APC PDU
15 results
The APC® AP8632 metered-by-outlet with switching rack power distribution unit features 24 NEMA 5-20R output receptacles for connectivity. It provides remote individual outlet control to remotely manage outlets. This PDU has local current monitoring display to monitor current drawn by the circuit. It offers real power monitoring and a temperature/humidity sensor port. Through secure Web, SNMP or Telnet interfaces, one can access, configure and control switched rack PDUs..Power distribution unit provide active metering of individual outlets and remote on/off switching control of individual outlets.Dimensions: 72"H x 2.2"W x 2"D, 10' cable.Comes in black color.Receptacles: NEMA L5-30P (input), 24 NEMA 5-20R (output).Power: 2.88 kVA, 30 A, 120 VAC.Form factor: Rack-mountable, vertical.Management: Web, SNMP and Telnet.Frequency: 50/60 Hz.Environmental conditions: 23 - 113 deg F, 5 - 95% (humidity).Firmware upgradable and offers overload protection.Includes installation guide, rack mounting brackets, safety guide and serial configuration cable.Meets cUL, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL listed, RoHS, REACH certifications and standards.Weight: 17.71 lbs..Comes with 2 years warranty.Includes installation guide, rack mounting brackets, safety guide, serial configuration cable.Certifications and standards: cUL Listed, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL Listed, RoHS, REACH.Weight: 8.05 Kg.Warranty: 2 years repair or replace.APC® Rack power distribution unit offers advanced power control with individual power metering and is rack-mountable.
APC® Basic power distribution unit featuring rack mounting brackets can be 1U horizontal rack mounted and offers overload protection up to 24 A. Unit has input voltage rating of 200 - 230 V and input current rating of 16 A..IEC-320 C20 8.2' 16 A 200 - 230 V input.120 - 230 V 50/60 Hz output.Outlet connector: 10 IEC 320 C13, 2 IEC 320 C19.1U horizontal rack mount.Includes: Rack mounting brackets, user manual.Puts power where it is needed most-in the racks near the equipment.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: CE, GOST, VDE, Victoria, RoHS complaint.Weight: 9 lbs..Dimensions: 1 3/4"(H) x 17.60"(W) x 2 1/4"(D).2 years limited Mrf. warranty.APC® AP9559 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.
APC® Basic power distribution unit featuring NEMA 5-20R outlet connector can be 1U horizontal rack mounted and includes rack mounting brackets. Unit offers NEMA L5-20P input connections and has input current rating of 20 A..NEMA L5-20P 12' 20 A 100 - 120 V input.120 V 50/60 Hz output.Outlet connector: 10 NEMA 5-20R.1U horizontal rack mount.Includes: Installation guide, rack mounting brackets.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: cUL recognized, CSA, UL 1363, UL recognized, RoHS complaint.Weight: 5.50 lbs..Dimensions: 1.75"(H) x 17.60"(W) x 2.25"(D).2 years limited Mrf. warranty.APC® AP9564 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.
APC® AP9566 Basic Power Distribution Unit, NEMA L6-20P.NEMA L6-20P 12' 20 A 200 - 230 V input.208 V 50/60 Hz output.Outlet connector: 12 IEC 320 C13.1U horizontal rack mount.Includes: Installation guide, rack mounting brackets.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: cUL listed, CSA, UL 60950, UL listed, RoHS complaint.Weight: 5.50 lbs..Dimensions: 1 3/4"(H) x 17.60"(W) x 2 1/4"(D).2 years limited Mrf. warranty.APC® AP9566 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.
APC® Power distribution unit has a input voltage rating of 200/208/230 VAC and output voltage rating of 120 V. Power distribution unit comes with rack mounting brackets for easy installation..NEMA L14-30P 8.53m 24A 200 V, 208 V, 230 V input.50/60 Hz frequency.Outlet connector: 12 x NEMA 5-20R.Black.Cord length: 28'.Output voltage: 120 V.Number of power cords: 1.Maximum total output current draw per phase: 24A, maximum line current per phase: 30 A, Load capacity: 5760 VA.Dimensions: 89 mm(H) x 437 mm(W) x 89 mm(D).Operating environment/ relative humidity/ elevation: 0 - 45 deg C/ 0 - 95%/ 0 - 3000 m, storage temperature/ relative humidity/ elevation: -25 - 65 deg C/ 0 - 95%/ 0 - 15000 m.Offers basic rack PDUs that mount veritcally, without tools in the rear channel of a net shelter VX.Package contents: Basic rack 4.992kVA PDU, installation guide, rack mounting brackets.Certifications and standards: cUL listed, CSA C22.2 No. 107.1, UL 1778, UL listed, RoHS,.Weight: 14 lbs..Warranty: 2 years limited.Basic rack 2U 120V power distribution unit mount veritcally, Without tools in the rear channel of a netshelter VX.
APC AP9567 Basic Rack PDU I=includes installation guide, rack mounting brackets, toolless mounting kit..Nominal Output Voltage 120V.Maximum Total Current Draw per Phase 15A.Nominal Input Voltage 100V, 120V.2 years repair or replace warranty.2 years repair or replace warranty.Includes: installation guide, Rack Mounting brackets, Toolless Mounting Kit.Units do not require additional tools to mount into APC netshelter enclosure, which allows the users to quickly and easily mount units in the rear of the enclosure.Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a NetShelter enclosures.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Weight: 4.8 lbs..Dimensions: 24"(H) x 1.76"(W) x 1.76"(D).2 years limited Mrf. warranty.APC® AP9567 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.
APC AP9563 Basic Rack PDU includes installation guide and rack mounting brackets..Nominal Output Voltage 120V.Maximum Total Current Draw per Phase 16A.Nominal Input Voltage 100V, 120V.Contains Lithium Battery.2 years repair or replace warranty.2 years repair or replace warranty.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: cUL recognized, CSA, UL 1363, UL recognized, RoHS complaint.Weight: 5.50 lbs..Dimensions: 1.75"(H) x 17.60"(W) x 2.25"(D).2 years limited Mfr. warranty.APC® AP9563 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.
Schneider Electric APC AP8932 Rack Switched enables user-customizable power control and active monitoring. It features a remote outlet that allows power on/off functionality and user-defined alarms prevent against IT failures..Power distribution unit provides remote monitoring and control capabilities.Dimensions: 70.5"H x 2.18"W x 1.82"D.Comes in black color.Compatible with APC NetShelter SX enclosure with sides.Load capacity: 2.88 kVA.Input voltage: 100/120 V at 50/60 Hz.Output voltage: 100/120 V.Input current: 30 A.Connectors: NEMA L5-30P input, 24 x NEMA 5-20R output.Form factor: Zero U rack-mountable.Cord length: 9.84'.Overload protection.Operating temperature: 23 to 113 deg F ( -5 to 45 deg C ).Includes rack mounting brackets, serial cable, installation guide.Meets cUL, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL standards.Weight: 17.27 lbs..Comes with 2 year repair or replace warranty.Schneider Electric APC AP8932 Rack Switched - Requires input voltage of 120 V AC
The APC AP8830 metered power distribution unit has 24 NEMA 5-20R receptacles for reliable performance. This 2G power distribution unit is rated at 100 - 120 V and 20 A. It mounts vertically in racks or enclosures and occupies zero U of valuable rack space to facilitate more equipment in the rack..Metered rack power distribution unit enable advanced, user-customizable power control and active monitoring.Dimensions: 70.5"H x 2.18"W x 1.72"D.Comes in black color.Nominal output voltage: 100 V, 120 V.Output connections: (24) NEMA 5-20R (battery Backup).Input connections: NEMA L5-20P.Input frequency: 50/60 Hz.Acceptable input voltage: 100 - 120 VAC.Cord length: 9.84'.Number of power cords: 1.Load capacity: 1920 VA.Maximum input current: 20 A.Regulatory derated input current (North America): 16 A.Temperature: -5 to 45 deg C (operating), -25 to 65 deg C (storage), Relative humidity: 5 - 95 % (operating), 5 - 95 % (storage).Rack-mountable.Contains installation guide, rack mounting brackets, safety guide and serial configuration cable.Meets cUL Listed, FCC Part 15 Class A, ICES-003, UL 60950-1, UL Listed, RoHS certifications or standards.Weight: 12.3 lbs..Comes with 2 years limited warranty
APC® Metered rack PDU 2G provides power utilization data to allow data center managers to make informed decisions on load balancing. Rack allows users to access and configure PDUs through secure web, SNMP or telnet interfaces..IEC 309 60A 3P+PE 208 VAC input, 17.20 kVA power rating.50/60 Hz frequency.Outlet connector: 30 x IEC 320 C13.Cord length: 1.83 meters.Maximum line current per phase: 48 A, Maximum input current per phase: 60 A.Protocols: SNMP, Telnet, Web.Protection type: Overload protection.Form factor: Rack-mountable.Black.Dimension: 72"(H) x 2.2"(W) x 2"(D).Networking: Ethernet 10/100, RS-232.Operating temperature: 0 deg C to 55 deg C, Humidity: 5 - 95%, Operating elevation: 0-3000 meters.Storage temperature: -25 deg C to 65 deg C, Humidity: 5 - 95%, Storage elevation: 0-15000 meters.Includes Rack PDU 2G, Metered, ZeroU, 17.2kW, 208V, (30) C13, installation guide, rack-mounting brackets, safety guide, serial configuration cable.Compliance certificate: cUL, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Class A, ICES-003, UL, VCCI Class A, REACH, RoHS.Warranty: 2 years limited.APC® Metered rack PDU 2G featuring rack-mountable form factor has voltage rating of 208 VAC and provides active metering to enable energy optimization as well as protects circuit.
APC® Rack metered power distribution unit 2G includes real power monitoring a temperature/humidity sensor port and locking IEC receptacles. 10 kVA PDU can be accessed or configure through secure Web, SNMP or Telnet interfaces..CS8365 35 A 208 VAC.50/60 Hz frequency.Outlet connector: 36 x IEC 60320 C13, 6 x IEC 60320 C19.Power rating: 10 kVA.Cord length: 1.83 m, Number of cord/cable: 1.Output voltage: 208 VAC.Form factor: Rack mountable.Dimensions: 72"(H) x 2.2"(W) x 2"(D).Protection type: Overload protection, Management: SNMP, Telnet, Web.Temperature: 32 to 122 deg F(operating), Operating humidity: 5 - 95%.Features current meter.Provide power utilization data to allow data center managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership.Include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra-low profile circuit breaker.Includes Rack PDU 2G, metered, zeroU, 10.0 kW, 208 V, (36) C13 and (6) C19, installation guide, rack mounting brackets, safety guide, serial configuration cable.Certifications and standards: cUL, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Class A, ICES-003, UL, VCCI Class A, RoHS, REACH, Green compliant.Weight: 18.78 lbs..Warranty: 2 years limited.APC® Rack metered power distribution unit 2G features remote alerts to warn of potential circuit overloads and provide power utilization data to allow data center managers to make informed.
The APC® AP6002A basic rack power distribution unit with 16-outlet has a voltage rating of 200-240 V AC..Basic rack power distribution unit offers a range of basic and metered PDUs for any application.Dimensions: 32.81"H x 2.19"W x 1.85"D.Input connection: NEMA L6-30P cord, output connections: (14) IEC 60320 C13 and (2) IEC 60320 C19.Maximum input current (phase): 30 A (24 A UL/C-UL derated), input frequency: 50/60 Hz.Maximum output current: C19, 16 A, C13, 12 A (UL/CUL derated) C19, 20 A, C13, 15 A (PSE) (outlet), 30 A (24 A UL/C-UL derated) (phase).Acceptable input voltage: 200-240 VAC +6% to -10%, output voltage: 200-240 VAC +6% to -10%.Overcurrent protection (internal): (2) 20 A, 2-pole breakers.Distributes power to devices in the rack.Cord length: 10'.Maximum elevation (above MSL): Operating: 0 to 3048 m.Temperature: Operating: 0 to 50 deg C, storage: -15 to 60 deg C, humidity: Operating/storage: 5 to 95%, non-condensing.Includes NEMA L6-30P cord.Meets Safety approvals: UL/C-UL, ROHS: 2011/65/EU-latest revision standards.Weight: 8.49 lbs.
The APC® Zero U AP8962 5.76 kVA switched rack power distribution unit in black, is perfect for APC NetShelter SX enclosure with sides. It supplies power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. It has an input voltage rating of 208 V 3PH and output voltage rating of 120 V at 60 Hz. It uses NEMA L21-20P input, 24 x NEMA 5-20R output connectors. It includes rack mounting brackets, serial cable and installation guide..Power distribution unit provides remote monitoring and control capabilities.Dimensions: 70.5"H x 2.18"W x 1.72"D.Comes in black color.Compatible with APC NetShelter SX enclosure with sides.Load capacity: 5.76 kVA.Input voltage: 208 V 3PH at 50/60 Hz.Output voltage: 120 V.Input current: 20 A.Connectors: NEMA L21-20P input, 24 x NEMA 5-20R output.Form factor: Zero U rack-mountable.Cord length: 6'.Overload protection.Operating temperature: 23 to 113 deg F ( -5 to 45 deg C ).Includes rack mounting brackets, serial cable, installation guide.Meets cUL, FCC Part 15 Class A, ICES-003, UL 60950-1, UL standards
APC® Power distribution unit has a input voltage rating of 200/208/230 VAC and output voltage rating of 200/208/230V. Power distribution unit offers active metering and includes a temperature/humidity sensor port..IEC-320 C20 20A 200V, 208V, 230V input.50/60 Hz frequency.Outlet connector: 18 x IEC 320 C13, 2 x IEC 320 C19.Black.Output voltage: 200 V, 208 V, 230 V.Maximum total output current draw per phase: 16 A, Maximum line current per phase: 20 A.Dimensions: 902 mm(H) x 56 mm(W) x 44 mm(D).Operating environment/ relative humidity/ elevation: -5 - 45 deg C/ 5 - 95%/ 0 - 3000 m, storage temperature/ relative humidity/ elevation: -25 - 65 deg C/ 5 - 95%/ 0 - 15000 m.Protocols: SNMP, telnet.Remote management capabilities, local current monitoring display, alarm thresholds, load indicator LED.Integrates with infrastruxure central, flash upgradeable, wide range of input and output connections.Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers.Certifications and standards: CSA C22.2 No. 60950, IEC 60950, METI denan, UL 60950-1, VDE, RoHS, REACH(contains no SVHCs), battery directive.Weight: 6.46 lbs..Warranty: 2 years repair or replace.Metered rack 2G 208/230V 20/16A power distribution unit provide power utilization data to allow data center managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership.
Optimize energy usage with this power distribution unit. A load indicator LED helps protect against overloading circuits by issuing warnings based on alarm parameters you can customize as needed. With a rack-mountable design, this unit can be secured horizontally or vertically, providing easy access to equipment. Featuring a compact design, this power distributor is easy to tuck out of the way for a tidy appearance. The branch whip lets multiple devices receive power at the same time. This APC metered rack power distribution unit is flash upgradeable, letting it download changes and improvements from the network and keeping it up to date for optimal performance..Metered rack PDU provides active metering to enable energy optimization and circuit protection.208V three-phase power, input frequency: 50/60Hz; maximum total current draw per phase: 48A.Dimensions: 72"H x 2.2"W x 2"D, weight: 20.9 lbs..Input connection: 4-pin IEC-309 connector, maximum input current is up to 48A UL.Output connections: 6 IEC-320-C13 and 12 IEC-320-C19 outlets.USB port allows for firmware upgrades, CAN ports enable data transfer for future expansion options.Provide real-time remote monitoring of connected loads, user-defined alarms warn of potential circuit overloads before critical IT failures occur.Features real power monitoring, temperature/humidity sensor port, locking IEC receptacles, and ultra-low-profile circuit breakers.2-year manufacturer limited warranty.Provide circuit protection with this APC metered rack-mountable power distribution unit.