Dual Monitor Mounts

MI-1772 Dual Monitor Desk Mount is compatible with screens up to 32" on each arm. Clear up desk space and raise your monitors off your desk with this dual monitor desk mount for desk. Full motion arms swivel, tilt, rotate and move up and down to position the monitors just right for you. The gas spring mechanism includes an adjustable counterbalance so that you can make fluid and easy height adjustments to your screen and position your displays in the optimum viewing position. Rotate your screens between portrait and landscape mode to suit your workflow needs. Cable management sleeves offer a clean, clutter-free look so you can utilize your desk space more efficiently. The dual base allows supports clamp or grommet installations..Fits 2 screens from 13" - 32" in size, with a maximum support weight of 20 pounds each, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. Comes with interchangeable C-clamp or grommet base mount for use on desktops.Two monitor stand has counterbalanced, gas spring arms which make adjustments effortless. It has 2 quick-detachable VESA plates for easy mounting and removal of monitors. Comes with integrated cable management and is made out of heavy duty steel and aluminum alloy..Dual monitor arms can tilt up and down 90 degrees, swivel left/right 180 degrees at two joins and a full 360 at another, and raise/lower a total of 13 inches. Both monitors can be rotated into portrait or landscape orientations with easy and will stay in place..Dual monitor mount comes with all mounting hardware, tools, and instructions necessary for assembly. Turn hex bolt on top of gas spring arms to set the counterbalance and hold screens in place..Contemporary contours with a color scheme that will never go out of style.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.This monitor arm mount helps you increase productivity and clear up extra space on your desk.

Save workspace and increase productivity by mounting two monitors, stacked, above your desk. This sturdy and sleek dual-monitor mount raises two displays off the surface of your desk or table, to save space while increasing your productivity. With its steel construction, the dual-monitor mount attaches easily to your desk or table to securely hold two monitors, each up to 27", stacked vertically. Configure your displays to enhance productivity. The dual-monitor mount holds two displays, one above the other, in a vertical configuration. The height of the monitors can be adjusted, as required, along the 27.5" (700 mm) pole. With the dual-monitor mount, you can work more comfortably, reducing neck and eye strain without having to look side to side when comparing files or reviewing reference material on your screens. It's ideal for numerous applications including web design, coding, creating and reviewing files, and many others. The monitor mount saves valuable desk space and lets you work clutter-free, which is a welcome addition in numerous office environments including business, healthcare, and financial settings. Adjust your screens to the ideal position. The monitor mount enables smooth, effortless +45°/-45° tilt and +45°/-45° swivel, making it easy to reduce glare and find the perfect viewing angle. It can also rotate a full 360° giving you flexible viewing options. Rugged steel design. The heavy-duty steel monitor mount holds your two monitors securely in place to protect your investment, and provide long-lasting performance. The dual-monitor mount supports two displays 13" to 27" (330 to 686 mm) in size and 22.1 lb. (10 kg) in weight per monitor. The surface finish features a powder coating to help resist scratches. Easy installation. The dual-monitor mount makes it easy to mount your VESA mount compatible displays above your desk, table or other surfaces, using the included C-clamp or grommet mount. For easier mounting, the VESA mount features notches that let you pre-set the mounting screw, then slide the monitor into place and tighten the screw. To help keep your work area free of clutter, the monitor mount also features cable clips that keep your cables neatly out of sight. The ARMDUALV is backed by a StarTech.com 2-year warranty and free lifetime technical support..Mount two monitors vertically to save space and increase your comfort.Desktop monitor mount supports two displays up to 27" (686 mm) in size and 22.1 lb. (10 kg) in weight per monitor.Heavy-duty steel construction.Made of steel.-45 to 45-degree tilt, -45 to 45-degree pan, and -45 to 45-degree rotation adjustment options enable optimal viewing.Dimensions: 35.43"H x 4.57"W x 4.7"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.2-year manufacturer limited warranty

Customize your workstation, and free up space, with this dual-monitor stand. Mount two monitors on the dual articulating monitor arms, and adjust your displays for optimum viewing with a wide range of motion. The free-standing base gives you flexibility in placing your setup within your workspace. Work more efficiently with a dual-monitor setup. The horizontal dual-monitor stand lets you mount two VESA mount (75x75, 100x100 mm) monitors, up to 32", with a maximum weight capacity of up to 17.6 lb./8 kg per display. Mounting your displays on a dual-monitor stand above the desk surface enables you to adjust your display height, position and viewing angles for an ergonomic workspace. The swiveling arms provide maximum viewing flexibility, letting you work in comfort. It's easy to customize your setup, placing your monitors at the ideal height. Simply adjust the display height along the 16.7" (42.4 cm) pole. You can align your monitors perfectly with the micro-adjustment feature. Extend the dual articulating arms up to 18.4" (46.8 cm) to position your monitors in the ideal position. Tilt your monitors +90/-40 degrees and swivel +90/-90 degrees for ideal viewing. Rotate your displays for portrait or landscape viewing. Neatly route your cables, keeping them organized and out of view, with the cable-management channels..Raise your monitor to a comfortable viewing height with this monitor stand.Supports up to 32" monitors for versatile use.Made of aluminum.-40 to 90-degree tilt, -40 to 90-degree pan, and -40 to 90-degree rotation adjustment options enable optimal viewing.Weighs 10.6 lbs..Dimensions: 21.65"H x 36.46"W x 4.57"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black/silver.5-year manufacturer limited warranty

Bring balance and flexibility to your dual-monitor setup with DM2 monitor arm. Built for creators, professionals, and multitaskers alike, DM2 supports two displays up to 35" each, giving you the space and precision to work your way. Each arm glides effortlessly into position with spring-assisted adjustment, letting you fine-tune height, tilt, and swivel for perfect alignment. When you’re ready to switch things up, 360° rotation makes it easy to move between portrait and landscape views. Setup is straightforward with a top-mounted clamp that secures from above the desk - no more under-desk struggles. Quick-release VESA plates simplify monitor attachment, while built-in cable management keeps your workspace looking clean and organized. Designed for comfort and built to last, DM2 turns any desk into a dynamic, clutter-free command center..Fits most flat, curved and ultrawide computer monitors from 17” to 35”.Supports monitors weighing 4.4 lb. (2 kg) to 22.1 lb. (10 kg).Accommodates VESA sizes of 75x75 and 100x100.Monitor can be tilted +/- 75° upward or downward.90° of swivel left or right.Each arm provides up to 18.9” (48 cm) of reach.360° monitor rotation for vertical and horizontal screen orientation.Adjustable tension spring system provides 9.9” (25.1 cm) of fingertip height adjustment.Integrated cable management.Aluminum construction with a durable painted finish.Installation manual and all monitor mounting hardware for either desk edge or grommet hole installation is included.Five year manufacturer's warranty

The Atdec AWMS-2-BT75 is a super heavy-duty dual vertical monitor mount with heavy-duty F-clamp desk fixing. The mount holds two super ultrawide displays in a vertical stack configuration. This mount is perfect for high-performance computer setups used by gamers, software developers, traders, and designers. Any application with dense visual data will benefit from mounting two ultrawide displays with the Atdec AWMS-2-BT75..Raise your monitor to a comfortable viewing height with this heavy-duty dual vertical monitor mount.Holds two ultrawide monitors up to 57".Height adjusts from 0.4" to 22.6" for comfortable viewing.Comes in black and made of aluminum.Tilt functions enable adjustments for comfortable viewing.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Rubber feet protect desk surface.Compatible with flat screens with maximum weight up to 55 lbs. or curved screens with maximum weight up to 40 lbs..10-year manufacturer limited warranty

Upgrade your workstation with the Mind Reader Dual Monitor Desk Mount, designed to support two screens from 13 to 32 inches. Each arm supports up to 17.6 lbs. and is compatible with VESA 75x75mm and 100x100mm mounting patterns, making it ideal for home offices, gaming setups, and professional workspaces. Enjoy full motion adjustability with 180° screen rotation, ±90° swivel, and ±45° tilt for personalized viewing comfort. Integrated cable management keeps your desk tidy, while the easy installation system allows for quick setup and release. This mount boosts productivity, improves posture, and frees up valuable desktop space—making it a smart solution for any modern workspace..Universal Fit: Supports two monitors from 13" to 32" with VESA 75x75mm or 100x100mm compatibility.Full Range Motion: Offers 180° rotation, ±90° swivel, and ±45° tilt for optimal screen alignment.Strong & Secure: Each arm holds up to 8kg (17.6 lbs.) to support heavy-duty monitor setups.Cable Management Included: Integrated channels keep cords organized and out of sight.Fast Installation: Clamp-style mount allows quick setup and release with no hassle.Ergonomic Dual Monitor Mount with Full Motion Flexibility

This sleek monitor desktop stand raises two displays off the desk surface, thus saving workspace and creating a productive display configuration to increase productivity. It is designed to mount two 13"-27" monitors in horizontal line and the weight capability for each one is 22 Ibs. It can rotate for 360°, which allows portrait and landscape viewing. It also allows smooth, effortless tilt motion for any direction, making it easy to reduce glare and find the perfect viewing angle. You can also adjust the monitor vertically to a desired position. It's quick and simple that allows the user to move the displays freely along the horizontal rail without using any tools..MI-1781 is compatible with most screens between 13" and 27".Height adjustable, articulating arms made of high strength steel.Load Capacity: 22 lbs. per monitor (44lbs total).Height adjustable through the sliding of the arms on the pole.Compatibility: 75mm x 75mm and 100mm x 100mm VESA patterns.Heavy duty weighted V-base for stable architecture.Tilt: Up or Down 15 degrees.Rotate: 360 degrees.Height adjustable up to 16 inches..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.The MI-1781 monitor arm mount helps you increase productivity and clear up extra space on your desk

Monitor Mount Desk/Grommet Mount Tool-less Assembly For up to 27" Monitors. Create an ergonomic workspace with this premium desk-mount dual monitor arm, for monitors up to 27" each. The two articulating monitor arms with dual-swivel action offer a wide range of motion side to side. The attractive silver finish enhances the aesthetics of your workspace. Enjoy a Wide Range of Motion to Work in Comfort The dual articulating monitor arms offer a wide range of motion on several axes. It provides effortless motion to adjust the position of your monitors. Sleek and Stable Aluminum Design The robust aluminum design provides stable support for your monitors. The computer-monitor desk mount supports two VESA mount monitors (75x75, 100x100) with a weight capacity of up to 22 lb. (10 kg) per display. The cable-management channel helps to keep your workstation neat and tidy. Adjust your Viewing Angle Share your screen with ease. The double monitor mount offers a full +180-degree / -180-degree pan, to move your screen left or right. It tilts freely +90 / -15 degrees to adjust the angle up or down. Rotate your screens for landscape or portrait viewing. Height Adjustment Work in comfort. This height-adjustable monitor mount lets you raise or lower the monitor arms along the pole, with a range of up to 6.3" (160 mm) Tool-less Assembly The fully assembled desk clamp and pole, plus quick slide-and-click connections, ensure easy assembly. It also saves time when setting up multiple units. The dual-screen mount gives you the option of desk clamp or grommet hole mounting (hardware included). The TAA compliant ARMDUALPS is backed by a StarTech.com 10-year warranty and free lifetime technical support..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 27" monitors for versatile use.Made of aluminum.-15 to 90-degree tilt, -15 to 90-degree pan, and -15 to 90-degree rotation adjustment options enable optimal viewing.Weighs 12.57 lbs..Dimensions: 20.47"H x 7.5"W x 8.66"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in silver.Rubber feet protect desk surface.5-year manufacturer limited warranty

SIIG's Articulated Freestanding Dual Monitor Desk Stand - 13"- 27" enables you to mount two flat panel monitors to instantly achieve an ergonomic working environment. It supports two flat panel monitors from 13" to 27" with weight up to 17lbs each. Durable steel articulating folding arms allow user to adjust the monitors to desirable positions for optimal viewing comfort. And it also comes with clip-on cable guides to keep cables organized and protected. This high quality freestanding monitor desk stand can be freely placed and relocated without being locked in a fixed area. It is an ergonomic and versatile monitor desk stand to free up desk space, improve viewing comfort and increase productivity..Raise your monitor to a comfortable viewing height with this monitor mounting kit.Supports up to 27" monitors for versatile use.Made of steel.-45 to 45-degree tilt, -45 to 45-degree pan, and -45 to 45-degree rotation adjustment options enable optimal viewing.Weighs 10.8 lbs..Dimensions: 18.3"H x 28.46"W x 12.4"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.5-year manufacturer limited warranty

Upgrade your WorkFit to hold two LCDs above the desktop. Offers 5" of height adjustment. Easily lift LCD screens to proper height for ergonomic comfort..Holds displays above worksurface, freeing up space.Cost-effective height-adjustable mounting solution.Simple installation and effortless operation.Patented CF motion technology provides premium ease-of-use display adjustment.Increase viewing comfort by reducing eye, back and neck strain

Achieving the perfect desktop setup is about striking a balance between style and functionality. The DMS2000 is designed to do exactly that. Combining industrial influences with a minimalist design, this dual gas shock monitor mount allows for finger-tip adjustments to be made to the height and orientation of your screens. Raise, tilt, swivel and rotate your monitors on the fly to ensure they’re always in an ideal position. The detachable base provides a seamless connection to your desk, while its easy-to-use clamping mechanism can be secured to any ledge or grommet hole up to 2 inches thick. To ensure a clutter-free setup, the DMS2000 also includes cable management clips to conveniently route your cables..Fits most flat panel computer monitors from 17” to 32”.Supports two monitors weighing 3.3 lb (1.5 kg) to 16.5 lb (7.5 kg) each.Accommodates VESA sizes of 75x75 and 100x100.Ball joint provides a 25° viewing angle in any direction.360° of swivel and monitor rotation for vertical and horizontal screen orientation.Dual arms provide up to 23.3” (59.3 cm) of reach per arm, depending on screen size and orientation.Adjustable tension gas shock system provides 9.5” (24 cm) of fingertip height adjustment.Integrated cable management.Aluminum construction with a painted finish.Installation manual and all monitor mounting hardware for either desk edge or grommet hole installation is included.Two year manufacturer's warranty.Not your average monitor mount.

Save space by mounting two monitors on your wall - Wall Mount Dual Monitor Arm - Articulating - Works on VESA Mount monitors incl Acer & HP & Samsung - Steel - Supports two 15“ to 24” Monitors - Both monitors are mounted on a single arm so they move together in perfect unison to stay aligned - Mounting arm extends out from the wall up to 23" (585 mm) or tucks back to 6.5” (165 mm) from wall for a low-profile look - Dual monitor wall mount / Dual Monitor Arm / Computer monitor wall mount.Wall mount two 15“ to 24” monitors to save space.Adjust your monitors in unison, to keep your screens aligned.Mounting arm extends out from the wall up to 23" (585 mm), or tucks back to 6.5” (165 mm) from wall for a low-profile look.Heavy-duty steel construction.Swivels up to 180 degrees for optimal viewing.Rotate your monitors up to 360 degrees for landscape or portrait viewing.Supports weight capacity of 11 lb. (5 kg) per monitor.Dimensions: 7.2"H x 2.76"W x 25.2"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty.Save space by mounting two monitors on your wall

MI-45111B dual monitor mount features two gas spring arms for smooth full motion monitor adjustments. The extra long mounting pole measures 20.5”, allowing for a large height adjustment range. From height adjustment, to monitor tilt, swivel and rotation, this monitor desk mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and clearing up more desk space by elevating the monitors. This premium dual monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The c-clamp base easily attaches to any desk measuring.79” to 2.36” thick, making it an easy addition to any workspace. It also includes a grommet base that securely attaches to a desktop hole opening. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Computer Dual Monitor Desk Mount fits most of 13" -27" Screens.Tilt, Swivel, Height Adjustable and Rotating Features.Each monitor can tilt up or down 105 degrees and rotate 360 degrees.Load capacity 39.6 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Experience the productivity benefits of using two displays: two LCD monitors or pair an LCD with laptop by purchasing the laptop tray attachment..Save valuable desk space and easily move your monitor to a comfortable height for viewing reducing eye, back and neck strain..Made from aluminum alloy and metal materials holds monitors up to 20 lbs. and ≤27"..Highly adjustable arm moves smoothly up and down through 10.6 in height adjustment range with just a touch..Experience the productivity benefits of using two displays: two LCD monitors or pair an LCD with laptop by purchasing the laptop tray attachment..Arm moves in and out and side to side with ease so you can move your monitor out of the way when not in use or share your screen with others..Easy to install comes with both clamp and grommet hardware included..Internal cable management route cables neatly under arm..VESA MIS-D 75x75/100x100mm compliant monitors Up to 20 lbs. and <= 27 in.5 Year Warranty.Free up space on your desk and easily move dual monitors into a comfortable height for viewing.

Quickly install this Dell dual monitor arm - MDA20 for a comprehensive monitor and system mounting solution. Dell Quick Release lets you snap on the Dell UltraSharp and P-Series monitors onto the arm easily without tools, and select OptiPlex Micro, Ultra and Wyse systems can be installed as well for an all-in-one solution. Virtually tool-free installation makes deploying the Dell dual monitor arm simple, while the counterbalance indicator on the side lets you replicate identical tension settings across multiple units rapidly. You can install other monitors with optional VESA mount adapter plates for complete versatility with select PC systems..Dual monitor arm is built to minimize wasted space behind the arms so that you get plenty of usable area.Supports 19"-27" monitors weighing between 4.8 to 22.0 lbs..C-clamp is perfect for desk edges, while the grommet mount only needs a 2"Dia. hole to support monitors up to 27" in size.Comes powder-coated in black.Height, tilt, pivot, depth, and swivel adjustments make it easy to move the monitors individually on this dual-monitor arm precisely to your preferred monitor setup.Weight is 19 lbs..Dimensions: 8.27"H x 22.04"W x 15.75"D.VESA mounting pattern: 100 x 100mm.Comes with the World's first swivel switch that allows you to change the swivel angle without having to remove any part of the monitor arm.Simply adjust the swivel angle on the arm to 180 or 360 degrees conveniently with a flip of the switch.Virtually tool-free installation makes deploying simple, while the counterbalance indicator on the side lets you replicate identical tension settings across multiple units rapidly.You can install other monitors with optional VESA mount adapter plates for complete versatility with select PC systems.Ample space in the cable management slot with cable clips keep up to 10 wires in place, offering a clean desk experience.This monitor arm also has an Allen key that is conveniently tucked underneath the arm cover so that you will not lose it.Package includes: dual-monitor arm, Dell VESA adapter plate, Allen key, and documentation.3-year manufacturer limited warranty

Premium Quality Durable Gas Spring - Provides smooth, precise and effortless height adjustment for the perfect viewing angle. Universal Fit - Compatible with VESA mounting patterns 75x75 and 100x100, fits most 13" to 32" flat and curved monitors. Full-motion Articulating Monitor Arms - Supports height adjustment up to 25.3", 270° pan swivel, 360° arm swivel, monitor tilt angles of +/- 90° (upward/downward), and +/- 90° (left/right) pan angle. Front Desktop Accessible USB & Audio Connectors - Provides quick access for your USB device and speaker/microphone. Desktop Mounting Options - C-clamp and grommet mount bases are included for easy and quick installation. Detachable and Rotatable VESA Plate - Allows easy monitor installation or removal. Supports portrait or landscape monitor orientation..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use.-90 to 90-degree tilt, -90 to 90-degree pan, and -90 to 90-degree rotation adjustment options enable optimal viewing.Weighs 17.97 lbs..Dimensions: 44.1"H x 25.3"W x 5.75"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in gray.Rubber feet protect desk surface.3-year manufacturer limited warranty

The Dual Aluminum Heavy Duty Monitor Mount with USB and Audio Ports is a premium workspace upgrade designed to support monitors up to 35 inches, offering ergonomic height adjustment to reduce strain and improve posture. Crafted from durable aluminum with a sleek white finish, this mount features full rotation, tilt, and swivel capabilities for customizable viewing angles. It includes integrated USB and audio ports for convenient connectivity, and rubber feet to protect your desk surface. Compatible with VESA 100 x 100mm mounting patterns, it measures 29.53"H x 43.07"W x 5.04"D, weighs 19.4 lbs., and comes backed by a 2-year manufacturer limited warranty—making it an ideal solution for professionals seeking both functionality and style..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 35" monitors for versatile use.Made of aluminum.Rotation, tilt, and swivel functions enable adjustments for comfortable viewing.Weighs 19.4 lbs..Dimensions: 29.53"H x 43.07"W x 5.04"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in white.Rubber feet protect desk surface.2-year manufacturer limited warranty.Maximize Comfort and Connectivity with the Dual Aluminum Heavy Duty Monitor Mount – Built for Performance, Designed for Versatility

Arrange a keyboard, work surface, and two screens to create an ergonomic workstation with this dual-arm stand, which can easily lift monitors up to 20 inches off the desktop. The arms of this Ergotron WorkFit-A dual monitor stand can be used to swivel the whole workstation to either side and to keep screens out of the way when they are not in use..This dual monitor stand with tray and worksurface clamps to the rear or side of most surfaces and enables an effortless sit-and-stand work style.Supports up to 24" monitors for versatile use.Lift range: monitors and keyboard tray adjust 20" in tandem, monitor adjusts 5" independently.Durable, easy-to-clean exterior composed of aluminum, high-grade plastic, and powder-coated painted steel.180-degree pan, 360-degree rotation, and 30-degree tilt adjustment options enable for optimal viewing.Includes a worksurface for additional space and a keyboard tray with three tilt positions that sits below the desktop height for the best ergonomic positioning.Each arm securely holds up to 10 lbs. to fit most monitors (25 lbs. total load on height-adjustment assembly).Overall dimensions: 45.25"H x 28.8"W x 43.7"D (fully extended).Compatible with standard VESA mounting patterns: 100 x 100 and 75 x 75.Meets VESA MIS-D mounting standard.Black/polished aluminum finish completes overall aesthetic appeal.Easily clamps to the front of any surface 0.78–2.6" thick.5-year manufacturer limited warranty.Customize screen viewing for sitting or standing work with this Ergotron WorkFit-A dual monitor stand.

MI-7904 is affordable solution for working while sitting or standing without having to buy an entirely new desk. Designed to simply clamp to your existing workstation, MI-7904 gives you various placement options for convenient use of two monitors and your laptop, notebook and keyboard. Gas spring-assisted lift mechanism that allows you to raise and lower it almost effortlessly in just seconds..This full motion, sit stand workstation allows to work standing up or sitting down with the height adjustable arm that can travel 19.5" up or down..The dual monitor bracket fits monitors from 20" up to 27" with standard VESA patterns 75x75 and 100x100, and each VESA head supports 13.2 lbs. per monitor..A versatile attachment base can be converted to a c-clamp or grommet base that attaches to any desk or table edge up to 3.1" thick in just a few minutes..The monitor bracket tilts +/- 15 degrees and rotates +/- 180 degrees, while the spring arm swivels +/-90 degrees and is height adjustable by 19.5"..Features a 26.2" L x 10.2" D keyboard that conveniently folds away, and the station also includes an organizer tray and built-in cable management ducts..Supports VESA Patterns: 75x75mm and 100x100mm.Supported by manufacturer's limited lifetime warranty.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Monitor and Desk Mount specialist Mount-It! will change the way you work! No need to buy a complete sit-stand desk. This height-adjustable desk mount clamps to the edge of your existing desk and allows you to work comfortably from either a sitting or standing position.

This is a dual 18” arm combination attached to a 15.7” post. The two arms can be installed in a dual row side-by-side or back-to-back configuration. Display height, optimal viewing angle and orientation can be set to individual requirements. Built from lightweight and yet durable aluminum, the mount can be easily recycled at the end of its life. Ideal for displays up to 32” in a landscape or portrait orientation. Perfect for screen real estate-demanding applications and multi-user environments in applications where display height does not require frequent adjustment..Dual arm monitor mount that can be installed in a dual row side-by-side or back-to-back.Ideal for displays up to 32".The AWMS-2-4640 is a dual 18" arm combination attached to a 15.7" post.Built from lightweight and yet durable aluminum. Color: Silver.No spring assisted height adjustability. Tilt +45/-25 degrees, 360 degree rotation around poll. Pan adjustment, portrait to landscape screen rotation, and height adjustable..14.92 lbs..Package dimensions: 16.00" x 12.50" x 8.50".VESA 75x75 to 100x100

Find your best view, save desk space and discover your most productive self, thanks to the LX Dual Stacking Arm. This dual monitor mount lets you position each screen separately for a new level of flexible working. Project wrapped up? Reclaim a space full of opportunities by folding the arms and pushing them aside during a much-needed screen break..Monitor Mount & Stand Type: LX Dual Stacking Arm.Monitor Size Supported & Number of Arms: 24" Screen Support, 2.Adjustable Minimum and Maximum Height (Inches): 13.True Color & Material: Black, Metal.Articulation: Tilt Angle 75°, Rotation Angle 360°.Storage options: Not Applicable.Weight (lbs.): 14.0.Mount Bracket or VESA Pattern: MIS-D

Gas spring assisted full-motion (tilt, swivel, rotate, and height adjustment) articulating dual monitor desk mount..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 35" monitors for versatile use.Height adjusts from 0.4" to 23" for comfortable viewing.Made of aluminum.Rotation, tilt, and swivel functions enable adjustments for comfortable viewing.Weighs 18.94 lbs..Dimensions: 29.53"H x 43.7"W x 5"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.2-year manufacturer limited warranty

This desk mount dual-monitor arm lets you mount two 13" to 27" VESA mount monitors, each weighing up to 17.6 lb. (8 kg), onto a single low-profile base. It gives you flexible desk-clamp or grommet-hole mounting, letting you save space while creating an ergonomic workspace in any office environment. Free Up Desk Space­: With a stable dual-arm design, the double-monitor mount lets you create more usable work space by mounting your monitors side by side on a single base. The screen mount features a flat low-profile back that lets you position your displays against a wall or cubicle wall. Optimal Viewing: The computer monitor desk mount features adjustable height along the pole. The smooth +/- 30° tilt motion and +/- 30° swivel make it easy to find the optimal viewing angle. You can also rotate your display 360° for portrait or landscape viewing, and make sure your displays are perfectly aligned using the micro-adjustment knob. Flexible Installation: The dual-monitor arm is easy to install, with the desk-clamp or grommet mount (hardware included). Integrated cable management keeps your workspace organized. It works well with most desks, including sit-stand workstations. Boost Productivity with Multiple Monitors: Adding two monitors gives you the extra screen space you need to simplify multitasking and maximize your productivity. ARMBARDUOG is backed by a 3-year StarTech warranty and free lifetime technical support..Save space by mounting two monitors up to 27" onto a single base (max. weight 17.6 lb. / 8 kg).Keep monitors aligned with micro-adjustment.Work comfortably with adjustable height, +/- 30°tilt, +/- 30°swivel and 360° rotation.Versatile use with desk-clamp or grommet-hole mounting.Place monitors close to a wall/cubicle wall, with a low-profile design

Maximize the space available on desks by using this mounting arm for flat-screen monitors. This Ergotron mounting arm lifts screens off desk surfaces and frees up space for supplies or documents to be stored..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 27" monitors for versatile use.Lets you easily adjust height up to 13".Made of aluminum for durability.75-degree tilt, 360-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Securely holds up to 40 lbs. to fit most monitors.Compatible with the standard VESA mounting patterns: 100 x 100mm and 75 x 75mm.Comes in black finish.10-year manufacturer limited warranty.Work on more than one computer screen at a time with this Ergotron LX Dual Side-by-Side arm for flat screen monitors.

Planar's dual monitor stand maximizes the benefits of two monitors by making it easier to toggle between applications with the seamless display setup. The stand helps to organize displays cables with a cable organizer, and can tilt, swivel, rotate, and height adjust..Up to 66 lb..Up to 24" LCD Monitor.Black.Desk-mountable

Transform a working surface into an adjustable sit-and-stand workstation using this stand. The keyboard tray offers two tilt positions, so it's easy to find the ideal height for comfortable use behind a monitor. This Ergotron sit-and-stand ergonomic stand supports up to 25 pounds, making it an ideal choice for two 24-inch monitors, and it has 360-degree rotation for quick screen adjustments..This sit-and-stand easy-to-use dual monitor stand with a tray allows you to instantly raise or lower your keyboard and two displays in one simple motion, keeping your system stable as you work.Supports up to 24" monitors for versatile use.Lift range: monitors and keyboard tray adjust 18" in tandem, monitor adjusts 4.8" independently, 22.8'' maximum monitor height adjustment.Durable, easy-to-clean exterior composed of aluminum, high-grade plastic, and powder-coated painted steel.A 360 degree rotation allows monitors to be oriented vertically or horizontally.Includes a worksurface for additional space and a keyboard tray with two tilt positions that sits below the desktop height for the best ergonomic positioning.Each arm securely holds up to 12 lbs. to fit most monitors (25 lbs. total load on height-adjustment assembly).Overall dimensions: 43.5"H x 28"W x 30.2"D (fully extended).Compatible with standard VESA mounting patterns: 75 x 75, 100 x 100.Meets VESA FDMI MIS-D mounting standard.Black finish completes overall aesthetic appeal.Easily clamps to the front of any surface 0.47–2.4" thick.5-year manufacturer limited warranty.Complete Manufacturer Specifications.Perform computing tasks efficiently in comfort with this Ergotron WorkFit-S dual monitor stand.

Mount-It! MI-7996 is an affordable, easy way to convert your existing desk into an ergonomic sit-stand workstation. With C-clamp and grommet mounting options, a 25" tray for a keyboard and mouse, adjustable dual monitor mounts, and a gas spring arm system, the MI-7996 lets you go from sitting to standing in seconds. The height and tilt adjustments ensure you will be able to position your keyboard and monitor in exactly the right place for you. The keyboard tray has plenty of space to fit a keyboard and a mouse side by side, and the heavy-duty steel construction will allow you to enjoy this workstation for years to come..Raise your monitor to a comfortable viewing height with this monitor mount.Compatible with two monitors up to 32".Up to 28" height adjustment to sit or stand while you work.Made of steel.35-degree tilt and 360-degree rotation adjustment options enable optimal viewing.25.7"W tray is large enough for a keyboard and mouse side by side.17.6 lb. weight capacity per monitor.Dimensions: 31.8"H x 37"W.Clamp or grommet mounts.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Tilt and swivel to set a position that is comfortable for you.Great for use in any home or office environment.Supported by manufacturer's limited lifetime warranty

This vertical dual-monitor stand, with its sleek aluminum design, raises two displays off the surface of your desk or table, to save space while increasing your productivity. With its robust construction, the freestanding dual-monitor mount securely holds two VESA mount monitors, each up to 27", stacked vertically. Configure Your Displays to Enhance Productivity: The dual-monitor mount holds two displays, one above the other. You can adjust the height of the monitors along the 28" (710 mm) pole, to work in comfort with your two-monitor setup. Adjust Your Screens to the Ideal Position: The adjustable monitor stand for desks enables smooth, effortless +15/-15 degree tilt and swivel, making it easy to find the perfect viewing angle. It can also rotate a full 360 degrees, giving you the flexibility of portrait or landscape viewing. Durable Aluminum Design: The dual-monitor stand securely holds your monitors in place while complimenting your office decor with its black and silver aluminum design. The monitor stand supports two monitors, each up to 27" (686 mm) in size and 17.6 lb. (8 kg) in weight. Easy to Install: The VESA monitor stand is easy to install, featuring quick monitor attachment and removal. It also provides cable management to keep your cables neatly out of sight. ARMDUOVS is backed by a StarTech.com 5-year warranty and free lifetime technical support..Vertical dual-monitor stand supports two displays up to 27" each (max weight 17.6 lb. (8 kg) per monitor).The height of the monitors can be adjusted along the 28" (710 mm) pole.Adjust your screen angle easily with +15°/-15° tilt and +15°/-15° swivel.View your screen in portrait or landscape position with full 360° rotation.Cable management keeps cables neatly out of sight

The j5create JTSA102 is a dual-arm gas spring monitor mount. Each of the arms can hold a screen up to 32" weighing up to 17.6 lbs. Easily adjust your screens to any height. The gas springs allow the screens to swivel 180 degrees, tilt from -45 to 90 degrees, and rotate 360 degrees. Conveniently set your monitors at an optimal angle. This monitor mount gives you the ability to create a more efficient workspace, whether you need extra space or a standing desk setup..Raise your monitor to a comfortable viewing height with this double-arm monitor mount.Each of the arms supports a monitor up to 32" and 17.6 lbs. for versatile use.Comes in black and made of aluminum, steel, and plastic.-45 to 90-degree tilt, -90 to 90-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Weight: 7.05 lbs..Dimensions: 12.6"H x 5.51"W x 18.3"D.Compatible with VESA 100 x 100 and 75 x 75 mounting patterns.Simple to install, the mount includes clear instructions and all necessary tools.Rubber feet protect desk surface.2-year manufacturer limited warranty.WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Enhance productivity and ergonomics with our dual monitor stand, a perfect solution for multi-screen users seeking an organized workspace. Utilize one side for electronics like laptops or printers, freeing up valuable desk space. Tailor the stand to your needs with four adjustable height settings for optimal comfort. Beneath the stand, stash office essentials like pens and notepads, maintaining a tidy workspace. Anti-slip rubber grips secure the stand and safeguard your desk from scratches. Holding up to 40 lbs. (18.1 kg), it's durable and easy to clean with mild soap and water. Lightweight and portable, it's suitable for home or office use, doubling as a shelf for TVs or home theater systems. Part of the Anchor Collection, our dual monitor stand combines style and functionality, making it an ideal gift for various occasions. Whether for a new office setup or a home office transformation, this stand promises to enhance any workspace..Modern and minimal design: The modern design and black color match well with any decor, and the ergonomic, adjustable height works for everyone.Helpful for desk organization: Instead of using multiple stands, this dual monitor stand keeps everything level and organized.Saves your eyes: Reduce eye strain with elevated monitor stands and increase your working efficiency by having both monitors in your sight line at all times.Durable construction: This monitor stand has a weight capacity of 40 lbs. (18.1 kg) and withstands everyday use, plus it’s easily cleaned with a soft cloth and mild soap.Adjustable Height Range – Elevates from 2.55" to 6.5", letting you customize your viewing height for ergonomic comfort..Wide Dual‑Monitor Capacity – Measures 38.5" long × 11" wide to support two monitors with plenty of workspace underneath..Streamline Your Workspace with a Dual Monitor Stand

This premium dual arm computer monitor mount offers an attractive way to display two monitors while saving the most amount of desk space. The Arm easily adjust , allowing you to work in a more comfortable, ergonomically correct position. Staring at a computer screen that's not eye level can cause neck and eye strain, as well as painful back problems. Our patented, high performance monitor mount offers a wide range of features that our competitors don't offer. You will notice the difference right away. Quality craftsmanship, impressive functionality and unparalleled design raise the bar for this mount to the highest level..Arm easily adjust to support an ergonomically correct workstation; sit more comfortably at your desk while reducing neck, eye and back strain.Bearing weight : 4-19.8 pounds per arm.Dual Display mount to keep your desk and workstation clear.Durable hardware supports clamp or grommet installation.Durable polished aluminum construction

Raise your monitors at an ergonomic position and free up valuable desk space with this stacked dual monitor mount. This mount is made from high grade steel built to resist scratches and supports screens up to 17.6 lbs each arm and screen size up to 32". This includes clamp and grommet to fit a variety of desktops. Adjustable height, tilt, swivel and rotation functionalities offer optimal viewing angles. Comes with cable management clips to keep your wires organized..Raise your monitor to a comfortable viewing height with this monitor mount.Supports two up to 32" monitors for versatile use.Adjustable height: 16.5"H for each monitor.Made of heavy-duty, cold-rolled steel.-45-45-degree tilt and -180-180-degree rotation adjustment options enable optimal viewing.-180-180-degree rotation allows monitors to be oriented vertically or horizontally.Support up to 17.6 lbs. on each arm: 35.2 lbs. total.Compatible with: VESA 75mm x 75mm and 100mm x 100mm mounting patterns.Clamp or grommet fixation.Cable management.Detachable monitor mounting plate.Comes in black.Supported by manufacturer's limited lifetime warranty

Create a fully adjustable side-by-side monitor configuration that lifts both LCD screens simultaneously to where they’re easier to see while reclaiming valuable desktop space..Monitor Mount & Stand Type and Use: Desk Mount.Monitor Size Supported & Number of Arms (If more than 1): 25", Dual Direct Arm.Adjustable Minimum and Maximum Height (Inches): 13".True Color & Material of Item: Polished Aluminum.Articulation; Pivot Angle (Degrees), Tilt Angle (Degrees), Rotation Angle (Degrees), Swivel Angle (Degrees) & Viewing Angle (Degrees): Tilt Angle 30°, Rotation Angle 360°.Weight (lbs.): 13.96 lbs..Mount Bracket or VESA Pattern: MIS-D

Upgrade your workstation with the Mind Reader Dual Gas Spring Monitor Arm, designed to hold two monitors between 13 and 32 inches. Each arm supports up to 19.8 lbs. (9 kg), making it ideal for office professionals, creatives, and gamers alike. This flexible desk mount allows each screen to rotate ±180°, swivel ±180°, and tilt ±65°, giving you full control over your viewing angle. The counterbalance gas spring mechanism enables smooth, one-touch adjustments for a more ergonomic, productive workflow. Compatible with VESA 75x75mm and 100x100mm mounting patterns, this dual monitor arm installs securely via C-clamp or grommet base and includes integrated cable management to keep cords organized and out of sight..Dual Monitor Support: Holds two 13–32 inch screens, each up to 19.8 lbs. (9 kg), for side-by-side viewing.Full Motion Control: Each arm rotates ±180°, swivels ±180°, and tilts ±65° for customized positioning.Ergonomic Adjustment: Gas spring system offers smooth height and angle changes to reduce strain.VESA Compatible: Fits standard 75x75mm and 100x100mm patterns with C-clamp or grommet mount options.Integrated Cable Management: Built-in channels hide wires for a cleaner, more organized workspace.Dual Gas Spring Monitor Arm for Enhanced Ergonomic Comfort

Transform your workspace with the Ergotron LX Pro Dual Side-by-Side Monitor Arm. Designed for modern professionals, this sleek and durable aluminum arm supports two monitors up to 27", offering unmatched flexibility and ergonomic comfort. With Constant Force™ technology, you can effortlessly lift, tilt, pan, and rotate each screen for optimal viewing angles that reduce strain and boost focus. The side-by-side configuration maximizes desk space while the streamlined cable management keeps your setup clean and organized. Whether you're working, designing, or multitasking, the LX Pro delivers style, performance, and reliability—all backed by a 10-year warranty. Upgrade your desk and elevate your productivity..Built for dual monitors with side-by-side desk arm configuration.Supports screens up to 27" for efficient multitasking setups.Raises monitors with 13" lift for ergonomic viewing comfort.Crafted from durable aluminum with a sleek black finish.Allows 360° rotation, 85° tilt, and full swivel for flexible positioning.Clears desk space with compact base and clean cable routing.Weighs 13.7 lbs. for sturdy yet manageable installation.Fits VESA 100 x 100 mm and 75 x 75 mm mounting patterns.Measures approx. 17" H × 20" W × 5" D for space-saving design.Meets ANSI/BIFMA standards for quality and air safety.Ergotron 10-year limited warranty.

The AMR2CV is a clamp-style monitor stand with an adjustable height that supports up to 2 LCD monitors. The vertical and clamp Construction of this mount allows for more work space and a great number of advantages for those wanting to create a more ergonomic and functional environment. SEE MORE and DO MORE™ with features like: Arm Angle-Adjust, Smart Torque Adjust, Aluminum Alloy Structure, Easy Installation, 90 degrees rotation and Height Adjust. In addition to these features, the device is also compatible with VESA 100a-100/75X75 and suitable for monitor sizes 15" to 24"..Compatibility: 2 x LCD Monitor.Country of Origin: Taiwan.Device Supported: Flat Panel Display.Made of aluminum.-20 to 20-degree tilt and 360-degree rotation adjustment options enable optimal viewing.360-degree rotation allows monitors to be oriented vertically or horizontally.Weighs 6.53lbs..Dimensions: 30"H x 6.2"W x 5.7"D.Compatible with: VESA 100 x 100, 75 x 75 mounting patterns.Comes in black.3-year manufacturer limited warranty

This incredibly versatile product supports up to two 24" monitors each with a maximum individual weight of 26.5 lbs. Not only will this strong and sturdy mount have no trouble holding VESA certified 75x75 or 100x100 monitors, (fitting the above criteria), it is also extremely adjustable! Each monitor can be placed at a different height to accommodate different sized monitors. Both monitors have 360 degrees rotation. Also included is a +/- 20 degrees tilt in any direction Individually for BOTH Monitors, ensuring maximum user comfort. Height adjustable, with a maximum height of 13" from the desk to the center of the mounting device. Studies show that dual monitors can increase productivity by up to 50%..Compatibility: 2 x LCD / LED Monitors.Country of Origin: Taiwan.Device Supported: Flat Panel Display.Classic Desk Stand.Maneuverable and reliable, stand mounts are the most popular mounting choice for monitors..Can be moved around your desk, no unscrewing necessary.Weighs 6.92lbs..Dimensions: 9.46"H x 26.46"W x 14.57"D.Compatible with: VESA 75, 100 mounting patterns.Comes in black.3-year manufacturer limited warranty

Find your best view, save desk space and discover your most productive self, thanks to the LX Desk Dual Direct Arm. The low-profile monitor cross-bar uses a compact range of motion to keep your space, your space. Project wrapped up? Reclaim a space full of opportunities by folding the arms and pushing them aside during a much-needed screen break..Monitor Mount & Stand Type and Use: Dual Direct Arm for Work Station.Monitor Size Supported & Number of Arms (If more than 1): 25", Dual Direct Arm.Adjustable Minimum and Maximum Height (Inches): 13".True Color & Material of Item: Matte Black

SIIG's Easy-Adjust Dual Monitor Desk Stand enables you to mount two monitors side-by-side to instantly create an ergonomic working environment. The premium quality aluminum mounting arms are built to last and easily support two monitors from 13" to 27" (measured diagonally) with weights up to 17.6 lbs. each. A unique mounting bracket with detachable VESA plate is smartly designed to simplify the installation procedure and makes mounting the monitors to your desired position quick and manageable. User-friendly adjustment knobs are integrated to allow horizontal and vertical adjustments for maximum viewing comfort. The heavy-duty counter-balanced base ensures stability and allows easy re-positioning around the desktop. Clip-on cable guides keep cables and wires neat and organized. This high-quality, easy-to-use dual monitor desk stand is a great workspace organizing tool to provide ergonomic comfort, free up desk space, and increase productivity..Fits 13" to 27" Monitors: Accommodates dual monitors ranging from 13 to 27 inches, supporting up to 17.6 lbs. each.Ergonomic Design: Enhances your workspace with side-by-side monitor setup for improved comfort and productivity..Flexible Adjustment: Allows +/- 15° tilt and 360° rotation for optimal viewing angles in portrait or landscape orientation..Premium Quality Aluminum: Durable mounting arms ensure long-lasting support and stability..Detachable VESA Plates: Simplifies installation with removable VESA plates compatible with 75x75mm and 100x100mm mounting patterns..Cable Management: Integrated clip-on cable guides keep your workspace tidy and organized..Heavy-Duty Base: Counter-balanced base provides stability and easy repositioning around the desktop..User-Friendly Adjustment Knobs: Quick and easy horizontal and vertical monitor positioning for maximum viewing comfort.

This cart is ideal for use as a mobile computer/laptop station at the office, home, hospitals, showroom, and classroom. Carefully designed platforms provide ample space for monitors, keyboards, mouse pad, a PC tower, and a printer. It comes with a dual monitor mount that is easy to install using the c-clamp base, and can be easily taken off at any time. Easy-roll casters move in every direction, allowing it to be conveniently relocated from room to room. The locking casters allow the cart to be stationary or mobile when desired. All necessary hardware and installation instructions are provided for assembly..Raise your monitor to a comfortable viewing height with this monitor cart.Supports up to 27" monitors for versatile use.-80 to 80-degree tilt, -80 to 80-degree pan, and -80 to 80-degree rotation adjustment options enable optimal viewing.Total weight capacity: 132 lbs. (33 lbs. per shelf).Compatible with: VESA 75 x 75, 100 x 100(mm) mounting patterns.Comes in gray.Supported by manufacturer's limited lifetime warranty

The StarTech.com® ARMSLIMDUO dual monitor mount supports two 12" - 30" monitors, side-by-side. It features two independent arms with full-motion articulation to adjust your dual-monitor setup easily. This monitor mount provides two USB pass-through ports and two 3.5 mm audio ports for added connectivity. It supports up to 8 kg weight per mounting arm. This monitor mount has aluminum construction for enhanced durability. It offers 360 deg rotation around the support post and at the elbow. This monitor mount comes with integrated 4' 6" cables for USB and audio pass-through ports..Dual monitor mount for clutter-free workspace.Maximum size: 12" to 30", Load capacity: 17.7 lbs..Material: Durable aluminum construction.Pan angle: 180 deg, Tilt angle: 90 deg/ -65 deg down, Rotation angle: 360 deg, Swivel /pivot: 135 deg around the support post 360 deg at the elbow.Color: Black.VESA mount standard: 100 x 100, 75 x 75, Certifications and standards: RoHS.Maximum arm extension: 22.3", Maximum arm span: 44.7".Two independent arms with full-motion articulation and spring-assisted height adjustment.Two USB pass-through ports and two 3.5 mm audio ports.Landscape to portrait screen rotation.Hidden cable management hide cables for a clean installation.Integrated 4' 6" cables for USB and audio pass-through ports to hide cables for a clean installation.Mount on a desk or table using a C-clamp.Includes: One mounting arm, two desk clamps, two desk clamps, two VESA monitor mounts, eight M4 x 12 mm screws, eight M4x30 mm screws, eight spacers.Comes with 2 years warranty

SIIG's Easy-Adjust Dual Monitor Desk Stand enables you to mount two monitors side-by-side to instantly create an ergonomic working environment. The premium quality aluminum mounting arms are built to last and easily support two monitors from 13" to 27" (measured diagonally) with weights up to 17.6 lbs. each. A unique mounting bracket with detachable VESA plate is smartly designed to simplify the installation procedure and makes mounting the monitors to your desired position quick and manageable. User-friendly adjustment knobs are integrated to allow horizontal and vertical adjustments for maximum viewing comfort. The heavy-duty counter-balanced base ensures stability and allows easy re-positioning around the desktop. Clip-on cable guides keep cables and wires neat and organized. This high-quality, easy-to-use dual monitor desk stand is a great workspace organizing tool to provide ergonomic comfort, free up desk space, and increase productivity..Fits 13" to 27" Monitors: Accommodates dual monitors ranging from 13 to 27 inches, supporting up to 17.6 lbs. each.Ergonomic Design: Enhances your workspace with side-by-side monitor setup for improved comfort and productivity..Premium Quality Aluminum: Durable mounting arms ensure long-lasting support and stability..Flexible Adjustment: Allows +/- 15° tilt and 360° rotation for optimal viewing angles in portrait or landscape orientation..Detachable VESA Plates: Simplifies installation with removable VESA plates compatible with 75x75mm and 100x100mm mounting patterns..Cable Management: Integrated clip-on cable guides keep your workspace tidy and organized..Heavy-Duty Base: Counter-balanced base provides stability and easy repositioning around the desktop..User-Friendly Adjustment Knobs: Quick and easy horizontal and vertical monitor positioning for maximum viewing comfort..Premium side-by-side dual monitor desk stand conserves valuable desk space, Fits 13" to 27" monitor, Max Load 17.6 lbs., VESA 75x75mm or 100x100mm, Cable Management, Flexible Adjustment

Elevate your workspace effortlessly with our versatile desk converter, designed to seamlessly transition your traditional desk into a dynamic sit-stand workstation. Its compact base maximizes your available space, while the generously sized keyboard tray ensures comfort for extended typing sessions. Accommodating two screens up to 32 in and weighing up to 22 lbs. each, the included monitor mount offers flexibility and adaptability to your setup and is compatible with VESA 75x75 and 100x100. Thanks to gas spring lift technology, adjusting your position is swift and comfortable. Experience ergonomic typing supported by a soft gel wrist pad, while the integrated cable management system keeps your cords organized and your workspace clutter-free. With a height range from 5.7" to 17.1", this converter transforms your desk into a hub of productivity and wellness..Transform your conventional desk into a productive sit-stand workstation with ease.Maximize space with its compact footprint, while the spacious keyboard tray comfortably fits your keyboard and mouse.The included monitor mount supports two screens up to 32" and 22lbs each.Enjoy quick and comfortable position adjustments thanks to gas spring lift technology.Experience ergonomic typing with the soft gel wrist pad and keep cords tidy with the integrated cable management system.This monitor mount supports screens up to 32" and holds up to 22 lbs. per screen..VESA compatible mount: 75 x 75 and 100 x 100.Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.MI-7914 provides you a easy, quick, affordable way to switch position from sit to stand which keeps you from sitting too long while working and allows you to work in an ergonomic standing position.

Add movement to your working day by converting your traditional desk or table into a dynamic sit-stand desk instantly with this Mount-It! extra-wide sit-stand desk converter. Alternating your position between sitting and standing throughout the day can help you work healthier and increase productivity. The extra-large 48" x 23" top platform is suitable to hold two screens side by side, and with the included dual-monitor mount you can position your screens at your preferred height and angle. Thanks to its gas spring technology, this standing desk converter can be easily adjusted to your preferred height between 6" and 19.25" by holding down the lever. Rubber foot pads prevent skids and scratches..Turn your traditional desk into an active multiscreen sit-stand workstation with this standing desk converter.The gas spring lift mechanism allows you to raise and lower to any height between 5.9" and 19.3" effortlessly in just seconds.Large, extra wide 47" x 23" platform with built-in device channel to securely hold your tablet or smartphone.Includes a dual monitor mount for screen sizes from 13" to 27".The desk converter supports up to 33 lbs. of evenly distributed weight, and each monitor arm supports up to 22 lbs. per screen..The design meets or exceeds ANSI/BIFMA standards for durability, stability, and safety..The monitor arm is constructed from durable steel for long-term reliability and support..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by manufacturer's limited lifetime warranty.Turn Any Desk into an Ergonomic Dual-Monitor Sit-Stand PowerStation!

This incredibly versatile product supports up to two 24" monitors each with a maximum individual weight of 26.5 lbs. Not only will this strong and sturdy mount have no trouble holding VESA certified 75x75 or 100x100 monitors, (fitting the above criteria), it is also extremely adjustable! Each monitor can be placed at a different height to accommodate different sized monitors Both monitors have 360a degrees rotation (meaning landscape, portrait, or anything in-between)..Compatibility: 2 x LCD Monitor.Country of Origin: Taiwan.Device Supported: Flat Panel Display.Made of aluminum.Weighs 6.79lbs..Dimensions: 14.47"H x 28.15"W x 5.67"D.Compatible with: VESA 100 x 100, 75 x 75 mounting patterns.Comes in black.3-year manufacturer limited warranty

This incredibly versatile product supports up to two 24" monitors each with a maximum individual weight of 26.5 lbs. Not only will this strong and sturdy mount have no trouble holding VESA certified 75x75 or 100x100 monitors, (fitting the above criteria), it is also extremely adjustable! Each monitor can be placed at a different height to accommodate different sized monitors. Both monitors have 360 degrees rotation. Also included is a +/- 20 degrees tilt in any direction. Individual adjustments for BOTH Monitors, ensuring maximum user comfort. Height adjustable, with a maximum height of 13" from the desk to the center of the mounting device. Studies show that dual monitors can increase productivity by up to 50%..Country of Origin: Taiwan.Device Supported: Flat Panel Display.Maximum Load Capacity: 53 lb..Screwed onto the edge of a desk for maximum space.Clamp bases require a lip on the desk 8-50 mm thick and 85 mm deep.Sturdiest of all Mount types (Stand, Grommet, Clamp) and requires least amount of deskspace

The Tripp Lite dual vertical monitor stand is designed to mount two flat-panel displays above the desk, table or workstation's surface to free up the space. You can customize the display's viewing by just one-touch adjustment and is suitable for 15 - 27" front-panel displays. This stand can swivel up to 20 deg, tilt from -20 to 20 deg and rotates 360 deg for convenient viewing. The stand with 20 lbs. capacity, is perfect for home and office use..Dual vertical flat-screen desk stand/clamp mount.Scratch-resistant powder-coated finish blends with any decor.Dimension: 23"H x 17"W x 11"D.-20/+20 Tilt; 360 rotate, 20 swivel.Conforms to VESA-compliant universal mounting hole patterns.One-touch adjustment for easy viewing from multiple angles.Supports displays up to 20 lb. each.Dual mounting plates adjust independently for angle and height.Ideal for home and office use.Compatible with most desks, tables and workstations.Full 360 deg rotation in both portrait and landscape orientations.Comes with 5 year warranty.Dual vertical flat-screen desk stand/clamp mount, 15" to 27" flat-screen displays.

Organize your computer setup with this Staples TECH dual-monitor adjustable stand. Two independent platforms offer space for a laptop and monitor, and a small angled shelf keeps your smartphone or tablet screen visible while you work. Each platform can be raised or lowered for your viewing comfort. With an open design, this Staples TECH dual-monitor adjustable stand provides convenient storage underneath for reams of paper or a desk supply organizer..Raise your monitor to a comfortable viewing height with this dual-monitor stand.Supports up to 24" monitors for versatile use.Each stand can support up to 20 lbs..Made of steel for durability.Classic black finish adds to its overall aesthetic appeal.Shelf height is adjustable from 6.2" to 8.6".Shelf width is adjustable from 25.6" to 33.1".Dimensions: 8.5"H x 33.5"W x 12.7"D.Customize your desk setup with this Staples TECH dual-monitor adjustable stand.