Outdoor Infrared Electric Heaters

Totally safe for familly, friends and relatives. It is ideal for: gazebos, patios, balconies, workshop, garage, etc. Very decorative, it blends beautifully into your environnement..Hanging Infrared Heater.11.02''H x 16.73''D x 16.73''W.Silver.Can be used outdoors and indoors..Very low operating costs.Very easy to install.Uses standard household 120 volt, 60 Hz electrical supply..EnerG+™ HEA-21524 Hanging, outdoor, electric, infrared heater that uses clean and odorless infrared technology.

This adaptable unit can ajust its height from 67” up to 80” with its telescopic pole used and can easily be used indoors as well as outdoors. EnerG + ™ HEA- 21821 SH-T provides two heating levels: 700 – 800 or 1500 Watts when combined heating power. Infrared heat is safe for the environment with zero carbon monoxide or by-product emissions, this radiant energy requires no gas or other flammable fuels and it’s safe for the whole family including pets. EnerG + ™ HEA- 21821 SH-T its made with durable, weatherproof lightweight aluminum, comes with a Tip-Over and Over-Heat protection, and a 70” long power cord..Pole mounted heater.18.11''D x 23.62'' W x 80.71''H.Silver.Adjustable height from 67” to 80”.Heating element lasts about 5,000 hours.Minimal assembly required.Flameless.EnerG + ™ HEA- 21821 SH-T Outdoor standing infrared heater runs on regular household electric current and it plugs into a standard 110/120 Volt outlet and substantially less expensive to operate than propane patio heaters.

Totally safe for familly, friends and relatives. It is ideal for: gazebos, patios, balconies, workshop, garage, etc. Very decorative, it blends beautifully into your environnement..Hanging Infrared Heater.11.02''H x 16.73''D x 16.73''W.Brown.Can be used outdoors and indoors..Very low operating costs.Very easy to install.Uses standard household 120 volt, 60 Hz electrical supply..EnerG+™ HEA-21524 Hanging, outdoor, electric, infrared heater that uses clean and odorless infrared technology.

You can adjust the heat 3 ways: 700, 800 or 1500 Watts. The ambient LED lighting is very convenient at night. We’ve even added a very handy remote control. The HEA-21568 is ideal for: gazebos, patios, balconies, workshop, garage, etc. Very decorative, its square shape blends beautifully into your environment..Hanging Heater With Led and Remote.6.50''H x 20.16''D x 20.16''W.Black.Protected against rain and dust (Certified IP24).User selectable power 700, 800 or 1500 watts.LED ambient lighting.Wireless remote control.The new EnerG +™ HEA-21568 hanging water resistant gazebo infrared heater uses clean and odorless infrared technology so it is totally safe for family, friends and relatives.

Very handy, it uses a standard AC wall outlet. Its infrared heat is hardly influenced by the wind and is totally silent. Designed to give heat where it is needed the most: your feet and legs. The heat then goes up to warm the rest of your body. Safe to use, the surface of the heater uses an exclusive ‘cool touch’ technology and never gets burning hot. Its stylish stainless steel and aluminum finish enhance its very decorative look..Stainless Bistro Table Heater.29.50''H x 23.65''D x 23.65''W.Silver.Water splash safe and dust resistant (IP24 approved).60 cm (23.62 in.) diameter stainless steel table top.High heating power: 1500W.Uses a standard 120 volt, 60 Hz wall outlet.This new water-resistant EnerG + ™ HEA-115J88 bistro table with infrared heat is efficient and economical.

His Tough desing make it perfect for heavy duty environement like construction sites or Garages. Uses radiant infrared energy that requires no gas or other flammable fuels; it can be plugged into a standard 120V AC wall outlet and is water and dust resistant. Infrared heat is safe for the environment with zero carbon monoxide emissions and hardly affected by wind, making this unit cost effective and environmentally friendly..Postable Sturdy Heater.24.41''H x 16.14''D x 14.17''W.Silver and Black.Provides 1500 watts / 5100 BTU of quiet warmth.It plugs into a standard 110 volts outlet.Robust design with protective frame.cETLus certified.This sturdy Portable infrared electric heater from EnerG+™ ushers in a new era in outdoor heating.

The heater tower is covered with cool-touch technology material which makes it safe to the touch. Uses radiant infrared energy that requires no gas or other flammable fuels; it can be plugged into a standard 120V AC wall outlet and is water and dust resistant. Infrared heat is safe for the environment with zero carbon monoxide emissions and hardly affected by wind, making this unit cost effective and environmentally friendly..Round bar table.43.30''H x 23.63''D x 23.63''W.Black.Protected against rain and dust (IP24).Infrared heated tower is covered with Cool Touch Technology®.Two Power Settings: 750W, 1500W.Multi Colored LED deco lighting.This bistro style electric heater table with LED lights and tempered glass top provides 360° of radiant heat; it requires no gas or other flammable fuels.

The TPI Fostoria® OCH46240VSSE 6826 BTU rated quartz electric infrared heater in stainless steel color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 240 V, current rating of 8.3 A and power rating of 2000 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 48"H x 5 3/8"W x 6 1/2"D.BTU: 6826.Voltage: 240 V, current: 8.3 A.Wattage: 2000 W.Connection: Hard wire.Finish: Corrosion resistant stainless steel 24-ga housing.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Weight: 10 lbs..Comes with 1 year warranty.Includes adjustable mounting brackets, vertical mounting brackets, wire guards, bulb, thermostats, SCR controllers and power contactor panels.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Stainless steel 6826 BTU 240 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria OCH46208VSSE 6826 BTU rated quartz electric infrared heater in stainless steel color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 208 V, current rating of 9.6 A and power rating of 2000 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 48"H x 5 3/8"W x 6 1/2"D.BTU: 6826.Voltage: 208 V, current: 9.6 A.Wattage: 2000 W.Connection: Hard wire.Finish: stainless steel.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Must have a field supplied plug.Includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers and power contactor panels.Weight: 10 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Stainless steel 6826 BTU 208 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria® OCH57208VSSE 10239 BTU rated quartz electric infrared heater in stainless steel color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 208 V, current rating of 14.4 A and power rating of 3000 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 59"H x 5 3/8"W x 6 1/2"D.BTU: 10239.Voltage: 208 V, current: 14.4 A.Wattage: 3000 W.Connection: Hard wire.Finish: stainless steel.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Must have a field supplied plug.Includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers and power contactor panels.Weight: 12 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Stainless steel 10239 BTU 208 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria® OCH57240VSSE 10239 BTU rated quartz electric infrared heater in stainless steel color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 240 V, current rating of 12.5 A and power rating of 3000 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 59"H x 5 3/8"W x 6 1/2"D.BTU: 10239.Voltage: 240 V, current: 12.5 A.Wattage: 3000 W.Connection: Hard wire.Finish: stainless steel.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers and power contactor panels.Weight: 12 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Stainless steel 10239 BTU 240 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria OCH46208VSSE 6826 BTU rated quartz electric infrared heater in brown color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 208 V, current rating of 9.6 A and power rating of 2000 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 48"H x 5 3/8"W x 6 1/2"D.BTU: 6826.Voltage: 208 V, current: 9.6 A.Wattage: 2000 W.Connection: Hard wire.Finish: brown.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Must have a field supplied plug.Includes wire guards, thermostats, SCR controllers and power contactor panels.Weight: 10 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 6826 BTU 208 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria® OCH46240VE 6826 BTU rated quartz electric infrared heater in brown color, has high-temperature brown powder coating for long-life durability. It operates at a voltage rating of 240 V, current rating of 8.3 A and power rating of 2000 W. The electric heater includes wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 48"H x 5 3/8"W x 6 1/2"D.BTU: 6826.Voltage: 240 V, current: 8.3 A.Wattage: 2000 W.Connection: Hard wire.Finish: High-temperature brown powder coated.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes wire guards, thermostats, SCR controllers and power contactor panels.Weight: 10 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 6826 BTU 240 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria® OCH46120VSSE 5120 BTU rated quartz electric infrared heater in stainless steel color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 120 V, current rating of 12.5 A and power rating of 1500 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 48"H x 5 3/8"W x 6 1/2"D.BTU: 5120.Voltage: 120 V, current: 12.5 A.Wattage: 1500 W.Connection: Hard wire.Finish: stainless steel.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers and power contactor panels.Weight: 10 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Stainless steel 5120 BTU 120 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria® OCH46120VSSE 5120 BTU rated quartz electric infrared heater in brown color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 120 V, current rating of 12.5 A and power rating of 1500 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 48"H x 5 3/8"W x 6 1/2"D.BTU: 5120.Voltage: 120 V, current: 12.5 A.Wattage: 1500 W.Connection: Hard wire.Finish: brown.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes wire guards, thermostats, SCR controllers and power contactor panels.Weight: 10 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 5120 BTU 120 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria® OCH57208VSSE 10239 BTU rated quartz electric infrared heater in brown color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 208 V, current rating of 14.4 A and power rating of 3000 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 59"H x 5 3/8"W x 6 1/2"D.BTU: 10239.Voltage: 208 V, current: 14.4 A.Wattage: 3000 W.Connection: Hard wire.Finish: brown.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Must have a field supplied plug.Includes wire guards, thermostats, SCR controllers and power contactor panels.Weight: 12 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 10239 BTU 208 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria® OCH57208VCE 6826 BTU rated quartz electric infrared heater in brown color, has high-temperature brown powder coating for long-life durability. It operates at a voltage rating of 208 V, current rating of 9.6 A and power rating of 2000 W. The electric heater includes wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 59"H x 5 3/8"W x 6 1/2"D.BTU: 6826.Voltage: 208 V, current: 9.6 A.Wattage: 2000 W.Connection: Corded.Finish: High-temperature brown powder coated.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Must have a field supplied plug.Includes wire guards, thermostats, SCR controllers and power contactor panels.Weight: 13 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 6826 BTU 208 V outdoor/indoor electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria® OCH57240VSSE 10239 BTU rated quartz electric infrared heater in brown color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 240 V, current rating of 12.5 A and power rating of 3000 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 59"H x 5 3/8"W x 6 1/2"D.BTU: 10239.Voltage: 240 V, current: 12.5 A.Wattage: 3000 W.Connection: Hard wire.Finish: brown.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes wire guards, thermostats, SCR controllers and power contactor panels.Weight: 12 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 10239 BTU 240 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria OCH57240VCE 6826 BTU rated quartz electric infrared heater in brown color, has high-temperature brown powder coating for long-life durability. It operates at a voltage rating of 240 V, current rating of 8.3 A and power rating of 2000 W. The electric heater includes wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 59"H x 5 3/8"W x 6 1/2"D.BTU: 6826.Voltage: 240 V, current: 8.3 A.Wattage: 2000 W.Connection: Corded.Finish: High-temperature brown powder coated.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes wire guards, thermostats, SCR controllers and power contactor panels.Weight: 13 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 6826 BTU 240 V outdoor/indoor electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria® OCH57480VSSE 7679 BTU rated quartz electric infrared heater in stainless steel color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 480 V, current rating of 4.7 A and power rating of 2250 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 59"H x 5 3/8"W x 6 1/2"D.BTU: 7679.Voltage: 480 V, current: 4.7 A.Wattage: 2250 W.Connection: Hard wire.Finish: Corrosion resistant stainless steel 24-ga housing.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers and power contactor panels.Weight: 12 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Stainless steel 7679 BTU 480 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria® OCH57277VSSE 10239 BTU rated quartz electric infrared heater in brown color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 227 V, current rating of 10.8 A and power rating of 3000 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 59"H x 5 3/8"W x 6 1/2"D.BTU: 10239.Voltage: 227 V, current: 10.8 A.Wattage: 3000 W.Connection: Hard wire.Finish: brown.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes wire guards, thermostats, SCR controllers and power contactor panels.cETLus listed.Weight: 12 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 10239 BTU 227 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria® PCH48C 5120 BTU rated portable quartz infrared spot electric heater in black/gold color, has 20-gauge powder coated steel housing for long-life durability. It operates at a voltage rating of 120 V, current rating of 12.5 A and power rating of 1500 W. This stand-mount electric heater features coverage area of up to 150 sq ft. It includes tip-over power cutoff safety switch, ON-OFF rocker switch, height adjustment stand, wire guard, housing knob adjustment, 4-casters, quartz tube, bright aluminum reflector and end caps. It is suitable for portable spot heat or for curing clear coat paint..Dimensions: 24" - 72"H x 53"W x 28"D.Coverage area: 150 sq.ft.BTU: 5120.Voltage: 120 V, current: 12.5 A.Wattage: 1500 W.Connection: 15' long, 3 wire (14/3) cord set with standard 3 prong NEMA 5-20P.Finish: Gold/black, 20-ga powder coated steel housing.Mounting: Stand.Suitable for portable spot heat or for curing clear coat paint.On-Off rocker switch standard.Tip-over power cutoff safety switch.60-deg symmetrical heat pattern.5/8"Dia. quartz tube, average element life is 5000 hours.Bright aluminum reflector and end caps.Includes height adjustment stand, wire guard, housing knob adjustment, 4 casters, On/Off rocker, tip over switches, quartz tube and wire guard.Weight: 30 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Gold/black 5120 BTU 120 V portable quartz infrared spot electric heater is suitable for portable spot heat or for curing clear coat paint and average element life is 5000 hours.

The TPI Fostoria OCH46120VCE 5120 BTU quartz rated electric infrared heater in brown color, has high-temperature brown powder coating for long-life durability. It operates at a voltage rating of 120 V, current rating of 12.5 A and power rating of 1500 W. The electric heater includes wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 48"H x 5 3/8"W x 6 1/2"D.BTU: 5120.Voltage: 120 V, current: 12.5 A.Wattage: 1500 W.Connection: Corded.Finish: High-temperature brown powder coated.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes wire guards, thermostats, SCR controllers and power contactor panels.Weight: 11 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 5120 BTU 120 V outdoor/indoor electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria OCH57480VE 7679 BTU rated quartz electric infrared heater in brown color, has high-temperature brown powder coating for long-life durability. It operates at a voltage rating of 480 V, current rating of 4.7 A and power rating of 2250 W. The electric heater includes wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 59"H x 5 3/8"W x 6 1/2"D.BTU: 7679.Voltage: 480 V, current: 4.7 A.Wattage: 2250 W.Connection: Hard wire.Finish: High-temperature brown powder coated.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes wire guards, thermostats, SCR controllers and power contactor panels.Weight: 12 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 7679 BTU 480 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.

The TPI Fostoria® Heat Wave™ FES10241CA 34130 BTU portable electric salamander heater in yellow color, has steel construction for long-life durability. It operates at a voltage rating of 240 V, current rating of 42 A and power rating of 10 kW. The electric heater features coverage area of up to 547.19 cu ft. It includes 10' cable, straight blade range plug, finned tubular heating elements, magnetic contactor, 10" wheels and high-limit thermal cutout switch/automatic reset. The heater enclosure has safety screens on both air intake and output openings. It is suitable for both indoor and outdoor applications..Dimensions: 39"H x 21"W x 27"D.Coverage area: Up to 547.19 cu.ft.BTU: 34130.Voltage: 240 V, current: 42 A.Wattage: 10 kW, number of phase: 1.Connection: 10' cable & straight blade range plug.Comes in yellow finish with steel construction.Temperature rise: 30 deg F, thermostat adjustment: 40 to 100 deg F.Long-life finned tubular heating elements.Magnetic contactor.High-limit thermal cutout switch/automatic reset.Fan only operation.10" wheels, 800 CFM.Heater enclosure with safety screens on both air intake and output openings.Includes wheels.Weight: 60 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Yellow 34130 BTU 240 V portable electric salamander heater features long-life finned tubular heating elements and high-limit thermal cutout switch / automatic reset.

TPI Fostoria Heat Wave™ FES15241A 51195 BTU rated portable electric salamander heater in yellow color, has steel construction for long-life durability. It includes finned tubular heating elements, magnetic contactor, high-limit thermal cutout switch/automatic reset and 10" wheels. The electric heater operates at a voltage rating of 240 V, current rating of 63 A and power rating of 15 kW. The heater enclosure has safety screens on both air intake and output openings. It is suitable for both indoor and outdoor applications..Dimensions: 39"H x 23"W x 27"D.Coverage area: 4266 sq.ft.BTU: 51195.Voltage: 240 V, current: 63 A.Wattage: 15 kW, number of phase: 1.Connection: 10' cable & straight blade range plug.Comes in yellow finish with steel construction.Temperature rise: 45 deg F, thermostat adjustment: 40 to 100 deg F.Long-life finned tubular heating elements.Magnetic contactor.High-limit thermal cutout switch/automatic reset.Fan only operation.10" wheels, 800 CFM.Heater enclosure with safety screens on both air intake and output openings.Includes wheels.Weight: 69 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Yellow 51195 BTU 240 V portable electric salamander heater features long-life finned tubular heating elements and high-limit thermal cutout switch / automatic reset.

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 37.5"H x 20"W x 17.5"D; weight: 32 lbs..Maximum wattage: 4300W; maximum heat energy: 14972 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 150 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allow easy transportation to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 208V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 46.25"H x 11.5"W x 14.5"D; weight: 23 lbs..Maximum wattage: 3150W; maximum heat energy: 10749 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 125 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 600V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emmiter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 25"H x 11.5"W x 14.5"D; weight: 17 lbs..Maximum wattage: 1450W; maximum heat energy: 4947 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 50 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 120V.Element life expectancy: 25000 hours.Made in the USA.This model is equipped with a 15' cord set with NEMA 5-15 molded plug.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 37.5"H x 20"W x 17.5"D; weight: 32 lbs..Maximum wattage: 4300W; maximum heat energy: 14972 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 150 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allow easy transportation to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 277V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 37.5"H x 20"W x 17.5"D; weight: 32 lbs..Maximum wattage: 4300W; maximum heat energy: 14972 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 150 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allow easy transportation to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 600V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 46.25"H x 11.5"W x 14.5"D; weight: 23 lbs..Maximum wattage: 3150W; maximum heat energy: 10749 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 125 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 277V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emmiter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 46.25"H x 11.5"W x 14.5"D; weight: 23 lbs..Maximum wattage: 3150W; maximum heat energy: 10749 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 125 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 480V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 46.25"H x 11.5"W x 14.5"D; weight: 23 lbs..Maximum wattage: 3150W; maximum heat energy: 10749 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 125 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 240V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 46.25"H x 11.5"W x 14.5"D; weight: 23 lbs..Maximum wattage: 3150W; maximum heat energy: 10749 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 125 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 208V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..Portable infrared heater quickly heats up the room and provides you with the much-needed warmth.Single-phase electric wiring.Dimensions: 53"H x 20"W x 17.5"D; weight: 46 lbs..Maximum wattage: 9500W; maximum heat energy: 32414 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 375 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allows easy transport to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 277V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emitter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 37.5"H x 20"W x 17.5"D; weight: 32 lbs..Maximum wattage: 4300W; maximum heat energy: 14972 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 150 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allow easy transportation to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 240V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..Portable infrared heater quickly heats up the room and provides you with the much-needed warmth.Single-phase electric wiring.Dimensions: 53"H x 20"W x 17.5"D; weight: 46 lbs..Maximum wattage: 9500W; maximum heat energy: 32414 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 375 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allows easy transport to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 480V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emmiter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 37.5"H x 20"W x 17.5"D; weight: 32 lbs..Maximum wattage: 4300W; maximum heat energy: 14972 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 150 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allow easy transportation to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 480V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..Portable infrared heater quickly heats up the room and provides you with the much-needed warmth.Single-phase electric wiring.Dimensions: 53"H x 20"W x 17.5"D; weight: 46 lbs..Maximum wattage: 9500W; maximum heat energy: 32414 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 375 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allows easy transport to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 240V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..Portable infrared heater quickly heats up the room and provides you with the much-needed warmth.Single-phase electric wiring.Dimensions: 53"H x 20"W x 17.5"D; weight: 46 lbs..Maximum wattage: 9500W; maximum heat energy: 32414 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 375 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allows easy transport to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 208V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..Portable infrared heater quickly heats up the room and provides you with the much-needed warmth.Single-phase electric wiring.Dimensions: 53"H x 20"W x 17.5"D; weight: 46 lbs..Maximum wattage: 9500W; maximum heat energy: 32414 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 375 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Heater is mounted on a steel handcart with 6" wheels, which allows easy transport to the job site.Heater operates cleanly, emitting no fumes or odors.Gold-tone anodized aluminum housing for good reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat-panel emitter operates at a radiant efficiency of 78.5% with 600V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

TPI Corporation multipurpose OCH2 Series electric infrared heaters are designed to provide efficient spot heating for many commercial and industrial applications..Quartz electric infrared heater, listed for suspended, totally exposed (outdoor) and indoor spot heating applications, used to heat solid objects, not the air.Output power: 6000W of comforting warmth; maximum BTUs: 20478BTU/h.Dimensions: 7"H x 7.5"W x 66"D.Two frosted quartz tube heating elements (included).Corrosion-resistant 20-gauge stainless steel housing.Gold-anodized aluminum reflector and end caps.Two 2' long mounting chains and four S-Hooks included.Can be wall- or ceiling-mounted using the supplied mounting brackets which allow up to 45-degree horizontal tilt adjustment.Not for residential use.Made in the USA.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm

The multipurpose OCH2 Series electric infrared heater is designed to provide efficient spot heating for many commercial and industrial applications. It can be wall- or ceiling-mounted and has a corrosion-resistant stainless steel housing. The heater provides 60-degree symmetric heat pattern. TPI Corporation produces innovative, industry-leading products for electric heating, fan, and ventilation markets. Anything you need in the industrial, commercial, or residential use..Quartz electric infrared heater is listed for suspended, totally exposed (outdoor), and indoor spot heating applications, it is used to heat solid objects, not the air.Output power: 6000W of comforting warmth; maximum BTUs: 20478 BTU/h.Dimensions: 7"H x 7.5"W x 66"D.Two frosted quartz tube heating elements included.High-temp corrosion-resistant stainless steel 20-gauge housing.Gold anodized aluminum reflector and end caps.Two 2' long mounting chains and four S-hooks included.Can be wall- or ceiling-mounted using the supplied mounting brackets which allow for up to a 45-degree horizontal tilt adjustment.Not for residential use.Made in the USA.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm

TPI Corporation multipurpose OCH2 Series electric infrared heaters are designed to provide efficient spot heating for many commercial and industrial applications..Quartz electric infrared heater, listed for suspended, totally exposed (outdoor) and indoor spot heating applications, used to heat solid objects, not the air.Output power: 6000W of comforting warmth; maximum BTUs: 20478BTU/h.Dimensions: 7"H x 7.5"W x 66"D.Two frosted quartz tube heating elements (included).Corrosion-resistant 20-gauge stainless steel housing.Gold=anodized aluminum reflector and end caps.Two 2' long mounting chains and four S-Hooks included.Can be wall- or ceiling-mounted using the supplied mounting brackets which allow up to 45-degree horizontal tilt adjustment.Not for residential use.Made in the USA.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm

TPI Corporation multipurpose OCH2 Series electric infrared heaters are designed to provide efficient spot heating for many commercial and industrial applications..Quartz electric infrared heater, listed for suspended, totally exposed (outdoor) and indoor spot heating applications, used to heat solid objects, not the air.Output power: 6000W of comforting warmth; maximum BTUs: 20478BTU/h.Dimensions: 7"H x 7.5"W x 66"D.Two frosted quartz tube heating elements (included).20-gauge high-temp brown powder-coated housing.Gold-anodized aluminum reflector and end caps.Two 2' long mounting chains and four S-hooks included.Can be wall- or ceiling-mounted using the supplied mounting brackets which allow up to 45-degree horizontal tilt adjustment.Not for residential use.Made in the USA.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm

TPI Corporation multipurpose OCH2 Series electric infrared heaters are designed to provide efficient spot heating for many commercial and industrial applications..Quartz electric infrared heater, listed for suspended, totally exposed (outdoor) and indoor spot heating applications, used to heat solid objects, not the air.Output power: 6000W of comforting warmth; maximum BTUs: 20478BTU/h.Dimensions: 7"H x 7.5"W x 66"D.Two frosted quartz tube heating elements (included).20-gauge high-temp brown powder-coated housing.Gold-anodized aluminum reflector and end caps.Two 2' long mounting chains and four S-hooks included.Can be wall- or ceiling-mounted using the supplied mounting brackets which allow up to 45-degree horizontal tilt adjustment.Not for residential use.Made in the USA.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm

The multipurpose OCH2 Series electric infrared heater is designed to provide efficient spot heating for many commercial and industrial applications. It can be wall- or ceiling-mounted and has a corrosion-resistant stainless steel housing. The heater provides 60-degree symmetric heat pattern. TPI Corporation produces innovative, industry-leading products for electric heating, fan, and ventilation markets. Anything you need in the industrial, commercial, or residential use..Quartz electric infrared heater is listed for suspended, totally exposed (outdoor), and indoor spot heating applications, it is used to heat solid objects, not the air.Output power: 4000W of comforting warmth; maximum BTUs: 13652 BTU/h.Dimensions: 7"H x 7.5"W x 55"D.Two frosted quartz tube heating elements included.High-temp corrosion-resistant stainless steel 20-gauge housing.Gold anodized aluminum reflector and end caps.Two 2' long mounting chains and four S-hooks included.Can be wall- or ceiling-mounted using the supplied mounting brackets which allow for up to a 45-degree horizontal tilt adjustment.Not for residential use.Made in the USA.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm