Circuit Heaters
1 resultsThe Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emmiter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 25"H x 11.5"W x 14.5"D; weight: 17 lbs..Maximum wattage: 1450W; maximum heat energy: 4947 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 50 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 120V.Element life expectancy: 25000 hours.Made in the USA.This model is equipped with a 15' cord set with NEMA 5-15 molded plug.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
You May Also Like
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 46.25"H x 11.5"W x 14.5"D; weight: 23 lbs..Maximum wattage: 3150W; maximum heat energy: 10749 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 125 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 277V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 46.25"H x 11.5"W x 14.5"D; weight: 23 lbs..Maximum wattage: 3150W; maximum heat energy: 10749 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 125 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 208V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 46.25"H x 11.5"W x 14.5"D; weight: 23 lbs..Maximum wattage: 3150W; maximum heat energy: 10749 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 125 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 240V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..Portable infrared heater quickly heats up the room and provides you with the much-needed warmth.Single-phase electric wiring.Dimensions: 53"H x 20"W x 17.5"D; weight: 46 lbs..Maximum wattage: 9500W; maximum heat energy: 32414 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 375 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allows easy transport to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 208V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..Portable infrared heater quickly heats up the room and provides you with the much-needed warmth.Single-phase electric wiring.Dimensions: 53"H x 20"W x 17.5"D; weight: 46 lbs..Maximum wattage: 9500W; maximum heat energy: 32414 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 375 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allows easy transport to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 240V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..Portable infrared heater quickly heats up the room and provides you with the much-needed warmth.Single-phase electric wiring.Dimensions: 53"H x 20"W x 17.5"D; weight: 46 lbs..Maximum wattage: 9500W; maximum heat energy: 32414 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 375 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allows easy transport to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 600V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..Portable infrared heater quickly heats up the room and provides you with the much-needed warmth.Single-phase electric wiring.Dimensions: 53"H x 20"W x 17.5"D; weight: 46 lbs..Maximum wattage: 9500W; maximum heat energy: 32414 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 375 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allows easy transport to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 277V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..Portable infrared heater quickly heats up the room and provides you with the much-needed warmth.Single-phase electric wiring.Dimensions: 53"H x 20"W x 17.5"D; weight: 46 lbs..Maximum wattage: 9500W; maximum heat energy: 32414 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 375 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allows easy transport to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 480V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 37.5"H x 20"W x 17.5"D; weight: 32 lbs..Maximum wattage: 4300W; maximum heat energy: 14972 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 150 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allow easy transportation to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 277V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 37.5"H x 20"W x 17.5"D; weight: 32 lbs..Maximum wattage: 4300W; maximum heat energy: 14972 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 150 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allow easy transportation to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 600V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emmiter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 37.5"H x 20"W x 17.5"D; weight: 32 lbs..Maximum wattage: 4300W; maximum heat energy: 14972 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 150 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allow easy transportation to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 480V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 37.5"H x 20"W x 17.5"D; weight: 32 lbs..Maximum wattage: 4300W; maximum heat energy: 14972 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 150 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allow easy transportation to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 240V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 46.25"H x 11.5"W x 14.5"D; weight: 23 lbs..Maximum wattage: 3150W; maximum heat energy: 10749 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 125 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 600V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emmiter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 46.25"H x 11.5"W x 14.5"D; weight: 23 lbs..Maximum wattage: 3150W; maximum heat energy: 10749 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 125 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 480V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 37.5"H x 20"W x 17.5"D; weight: 32 lbs..Maximum wattage: 4300W; maximum heat energy: 14972 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 150 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allow easy transportation to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 208V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The TPI Fostoria® PCH48C 5120 BTU rated portable quartz infrared spot electric heater in black/gold color, has 20-gauge powder coated steel housing for long-life durability. It operates at a voltage rating of 120 V, current rating of 12.5 A and power rating of 1500 W. This stand-mount electric heater features coverage area of up to 150 sq ft. It includes tip-over power cutoff safety switch, ON-OFF rocker switch, height adjustment stand, wire guard, housing knob adjustment, 4-casters, quartz tube, bright aluminum reflector and end caps. It is suitable for portable spot heat or for curing clear coat paint..Dimensions: 24" - 72"H x 53"W x 28"D.Coverage area: 150 sq.ft.BTU: 5120.Voltage: 120 V, current: 12.5 A.Wattage: 1500 W.Connection: 15' long, 3 wire (14/3) cord set with standard 3 prong NEMA 5-20P.Finish: Gold/black, 20-ga powder coated steel housing.Mounting: Stand.Suitable for portable spot heat or for curing clear coat paint.On-Off rocker switch standard.Tip-over power cutoff safety switch.60-deg symmetrical heat pattern.5/8"Dia. quartz tube, average element life is 5000 hours.Bright aluminum reflector and end caps.Includes height adjustment stand, wire guard, housing knob adjustment, 4 casters, On/Off rocker, tip over switches, quartz tube and wire guard.Weight: 30 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Gold/black 5120 BTU 120 V portable quartz infrared spot electric heater is suitable for portable spot heat or for curing clear coat paint and average element life is 5000 hours.