Clear Phone Pouch Cases

The Squids® Can / Bottle Holder & Trap makes it easy to carry and secure your water bottle, spray bottle, aerosol can or other canisters of similar sizes to prevent dropped objects while working at-heights.There is a zinc plated D-ring on the backside that can be used to attach a tool lanyard to complete your tethering system. To keep your hands free, there’s a stainless-steel belt clip on the side to easily attach to a tool belt or fall protection harnesses.The can and bottle holder is made of abrasion-resistant neoprene that stretches to fit 16.9oz. (0.5L) containers including most standard plastic water bottles or even a can of WD40. The adjustable webbing strap can accommodate a variety of bottles and cans, and features a buckle closure system to safely secure them into the holder.Constructed with heavy-gauge nylon stitching for extra reinforcement, the bottle holster is made to take on use and abuse. The open top design makes drinking water a breeze in any situation, whether at-heights or on the ground.Use it as a can or bottle koozie while you’re out on the boat, a spray can holder when you’re in the garage or water bottle sleeve while training for your next race. Whatever it is, we’ve got you covered..Approved to the ANSI/ISEA 121-2018 standard.Neoprene primary material is abrasion-resistant and stretches to fit a variety of bottles/cans.Heavy gauge nylon stitching for extra reinforcement.Convenient stainless steel belt clip attaches to tool belts and fall protection harnesses.Zinc-plated D-ring for tool lanyard attachment.Adjustable buckle closure to securely hold the bottle/can in the holder.Fits standard 16.9oz. (0.5L) water bottles, spray paint cans, WD40 canisters and more.Third party certified to a 2lb (0.9kg) maximum capacity

Show off the beauty of your phone without compromising clarity. The Perfect-Clear coating resists discoloration, and anti-yellowing materials keep your case looking perfectly clear. When dropped, the clear impact technology compresses on impact and cushions your phone. The case is proven to absorb shock and resist damage to your device..Show off the beauty of your phone without compromising clarity.Comes in clear color.Innovative no-slip grips on the back of the case provide even more grip for texting and photography.Perfect-Clear coating resists discoloration, and anti-yellowing materials keep your case looking perfectly clear.Microban antimicrobial product protection delivers a 99% reduction in bacterial growth on the case.Up to 13' drop protection with clear impact technology.Lifetime manufacturer limited warranty.⚠ WARNING: This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects, or other reproductive harm. www.P65Warnings.ca.gov

Presidio Perfect-Clear is a clear protective case. Innovative materials have allowed Speck to create a case that stays clear longer and provides more protection and durability. Durable yet slim, this case is designed with precise magnets that work with all Apple MagSafe accessories. Not only is this case stylish, but clear impact technology makes it tough for rough moments. The proprietary, clear phone-cushioning rubber compresses on impact to protect your phone and resist damage, protecting against drops up to 13'. Tested to withstand real-life situations, including extreme drops and chemicals. Additionally, magnets are separately tested to ensure longevity, reliability, and full compatibility with MagSafe, even if and when you drop your device. It also has a built-in antimicrobial treatment from Microban that delivers a 99% reduction in stain- and odor-causing bacteria on the case, creating a cleaner surface. If that wasn't enough, it also features a raised bezel. This added edge helps protect your screen from scratching and shattering if your phone falls and lands facedown..Protect your Apple iPhone 12 and 12 Pro with this case that securely encases the corners and back.Features clear rubber construction for added durability.Innovative clear impact technology cushions your phone and resists damage, protecting against drops up to 13'.Coating resists discoloration, and anti-yellowing materials keep your case looking perfectly clear.Designed with precise magnets that are proven to work reliably with all Apple MagSafe accessories.Microban reduces bacteria growth by 99% to protect the case creating a cleaner surface.Raised bezel screen protection.Lifetime manufacturer limited warranty.⚠ WARNING:This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects, or other reproductive harm. www.P65Warnings.ca.gov

Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace

Presidio Perfect-Clear is Speck's most clear protective case. Its innovative materials have allowed Speck to create a case that stays clear longer and provides more protection and durability. Not only is this case stylish, but the clear impact technology makes it as strong as nails. Speck's proprietary clear phone-cushioning rubber compresses on impact to protect your phone and resist damage. Tested to withstand real-life situations, including extreme drops, chemicals, and antenna interference. It also features an antimicrobial treatment from Microban that delivers a 99% reduction in stain- and odor-causing bacteria on the case, creating a cleaner surface. If that wasn't enough, it also features a raised bezel. This added edge helps protect your screen from scratching and shattering if your phone falls and lands face down..This case offers protection for iPhone 11 Pro Max.Made of clear plastic.Up to 13′ drop protection for extreme durability.Case is fully scratch-resistant and prevents unsightly scrapes and discoloration.Microban antimicrobial technology reduces bacterial growth to protect the case, creating a cleaner surface.Lifetime manufacturer limited warranty.⚠ WARNING: This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects, or other reproductive harm. www.P65Warnings.ca.gov

3110F(X) Shock absorbing tool lanyard with carabiner on both ends: Designed and tested to prevent falling objects and reduce the force your body sees if a drop occurs by absorbing the energy transmitted through the tool lanyard. By reducing the shock load this design prevents the tool from pulling the user down with it protecting those above as well as those below. (19822).Shock absorbing properties reduce the dynamic force on the body or other anchor point if drop occurs.Durable 1680 denier polyester elastic blended webbing extends from 38" to 70" (96cm - 178cm).Low profile lightweight design reduces snag hazards and added weight.Anodized aluminum alloy carabiners with double action locking gate and inherent captive eye.High strength 3-ply nylon stitching secures connecting ends.Single length construction eliminates weak points seen with multi-component lanyards.Third party certified to a 15lbs (6.8kg) maximum capacity with 2:1 safety factor.Patent pending design

Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace

Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace

Presidio Perfect-Clear with Grips is a case that stays clear longer and provides more protection and durability. It also features the iconic no-slip grips that are built to give you more confidence when texting or taking photos. Not only is this case stylish, but the clear impact technology makes it strong as nails. The proprietary, clear phone-cushioning rubber compresses on impact to protect your phone and resist damage. This case has been tested in the real world to withstand drops of up to 13', so you'll be confident knowing your phone will be protected..This case offers protection for iPhone 11.Made from clear plastic.No-slip grips for more confidence when texting, talking, or taking photos.Up to 13′ drop protection for extreme durability.Case is fully scratch-resistant, prevents unsightly scrapes and discoloration.Microban antimicrobial technology reduces bacteria growth to protect the case creating a cleaner surface.Lifetime manufacturer limited warranty.⚠ WARNING: This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects, or other reproductive harm. www.P65Warnings.ca.gov

The Squids® 3796 Power Tool Bracket for Drill & Impact Drivers creates a unique tool attachment point to tether cordless drills, impact drivers and other power tools with a tool lanyard. Connection points for tool lanyards are not always readily available on power tools, which can create hazardous environments while working at-heights. Tethering your tools should be a part of an overall fall protection plan to reduce the risk of dropped objects and increase workplace safety. The stainless-steel tool bracket comes complete with a set of six metric fasteners (M2.5, M3, M4) to mount to a variety of power tools from brands including Bosch, Milwaukee, Makita, DeWalt and many others.STRAIGHTFORWARD INSTALLATION The one-time assembly creates a quick and easy one-step attachment to tether a lanyard to your power tools. Simply fasten the included tool bracket and labels onto screw ports intended for accessory belt hooks. Once the appropriate torque is applied to the anchor point, connect a tool lanyard to the bracket tether point to safely and securely tether tools. PERFECT FOR TOOLS WITH SCREW PORTSThe Power Tool Bracket for Drills and Impact Drivers is the perfect solution for smaller 12v. cordless power tools that cannot be wrapped by Squids® 3180 Power Tool Wraps. The patent-pending design will retrofit tools up to 3lbs. (1.36kg.) depending the fastener size used. Though intended for cordless drills and cordless impact drivers, these brackets can also fasten to cameras, laser alignment tools and other tools and devices that have screw ports to fit M2.5, M3 and M4 fasteners..Approved to the ANSI/ISEA 121-2018 standard.Stainless-steel bracket with built-in connection point for tool tethering is corrosion-resistant to withstand weathering.Patent-pending tool bracket design discretely fastens to open screw port on cordless drills/drivers so you barely notice it’s there.Set includes 1 bracket connection point, 6 fasteners with locking washers and 2 product labels.Perfect for smaller, cylindrical 12v. drills and impact drivers or other power tools where traditional retrofit attachments are not compatible.Ambidextrous design can be flipped to either side of the tool attaching to open screw ports meant for accessory belt clips.Fasteners include alloy steel M2.5 (8mm length) socket cap head, 2 stainless-steel M3 (8mm and 12mm lengths) Philips pan heads, and 3 stainless steel M4 (8mm, 10mm, 12mm lengths) Philips pan heads.Maximum tethering capacity of 2.5lbs. (1.13kg) for the M2.5 fastener and 3lbs. (1.36kg) for M3 and M4 fasteners

Speck Presidio Perfect-Clear Compatible with MagSafe is the most clear protective case that Speck has designed so far. The innovative materials have allowed Speck to create a case that stays clear longer and provides more protection and durability. Durable yet slim, this case is designed with precise magnets that work with all Apple MagSafe accessories. Not only is this case stylish, but also the clear impact technology makes it tough for rough moments. Speck's proprietary clear phone-cushioning rubber compresses on impact to protect your phone and resist damage, protecting against drops up to 13'. Tested to withstand real-life situations, including extreme drops and chemicals. Additionally, the magnets are separately tested to ensure longevity, reliability, and full compatibility with MagSafe, even if and when you drop your device. It also features an antimicrobial treatment from Microban that delivers a 99% reduction in stain- and odor-causing bacteria on the case, creating a cleaner surface. If that wasn't enough, the case also features a raised bezel. This added edge helps protect your screen from scratching and shattering in case your phone falls and lands facedown..Compatible with iPhone 13 Pro and features built-in magnets that reliably work with all Apple MagSafe accessories.Comes clear and made of polycarbonate.Innovative clear impact technology cushions your phone and resists damage, protecting against drops up to 13'.Coating resists discoloration, and anti-yellowing materials keep your case looking perfectly clear.Raised bezel screen protection is designed to resist screen shatters or cracks for those times when your phone falls and lands facedown.Microban treatment reduces bacteria growth by 99% to protect the case, creating a cleaner surface.Lifetime manufacturer limited warranty.⚠ WARNING:This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects, or other reproductive harm. www.P65Warnings.ca.gov

The Squids® 3798 Power Tool Bracket for Pneumatic Tools creates a unique tool attachment point to tether air/pneumatic power tools with a tool lanyard. Connection points for tool lanyards are not always readily available on power tools, which can create hazardous environments while working at heights if they are not tethered. Tethering your tools should be a part of an overall fall protection plan to reduce the risk of dropped objects and increase workplace safety.STRAIGHTFORWARD INSTALLATIONThe one-time assembly, creates a quick and easy one-step attachment to tether a lanyard to your pneumatic power tools. Simply fasten the included stainless-steel tool bracket and label with the coupler for the tool’s air hose connection (coupler and air hose not included). Once the coupler is threaded through the label and bracket and fastened securely to the air powered tool, the bracket will give a 360-degree rotating connection point for tool lanyards to safely and securely tether tools. PERFECT FOR AIR POWERED TOOLSThe Power Tool Bracket for Air/Pneumatic Tools is the perfect solution for smaller angle grinders, palm sanders, handheld buffers, pneumatic staplers, pneumatic nail guns, pneumatic rivet guns, and other air powered tools weighing up to 5lbs. (2.27kg.)..Approved to the ANSI/ISEA 121-2018 standard.Stainless-steel bracket with built-in connection point for tool tethering is corrosion-resistant to withstand weathering.Patent-pending tool bracket design fastens onto pneumatic/air powered tools using the tool’s air hose coupler.Set includes 1 bracket connection point and 1 product label.Perfect for a variety of pneumatic tools using an air hose like angle grinders, paddle sanders, handheld buffers, nailers, staplers and rivet guns.Fits couplers ranging in size from 1/4” (6.3mm) to 3/8” (9.5mm).Maximum tethering capacity of 5lbs. (2.26kg.)

Speck Presidio Perfect-Clear + Ombre is a clear protective case. It features bold and stylish ombre patterns that are sure to bring style to your device. The innovative new materials have allowed Speck to create a case that stays clear longer and provides more protection and durability. Not only is this case stylish, but the clear impact technology makes it strong as nails. The proprietary, clear phone-cushioning rubber compresses on impact to protect your phone and resist damage. This case has been tested in the real world to withstand drops of up to 13', so you'll be confident knowing your phone will be protected. Durable yet slim, this case allows for easy wireless charging with MagSafe and Qi for a seamless charge..Protect your Apple iPhone 12 and 12 Pro with this case that securely encases the corners and back.Features clear and atmosphere fade rubber construction for added durability.Innovative clear impact technology cushions your phone and resists damage, protecting against drops up to 13'.Perfect-Clear coating resists discoloration, and anti-yellowing materials keep your case looking perfectly clear.Designed to be thin enough to allow for easy wireless charging while the case is still on your phone.Built-in antimicrobial treatment from Microban that delivers a 99% reduction in stain- and odor-causing bacteria on the case, creating a cleaner surface.Raised bezel screen protection.Lifetime manufacturer limited warranty.⚠ WARNING:This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects, or other reproductive harm. www.P65Warnings.ca.gov

Speck Presidio Perfect-Clear Compatible with MagSafe is the most clear protective case that Speck has designed so far. The innovative materials have allowed Speck to create a case that stays clear longer and provides more protection and durability. Durable yet slim, this case is designed with precise magnets that work with all Apple MagSafe accessories. Not only is this case stylish, but also the clear impact technology makes it tough for rough moments..Compatible with iPhone 13 and features built-in magnets that reliably work with all Apple MagSafe accessories.Comes clear and made of polycarbonate.Innovative clear impact technology cushions your phone and resists damage, protecting against drops up to 13'.Coating resists discoloration, and anti-yellowing materials keep your case looking perfectly clear.Raised bezel screen protection is designed to resist screen shatters or cracks for those times when your phone falls and lands facedown.Microban treatment reduces bacteria growth by 99% to protect the case, creating a cleaner surface.Lifetime manufacturer limited warranty.⚠ WARNING:This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects, or other reproductive harm. www.P65Warnings.ca.gov

Speck Presidio Perfect-Clear Compatible with MagSafe is the most clear protective case that Speck has designed so far. The innovative materials have allowed Speck to create a case that stays clear longer and provides more protection and durability. Durable yet slim, this case is designed with precise magnets that work with all Apple MagSafe accessories. Not only is this case stylish, but also the clear impact technology makes it tough for rough moments. Speck's proprietary clear phone-cushioning rubber compresses on impact to protect your phone and resist damage, protecting against drops up to 13'. Tested to withstand real-life situations, including extreme drops and chemicals. Additionally, the magnets are separately tested to ensure longevity, reliability, and full compatibility with MagSafe, even if and when you drop your device. It also features an antimicrobial treatment from Microban that delivers a 99% reduction in stain- and odor-causing bacteria on the case, creating a cleaner surface. If that wasn't enough, the case also features a raised bezel. This added edge helps protect your screen from scratching and shattering in case your phone falls and lands facedown..Compatible with iPhone 13 Pro Max and features built-in magnets that reliably work with all Apple MagSafe accessories.Comes clear and made of polycarbonate.Innovative clear impact technology cushions your phone and resists damage, protecting against drops up to 13'.Coating resists discoloration, and anti-yellowing materials keep your case looking perfectly clear.Raised bezel screen protection is designed to resist screen shatters or cracks for those times when your phone falls and lands facedown.Microban treatment reduces bacteria growth by 99% to protect the case, creating a cleaner surface.Lifetime manufacturer limited warranty.⚠ WARNING:This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects, or other reproductive harm. www.P65Warnings.ca.gov

Ergodyne® Squids® Black grabber with belt clip features dielectric or non-conductive material construction which clips to belts, tool belts and pants. Patented pattern grabber made of ultra-resilient acetal copolymer offers long lasting durability..Grabber-Belt Clip.Clips to belts, tool belts, pants and other clothing.Color: Black.6 per carton.Detachable, usable with 'beeners, D-rings, etc..Breakaway feature.Dielectric / non-conductive material.Durable, ultra-resilient acetal copolymer.Black.Connection: Belts, tool belts, pants, other clothing and D-rings.Material: Dielectric/ultra-resilient acetal copolymer material.Detachable, usable with beeners, D-rings, etc.Non-conductive, lightweight wonderclips offer safety-conscious advanced grabology.Ergodyne® Squids® Black grabber with belt clip has breakaway feature that is perfect for roofing, construction, warehousing, maintenance, mechanics, HVAC, plumbing, mitten security, mining, carpentry, electrician, contractors, oil and gas.