175.300 for total extractive residues, certifying no food contamination during prepping, packaging, transporting and other process points.HI-VIS COLOR – For enhanced visibility and safety.MACHINE WASHABLE
The Ergodyne ProFlex 7031 nitrile-coated cut-resistant gloves are designed to provide durability and grip in all conditions, wet or dry. The 13-gauge A3 cut protection liner is cut-, puncture-, and abrasion-resistant for the toughest environments. The reinforced thumb dip adds extra protection in a high-wear area. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The sandy nitrile dip provides an excellent grip for all conditions. These protective gloves are made from 13-gauge yarn that provides level 3 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. The Ergodyne ProFlex 7031 A3 nitrile-coated gloves are perfect for workers in construction, manufacturing, fabrication, service technicians, and material handling..CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE.Sandy nitrile dip provides an excellent grip for all conditions.Features ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A3, EN 420:2003+A1:2009, EN 388:2016 4X42C standards.Care instructions: machine-washable
7000 S Gray Nitrile-Coated Gloves Microfoam Palm.ABRASION RESISTANT - ANSI level 5 abrasion resistance for protection when working with rough materials.FLEXIBLE NO-SLIP GRIP - Microfoam nitrile coated palms provide excellent grip, dexterity and feel for all-purpose handling on a variety of surfaces.LIGHTWEIGHT FORM FIT - 15-gauge seamless nylon-spandex knit with microfoam nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS - Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED - ANSI level 5 abrasion resistant, EN 388: 4121A, ANSI A1 cut resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
7021 S Lime Hi-Vis Nitrile Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant
7042 XL Green ANSI A4 Nitrile Coated CR Gloves.HEAT RESISTANT – Aramid fiber meets EN407 level 1 contact heat resistance for safety when working with high temperature materials.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection around sharp objects.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless aramid fiber knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – EN407 level 1 contact heat resistant, ANSI A4 cut resistant, EN 388: 4X41D, ANSI level 4 abrasion resistant, ANSI level 2 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing
The Ergodyne ProFlex 7031 nitrile-coated cut-resistant gloves are designed to provide durability and grip in all conditions, wet or dry. The 13-gauge A3 cut protection liner is cut-, puncture-, and abrasion-resistant for the toughest environments. The reinforced thumb dip adds extra protection in a high-wear area. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The sandy nitrile dip provides an excellent grip for all conditions. These protective gloves are made from 13-gauge yarn that provides level 3 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. The Ergodyne ProFlex 7031 A3 nitrile-coated gloves are perfect for workers in construction, manufacturing, fabrication, service technicians, and material handling..CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE.Sandy nitrile dip provides an excellent grip for all conditions.Features ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A3, EN 420:2003+A1:2009, EN 388:2016 4X42C standards.Care instructions: machine-washable