Cat6 Ethernet Cable for Home Networking

StarTech.com® UTP Cat 6 Patch cable in black color offers reliable signal routing in IT hardware of 500 MHz Ethernet networks. It is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. The 25' cable has eight 24 AWG stranded conductors to transfer data at a high-speed through the Ethernet network equipments. Snagless design of the male-to-male connector protects RJ45 tab from damages such as wear and tear during installation. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission..Easy-to-install 25' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.Constructed with top quality component minimizes crosstalk and interference.Comes in black color for a new look.Snagless cable offers flexibility.Meets CMG flame retardant test to minimize fire hazards.4 pair UTP conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.CAT6 rated cable provides performance of up to 500 MHz.50 micron Gold-plated connector plating for good conductivity.Molded strain relief design avoids the cable from being bent at sharp angles at the RJ45 connector.Ensure high-performance capability for your demanding ethernet applications.Meets all requirements and standards of RoHS, Wiring Standard: TIA/EIA-568-B.1-2001 T568B.Includes 1 x 25' black snagless ETL verified Cat6 UTP patch cable.Designed for use with Gigabit networks, patches from hub to distribution panel.Comes with limited lifetime warranty.StarTech.com® N6PATCH25BK 25' Black UTP Cat 6 patch cable provides PoE capable gigabit network application. Snagless RJ45 connectors offers reliable connection.

The Belkin® RJ45 Performance Category 6 UTP patch cable is the perfect performance upgrade. Used to replace any Cat 5 cable that fails to support 100 Base-T or Gigabit Ethernet. Includes RJ45 male-to-male connectors and a snagless molded strain relief. Sn agless molds protect the RJ45 tap from being damaged during installation. Internal load bar assures accurate positioning of pairs and consistent high performance. 2-row staggered pin configuration to control cross-talk at hyper-frequency. Capable of impro ving the return loss in your current network by 40%!.Perfect in conjunction with 100 Base-T and Gigabit Ethernet networks.50 micron gold plated connectors to ensure a clean and clear transmission.Exceeds the performance requirement of Category 6; PowerSum tested.Black color; 100' length.Manufacturer's lifetime warranty.Belkin™ 100' CAT6 Snagless patch cable in black color in gray color is capable of improving the return loss in current network by 40 percent and is compatible with 100 Base-T.

The C2G 27153 10' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..RJ-45 Male.10ft.Black.Features black polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.25 lbs..Comes with lifetime warranty.6 outlets surge protector features 15 A, 120 V, 1800 W, 2 position on/off switch/15 A AC circuit breaker.

Achieve Unmatched Network Performance with StarTech 100ft Cat6a Ethernet Cable Elevate your network connectivity with the StarTech 100ft Cat6a Ethernet Cable. Engineered for high-performance and durability, this cable ensures fast, reliable, and secure connections for all your networking needs. Designed to support Multi-Gigabit/Multi-speed connections, this Cat6a cable offers robust protection against electromagnetic interference (EMI/RFI) and noise, ensuring minimal signal loss and consistent performance. The 27AWG pure bare copper wire construction enhances conductivity and reduces resistance, providing reliable data transmission. The snagless connectors with 50-micro gold-plated contacts ensure a precise fit, minimizing wear and maintaining signal integrity. The flexible Low Smoke Zero Halogen (LSZH) jacket is flame-retardant, emitting low smoke and toxic fumes, making it ideal for installations in poorly-ventilated areas, industrial settings, and residential environments. This versatile Cat6a patch cord is perfect for 10GBASE-T networks and supports up to 100W output for Power over Ethernet (PoE++) devices. It is backward compatible with Cat 6 and Cat 5/5e standards, ensuring seamless integration into existing network setups..This Cat6a Ethernet cable is designed for networking use, providing reliable connectivity for high-speed data transmission in both professional and home environments..The cable measures 100 feet in length, offering extensive reach for various networking setups..The cable features RJ-45 connectors on both ends, each with 8 pins, ensuring compatibility with standard Ethernet ports..Constructed with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, the cable is durable and safe for various installations. The true color of the cable is gray..Terminal type 1: RJ-45 male connector on one end. Terminal type 1: RJ-45 male connector on the other end..Supports data transfer rates up to 10Gbps, making it ideal for 10GBASE-T networks and backward compatible with Cat 6 and Cat 5/5e standards..Compatible with 10G switches, Network Attached Storage (NAS), SFP modules, and PoE++ devices. For a full list of compatible devices, refer to the extended description..The cable is Fluke Tested and ETL Verified for guaranteed Cat6a performance. It complies with RoHS, REACH, and CE standards for safety and environmental protection..The cable comes with a lifetime warranty, ensuring long-term reliability and performance.

Premium cabling for Cat6 home/office network applications.Rated for 550 MHz/1 Gbps communications.Snagless connectors prevent damaged tabs during installation.24 AWG 4-pair stranded UTP with PVC jacket.Integral strain relief protects connectors from

The C2G 22014 15' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.15ft.Blue.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.4 lbs..Comes with lifetime warranty

Avoid having excess Ethernet cable lying around by building your own cables to the exact length needed using this Bulk Ethernet Copper Cable from Monoprice! Features: Unshielded Twisted Pair (UTP) Category 6 Ethernet cable 23AWG solid, pure bare copper conductors CMP (Plenum) fire safety rating 550MHz bandwidth 1000 foot roll Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

CAT-6 for seamless connection over a network.Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.50' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty

The Monoprice 75 ft. Cat6 Ethernet Cable (5027) delivers reliable, high‑speed connectivity for home and office networks, making it ideal for streaming, gaming, data transfers, and connecting routers, switches, PCs, and smart devices. Constructed with durable 24AWG stranded copper conductors and precision twisting, this cable reduces crosstalk and maintains stable Gigabit Ethernet performance over long distances. The blue PVC jacket offers flexibility and easy identification in complex cabling environments, while molded strain‑relief boots help protect the connectors from wear. Perfect for long‑run installations, this 75‑foot Cat6 cable provides dependable wired performance for fast, secure, and interference‑reduced networking..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

The C2G® 14' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.14ft.Blue.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.42 lbs..Comes with lifetime warranty

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all CAT-6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..CAT-6 snagless unshielded (UTP) ethernet network patch cable is designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Cable length: 5'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.Snagless connector design for high density environments and protecting the RJ-45 connector's lock.Supports 10 Gigabit networks up to 180' for fast data transmission and maximum performance and supports 1 Gigabit up to 328'.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk.Meets all CAT-6 TIA/EIA requirements for supporting a wide variety of applications.50 cables per pack.Lifetime limited manufacturer warranty

The Tripp Lite 2' black Cat6 Gigabit snagless molded patch cable features RJ-45 gold-plated male connectors on both the ends for clean and clear transmission. It has four twisted pairs 24 AWG stranded copper conductor for better conductivity and PVC jacket for added durability. Patch cable has molded connectors with integral strain relief added security and durability. It is great for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type-3 applications. Cable featuring data transfer rate of 1 Gbps, is suitable for use with computers, printers, video game systems, Blu-ray players, copy machines, routers and modems. Snagless design of cable effectively avoids locking connector tabs from damage while installing..Cat6 gigabit snagless molded patch cable is perfect for home or office.Cable length: 2'.Connections: One RJ-45 male connector on both ends.PVC jacket for added durability and 4-pair 24 AWG stranded copper conductor for excellent signal transmission.RoHS compliant.Gold-plated copper contacts for maximum conductivity.Compatible with computers, printers, video game systems, Blu-ray players, copy machines, routers and modems.Comes in black color.Data transfer rate: 1 Gbps.Bandwidth: Rated for 550 MHz.Snagless design aids to avoid locking connector tabs from damage while installing.Perfect for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications.Comes with lifetime limited warranty

Save the time and hassle of building Ethernet cables by using fixed-length UTP Cat6 Ethernet Network Cables from Monoprice! The ZEROboot series of Ethernet cables are designed for IT and data center professionals who prefer interconnect cables without the covers that protect the plug retaining clips, allowing for faster and easier cable connections. Features: Unshielded Twisted Pair (UTP) Category 6 Ethernet cable 24AWG stranded, pure bare copper conductors 550MHz bandwidth No protective plug retaining clip covers 50µm gold plated contacts 7-foot length (tip to tip) Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Delivers fast data transfer and optimal signal quality.Constructed with durable materials for long-lasting use.Slim design ensures easy installation and space efficiency

Startech® 15' Cat 6 Snagless RJ-45 Male/Male Patch Cables.Cat6 utp patch cable offers reliable signal routing.Easy-to-install 15' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.Constructed with top quality component minimizes crosstalk and interference.Comes in black color for a new look

Comprehensive CAT6 550 Mhz Snagless Patch Cables have a molded low profile, snagless boot that makes installing these cables quick and easy every time while providing superior strain relief. CAT5E Patch Cables are available in a variety of colors. RoHS Compliant. Lifetime Warranty. When it has to work, it has to be Comprehensive!.This cable is being used For connecting devices like computers, switches, routers, and other networking equipment within a network..Has a length of 3 feet..Have a RJ45 connectors on both ends and Connector Type is RJ45 and total Pin Count is 8 pins..Includes a 24 AWG Gauge and High-quality PVC Cable Jacket Material for superior protection and durability and bare copper conductor material For maximum flexibility and optimal conductivity Comes with a green color..Has specific features relevant to data transmission: High Data Transfer Rate: Supports data transfer rates of up to 10 Gbps (10,000 Mbps), making it suitable for high-speed network applications. Bandwidth: Capable of handling frequencies up to 550 MHz, ensuring efficient data transmission over the network..Compatible with a variety of devices and equipment used in networking. Here are some examples: Computers (Desktops and Laptops) Routers Switches ..Certified by Restriction of Hazardous Substances (RoHS)..Comes with a limited lifetime warranty.

The C2G® 7' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 7'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.21 lbs..Comes with lifetime warranty

Achieve Unmatched Network Performance with StarTech 100ft Cat6a Ethernet Cable Elevate your network connectivity with the StarTech 100ft Cat6a Ethernet Cable. Engineered for high-performance and durability, this cable ensures fast, reliable, and secure connections for all your networking needs. Designed to support Multi-Gigabit/Multi-speed connections, this Cat6a cable offers robust protection against electromagnetic interference (EMI/RFI) and noise, ensuring minimal signal loss and consistent performance. The 27AWG pure bare copper wire construction enhances conductivity and reduces resistance, providing reliable data transmission. The snagless connectors with 50-micro gold-plated contacts ensure a precise fit, minimizing wear and maintaining signal integrity. The flexible Low Smoke Zero Halogen (LSZH) jacket is flame-retardant, emitting low smoke and toxic fumes, making it ideal for installations in poorly-ventilated areas, industrial settings, and residential environments. This versatile Cat6a patch cord is perfect for 10GBASE-T networks and supports up to 100W output for Power over Ethernet (PoE++) devices. It is backward compatible with Cat 6 and Cat 5/5e standards, ensuring seamless integration into existing network setups..This Cat6a Ethernet cable is designed for networking use, providing reliable connectivity for high-speed data transmission in both professional and home environments..The cable measures 100 feet in length, offering extensive reach for various networking setups..The cable features RJ-45 connectors on both ends, each with 8 pins, ensuring compatibility with standard Ethernet ports..Constructed with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, the cable is durable and safe for various installations. The true color of the cable is black..Terminal type 1: RJ-45 male connector on one end. Terminal type 1: RJ-45 male connector on the other end..Supports data transfer rates up to 10Gbps, making it ideal for 10GBASE-T networks and backward compatible with Cat 6 and Cat 5/5e standards..Compatible with 10G switches, Network Attached Storage (NAS), SFP modules, and PoE++ devices. For a full list of compatible devices, refer to the extended description..The cable is Fluke Tested and ETL Verified for guaranteed Cat6a performance. It complies with RoHS, REACH, and CE standards for safety and environmental protection..The cable comes with a lifetime warranty, ensuring long-term reliability and performance.

C2G® CAT6 UTP Patch cable in white color connects network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking equipments. The 10' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. HDPE shielding on 24 AWG conductors secure data from electromagnetic and radio frequency interference. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Snagless design of the RJ45 male-to-male connector prevents wear and tear during installation. Suitable for application involving voice, data and video distribution in Ethernet and gigabit network..Network patch cable that protects clips when plugging and unplugging.Easy-to-install 10' long cord.RJ-45 male to male connectors for reliable connections.Ultra flexible PVC jacket offers double shielding against outside noise.Comes in white color for a new look.Network patch cable offers flexibility.Operates at 30 V and 60 Deg C for better operation.2 x 8P8C (RJ45), 4 twisted pair conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.50-micron Gold-plated connector plating for good conductivity.Patch style connector is great for HD video applications.Polycarbonate connector and molded PVC hood for heavy duty use.Has 0.60 mm average thickness and 6.20 mm + or - 0.30 mm outer diameter for ease of use.Meets RoHS Certification and standards.9.38 ohm 100m conductor DC resistance for better performance.Weighs 0.29 lb.Comes with lifetime warranty.C2G® 27163 10' White CAT6 UTP Patch cable supports 10/100/1000 Base-T gigabit network application. Snagless molded RJ-45 male to male connectors offer reliable connection.

Connect your computer system to a router, switch or hub with the Monoprice CAT-6 Cable that offers reliable Ethernet connectivity. Both ends of this networking cable play host to RJ-45 male connectors for seamless connection between devices. It has a durable and good-quality jacket that preserves the integrity of the high-quality copper conductor..CAT-6 for seamless connection over a network.Designed to transmit data at 1100 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.The Monoprice 2' CAT-6 Ethernet Network Cable, Gray, is ideal for 10 Gigabit Ethernet networks and provides dependable data transfer.

The Cat6 Snagless Unshielded (UTP) Slim Network Patch Cable is the perfect solution for high density datacenter applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard Cat6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard Cat6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard Cat6 cables. The small size and small bend radius of this cable allows it to be easily routed through cable management panels. This cable is designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..Offers a reliable network connectivity.Features Category 6 cable type.Protects the plug and socket from dust when plugged in

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 7'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

Set up a reliable 10 Gbps connection to a switch or networking device, using this Shielded Snagless S/FTP Category 6a Ethernet Cable. Pure Bare Copper Wire Our Snagless Cat6a Cables are designed for long-lasting performance. The 4-Pair Shielded and Foiled Twisted Pair (S/FTP) construction utilizes 27AWG pure bare copper wire for improved conductivity and low resistance, ensuring reliable transmission and minimal signal loss. Pure bare copper wiring offers consistent performance characteristics across different environments. Each pair is shielded in aluminum-mylar foil and tinned copper braid for enhanced EMI protection. Durable Construction The Cat6a Ethernet Cable features snagless 50-micro gold-plated connectors that enable a precise fit to minimize wear and signal loss. The flexible Low Smoke Zero Halogen (LSZH) flame-retardant jacket emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer installations in poorly-ventilated areas including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered..it is used for Networking and suitable for high-performance Ethernet connections Ensuring reliable and high-speed data transfer in network setups for various devices..The cable length is 75 feet..Has the following connections: Connectors: RJ45 (male) on both ends Pins: 8 pins in each RJ45 connector.27 AWG cable with a low smoke zero halogen (LSZH) jacket, featuring pure bare copper conductors and a black exterior.Compatible with the following devices: Computers , Printers , Routers.Comes with a Lifetime warranty.

Startech® 25' Cat 6 Molded RJ-45 Male/Male Patch Cables.High-quality cat6a molded utp patch cable offers reliable signal routing.Easy-to-install 25' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.100 percent copper construction for outstanding value.Comes in black color for a new look.StarTech .com® C6PATCH25BK 25' Black UTP Cat 6 patch cable is useful for PoE capable Gigabit network application. Molded RJ45 connectors offers reliable connection.

The C2G® 7' male to male category 6 yellow snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 7'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in yellow color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.22 lbs..Comes with lifetime warranty

CAT6 PATCH CABLE 5FT BLUE.Cat6 UTP snagless patch cable is perfect for VoIP, video and file transfers.Cable length: 5'.Has one RJ-45 male connector on both the ends for reliable connectivity.Features HDPE insulation and 4 pairs of 24 AWG copper conductors for better conductivity.ISO/IEC 11801 and TIA/EIA-568-B.2-1 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Belkin OmniView SMB 1x16 KVM-over-IP switch, SMB 1x8 KVM-over-IP switch and SMB CAT5 KVM switch.Comes in blue color.Enhances your network speed with higher bandwidth.Diameter: 5.9 mm + 0.15 mm jacket.Voltage: 300 V, Dielectric strength: 1.5 kV (AC).Resistance: 93.8 Ohm/km/20 deg C max, Impedance: 100 Ohm + 15 Ohm at 1 - 550 MHz.Mutual capacitance: 56 pF/m max.Temperature: 75 deg C.Propagation delay: 536 ns/100 m max at 550 MHz, Structural return loss: 8.6 dB min at 550 MHz.Staggered pin configuration for secure connection.CM flame retardant test.Comes with lifetime limited warranty

Connect network devices with this StarTech Cat6 UTP patch cable, designed for reliable, high-speed Ethernet connections. The 4 ft length is ideal for desktop setups, switch-to-device connections, and short cable runs. It features RJ45 male connectors and is specified to transmit up to 1000 Mbps per the retailer listing. Backed by a lifetime limited warranty for long-term confidence..Cat6 UTP cable supports dependable Ethernet connectivity.Designed to transmit data at 1000 Mbps (per retailer listing).4 ft length for convenient short-run connections.RJ45 male connectors on both ends.Blue jacket supports easy visual identification and cable management.Lifetime limited warranty.Stable Cat6 connection helps reduce lag and drops for PCs, printers, and switches. Short 4 ft length keeps cable clutter under control.

Get reliable internet connectivity by using this Ethernet patch cable. The gold-plated RJ45 connectors ensure high-quality signal transmission, while compatibility with CAT6 technology delivers speeds of up to 1Gbps. This Belkin Ethernet patch cable features molded strain relief to avoid fraying..CAT6 Ethernet patch cable for connecting to LANs or the Internet.32.81' cable length.RJ45 plugs with 50-micron gold-plated connectors.Features four unshielded twisted pair (UTP) 24 AWG stranded copper wires to reduce electromagnetic interference.Meets the CAT6 standard and is suitable for use with 100/1000BASE-T networks.Wires are housed in a durable PVC outer jacket for abrasion and corrosion resistance.Snagless design prevents cracking and breaking.Connect your computer to networking devices with this Belkin Ethernet patch cable.

Tripp Lite® 25' Cat6 RJ45 Male/Male Gigabit Snagless Molded Patch Cable, Red.Red.Cable type: Category 6.Cable length: 25'.Material: Polyvinyl chloride (PVC) jacket.Connector details: 1 x RJ-45 male network on first and second end.Technology: Unshielded twisted pair (UTP).Conductor: Copper, Wires per cable: 8, Pairs per cable: 4.Features: Snagless, molded.Rated for 550 MHz/1 Gbps communication.Application: Computer networking.System requirements: For 1000 Base-T (1Gbps Ethernet), 10/100 Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and Token Ring TYPE 3 applications as well as EIA/TIA applications.Drastically reduce impedance and structural return loss, staggered-pin plug design to keep near-end crosstalk levels to a minimum.Integral strain relief.Certification and Standards: UL, IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL.Warranty: Lifetime limited.Tripp Lite® 25' Cat6 molded patch cable in red color featuring high quality copper wire and a staggered-pin plug offers guaranteed performance in minimizing near-end crosstalk levels.

CAT-6 for seamless connection over a network..Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.20' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

Patch cable..CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1100 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.7' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male network connectors on both sides for dependable network connectivity.25' CAT-6 for easy tethering.Comes with a lifetime limited warranty

Startech® 35' Cat 6 Snagless RJ-45 Male/Male Patch Cables.Easy-to-install 35' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.Constructed with top quality component minimizes crosstalk and interference.Comes in green color for a new look.Snagless cable offers flexibility.Meets CMG flame retardant test to minimize fire hazards.4 pair UTP conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.CAT6 rated cable provides performance of up to 500 MHz.50 micron Gold-plated connector plating for good conductivity.Molded strain relief design avoids the cable from being bent at sharp angles at the RJ45 connector.Ensure high-performance capability for your demanding ethernet applications.Meets all requirements and standards of RoHS, Wiring Standard: TIA/EIA-568-B.1-2001 T568B.Includes 1 x 35' green snagless ETL verified Cat6 UTP patch cable.Designed for use with Gigabit networks, patches from hub to distribution panel.Comes with limited lifetime warranty.Comes with limited lifetime warranty.StarTech.com® N6PATCH35BK 35' Green UTP Cat 6 patch cable provides PoE capable gigabit network application. Snagless RJ45 connectors offers reliable connection.

StarTech C6PATCH15WH 15ft Cat-6 White Molded RJ45 UTP Gigabit Patch Cable.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Backed by StarTech.com lifetime warranty.Molded RJ45 connectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire

CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.10' CAT-6 for easy tethering.Comes with a lifetime limited warranty

CAT-6 for seamless connection over a network..Designed to transmit data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.50' CAT-6 for easy tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

StarTech.com® UTP Cat 6 patch cable in orange color offers reliable signal routing in IT hardware of 500 MHz Ethernet networks. It is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. The 20' cable has eight 24 AWG UTP copper conductors to transfer data at a high-speed through the Ethernet network equipments. Molded design of the male-to-male connector protects RJ45 tab from damages such as wear and tear during installation. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission..Cat6 molded utp patch cable for high-performance.Easy-to-install 20' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.100 percent copper construction for outstanding value.Comes in orange color for a new look.Color: Orange, Connector plating: 50-micron gold plated.Cable rating: Cat6 - 500 MHz, Number of conductors: 4 pair UTP, Fire rating: CMG rated (general purpose).Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color-coding.Constructed with top quality components.Includes patch cable.Comes with lifetime warranty.StarTech.com® C6PATCH20BK 20' Orange UTP Cat 6 patch cable is useful for PoE capable Gigabit network application. Molded RJ45 connectors offers reliable connection.

CAT-6 for seamless connection over a network.Gold-plated RJ-45 male connectors on both sides for easy connectivity.100' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

C2G ® CAT6 UTP Patch cable in blue color connects network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking equipments. The 25' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. HDPE shielding on 24 AWG conductors secure data from electromagnetic and radio frequency interference. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Snagless design of the RJ45 male-to-male connector prevents wear and tear during installation. Suitable for application involving voice, data and video distribution in Ethernet and gigabit network..Network patch cable that protects clips when plugging and unplugging.Easy-to-install 25' long cord.RJ-45 male to male connectors for reliable connections.Ultra flexible PVC jacket offers double shielding against outside noise.Comes in blue color for a new look.Network patch cable offers flexibility.Operates at 30 V and 60 Deg C for better operation.2 x 8P8C (RJ45), 4 twisted pair conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.50-micron Gold-plated connector plating for good conductivity.Patch style connector is great for HD video applications.Polycarbonate connector and molded PVC hood for heavy duty use.Has 0.60 mm average thickness and 6.20 mm + or - 0.30 mm outer diameter for ease of use.Meets RoHS Certification and standards.9.38 ohm 100m conductor DC resistance for better performance.Weighs 0.67 lb.Comes with lifetime warranty.C2G ® 27145 25' Blue CAT6 UTP Patch cable supports 10/100/1000 Base-T gigabit network application. Snagless molded RJ-45 male to male connectors offer reliable connection.

The 4XEM 1000 ft Cat6A Pure Copper Riser Bulk Cable is engineered for professional‑grade network installations requiring reliable, high‑speed data transmission and long‑term durability. Built with 99.99% pure copper solid 23 AWG conductors, the cable delivers superior conductivity, reduced attenuation, and exceptional signal integrity across long horizontal or vertical runs. Its CMR‑rated PVC jacket is UL‑listed for safe in‑wall and riser applications, ensuring compliance with ANSI/TIA‑568.2‑E, ISO/IEC 11801, and RoHS/REACH standards. Supporting 10 Gbps performance at 500 MHz (tested up to 700 MHz), the cable includes a pair divider to minimize crosstalk and maintain signal clarity. Ideal for enterprise, commercial, and residential builds, this high‑performance bulk spool enables custom‑length terminations for LAN, internet, and VoIP systems. Packaged on a durable wooden drum, it is backed by a lifetime warranty..Suited for networking installations requiring riser‑rated cable..Reaches 1000 feet for long custom horizontal or vertical runs..Features bare‑wire ends for flexible termination options..Uses 23 AWG solid pure copper with black CMR PVC jacket..End 1 terminates as bare wire for installer customization..Supports 10 Gbps Cat6A data at 500 MHz tested to 700 MHz..Works with switches, patch panels, and structured cabling..Complies with ANSI/TIA‑568.2‑E and ISO/IEC 11801..Lifetime warranty for long‑term reliability.

Save the time and hassle of building Ethernet cables by using fixed-length UTP Cat6 Ethernet Network Cables from Monoprice! The FLEXboot Series of cables feature a thinner cable boot protecting the plug retaining clip, which makes it much easier to depress the clip and protective cover. Features: Unshielded Twisted Pair (UTP) Category 6 Ethernet cable 24AWG stranded, pure bare copper conductors 550MHz bandwidth Snagless cable boot protects the plug retaining clip Thinner cable boot makes it easier to depress the clip and protective cover 50µm gold plated contacts 50-foot length (tip to tip) Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

Achieve Unmatched Network Performance with StarTech 100ft Cat6a Ethernet Cable Elevate your network connectivity with the StarTech 100ft Cat6a Ethernet Cable. Engineered for high-performance and durability, this cable ensures fast, reliable, and secure connections for all your networking needs. Designed to support Multi-Gigabit/Multi-speed connections, this Cat6a cable offers robust protection against electromagnetic interference (EMI/RFI) and noise, ensuring minimal signal loss and consistent performance. The 27AWG pure bare copper wire construction enhances conductivity and reduces resistance, providing reliable data transmission. The snagless connectors with 50-micro gold-plated contacts ensure a precise fit, minimizing wear and maintaining signal integrity. The flexible Low Smoke Zero Halogen (LSZH) jacket is flame-retardant, emitting low smoke and toxic fumes, making it ideal for installations in poorly-ventilated areas, industrial settings, and residential environments. This versatile Cat6a patch cord is perfect for 10GBASE-T networks and supports up to 100W output for Power over Ethernet (PoE++) devices. It is backward compatible with Cat 6 and Cat 5/5e standards, ensuring seamless integration into existing network setups..This Cat6a Ethernet cable is designed for networking use, providing reliable connectivity for high-speed data transmission in both professional and home environments..The cable measures 100 feet in length, offering extensive reach for various networking setups..The cable features RJ-45 connectors on both ends, each with 8 pins, ensuring compatibility with standard Ethernet ports..Constructed with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, the cable is durable and safe for various installations. The true color of the cable is blue..Terminal type 1: RJ-45 male connector on one end. Terminal type 1: RJ-45 male connector on the other end..Supports data transfer rates up to 10Gbps, making it ideal for 10GBASE-T networks and backward compatible with Cat 6 and Cat 5/5e standards..Compatible with 10G switches, Network Attached Storage (NAS), SFP modules, and PoE++ devices. For a full list of compatible devices, refer to the extended description..The cable is Fluke Tested and ETL Verified for guaranteed Cat6a performance. It complies with RoHS, REACH, and CE standards for safety and environmental protection..The cable comes with a lifetime warranty, ensuring long-term reliability and performance.

The 4XEM™ 25' blue RJ-45 Cat6 molded UTP patch cable is perfect for high performance networking applications. It has one RJ-45 male connector on both ends for connectivity. The snagless design safeguards the locking tabs on the RJ45 connectors from damage during installation. It has molded-strain relief construction for longer life and features copper conductor for high electrical conductivity. This molded PVC cable supports 500 MHz/1 Gbps data communication..Cat6 molded UTP patch cable for network device and notebook.Cable length: 25'.Connections: One RJ-45 male connector on both ends.CMG rated PVC jacket for added durability and 4-pair 24 AWG stranded copper conductor for excellent signal transmission.Meets IEEE 802.3ab, IEEE 802.5 and TIA/EIA-568-B.1-2001 T568B certification or standards.Comes in blue color.Features molded connectors with integral strain relief for added durability.Bandwidth: Rated for 500 MHz/1 Gbps communication.Snagless design aids to protect the locking tabs on the RJ45 connectors from damage or snap-off while installing.Comes with limited lifetime warranty

Startech® 50' Cat 6 Snagless RJ-45 Male/Male Patch Cables.Cat6 utp patch cable offers reliable signal routing.Easy-to-install 50' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.Constructed with top quality component minimizes crosstalk and interference.Comes in black color for a new look.StarTech.com® N6PATCH50BK 50' Black UTP Cat 6 patch cable provides PoE capable gigabit network application. Snagless RJ45 connectors offers reliable connection.

The Cat6 Snagless Unshielded (UTP) Slim Network Patch Cable is the perfect solution for high density datacenter applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard Cat6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard Cat6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard Cat6 cables. The small size and small bend radius of this cable allows it to be easily routed through cable management panels. This cable is designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..Experience a simpler way to connect devices with the entire business network.Features Category 6 cable type.Features Snagless.Features 1 x RJ-45 Male Network connector, permitting you to establish a connection with a network device

10ft Cat6 Snagless Unshielded (UTP) Network Patch Cable - Red.Category 6 for Network Device.RJ-45 Male.RJ-45 Male.10ft.Red

This 5 ft Molded Cat 6 Patch Cable is ETL verified to meet or exceed all Category 6 performance standards and features a durable green jacket that simplifies departmental color coding while providing rugged flexibility for network connections..50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Backed by StarTech.com lifetime warranty.Molded RJ45 connectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire.Certifications & Standards: ETL

Ensure a reliable Ethernet network connection between your system and router using the Comprehensive CAT6-25BLK CAT-6 Cable. Both ends of this networking cable play host to RJ-45 male connectors for seamless connection between devices. It has a durable and good-quality PVC jacket that preserves the integrity of the high-quality copper conductor. With its snagless design, the cable does not snap during installation and its connector clips remain protected..CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.25' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

The StarTech C6ASPAT7BK 7' Cat6a black patch cable features RJ-45 male connectors on both the sides for enhanced connectivity. This snagless shielded patch cable with PVC jacket, is great for 10GBase-T Ethernet networks and protects data against electromagnetic interference. It supports speeds up to 500 MHz and is compatible with PoE enabled devices. This cable assures fast and dependable 10 Gigabit network connections..Patch cable is perfect to connect servers to a storage area network, connect between computers, hubs, switches, routers, print servers & patch panels.Dimensions: 7'L.Comes in black color and features aluminum-polyester foil and polyvinyl chloride jacket for added protection.Interface/ports: RJ-45 male on both sides.Number of conductors: four pair STP, Wire gauge: 25 AWG.Shielded snag-less cable offers superior protection.Cable rating: Cat6a - 10 Gb/s.Fire rating: CMG rated (general purpose).Protects data against noise & EMI/RFI interference and creates secured connections with snagless clips to protect the connectors during installation.Contains one patch cable.RoHS and green Compliant.Weight: 3.1 oz..Comes with lifetime warranty