Copper Ethernet Cable

The 4XEM™ 25' blue RJ-45 Cat6 molded UTP patch cable is perfect for high performance networking applications. It has one RJ-45 male connector on both ends for connectivity. The snagless design safeguards the locking tabs on the RJ45 connectors from damage during installation. It has molded-strain relief construction for longer life and features copper conductor for high electrical conductivity. This molded PVC cable supports 500 MHz/1 Gbps data communication..Cat6 molded UTP patch cable for network device and notebook.Cable length: 25'.Connections: One RJ-45 male connector on both ends.CMG rated PVC jacket for added durability and 4-pair 24 AWG stranded copper conductor for excellent signal transmission.Meets IEEE 802.3ab, IEEE 802.5 and TIA/EIA-568-B.1-2001 T568B certification or standards.Comes in blue color.Features molded connectors with integral strain relief for added durability.Bandwidth: Rated for 500 MHz/1 Gbps communication.Snagless design aids to protect the locking tabs on the RJ45 connectors from damage or snap-off while installing.Comes with limited lifetime warranty

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..This patch cable is perfect for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications.Designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk; comes in blue.50 cables per pack.Supports 10 Gigabit Ethernet networks up to 180' for fast data transmission and maximum performance and 1 Gigabit Ethernet networks up to 328'.Snagless connector design for high-density environments and protecting the RJ45 connector's lock.Meets or exceeds the EIA/TIA TSB-40 CAT-6 standards.Cable length is 10'

The C2G ® 7' orange Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 7'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in orange color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty.StarTech.com® HDMM10 10' HDMI Cable with ultra HD male/male HDMI connectors supports 4k x 2k video signal. Offers multimedia interface with clear audio/video signal.

The N201-001-PU Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this one-foot purple cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. Manufactured from 24 AWG copper wire and protected by a rugged PVC jacket, the four-pair stranded UTP N201-001-PU delivers speeds up to 550 MHz/1 Gbps with minimal near-end crosstalk (NeXT)..Rated for 550 MHz/1 Gbps communications.Snagless RJ45 connectors protect against broken tabs.Meets Cat6 TIA/EIA standards.High-quality 24 AWG stranded copper wire.Reduces impedance and structural return loss.Certification and Standards: RoHS

The C2G ® 1' male/male Cat6 blue snagless shielded Ethernet network patch cable with PVC jacket, truncates both impedance and structural return loss. The 24-AWG bare copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. It safeguards high-speed network from noise and electromagnetic interference. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. It has aluminum foil shielding to get rid of EMI/RFI interference to ensure reliable error-free data communications. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable modem, patch panel and other high performance networking applications in high noise environments..Network patch cable safeguards high speed network from noise and electromagnetic interference.Cable length: 1'.Connections: one RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 26 AWG stranded bare copper conductors for excellent signal transmission.Meets ANSI/TIA 568 C.2, CE standards and certifications.Contact material: 50 micron gold-plated, Shell: Nickel plated for shieldingCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments.Comes in blue color.Voltage rating: 30 V.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 75 deg C.Offers immense protection from EMI/RFI interference.High quality cable and plugs construction minimizes near-end crosstalk (NEXT) levels.Weight: 0.05 lbs..Comes with lifetime warranty

The C2G 10' red Cat5e snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with FR-PVC jacket truncates both impedance and structural return loss. The cable features 24 AWG stranded bare copper conductor, which minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modem DSL/cables, patch panels and other high-performance networking applications..Category 5e for Network Device.RJ-45 Male.10ft.Red.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, EIA/TIA 568B.2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.23 lbs..Comes with lifetime warranty

The 4XEM™ 50' blue RJ-45 Cat6 molded UTP patch cable is perfect for high performance networking applications. It has one RJ-45 male connector on both ends for connectivity. The snagless design safeguards the locking tabs on the RJ45 connectors from damage during installation. It has molded-strain relief construction for longer life and features copper conductor for high electrical conductivity. This molded PVC cable supports 500 MHz/1 Gbps data communication..Cat6 molded UTP patch cable for network device and notebook.Cable length: 50'.Connections: One RJ-45 male connector on both ends.CMG rated PVC jacket for added durability and 4-pair 24 AWG stranded copper conductor for excellent signal transmission.Meets IEEE 802.3ab, IEEE 802.5 and TIA/EIA-568-B.1-2001 T568B certification or standards.Comes in blue color.Features molded connectors with integral strain relief for added durability.Bandwidth: Rated for 500 MHz/1 Gbps communication.Snagless design aids to protect the locking tabs on the RJ45 connectors from damage or snap-off while installing.Comes with limited lifetime warranty

This C2G 50' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable has a PVC jacket, and it truncates both impedance and structural return loss. It features a 24 AWG stranded bare copper conductor and minimizes near-end crosstalk levels. This patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, and patch panels and is useful for high performance networking applications..Cable length: 50'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 1.38 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Kensington Technology Mobile Tablets Blue Kensington Trapper Keeper Universal Case - Designed with a mead-inspired style

The 4XEM™ 100' blue RJ-45 Cat6 molded UTP patch cable is perfect for high performance networking applications. It has one RJ-45 male connector on both ends for connectivity. The snagless design safeguards the locking tabs on the RJ45 connectors from damage during installation. It has molded-strain relief construction for longer life and features copper conductor for high electrical conductivity. This molded PVC cable supports 500 MHz/1 Gbps data communication..Cat6 molded UTP patch cable for network device and notebook.Cable length: 100'.Connections: One RJ-45 male connector on both ends.CMG rated PVC jacket for added durability and 4-pair 24 AWG stranded copper conductor for excellent signal transmission.Meets IEEE 802.3ab, IEEE 802.5 and TIA/EIA-568-B.1-2001 T568B certification or standards.Comes in blue color.Features molded connectors with integral strain relief for added durability.Bandwidth: Rated for 500 MHz/1 Gbps communication.Snagless design aids to protect the locking tabs on the RJ45 connectors from damage or snap-off while installing.Comes with limited lifetime warranty

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all CAT-6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..CAT-6 snagless unshielded (UTP) ethernet network patch cable is designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Cable length: 5'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.Snagless connector design for high density environments and protecting the RJ-45 connector's lock.Supports 10 Gigabit networks up to 180' for fast data transmission and maximum performance and supports 1 Gigabit up to 328'.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk.Meets all CAT-6 TIA/EIA requirements for supporting a wide variety of applications.50 cables per pack.Lifetime limited manufacturer warranty

Monoprice® Flexboot Series 75' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in black color has snagless strain relief boots and offers high performance..Black.Cat6.Fixed length network cables are the perfect combination of value and performance.75'.Gauge: 24 AWG.Cable rating: 550 MHz.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless strain-relief boots.Device supported: Network device.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® Flexboot Series 75' Cat6 UTP Ethernet network cable in black color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.

1 ft. CAT6 Ethernet cable - 10 Pack - ETL Verified - Blue CAT6 Patch Cord - Molded RJ45 Connectors - 24 AWG Copper Wire – UTP Cable (C6PATCH1BL10PK).ECO-FRIENDLY AND QUALITY CONSTRUCTION: Eco-friendly (PVC free) LSZH cable produces lower levels of smoke & toxic (acidic) fumes in case of fire; EVA co-polymer jacket resists bending or fraying damage; 50-micron gold-plated pins improve signal integrity.ETL VERIFIED PURE COPPER CABLE: This Fluke Tested & ETL Verified 1ft snagless LAN cable with 100% copper Ethernet wire delivers error-free data & safe PoE power, unlike the lower quality copper-clad aluminum versions from other brands.HIGH PERFORMANCE LSZH CAT6 ETHERNET CABLE: 100% copper, Ethernet cable for error-free Multi Gigabit/Multi-speed 1/2.5/5Gbps connections; 10Gbps up to 55m; Low NEXT and RL; Complies with ANSI/TIA-568-2.D Category 6 requirements.LSZH CABLE WITH 100W PoE: Low Smoke Zero Halogen Ethernet patch cord with 24 AWG cable, stranded copper conductors supports various PoE devices up to 100W PoE++; Complies with IEEE 802.3bt type 4; Supports Cat5e & earlier standards.SPECS: Length: 1ft (30cm) Cat 6 Network Cable | Color: Black | 650 MHz Rated | Structure: 4 Pair U/UTP | RJ45 Connectors | Jacket: EVA, Al(OH)3 | Fire Rating: LSZH | 24 AWG Copper | Wiring: ANSI/TIA-568-B | ETL Verified | Warranty: Lifetime.Bulk CAT6 Molded Ethernet Cables | 100% Copper Wire | Blue | ETL Verified

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 10'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

This patch cable is ETL verified to meet or exceed all Category 6 performance standards and features a durable white jacket that simplifies departmental color coding while providing rugged flexibility for network connections..Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Backed by StarTech.com lifetime warranty.Molded RJ45 connectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire.Cable rating: Cat6 - 500 MHz, Number of conductors: 4 pair UTP, Fire rating: CMG rated (general purpose).Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color-coding.Constructed with top quality components.Includes patch cable.Comes with lifetime warranty.Meets RoHS, ETL, TIA/EIA-568-B.1-2001 T568B certifications and standards

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

This 15-foot Cat 5e UTP patch cable offers a reliable Ethernet connection that meets or exceeds all category 5e specifications. It features high-quality RJ45 connectors and molded PVC strain relief for added durability, and it is backed by a lifetime warranty..Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.Backed by StarTech lifetime warranty.Molded RJ45 connectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Introducing the StarTech Cat6a 6ft Ethernet Cable, the perfect solution for your high-speed networking needs. This cable is designed to deliver reliable and efficient connections for your 10GBASE-T networks, ensuring seamless data transfer and power delivery for your devices. Crafted with precision, the cable features 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, providing both durability and safety. The snagless design and gold-plated RJ45 connectors ensure a secure fit and minimize wear over time, making it ideal for various installation environments, from home offices to industrial settings. Whether you're connecting to switches, NAS devices, or PoE++ devices, this cable supports data transfer rates up to 10 Gbps, ensuring high-speed performance for demanding applications. Its backward compatibility with Cat 6 and Cat 5/5e standards ensures easy integration into existing network setups. Fluke Tested and ETL Verified, the StarTech Cat6a Ethernet Cable meets stringent performance standards, giving you peace of mind and assurance of quality. Upgrade your network with this reliable and versatile cable, and experience the difference in speed, reliability, and safety. Choose the StarTech Cat6a 6ft Ethernet Cable for your networking needs and enjoy a seamless and efficient connection every time..Ideal for networking applications, this cable is perfect for connecting switches, NAS devices, and PoE++ devices, ensuring reliable data transfer and power delivery..The cable measures 6 feet in length, providing a convenient reach for various installation environments, from home offices to industrial settings..Equipped with RJ45 connectors on both ends, this cable features 8-pin connections that ensure a secure and stable link between devices..Made with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, this cable is both durable and safe. The true color is purple..RJ45 Male Connector on End 1, RJ45 Male Connector on End 2.Supports data transfer rates up to 10 Gbps, ensuring high-speed and reliable network performance for demanding applications..Compatible with Cat 6, Cat 6a, and Cat 5/5e standards, making it easy to integrate into existing network setups..Fluke Tested and ETL Verified, this cable meets ANSI/TIA-568.2-D standards, ensuring top-notch performance and reliability..Comes with a Limited Lifetime Warranty, providing peace of mind and assurance of quality.

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 7'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in black.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

The C2G ® seven-foot red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. With its 24 AWG stranded bare copper conductor, it minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.7ft.Red.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty

Connect your computer system to a router, switch or hub with the Monoprice CAT-6 Cable that offers reliable Ethernet connectivity. Both ends of this networking cable play host to RJ-45 male connectors for seamless connection between devices. It has a durable and good-quality jacket that preserves the integrity of the high-quality copper conductor..CAT-6 for seamless connection over a network.Designed to transmit data at 1100 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.The Monoprice 2' CAT-6 Ethernet Network Cable, Gray, is ideal for 10 Gigabit Ethernet networks and provides dependable data transfer.

10 ft. CAT6 Ethernet Cable - 10 Pack - ETL Verified - Gray CAT6 Patch Cord - Snagless RJ45 Connectors - 24 AWG - UTP.CAT6 Ethernet cable multipack meets all ANSI/TIA-568-D Category 6 patch cable specifications.This Gray Ethernet cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability.CAT6 patch cord features 100% copper and foil-shielded twisted-pair wiring to prevent EMI interference.Snagless RJ45 boot design won't get caught in wiring conduits during installation.Built with 24 AWG copper wire and tested to keep Near-End Crosstalk within acceptable limits.Bulk CAT6 Patch Cables | Snagless | 100% Copper Wire | Gray | Lifetime Warranty

Monoprice™ Cat7 F/STP Ethernet Patch Cables are designed for environments where speed is priority. The 5.7mm diameter 26AWG cable and stepless FLEXboot™ design reduces congestion and simplifies moves, adds, and changes. It has been tested to 600MHz, meaning better performance over Cat6A‑rated cables. Backed by Monoprice's Lifetime Warranty, this is the ultimate patch cable for demanding, high‑bandwidth environments. Monoprice™ Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL® Code 444 and National Electrical Code® TIA‑568‑C.2 fire and safety standards, which require pure bare copper wire in communications cables..600MHz tested bandwidth.The FLEXboot™ connector head is easy on the fingers, while still offering connector protection.10 ft..The shielded (S/FTP) cable allows for maximum performance while minimizing EMI and RFI interference.The thinner 26AWG gauge makes it more flexible than traditional 23AWG cables.The 50µm gold plated contacts offer maximum corrosion resistance for the most reliable connections.This cable is perfect for 10G Ethernet environments and is backwards compatible with any existing Fast Ethernet and Gigabit Ethernet network.

The C2G ® 4' RJ-45 male/male Cat6 blue snagless unshielded Ethernet network patch cable with PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.4ft.Blue.Tripp Lite 6' Null modem gold cable uses copper conducting material to resist corrosion and allows you to connect 2 serial devices that require cross-wired configuration.

The StarTech M45PATCH100B Cat 5e molded patch cable in blue, is 100' long and has PVC jacket for insulation. The cable has RJ-45 male connectors at both the ends for optimal conductivity while reducing corrosion due to signal loss. This cable includes high quality 24 AWG copper wire and features durable construction. Cable rated at 350 MHz is suitable for use with fast Ethernet networks. The cable patches from hub to distribution panel and connects workstation to wall outlet..Patch cable is compatible with Fast Ethernet networks, connects workstation to wall outlet and patches from hub to distribution panel.Dimensions: 100'L.Comes in blue color and features polyvinyl chloride jacket with 24 AWG copper conductor for optimum insulation.Has one RJ-45 male connector at both ends.Cable rating: Cat 5e - 350 MHz.Molded cable provides excellent protection.Number of conductors: 4 pair UTP.Fire rating: CMG rated (general purpose).Colored hoods give departmental color-coding.Constructed with top quality components for durability.50-micron gold connectors deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion.Carefully constructed and tested, to retain Near End Crosstalk (NEXT) well within acceptable limits.Molded strain relief prevents the cable from being bent at sharp angles and minimizes the stress at the plug termination point.Meets RoHS, FCC, ETL, Green, TIA/EIA-568-B.1-2001 T568B certifications and standards.Weight: 2.2 lbs..Comes with lifetime warranty

The C2G ® two-foot RJ-45 male/male Cat6 black snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.2ft.Black.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.07 lbs..Comes with lifetime warranty

To ensure long-lasting performance, this high quality Cat 6 patch cable features a snagless design that protects the RJ45 connector clips from damage and makes the cable less prone to snagging during installation. The cable also features molded PVC strain relief that prevents the RJ45 connector termination points from bending at sharp angles - reducing the risk of cable damage, which could decrease network performance. Constructed of only top quality materials, this Cat 6 Patch Cord delivers reliable performance and is backed by our Lifetime Warranty..The N6PATCH25BL Cat 6 Patch Cable (25 ft) meets or exceeds all Category 6 cable specifications to ensure reliable Gigabit network connections, and features a durable blue PVC jacket that enables you to color code your network cable runs as needed..StarTech.com Cat6 cables are manufactured using high-quality copper conductors. While many cable manufacturers offer a "cheaper" cable based on a copper-coated aluminum core, we make no compromises on quality to ensure you receive top value and performance for your network cable investment..This Cat6 cable is constructed with 24 gauge copper wire, to support a broad range of Ethernet applications such as Power over Ethernet (PoE)..Because we use a high quality copper wire, our cables easily sustain the power required for Power over Ethernet applications, whereas the inferior quality offered by copper-coated aluminum cables may be subject to insufficient power delivery, heat buildup, equipment damage and potentially, fire..This Cat 6 patch cable offers high quality connectors comprised of 50-micron gold, to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion..Designed for use with Gigabit networks.Extend the reach of your Gigabit network devices by 25 ft.Patches from hub to distribution panel.Connects workstation to wall outlet.50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.Backed by StarTech.com lifetime warranty.N6PATCH5BL has a dielectric strength is 500V for 1 minute. It has a temperature range of -5°C to 70°C. It also has a 750 cycle rating for insertions..The C6PATCH5GN uses a cable assembly which is rated for 300V. Please note however, this cable is intended for standard Ethernet applications..Make Power-over-Ethernet-capable Gigabit network connections

Comprehensive CAT6 550 Mhz Snagless Patch Cables have a molded low profile, snagless boot that makes installing these cables quick and easy every time while providing superior strain relief. Comprehensive Patch Cables are available in a variety of colors. RoHS Compliant. Lifetime Warranty. When it has to work, it has to be Comprehensive!.Connecting devices to a local area network (LAN) for wired internet and data transfer. Ensuring stable and high-speed internet connectivity..This cable is 3 feet long..Cable uses RJ45 connectors on both ends. RJ45 connectors are standard for Ethernet cables and have the following features: RJ45 Connector Details: Connector Type: RJ45 (8P8C) Pin Count: 8 pins.It is constructed with a 24 AWG (American Wire Gauge) stranded copper conductor, ensuring flexibility and durability. It is encased in a CM Grade PVC (Polyvinyl Chloride) jacket, providing reliable insulation and protection. The cable is colored yellow, offering clear identification.primarily focuses on providing high-speed data transfer and reliable network connections with Data Transfer Rate: Up to 10 Gbps (10,000 Mbps)..Compatible with a variety of devices. Here are some common examples: Computers: Desktops, laptops, and servers. Network Switches: Managed and unmanaged switches. Routers: Home and office routers..Comes with a Life time warranty.

Achieve Unmatched Network Performance with StarTech 100ft Cat6a Ethernet Cable Elevate your network connectivity with the StarTech 100ft Cat6a Ethernet Cable. Engineered for high-performance and durability, this cable ensures fast, reliable, and secure connections for all your networking needs. Designed to support Multi-Gigabit/Multi-speed connections, this Cat6a cable offers robust protection against electromagnetic interference (EMI/RFI) and noise, ensuring minimal signal loss and consistent performance. The 27AWG pure bare copper wire construction enhances conductivity and reduces resistance, providing reliable data transmission. The snagless connectors with 50-micro gold-plated contacts ensure a precise fit, minimizing wear and maintaining signal integrity. The flexible Low Smoke Zero Halogen (LSZH) jacket is flame-retardant, emitting low smoke and toxic fumes, making it ideal for installations in poorly-ventilated areas, industrial settings, and residential environments. This versatile Cat6a patch cord is perfect for 10GBASE-T networks and supports up to 100W output for Power over Ethernet (PoE++) devices. It is backward compatible with Cat 6 and Cat 5/5e standards, ensuring seamless integration into existing network setups..This Cat6a Ethernet cable is designed for networking use, providing reliable connectivity for high-speed data transmission in both professional and home environments..The cable measures 100 feet in length, offering extensive reach for various networking setups..The cable features RJ-45 connectors on both ends, each with 8 pins, ensuring compatibility with standard Ethernet ports..Constructed with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, the cable is durable and safe for various installations. The true color of the cable is gray..Terminal type 1: RJ-45 male connector on one end. Terminal type 1: RJ-45 male connector on the other end..Supports data transfer rates up to 10Gbps, making it ideal for 10GBASE-T networks and backward compatible with Cat 6 and Cat 5/5e standards..Compatible with 10G switches, Network Attached Storage (NAS), SFP modules, and PoE++ devices. For a full list of compatible devices, refer to the extended description..The cable is Fluke Tested and ETL Verified for guaranteed Cat6a performance. It complies with RoHS, REACH, and CE standards for safety and environmental protection..The cable comes with a lifetime warranty, ensuring long-term reliability and performance.

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Experience fast, dependable transmission speeds from this patch cable. The PVC jacket insulates the stranded copper wires inside this Belkin CAT5e Ethernet patch cable against damage, while the molded strain relief prevents fraying..CAT-5e Ethernet patch cable with extra headroom for connecting to LANs or the Internet.32.81' cable length.RJ45 plugs with 50-micron gold-plated connectors.Features four unshielded twisted pair (UTP) 24 AWG stranded copper wires to reduce electromagnetic interference.Meets the CAT5e standard and is suitable for use with 100/1000BASE-T networks.Wires are housed in a durable PVC outer jacket for abrasion and corrosion resistance.Snagless design prevents cracking and breaking.Ensure a reliable connection between your computer and networking devices with this Belkin CAT5e Ethernet patch cable.

The C2G ® 3' RJ-45 male/male Cat5e white snagless unshielded Ethernet network patch cable with FR-PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. This cable transmits data at the rate of 1000 Mbps. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.White.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.09 lbs..Comes with lifetime warranty

The C2G 31341 5' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty.Category 6 for Network Device

3 ft. CAT6 Ethernet Cable - 10 Pack - ETL Verified - Gray CAT6 Patch Cord - Snagless RJ45 Connectors - 24 AWG - UTP.CAT6 Ethernet cable multipack meets all ANSI/TIA-568-D Category 6 patch cable specifications.This Gray Ethernet cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability.CAT6 patch cord features 100% copper and foil-shielded twisted-pair wiring to prevent EMI interference.Snagless RJ45 boot design won't get caught in wiring conduits during installation.Built with 24 AWG copper wire and tested to keep Near-End Crosstalk within acceptable limits.Bulk CAT6 Patch Cables | Snagless | 100% Copper Wire | Gray | Lifetime Warranty

The C2G® 14' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.14ft.Blue.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.42 lbs..Comes with lifetime warranty

The C2G ® 5' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty

C2G® 6' CAT6 Snagless network patch cable in green color has RJ-45 male connectors on both ends and minimizes near end crosstalk levels. Cable has molded, snag less boot prevents unwanted cable snags during installation..Dimensions: 6'L.For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high-performance networking applications.Connector: 1 x RJ-45 male on first and second end.Conductor: Copper.Cable type: Category 6.Green.Snagless design protects clips when plugging and unplugging.Unshielded twisted pair wires.Weight: 0.174 lbs..Warranty: Lifetime.C2G® 6' CAT6 Snagless network patch cable in green color is constructed from high quality copper and is ideal for bandwidth intensive voice, data or video distribution applications.

The C2G® 10' male to male category 5e blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 5e.10ft.Blue.Connector on first end: 1 x RJ-45 Male network, connector on second end: 1 x RJ-45 Male network.Device supported: Network device, Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm + 0.15 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.02 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.24 lbs..Comes with lifetime warranty

The Cat6 Snagless Unshielded (UTP) Slim Network Patch Cable is the perfect solution for high density datacenter applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard Cat6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard Cat6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard Cat6 cables. The small size and small bend radius of this cable allows it to be easily routed through cable management panels. This cable is designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..Offers a reliable network connectivity.Features Category 6 cable type.Protects the plug and socket from dust when plugged in

The C2G 3' green Cat6 snagless patch cable is suitable for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. It has one RJ-45 - male connector on both the ends for reliable connectivity. The 24-AWG stranded copper conductors ensure optimal signal conductivity. It has HDPE insulation and PVC jacket for long lasting durability. The unshielded twisted pairs reduce interference and structural return loss. This cable with snagless design protects the connectors from damaged to offer long period optimal performance..Cat6 UTP patch cable with snagless design protect clips while plugging and unplugging.Cable length: 3'.Has one RJ-45 male connector on both the ends for reliable connectivity.Features HDPE insulation and 4 pairs of 24 AWG (7/0.20) copper conductors for better conductivity.RoHS, TIA/EIA-568-B-2.1 and draft 9 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN and 100 Mbps TP-PMD.Comes in green color.Diameter: 0.98 + 0.05 mm.Voltage: 30 V.Resistance: 9.38 Ohm/100 m, Impedance: 100 Ohm.Mutual capacitance: 5600 pf/100 m.Temperature: 60 deg C.Propagation delay: 545 ns/100 m, Delay skew: 45 ns/100 m.Weight: 0.12 lbs..Comes with lifetime warranty

The C2G 22014 15' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.15ft.Blue.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.4 lbs..Comes with lifetime warranty

Set up a reliable 10 Gbps connection to a switch or networking device, using this Shielded Snagless S/FTP Category 6a Ethernet Cable. Pure Bare Copper Wire Our Snagless Cat6a Cables are designed for long-lasting performance. The 4-Pair Shielded and Foiled Twisted Pair (S/FTP) construction utilizes 27AWG pure bare copper wire for improved conductivity and low resistance, ensuring reliable transmission and minimal signal loss. Pure bare copper wiring offers consistent performance characteristics across different environments. Each pair is shielded in aluminum-mylar foil and tinned copper braid for enhanced EMI protection. Durable Construction The Cat6a Ethernet Cable features snagless 50-micro gold-plated connectors that enable a precise fit to minimize wear and signal loss. The flexible Low Smoke Zero Halogen (LSZH) flame-retardant jacket emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer installations in poorly-ventilated areas including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered..It is used for networking purposes. It provides high-speed data transfer and reliable connectivity for network infrastructure..The cable length is 6 feet..features the following connections: Connector Type: RJ45 Pin Count: 8 pins.The cable features a 27 AWG gauge, with a Low Smoke Zero Halogen (LSZH) jacket, bare copper conductors, and an orange color..It supports high-speed data transfer rates of up to 10 Gbps (10,000 Mbps)..compatible with a wide range of devices that have RJ45 Ethernet ports. Here are a few examples: Computers (Desktops and Laptops), Routers , Switches..Comes with a Life time warranty.

The C2G® 10' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.25 lbs..Comes with lifetime warranty

The C2G ® 3' white Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.Length: 3 ft.Connectors: 1 x RJ-45 - male.Connectors (Other Side): 1 x RJ-45 - male.Color: White.Manufacturer Warranty: Limited lifetime warranty.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.12 lbs..Comes with lifetime warranty

The C2G 31341 5' Cat6 snagless green network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.5ft.Green.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

Use this CAT-6 Network Patch Cable from Intellinet Network Solutions® to set up your high-performance network connections. It supports all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE and up to 10-Gbps data communications at frequencies up to 250 MHz. With a much smaller diameter than a normal CAT-6 network cable, this stranded cable nonetheless provides all the features. It gives a network cabinet's equipment a neater, more organized appearance in dense cable installations, and its smaller size helps improve air circulation. Because of its smaller size and increased flexibility, the cable is an excellent option for installations in confined spaces and around corners. This cable is appropriate for PoE applications since it is made entirely of pure bare copper, unlike other cables that are made of copper-clad aluminum (CCA) or even copper-clad steel (CCS). The contacts' gold coating protects them from corrosion in all types of environments. All of Intellinet Network Solutions' patch cables are the ideal option for high-density settings like data centers and server rooms because of their snag-free boot design. It is simple to connect and disconnect the cable plugs securely without breaking the latch thanks to strain relief and a molded boot for safety..10 pack, with each cable 20-ft. long.CAT-6 with 10G/1G and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Snag-free boots to smoothly and easily pull the cable without damaging the RJ45 connectors.Ultra-thin format for more flexibility and simplified cable management in dense installations.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B.Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Set up a reliable 10 Gbps connection to a switch or networking device, using this Shielded Snagless S/FTP Category 6a Ethernet Cable. Pure Bare Copper Wire Our Snagless Cat6a Cables are designed for long-lasting performance. The 4-Pair Shielded and Foiled Twisted Pair (S/FTP) construction utilizes 27AWG pure bare copper wire for improved conductivity and low resistance, ensuring reliable transmission and minimal signal loss. Pure bare copper wiring offers consistent performance characteristics across different environments. Each pair is shielded in aluminum-mylar foil and tinned copper braid for enhanced EMI protection. Durable Construction The Cat6a Ethernet Cable features snagless 50-micro gold-plated connectors that enable a precise fit to minimize wear and signal loss. The flexible Low Smoke Zero Halogen (LSZH) flame-retardant jacket emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer installations in poorly-ventilated areas including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered..It is used for networking purposes. It provides high-speed data transfer and reliable connectivity for network infrastructure..The cable length is 6 feet..Features the following connections: Connector Type: RJ45 Pin Count: 8 pins (standard for RJ45 connectors).cable is made with a 27 AWG gauge, a Low Smoke Zero Halogen (LSZH) jacket, bare copper conductors, and an Red exterior color.High-Speed Data Transfer: Supports data transfer rates up to 10 Gbps (10,000 Mbps)..Compatible with a wide range of devices that have RJ45 Ethernet ports. Here are a few examples: Computers (Desktops and Laptops), Routers, Switches..Comes with a Life time warranty.

Establish a reliable connection between your computer and network devices by using this patch cable. A PVC jacket protects this Belkin Ethernet patch cable from damage, while the RJ45 connectors are easy to plug in with internal load bars..CAT5e Ethernet patch cable with extra headroom for connecting to LANs or the Internet.6.56' cable length.RJ45 plugs with 50-micron gold-plated connectors.Features four unshielded twisted pair (UTP) 24 AWG stranded copper wires to reduce electromagnetic interference.Meets the CAT5e standard and is suitable for use with 100/1000BASE-T networks.Wires are housed in a durable PVC outer jacket for abrasion and corrosion resistance.Snagless design prevents cracking and breaking.Get clear data transmissions with this 6.56-foot Belkin Ethernet patch cable.