Gigabit Access Points
83 results
The Access Point WiFi 6 Pro (U6 Pro) is a high-performance, dual-band WiFi 6 access pointideal for home and ofce use. The U6 Pro is capable of reaching an aggregate throughput rate up to 5.3 Gbps with its 5 GHz (4x4 MIMO) and 2.4 GHz (2x2 MIMO) bands, which allows itto support over 300 concurrently connected clients while maintaining an even, reliable wireless experience across your entire network. It can also isolate your guesttrafc to ensure optimal security and speed. The U6 Pro also operates atfull 4x4 MIMO with 160 MHz channels to create high-capacity wireless uplinks and facilitate faster data transfer. It can be set up in minutes and fully managed with the UniFi Network application..Supports dual-band Wi-Fi (2.4 GHz and 5 GHz) operation, ideal for high-performance indoor wireless access point deployments..Delivers 802.11ax (Wi-Fi 6) wireless connectivity with a maximum data transfer rate of 4800 Mbps (4.8 Gbps)..Features Power over Ethernet (PoE) capability..Includes a Gigabit Ethernet (RJ-45) port with 802.3at PoE+ support for both data and power connectivity..Package includes the Access Point WiFi 6 Pro and a wall/ceiling mount for easy installation..Backed by a 2 year limited warranty.
Purpose-built to survive in the harshest outdoor environments, Aruba 580 Series outdoor access points are designed for the highest levels of performance and greater deployment flexibility – all backed by a limited lifetime warranty. Aruba 580 Series APs deliver the speed and reliability needed for large enterprise and Industrial IoT deployments with high-power Bluetooth and 802.15.4/Zigbee radios and flexible power options..Wireless dual-band (2.4GHz, 5GHz) outdoor access point designed for the highest levels of performance and greater deployment flexibility.Flagship Wi-Fi 6 performance and speed with a maximum aggregate data rate of 2.97 Gbps and dual-band 4x4 radios.Flexible connectivity and power options with support for 5 Gbps SmartRate Ethernet ports or 10Gbps SFP+ ports and 802.3bt Class 6 power or AC power.Supports direct AC power and Power over Ethernet (POE; on port E0 only).Supported frequency bands: 2.400 to 2.4835 GHz (ISM); 5.150 to 5.250 GHz (U-NII-1); 5.250 to 5.350 GHz (U-NII-2A); 5.470 to 5.725 GHz (U-NII-2C); 5.725 to 5.850 GHz (U-NII-3/ISM).Features built in omni-directional antennas (H and V polarized); 5Ghz antennas 4.5dBi uncorrelated avg (5.8dBi peak); 2.4GHz antennas 3.0dBi uncorrelated avg (4.4dBi peak); Bluetooth antenna 4.8dBi peak.Support for 5Gbps NBase-T Ethernet, up to 10Gbps SFP+, and 1Gbps (w/PoE Out).High-power Bluetooth and Zigbee radio for IoT connectivity with support for maximum range and performance.Aruba Intelligent Power Monitoring (IPM) allows the AP to operate if there is not enough PoE power as well as manage heat to prevent overheating in the most extreme environments.State of the art security with WPA3 and Enhanced open.Great for large-scale outdoor environments including universities, large enterprises, and industrial applications.Built to survive the harshest environments, the IP66/67 rated access point survives high wind, extreme temperatures, and moisture.Lifetime manufacturer limited warranty
The Juniper AP64 High Performance Multi Gigabit Outdoor Wireless Access Point ensures business continuity and operational efficiency in harsh environments. This high-performance, ruggedized and weather-resistant outdoor Wi-Fi 6E access point integrates AI for AX capabilities to automate network operation and boost Wi-Fi performance while providing real-time network insights..Designed for tri-band operation across 2.4 GHz, 5 GHz, and 6 GHz frequencies, suitable for both indoor and outdoor enterprise deployments..Supports Wi-Fi 6E (802.11ax) with a peak data transfer rate of 3600 Mbps (3.60 Gbps)..Includes Power over Ethernet (PoE) capability and complies with the Wi-Fi 6E standard..Provides wireless connectivity through Wi-Fi 6E and Bluetooth Low Energy (BLE) 5.3..Features a single 2.5 Gigabit Ethernet RJ-45 port for high-speed network access..Comes equipped with internal antennas, GPS/GNSS receiver, temperature sensor, and accelerometer..Operates using PoE as its primary power source, simplifying installation..Utilizes 2.4 GHz, 5 GHz, and 6 GHz bands to deliver optimal wireless performance..Complies with IEEE 802.11 a/b/g/n/ac/ax standards and integrates WIDS/WIPS for enhanced security..Limited 1-Year Manufacturer Warranty
Ubiquiti Networks designed airMAX AC radios for high performance and ease of installation. You have the freedom to deploy the Bullet AC anywhere in the world, as it allows for a high degree of flexibility in configuring channel bandwidths (subject to local country regulations. The Bullet AC eliminates the need to use RF cables and requires no special antenna or tools to install. There are no radio card / host board issues, no RF cable quality concerns, no mechanical stability concerns, and no enclosure mounting requirements. With the Bullet AC, operators can just plug in and go..Access Point is a fully integrated radio that delivers up to 300+ Mb/s real TCP/IP throughput.Dimensions: 7.48"H x 1.81"W x 1.81"D.Access point covers both 2.4GHz and 5GHz radio bands, covering a wide range of frequencies that work well for both short- and long-distance links.Meets or exceeds CE, FCC, and IC certifications.Networking interface: Gigabit Ethernet port; antenna connector: N-type connector.Throughput 160+ Mb/s at 2.4GHz, 300+ Mb/s at 5GHz.Maximum power consumption: 8W; output power: 22dBm.Power supply: 24VDC, 0.3A (minimum); power method: 24V passive PoE (pairs 4, 5+; 7, 8 return).ESD/EMP protection: +/- 24kV contact/air.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity 5% to 95% noncondensing.ETSI300-019-1.4 shock and vibration.1-year manufacturer limited warranty
The Cisco Catalyst 9124AX Series outdoor access points are next-generation Wi-Fi 6 access points encased in a rugged and robust design that service providers and enterprises can easily deploy. With the emergence of high-density networks and the Internet of Things (IoT), we are more dependent on wireless networks than ever before. An increasing number of devices connect to the network every year, ranging from high-performance client devices to low-bandwidth IoT devices. The Cisco Catalyst 9124AX Series outdoor access points provide a seamless experience, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11ax) standard, the Catalyst 9124AX Series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. The Catalyst 9124AX Series offers flexible deployment options for service providers and enterprise networks that need the fastest links possible for mobile, outdoor clients (smartphones, tablets, and laptops), and wireless backhaul. With options for internal or external antennas, the 9124AX Series gives network operators the flexibility to balance their desired wireless coverage with their need for easy deployment. The Catalyst 9124AX Series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides..Wireless dual-band (2.4GHz, 5GHz) outdoor access point intended for enterprises that need more wireless capacity and/or wider channels.AX dual-band access point.One port with PoE support.Wi-Fi 6 certification supports all mandatory 802.11ax features that include MIMO, OFDMA, TWT, and more.Contains a one 2.5 Gigabit Ethernet uplink port with PoE-in support (802.3bt), and one Gigabit Ethernet SFP ports.Power over Ethernet (PoE): 802.3bt or DC power.Dual radio for simultaneous dual-band operation (5GHz and 2.4GHz, 802.11ax, 4 x 4 MU-MIMO).Meets or exceeds the IP66/IP67 IEC 60529 Ingress Rating, MIL-STD-810F, NEMA 250-2008, EN 60068-2-5, MIL-STD-810E, Method 514.4 standards.One status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors.Safeguard sensitive data with WPA2/WPA3 and Enhanced Open.Cisco DNA software support.Lifetime manufacturer limited warranty
i24 is a gigabit dual-band ceiling access point that compliant with IEEE 802.11ac Wave 2, and offers a concurrent data rate up to 1167 Mbps. Powered by MU-MIMO technology, letting you enjoy better experience. And the built-in omni-directional antennas broaden the wireless coverage of a single AP. In addition, you are allowed to adjust its transmit power as required using the web UI, and use an IEEE 802.3at-compliant PoE sourcing equipment to power on it, achieving long-distance power supply without tampering your existing grid network. You are also allowed to use Tenda access controllers (AC) to configure and manage multiple i24 in a centralized manner..Access point operates on two wireless bands . The dual-band capability allows for more flexible and efficient wireless connectivity, making it suitable for both home and small business environments..Supports the 802.11ac Wave 2 wireless standard. It offers a maximum data transfer rate of 1167 Mbps (1.167 Gbps).This access point supports Power over Ethernet (PoE). it adheres to the Wi-Fi 5 standard, ensuring high-speed and reliable wireless connectivity..Provides robust wireless connectivity with the following features: Dual-Band Support: Operates on both 2.4 GHz and 5 GHz bands for flexible and efficient connectivity..includes the following connector, port, and interface types: One 10/100/1000 Mbps Ethernet Port (PoE) RESET Button SYS LED Indicator.In the box : Tenda I24 Access Point Power Adapter (DC: 12V 1A) Ethernet Cable User Manual Quick Installation Guide.Can be powered using: Power over Ethernet (PoE) DC power adapter (DC: 12V 1A).Certified by : Restriction of Hazardous Substances (RoHS)..Comes with a 3 year limited warranty.
The Grandstream GWN7664E is a high-performance AX6000 Wi-Fi 6 access point built for enterprise-grade indoor deployments. With dual-band 4×4:4 MU-MIMO and OFDMA technology, it delivers up to 6Gbps wireless throughput and supports 512 concurrent clients. Featuring dual 2.5G Ethernet ports, PoE+ support, and embedded controller management, the GWN7664E ensures seamless connectivity and advanced QoS for real-time applications in medium-to-large business environments..Dual-band indoor use with enterprise-grade access point performance..AX6000 standard and 6000Mbps wireless data transfer capability..PoE+ and integrates Wi-Fi 6 for high-speed network efficiency..802.11 a/b/g/n/ac/ax wireless connectivity protocols..2x 2.5G Ethernet ports, reset pinhole, and Kensington lock..Mounting kits and a quick start guide for easy installation..Powered via Ethernet using 802.3at PoE standards..2.4GHz and 5GHz bands for extended indoor coverage..Certified under FCC, CE, RCM, IC for global deployment..1-year manufacturer warranty.
The multifunctional Aruba 203R Remote AP delivers secure and fast 802.11ac wireless and wired network access to corporate resources for branch and home offices.: Unique in the industry, the compact Aruba 203R remote AP is software configurable to operate in either 1x1 dual radio mode, or 2x2 single radio mode. It supports up to 867Mbps in the 5GHz band or up to 400Mbps in the 2.4 GHz band when operating in single radio 2x2 mode. In dual radio 1x1 mode, the maximum data rates for the 203R AP are 433Mbps in the 5GHz band and 200Mbps in the 2.4GHz band. The 203R AP offers a variety of enterprise-class features, including role-based network access, policy-based forwarding, and Adaptive Radio Management (ARM), which gives remote workers the same high-quality Wi-Fi experience they get at corporate headquarters. When additional capacity is desired, this low-cost 203R AP can be quickly added to an existing Aruba WLAN to improve network performance. Managed by the Aruba Mobility Controller, the 203R AP supports centralized configuration, data encryption, policy enforcement and network services. It extends corporate resources to remote locations by establishing site-to-site VPN tunnels to the data center. With an integrated Aruba Beacon, the 203R AP simplifies the remote management of a large scale network of battery-powered BLE Aruba Beacons and provides advanced location and indoor wayfinding, and proximity-based push notification capabilities. For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, APs can configure themselves when powered up, slashing the cost and time to deploy wireless in remote branches and home offices. UNIQUE BENEFITS: Deploy with or without controller: The 203R can be deployed in either controller-based (ArubaOS) or controllerless (InstantOS) deployment mode. New 802.11ac flexible radio architecture: The 203R AP is software configurable to operate in either 1x1 dual radio mode, or 2x2 single radio mode. Supports up to 867Mbps in the 5GHz band (with 2SS/VHT80 clients) or up to 400Mbps in the 2.4 GHz band (with 2SS/VHT40 clients). In 1x1 dual radio mode, these max speeds are up to 433Mbps (5GHz) and 200Mbps (2.4GHz). Built-in Bluetooth Low-Energy (BLE) radio : Delivers location-based services for BLE-enabled mobile devices. Enables management of your deployment of battery-powered Aruba Beacons. Advanced Cellular Coexistence (ACC) : Minimizes the impact from out-of-band interference from sources such as 3G/4G cellular networks..When connected to a compatible router or a network switch, this wireless access point lets you enjoy wireless internet connectivity throughout your home or office.Ensure speedy data transfer of up to 867 Mbit/s with the IEEE 802.11ac wireless technology.Gigabit Ethernet port for ultra-fast wired network speeds.Its management capability provides efficient control over setup and configuration of your network
Netgear WAX610PA dual band PoE Multi-Gig Insight Managed WiFi 6 access point. Get powerful and reliable WiFi 6 connectivity for all your devices, even in high-density environments. Simplified enterprise-grade security and networking for the smaller business. Power adapter included..Dual band PoE Multi-Gig Insight managed WiFi 6 access point.Dimensions: 1.30"H x 6.33"W x 6.33"D.Comes in white.Faster and more reliable WiFi due to higher throughput and more coverage with the use of both 2.4Ghz and 5Ghz bands simultaneously.Extra wired 2.5Gbps Ethernet port that's backward compatible with 100/1000Mbps Ethernet for easy wiring, WAX610PA version includes power adaptor for non-PoE installations.Wire-free installation with other WAX610, WAX610Y, WAC540, or WAC564 creates the perfect seamless business network..Maximum of users: 250.Concurrent users: 30.2.5G Ethernet port.Separate and secure networks for admin, guests, employees and IoT like cameras, locks and more
The Cisco Catalyst 9120AX series access points are resilient, secure, and intelligent. We are more dependent on our wireless networks than ever before. Additional devices connect to the network every year, and the Cisco Catalyst 9120AX series access points will provide a seamless experience anywhere for everyone. Going beyond the Wi-Fi 6 (802.11ax) standard, the 9120AX series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending Cisco's intent-based network and perfect for networks of all sizes, the Cisco Catalyst 9120AX series scales to the growing demands of IoT while fully supporting the latest innovations and new technologies. Not only that, but the 9120AX series is a leader in performance, security, and analytics. The Cisco Catalyst 9120AX series access points, paired with Cisco DNA, are enterprise-class products that will address your current and future needs. These access points are the first step in updating your network so that you can take better advantage of all of the features and benefits that Wi-Fi 6 provides..Wireless dual-band (2.4GHz, 5GHz) indoor access point intended for enterprises that need more wireless capacity and/or wider channels.AX dual-band access point.One port with PoE support.Wi-Fi 6 certification supports all mandatory 802.11ax features that include MIMO, OFDMA, TWT, and more.Contains a two 2.5 Gigabit Ethernet uplink port with PoE-in support (802.3at), USB 2.0 @ 4.5W host interface, Auto-MDIX, and management console port (RJ-45).Power over Ethernet (PoE): 802.3at.Dual radio for simultaneous dual-band operation (5GHz and 2.4GHz, 802.11ax, 4 x 4 MIMO).Meets or exceeds the UL2043,EN 55032 (rev. 2015), EN 301 489-17 (v3.1.1 2017-02), UL 60950-1, and EN 301 893 (v2.1.1) standards.Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors.Compact multi-RF connector with DART interface.Cisco Catalyst 9120AXE access points are certified for use with antenna gains up to 6dBi (2.4GHz and 5GHz).Safeguard sensitive data with WPA2/WPA3 and Enhanced Open.Cisco DNA software support.Lifetime manufacturer limited warranty
The AP-3064 provides 802.11ax Wi-Fi 6 network capabilities, ideal for networks requiring greater device traffic capacity, higher data transfer speeds, and broader coverage with lower latency. Four dual-band antennas produce a high-powered signal to maximize signal strength across the network and a 2.5 GbE connection ensures greater data transfer capabilities. 4x4 concurrent dual-band wireless Concurrent 2.4GHz and 5GHz with beamforming Flexible mounting plate design for easy precision install 2.5 Gbps RJ45 PoE+ LAN port (30W) VLAN support for creating a secure guest network.Dual Band 2.4GHz and 5GHz Wireless Access Point.IEEE ax, 2.4GHz and 5GHz, 2400 Mbps to 5000 Mbps.2.5 Gbps RJ45 PoE+ LAN port (30W), Wi-Fi 6.4x4 concurrent dual-band wireless.Number of Network 1, 2.5 Gbps RJ45.Certifications CB Report FCC IC RoHS TAA.Limited Warranty 3 Year.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This kit includes five dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.
The Grandstream GWN7662 is a high-performance AX6000 Wi-Fi 6 indoor access point designed for small-to-medium businesses and high-density environments. Featuring dual-band MU-MIMO with OFDMA technology, it delivers up to 5.38Gbps wireless throughput and supports 256 concurrent clients. With embedded controller management, dual Gigabit ports, and PoE/PoE+ support, the GWN7662 ensures seamless deployment and reliable performance for voice-over-Wi-Fi and real-time applications..Dual-band indoor use with enterprise-grade access point capability..AX6000 standard and 5380Mbps wireless data transfer performance..PoE/PoE+ and integrates Wi-Fi 6 for modern network efficiency..802.11 a/b/g/n/ac(Wave-2)/ax wireless connectivity protocols..Includes 1G and 2.5G Ethernet ports, reset pinhole, and Kensington lock..Mounting kits and a quick installation guide for setup..Powered via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz bands for extended indoor coverage..Certified under FCC, CE, RCM, IC, UKCA for global compliance..1-year manufacturer warranty.
The Wi-Fi 6 (802.11ax) AP63 Series access points driven by Mist AI offer high performance Wi-Fi to ensure enterprise business continuity and operation efficiency in outdoor environments. The ruggedized and weather resistant access points can be deployed in extremely harsh environments to meet expected SLE and deliver unprecedented user experience. The AP63 Series integrates the Juniper patented AI for AX capabilities and dynamic Virtual Bluetooth LE (vBLE) antenna array to automate network operation and boost Wi-Fi performance, while providing real-time network insights and location services. Managed by the Juniper Mist Cloud Architecture, the outdoor AP63 Series is ideal for retail curbside, enterprise campus, public venue, outdoor station, and industrial site environments. Juniper brings true innovation to the wireless space with the world’s first AI-driven Wireless LAN (WLAN). The Juniper AI-Driven Network makes Wi-Fi predictable, reliable and measurable with unprecedented visibility into the user experience through customizable Service Level Expectation (SLE) metrics. Time consuming manual IT tasks are replaced with AI-driven proactive automation and self-healing, lowering Wi-Fi operational costs and saving substantial time and money. All operations are managed via the open and programmable microservices with Juniper Mist Cloud Architecture. This delivers maximum scalability and performance while also bringing DevOps agility to wireless networking and location services..This access point supports dual-band operation on 2.4GHz and 5GHz frequencies, designed for outdoor environments such as enterprise campuses, public venues, and industrial sites..It uses the latest IEEE 802.11ax (Wi-Fi 6) standard and delivers a maximum data transfer rate of up to 3548 Mbps for high-performance connectivity.The device is powered via Power over Ethernet (PoE) and complies with Wi-Fi 6 technology for improved speed, efficiency, and capacity.It offers seamless wireless connectivity with integrated Bluetooth® LE and Mist AI-driven automation for optimized network performance.The access point includes a 1x Gigabit Ethernet port for wired uplink and PoE power delivery.Package includes the Juniper Mist AP63E-US access point unit and mounting hardware for easy installation.Comes with a one-year limited warranty from Juniper Networks for hardware reliability and support
This kit includes three dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.
The Grandstream GWN7661 is a sleek in-wall AX1800 Wi-Fi 6 access point designed for small-to-medium businesses, hotels, and residential spaces. With dual-band 2×2:2 MU-MIMO and OFDMA technology, it delivers up to 1.77Gbps wireless throughput and supports over 500 concurrent clients. Featuring four Gigabit Ethernet ports, PoE/PoE+ support, and embedded controller management, it ensures seamless connectivity for both wired and wireless devices while blending discreetly into any environment..Dual-band in-wall use with enterprise-grade access point design..AX1800 standard and 1770Mbps wireless data transfer performance..PoE/PoE+ and integrates Wi-Fi 6 for modern network efficiency..802.11 a/b/g/n/ac/ax wireless connectivity protocols..4x 1G Ethernet ports and a reset pinhole interface..Mounting kits and a quick installation guide for setup..Powered via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz bands for reliable indoor coverage..Certified under FCC, CE, RCM, IC, UKCA for global compliance..1-year manufacturer warranty.
This kit includes five dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 2333 Mb/s over the 2.4 GHz and 5 GHz frequencies. Both of the 240AC's Gigabit Ethernet ports support 802.3af/at power over Ethernet, allowing you to transfer both data and power over a single cable, which can be passed through to IP cameras and other devices when connected to a compatible switch. Alternatively, you can power the access point with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1733 Mbps.Number of ports and Type: 2 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.5 x W 7 x D 7 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 13.2 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your small-to-midsize business with fast and reliable Wi-Fi connections by connecting the Cisco Business 240AC Dual-Band Wireless Access Point to your compatible network router or switch.
Compact, ceiling-mounted WiFi 6 AP with 4 spatial streams that improves upon the U6 Lite with higher performance and dual-band WiFi 6 support. Ideal for small and medium-sized businesses..Gigabit Ethernet port for ultra-fast wired network speeds.Up to 10x faster than standard Ethernet connectivity for your wired network.3 Gbit/s wireless transmission speed is ideal for fast data transfer with maximum reliability.Data Encryption feature effectively protects your precious and valuable data from unauthorized access.Wall Mountable form factor for your usage convenience and better reliance.Create a reliable wireless business network with this wireless access point that features a high-speed data transfer rate.IEEE 802.11 a/b/g/n/ac/ax wireless LAN standard ensures trouble-free and convenient connectivity
The TP-LINK AX3000 dual-band Wi-Fi 6 access point is designed for business environments requiring high-performance Wi-Fi. Next-era business Wi-Fi 6 with speeds up to 2976Mbps brings more than twice the speed of Wi-Fi 5. Every application feels more fluid with drastically improved Wi-Fi speeds. Wi-Fi 6 features such as OFDMA and MU-MIMO handle multiple clients across congested environments like typical office spaces, lodging, and hospitals. Enjoy faster speeds on more devices with less lag..Dual-band Wi-Fi 6 access point designed for business environments requiring high-performance Wi-Fi.Offers simultaneous 574Mbps on 2.4GHz and 2402Mbps on 5GHz (2976Mbps in total) Wi-Fi speeds.Supports both 802.3at PoE+ and DC (adapter included) power supply for flexible installations.Includes 1 x Gigabit Ethernet (RJ45) port.Package includes: access point, power adapter, ceiling/wall mounting kits, and installation guide.Power supply: 802.3at PoE, 12VDC, or 48V passive PoE.Frequencies: 2.4GHz and 5GHz.Meets or exceeds the CE, FCC, and RoHS standards.Doubles the data at peak transmission times on a single stream with HE160.Omada mesh enables wireless connectivity between access points for extended range and flexible deployment.Omada SDN integration manages the whole network locally or from the cloud via web UI or the Omada app.Intelligent self-organization optimizes the best path between EAPs, while self-healing ensures you stay online even when one AP is disrupted.Ensures that customers enjoy uninterrupted streaming when moving around by switching clients automatically to the access points with the optimal signal.Exceptional performance with compact design ensures simple Wi-Fi installation while saving space.With advanced enterprise security, WPA3 provides more data security for previously unsecured and open Wi-Fi hot spots.System requirements: Microsoft Windows XP/Vista/7/8/10/11 or Linux.2-year manufacturer limited warranty
Ideal for small and medium-sized networks, the Cisco Business 240AC Access Point delivers industry-leading performance for enterprise-class 4x4 Multi-user Multiple-Input Multiple-Output (MU-MIMO), four spatial stream access points that support the Institute of Electrical and Electronic Engineers (IEEE) 802.11ac Wave 2 standard. The Cisco Business 240AC Access Point extends support to a new generation of Wi-Fi clients, such as smartphones, tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1733 Mbps.Number of ports and Type: 2 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.5 x W 7 x D 7 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 13.2 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.The Cisco Business 240AC Access Point delivers an ideal blend of predictable performance in a compact form.
The NanoStation AC represent the next evolution of the iconic CPE design that revolutionized the wireless ISP industry. The NanoStation AC provides a secondary Ethernet port with software-enabled PoE. Use this port to conveniently power an external device, such as a PoE security camera, for seamless IP video integration. NanoStation AC model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. The NanoStation AC feature enhanced protection against ESD events. airOS8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..Access point has a dedicated Wi-Fi radio for management and is suitable for indoor and outdoor installations.Dimensions: 10.12"H x 3.31"W x 1.18"D.Compatible with airOS 8.Comes in white and made of UV-resistant polycarbonate.Powerful wireless features: access point PtMP airMAX mixed mode, airMAX ac protocol support, long-range point-to-point (PtP) link mode; selectable channel width: PtP (10/20/30/40/50/60/80MHz), PtMP (10/20/30/40MHz); automatic channel selection; transmit power control: automatic/manual; automatic distance selection (ACK timing); strong WPA2 security.Usability enhancements: airMagic channel selection tool, dynamic configuration changes, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including RF diagnostics and airView spectrum analyzer.Features airMAX technology and a dedicated Wi-Fi radio for management.This model utilizes the latest ESD protection to help protect against power surges.The radio and antenna are combined into a single body that takes up minimal space.No fasteners are required for pole‑mounting, and a single wall fastener (not included) is required for wall-mounting.Power supply: 24V, 0.5A Gigabit PoE supply (included); maximum power consumption: 9W.Power method: 802.3af alternative A (pairs 1, 2+; 3, 6 return); 24V passive PoE (pairs 4, 5+; 7, 8 return); gain: 16dBi.Networking interface: 10/100/1000MB/s Ethernet ports; channel bandwidths: 10/20/30/40/50/60/80MHz.Processor specs: Atheros MIPS 74Kc, 560MHz; memory: 64MB DDR2; cross-pol isolation: 20dB minimum.Polarization: dual linear; LEDs: power, Eth1, Eth2; signal strength.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity: 5 to 95% noncondensing.ETSI300-019-1.4 shock and vibration.Meets or exceeds CE, FCC, IC standards
This kit includes dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.
Perfect for smaller networks, the Cisco Business 150AX access point brings a full slate of Cisco high-performance functionality to the business environment at an affordable price point. The Cisco Business 150AX access point delivers industry-leading wireless performance with support for the latest Wi-Fi 6 standard, IEEE's 802.11ax. It also meets the growing flexibility of wireless networks by introducing mesh technology which enables scalable expansion of the network where network cabling may not exist, all while delivering a simple user experience, deployable with the Cisco Business Mobile app or the integrated WebUI. The 150AX access point extends coverage and capacity to Wi-Fi clients such as smartphones, tablets, and high-performance laptops that have integrated Wi-Fi 6 capabilities, while being backward compatible with the previous 802.11ac Wave 1 or Wave 2 standards..Perfect for smaller networks, this dual-band access point brings a full slate of high-performance functionality to the business environment at an affordable price point.Provides up to 1480Mbps with the AX standard.Wi-Fi 6 delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density or high-definition collaboration apps.Integrated Bluetooth Low Energy (BLE) 5 radio (for future use).Contains 1 x Gigabit Ethernet (10/100/1000BASE-T auto-sensing) port.Includes a mounting bracket and hardware.Powered by a passive Power over Ethernet injector.Integrated antenna: 2.4GHz (peak gain 4dBi, internal antenna, omnidirectional in azimuth), 5GHz (peak gain 5dBi, internal antenna, omnidirectional in azimuth).Meets or exceeds the UL 60950-1, CAN/CSA-C22.2 No. 60950-1, IEC 60950-1, EN 60950-1, IEC 62368-1, EN 62368-1, UL/CUL 62368-1, FCC Part 15.247, 15.407, RSS-247, EN 300328, EN 301893, EN 50385, ARIB-STD 66, ARIB-STD T71, EMI, FCC Part 15B, ICES-003, VCCI(Japan), EN 301489-1 and -17, EN 55032, EN55035 standards.Supporting two spatial streams, MU-MIMO enables the access point to split spatial streams between client devices to maximize throughput.Easily deploy and manage without a physical controller or licensing, using your favorite web browser with the integrated WebUI or using your mobile device with the Cisco Business Mobile app.Easily enhance your wireless coverage and capacity without network cabling and Ethernet switches, mix and match Cisco Business Wi-Fi 6 Mesh Extenders and/or Access Points to extend seamless Wi-Fi coverage throughout your business or workplace.Flexible deployment models supporting multiple concurrent use cases required by small businesses, including point of sale systems, surveillance cameras, secure guest access, and more.Offers a cloud-based security service to protect your business and connected wireless users, devices, and guests.Designed with flexible mounting options in mind; you can mount it directly on the ceiling (primary orientation) or vertically on a wall (secondary orientation).OFDMA based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RU), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.Provides maximum number of associated wireless clients: 200 per Wi-Fi radio, for a total of 400 clients per access point, or 1000 in a system.3-year manufacturer limited warranty
These economical Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing mobile, cloud and IoT requirements. With a wireless aggregate data rate of up to 1.5 Gbps and gigabit local wired ports, they deliver the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike. The Aruba 503H series APs are designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features include Orthogonal frequency-division multiple access (OFDMA), and cellular optimization. With up to two spatial streams (2SS) and 80MHz channel bandwidth, the 503H series provides groundbreaking wireless capabilities for budget-conscious deployments.This access point provides high performance and cost-effective Wi-Fi 6 (802.11ax) for hospitality, branch, and teleworker deployments.With a wireless aggregate data rate of up to 1.5Gbps, delivers the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike.Contains three Ethernet wired network ports (RJ45) with auto-sensing link speed (10/100/1000BASE-T) and MDI/MDX.Dimensions: 5.9"H x 3.39"W x 1.57"D.Maximum power consumption: 10W DC powered, 11.4W POE powered.Two integrated semi-directional antennas for 2 x 2 MIMO with peak single antenna gain of 2.5dBi in 2.4GHz and 5.6dBi in 5GHz; built-in antennas are optimized for vertical wall or desk-mounted orientation of the AP.Meets or exceeds the FCC/ISED, CE, IEC/EN standards.Combine wireless and wired access in a single compact form factor.Perfect for organizations with work-from-home or teleworker initiatives.Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices.Lifetime manufacturer limited warranty
Extending Cisco's intent-based network and perfect for networks of all sizes, the Catalyst 9105 Access Points scale to meet the growing demands of IoT while fully supporting the latest innovations and new technologies. The Catalyst 9105 Access Points provide a seamless experience anywhere for everyone, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11 ax) standard, the Catalyst 9105 Access Points provides integrated security, resiliency, and operational flexibility as well as increased network intelligence..Enterprise grade versatile wireless access point perfect for networks of all sizes.Features data rates up to 1.488 Gbps.Equipped with one 10/100/1000 Base-T (Ethernet) Uplink Interface and one RJ-45 management console port.Dimensions: 1.18"H x 5.9"W x 5.9"D.Wi-Fi 6 (802.11ax) designed to use both the 2.4-GHz and 5-GHz bands.OFDMA-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting two spatial streams, MU-MIMO enables access points to split spatial streams between client devices to maximize throughput.Spatial reuse (also known as Basic Service Set [BSS] coloring) allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.A new power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis.Application Hosting on Catalyst 9100 Access Points helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks.Integrated Bluetooth Low Energy (BLE) 5 radio enables location-based use cases such as asset tracking, way finding or analytics.Container support enables edge computing capabilities for IoT applications on the host access point.Lifetime manufacturer limited warranty
Unlock the future of wireless connectivity with the HPE Aruba Networking 750 Series Campus Access Points, designed for high-performance, high-capacity, and secure Wi-Fi 7 connections. Ideal for demanding users and applications, these flagship access points deliver up to 18.7 Gbps maximum tri-band aggregate data rate, utilizing Wi-Fi 7 features like multi-link operation (MLO) and 4K QAM for faster speeds and lower latency. Key features include: Wi-Fi 7 Performance: Supports up to 18.7 Gbps with tri-band coverage (2.4 GHz, 5 GHz, 6 GHz), and optional dual 5 GHz/6 GHz modes for up to 28.8 Gbps. Enhanced Capacity: With three 4x4 MIMO radios and ultra-wide 320 MHz channels in the 6 GHz band, it's optimized for low-latency, bandwidth-intensive apps like AR/VR and high-definition video. Future-Ready: Get the most out of the 6 GHz band, doubling capacity and supporting the latest Wi-Fi 7 features. Security Built-In: Includes WPA3, Enhanced Open, MACsec support, and trusted platform module (TPM) for secure device authentication. Seamless Connectivity: Dual 10 Gbps Ethernet ports ensure high availability and redundant data/power connections, while built-in Bluetooth 6 and Zigbee radios simplify IoT integration. AI-powered Efficiency: Automatic power saving modes, intelligent power monitoring, and network optimization through AI-powered features like ClientMatch and AirMatch. Future-proof your network with the HPE Aruba 750 Series – delivering the performance, security, and resilience your organization needs to thrive in the era of Wi-Fi 7..Supports tri-band operation with 2.4 GHz, 5 GHz, and 6 GHz bands, providing flexible deployment in both dense and high-traffic environments, ensuring optimal coverage and capacity for large campuses and enterprise settings..Supports Wi-Fi 7 (802.11be) and offers a maximum data transfer rate of up to 18.7 Gbps, with potential for 28.8 Gbps in dual 5 GHz/6 GHz modes, delivering high-performance connectivity for bandwidth-intensive applications and reducing latency..Powered via PoE+ (Power over Ethernet) and supports Wi-Fi 7 (802.11be), ensuring high-speed wireless access with increased efficiency, reliability, and support for the latest generation of wireless technology..With support for multi-link operation (MLO) and advanced 4K QAM, the Aruba 750 Series enables fast, low-latency wireless connections for demanding applications like AR/VR, video streaming, and large-scale data transfer..Features dual 10GbE SFP+ uplink ports for high-speed wired connectivity, enabling fast data transfer and ensuring seamless communication between devices on the network..Included in the package are the Aruba 750 Series access point, mounting hardware, and quick start guide, along with support for a wide range of networking configurations..Powered by Power over Ethernet (PoE+), ensuring simplified power management and reducing the need for additional power cables or outlets, streamlining installation..Supports three frequency bands—2.4 GHz, 5 GHz, and 6 GHz—ensuring broad coverage, minimal interference, and increased capacity for dense environments like offices, campuses, and public spaces..Meets Wi-Fi 7 (802.11be) standards and is compliant with WPA3, Enhanced Open, MACsec encryption, and includes TPM for secure device authentication, ensuring network integrity and security..Comes with a limited lifetime warranty, offering peace of mind and ongoing support to ensure reliable, long-term performance for enterprise-grade networking needs.
Aruba Instant On AP11 Indoor access points include an easy to use web GUI and templates so access points are up and running in minutes. Comes with an integrated virtual controller for simple deployment of multiple access points. The Aruba Instant On AP11 indoor access point is built with premium hardware and software quality that's as reliable as coming from a trusted vendor. Effortless set-up right out of the box – in the palm of your hand..Entry-level wireless access points for small and growing businesses.Up to 867Mbps wireless data rate.Uplink Gigabit Ethernet port, with POE-in support.Dimensions: 1.3" x 6" x 6".DC power: 12V.Dual radio for simultaneous dual-band operation: 5GHz for up to 867Mbps wireless data rate and 2.4GHz for up to 300Mbps wireless data rate.Meets or exceeds UL 2043 plenum rating, EN 60601-1-1 and EN 60601-1-2, Wi-Fi Alliance standards.Support for WPA2/WPA3 protected employee and guest login with Enhanced Open for per user guest access.Ships with a (black) mount clip to attach to suspended ceiling rails, and a (white) mount clip to attach to solid surfaces (wall/ceiling).1-year manufacturer limited warranty
Aruba Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements. With a maximum real-world aggregate data rate of 2.97 Gbps (HE80/HE20), the 530 Series deliver the speed and reliability needed for any enterprise..AP-535 (US) dual radio 4x4:4 802.11ax internal antennas unified campus AP.AP type: idoor, dual radio, 5GHz and 2.4GHz 802.11ax 4x4 MIMO.Ports: E0, E1: HPE SmartRate port (RJ-45, maximum negotiated speed 5Gbps); USB 2.0 host interface (Type A connector).WPA3 and Enhanced Open security.Dimensions: 2.1"H x 9.4"W x 9.4"D.Lifetime manufacturer limited warranty
These economical Wi-Fi 6 access points provide high‑performance connectivity for any organization experiencing growing mobile, cloud and IoT requirements. With a wireless aggregate data rate of up 1.5 Gbps and gigabit local wired ports, they deliver the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike..Wireless dual-band (2.4GHz, 5GHz) hospitality access point for hospitality, branch, and teleworker deployments.Compliant with the Wi-Fi 6 standard with up to 1.5Gbps of maximum wireless throughput.Can be powered with 802.3af POE (class 3 or higher) on port E0.Includes an integrated Bluetooth 5.0 Low Energy and Zigbee (802.15.4) radio (2.4GHz) to simplify deploying and managing IoT-based location services, asset-tracking services, security solutions, and IoT sensors.Features 1 x auto-sensing 10/100/1000BASE-T and MDI/MDX RJ45 Ethernet uplink port with 802.3az EEE and 802.3af POE (class 3) support, 2 x auto-sensing 10/100/1000BASE-T and MDI/MDX RJ45 Ethernet ports.Bundle includes: AP-503H, desk mount, power adapter, NA power cord.AP supports direct DC power and Power over Ethernet.Supported frequency bands: 2.4-2.48GHz ISM; 5.15-5.25GHz U-NII-1; 5.25-5.35GHz U-NII-2A; 5.47-5.73GHz U-NII-2C; 5.73-5.85GHz U-NII-3/ISM; 5.85-5.9GHz U-NII-4.Features orthogonal frequency-division multiple access (OFDMA) that handles multiple Wi-Fi 6 capable clients on each channel simultaneously, regardless of device or traffic type for enhanced multiuser efficiency.Patented AI-powered ClientMatch technology eliminates sticky client issues by placing Wi-Fi 6 capable devices on the best available AP.Advanced Cellular Coexistence uses built-in filtering to automatically minimize the impact of interference from cellular networks, distributed antenna systems (DAS), and commercial small cell or femtocell equipment.Target Wake Time establishes a schedule for when clients need to communicate with an AP to improve client power savings and reduce airtime contention with other clients.To simplify policy enforcement, it uses Aruba's Policy Enforcement Firewall (PEF) to encapsulate all traffic from the AP to the Mobility Controller (or gateway) for end-to-end encryption and inspection.Includes security components to help protect user authentication and wireless traffic such as WPA3 and Enhanced Open, WPA2-MPSK, VPN tunnels, Trusted Platform Module, and more.Provides connectivity for a maximum of 256 associated clients per radio (512 in total).Operates as a stand-alone access point or with a gateway for greater scalability, security, and manageability.For hybrid environments, EdgeConnect Microbranch extends the WAN to the small office/home office to deliver a consistent employee experience no matter where users are located.Lifetime manufacturer limited warranty
These economical Wi-Fi 6 access points provide high‑performance connectivity for any organization experiencing growing mobile, cloud and IoT requirements. With a wireless aggregate data rate of up 1.5 Gbps and gigabit local wired ports, they deliver the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike..Wireless dual-band (2.4GHz/5GHz) indoor access point intended for hospitality, branch, and teleworker deployments.AX access point features maximum data rates of 1.2Gbps on the 5GHz band, and 287Mbps on the 2.4GHz band (for an aggregate peak data rate of 1.5Gbps).Two ports with PoE support.Wi-Fi 6 certification supports all mandatory 802.11ax features that include MU-MIMO, OFDMA, TWT, and more; supports PoE.Contains a SmartRate 2.5 Gigabit Ethernet uplink port, four 1 Gigabit Ethernet (two with PoE-in support), USB 2.0 host interface (Type A connector), and a DC power connector.Power over Ethernet (PoE): 802.3at.Dual radio for simultaneous dual-band operation: 5GHz and 2.4GHz 802.11ax MIMO.Meets or exceeds the Wi-Fi Alliance, Bluetooth SIG, Ethernet Alliance, EN 60601-1-1, and EN60601-1-2 standards.Support OFDMA and MU-MIMO for enhanced multi-user efficiency.Advanced Cellular Coexistence uses built-in filtering to automatically minimize the impact of interference from cellular networks, distributed antenna systems (DAS), and commercial small cell or femtocell equipment.Integrated Bluetooth 5 and 802.15.4 radio (for Zigbee support) to simplify deploying and managing IoT-based location services, asset tracking services, security solutions, and IoT sensors.Includes components of Aruba's 360 Secure Fabric to help protect user authentication and wireless traffic.Provides support for WPA2/WPA3 protected employee and guest login with Enhanced Open for per-user guest access.This AP can be used to establish a secure SSL/IPSec VPN tunnel to a mobility controller that is acting as a VPN concentrator.Aruba's Policy Enforcement Firewall (PEF) feature encapsulates all traffic from the AP to the mobility controller (or gateway).Trusted Platform Module (TPM) for secure storage of credentials, keys, and boot code.Provides connectivity for a maximum of 256 associated clients per radio (512 in total).Low-density parity check (LDPC) delivers high-efficiency error correction for increased throughput.Lifetime manufacturer limited warranty
The gigabit dual-band indoor/outdoor access point OAP1200 offers a concurrent data rate as high as 1167 Mbps. Equipped with 2 omni-directional high-gain antennas, OAP1200 provides a maximum coverage radius of 200 meters. OAP1200 can be installed either on the wall or around a pole. OAP1200 can meet different requirements by connecting antennas of different specifications to the standard RP-SMA connectors. With the IP65 enclosure, OAP1200 is designed for wireless coverage in factories, warehouses and other harsh outdoor environments..Tenda OAP1200 Outdoor Gigabit Wi-Fi Access Point is a dual-band device that provides high-speed internet connectivity for outdoor areas.Supports the 802.11ac wireless standard, offering a data transfer rate of up to 1167 Mbps on the 5 GHz band..Offers wireless connectivity through the 802.11ac wireless standard.Powered by MU-MIMO technology, a single OAP1200 can communicate with multiple wireless clients at the same time.OAP1200 allows clients that support either 2.4 GHz or 5 GHz band, or both, to connect to it at the same time.Achieve a concurrent data rate of 1167 Mbps, enabling seamless connectivity for multiple devices.With 2 omni-directional high-gain antennas, enjoy a maximum coverage radius of 200 meters, ensuring robust wireless signals across long distances..Mount the OAP1200 on walls or poles for versatile deployment options tailored to your environment.
The Aruba 505H series access points are designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features orthogonal frequency-division multiple access (OFDMA), multi-user MIMO and cellular optimization. With up to two spatial streams (2SS) and 80MHz channel bandwidth, the 505H series provides groundbreaking wireless capabilities for budget-conscious deployments. Provides high-performance connectivity for any organization experiencing growing mobile, cloud and IoT requirements. With a wireless aggregate data rate of up to 1.5 Gbps and Gigabit local wired ports, it delivers the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike..Hospitality access point provides high-performance connectivity for any organization experiencing growing mobile, cloud, and IoT requirements.Dimensions: 5.9"H x 3.39"W x 1.85"D.Comes in white.Uplink interfaces: smart rate Ethernet wired network port (RJ45) (auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX, 2.5Gbps speed complies with NBase-T and 802.3bz specifications, 802.3az Energy Efficient Ethernet (EEE), POE-PD: 48Vdc (nominal) 802.3af/at/bt POE (class 3, 4 or 6).Local interfaces: 4 x Ethernet wired network ports (RJ45).Combine wireless and wired access in a single compact form factor.Perfect for organizations with work-from-home or teleworker initiatives.Supports up to 1.5Gbps of maximum wireless throughput.Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices.AI-powered ClientMatch technology eliminates sticky client issues by placing Wi-Fi 6 capable devices on the best available AP.MPSK enables simpler passkey management for WPA2 devices: should the Wi-Fi password on one device or device type change, no additional changes are needed for other devices.Can be used to establish a secure SSL/IPSec VPN tunnel to a Gateway or Mobility Controller that is acting as a VPN concentrator.Meets or exceeds FCC/ISED, CE Marked, RED Directive 2014/53/EU, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, IEC/EN 60950, EN 60601-1-1, EN60601-1-2, IEC/EN 62368-1 standards.Lifetime manufacturer limited warranty
Aruba Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements. With a maximum aggregate data rate of 3.55 Gbps (HE80/HE40), the Aruba 530 Series deliver the speed and reliability needed for any enterprise..Wireless dual-band (2.4GHz, 5GHz) campus access point for high-density mobile and IoT deployments.Features Wi-Fi 6 standard with a combined peak datarate of up to 2.97Gbps.Can be powered with 802.3at/bt POE (class 4 or higher) on port E0 and/or E1.Includes an integrated Bluetooth 5.0 Low Energy and Zigbee (802.15.4) radio (2.4GHz) to simplify deploying and managing IoT-based location services, asset tracking services, security solutions and IoT sensors.Features 2 x 100/1000/2500/5000BASE-T RJ-45 HPE SmartRate ports, USB 2.0 Type-A host interface.AP supports direct DC power and Power over Ethernet.Supported frequency bands: 2.400 to 2.4835GHz ISM; 5.150 to 5.250GHz U-NII-1; 5.250 to 5.350GHz U-NII-2A; 5.470 to 5.725GHz U-NII-2C; 5.725 to 5.850GHz U-NII-3/ISM; 5.850 to 5.895GHz U-NII-4.Four (female) RP-SMA connectors for external dual band antennas.Target Wake Time establishes a schedule for when clients need to communicate with an AP to improve client power savings and reduce airtime contention with other clients.Includes components of Aruba's 360 Secure Fabric to help protect user authentication and wireless traffic.Can be used to establish a secure SSL/IPSec VPN tunnel to a Mobility Controller that is acting as a VPN concentrator.For enhanced device assurance, have an installed Trusted Platform Module (TPM) for secure storage of credentials and keys, and boot code.To simplify policy enforcement it uses Aruba's policy enforcement firewall (PEF) feature to encapsulate all traffic from the AP to the Mobility Controller (or Gateway) for end-to-end encryption and inspection.Provides connectivity for a maximum of 1024 associated clients per radio (2048 in total).Able to operate in either controllerless (Instant) or controller-based mode.Lifetime manufacturer limited warranty
For enterprises who need more wireless capacity and/or wider channels, Aruba 610 series Campus APs are designed to take advantage of the newly available 6GHz spectrum using a unique dual-radio/tri-band architecture. Adding support for the 6GHz band to the traditional 2.4GHz and 5GHz bands more than doubles the available wireless capacity in a wireless network - so you can meet growing demand due to bandwidth-hungry video, increasing numbers of client and IoT devices, and growth in cloud. Unique to Aruba, the 610 Series features two radios that can be tuned to any two of the three available spectrum bands for Wi-Fi (2.4GHz, 5GHz, 6GHz). This flexibility provides a cost-effective and compact platform that delivers full tri-band coverage as part of a multi-AP deployment and can be used with software that will intelligently and flexibly configure the radios of each of these dual-radio APs. More capacity and wider channels The Aruba 610 series APs are designed to take advantage of Wi-Fi 6E and the 6GHz band, which translates into far greater speeds, wider channels for multi-gigabit traffic, and less interference. Its two 2x2 MIMO radios deliver a combined peak data rate of up to 3.6Gbps when configured for concurrent 5GHz and 6GHz operation..Wireless tri-band (2.4GHz, 5GHz, 6GHz) campus access point intended for enterprises who need more wireless capacity and/or wider channels.Two 2 x 2 MIMO radios of this access point deliver a combined peak data rate of up to 3.6Gbps when configured for concurrent 5GHz and 6GHz operation.Compact and low power consumption – virtually unrestricted operation from an 802.3af (class 3) PoE source.AP is based on the 802.11ax (Wi-Fi 6) standard, which means that all its efficiency and security enhancements are also available on the 6GHz band.Features 1 x Ethernet wired network ports (RJ45), 1 x DC power, 1 x USB 2.0 host and 1 x serial console (proprietary, Micro-USB Type-B physical jack).Mounting bracket is preinstalled on the back of the AP to secure the AP to any of the mount kits (sold separately).AP supports direct DC power and Power over Ethernet (PoE) on port E0.Dynamic frequency selection (DFS) optimizes the use of available RF spectrum in the 5GHz band.Meets or exceeds FCC/ISED, CE Marked, RED Directive 2014/53/EU, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, UL/IEC/EN 60950, IEC/EN 62368-1, EN 60601-1-1, EN60601-1-2 standards.Up to seven 160MHz channels in 6GHz to support low-latency, bandwidth-hungry applications like high-definition video, and augmented reality/virtual reality applications.2.5Gbps Smart Rate Ethernet port to minimize wired bottlenecks.Built-in GPS receivers and fine time measurement (802.11mc) to enable APs to automatically locate themselves and serve as reference points for accurate indoor location measurements.AP is plenum-rated for use in air-handling spaces.Supported modulation types: 802.11b: BPSK, QPSK, CCK; 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM and 256-QAM (proprietary extension); 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM (proprietary extension); 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM.AP supports up to 512 associated client devices per radio, and up to 16 BSSIDs per radio (limited to four for the 6GHz radio).Maximum power consumption (without/with a USB device attached): DC powered: 12.5W/18.2W; POE powered: 14.7W/20.9W; this assumes that up to 5W is supplied to the attached USB device.Minimum operating system software versions: ArubaOS and Aruba InstantOS 8.11.0.0.Dimensions: 6.3"H x 6.3"W x 1.54"D.Regulatory domain: United States of America.Lifetime manufacturer limited warranty
For enterprises who need more wireless capacity and wider channels, HPE Aruba Networking 630 Series Campus Access Points are designed to take advantage of the 6 GHz band via three dedicated radios. By using the 6 GHz band, capacity is more than doubled – so you can meet growing demand due to bandwidth-hungry video, increasing numbers of client and IoT devices and growth in cloud. Unique to Aruba, the HPE Aruba Networking 630 Series Campus Access Points includes ultra tri-band filtering and dual 2.5 Gbps ethernet ports to eliminate coverage gaps, provide greater resiliency, and deliver fast, secure connectivity..Wireless tri-band (2.4GHz/5GHz/6GHz) indoor access point intended for enterprises that need more wireless capacity and/or wider channels.AX access point features maximum data rates of 2.4Gbps on the 6GHz band, 1.2Gbps on the 5GHz band, and 574Mbps on the 2.4GHz band (for an aggregate peak data rate of 3.9Gbps).One port with PoE support.Wi-Fi 6 certification supports all mandatory 802.11ax features that include MU-MIMO, OFDMA, TWT, and more; supports PoE.Contains a two 2.5 Gigabit Ethernet uplink port with PoE-in support (802.3at), USB 2.0 host interface (Type A connector), and a DC power connector.Power over Ethernet (PoE): 802.3at (Class 4), 12VDC.Comprehensive tri-band coverage across 2.4GHz, 5GHz, and 6GHz concurrent 802.11ax (2 x 2, MIMO) bands to deliver 3.9Gbps maximum aggregate data rate.Meets or exceeds the UL2043, Wi-Fi Alliance, Bluetooth SIG, Zigbee Alliance, Ethernet Alliance, EN 60601-1-1, and EN60601-1-2 standards.Up to seven 160MHz channels in 6GHz support low-latency, bandwidth-hungry applications like high-definition video and augmented reality/virtual reality applications.Two HPE Smart Rate Ethernet ports for hitless failover for both data and power that provide business continuity for mission-critical applications.Automated Wi-Fi radio frequency AirMatch management allows organization to automate network optimization using machine learning.OFDMA support allows to handle multiple 802.11ax capable clients on each channel simultaneously, regardless of device or traffic type.Air Slice technology monitors network usage, automatically allocates radio resources, and dynamically adjusts radio resources as new users connect and applications sessions begin or end.Advanced Cellular Coexistence uses built-in filtering to automatically minimize the impact of interference from cellular networks, distributed antenna systems (DAS), and commercial small cell or femtocell equipment.Provides support for WPA2/WPA3 protected employee and guest login with Enhanced Open for per-user guest access.Dynamic Segmentation eliminates the time-consuming and error-prone task of managing complex and static VLANs, ACLs, and subnets by dynamically assigning policies and keeping traffic secure and separated.Air Pass creates a roaming network across the Aruba enterprise customer footprint, extending cellular coverage and enhancing the visitor and subscriber experience.Lifetime manufacturer limited warranty