Electronic Equipment Rack

The SRWF12U38 SmartRack 12U Low-Profile Vertical-Mount Server-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices, two-post racks and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 400 pounds. Because the low-profile cabinet mounts vertically, it extends only 16 inches from the wall while housing equipment up to 35 inches deep, including 1U servers, UPS systems, battery packs and switches. In addition to 8U of rack space in the primary mounting area, it also includes a 4U mounting space at the top of the enclosure for patch panels. The top cover and front panel are removable to allow expedient access to equipment. The cover also locks securely with the included keys to help prevent damage, tampering or theft. The vented cabinet allows air to flow freely and keep equipment cool. Convenient top, bottom and side ports allow easy cable routing. The SRWF12U38's modular design allows you to disassemble the cabinet in minutes for wall-mounting with user-supplied hardware. Mounting holes are spaced 16 inches apart to accommodate standard wall studs. Equipment installation is easy with threaded mounting holes that support 12-24 mounting in two-post racks. Features Saves Valuable Workspace Recommended for areas with limited floor space where you need equipment to be secure, organized and out of the way. Houses EIA-standard 19 in. rack equipment in 8U of space. Also includes 4U of mounting space at the top of the enclosure for patch panels. Extends only 16 in. from the wall while housing equipment up to 35 in. deep. Maximum load capacity of 400 lb. Keeps Important Equipment Secure Top cover locks securely to help prevent damage, tampering or theft. Vented cabinet keeps equipment cool. Convenient ports with removable covers allow cable routing through top, bottom and sides Easy Enclosure and Equipment Installation Modular design for easy disassembly and assembly. Wall-mounting holes spaced 16 in. apart for standard wall stud placement. Threaded mounting holes support 12-24 mounting in 2-post racks. Rack spaces marked for easy reference Meets Payment Card Industry Standards Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance.Maximum load capacity of 400 lb..Locking steel cabinet vented to keep equipment cool.Secures 8U of 19 in. rack equipment up to 35 in. deep.Includes additional 4U of space for patch panels.Modular design for easy disassembly and assembly

The StarTech.com® RK619WALLV 6U black vertical wall-mount server rack is a suitable mounting solution for virtually any surface such as wall, ceiling or desk. It is perfect for LAN switch, patch panel and A/V equipment. It has solid steel construction. This server rack measuring 5.9" x 19.8" x 7.6", offers trouble-free setup with wall-mount installation. It compliments standard construction framework. It includes 16 M5 cage nuts, 16 M5 screws with washers, six wood screws and instruction manual..Wall mount server rack is suitable for LAN switch, patch panel and A/V equipment.Dimensions: 5.9"H x 19.8"W x 7.6"D (external).Color: Black, Material: Solid steel material for durability.Form factor: Rack mountable, Rack height: 6U.Save space in your office or server room by mounting IT or AV equipment vertically to a wall or horizontally under a desk or work bench.6U bracket separate mounting patterns for both ceilings and walls.Features hassle-free setup with wall-mount installation holes spaced 16" apart and matching standard construction framework.Contains 16 x M5 cage nuts, 16 x M5 screws with washers, six wood screws and a instruction manual.RoHS Compliant.Weight: 44.8 oz..Comes with lifetime warranty

Product Type: Open frame rack (2 post).Package Content: 20 x M5 screw, 4 rubber feet, 8 x screws, right bracket, left bracket, left vertical rail, right vertical rail, front base bracket, 20 x M5 cage nuts.Height (Rack Units): 8U.Manufacturer Warr

Use this wall-mount network cabinet to mount your server or networking equipment to the wall, with a hinged enclosure for easy access. This 26U server or network rack cabinet lets you mount your EIA-310 compliant equipment to the wall, in a secure enclosure that has a hinged rear door for easy access to your equipment. The enclosure features adjustable mounting depth from 3 to 20 in. to provide a robust storage solution for your rack-mount equipment. To provide secure stability for your heaviest equipment, this rack offers 4-post mounting, supporting a higher weight capacity per U than 2-post racks and supporting a total load capacity of up to 200 lb. (90 kg)..Save space by wall-mounting your servers or networking equipment.Hassle-free access with a hinged cabinet.Supporting a total load capacity of up to 200 lb. (90 kg).

4-Post 8U Mobile Open Frame Server Rack, 19in Network Rack with Casters, Small Rolling Rack for Computer/AV/Data/IT Equipment.4-Post 8U open frame server rack for data / IT equipment; adjust. mounting depth 22-40in (56-101cm).19" Mobile network rack w/ assembly instructions; Flat pack shipping/packaging to avoid damage and facilitate installations; 18in (46cm) of height: 1200lb (544kg) capacity.Small open frame rack 3 install options: casters, levelling feet, or base-plate to secure to the floor.Rolling computer rack includes cage nuts/screws, cable management hooks and assembly tools.EIA/ECA-310-E Compliant.Computer Equipment Rack | 22" to 40" Adjustable Mounting Depth | Casters | Leveling Feet | Cable Management Hooks

The open rack features an adjustable depth ranging from 12-20 inches to accommodate larger data, network, and telecommunications devices. With a maximum depth of 20 inches, this rack allows for mounting of shelves and other accessories with enough clearance at the back for cable management. The open-frame design help to keep your equipment cool and easily accessible from different angles. The wall mounting holes are positioned 12 and 16 inches apart (center to center) providing a convenient and effecting anchoring, making it suitable for mounting on virtually any wall surface or construction framework. This 24U rack includes M6 square cage nuts and M6 screws to save you the hassle of sourcing separate mounting hardware for your equipment. This rack can be mounted to the wall in a server room, data closet, or office expanding your valuable floor space..2-Post 24U open frame network rack with 12-20in (30.5-50.8cm) adjustable depth for AV, IT computer, switches, patch panels, and PDUs.Durable 19" data server rack features vertical rails made of 2.0mm SPCC cold-rolled steel; Unobstructed airflow to help keep your equipment cool.Efficient flat pack shipping and hassle-free installation; Easy install with access to all sides.M6 square cage nuts, M6 screws and plastic washers included.EIA/ECA-310 compliant.Weight capacity 200lbs/90kg.Mount The RACK-24U-20-WALL-OA 24U Open Frame Wall Mount Equipment Rack with Adjustable Depth is a high-quality, sturdy relay rack solution that is easy to assemble and install into any environment.

Innovation® First 1U rack mount rails have support flange which is 23 1/2" long is used for supporting the equipment kept in the rack. Rails support both center and flush mount installations and Velcro straps provided for securing cables..Compatibility: Servers, storage, computers.Material: 0.049" steel with a durable zinc plating.Support both center and flush mount installations.Rack rails support flange is 23 1/2" (597mm) long.Rack rails minimum equipment width: 6 1/4".Maximum equipment width: 17 5/8".Equipment mounting: Rack rails standard thumb screw threads (10-32, 12-24, and metric m6), compatible with APC, CPI, chatsworth, bud and most other racks.Velcro straps provided for securing cables.Mounting depth range is 0" to 18" deep.Includes 1u rack mount rails, cabling crossbar, relay racks, screws, cage-nuts, nuts.Certifications and standards: EIA-310.Innovation® First 1U rack mount rails allows racking of equipment that was never designed to be rack mounted and is compatible for servers, computers.

The Tripp Lite SRW6UKD SmartRack 6U wall mount rack enclosure server cabinet knockdown has a heavy-duty steel construction with a durable black powder-coated finish. This cabinet has a maximum load capacity of 200 lbs. The cabinet knockdown is suitable for housing EIA-standard 19" rack equipment in network wiring closets, retail locations, classrooms and back offices..Wall mount rack enclosure cabinet knock down with doors & sides is designed to house EIA-standard 19" rack equipment in retail locations, classrooms.Dimensions: 14.5"H x 23.6"W x 17.9"D.Color: Black, finish: Powder coat, material: Steel.Application/usage: LAN switch, patch panel.Max weight capacity: 200 lbs., static/stationary weight capacity: 200 lbs..Rack height: 6U, rack width: 19", rack depth: 16.5".Form factor: Wall mountable.Includes SmartRack SRW6UKD rack cabinet, owner's manual, assembly hardware, 2 x top/bottom panels, 2 x side, 12 x 12-24 screws, 12 x M6 cage nuts.RoHS compliant

The SRWF6U36 SmartRack 6U Low-Profile Vertical-Mount Server-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 150 pounds. Because the low-profile cabinet mounts vertically, it extends less than 12 inches from the wall while housing equipment up to 36 inches deep, including 1U servers, UPS systems, battery packs and switches. In addition to 6U of rack space in the primary mounting area, it also includes a slide-out 2U mounting bracket at the top of the enclosure for patch panels up to 2.5 inches deep. The top panel and front door lock securely to help prevent damage, tampering or theft. The cabinet is vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right. Convenient top and bottom ports allow easy cable routing. The SRWF6U36 comes fully assembled and ready to mount to the wall. Equipment installation is easy with threaded mounting holes and hardware that support M6 or 12-24 mounting..Includes additional 2U of space for patch panels.Locking steel cabinet vented to keep equipment cool.Maximum load capacity of 150 lb..Secures 6U of 19 in. rack equipment up to 36 in. deep.Ships fully assembled for quick installation

This 9U server or network rack cabinet lets you mount your EIA-310 compliant equipment to the wall, in a secure enclosure. The enclosure features adjustable mounting depth from 3 to 20.8 in. to provide a robust storage solution for your rack-mount equipment. To provide secure stability for your heaviest equipment, this rack offers 4-post mounting, supporting a higher weight capacity per U than 2-post racks and supporting a total load capacity of up to 200 lb. (90 kg). Save space in your office or server room Save valuable floor space, by wall-mounting the enclosure. The wall-mounted design makes this enclosure the ideal solution for optimizing equipment storage in your classroom, retail store, server room or office. This rack also includes a 1U shelf that gives you a stable surface for storing your tools placing equipment that's not rack-mountable..Save space by wall-mounting your servers or networking equipment.Easily install your equipment with mounting hardware included.Secure your mission-critical equipment with a locked enclosure

Tripp Lite Wall mount rack enclosure cabinet is featured with hinged cabinet for easy equipment access. Wall mount rack is featured with depth of 33" to accommodate most 1U servers and provides extra clearance for cable management..Capacity: 113.4 Kg.Dimensions: 25"(H) x 23.6"(W) x 33 1/2"(D).Black.Rack: 12U, 19" rack width.Adjustable mounting depths from 3" to 33" - accommodates most 1U servers and simplifies cable management.Ventilated front door and side panels for increased airflow.Hinged cabinet swings away from wall bracket for easy equipment and cable access.Heavy duty construction to handle added leverage, locking, reversible front door, locking, removable side panels, top and bottom panel cable access openings.Fully assembled for quick installation.Includes SRW12US33 wallmount rack enclosure, (36) M6 screws, (36) M6 cage nuts, (36) M6 washers, (2) keys, owner's manual.Certifications: EIA-310-D, IEC 60297-3-100, DIN 41494, IP250 protection rating, RoHS.Weight: 100 lbs..Warranty: 5 years limited.Tripp Lite Wall mount rack enclosure cabinet has heavy duty construction to support added leverage and is fully assembled for quick installation.

The Tripp Lite SmartRack low-profile switch-depth rack enclosure cabinet with 200 lbs. load capacity, stores and organizes 6U of 19" rack equipment up to 16 1/2" deep in locations with limited floor space. This cabinet has clear acrylic window that lets you monitor equipment without unlocking the door. Vented panels promote ample airflow that keeps equipment cool. Cabinet has convenient ports with removable covers to facilitate cable routing through top and bottom. It is suitable for use in network closets, retail outlets, warehouses, offices, classrooms and other locations. This wall mountable cabinet avoids equipment tampering and minimizes acoustic noise..Has steel construction for durability.Form factor: Wall mountable, rack mountable.Comes in black color.Dimensions: 14 1/2"(H) x 23 1/2"(W) x 17 1/2"(D), 6U(H) x 16 1/2"(D) rack.Device depth: 7.62 cm - 41.9 cm.Maximum load capacity: 200 lbs..Grounding lug: Front and back door frames.Front door has shatter-resistant clear acrylic window and locking steel cabinet with sides, top as well as bottom ventilation.Ideal for network wiring closets, retail locations, classrooms and back offices space.Allows you to monitor equipment without unlocking the enclosure and prevents equipment tampering.Front door and side panels lock securely to prevent damage, tampering or theft and vented panels let generous airflow that keeps equipment cool.Rotate cabinet 180 deg before mounting to open reversible front door left or right & convenient ports allow cable routing through top/bottom.Has rails that support square-hole or threaded-hole mounting and rack spaces come numbered for easy reference.Includes M6 screws, M6 cage nuts, M6 cup washers, 12-24 screws, removable mounting plate, mounting plate screws, keys and owner's manual.Meets UL/CSA 60950-1, EIA-310-E, Tested to NOM and RoHS certifications or standards.Weight: 13 kg.Comes with 5 years limited warranty

The Vertiv VR Rack VR3300 is a 42U server rack built with reliable engineering and is designed for simple and easy configuration. It has dimensions of 2000mm x 600mm x 1200mm (height, width, and depth), and has a deep frame that provides users around 2.5 inches more useable depth than similar sized racks. It has load capacities of 3,000 pounds static and 2,500 pounds dynamic. It is delivered ready for high density environments and supports a wide variety of equipment, including: servers, storage, PDUs, UPSs, console servers, and KVM switches. The zero U spaces in the Vertiv VR Rack have brackets and mounting holes for tool-less installation and removal of rack PDUs and cable management accessories. Each rack also comes with two sets of 19-inch EIA rails for sliding shelves, and the rack has split side panels with single locking slam latch that allows for easy single person installation and removal..BUILT-TO-LAST ENGINEERING: This 42U rack is designed for rapid deployment even in high density environments with load capacities of 3,000 pounds static and 2,500 pounds dynamic.FULLY CONFIGURABLE: Tool-less installation and removal of accessories and additional shelves allow you to modify this rack cabinet to suit the ever-changing needs of your network..2.5 INCHES MORE USABLE DEPTH: The Vertiv™ VR Rack is designed to provide you around 2.5 inches more useable depth than any standard 19-inch rack cabinet..DIMENSIONS: This server enclosure has dimensions of 2000mm x 600mm x 1200mm (height, width, and depth).SUPPORTS WIDE VARIETY OF EQUIPMENT: This 42U server rack supports rack-based equipment including: servers, storage, PDUs, UPSs, console servers, and KVM switches.

N/A. This rack-mount PDU features eight C13 outlets and you can install it into 1U of rack space to power your rack-mount equipment. The PDU provides 16 amps of power to be shared across the eight outlets.Sleek, professional installationUnlike some rack power solutions that mount awkwardly, if at all, this rack-mount PDU is EIA-310D compliant, which ensures a secure and tidy installation into any 19" rack with 1U of available space. Mounting screws and cage nuts are also included to ensure you have everything you need, saving you time and hassle.Flexible power solutionFor maximum compatibility with your devices, this PDU features C13 outlets which are ideal for a wide range of globally distributed devices including I.T equipment, office equipment, measuring instruments and medical devices. Plus, with a total of eight C13 outlets, the PDU can distribute power to your entire rack.Protects your equipmentIn the event of random energy surges that can occur during power outages or other anomalies, this PDU prevents costly damages to your equipment with a built-in dual circuit breaker, ensuring your equipment is protected.The housing of this PDU is also constructed of rugged steel to provide maximum durability in any environment.The PDU08C13H is backed by a StarTech.com 2-year warranty and free lifetime technical support..Ensure hassle-free installation with a 1U EIA-310D compliant PDU.Get wide device compatibility with a PDU that features C13 outlets.10 ft. (3 m) C19 to NEMA5-20p power cord included.Protect your equipment with the dual circuit breaker that's built into this PDU.Solid steel chassis for durability.1U rack-mount design

The Tripp Lite SRW12US33G SmartRack 12U wall-mount rack enclosure cabinet in black, is perfect for network closets, retail locations, classrooms and other areas with limited floor space where you need equipment to be secure or ganized and out of the way. This cabinet measuring 25" x 23.63" x 33.5", has durable steel/acrylic construction for longer endurance. Cabinet with 250 lbs weight capacity, has extra-deep capacity to accommodate most 1U servers, UPS systems, battery packs and switches. This cabinet swings away from the wall to offer easy access to equipment and cabling during installation/maintenance. It comes with two keys, 36 M6 screws, 36 M6 cage nuts, 36 M6 washers and 36 12-24 screws for added convenience..Wall-mount rack enclosure cabinet featuring high-quality constructions, withstands harsh environments.Dimensions: 25" x 23.63" x 33.5".Color: Black, Material: Steel, acrylic.Maximum weight capacity: 250 lbs..Static/stationary weight capacity: 250 lbs..Rack height: 12U.Grounding lug: Front and back door frames.Perfect for network closets, retail locations, classrooms and other areas with limited floor space where you need equipment to be secure or ganized.Swings away from the wall to allow easy access to equipment and cabling during installation and maintenance.Allows you monitor equipment without unlocking the enclosure while preventing equipment tampering and reducing acoustic noise.Vented panels allow generous airflow that keeps equipment cool while convenient ports with removable covers allow cable routing.Vertical mounting rails adjust in 0.875" increments to house equipment up to 32.5" deep while wall-mounting holes spaced 16" apart.Rails support square-hole or threaded-hole mounting while rack spaces numbered for easy reference.Meets EIA-310-D, IEC 60297-3-100, IP250, RoHS certifications and standards.Contains SRW12US33G SmartRack 12U server-depth wall-mount rack enclosure cabinet, 36 x M6 screws, 36 x M6 cage nuts, 36 x M6 washers.Weight: 94.5 lbs..Comes with 5 years limited warranty

Tripp Lite 18U extra depth rack enclosure cabinet is compatible with all standard 19" rack equipment. Cabinet has top and bottom panels which are furnished with vents that remove warm air from enclosure and draw in cool air by convection..18U with adjustable front and rear vertical rackmount rails.Extended depth of 33" allow for standard server installation.Dynamic/rolling weight capacity: 500 lbs., static/stationary weight capacity: 500.00 lbs..Dimensions: 35.6"(H) x 23.6"(W) x 33 1/2"(D).Rack height: 18U, rack width: 19".Locking, reversible front door and locking, removable side panels, fully assembled for quick installation, casters and leveling feet.Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) compliance.Front rail.Package contents: SmartRack 18U extra depth rack enclosure cabinet, 42 x M6 screws, 42 x M6 cage nuts, 42 x M6 washers, 4 x casters, 4 x levelers, 2 x keys, owner's manual.Certification and standards: RoHS, green compliant.Weight: 105 lbs..Warranty: 5 years limited.Tripp Lite 18U extra depth rack enclosure cabinet supports of up to 500 lbs of equipment with included installation hardware and features front and rear pairs of vertical rails with square mounting holes.

The Lantronix® SLC 8000 console manager is an 32-port RJ45, 2-AC supply 1U rack mountable console manager which provides easy, secure administration and management of IT equipment from anywhere and at any time. The SLC 8000 enables you to leverage the command line interface of most IT equipment for rebooting, reconfiguring and reloading firmware from a single point of contact with help of dual Gigabit Ethernet connections for both public and management networks..Advanced console rack server delivers the latest performance and expandability.1 GHz processor.Dimensions: 1.8"H x 17.3"W x 12"D.2 x network (RJ-45), 2 x USB, 32 x serial, management port, gigabit Ethernet technology.Power supply: 120 VAC, 230 VAC, 50 - 60 Hz, consumption: 30 W.Meets FCC Part 15, CE (EN55022, EN55024, EN60950), CSA, VCCI, UL/CUL, C-Tick, CB Scheme standards.Supported flash memory: SD, SDHC.Features modular design, integrated security, centrally monitor, manage and troubleshoot.Includes console manager, 2 x inlet AC power cords, RJ-45 to DB9F adapter, RJ-45 to RJ-45, cat5 cable 6.6', RJ4 loopback cable.Data transfer rate: 1 Gbps.256KB packet buffer, firewall protection, LDAP support, manageable, management information base (MIB), packet filtering, VPN support.Nominal voltage: 120/230 VAC, Frequency required: 50 - 60 Hz, Power consumption: 30 W.Supported flash memory cards: SD Memory Card, SDHC Memory Card.Authentication method: Active Directory, CHAP, Kerberos, LDAP, PAP, SSH, Secure Shell v.2 (SSH2), TACACS+, Encryption algorithm: AES, SSL 3.0, TLS 1.0.Meets C-Tick, CB, CSA, cUL, EN 60950, EN55022, EN55024, FCC Part 15, FIPS 140-2, FIPS 197, NIST, UL, VCCI standards.Provides security for secure data access.Silver.Lantronix® SLC 8000 Advanced dual AC console manager server in modular design has 32 ports for enhanced connectivity. Suitable for system administrators and test engineers.

Tripp Lite SmartRack 12U Wall mount rack enclosure cabinet has adjustable front and rear mounting rails that have square as well as tapped holes. Cabinet features heavy duty/high weight capacity side mount construction to hold up to 500 lbs..Dimensions: 26.46"(H) x 36.2"(W) x 24.77"(D).Black.Form factor: Wall mountable.Rack size: 12U(H) x 19"(W) x 32.5"(D).Static/stationary weight capacity: 500 lbs..Adjustable front and rear rails.Heavy-duty/high weight capacity side-mount construction.Fully vented doors and side panel.Dual-rail mounting designs supports equipment mounting via square holes or threaded holes.Multiple mounting positions for optional fans (SRFANWM).Applications: Server.Includes 20 x M6 cage nuts, 20 x M6 equipment mounting screws, 20 x M6 washers, 20 x 12-24 equipment mounting screws, Key set, owner's manual.Certifications and standards: EIA-310-E, RoHS.Weight: 101.4 lbs..Warranty: 5 years limited.Tripp Lite SmartRack 12U Heavy-duty wall mount rack enclosure cabinet in black color has a ventilated front door that provides generous airflow and allows easy access to rack mounted equipment.

This 9U server rack cabinet lets you mount your EIA-310 compliant equipment to the wall. The enclosure features an adjustable mounting depth from 6 to 17 in. and offers a maximum load capacity of 200 lb. (90 kg). Save space in your office or server room Save valuable floor space, by wall-mounting the enclosure. The wall-mounted design makes this enclosure the ideal solution for optimizing equipment storage in your classroom, retail store, server room or office. This rack also includes a 1U shelf that gives you a stable surface for storing your tools or placing equipment that's not rack-mountable..Save space by wall-mounting your servers or networking equipment.Easily install your equipment with adjustable 2-post mounting rails.Secure your mission-critical equipment with a locked enclosure

The U1V is a 1RU, 15.4in deep vented rack mounted shelf designed to hold a variety of components. The rack mounted shelf is made of welded steel construction with a black powder coat finish, ensuring long-lasting durability. The U1V features fully vented bottom and sides to promote heat dissipation, ensuring that your components stay cool even during prolonged use. This rack mounted shelf accepts optional clamping bars to secure components, providing added safety and stability. The U1V also accepts the PD-815SC-PBSH power strip, which provides ample power for your components. It includes 3 rear brackets to prevent components from sliding backward, ensuring that your equipment remains securely in place. If you need a sturdy and reliable vented shelf for your components, the Middle Atlantic U1V is an excellent choice. With its welded steel construction, black powder coat finish, and fully vented bottom and sides, the U1V provides both durability and efficient heat dissipation..This is a 1 RU vented utility rackshelf designed for mounting small, non-rackmount equipment in professional AV, IT, and broadcast rack systems.The U1V is rack-mountable and fits standard 19-inch equipment racks.The package includes the vented shelf and three adjustable brackets to prevent components from sliding backward.Dimensions H 1.75” x W 19” x D 10.78”.Constructed from sturdy 16-gauge steel with a black powder coat finish, the shelf features fully vented bottom and sides for optimal heat dissipation. It also supports optional clamping bars and power strip mounting.Compatible with standard 19-inch racks and supports accessories like the PD-815SC-PBSH power strip and optional clamping bars.Typically backed by Legrand’s 1-Year limited warranty

Vertically mount your server or networking equipment to a wall with this 6U network cabinet - Total load capacity of 198 lb. (90 kg) - Extra 2U of space for switches and patch cables - Vertical Server Cabinet / Wall Mount Server Rack Cabinet / Server Rack / Server Cabinet / Network Rack / Network Cabinet / Wall Mount Server Rack / Wall Mount Network Rack / Wall Mount Data Rack / Wall Mount Equipment Rack / Wall Mount Network Cabinet / Network Enclosure / 6U Wall Mount Rack.Total load capacity of 200 lb. (90.7 kg).Save space by mounting your server vertically to the wall.Extra 2U of space for switches and patch cables.Keep equipment secure with lockable door and access panel.Comes fully assembled with all necessary hardware to install equipment for easy installation.Vertically wall-mount your server or networking equipment in this 6U network cabinet

Mount your server or networking equipment to the wall, using this adjustable 15U open frame rack - Easy installation with mounting points positioned 12 and 16 in. apart to match standard wall studs - Flat-packed for easy and cost-effective shipping - Network rack / server rack / Computer rack / Equipment rack / wall mount network rack / open frame rack / 15U server rack / 15U wall mount rack / wall mounted rack / small server rack.Accommodate a range of device sizes with the adjustable depth and a weight capacity of 198 lbs. (90kg).Fits into smaller spaces and frees up floor space when mounted to the wall.Provides passive cooling for equipment with the open frame wall mount rack design.Easy installation with the standard 12 and 16 inch mounting holes accommodating standard stud spacing.Mount your server or networking equipment to the wall, using this adjustable 15U open frame rack

The Tripp Lite SmartRack low-profile switch-depth rack enclosure cabinet with 200 lbs load capacity, stores and organizes 12U of 19" rack equipment up to 16.5" deep in locations with limited floor space. This cabinet has clear acrylic window that lets you monitor equipment without unlocking the door. Vented panels promote ample airflow that keeps equipment cool. Cabinet has convenient ports with removable covers to facilitate cable routing through top and bottom. It is suitable for use in network closets, retail outlets, warehouses, offices, classrooms and other locations. This wall mountable cabinet avoids equipment tampering and minimizes acoustic noise..Has steel construction for durability.Form factor: Wall mountable.Comes in black powder coat color.Dimensions: 25.1"(H) x 23.6"(W) x 17.7"(D), 12U(H) x 19"(W) x 16.5"(D) rack.Device depth: 7.62 cm - 41.9 cm.Maximum load capacity: 200 lbs..Grounding lug: Front and back door frames.Front door has shatter-resistant clear acrylic window and locking steel cabinet with sides, top as well as bottom ventilation.Ideal for network wiring closets, retail locations, classrooms and back offices space.Allows you to monitor equipment without unlocking the enclosure and prevents equipment tampering.Front door and side panels lock securely to prevent damage, tampering or theft and vented panels let generous airflow that keeps equipment cool.Rotate cabinet 180 deg before mounting to open reversible front door left or right & convenient ports allow cable routing through top/bottom.Has rails that support square-hole or threaded-hole mounting and rack spaces come numbered for easy reference.Includes M6 screws, M6 cage nuts, M6 cup washers, 12-24 screws, removable mounting plate, mounting plate screws, keys and owner's manual.Meets UL/CSA 60950-1, EIA-310-E, Tested to NOM and RoHS certifications or standards.Weight: 22 kg.Comes with 5 years limited warranty

Vertically mount your server or networking equipment to a wall with this 8U network cabinet - Total load capacity of 198 lb. (90 k) - Extra 2U of space for switches and patch cables - Vertical Server Cabinet / Wall Mount Server Rack Cabinet / Server Rack / Network Rack / Wall Mount Rack / Server Case / Network Cabinet / Wall Mount Server Rack / Server Rack Cabinet / Wall Mount Network Rack / Wall Mount Data Rack / Wall Mount Network Cabinet / Network Enclosure / Server Rack Enclosure.Total load capacity of 200 lb. (90.7 kg).Save space by vertically mounting your server to the wall.Extra 2U of space for switches and patch cables.Keep equipment secure with lockable door and access panel.Comes fully assembled with all necessary hardware to install equipment for easy installation.Vertically wall-mount your server or networking equipment in this 8U network cabinet

The Rack Solutions RAL 9003 gives you the ability to mount your Fortinet desktop firewalls in a 19" rack. The rack is tailored specifically for the listed models to guarantee a perfect fit. In addition, the connections are brought to the front for easy access. The power supply is fixed to prevent an accidental loss of power. Assembly will take about 5 minutes. Simply slide your Fortinet device in the kit, place the retainers, connect the supplied cables to the keystones and fix the power supply to the rack..This mount gives you the ability to mount your Fortinet desktop firewalls in a 19" rack.Dimensions: 1.73"H x 18.98"W x 8.54"D.Comes in green signal white color.Supported models: FortiGate 60E, FortiGate 60E-POE, FortiGate 60E-DSL, FortiGate 61E, FortiGate 60F, FortiGate 61F.Includes 11x 0.5m cables, 11x RJ45 couplers.Box contains: FortiRack and RJ45 couplers, cables, assembly materials, installation guide

This 1U rackmount power distribution unit (PDU) provides unfiltered power distribution to 10 NEMA 5-15 receptacles from a UPS system, generator, or utility power source. Designed for electrically demanding IT or industrial environments, the CPS1215RM has durable metal housing and network-grade plugs and outlets. A 15-foot AC power cord allows the PDU to be placed where it's needed and a cord retention tray secures power cords, keeping them organized and accessible. The CPS1215RM Basic PDU also comes with a three-year warranty..Rack Mountable (1U) PDU that delivers AC power to servers, equipment, and connected devices..Input voltage: 120 VAC, 50Hz/60Hz.Power capacity: 1.8 kVA, 15-Amp electrical capacity with circuit breaker.Product Dimensions are 17.25"W x 1.75"H x 4.75"D with a Cord Length of 15 ft (4.5 m)..This PDU has a Nominal Input Voltage of 100 VAC - 125 VAC and uses an input plug type NEMA 5-15P..Output voltage: 120 VAC (60 Hz)Plug/connector type: NEMA 5 15P straight, Receptacles: 10 x NEMA 5 15R (Output).Meets or exceeds UL & RoHS.Provides shielding against electromagnetic interference & radio frequency signals. Most commonly, this is used to prevent line noise or humming that occurs over telephone lines or stereo electronics.Warranty: 3 Year Limited Warranty.Compatibility: PC.Certifications and standards: UL, RoHS.Includes: CPS 1215RM unit, warranty card/manual.Weight: 4.90 lbs..Deliver reliable power to multiple devices with the CPS1215RM Basic PDU from CyberPower, your trusted ally in power.

The Tripp Lite SmartRack black rack enclosure server cabinet features locking, removable, reversible front and rear doors for easy closing/opening. It has textured powder coat finish for added environmental protection. This cabinet comes with preinstalled casters for easy movement and leveling feet for positioning. The built in baying tabs in this cabinet, allow enclosures to combine securely in rows. It works with airflow optimization accessories and cable management accessories..Rack enclosure server cabinet is compatible with airflow optimization accessories as well as cable management accessories.Meets UL60950, RoHS, CE, tested to NOM (Mexico) and EIA/ECA-310-E certifications and standards.Dimensions: 226.06 cm H x 60.02 cm W x 109.22 cm D, Depth: 10.16 cm - 94 cm.Built in baying tabs allow enclosures to be combined securely in rows.Comes in black color.Rack height: 48 U spaces, Weight capacity: 1360.8 Kg (stationary), 1020.6 Kg (rolling), Factory preset rack depth: 70.49 cm.Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws.Tool less accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers.Each rail accommodates two vertical PDUs or cable managers side-by-side (four items per enclosure).Easy-view depth index ensures consistent rail placement without requiring time-consuming measurements.65+ Percent open space in door perforation pattern meets or exceeds server manufacturer requirements.Split rear door design minimizes clearance requirements for service entry allowing the enclosure to place closer to a wall.Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing.Includes smart rack enclosure, four side panels, four side panel locks, two door & side panel keys, 50 x M6 screws, 50 x M6 cage nuts & owner's manual.Weight: 309 lbs..Comes with 5 years limited warranty

Tripp Lite SMARTRACK™ 12U Rack enclosure cabinet is designed to remove warm air from the enclosure and draw in cool air by convection. Cabinet provides safe, secure installation for all equipment with its locking, reversible front door..Style: Floor standing.Dimensions: 33.5"(H) x 25"(W) x 23.6"(D).black.12U (H) x 19"(W) rack.Maximum weight capacity: 63.50 kg.Adjustable mounting depths from 3" to 33" inches.Top and bottom panel cable access openings, preinstalled casters and levelling feet.Locking, reversible front door.Locking, removable side panels.Casters and levelling feet.Includes rack enclosure, (36) m6 screws, (36) m6 cage nuts, (36) m6 washers, sracaster kit, (2) keys, owner's manual.Certifications and standards: EIA-310-E.Weight: 105 lbs..Warranty: 5 years.Tripp Lite SMARTRACK™ 12U Rack enclosure cabinet has adjustable vertical mounting rails which accommodate equipment depths from 3" - 33" and features leveling feet.

Product Type: Rack.Package Content: 42 cage nuts, 42 screws.Color: Black.Rack Size: 19".Height (Rack Units): 18U.Dimensions (WxDxH): 36.1 in x 24.8 in x 35.9 in.Weight: 119.93 lbs.Features: Wall mountable, removable side panel, integrated cable m

The Tripp Lite SRW15US SmartRack 15U Low Profile Switch Depth Wallmount Rack Enclosure Cabinet is designed to house EIA-standard 19 in. rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 lbs. The cabinet swings away from the wall on a sturdy hinge, allowing easy backdoor access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW15US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack..Ideal for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space.Secures 15U of 19 in. rack equipment up to 20.5 in. deep.Maximum load capacity of 200 lbs..Swings away from wall on hinge for easy, backdoor access to equipment and cabling during installation and maintenance.Cabinet should be rotated 180° before mounting to open reversible doors left or right.Locking steel cabinet vented at sides, front, top and bottom.Flow-through ventilation keeps equipment cool.Convenient ports with removable covers allow cable routing through top and bottom.Wall-mounting holes spaced 16 in. apart for standard wall stud placement.Vertical mounting rails adjust in 7/8 in. increments to accommodate equipment up to 20.5 in. deep, such as network switches and patch panels.Rails support square hole or 12-24 threaded-hole mounting.Rack spaces numbered for easy reference.Can be converted to a roll rack with optional SRCASTER (sold separately).Meets Payment Card Industry Standards.Ships fully assembled.5-year limited warranty.Includes 20 M6 screws, 20 M6 cage nuts, 20 M6 washers, 20 12-24 screws and 2 keys

The Tripp Lite SRW15USG SmartRack wall mount 15U rack enclosure cabinet in black, is ideal for LAN switch/patch panel. It has a steel body and an acrylic window. The rack enclosure prevents equipment tampering, it minimizes acoustic noise and provides extra visual flair. The vented panels allow generous airflow to keep the equipment cool. It has an option to rotate cabinet 180 deg before mounting to open reversible front door left or right. The wall mounting holes spaced 16" apart accommodate standard wall stud placement and rails adjust easily to unscrew, slide them to the desired depth. It secures and organizes 19" rack equipment in network closets, classrooms..Low-profile switch-depth wall-mount rack enclosure cabinet is perfect for LAN switch, patch panel.Dimensions: 30.33"H x 23.62"W x 21.6"D.Comes in black color with acrylic window, steel construction.Weight capacity: 200 lbs. (stationary).Form factor: Wall mountable, rack height: 15U.Perfect for network closets, retail locations, classrooms and other areas with limited floor space where you need equipment to be secure, organized.Swings away from the wall to allow easy access to equipment & cabling during installation & maintenance, rotate cabinet 180 degrees before mounting.Prevents equipment tampering, reduces acoustic noise, provides extra visual flair.Side panels and front door lock securely, vented panels allow generous airflow that keeps equipment cool.Convenient ports with removable covers allow cable routing through top and bottom.Wall-mounting holes spaced 16" part to accommodate standard wall stud placement, rails adjust easily - unscrew them, slide them to desired depth.Rails support square-hole or threaded-hole mounting, rack spaces numbered for easy reference.Includes rack enclosure cabinet, 20 x M6 screws, 20 x M6 cage nuts, 20 x M6 washers, 20 x 12 - 24 screws, 2 x keys, owner's manual.Meets UL/CSA 60950-1, EIA-310-D, IEC 60297-3-100, IP20 Protection, RoHS standards.Weight: 88.2 lbs.

The Tripp Lite® SR42UBDP SmartRack 42U deep rack enclosure server cabinet in black, is 48" deep that allows for high density equipment installations. It has textured powder coat finish for tough resistance to environmental conditions. Server cabinet withstands 3000 lbs stationary load and 2250 lbs dynamic load. The front door of this cabinet is lockable, reversible and removable. This cabinet has numbered rack space for easy reference. It has removable front and rear doors with quick-release ground wires..Rack enclosure server cabinet features locking, removable, reversible front and rear doors.Dimensions: 78.5"H x 24"W x 47.3"D, Rack height: 42U.Color: Black.Capacity: 3000 lbs. (Stationary), 2250 lbs. (Dynamic).Front and rear sets of equipment mounting rails adjust in 0.25" increments.Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers.Massive front to rear ventilation capacity.Compact design allows the enclosure to roll through standard height commercial doorways.Leveling feet extend to allow enclosure to be positioned on uneven floors, levelers are removable.Components are grounded to the enclosure frame which includes multiple connections for facility ground.Includes doors, four side panels, four side panel locks, 50 x M6 screws, 50 x M6 cage nuts, 50 x M6 washers.Meets UL60950, RoHS, CE certifications and standards.Comes with 5 years limited warranty

The Tripp Lite SmartRack black low-profile wall-mount rack enclosure cabinet measuring 35.6" x 23.62" x 21.6", protects and organizes 18U of 19" rack equipment in network closets, classrooms and other locations with limited floor space. This cabinet with hinged back, features steel construction for durability. The clear acrylic window of the cabinet keeps the equipment clearly visible. It has 250 lbs. of holding capacity. The hinged back wings away from the wall to allow easy access to equipment. It has rails that support square-hole or threaded-hole mounting..Steel construction for added durability.Dimensions: 35.6"H x 23.62"W x 21.6"D.Form factor: Wall mountable

The Tripp Lite SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW12U comes fully assembled and ready to mount to the wall, or use Tripp Lite's optional SRCASTER rolling caster kit to make it a mobile rack..Secures 12U of 19" rack equipment up to 16.5 in. deep.Maximum weight capacity of 200 lbs..Wall Mountable.Ventilated front door and side panels for increased airflow.Front door is lockable and reversible.Side panels are lockable and removable.Rack unit 12U; Rack size 3" - 16 1 2".Certifications EIA-310-E, Tested to NOM (Mexico), RoHs.2-Year Limited Warranty.Warranty 2 years limited.Tripp Lite SRW12U Wall-Mount Rack Enclosure Cabinet comes with ventilated front door and a side panel that allows generous airflow to keep the equipment operates safely.

The Tripp Lite SR24UBFFD SmartRack 24U standard-depth rack enclosure cabinet is perfect for factories, power stations, water treatment plants, construction areas, shipping facilities, warehouses, transport hubs and other working environments high in moisture, dust and debris. Cabinet measuring 46.8" x 23.6" x 38.5", has durable steel construction for longer endurance. It has eight high-performance fans built into front door for ensuring maximum airflow through enclosure. Cabinet with 1000 lbs weight capacity, accommodates standard 19" rack equipment in 24U of space. It has louvered front door for blocking drips, splashes and falling debris from entering enclosure, while the built-in dust filters keep out airborne contaminants away..Rack enclosure cabinet featuring high-quality constructions, withstands harsh environments.Dimensions: 46.8" x 23.6" x 38.5", Cord length: 6'.Color: Black, Material: Steel.Maximum weight capacity: 1000 lbs..Static/stationary weight capacity: 1000 lbs..Rack height: 24U.Grounding lug: Front and back door frames.Input voltage: 120 V, 50/60 Hz, Input plug type: NEMA 5-15P.Perfect for factories, power stations, water treatment plants, construction areas, shipping facilities, warehouses and transport hubs.The 8 high-performance fans built into front door pull air through enclosure/cool equipment while built-in dust filters keep out airborne contaminants.Filters can be removed as well replaced with standard 20" x 24" x 1" furnace filters and fans powered by detachable 10' AC cord with NEMA 5-15P plug.Reversible doors and removable side panels lock tight while convenient ports with removable covers allow cable routing through top and bottom.Front as well rear mounting rails accommodate equipment from 3" - 32.5" deep while rails support square-hole mounting.Removable casters and levelers help with minor position adjustments as well stabilization and comes with mounting hardware.Meets EIA-310-E, IEC 60297-3-100, IP54, RoHS certifications and standards.Contains SR24UBFFD SmartRack 24U standard-depth rack enclosure cabinet, 50 x M6 cage nuts, 50 x M6 screws, 50 x cup washers, four casters.Weight: 209.43 lbs..Comes with 2 years limited warranty

The Tripp Lite SRW9UDP SmartRack 9U wall-mount low-profile switch-depth-plus rack enclosure cabinet in black, houses EIA-standard 19" rack equipment. This cabinet is suitable for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space. The side panels and front door lock prevents damage, tampering or theft and the reversible front door can open left or right by rotating the cabinet 180-deg before mounting. This cabinet made of steel with durable black powder-coated finish has a maximum load capacity of 200 pounds. The cabinet with top and bottom ports allows easy cable routing..Wall mount rack enclosure cabinet is perfect for network wiring closets, retail locations, classrooms, back offices & other areas.Dimensions: 50.37 cm H x 59.99 cm W x 55.14 cm D.Heavy-duty steel construction with a durable black powder-coated finish.Compatible with Server.9U rack height, weight capacity: 90.7 kg (stationary).Device depth: 7.62 - 52.07 cm.Grounding lug: Front and back door frames.Side panels and front door lock securely to help prevent damage, tampering or theft, vented panels allow generous airflow that keeps equipment cool.Rotate cabinet 180 deg before mounting to open reversible front door left or right.Convenient ports with removable covers allow cable routing through top and bottom.Mounts to wall or rolls on floor with Tripp Lite’s optional SRCASTER caster kit.Wall-mounting holes spaced 16" apart for standard wall stud placement.Vertical mounting rails adjust in 7/8" increments to accommodate equipment up to 20 1/2" deep, such as network switches and patch panels.Rails adjust easily - unscrew them, slide them to desired depth and screw them back in.Rails support square-hole or threaded-hole mounting, rack spaces numbered for easy reference.Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance.Includes 18 x M6 screws, 18 x M6 cage nuts, 18 x M6 cup washers, 18 x 18-24 screws, removable mounting plate, 3 x mounting plate screws.Meets EIA-310-E, Green compliant, RoHS standards.Weight: 23.5 kg.Comes with 5 years limited warranty

This adjustable rackmount shelving system supports 1U UPS systems as well as other 1U pieces of networking or power protection equipment. It offers a 4-post expandable mounting rails in the front to rear support for equipment with 17 1/2-inch wide rectangular chassis..Dimensions 1.72"(H) x 1.49"(W) x 20 1 2"(L).Weight capacity Up to 150 lbs..Silver.Maximum adjustable depth 36".Adjustable to any length between 20 1 2" and 36".Square hole rack attachment hardware included.Includes left rail pieces - a front and a rear, right rail pieces - a front and a rear, 10 - M6 screws, 10 - M6 washers, installation guide.Warranty 5 years limited.Tripp Lite SmartRack™ 4POSTRAILKit1U Rack Mount comes with rails that can be adjusted to any setting between 20.5" and 36".

This 6U server rack cabinet lets you mount your EIA-310 compliant equipment to the wall. The enclosure features a mounting depth up to 16.9 in. and offers a maximum load capacity of 200 lb. (90 kg). Save space in your office or server room Save valuable floor space, by wall-mounting the enclosure. The wall-mounted design makes this enclosure the ideal solution for optimizing equipment storage in your classroom, retail store, server room or office. This rack also includes a 1U shelf that gives you a stable surface for storing your tools or placing equipment that's not rack-mountable..Save space by wall-mounting your servers or networking equipment.Easily install your equipment with mounting hardware included.Secure your mission-critical equipment with a locked enclosure

Use this wall mount network cabinet to mount your server or networking equipment to the wall with a hinged enclosure for easy access - Save space with a wall mount network rack cabinet - Hassle-free access with a hinged wall mount cabinet - Secure your equipment with a locked wall mount server rack cabinet - Network enclosure / Server cabinet / Wall mount rack / Wall mount data rack / Server rack enclosure / Wall mount rack enclosure cabinet / Server enclosure / 12U rack / Wall mount enclosure.Save space by wall-mounting your servers or networking equipment.Hassle-free access with a hinged cabinet.Secure your mission-critical equipment with a locked enclosure.Easily install your equipment with adjustable mounting rails.Houses your deep rack-mount equipment with mounting depth up to 32 in..1U shelf and hook-and-loop cable tie included.Use this wall mount network cabinet to mount your server or networking equipment to the wall with a hinged enclosure for easy access

The Tripp Lite SmartRack 6U low-profile switch-depth-plus wall-mount rack enclosure cabinet in black, is perfect for use in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space. Cabinet measuring 14.6" x 23.6" x 21.7", has durable steel construction for longer endurance. This enclosure cabinet has a maximum weight capacity of 200 lbs and static/stationary weight capacity of 90.70 lbs. It has wall-mounting holes spaced 16" apart for easy and standard wall stud placement. It comes with 12 M6 screws, 12 M6 cage nuts, 12 M6 cup washers, 12 12-24 screws, removable mounting plate, three mounting plate screws and two keys..Rack cabinet used in classrooms, back offices and other areas with limited floor space.Dimensions: 14.6"H x 23.6"W x 21.7"D (unit), 6U"H x 19"W x 20.5"D (rack).Color: Black, Material: Steel.Maximum weight capacity: 200 lbs..Static/stationary weight capacity: 90.7 lbs..Rack height: 6U, Rack width: 19", Rack depth: 20.5".Grounding lug: Front and back door frames.Perfect for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space.Side panels and front door lock securely to help prevent damage, tampering or theft, vented panels allow generous airflow that keeps equipment cool.Rotate cabinet 180 deg before mounting to open reversible front door left or right, convenient ports with removable covers.Ships fully assembled for quick installation, mounts to wall or rolls on floor with tripp lite’s optional SRCASTER caster kit.Wall-mounting holes spaced 16" apart for standard wall stud placement.Vertical mounting rails adjust in 0.875" increments to accommodate equipment up to 20.5" deep, such as network switches and patch panels.Rails adjust easily - unscrew them, slide them to desired depth and screw them back in, Rails support square-hole or threaded-hole mounting.Rack spaces numbered for easy reference.Includes: Wall-mount rack enclosure cabinet, 12 x M6 screws, 12 x M6 cage nuts, 12 x M6 cup washers, 12 x 12-24 screws, removable mounting plate.Meets EIA-310-E, RoHS certificates and standards.Weight: 200 lbs. max, 90.7 lbs. static capacity

Control your server or KVM switch from a centralized rack console. This rack-mount KVM console provides complete keyboard, monitor and mouse control for a single server or multiple servers, connected through a separate KVM switch (sold separately). The 19 in. console installs into 1U of rack space, offering a space-efficient solution for complete console control. Maximize your IT budget, minimize your hassle This KVM console provides all the essential controls you'll need to manage your server room at a low cost. The console features a built-in keyboard and a touchpad for intuitive control, as well as an LCD display that supports resolutions up to 1280x1024. Maximize your screen space This versatile LCD console has a 19 in. screen. The increased screen space allows you to run multiple applications on the same screen, increasing your productivity. Clutter-free monitoring The rack-mount LCD console slides out from 1U of rack space, enabling you to easily monitor and control a single server or multiple servers when connected through a KVM switch. The rack-mount VGA console features a handle that makes it easy to slide the console in and out of the server rack, keeping your area organized and clutter-free. Hassle-free system integration The rack console features a single-port KVM module, which enables you to connect it directly to a server. The module offers the flexibility you need to easily integrate it into your existing server infrastructure. The RKCONS1901 is backed by a StarTech.com 2-year warranty and free lifetime technical support..VGA: Yes.Number of VGA Ports: 1.Screen Resolution: 1280 x 1024.Black

The Tripp Lite SRWF2U SmartRack 2U vertical-mount switch-depth wallmount rack enclosure cabinet extends less than 5" from the wall while housing equipment up to 20" deep. This cabinet is suitable for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space. The cabinet houses EIA-standard 19" rack equipment and it has a maximum load capacity of 150 lbs. This cable with reversible front door can open left or right by rotating the cabinet 180-deg before mounting and the top and bottom ports allows easy cable routing..Wall mount rack enclosure cabinet is perfect for network wiring closets, retail locations, classrooms, back offices & other areas.Dimensions: 73.15 cm H x 65.02 cm W x 11.43 cm D.Heavy-duty steel construction with a durable black powder-coated finish.Compatible with Server.2U rack height.Device depth: 43.18 - 50.80 cm.Reversible front door locks securely to help prevent damage, tampering or theft.Front door latch also accommodates a user-supplied padlock for added security.Vented cabinet keeps equipment cool, convenient ports with removable covers allow cable routing through top and bottom.Low-profile vertical-mount cabinet extends less than 5" from wall while housing equipment up to 20" deep, including network switches & patch panels.Wall-mounting holes spaced 16" apart for standard wall stud placement.Also includes a slide-out 1U mounting bracket at the top of the enclosure for patch panels up to 2 1/2" deep.Rails adjust easily - unscrew them, slide them to desired depth and screw them back in.Threaded mounting holes support M6 or 12-24 mounting, rack spaces marked for easy reference.Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance.Includes 12 x M6 screws, 12 x M6 cup washers, 12 x 12-24 screws, 2 x keys, owner’s manual.Meets EIA-310-E, Green compliant, RoHS standards.Weight: 23.31 kg.Comes with 5 years limited warranty

The Tripp Lite SmartRack low-profile UPS-depth rack enclosure cabinet with 200 lbs load capacity, stores and organizes 12U of 19" rack equipment up to 24.5" deep in locations with limited floor space. It has clear acrylic window that lets you monitor equipment without unlocking the door. Vented panels promote ample airflow that keeps equipment cool. Cabinet has convenient ports with removable covers to facilitate cable routing through top and bottom. It is suitable for network for network wiring closets, retail locations, classrooms and back offices. Cabinet with hinged back swings away from the wall to allow convenient back-door access to equipment and cabling. This wall mountable cabinet avoids equipment tampering and minimizes acoustic noise..Rack height: 12U.Weight capacity: 200 lbs..Dimensions: 25.06"H x 23.63"W x 25.5"D.Device depth: 3" - 24.5".Perfect for network wiring closets, retail locations, classrooms, back offices & other areas with limited floor space where equipment need to secure.Shatter-resistant clear acrylic front window prevents equipment tampering while minimizing acoustic noise and provides extra visual flair.Side panels and front door lock securely to prevent damage and tampering or theft.Vented panels allow generous airflow that keeps equipment cool.Rotate cabinet 180 deg before mounting to open reversible doors left or right.Hinged cabinet for convenient access swings away from the wall to allow easy back-door access to equipment and cabling during installation.Wall-mounting holes spaced 16" apart to accommodate standard wall stud placement.Rails support square-hole or threaded-hole mounting.Rack spaces numbered for easy reference.Contains 20 x M6 screws, 20 x M6 cage nuts, 20 x M6 washers, 20 x 12-24 screws, two keys and owner's manual.Meets EIA-310-D, IEC 60297-3-100, IP20 Protection, RoHS certifications and standards.Weight: 64 lbs..Comes with 5 years limited warranty

The Tripp Lite SmartRack low-profile enclosure cabinet with a maximum capacity of 200 lbs, is a perfect for locations with limited floor space. This wall mount cabinet with swinging Plexiglass door, is designed to secure and organize 10U of 19" rack equipment up to 20 1/2" deep. The cabinet's door swings away from wall on hinge for easy back-door access while the door has clear acrylic window that allows you to monitor equipment without unlocking door..Maximum load capacity: 200 lbs..Swings away from wall on hinge for easy back-door access.Front door includes shatter-resistant clear acrylic window.Locking steel cabinet vented at sides, top and bottom.Secures 10U of 19" rack equipment up to 20 1/2" deep.Rotate cabinet 180 deg before mounting to open reversible doors left or right.Lets you monitor equipment without unlocking the enclosure.Prevents equipment tampering.Reduces acoustic noise.Provides extra visual flair.Side panels and doors lock securely to help prevent damage, tampering or theft.Vented panels allow generous airflow that keeps equipment cool.Convenient ports with removable covers allow cable routing through top and bottom.Wall mounting holes spaced 16" apart for standard wall stud placement.Rails adjust easily - unscrew them, slide them to desired depth and screw them back in.Rails support square-hole or threaded-hole mounting.10U rack height.Rack cabinet features side panels and doors lock securely to help prevent damage, tampering or theft.

Mount your server or networking equipment to the wall, using this adjustable 12U open frame rack - Easy installation with mounting points positioned 12 and 16 in. apart to match standard wall studs - Flat-packed for easy and cost-effective shipping - Network rack / server rack / Computer rack / Equipment rack / open frame rack / 12U server rack / 12U wall mount rack / wall mounted rack / small server rack / 12U rack.Accommodate larger devices with adjustable frame.Free up space by mounting your equipment on the wall.Easy installation with mounting holes spaced 12 and 16 in. apart to match standard wall studs.Comes in a flat-pack making it easy to transport.Open frame provides passive cooling for equipment.Mount your server or networking equipment to the wall, using this adjustable 12U open frame rack

Feature-rich 48U rack enclosure optimized for easy installation, managing cables, integrating power distribution, and maximizing airflow..Compatibility: Integrated with APC infrastruxure products, APC rack systems, optimized for high capacity cable management systems, vendor-neutral EIA-310 19in rack mounting.Rack size: 48U, 19".Black.Dimensions: 88.9"(H) x 23.6"(W) x 47.2"(D).Feature: Rich rack enclosure optimized for easy installation, managing cables, integrating power distribution, and maximizing airflow.Static/stationary weight capacity: 3004.9 lbs..Dynamic/rolling weight capacity: 2253.12 lbs..Minimum mounting depth 191.00 mm, maximum mounting depth 1060.00 mm.Door material gauge: 18, rail material gauge: 14, roof/top material gauge: 18, side panel material gauge: 18.Includes baying hardware, documentation CD, key(s), leveling feet, mounting hardware, pre-installed casters, side panels, user manual.Weight: 329.7 lbs..Warranty: 5 years limited

Protect patch panels, network switches, and other valuable rack equipment in this heavy-duty steel rack enclosure cabinet. Front, bottom, and side panels are vented to allow cooling, while top and bottom ports simplify cable routing. The cabinet comes pre-assembled and supports both square-hole and 12-24 threaded-hole wall mounting. With a maximum load capacity of 200 pounds, this Tripp Light SmartRack 6U rack enclosure easily accommodates all your rack equipment..Wall-mountable enclosure cabinet secures and organizes 6U of 19" rack equipment in network closets, classrooms, and other locations with limited floor space.Dimensions: 14.5"H x 23.63"W x 17.5"D.Side panels and front door lock securely to help prevent damage, tampering, or theft.Vented panels allow generous airflow that keeps equipment cool.Front and back door frames.Rack height: 6U.Meets or exceeds UL, EIA-310-E, RoHS, IP20, PCI DSS, CSA 60950-1 standards.5-year manufacturer limited warranty.Organize and house rack equipment securely in this Tripp Lite SmartRack 6U wall mount rack enclosure cabinet.

Providing centralized control of your single PC or dozens of servers, this dual rail rackmount KVM console also gives you easy access to and visibility of your system while it's mounted in a server rack or cabinet. Dual Rail Design: The dual rail KVM console design maximizes space in your datacenter's rack cabinets by allowing the LCD monitor and the keyboard/mouse to move separately from each other. You can tuck the keyboard away while the display stays active, allowing you to conveniently monitor your computer through closed glass or mesh rack cabinet doors. High Definition LCD Monitor: The 1080p KVM console is 17.3" and LED back-lit, for low power consumption. It supports high definition resolutions up to 1920x1080 providing sharper video performance. Digital & Analog Support: Whether you are running a multi-port KVM with an analog display or a single port KVM with a high definition display, this DVI/ VGA KVM console can support both signals. Simple Setup: This KVM console comes with everything you need to set up: ? 1 Audio Cable ? 1 Set of KVM Cables (USB/VGA) ? 2 Rear Mounting Brackets ? M5 Cage Nuts and Screws Once your KVM console is mounted to your rack, you can use the USB port on the front to easily connect any USB compatible peripheral such as a fingerprint scanner or mousethumb drive. StarTech offers a wide selection of KVM consoles to help you access your systems more efficiently without the expense and clutter of extra peripherals. This dual rail KVM console is backed by a 2-year warranty and free lifetime technical support..Slide the rackmount monitor and keyboard/mouse independently with dual-rail KVM console design.1080p KVM console supports high-definition resolutions up to 1920x1080.Supports both digital and analog connections with DVI and VGA ports.Set up easily with included brackets, cables and screws.Connect a fingerprint scanner or other peripheral to the USB port on front of KVM console