Clamp-On Monitor Arms

The Fellowes® Depth Adjustable Monitor Arm adjusts easily in every way for optimum viewing control. Easy to mount – clamp attaches to desktop or through grommet hole. Elevates LCD monitors from 3-½” to 16-½” above the desk. Minimum reach of 2½” to a maximum reach of 21-½”. Tilts up or down +/- 37° and freely swings left or right (360° rotation capability). Mounts to surfaces up to 1-3” thick through grommet holes at least 3 1/4" in diameter; no tools required. Meets VESA mounting standards. Holds LCD monitor up to 24 lbs..Fully adjustable for optimum viewing control.Easy to mount - clamp attaches to desktops 1-3” thick or through grommet holes at least 3-1/4” in diameter.Elevates monitors from 3-1/2” to 16-1/2” above the desk with a reach of 2-1/2”-27”.Tilts up or down +/-37° and freely swings left or right (360° rotation capability).Holds flat panel monitors up to 24 lbs..Meets VESA mounting standards.Dimensions: 21"H x 4.38"W x 24"D.Limited lifetime warranty.Holds a monitor up to 24 lbs.

Maximize your productivity with this six-monitor desk mount, engineered for seamless 3x2 display configurations. It supports up to six 32-inch monitors, each weighing up to 17.6 lb, with full articulation and micro-height adjustments for precise alignment. The dual-column design and wide crossbar ensure long-term stability, while the VESA-compatible mounts allow for tilt, swivel, and 360° rotation. With both C-clamp and grommet mounting options, this durable steel and plastic mount fits a variety of desk setups and includes integrated cable management for a clean, organized workspace. Ideal for control rooms, trading desks, and data-intensive environments..Built as a desk mount with full bundle including clamps, crossbars, columns, and cable clips for multi-monitor use.Supports six monitors up to 32" each with six independent arms for a 3x2 ergonomic layout.Height adjusts from base to 34 inches with micro-height tuning for each row.Finished in white and constructed from durable steel and plastic materials.Allows ±16° pivot, ±34° tilt, ±17° swivel, and 360° rotation for flexible viewing angles.Weighs 30.8 lbs for a stable and secure multi-display setup.Measures 34.0 in (H) × 70.8 in (W) × 4.6 in (D) for full crossbar span and column height.Compatible with VESA 75x75 mm and 100x100 mm mounting patterns.Meets VESA standards and includes cable management for organized workspace compliance

This single monitor mount features a gas spring arm for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor desk mount is designed to save desk space while improving posture by raising the monitor to eye level. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The c-clamp base easily attaches to any desk up to 3” thick, making it an easy addition to any workspace. Fits monitors up to 32” with a weight capacity of 19.8lbs..Single Monitor Desk Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 19.8 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.10-year manufacturer limited warranty

M8.1 supports a better working posture, creates more usable desktop space and helps maintain a clutter-free environment. It offers quick, simple installation and industry-leading flexibility thanks to Quick Release joints that instantly snap together for a secure and robust fit..With innovative features like its Compensator Mechanism and Self-Lubricating Precision Bearings, M8.1 allows users to effortlessly adjust their monitor(s) to their optimal ergonomic position while also providing top-to-bottom cable management..M8.1 features the lowest cost of ownership of any monitor arm, meaning it is the easiest, quickest, and most cost-effective, arm to install and modify for future moves, additions and changes to the workstation. Its durable design also ensures the monitor arm won’t need to be replaced for many years..M8.1’s Smart Stop feature allows the user to stop each joint anywhere along its rotation to prevent monitor or arm overhand on the desk edges. In addition, a built-in Counterbalance Indicator lets the installer counterbalance the monitor weight without a monitor..M8.1 is designed to keep desktops efficient and clutter-free now and in the future. Features include an Accessory Bracket, which supports document holders, headphone holders, whiteboards or whatever wire-shaped accessory you may require at your workspace..M8.1 ships unassembled to reduce packaging size and its modular links allow users to quickly design the most productive space without additional parts – all effectively saving resources, energy and shipping costs to get from factory to office. Humanscale monitor arms are also free of harmful Red List chemicals..M8.1 is compatible with Humanscale’s revolutionary docking station, M/Connect 3, to eliminate desktop cables and provide a more streamlined workspace. It is also compatible with M/Power – a USB Type-A and Type-C charging station that offers convenient, high-speed charging for personal devices..In today’s fast-paced, agile work environment, there’s no time for discomfort. M8.1, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Fully compatible with traditional desks and sit/stand workstations alike, M8.1 meets a variety of configuration needs for single monitors from 6 to 28 pounds or – with an optional crossbar support – dual monitors up to 12 pounds each. Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M8.1 enables the personalization and flexibility needed for today’s evolving workplaces.

Arrange a keyboard, work surface, and two screens to create an ergonomic workstation with this dual-arm stand, which can easily lift monitors up to 20 inches off the desktop. The arms of this Ergotron WorkFit-A dual monitor stand can be used to swivel the whole workstation to either side and to keep screens out of the way when they are not in use..This dual monitor stand with tray and worksurface clamps to the rear or side of most surfaces and enables an effortless sit-and-stand work style.Supports up to 24" monitors for versatile use.Lift range: monitors and keyboard tray adjust 20" in tandem, monitor adjusts 5" independently.Durable, easy-to-clean exterior composed of aluminum, high-grade plastic, and powder-coated painted steel.180-degree pan, 360-degree rotation, and 30-degree tilt adjustment options enable for optimal viewing.Includes a worksurface for additional space and a keyboard tray with three tilt positions that sits below the desktop height for the best ergonomic positioning.Each arm securely holds up to 10 lbs. to fit most monitors (25 lbs. total load on height-adjustment assembly).Overall dimensions: 45.25"H x 28.8"W x 43.7"D (fully extended).Compatible with standard VESA mounting patterns: 100 x 100 and 75 x 75.Meets VESA MIS-D mounting standard.Black/polished aluminum finish completes overall aesthetic appeal.Easily clamps to the front of any surface 0.78–2.6" thick.5-year manufacturer limited warranty.Customize screen viewing for sitting or standing work with this Ergotron WorkFit-A dual monitor stand.

Achieving the perfect desktop setup is about striking a balance between style and functionality. The DMS1000 is designed to do exactly that. Combining industrial influences with a minimalist design, this gas shock monitor mount allows for finger-tip adjustments to be made to the height and orientation of your screen. Raise, tilt, swivel and rotate your monitor on the fly to ensure it’s always in an ideal position. The detachable base provides a seamless connection to your desk, while its easy-to-use clamping mechanism can be secured to any ledge or grommet hole up to 2 inches thick. To ensure a clutter-free setup, the DMS1000 also includes cable management clips to conveniently route your cables..Fits most flat panel computer monitors from 17” to 32”.Supports monitors weighing 3.3 lb (1.5 kg) to 16.5 lb (7.5 kg).Accommodates VESA sizes of 75x75 and 100x100.Ball joint provides a 25° viewing angle in any direction.360° of swivel and monitor rotation for vertical and horizontal screen orientation.Single arm provides up to 23.3” (59.3 cm) of reach.Adjustable tension gas shock system provides 9.5” (24 cm) of fingertip height adjustment.Integrated cable management.Aluminum construction with a painted finish.Installation manual and all monitor mounting hardware for either desk edge or grommet hole installation is included.Two year manufacturer's warranty.Not your average monitor mount.

Turn your workspace into a comfortable and ergonomic environment with the MI-1771 monitor mount. Say goodbye to eye and neck strain and keep your monitor at a comfortable eye-level since this mount is height adjustable up to 13". The heavy-duty design supports up to 20 lbs. with ease. The base comes with a C-clamp that can also be used as a grommet and can be mounted on tables up to 3.3" thick. The arm features clips for cable management to help keep your desk looking clean and tidy. Depending on the user and desk height, this mounting bracket can be used for sit-stand desk applications. Monitor orientation can be changed from landscape to portrait any time necessary..This monitor mount is compatible with VESA patterns 75 x 75 and 100 x 100 and supports LCD and LED displays ranging from 13" to 32"..The monitor mount allows full 360-degree rotation for easy landscape or portrait screen positioning. The screen can be tilted up to 90 degrees upward or downward to reduce glare and achieve optimal viewing angles..The mount installs easily using either a C-clamp or grommet base and fits desks up to 3.3 inches thick..The arm can be raised or lowered up to 13 inches for customizable viewing comfort..The sturdy gas spring arm supports monitors weighing up to 20 pounds..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Transform Your Workspace with the Mount-It! Gas-Spring Single Monitor Desk Mount, Effortless Movement, Maximum Comfort

MI-1772 Dual Monitor Desk Mount is compatible with screens up to 32" on each arm. Clear up desk space and raise your monitors off your desk with this dual monitor desk mount for desk. Full motion arms swivel, tilt, rotate and move up and down to position the monitors just right for you. The gas spring mechanism includes an adjustable counterbalance so that you can make fluid and easy height adjustments to your screen and position your displays in the optimum viewing position. Rotate your screens between portrait and landscape mode to suit your workflow needs. Cable management sleeves offer a clean, clutter-free look so you can utilize your desk space more efficiently. The dual base allows supports clamp or grommet installations..Fits 2 screens from 13" - 32" in size, with a maximum support weight of 20 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Comes with interchangeable C-clamp or grommet base mount for use on desktops.Two monitor stand has counterbalanced, gas spring arms which make adjustments effortless. It has 2 quick-detachable VESA plates for easy mounting and removal of monitors. Comes with integrated cable management and is made out of heavy duty steel and aluminum alloy..Dual monitor arms can tilt up and down 90 degrees, swivel left/right 180 degrees at two joins and a full 360 at another, and raise/lower a total of 13 inches. Both monitors can be rotated into portrait or landscape orientations with easy and will stay in place..Dual monitor mount comes with all mounting hardware, tools, and instructions necessary for assembly. Turn hex bolt on top of gas spring arms to set the counterbalance and hold screens in place..Contemporary contours with a color scheme that will never go out of style.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.This monitor arm mount helps you increase productivity and clear up extra space on your desk.

Our dual monitor mount with full range of motion allows you to tilt, swivel, and rotate the monitor from landscape to portrait position with ease. This dual monitor stand is perfect for cross-referencing work or running multiple programs, so you don't have to keep switching between computer applications. Quick and easy install with the secure clamp, or fixed mount with the included grommet..Raise your monitor to a comfortable viewing height with this monitor mount.Supports screens from 17" to 32" monitors for versatile use.Height adjusts from 8.5" to 19" for comfortable viewing.Made of aluminum, steel, and plastic.Tilt and swivel functions enable adjustments for comfortable viewing.Total weight capacity: 35.2 lbs. (17.6 lbs. per monitor).Compatible with: VESA 75 x 75, 100 x 100 (mm) mounting patterns.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Switch Between Landscape and Portrait Modes Effortlessly, Our MI-2672 dual monitor Mount easily Adjust Your Monitor’s Height, Tilt, and Swivel for Perfect Viewing!

Elevate your monitor to maximize desk space and reduce eye, neck, and shoulder strain. This Fellowes monitor stand is fully height- and depth-adjustable for optimum viewing control and a cost-effective ergonomic solution. The monitor arm features a dual design with built-in cable management to keep you tangle-free. Easy install using the quick fit VESA plate with either a desk clamp (0.38”-3.5” thick ) and grommet (0.44”-2.75” diameter) mount included for secure and easy attachment options. The Reflex experience has seamless adjustability with 360° rotation, 180° swivel, and +/- 45° tilt for optimal viewing angles..MAXIMIZE PRODUCTIVITY: Free up valuable work space for maximum productivity and collaborate with colleagues effortlessly with the Reflex monitor arm.SUPPORTS: Dual monitors up to 30" and 17.6 lbs., optimizing desk space with ergonomic design ideal for home or office.ADJUSTABLE HEIGHT & DEPTH: This fully independent monitor mount by Fellowes is adjustable by height and depth to achieve optimum viewing control and a cost effective ergonomic solution which helps reduce your risk of eye, neck and back strain.EASY INSTALLATION: Effortless installation. Quick-fit VESA plate simplifies monitor installation, ensuring hassle-free setup on desks or tables using clamp or grommet options.GET RID OF YOUR CLUTTER: Reduce clutter in your workspace with the Reflex monitor arm which features an intuitive cable management system which helps keep your cables organized.SPACE-SAVING: Compact and efficient space-saving design to free up valuable workspace.WARRANTY: Extended 5 Year Limited Warranty

Upgrade your workspace with this single monitor arm, designed to provide ergonomic positioning and free up valuable desk space. Unlike bulky built-in stands, this adjustable monitor mount lets you easily set your screen at the ideal height along its 16-inch pole, reducing neck and eye strain for a more comfortable workday. Enjoy full motion flexibility allowing you to find the perfect viewing angle whether you’re working, gaming, or multitasking. The VESA-compatible mount supports monitors up to 32 inches and 19.8 lbs., and its space-saving clamp or grommet base ensures a secure, clutter-free setup. Plus, integrated cable management keeps wires organized for a sleek, professional look..This is an adjustable monitor desk mount designed to support ergonomic screen positioning, and it includes both a C-clamp and grommet mounting base, as well as integrated cable management for a clean and efficient workspace..The mount supports one monitor ranging from 17" to 32" in size. Holds monitors up to 19.8 lbs..The screen can be mounted anywhere along the 16-inch vertical pole to achieve your desired ergonomic height..The item is available in black or white and is made of durable steel..It offers full motion adjustability, including ±160° swivel, +40°/-40° tilt, 360° screen rotation, and flexible pivot positioning to achieve an optimal viewing angle..This mount is VESA-compatible with both 75x75mm and 100x100mm patterns..The mount holds monitors up to 19.8 lbs., making it suitable for most standard and curved screens..Its dual mounting options (clamp or grommet) allow flexible installation on various desk types..Integrated cable management channels keep cords organized and out of sight, supporting a tidy, professional setup..Supported by Limited Lifetime Warranty.From home office to late-night gaming! This monitor arm keeps up with your lifestyle.

MI-45111B dual monitor mount features two gas spring arms for smooth full motion monitor adjustments. The extra long mounting pole measures 20.5”, allowing for a large height adjustment range. From height adjustment, to monitor tilt, swivel and rotation, this monitor desk mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and clearing up more desk space by elevating the monitors. This premium dual monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The c-clamp base easily attaches to any desk measuring.79” to 2.36” thick, making it an easy addition to any workspace. It also includes a grommet base that securely attaches to a desktop hole opening. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Computer Dual Monitor Desk Mount fits most of 13" -27" Screens.Tilt, Swivel, Height Adjustable and Rotating Features.Each monitor can tilt up or down 105 degrees and rotate 360 degrees.Load capacity 39.6 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

This premium dual arm computer monitor mount offers an attractive way to display two monitors while saving the most amount of desk space. The Arm easily adjust , allowing you to work in a more comfortable, ergonomically correct position. Staring at a computer screen that's not eye level can cause neck and eye strain, as well as painful back problems. Our patented, high performance monitor mount offers a wide range of features that our competitors don't offer. You will notice the difference right away. Quality craftsmanship, impressive functionality and unparalleled design raise the bar for this mount to the highest level..Arm easily adjust to support an ergonomically correct workstation; sit more comfortably at your desk while reducing neck, eye and back strain.Bearing weight : 4-19.8 pounds per arm.Dual Display mount to keep your desk and workstation clear.Durable hardware supports clamp or grommet installation.Durable polished aluminum construction

This single monitor desk mount features a full motion arm for smooth monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor mount is designed to position your monitor perfectly for a healthier, more comfortable way to work. Save desk space while improving posture by elevating your monitor off of the desk to eye level. The arm can extend out up to 22.5” for a long reach, great for larger desks or team collaboration. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The c-clamp base fits desks up to 3” thick, making it an easy addition to any workspace. Fits monitor’s up to 32” and can carry up to 19.8lbs..Single Monitor Desk Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 28 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.10-year manufacturer limited warranty

Transform a working surface into an adjustable sit-and-stand workstation using this stand. The keyboard tray offers two tilt positions, so it's easy to find the ideal height for comfortable use behind a monitor. This Ergotron sit-and-stand ergonomic stand supports up to 25 pounds, making it an ideal choice for two 24-inch monitors, and it has 360-degree rotation for quick screen adjustments..This sit-and-stand easy-to-use dual monitor stand with a tray allows you to instantly raise or lower your keyboard and two displays in one simple motion, keeping your system stable as you work.Supports up to 24" monitors for versatile use.Lift range: monitors and keyboard tray adjust 18" in tandem, monitor adjusts 4.8" independently, 22.8'' maximum monitor height adjustment.Durable, easy-to-clean exterior composed of aluminum, high-grade plastic, and powder-coated painted steel.A 360 degree rotation allows monitors to be oriented vertically or horizontally.Includes a worksurface for additional space and a keyboard tray with two tilt positions that sits below the desktop height for the best ergonomic positioning.Each arm securely holds up to 12 lbs. to fit most monitors (25 lbs. total load on height-adjustment assembly).Overall dimensions: 43.5"H x 28"W x 30.2"D (fully extended).Compatible with standard VESA mounting patterns: 75 x 75, 100 x 100.Meets VESA FDMI MIS-D mounting standard.Black finish completes overall aesthetic appeal.Easily clamps to the front of any surface 0.47–2.4" thick.5-year manufacturer limited warranty.Complete Manufacturer Specifications.Perform computing tasks efficiently in comfort with this Ergotron WorkFit-S dual monitor stand.

Raise your monitors at an ergonomic position and free up valuable desk space with this stacked dual monitor mount. This mount is made from high grade steel built to resist scratches and supports screens up to 17.6 lbs each arm and screen size up to 32". This includes clamp and grommet to fit a variety of desktops. Adjustable height, tilt, swivel and rotation functionalities offer optimal viewing angles. Comes with cable management clips to keep your wires organized..Raise your monitor to a comfortable viewing height with this monitor mount.Supports two up to 32" monitors for versatile use.Adjustable height: 16.5"H for each monitor.Made of heavy-duty, cold-rolled steel.-45-45-degree tilt and -180-180-degree rotation adjustment options enable optimal viewing.-180-180-degree rotation allows monitors to be oriented vertically or horizontally.Support up to 17.6 lbs. on each arm: 35.2 lbs. total.Compatible with: VESA 75mm x 75mm and 100mm x 100mm mounting patterns.Clamp or grommet fixation.Cable management.Detachable monitor mounting plate.Comes in black.Supported by manufacturer's limited lifetime warranty

Premium quality adjustable spring assisted articulating monitor arms provide smooth, precise and effortless monitor viewing angle and height adjustment. Rotating VESA plate supports landscape or portrait monitor orientation. Supports two 17" to 32" displays (screen size measured diagonally) weighing up to 17.6 lbs. each. Compatible with VESA mounting patterns 75 x 75 and 100 x 100 mm. Supports 180° arm swivel, tilt angles of +/-90° (up/down), and 90° pan angles (left/right). Both C-clamp and grommet mount bases are included, easily and quickly installs onto most of desks or tables. Removable VESA plate for quick and easy monitor installation. Heavy-duty C-clamp is compatible with desk surfaces from 0.4" to 2" in thickness and grommet mount fits through surface hole from .40" to 2.25" wide and up to 2" thick. Integrated cable management system keeps cables neat, organized, and out of the way..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use.Comes in black and made of aluminum.-90 to 90 degree tilt and -90 to 90-degree rotation adjustment options enable optimal viewing.Two bays organize essentials such as pens, clips, etc..Weighs 11 lbs..Dimensions: 20.6"H x 5.1"W x 40.94"D.Compatible with: VESA 100 x 100mm mounting patterns.Rubber feet protect desk surface.3-year manufacturer limited warranty

Work more effectively and eliminate potential strain with DML1000. This fully adjustable single monitor arm supports monitors up to 22.1 lbs. and tilts, swivels, and rotates 360° for portrait or landscape monitor orientations. A toolless on-the-fly height adjustment system lets you align your monitor with your eyes for improved ergonomics. To save time and reduce frustration, the detachable VESA monitor plate allows you to attach and remove your monitor quickly by sliding it on and off the stand. Included cable management hooks provide a pathway for wiring to keep your workstation tidy and reduce distractions. With desk clamping and grommet mounting options included in the box, you'll be up and running in no time regardless of your setup..IMPROVED ERGONOMICS – Featuring tilt, swivel, and 360° monitor rotation to support portrait or landscape orientations, DML1000 allows you to position your monitor to improve workplace ergonomics..ON-THE-FLY ADJUSTMENTS – A toolless lever allows for easy on-the-fly height adjustments – useful for shared workspaces that accommodate various users..EASY DEPLOYMENT – The detachable VESA monitor plate lets you work on a flat surface instead of supporting your monitor during installation. The plate easily slides onto the stand and can be removed quickly for servicing..CLEAN AESTHETICS – Included cable management hooks keep wires tidy reducing distractions in the workspace.UNIVERSAL COMPATIBILITY – The DML1000 supports 34" monitors weighing up to 22.1 lbs. The stand can be clamped to nearly all desks from 0.4" and 2.8" thick and includes hardware for desk grommet installation.

MI-321116 single monitor desk mount features an articulating arm for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor mount is designed to position your monitor perfectly for a healthier, more comfortable way to work. Save desk space while improving posture by elevating your monitor off of the desk to eye level. The arm can extend out up to 22.5” for a long reach, great for larger desks or team collaboration. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. Features both a c-clamp and grommet base to adapt to multiple desktop surfaces. Heavy-duty aluminum construction fits monitors up to 32” and can hold up to 19.8lbs..Single Monitor Desk Mount fits most of 13" -27" Screens.Tilt, Swivel, Full Motion and Height Adjustable Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 30 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Upgrade your workspace with this single monitor arm, designed to provide ergonomic positioning and free up valuable desk space. Unlike bulky built-in stands, this adjustable monitor mount lets you easily set your screen at the ideal height along its 16-inch pole, reducing neck and eye strain for a more comfortable workday. Enjoy full motion flexibility allowing you to find the perfect viewing angle whether you’re working, gaming, or multitasking. The VESA-compatible mount supports monitors up to 32 inches and 19.8 lbs., and its space-saving clamp or grommet base ensures a secure, clutter-free setup. Plus, integrated cable management keeps wires organized for a sleek, professional look..This is an adjustable monitor desk mount designed to support ergonomic screen positioning, and it includes both a C-clamp and grommet mounting base, as well as integrated cable management for a clean and efficient workspace..The mount supports one monitor ranging from 17" to 32" in size. Holds monitors up to 19.8 lbs..The screen can be mounted anywhere along the 16-inch vertical pole to achieve your desired ergonomic height..The item is available in black or white and is made of durable steel..It offers full motion adjustability, including ±160° swivel, +40°/-40° tilt, 360° screen rotation, and flexible pivot positioning to achieve an optimal viewing angle..This mount is VESA-compatible with both 75x75mm and 100x100mm patterns..The mount holds monitors up to 19.8 lbs., making it suitable for most standard and curved screens..Its dual mounting options (clamp or grommet) allow flexible installation on various desk types..Integrated cable management channels keep cords organized and out of sight, supporting a tidy, professional setup..Supported by Limited Lifetime Warranty.From home office to late-night gaming! This monitor arm keeps up with your lifestyle.

Triple Aluminum Gas Spring C-Clamp Desk Mount - 32"..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use.Made of aluminum.Rotation, swivel, and tilt functions enable adjustments for comfortable viewing.Weighs 21.6 lbs..Dimensions: 60.24"H x 27.56"W x 7.5"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in silver.Rubber feet protect desk surface.2-year manufacturer limited warranty

Premium Quality Durable Gas Spring - Provides smooth, precise and effortless height adjustment for the perfect viewing angle. Universal Fit - Compatible with VESA mounting patterns 75x75 and 100x100, fits most 13" to 32" flat and curved monitors. Full-motion Articulating Monitor Arms - Supports height adjustment up to 25.3", 270° pan swivel, 360° arm swivel, monitor tilt angles of +/- 90° (upward/downward), and +/- 90° (left/right) pan angle. Front Desktop Accessible USB & Audio Connectors - Provides quick access for your USB device and speaker/microphone. Desktop Mounting Options - C-clamp and grommet mount bases are included for easy and quick installation. Detachable and Rotatable VESA Plate - Allows easy monitor installation or removal. Supports portrait or landscape monitor orientation..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use.-90 to 90-degree tilt, -90 to 90-degree pan, and -90 to 90-degree rotation adjustment options enable optimal viewing.Weighs 17.97 lbs..Dimensions: 44.1"H x 25.3"W x 5.75"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in gray.Rubber feet protect desk surface.3-year manufacturer limited warranty

Improve the ergonomics of your dual monitor setup with DML2000. Supporting monitors up to 27", this fully adjustable desktop stand enables positioning of your monitors for improved posture and productivity. Monitor height is achieved with a toolless lever that allows for on-the-fly height adjustments while a micro height adjust feature allows your monitors to be perfectly aligned. To make deployment a snap, the detachable VESA monitor plate gives you the freedom to attach and remove your monitor quickly and easily. This stand can be attached to any desk with its included desk clamp or grommet mount and cable management pathways are provided to keep your workspace distraction free..IMPROVED ERGONOMICS – Featuring tilt, swivel, and 360° monitor rotation to support portrait or landscape orientations, DML2000 allows you to position your dual monitors to improve workplace ergonomics and line-of-sight..ON-THE-FLY ADJUSTMENTS – A toolless lever allow easy on-the-fly height adjustments – useful for shared workspaces that accommodate various users. A micro height adjust feature is included to ensure monitor alignment..EASY DEPLOYMENT – The detachable VESA monitor plate lets you to work on a flat surface instead of supporting your monitor during installation. The plate easily slides onto the stand and can be removed quickly for servicing..CLEAN AESTHETICS – Included cable management hooks keep wires tidy for a professional look and reduces distractions in the workspace..UNIVERSALLY COMPATIBLE – The DML2000 supports dual 27" monitors weighing up to 22.1 lbs. each. The stand can be clamped to nearly all desks from 0.4" to 2.8" thick and includes hardware for desk grommet installation.

The Tripp Lite dual vertical monitor stand is designed to mount two flat-panel displays above the desk, table or workstation's surface to free up the space. You can customize the display's viewing by just one-touch adjustment and is suitable for 15 - 27" front-panel displays. This stand can swivel up to 20 deg, tilt from -20 to 20 deg and rotates 360 deg for convenient viewing. The stand with 20 lbs. capacity, is perfect for home and office use..Dual vertical flat-screen desk stand/clamp mount.Scratch-resistant powder-coated finish blends with any decor.Dimension: 23"H x 17"W x 11"D.-20/+20 Tilt; 360 rotate, 20 swivel.Conforms to VESA-compliant universal mounting hole patterns.One-touch adjustment for easy viewing from multiple angles.Supports displays up to 20 lb. each.Dual mounting plates adjust independently for angle and height.Ideal for home and office use.Compatible with most desks, tables and workstations.Full 360 deg rotation in both portrait and landscape orientations.Comes with 5 year warranty.Dual vertical flat-screen desk stand/clamp mount, 15" to 27" flat-screen displays.

This LCD Monitor Pole with Double-Link Swing Arm provides a secure and elevated position for two flat-screen monitors to help free up valuable desk and work space. It's fully adjustable tilt, rotate, side-to-side, height, and tension settings enable a comfortable and productive viewing position that helps reduce eye fatigue, neck, and back strain. LCD monitors can be easily rotated around the pole to allow others to view presentations and other multimedia from almost any direction. Durable metal construction and a sturdy clamp provide a quick, easy, and secure mount to a desktop or other horizontal surface. Ready to install with included hardware, there's no need to drill holes into desks or countertops. Thus mount is made of high grade steel and aluminum. Fits most LCD monitors 13" to 27". Supports up to 22 lbs. per monitor. Every joint is able to be tightened, so you can adjust exactly how fluid/stationary you want everything, simply remove the cap on the joint and tighten the bolt underneath..Raise your monitor to a comfortable viewing height with this dual monitor desk mount.Supports up to 27" monitors for versatile use.Height-adjustable with two screws holding arms securely on pole.Sturdy aluminum construction features integrated clips and port for cable management.A +80/-80 degree tilt, 180-degree pan, and 360-degree rotation adjustment options enable for optimal viewing.Each arm securely holds up to 22 lbs. to fit most monitors (44 lbs. total load on height-adjustment assembly).Compatible with the standard VESA mounting patterns: 100 x 100 and 75 x 75.Meets VESA MIS-D mounting standard.Black finish completes overall aesthetic appeal.The C-clamp base has an integrated double lock to ensure stable mounting onto any surface up to 4" thick.Supported by manufacturer's limited lifetime warranty

Premium quality durable gas spring assisted full-motion desktop mount provides smooth, precise and effortless viewing height adjustment..Adjustable Monitor Mount.Supports monitors from 13" to 32" and up to 19.8 lbs (9 kgs).Rotate-able VESA plate supports portrait or landscape monitor orientation.Compatible with VESA mounting patterns 75 x 75 and 100 x 100 mm.Ergonomic features include height adjustment from 6.8 inches to 19.5 inches, 360° arm swivel, monitor tilt angles of +/- 90° (upward/downward), and 180° (left/right) pan angle.Both C-clamp and grommet mount bases are included, easily and quickly installs onto most of desks or tables.Detachable VESA panel simplifies installation and attachment of monitors by allowing you to remove the VESA plate from the mounting arm during monitor installation. Simply put it back after installation.Heavy-duty C-clamp is compatible with desk surfaces from 0.4" to 3.3" in thickness and grommet mount fits through surface hole from 3/8" to 2.25" wide and up to 3" thick.Integrated cable management clips conceal cables from sight, create a lean, sleek look after setup