Clear Phone Pouch Cases

The Squids® Can / Bottle Holder & Trap makes it easy to carry and secure your water bottle, spray bottle, aerosol can or other canisters of similar sizes to prevent dropped objects while working at-heights.There is a zinc plated D-ring on the backside that can be used to attach a tool lanyard to complete your tethering system. To keep your hands free, there’s a stainless-steel belt clip on the side to easily attach to a tool belt or fall protection harnesses.The can and bottle holder is made of abrasion-resistant neoprene that stretches to fit 16.9oz. (0.5L) containers including most standard plastic water bottles or even a can of WD40. The adjustable webbing strap can accommodate a variety of bottles and cans, and features a buckle closure system to safely secure them into the holder.Constructed with heavy-gauge nylon stitching for extra reinforcement, the bottle holster is made to take on use and abuse. The open top design makes drinking water a breeze in any situation, whether at-heights or on the ground.Use it as a can or bottle koozie while you’re out on the boat, a spray can holder when you’re in the garage or water bottle sleeve while training for your next race. Whatever it is, we’ve got you covered..Approved to the ANSI/ISEA 121-2018 standard.Neoprene primary material is abrasion-resistant and stretches to fit a variety of bottles/cans.Heavy gauge nylon stitching for extra reinforcement.Convenient stainless steel belt clip attaches to tool belts and fall protection harnesses.Zinc-plated D-ring for tool lanyard attachment.Adjustable buckle closure to securely hold the bottle/can in the holder.Fits standard 16.9oz. (0.5L) water bottles, spray paint cans, WD40 canisters and more.Third party certified to a 2lb (0.9kg) maximum capacity

The Speck Presidio Perfect-Clear MagSafe case is a super-protective, pocket-friendly case. Innovative materials allowed Speck to create a case that stays perfectly clear longer. Highly protective yet slim, this case is pocket-friendly, and is built with precision magnets that work reliably with all Apple MagSafe chargers and accessories. Clearly stylish, but also built tough for life's rough moments with the clear impact technology. Speck's proprietary clear phone-cushioning rubber compresses on impact to protect your phone and resist damage. Naturally, the Presidio Perfect-Clear MagSafe case is real-world tested to withstand drops up to 13'. So, no matter what happens, you can be confident you're protected. The case also features Microban antimicrobial product protection that delivers up to a 99% reduction in stain- and odor-causing bacteria on the case, creating a cleaner surface. Plus, the raised bezel helps protect your screen from scratches, chips, or the dreaded spiderweb shatter if your phone falls and lands facedown..Protect your Apple iPhone 14 Pro with this case that securely envelopes its corners and back.Made of clear polycarbonate and TPU with silver-tone detail.Up to 13' drop protection for extreme durability.Resists scratching and yellowing, keeping your case looking perfectly clear.Designed with precise magnets that are proven to work reliably with all Apple MagSafe accessories.Microban antimicrobial product protection reduces bacteria growth on the case up to 99%.Raised full 360-degree bezel protects the screen.Raised camera ring protects camera lenses.Lifetime manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace

Speck Presidio Perfect-Clear Compatible with MagSafe is the most clear protective case that Speck has designed so far. The innovative materials have allowed Speck to create a case that stays clear longer and provides more protection and durability. Durable yet slim, this case is designed with precise magnets that work with all Apple MagSafe accessories. Not only is this case stylish, but also the clear impact technology makes it tough for rough moments. Speck's proprietary clear phone-cushioning rubber compresses on impact to protect your phone and resist damage, protecting against drops up to 13'. Tested to withstand real-life situations, including extreme drops and chemicals. Additionally, the magnets are separately tested to ensure longevity, reliability, and full compatibility with MagSafe, even if and when you drop your device. It also features an antimicrobial treatment from Microban that delivers a 99% reduction in stain- and odor-causing bacteria on the case, creating a cleaner surface. If that wasn't enough, the case also features a raised bezel. This added edge helps protect your screen from scratching and shattering in case your phone falls and lands facedown..Compatible with iPhone 13 Pro and features built-in magnets that reliably work with all Apple MagSafe accessories.Comes clear and made of polycarbonate.Innovative clear impact technology cushions your phone and resists damage, protecting against drops up to 13'.Coating resists discoloration, and anti-yellowing materials keep your case looking perfectly clear.Raised bezel screen protection is designed to resist screen shatters or cracks for those times when your phone falls and lands facedown.Microban treatment reduces bacteria growth by 99% to protect the case, creating a cleaner surface.Lifetime manufacturer limited warranty.⚠ WARNING:This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects, or other reproductive harm. www.P65Warnings.ca.gov

The Speck Presidio Perfect-Clear MagSafe case is a super-protective, pocket-friendly case. Innovative materials allowed Speck to create a case that stays perfectly clear longer. Highly protective yet slim, this case is pocket-friendly, and is built with precision magnets that work reliably with all Apple MagSafe chargers and accessories. Clearly stylish, but also built tough for life's rough moments with the clear impact technology. Speck's proprietary clear phone-cushioning rubber compresses on impact to protect your phone and resist damage. Naturally, the Presidio Perfect-Clear MagSafe case is real-world tested to withstand drops up to 13'. So, no matter what happens, you can be confident you're protected. The case also features Microban antimicrobial product protection that delivers up to a 99% reduction in stain- and odor-causing bacteria on the case, creating a cleaner surface. Plus, the raised bezel helps protect your screen from scratches, chips, or the dreaded spiderweb shatter if your phone falls and lands facedown..Protect your Apple iPhone 14 Plus with this case that securely envelopes its corners and back.Made of clear polycarbonate and TPU with silver-tone detail.Up to 13' drop protection for extreme durability.Resists scratching and yellowing, keeping your case looking perfectly clear.Designed with precise magnets that are proven to work reliably with all Apple MagSafe accessories.Microban antimicrobial product protection reduces bacteria growth on the case up to 99%.Raised full 360-degree bezel protects the screen.Raised camera ring protects camera lenses.Lifetime manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Speck Presidio Perfect-Clear Compatible with MagSafe is the most clear protective case that Speck has designed so far. The innovative materials have allowed Speck to create a case that stays clear longer and provides more protection and durability. Durable yet slim, this case is designed with precise magnets that work with all Apple MagSafe accessories. Not only is this case stylish, but also the clear impact technology makes it tough for rough moments..Compatible with iPhone 13 and features built-in magnets that reliably work with all Apple MagSafe accessories.Comes clear and made of polycarbonate.Innovative clear impact technology cushions your phone and resists damage, protecting against drops up to 13'.Coating resists discoloration, and anti-yellowing materials keep your case looking perfectly clear.Raised bezel screen protection is designed to resist screen shatters or cracks for those times when your phone falls and lands facedown.Microban treatment reduces bacteria growth by 99% to protect the case, creating a cleaner surface.Lifetime manufacturer limited warranty.⚠ WARNING:This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects, or other reproductive harm. www.P65Warnings.ca.gov

Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace

Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace

3110F(X) Shock absorbing tool lanyard with carabiner on both ends: Designed and tested to prevent falling objects and reduce the force your body sees if a drop occurs by absorbing the energy transmitted through the tool lanyard. By reducing the shock load this design prevents the tool from pulling the user down with it protecting those above as well as those below. (19822).Shock absorbing properties reduce the dynamic force on the body or other anchor point if drop occurs.Durable 1680 denier polyester elastic blended webbing extends from 38" to 70" (96cm - 178cm).Low profile lightweight design reduces snag hazards and added weight.Anodized aluminum alloy carabiners with double action locking gate and inherent captive eye.High strength 3-ply nylon stitching secures connecting ends.Single length construction eliminates weak points seen with multi-component lanyards.Third party certified to a 15lbs (6.8kg) maximum capacity with 2:1 safety factor.Patent pending design

Speck Presidio Perfect-Clear Compatible with MagSafe is the most clear protective case that Speck has designed so far. The innovative materials have allowed Speck to create a case that stays clear longer and provides more protection and durability. Durable yet slim, this case is designed with precise magnets that work with all Apple MagSafe accessories. Not only is this case stylish, but also the clear impact technology makes it tough for rough moments. Speck's proprietary clear phone-cushioning rubber compresses on impact to protect your phone and resist damage, protecting against drops up to 13'. Tested to withstand real-life situations, including extreme drops and chemicals. Additionally, the magnets are separately tested to ensure longevity, reliability, and full compatibility with MagSafe, even if and when you drop your device. It also features an antimicrobial treatment from Microban that delivers a 99% reduction in stain- and odor-causing bacteria on the case, creating a cleaner surface. If that wasn't enough, the case also features a raised bezel. This added edge helps protect your screen from scratching and shattering in case your phone falls and lands facedown..Compatible with iPhone 13 Pro Max and features built-in magnets that reliably work with all Apple MagSafe accessories.Comes clear and made of polycarbonate.Innovative clear impact technology cushions your phone and resists damage, protecting against drops up to 13'.Coating resists discoloration, and anti-yellowing materials keep your case looking perfectly clear.Raised bezel screen protection is designed to resist screen shatters or cracks for those times when your phone falls and lands facedown.Microban treatment reduces bacteria growth by 99% to protect the case, creating a cleaner surface.Lifetime manufacturer limited warranty.⚠ WARNING:This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects, or other reproductive harm. www.P65Warnings.ca.gov

Show off the beauty of your phone without compromising clarity. The Perfect-Clear coating resists discoloration, and anti-yellowing materials keep your case looking perfectly clear. When dropped, the clear impact technology compresses on impact and cushions your phone. The case is proven to absorb shock and resist damage to your device..Show off the beauty of your phone without compromising clarity.Comes in clear color.Innovative no-slip grips on the back of the case provide even more grip for texting and photography.Perfect-Clear coating resists discoloration, and anti-yellowing materials keep your case looking perfectly clear.Microban antimicrobial product protection delivers a 99% reduction in bacterial growth on the case.Up to 13' drop protection with clear impact technology.Lifetime manufacturer limited warranty.⚠ WARNING: This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects, or other reproductive harm. www.P65Warnings.ca.gov

The Speck Presidio Perfect-Clear MagSafe case is a super-protective, pocket-friendly case. Innovative materials allowed Speck to create a case that stays perfectly clear longer. Highly protective yet slim, this case is pocket-friendly, and is built with precision magnets that work reliably with all Apple MagSafe chargers and accessories. Clearly stylish, but also built tough for life's rough moments with the clear impact technology. Speck's proprietary clear phone-cushioning rubber compresses on impact to protect your phone and resist damage. Naturally, the Presidio Perfect-Clear MagSafe case is real-world tested to withstand drops up to 13'. So, no matter what happens, you can be confident you're protected. The case also features Microban antimicrobial product protection that delivers up to a 99% reduction in stain- and odor-causing bacteria on the case, creating a cleaner surface. Plus, the raised bezel helps protect your screen from scratches, chips, or the dreaded spiderweb shatter if your phone falls and lands facedown..Protect your Apple iPhone 14 Pro Max with this case that securely envelopes its corners and back.Made of clear polycarbonate and TPU with silver-tone detail.Up to 13' drop protection for extreme durability.Resists scratching and yellowing, keeping your case looking perfectly clear.Designed with precise magnets that are proven to work reliably with all Apple MagSafe accessories.Microban antimicrobial product protection reduces bacteria growth on the case up to 99%.Raised full 360-degree bezel protects the screen.Raised camera ring protects camera lenses.Lifetime manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Speck Presidio Perfect-Clear MagSafe with ClickLock no-slip interlock technology case is a clear protective case that features 13' drop protection, is made from 50% recycled plastics, has Microban antimicrobial product protection, and is specifically built to enhance the Apple MagSafe experience..Protective case for iPhone 15.Built with precise magnets specifically to work with all Apple MagSafe accessories.Made from 50% recycled plastics in clear with chrome accents.Up to 13' drop protection for extreme durability with Presidio 2 Armor Cloud technology that cushions and protects your phone like an airbag.ClickLock no-slip interlock technology has a bolt that locks accessories onto your phone or your phone into place, creating less friction and therefore less chance of slippage.Enhanced ultra-responsive buttons for smoother clicks and volume control.Nonslip inverted grips are durable and provide long-lasting grip.Soft-touch finish for a better look, enhanced feel, and added scratch resistance.Microban reduces bacterial growth up to 99% to protect the case, creating a cleaner surface.Raised bezels keep your phone's screen off damaging surfaces.Lifetime manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace

The Speck Presidio Perfect-Clear MagSafe with ClickLock no-slip interlock technology case is a clear protective case that features 13' drop protection, is made from 50% recycled plastics, has Microban antimicrobial product protection, and is specifically built to enhance the Apple MagSafe experience..Protective case for iPhone 15 Pro Max.Built with precise magnets specifically to work with all Apple MagSafe accessories.Made from 50% recycled plastics in clear with chrome accents.Up to 13' drop protection for extreme durability with Presidio 2 Armor Cloud technology that cushions and protects your phone like an airbag.ClickLock no-slip interlock technology has a bolt that locks accessories onto your phone or your phone into place, creating less friction and therefore less chance of slippage.Enhanced ultra-responsive buttons for smoother clicks and volume control.Nonslip inverted grips are durable and provide long-lasting grip.Soft-touch finish for a better look, enhanced feel, and added scratch resistance.Microban reduces bacterial growth up to 99% to protect the case, creating a cleaner surface.Raised bezels keep your phone's screen off damaging surfaces.Lifetime manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The Squids® 3796 Power Tool Bracket for Drill & Impact Drivers creates a unique tool attachment point to tether cordless drills, impact drivers and other power tools with a tool lanyard. Connection points for tool lanyards are not always readily available on power tools, which can create hazardous environments while working at-heights. Tethering your tools should be a part of an overall fall protection plan to reduce the risk of dropped objects and increase workplace safety. The stainless-steel tool bracket comes complete with a set of six metric fasteners (M2.5, M3, M4) to mount to a variety of power tools from brands including Bosch, Milwaukee, Makita, DeWalt and many others.STRAIGHTFORWARD INSTALLATION The one-time assembly creates a quick and easy one-step attachment to tether a lanyard to your power tools. Simply fasten the included tool bracket and labels onto screw ports intended for accessory belt hooks. Once the appropriate torque is applied to the anchor point, connect a tool lanyard to the bracket tether point to safely and securely tether tools. PERFECT FOR TOOLS WITH SCREW PORTSThe Power Tool Bracket for Drills and Impact Drivers is the perfect solution for smaller 12v. cordless power tools that cannot be wrapped by Squids® 3180 Power Tool Wraps. The patent-pending design will retrofit tools up to 3lbs. (1.36kg.) depending the fastener size used. Though intended for cordless drills and cordless impact drivers, these brackets can also fasten to cameras, laser alignment tools and other tools and devices that have screw ports to fit M2.5, M3 and M4 fasteners..Approved to the ANSI/ISEA 121-2018 standard.Stainless-steel bracket with built-in connection point for tool tethering is corrosion-resistant to withstand weathering.Patent-pending tool bracket design discretely fastens to open screw port on cordless drills/drivers so you barely notice it’s there.Set includes 1 bracket connection point, 6 fasteners with locking washers and 2 product labels.Perfect for smaller, cylindrical 12v. drills and impact drivers or other power tools where traditional retrofit attachments are not compatible.Ambidextrous design can be flipped to either side of the tool attaching to open screw ports meant for accessory belt clips.Fasteners include alloy steel M2.5 (8mm length) socket cap head, 2 stainless-steel M3 (8mm and 12mm lengths) Philips pan heads, and 3 stainless steel M4 (8mm, 10mm, 12mm lengths) Philips pan heads.Maximum tethering capacity of 2.5lbs. (1.13kg) for the M2.5 fastener and 3lbs. (1.36kg) for M3 and M4 fasteners