Copper Cable

Copper cable..Compatibility: PC.Connectivity technology: Wired.Power consumption (per end): 0.57 W.Cable type: Twinax.Conductor: Copper.Storage temperature: -40 deg to 85 deg C.Connector on first end: 1 x SFP+ network.Connector on second end: 1 x SFP+ network.Cable length: 3.3'.Device supported: Network device.Length: 1 m

Cisco QSFP-H40G-CU5M 40GBASE-CR4 16.4' QSFP Direct-attach copper cable with channels offers uninterrupted signal transmission with 40 gigabit QSFP+ transceiver. Channels are easily broken out to four separate 10 gigabit SFP+ transceivers. The QSFP copper cable offers secure connection to the electrical circuitry of the system with either a copper or an optical external network. Transceiver is perfect for switches, routers and data center equipments to offer higher density..Twinaxial cable for easy signal transmission.Comes in gray color for new look.Has cable length of 16.4' for convenience.Supports network device to connect computers or other electronic devices together and provides copper conductors for high conductivity.Has 1 x QSFP+ connector on first end and 1 x QSFP+ connector on second end for flexibility.Has operating temperature range of 32 - 158 deg F for precise operation.Meets RoHS compliance.Flexibility of interface choice.Hot-swappable input/output device that plugs into a 40-Gigabit Ethernet QSFP+ ethernet switch port.Support for 40GBASE Ethernet.Operating temperature: 32 - 158 deg F.Designed for Cisco Catalyst 3016.Cisco 40GBASE-CR4 16.4' QSFP Direct-attach copper cable has hot-swappable form factor with 4 optical transmit and receive channels. Optical fiber offers easy signal transmission.

Cisco QSFP-H40G-CU3M 40GBASE-CR4 9.84' QSFP Direct-attach copper cable with channels offers uninterrupted signal transmission with 40 gigabit QSFP+ transceiver. Channels are easily broken out to four separate 10 gigabit SFP+ transceivers. The QSFP+ transceiver module offers secure connection to the electrical circuitry of the system with either a copper or an optical external network. Transceiver is perfect for switches, routers and data center equipments to offer higher density..Twinaxial cable for easy signal transmission.Comes in orange color for new look.Compatible with Cisco 40GBASE QSFP+ modules.Has cable length of 9.84' for convenience.Supports network device to connect computers or other electronic devices together and provides copper conductors for high conductivity.Has QSFP+ connector on first end for flexibility.Has operating temperature range of 32 - 158 deg F for precise operation.Meets IEC60825-1, CFR 21Section 1040, UL E116441, ELV standards.Cisco 40GBASE-CR4 9.84' QSFP Direct-attach copper cable has hot-swappable form factor with 4 optical transmit and receive channels. Optical fiber offers easy signal transmission.

For use in 10Gbps ethernet and fibre channel applications..SFP+/SFP+.Fully compliant to MSA SFF-8431 specification.3.28'.Connector on first end: 1 x SFF-8431 male SFP+.Connector on second end: 1 x SFF-8431 male SFP+.Conductor: Copper.Reach: 1 m.Equivalent to Cisco SFP-H10GB-CU1-5M.100 ohm twinaxial cable, diecast metal shells, pull-to-release latching.Support for 1x, 2x, 4x and 8x fiber channel data rates.Device supported: Network device.Designed for: Cisco Catalyst 2960, 2960-24, 2960-48, 2960G-24, 2960G-48, 2960S-24, 2960S-48.Hot pluggable SFP 20pin footprint.Low power consumption, intended application 10Gbps hardware interconnection.Package includes: 1 m 30 AWG SFP+ high speed passive copper 10Gbps cable, System requirements: SFP+ Direct Attach Cable ( DAC ) twinaxial cables conform to SFF-8431 standards.Green Compliant: Yes, Green Compliance Certificate/Authority: RoHS.Warranty: Lifetime limited

The C2G® Value series 6" Y-cable splits a 3.5 mm stereo audio output to two 3.5 mm stereo audio ports to meet your application needs. It has one mini-phone male stereo audio connector on first end and two mini-phone female stereo audio connector on second end. This 2-way cable provides crisp, clear sound. It includes brass/nickel-plated connectors that easily connect 26 AWG spiral-wrapped copper-shielded wire to protect against EMI/RFI interference. The fully molded connectors ensure excellent strain relief for long-lasting usage..Y-cable adapts your audio connections to meet your application needs.Cable length: 6".Has 3.5mm mini-phone male stereo audio connector on first end and two 3.5mm mini-phone female stereo audio connector on second end.Features 26 AWG copper conductor for enhanced conductivity.Nickel-plated contacts offer superior protection against corrosion.Certification and Standards: RoHS.Minimum bend radius: 60 deg.Temperature: -20 to 80 deg C operating, -25 to 85 deg C storage.Shielded to help reduce interference.RoHs Compliant.Weight: 0.04 lbs..Comes with lifetime warranty

Cisco Twinax Cable, Passive, 30AWG Cable Assembly.Twinaxial for Network Device.4.92 ft.SFP+ Male Network.SFP+ Male Network.Black.Conductor: Copper.Power: 1 W consumption, Temperature: 0 - 70 deg C commercial range, -40 - 85 deg C storage range.Weight: 75 g.Compatibility: Cisco catalyst switch: 2960-24LC-S, 2960-24PC-L, 2960-24PC-S, 2960-24TC, 2960-24TC-L, 2960-24TC-S, 2960-48PST-L, 2960-48PST-S, 2960-48T, 2960-48TC, 2960-48TC-L, 2960-48TC-S, 2960-8TC, 2960-8TC-S, 2960G-24TC, 2960G-48TC, 2960G-8TC.Warranty: 90 days limited.Cisco™ 4.92' Twinaxial SFP+/SFP+ passive cable in black color used as a network device features copper conductor for superior conductivity.

250FT Cat6 Bulk Bare Copper Ethernet Cable, UTP, Solid, Riser Rated (CMR), 500MHz, 23AWG - White.Cat6 UTP Solid Bulk Cables.250 Ft.23 AWG.White

Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 1m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 1m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in brown.Maximum data transfer rate: 100 Gbps

Orange.Category 5e bare wire/bare wire.High-density polyethylene insulation.1000'.Material: Polyvinyl chloride (PVC) jacket, high-density polyethylene (HDPE) - insulation, Gauge: 24 AWG.Conductor: Bare copper.Device supported: Network device.Technology: Unshielded twisted pair (UTP), Jacket type: CM, CMR, plenum, MPR.Outer diameter: 5.3 mm.Pairs per cable: 4 pairs.Conductor DC resistance: 89 Ohm/km, Insulation resistance: 100 Ohm/km.Foot-marked cable.Ideal for 10Base-T(IEEE 802.3), 100BASE-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN(IEEE 802.12), token ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155, voice and multimedia.CM/CMR rated for use in walls and conduit in ceiling.Bandwidth: Supports voice/data/video distribution applications up to 350 MHz.Compliant and standards: EIA/TIA 568B.2, UL, CSA, ETL, RoHS.Weight: 27 lbs..Warranty: Lifetime limited

Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 3m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 3m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps

Cisco QSFP to QSFP copper direct-attach cable are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks. Made of copper materials and comes in brown with 5m length..QSFP to QSFP cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 5m.Direct attach assemblies with QSFP-100G connectors.Made of copper and comes in orange.Maximum data transfer rate: 100 Gbps

Cisco CAB-CONSOLE-USB= 6 ft. Console Cable with USB Type A and mini-B connectors, system and spare connector..Copper conductor.Used for Cisco 1921, 1921 4-pair, 1921 ADSL2+, 1941, catalyst 2960, 2960-24, 2960-48.Cable length: 6'.Connector 1: 1 x 4 pin USB type A - male.CISCO™ Console Cable is used for 1921, 1921 4-pair, 1921 ADSL2+, 1941; Catalyst 2960, 2960-24, 2960-48.

White.Category 5e bare wire/bare wire.High-density polyethylene insulation.1000'.Material: Polyvinyl chloride (PVC) jacket, high-density polyethylene (HDPE) - insulation, Gauge: 24 AWG.Conductor: Bare copper.Device supported: Network device.Technology: Unshielded twisted pair (UTP), Jacket type: CM, CMR, plenum, MPR.Outer diameter: 5.3 mm.Pairs per cable: 4 pairs.Conductor DC resistance: 89 Ohm/km, Insulation resistance: 100 Ohm/km.Foot-marked cable.Ideal for 10Base-T(IEEE 802.3), 100BASE-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN(IEEE 802.12), token ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155, voice and multimedia.CM/CMR rated for use in walls and conduit in ceiling.Bandwidth: Supports voice/data/video distribution applications up to 350 MHz.Compliant and standards: EIA/TIA 568B.2, UL, CSA, ETL, RoHS.Weight: 27 lbs..Warranty: Lifetime limited

The C2G ® 3' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.3ft.Yellow.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

Monoprice® 100' CL2 2-Conductor 12 AWG copper wire cable in white color has a PVC jacket on the outside that is marked with a blue strip to indicate polarity. Cable offers extra resistance to the impedance of the speaker and is oxygen-free..White.Copper cable.One side of the clear outer PVC jacket is marked with a blue stripe to indicate polarit.100'.Device supported: Audio device, speaker.12 AWG oxygen-free cable.Features two conductors made of high-purity (greater than 99.95% pure), oxygen-free bare copper.Pure bare copper is a superior conductor to the copper clad aluminum (CCA) conductors used in most other inexpensive speaker wire.CCA is only about 68% as conductive as pure bare copper.Additional resistance is added to the impedance of your speakers and can negatively effect the sound.Monoprice® 100' CL2 2-Conductor 12 AWG copper wire cable in white color is ideal to use with loudspeaker and contains two conductors.

The Tripp Lite N224-01K-GN 1000' bulk solid-core plenum-rated CMP cable in blue, made of high-quality 24 AWG 4-pair solid copper wire comes with a 350 MHz/1 Gbps rate. It is suitable for all horizontal wiring applications..Bulk cable is ideal for horizontal wiring applications, including 10/100/1000 Base-T Ethernet, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice applications.Dimensions: 1000' cable length.Blue CMP-rated PVC jacket.Conductor: 23 AWG 4 twisted pairs solid bare copper.Connections: 1 x bare wire on both ends.Data transfer rate: 1 Gbps.Designed for distributing data, voice and digital video across Gigabit Ethernet networks.Minimum near-end crosstalk.Bandwidth: 550 MHz.RoHS compliant.Comes with lifetime limited warranty

The N222-01K-WH Cat6 Gigabit Bulk Solid-Core PVC Cable is premium high-speed cabling designed for Cat6 premise applications, such as the distribution of data, voice and digital video across Gigabit Ethernet networks. Designed for fast transmission and excellent signal quality, this white cable ensures peak performance through your LAN (local area network).Manufactured from 23 AWG copper wire, the four-pair solid UTP N222-01K-WH delivers speeds up to 550 MHz/1 Gbps. Protected by a CMR-rated PVC jacket, this cable drastically reduces impedance and structural return loss as compared to standard 100 MHz wire. Near-end crosstalk levels are kept to a minimum, making the N222-01K-WH ideal for 10/100/1000 Base-T Ethernet, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, EIA/TIA and Token Ring Type 3 applications.The N222-01K-WH meets most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6, draft 11)..CMR-rated PVC jacket.High-quality 23 AWG 4-pair solid copper wire.Less impedance and structural return loss than 100 MHz wire.Meets IEEE 802.3ab and ANSI/EIA/TIA 568 standards.Rated for 550 MHz/1 Gbps communications

C2G Plenum-rated bulk shielded speaker wire in white color is constructed from two color-coded 18 AWG twisted pair copper cables for easy identification. Wire features foil shield with stranded copper drain wire for easy grounding connections..Cable length: 500'.White.Connector on first end: Bare wire.Conductor: Copper.Conductor color: Red/black.Jacket type: Plenum.Device supported: Speaker.Shield: 100% foil with drain wire.Certifications and standards: CMP-rated, CL3P, CL2P, CMR, CL3R, CL2R, CMG, CL3, CL2, CMX, CL3X, CL2X.Weight: 10.308 lbs..Warranty: Lifetime limited.C2G Plenum-rated bulk shielded speaker wire in white color is 500' in length and provides cabling for audio/video installations in educational and commercial settings.

The C2G ® 3' blue Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

The C2G ® two-foot RJ-45 male/male Cat6 black snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.2ft.Black.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.07 lbs..Comes with lifetime warranty

The C2G ® seven-foot red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. With its 24 AWG stranded bare copper conductor, it minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.7ft.Red.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G 10' red Cat5e snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with FR-PVC jacket truncates both impedance and structural return loss. The cable features 24 AWG stranded bare copper conductor, which minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modem DSL/cables, patch panels and other high-performance networking applications..Category 5e for Network Device.RJ-45 Male.10ft.Red.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, EIA/TIA 568B.2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.23 lbs..Comes with lifetime warranty

Comprehensive® Snagless patch cable has molded low profile snagless boot for easy installation. The 24 AWG bare copper stranded cable comes with gold-plated RJ-45 male connector on first and second end for providing uninterrupting connection. The flexible X-traflex PVC jacket of this patch cable facilitates easy installation and is highly durable. Comes in black color for attractive look. Suitable for 1000 BASE-T gigabit Ethernet network applications..Network cable supports voice/data/video distribution applications up to 550 MHz.Easy-to-install 50' long cord.RJ-45 male to male connectors for reliable connections.X-traflex jacket provides double shielding and bare copper strand increases coverage area.Comes in black color for a new look.4 twisted pairs conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.50-micron Gold-plated connector plating for good conductivity.Copper conductor for good conductivity.Offers guaranteed performance with 1000 BASE-T; 100 BASE-T; 10 BASE-T and 4/16 Mbps token ring.Meets all Cat6 TIA/EIA standards, Verified to EIA/TIA 568B.2.Features copper alloy plating with 50u gold contact for durability and has a 6.2mm outer diameter.Supports voice/data/video distribution applications up to 550 MHz, snagless boot for easy installation.Weighs 0.8 lb.Comes with lifetime warranty.Comprehensive® 550MHz Snagless patch cable in black color has RJ45 connector on both ends for easy connectivity. Supports voice/data/video distribution applications up to 550 MHz.

The C2G® 10' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.25 lbs..Comes with lifetime warranty

The C2G 31341 5' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty.Category 6 for Network Device

Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks..Passive copper direct-attach cable is suitable for very short links and offers a cost-effective way to connect within racks and across adjacent racks.Cable length: 6.56'.Features SFP28 to SFP28 connectors (male to male).Comes in brown.Do not require FEC on the host ports.Maximum data transfer rate: 25000Mbps.5-year manufacturer limited warranty.Features SFP28 cable type to better accommodate your precise requirements with maximum productivity.Fully compatible with switches

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all CAT-6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..CAT-6 snagless unshielded (UTP) ethernet network patch cable is designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Cable length: 5'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.Snagless connector design for high density environments and protecting the RJ-45 connector's lock.Supports 10 Gigabit networks up to 180' for fast data transmission and maximum performance and supports 1 Gigabit up to 328'.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk.Meets all CAT-6 TIA/EIA requirements for supporting a wide variety of applications.50 cables per pack.Lifetime limited manufacturer warranty

The C2G ® 1' orange Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 1'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in orange color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.05 lbs..Comes with lifetime warranty.Comes with lifetime warranty

Cisco SFP-H10GB-CU1M 3.3' Twinaxial cable features optical interoperability with 10GBASE XENPAK, 10GBASE X2 and 10GBASE XFP interfaces on the same link. Has digital optical monitoring capability for strong diagnostic capabilities. Supports Cisco SFP+ modules are supported on a wide range of Cisco switches and routers. Cable benefits industry's smallest 10G form factor for greatest density per chassis. SFP Cable is compatible with Cisco modules..Passive network cable is perfect for network modules.Comes in black color.Compatible with SG500X series.Cable length: 3.28'.Connector on first end: 1 x SFP+, connector on second end: 1 x SFP+.Copper conductor.Technology: Twin axial.Cisco 3.3' Twinaxial cable offers a wide variety of 10 Gigabit Ethernet connectivity options for data centre, enterprise wiring closet and service provider transport applications.

The C2G 31341 5' Cat6 snagless green network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.5ft.Green.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

Digiwave EM746100 100 ft. Cat5e 350Mhz Network Cable is uses for connecting a PC, Mac or network device to 10/100/1000 Ethernet networks. Gold plated copper contacts on the RJ45 male to male connectors provide excellent conductivity for accurate high speed transmissions. Snagless molded boot covers protect the RJ45 plug of the cable from damage during installation..Cat5e Network Cable.100 ft..Snagless booted connectors.350Mhz transfer rate.One year manufacture warranty

The Cisco 3.28' tangerine direct attach copper cable has QSFP+ male connector on first end and QSFP+ male connector on second end for enhanced connectivity. It features 30 AWG copper conductors for better conductivity. This copper cable is compatible with Cisco 40GBASE-SR4 QSFP+ copper module. It is perfect for short distances and provides a high cost-effective way to establish a 40-Gigabit link between QSFP+ ports of Cisco switches within racks and across adjacent racks..Direct attach copper cable is a cost-effective way to establish 40 Gigabit link.Cable length: 3.28'.Connections: QSFP+ male on first end and QSFP+ male on second end.Connectivity: Wired.Has 30 AWG copper conductor for superior conductivity.Meets IEC60825-1, UL #E116441 Compliant, ELV Compliant, CFR 21Section 1040, RoHS-6 standards and certifications.Data transfer rate: 40 Gbps.Comes in tangerine color.Suitable for use with Cisco 40GBASE-SR4 QSFP+ copper module

The C2G ® 25' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. This cable, with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 25'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.71 lbs..Comes with lifetime warranty.The Tripp Lite N002-030-BL 30' CAT-5e RJ-45 Molded Patch Cable, Blue, is apt for 1000 Mbps networks and facilitates error-free data transfer.

The C2G ® 3' RJ-45 male/male Cat5e white snagless unshielded Ethernet network patch cable with FR-PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. This cable transmits data at the rate of 1000 Mbps. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.White.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.09 lbs..Comes with lifetime warranty

The C2G ® 5' gray Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Comes in gray color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Weight: 0.16 lbs..Comes with lifetime warranty

The C2G ® 1' male/male Cat6 blue snagless shielded Ethernet network patch cable with PVC jacket, truncates both impedance and structural return loss. The 24-AWG bare copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. It safeguards high-speed network from noise and electromagnetic interference. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. It has aluminum foil shielding to get rid of EMI/RFI interference to ensure reliable error-free data communications. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable modem, patch panel and other high performance networking applications in high noise environments..Network patch cable safeguards high speed network from noise and electromagnetic interference.Cable length: 1'.Connections: one RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 26 AWG stranded bare copper conductors for excellent signal transmission.Meets ANSI/TIA 568 C.2, CE standards and certifications.Contact material: 50 micron gold-plated, Shell: Nickel plated for shieldingCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments.Comes in blue color.Voltage rating: 30 V.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 75 deg C.Offers immense protection from EMI/RFI interference.High quality cable and plugs construction minimizes near-end crosstalk (NEXT) levels.Weight: 0.05 lbs..Comes with lifetime warranty

The C2G ® 7' orange Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 7'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in orange color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty.StarTech.com® HDMM10 10' HDMI Cable with ultra HD male/male HDMI connectors supports 4k x 2k video signal. Offers multimedia interface with clear audio/video signal.

C2G® 6' CAT6 Snagless network patch cable in green color has RJ-45 male connectors on both ends and minimizes near end crosstalk levels. Cable has molded, snag less boot prevents unwanted cable snags during installation..Dimensions: 6'L.For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high-performance networking applications.Connector: 1 x RJ-45 male on first and second end.Conductor: Copper.Cable type: Category 6.Green.Snagless design protects clips when plugging and unplugging.Unshielded twisted pair wires.Weight: 0.174 lbs..Warranty: Lifetime.C2G® 6' CAT6 Snagless network patch cable in green color is constructed from high quality copper and is ideal for bandwidth intensive voice, data or video distribution applications.

The C2G® 7' male to male category 6 yellow snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 7'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in yellow color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G ® 50' male to male category 6 snagless blue patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 50'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Features durable polycarbonate connector and four twisted pair 24 AWG stranded bare copper for good conductivity.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Unshielded twisted pair technology for less signal loss.Comes in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 1.35 lbs..Comes with lifetime warranty

This C2G 50' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable has a PVC jacket, and it truncates both impedance and structural return loss. It features a 24 AWG stranded bare copper conductor and minimizes near-end crosstalk levels. This patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, and patch panels and is useful for high performance networking applications..Cable length: 50'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 1.38 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Kensington Technology Mobile Tablets Blue Kensington Trapper Keeper Universal Case - Designed with a mead-inspired style

15ft (4.6m) CAT6 Ethernet Cable - LSZH (Low Smoke Zero Halogen) - 10 Gigabit 650MHz 100W PoE RJ45 UTP Network Patch Cord Snagless w/Strain Relief - Blue CAT 6, ETL Verified (N6LPATCH15BL).ECO-FRIENDLY AND QUALITY CONSTRUCTION: Eco-friendly (PVC free) LSZH cable produces lower levels of smoke & toxic (acidic) fumes in case of fire; EVA co-polymer jacket resists bending or fraying damage; 50-micron gold-plated pins improve signal integrity.ETL VERIFIED PURE COPPER CABLE: This Fluke Tested & ETL Verified 6ft snagless LAN cable with 100% copper Ethernet wire delivers error-free data & safe PoE power, unlike the lower quality copper-clad aluminum versions from other brands.HIGH PERFORMANCE LSZH CAT6 ETHERNET CABLE: 100% copper, Ethernet cable for error-free Multi Gigabit/Multi-speed 1/2.5/5Gbps connections; 10Gbps up to 55m; Low NEXT and RL; Complies with ANSI/TIA-568-2.D Category 6 requirements.LSZH CABLE WITH 100W PoE: Low Smoke Zero Halogen Ethernet patch cord with 24 AWG cable, stranded copper conductors supports various PoE devices up to 100W PoE++; Complies with IEEE 802.3bt type 4; Supports Cat5e & earlier standards.SPECS: Length: 6ft (1.8m) Cat 6 Network Cable | Color: Black | 650 MHz Rated | Structure: 4 Pair U/UTP | RJ45 Connectors | Jacket: EVA, Al(OH)3 | Fire Rating: LSZH | 24 AWG Copper | Wiring: ANSI/TIA-568-B | ETL Verified | Warranty: Lifetime.CAT6 Ethernet Cable | LSZH | Snagless | 100W PoE | Lifetime Warranty

Digiwave EM746075 75 ft. Cat5e 350Mhz Network Cable is uses for connecting a PC, Mac or network device to 10/100/1000 Ethernet networks. Gold plated copper contacts on the RJ45 male to male connectors provide excellent conductivity for accurate high speed transmissions. Snagless molded boot covers protect the RJ45 plug of the cable from damage during installation..Cat5e Network Cable.75 ft..Snagless booted connectors.350Mhz transfer rate.One year manufacture warranty

Startech.com® 500' Plenum CMP Cat5e solid UTP bulk cable comes with blue polyvinyl chloride jacket to resist flame. Cable helps the user to measure exact installation requirements with its foot marked jacket..Cat5e.Blue.500'.Wire gauge: 24 AWG.Performance: 350 MHz.Cable jacket type: Polyvinyl chloride, Fire rating: CMP Rated (Plenum).Foot-marked cable.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits, high quality 24AWG copper wire.Certifications and Standards: RoHS, UL listed.Weight: 11.5 lbs..Warranty: Lifetime.Startech.com® 500' Plenum CMP Cat5e solid UTP bulk cable is made of 24 gauge copper wire to resist corrosion and is designed to use with fast Ethernet networks.

The C2G 3' green Cat6 snagless patch cable is suitable for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. It has one RJ-45 - male connector on both the ends for reliable connectivity. The 24-AWG stranded copper conductors ensure optimal signal conductivity. It has HDPE insulation and PVC jacket for long lasting durability. The unshielded twisted pairs reduce interference and structural return loss. This cable with snagless design protects the connectors from damaged to offer long period optimal performance..Cat6 UTP patch cable with snagless design protect clips while plugging and unplugging.Cable length: 3'.Has one RJ-45 male connector on both the ends for reliable connectivity.Features HDPE insulation and 4 pairs of 24 AWG (7/0.20) copper conductors for better conductivity.RoHS, TIA/EIA-568-B-2.1 and draft 9 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN and 100 Mbps TP-PMD.Comes in green color.Diameter: 0.98 + 0.05 mm.Voltage: 30 V.Resistance: 9.38 Ohm/100 m, Impedance: 100 Ohm.Mutual capacitance: 5600 pf/100 m.Temperature: 60 deg C.Propagation delay: 545 ns/100 m, Delay skew: 45 ns/100 m.Weight: 0.12 lbs..Comes with lifetime warranty

The C2G 22011 15' Cat5e 350MHz snagless unshielded blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and FR-PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 15'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, FR-PVC jacket, molded PVC hood, HDPE insulation and copper alloy contact.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.55 mm Nominal thickness, 5.3 +/- 0.15 mm O.D., 0.95 +/- 0.02 mm Dia. conductor.DC resistance: 89 Ohm/km maximum, Insulation resistance: 100 Ohm/km minimum, Dielectric strength: 500 MV/m.Frequency: Up to 350 MHz.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.34 lbs..Comes with lifetime warranty.Category 5e for Network Device.6" LP4 to LP4 SATA power Y cable adapter features powers an IDE (LP4 connected) drive using a SATA power connector from the computer power supply.

The C2G ® 14' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 14'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.4 lbs..Comes with lifetime warranty

The C2G 22014 15' Cat6 snagless black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.15 ft.Black.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.4 lbs..Comes with lifetime warranty.The StarTech Slimline Serial DB9 gender changer is a reliable way to convert a nine-pin female port to a nine-pin male port.