Gigabit Network Interface Cards

Enjoy the super fast Gigabit Ethernet connection by inserting this Gigabit Ethernet card into your computer.Enjoy superfast data transfer of up to 250 MB/s with PCI Express card, between the network card and motherboards.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.Dual-port Gigabit Ethernet, PoE support

This Gigabit Ethernet card guarantees a replacement networking interface to client, server or workstation.This 250 MB/s bandwidth PCI Express adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.With the 1000Base-X technology get up to 1000Mbps data transfer rate over the supported network cable.Up to 8 DECT cordless handsets

This Gigabit Ethernet card guarantees a replacement networking interface to client, server or workstation.For super-fast data transfer between your network and computer, the adapter takes advantage of the USB 3.0 connectivity.Connect to a wired network with this single port network adapter for a hassle-free and quick response

Allied Telesis™ Gigabit ethernet card is featured with jumbo frames to send large packets and these packets are normally up to 9000 bytes long. Gigabit ethernet is featured with PCIe x1 bus to enable maximum throughput..Flow control, ACPI support, auto-negotiation, load balancing, VLAN support, full duplex mode, jumbo Frames support.Data transfer rate: 1 Gbps.Host interface: PCI Express x1.Dimensions: 2.7"(H) x 3.6"(W).Form factor: Plug-in card.Wavelength: 850 nm.Max transfer distance (Optical): 720'.Status indicators: Link activity, link OK.Card height: Full-height, low-profile.Optical sensitivity: -17 dBm.Output optical power: -9.5/-1.5 dBm.Multi-mode fiber.VLAN support.jumbo frames.Weight: 2.08 oz..Allied Telesis™ Gigabit ethernet card is used to boost the speed of the network and is limited to a maximum size of 1548 byte.

The Allied Telesis 2911 series AT-2911SX/SC 1000SX network adapter has PCI Express x1 host interface, one SC port and RJ-45 port for connectivity. It is compatible with PC. This adapter measures 2.7" x 3.6". It has link activity and link OK status indicators. This adapter has ACPI support, auto-negotiation, flow control, full duplex mode, jumbo frames support, load balancing and VLAN support. It comes with full-height bracket and low-profile bracket. The Gigabit Ethernet adapter offers data transfer rate of 1 Gb/s..Network adapter interface: PCI Express x1.Network adapter speed: 100 Mbps.Multi-mode fiber.Network adapter ports: 1 x SC.Network technology: 1000Base-SX.Form factor: Plug-in card.Connector type: SC.Cabling type: Ethernet 1000Base-SX.Connectivity technology: Wired.Data link protocol: Gigabit ethernet.Max transfer distance: 220 m.Network transport protocol: TCP/IP.Dimensions: 2.7"(H) x 3 1/2"(W).Weight: 0.13 lbs..Compliant standards: IEEE 802.1p.Allied Telesis Desktop fiber adapter offers high reliability, detailed tests, diagnostics and analysis. Supports network interface card for enhanced bandwidth and bus efficiency.

The StarTech ST1000SPEXI gigabit Ethernet network card features gigabit Ethernet PCI Express x4 interface card with single RJ-45 port. The RJ-45 port is fully compatible with IEEE 802.3/U/AB standards and offers maximum throughput up to 1000 Mbps auto-negotiation. Advanced features such as jumbo frames, wake-on LAN, auto MDIX and VLAN tagging for optimizing network traffic. Network card is ideal for many business applications requiring upgrades to servers or workstations, adding feature-rich gigabit networking..Gigabit Ethernet network card is suitable for use with PC.Powerline adapter speed: 2000 Mbps.Features 10/100/1000base-T RJ-45 connector.Dimensions: 0.7"H x 2.6"W x 4.7"L.Power consumption: 0.8 W.Meets RoHS, Green compliant certification and standards.PCI Express host interface is for better performance.Form factor: Plug-in card.Supports twisted pair for transmission of both analog and digital signals.Intel I210-AT chipset allows interface card to be compatible with different operating systems.Includes 1-port network card, low profile bracket and instruction manual.Weight: 1.2 oz..Comes with 2 years warranty.The StarTech 2000 Mbps gigabit Ethernet network card is based on Intel I210-AT chipset, that makes it compatible with Windows and Linux operating systems.

The StarTech ST1000SPEX43 4-port PCIe Gigabit network adapter card offers 4-channel networking and a maximum throughput of up to 1000 Mbps in each direction. It features the Realtek RTL8111G chipset for reliable network connections to your server or computer. This adapter supports full-duplex flow control, auto negotiation with next-page capacity, up to 9K jumbo frame, IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding, wake-on-LAN and remote wake-up. It is great for many SMB and enterprise applications such as virtualized environments that require multiple NICs..Network adapter card offers simultaneous access to multiple networks for desktop PC clients, servers and workstations.Dimensions: 0.7"H x 4.7"W x 5.4"D.Comes in yellow color.Interface/ports: one PCI express x four male, four RJ-45 female (external).Data transfer rate: 2000 Mbps (full duplex), Jumbo frame support: 9K max.Chipset ID: Realtek RTL8111G, Industry standards: Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab.Compatibility with Windows 10 (32/64), 8, 8.1, 7, Vista, XP, 2000, ME, 98SE, Windows Server 2012, 2003, Linux Kernel 2.4.x and up operating system.LED indicators: four link and four activity.System and cable requirements: Available PCI Express x4 or higher (x8, x16) slot.Temperature: 0 - 55 deg C (operating), -40 - 70 deg C (storage), Humidity: 5 - 95% RH.Contains one PCIe gigabit network card.Meets CE, FCC and RoHS certifications and standards.Weight: 3.5 oz..Comes with 2 years warranty

The StarTech ST4000SPEXI 2000 Mbps Gigabit Ethernet network card is compatible with Windows 10, 8 / 8.1, 7, Windows Server 2012, 2008 R2, Linux 2.4.x and later OS. It supports twisted pair cable, Linux/PC platform, Intel I350-AM4 chipset, jumbo frames up to 9K. This network card installs easily into a broad range of computer/server chassis, regardless of form factor..Network card helps to add more network ports to a workstation or server for redundancy or virtualization.Offers 20000 Mbps speed for fast, high-bandwidth connectivity.Supports four PCI Express x4 and four RJ-45 ports for good connectivity.Dimensions: 4.7"H x 0.7"W x 5.2"L.Installs easily into a broad range of computer/server chassis, regardless of form factor.Power: 4.4 W.Meets RoHS, FCC, CE compliant certification or standards.Form factor: Plug-in card.Supports twisted pair media type, Linux/PC platform, Intel I350-AM4 chipset, jumbo frames upto 9K.Compatible with Windows 10, 8 / 8.1, 7, Windows Server 2012, 2008 R2, Linux 2.4.x and later OS.LED indicators: 4 x 100/1000 Mbps, 4 x link/activity, Network technology: 10/100/1000Base-T.Environmental conditions: 41 - 122 deg F operating temperature, -4 - 140 deg F storage temperature, 20 - 80% RH humidity.Offers PXE network boot, auto MDIX and negotiation support, wake-on-LAN support, full or low-profile installation and full duplex support.Includes low-profile bracket and instruction manual.Weight: 3.4 oz..Comes with 2 years warranty.The StarTech 2000 Mbps Gigabit Ethernet network card adds more network ports to a workstation or server for redundancy or virtualization.

The Intel 2-port Gigabit Ethernet converged network adapter meet the needs of the next-generation agile data center by providing flexibility for LAN/SAN networking. This low profile adapter offers superior performance up to 80 Gb/s bi-directional throughput. It has Ethernet flow director for hardware based application traffic steering and I/O virtualization innovations for optimum performance. This adapter features excellent small packet performance for network appliances and network function virtualization for reliable performance. It has data plane developer kit for efficient packet processing..Gigabit Ethernet network adapter provides unmatched features for virtualization, flexibility for LAN and SAN networking.Interfaces/ports: PCI Express 3.0 x8, SFP+ slot.Management protocols: Large Send Offload (LSO), packet filtering, PXE support, Quality of Service (QoS), Receive Side Scaling (RSS).Data transfer rate: 10 Gb/s.Dimensions: 2.7"H x 6.6"W.Meets BSMI, C-Tick, Directive 2011/65/EU, FCC Class B, KCC, MSA SFF-8431, RoHS, UL and VCCI certifications or standards.Form factor: Plug-in card.Remote management: RMON, SNMP, Network transport protocol: iSCSI, TCP/IP, UDP/IP.Media type supported: Twinaxial, Device supported: Server.Status indicators: Link/activity, port transmission speed.System requirements: FreeBSD 10, FreeBSD 9, Linux Kernel 2.6.32, Linux Kernel 3.x, Microsoft Windows Server 2008/Server 2008 R2/Server 2008 R2.Operating temperature: 32 - 131 deg F.Comes with lifetime limited warranty

The Allied Telesis™ 2911 Series AT-2911SX/ST-901 1000SX ST PCI Express x1 Gigabit network adapter is compatible with Windows 10/8/7/Vista/XP/Server 2008 R2/Server 2008/Server 2003 64- or 32-bit, Server 2012 R2 64-bit/Server 2012, 64-bit and Linux 2.6. It includes 1000SX/ST connector. It has -17 dBm optical sensitivity, -9.5/-4 dBm optical power output and 850 nm wavelength. It features various status indicators such as LED On for link up, LED Off for link down and blinking for activity indication. It consumes 1.51 to 2.42 W power and requires signaling voltage of 3.3 V. It supports 1000Base-SX network technology..Gigabit network adapter delivers faster, more efficient processing of network traffic.Dimension: 3.5" x 2.7".Bus type: PCIE.Bus width: PCIEx1.Interface type and connectors: 1000SX/ST connector, Optical sensitivity: -17 dBm, Output optical power: -9.5/-4 dBm, Wavelength: 850 nm.Compatible OS: Windows 10/8/7/Vista/XP/Server 2008 R2/Server 2008/Server 2003 64- or 32-bit, Server 2012 R2 64-bit/Server 2012, 64-bit, Linux 2.6.Ethernet: IEEE 802.1p Quality of Service, IEEE 802.1Q VLANs, IEEE 802.2 LLC, IEEE 802.3ac MAC, IEEE 802.3az Energy-Efficient Ethernet.Status indicators: LED On: Link up, Off: Link down, Blinking: Activity.Media type supported: Optical fiber.Number of ports: 1, Power: Power consumption: 1.51 to 2.42 W (varies by model), Signaling voltage: 3.3 V.Network technology: 1000Base-SX.Form factor: Plug-in card.Meets RoHS, UL, FCC/EN55022 Class A, TUV, EN55024, CE, C-TICK, VCCI, IEEE 802.3ae, IEEE 802.3ad, IEEE 802.1Q, IEEE 802.1p certifications and standards.Weight: 0.13 lb

Add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x1 (or higher) slot in an IT Administrator workstation or server backplane, using StarTech this 1-Port SFP network controller. The network controller features an Intel I210 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x 1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps.Has one SFP slot.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I210 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slot for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.2-year manufacturer limited warranty

This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity.The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware.Contains PCI Express, SATA power (15 pin), and RJ-45 (PoE+).Supports the IEEE 802.3af and IEEE 802.3at (Type 1 and Type 2) standards for Power Sourcing Equipment (PSE) and can deliver up to 48V DC and 25.5W of power to compliant Powered Devices (PD).Leverages Intel vPro technology for remote management and troubleshooting capabilities. Improve bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and the streaming of online content.Access up to 2.5GBASE-T speeds using Cat5e (or better) cabling, to maximize existing networks and equipment.Connect Power over Ethernet enabled IP cameras, phones, or Wireless Access Points.Provide power to remote powered devices that require a PoE power source.Add multi-gigabit connectivity to a desktop or server.Compatible with Windows 10, 11; Windows Server 2019, 2022; Linux 5.8.x and up.Box contains: network card, low-profile bracket, quick start guide.2-year manufacturer limited warranty.This card supports the following advanced features: PXE Boot, WoL, VLAN tagging, 9 K jumbo frame, full-duplex, and Intel vPro technology..This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.

StarTech.com® 2 Port network card provides redundant connectivity to ensure an uninterrupted network connection and includes RJ-45 interface. Network card is fully compatible with IEEE 802.3/u/ab standards for 10/100/1000 Mbps auto-negotiation..Network adapter interface: PCI express x 4.Network adapter speed: 2000 Mbps, 1000Mbps.Full duplex capability, wake on LAN, auto-uplink, jumbo frames support, teaming support, large send offload, TCP segmentation offload, tagged VLAN, checksum offload support.Network adapter ports: 2 x RJ-45.Media type supported: Twisted pair.Controller processor: Intel I350-AM2.Network technology: 10/100/1000Base-T.System requirements: Windows 8.1 (32/64bit), 8 (32/64), 7 (32/64), vista(32/64), XP(32/64) Windows Server 2012, 2008 R2, 2003(32/64) Linux 2.4.x/ 2.6.x.Cabling technology: 10/100/1000Base-TX Ethernet.Data link protocols: 10MB LAN, 100MB LAN, Gigabit LAN, network / transport protocols: TCP/IP, UDP/IP.Form factor: Plug-in card, chipset ID: Intel - I350-AM2.Connectivity technology: Wired, Port style: Integrated on card, LED indicators: Link/activity.Compatibility: PC.Dimensions: 4.8"(H) x 0.7"(W) x 2.6"(D).Operating temperature: 32 - 122 deg F, storage: -4 - +140 deg F, humidity: 5 - 85% RH.Cable requirements: Available PCI express x4 or higher (x8, x16) slot, supported protocols: IEEE 802.3ad (link aggregation), IEEE 1588 (time sync) / 802.1AS, IEEE 802.1q (VLAN tagging), auto MDIX and full duplex support.Includes 2-port network card, 1 x low profile bracket, 1 x driver CD, 1 x instruction manual.Complaints and standards: FCC, CE, IEEE 802.1q/AS, IEEE 1588, IEEE 802.3/u/ab/ad, PCI express base specification 2.1, RoHS, green compliance.Weight: 2.8 oz..Warranty: 2 years limited.StarTech.com® 2 Port network card is ideal for VM environments with multiple operating systems, requiring shared or dedicated NICs and supports twisted pair media.

2.5GbE USB A to Ethernet Adapter - NBASE-T NIC - USB 3.0 Type A 2.5 GbE /1 GbE Multi Speed Gigabit Network - USB 3.1 Laptop to RJ45/LAN - Lenovo X1 Carbon, HP EliteBook/ ZBook (US2GA30).COMPATIBILITY: Supports many OS and Hypervisors incl. Windows 7/8.1/10, Windows Server 2008 R2/2012 R2/2016, Linux LTS Kernel 4.19+, MacOS 10.11 to 11.HIGH PERFORMANCE: 2.5GbE USB A to Ethernet Adapter allows you to securely connect to high-speed Networks and is backwards compatible with existing Gigabit LANs.MAXIMUM BANDWIDTH: Leverage NBASE-T w/ USB-A for 2.5 Gb/s speeds over existing Cat 5e Cables w/o the expense of Cat 6A or Fiber; 3 Speed Auto-Negotiation always provides max bandwidth.NBASE-T & 2.5GBASE-T: USB 3.1 Ethernet adapter offers bandwidth for content creators & power users on high performance Laptops/Workstations incl. Lenovo ThinkPad X1 Carbon Dell XPS HP EliteBook/ZBook.USB 3.0/3.1 Type-A | 1x RJ45 | 5 Gbps Multi-Gigabit | 3 Speed 2.5G/1G/100 Mbps auto-negotiation | Realtek RTL8156 | NBASE-T/2.5GBASE-T | 9K Jumbo Frame | WoL | VLAN | USB Powered | 2Yr Warranty.USB LAN Adapter | IEEE 802.3bz | 2.5 Gbps | Mac | Windows® | Linux

This 4-port RJ45 1Gbps OCP 3.0 Network Interface Card (NIC) features an Intel® i350-AM4 Ethernet Controller, enhancing performance and data integrity. The Ethernet card adheres to OCP 3.0 standards and ensures broad compatibility, making it an ideal solution for reliable network connectivity and robust data transfer capabilities. Optimized Network Efficiency Leverage existing Cat5e/Cat6 cabling (or better) up to 100m to maximize existing networks and equipment. The NIC supports variable speed options (10/100/1000 Mbps) with auto-negotiation and 9K jumbo frames to reduce packet overhead, reducing network slowdowns..4-Port RJ45 Gigabit OCP 3.0 Server Network Card, 1 Gbps.Maximum Data Transfer Rate 1Gbps.Number of ports 4.OS Compatibility Windows Server 2012, 2012 R2, 2016, 2019, 2022, 11, 10 VMware ESXi 7.x Linux 2.4.x and up - LTS Versions only.Chipset Model I350-AM4.Media Type Supported Twisted Pair.Form Factor: Plug-in Card.Limited Warranty 2 Year

The AT-2911 Series Gigabit Ethernet Network Adapters are integrated Ethernet network interface cards based on Broadcom's BCM5718 chipset with a PCI Express (PCIe) x1 version 2 interface. The AT-2911 series adapter connects a PCIe compliant computer to a Gigabit Ethernet network. Allied Telesis offers models equipped with a single port interface or dual port interface in the AT-2911 series. The AT-2911 adapter is equipped with single or dual fiber optic connector, copper connector, SFP slot, or a combination of these connectors..This Gigabit Ethernet card guarantees a replacement networking interface to client, server or workstation.Enjoy superfast data transfer of up to 250 MB/s with PCI Express x1 card, between the network card and motherboards.With the 1000Base-X technology get up to 1000Mbps data transfer rate over the supported network cable

This quad-port 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity across four 2.5G ethernet connections. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..Network controller to add a up to four 2.5GbE ports to a PCI Express (PCIe) 2.0 (or higher) slot in your workstation.Has a four RJ-45 ports.Compatible with Windows, Windows Server, VMware, and Linux systems.Meets or exceeds WEEE standards.Leverages Intel vPro technology for remote management and troubleshooting capabilities.Intel I225-V chipset allows for improved bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and streaming of online content, while reducing network slowdowns.Card ships in a standard-profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty

Add up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in an IT Administrator workstation or server backplane, using this 2-Port SFP Network Controller. The network controller features an Intel I350 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel® VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps per port.Has two SFP slots.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I310 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slots for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty

StarTech.com® PCI Express gigabit ethernet fiber network card has a dual profile design and includes low profile/half height bracket for easy installation. Card is compatible with Windows 8, 8.1, 7, Vista, XP, Mac OS 10.5, Linux 2.6.x and 3.5.0 OS..1x PCI express x1, 1x SFP slot female.4.6"(H) x 0.7"(W) x 5"(D).Windows 8/8.1 (32/64bit)/7 (32/64)/Vista (32/64)/XP (32/64), Windows Server 2012/2008 R2/2003, Mac OS 10.5 and up (Tested up to 10.9), Linux 2.4.x/2.6.x/3.5.0, Microsoft Hyper-V operating systems.Wired.Data transfer rate: 2 Gbps (full-duplex).Form factor: Plug-in card.Buffer size: 48KB.Power consumption: 3.2 W max.Chipset ID: Realtek RTL8168E, Marvell 88E1111B.LED indicators: Link (green), activity (yellow).Temperature: 0 - 45 deg C operating, -20 - 70 deg C storage, Humidity: 5 - 95% RH (non-condensing).Applications: Ideal for secure setups, perfect for remote embedded industrial monitoring systems, and high-speed video surveillance.Compatible with most Gigabit SFP modules.Supports full/half-duplex auto-negotiation, auto-MDI/MDIX.No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.Includes 1 Port PCI Express Gigabit SFP network card, low-profile bracket, driver CD, instruction manual.Certification and standards: CE, FCC, RoHS.Weight: 2 oz..Warranty: 2 years limited.StarTech.com® PCI Express gigabit ethernet fiber network card supports maximum data transfer rate of 2 Gb/s at full duplex mode and has a SFP female slot to ensure flexible network configuration.

Intel I350-T2 chipset supports reliable and advanced network connectivity Compliant with IEEE 802.3, 802.3u, 802.3ab with full duplex and Wake-on-LAN support..Type of Product/Use: Gigabit Ethernet Card for Server.Adapter Speed: Gigabit Ethernet.Number of ports and Type:2 RJ-45.Dimensions as H x W x D in inches: 0.79" x 5.43" x 4.72".Installation Info: Plug-in Card.Warranty: 1 Year.Features innovative power management including Energy Efficient Ethernet (EEE) and DMA Coalescing to increase efficiency and reduce power consumption.Fits both standard and low profile system chassis with the included spare low profile bracket.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Quickly adds two independent Gigabit Ethernet ports through an available PCI Express slot to server or desktop systems

This dual-port 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity across two 2.5G ethernet connections. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..Network controller to add a up to two 2.5GbE ports to a PCI Express (PCIe) 2.0 (or higher) slot in your workstation.Has a two RJ-45 ports.Compatible with Windows, Windows Server, VMware, and Linux systems.Meets or exceeds WEEE standards.Leverages Intel vPro technology for remote management and troubleshooting capabilities.Intel I225-V chipset allows for improved bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and streaming of online content, while reducing network slowdowns.Card ships in a standard-profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty

Running low on expansion slots? Merge USB 3.0 and GbE into a single PCIe combo card - 3 Port PCI Express USB 3.0 Card + Gigabit Ethernet - Installation flexibility to fit standard & low-profile PCs - Frees up a PCIe slot by consolidating 3x USB 3.0 & 1x Gigabit Ethernet into a single card - UASP Support - Optional SATA Power - Save money and connect existing devices with USB 2.0 and 1.x backward compatibility - USB 3 with Network Adapter Card.Frees up a PCIe slot by consolidating 3x USB 3.0 & 1x Gigabit Ethernet ports into a single card.Provides installation flexability for standard and low-profile computers, with a dual-profile design.Lets you save money and connect your existing devices with USB 2.0 and 1.x backward compatibility.Perfect for high-powered USB devices, with optional SATA power providing up to 900mA per port.PCIe x1 interface, compliant with PCI Express 2.0 specifications.Supports Wake-On-LAN, Energy-Efficient Ethernet, jumbo frames, full duplex flow control, VLAN tagging, and layer 2 priority encoding

StarTech.com® Gigabit network server adapter NIC card features PCI Express x1 interface and offers network speed of up to 1000 Mbps. Card with link/activity LED indicators supports jumbo frames, wake-on-LAN and auto MDIx features..1 x Network.Twisted Pair.Full-height, Low-profile.Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x and IEEE 802.3ab standards.Processor: 1 x RTL8111E - Realtek semiconductor.Platform supported: PC, Mac.Server adapter offers performance flexibility and easy setup with support for advanced features such as Jumbo Frames, Wake-On-LAN and Auto MDIX.Includes both full profile and low profile/half-height installation brackets for installation in a wide range of computer/server chassis, regardless of form factor.Connectivity technology: Wired.Operating systems: Windows 2000/ XP (32/64-bit)/ Server 2003 (32/64-bit)/ Server 2008 R2/ Vista (32/64-bit)/ 7 (32/64-bit)/ 8 (32/64-bit)Mac OS X (Intel based, tested up to 10.8), Linux.Operating humidity: 10 percent ... to 90 percent ... RH.Operating Temperature: 0 to 70 deg C.Supported protocols: CSMA/CD.Network technology: 10/100/1000Base-T.Form factor: Plug-in card.Green compliance: RoHs.Dimensions: 2.7"(H) x 4.7"(W) x 0.7"(D); Weight: 1.4 oz..Warranty: 2 years limited.Startech.Com® ST1000SPEX2 Gigabit Network Server Adapter NIC Card offers performance flexibility and easy setup with support for advanced features such as Jumbo Frames, Wake-On-LAN and Auto MDIX.

The Intel Ethernet Network Adapter I226-T1 is ideally suited for personal computers and workstations used for enterprise, gaming, and home networks. These systems require more bandwidth than ever before. This ultra-compact, easy-to-integrate PCIe 3.1 x1 adapter, is a cost-effective networking solution for speeds up to 2.5GbE. The I226-T1 is also designed with a ventilated bracket, for increased efficiency and reduced power consumption..Ethernet Network Adapter.Maximum Data Transfer Rate: 2.50 Gbit/s.Network Technology: 2.5GBase-T.Form Factor: Plug-in Card.Bracket Height: Low Profile and Full Height.Device Supported: Computer/Workstation.Chipset Model: I226-LM.Host Interface: PCI Express 3.1 x1.Number of Network (RJ-45) Ports: 1

Plug this handy Ethernet adapter into a laptop to access a wired network at home or in the office. This compact NIC supports 1000 Mbps Ethernet while allowing the continued use of a pass-through USB 3.0 port at speeds of up to 5 Gbps. Featuring USB 2.0 backwards compatibility and offload engine support, this StarTech USB 3.0 to Gigabit Ethernet adapter is well suited to multigenerational setups and shared work spaces..USB 3.0 to Gigabit Ethernet adapter NIC with USB pass-through port.Network adapter speed: 2Gbps.USB 3.0, RJ45.Dimensions: 0.7"H x 1.4"W x 5"D.USB-powered.Meets or exceeds RoHS, CE, FCC, WEEE standards.Ideal replacement LAN adapter or laptop accessory, this compact USB 3.0 NIC leverages the 5Gbps speed of USB 3.0 to provide full Gigabit bandwidth.2-year manufacturer limited warranty.Max distance : 330', Enclosure type: Plastic.LED indicators: 1 x 10/100 Link/Activity (Green), 1 x Gigabit Link/Activity (Amber), Power adapter included: USB powered.Full Gigabit bandwidth support through a USB 3.0 host connection, conserve available USB 3.0 ports with USB pass through, take the adapter anywhere with a portable, USB powered design.Environmental: Humidity: 5 approx85% RH, Operating temperature 0 to 50 deg C (32 to 122 deg F), Storage temperature: -20 to 60 deg C (-4 to 140 deg F).System and cable requirements: USB port.OS compatibility: Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), Windows® Server 2008 R2, 2003(32/64), Mac OS 10.6 - 10.8, Linux Kernel 2.6.14 - 3.5.0.Includes 1 x USB 3.0 Network Adapter, 1 x Driver CD, 1 x Instruction Manual.Platform supported: PC, Mac.Certifications & standards: CE, FCC, IEEE Standards: 802.3i, 802.3u, 802.3ab, 802.3az.Dimensions: 0.7"(H) x 1.4"(W) x 3.2"(D), Weight : 1.80 lbs..Warranty: 2 years limited.Enjoy lightning-fast networking with this StarTech USB 3.0 to Gigabit Ethernet adapter NIC.

This 2.5GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..One-port 2.5Gbps NBASE-T PCIe network card with Intel I225-V chip.Provides Ethernet speeds up to 2.5Gbps.Has a one RJ-45 port.OS compatibility: Windows 10, 11, Windows Server 2019, 2022, Linux 5.8.x and up (LTS versions only), and VMware ESXi 7.0.Meets or exceeds the RoHS, and WEEE standards.The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities.The card ships in a standard profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.LAN card features built-in heat sink to keep the controller chip cool for optimal performance.Includes PCIe network card, low-profile bracket, and quick-start guide.2-year manufacturer limited warranty

This 2.5GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..One-port 2.5Gbps NBASE-T PCIe network card with Intel I225-V chip.Provides Ethernet speeds up to 2.5Gbps.Has a one RJ-45 port.OS compatibility: Windows 10, 11, Windows Server 2019, 2022, Linux 5.8.x and up (LTS versions only), and VMware ESXi 7.0.Meets or exceeds the RoHS, and WEEE standards.The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities.The card ships in a standard profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.LAN card features built-in heat sink to keep the controller chip cool for optimal performance.Includes PCIe network card, low-profile bracket, and quick-start guide.2-year manufacturer limited warranty

Startech Gigabit Ethernet adapter in white color offers backward compatibility with USB 2.0 systems & support through a USB 3.0 host connection. Card features such as IPv4/IPv6 packet COE & TCP large send offload to reduce the load on your CPU..White.Network adapter interface: USB 3.0, RJ45.Network adapter speed: 5 Gbps, 2 Gbps.Compatible networks: 10/100/1000 Mbps.Chipset ID: ASIX - AX88179, VIA - VL811.Connector type: 1 x RJ-45 female, 1 x USB 3.0 A (9 pin; SuperSpeed) female, 1 x USB 3.0 A (9 pin; SuperSpeed) male.Performance: Auto MDIX: Yes, Compatible networks: 10/100/1000 Mbps, full duplex support.Industry standards: IEEE802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3az.Max distance : 330', Enclosure type: Plastic.LED indicators: 1 x 10/100 Link/Activity (Green), 1 x Gigabit Link/Activity (Amber), Power adapter included: USB powered.Full Gigabit bandwidth support through a USB 3.0 host connection, conserve available USB 3.0 ports with USB pass through, take the adapter anywhere with a portable, USB powered design.Environmental: Humidity: 5 approx 85% RH, Operating temperature 0 to 50 deg C (32 to 122 deg F), Storage temperature: -20 to 60 deg C (-4 to 140 deg F).System and cable requirements: USB port.OS compatibility: Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), Windows® Server 2008 R2, 2003(32/64), Mac OS 10.6 - 10.8, Linux Kernel 2.6.14 - 3.5.0.Includes 1 x USB 3.0 Network Adapter, 1 x Driver CD, 1 x Instruction Manual.Platform supported: PC, Mac.Certifications & standards: CE, FCC, IEEE Standards: 802.3i, 802.3u, 802.3ab, 802.3az.Dimensions: 0.7"(H) x 1.4"(W) x 3.2"(D), Weight : 1.80 lbs..Warranty: 2 years limited.Startech Gigabit Ethernet adapter in white color operates at maximum distance of 100 m / 330' and cable is of 6 1/10" in length.

This StarTech five-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer. The USB 3.2 card offers a USB Type-C port (10Gbps), two traditional USB Type-A ports (10Gbps), and a motherboard header (USB 5Gbps). By offering a range of USB port types, you can easily connect a variety of modern and legacy USB devices, both inside and outside your computer. Because the card offers a 10Gbps USB ports, you can save time and avoid the performance bottlenecks that are often associated with other connectivity technologies..This five-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer.PCI Express combo card leverages the performance potential of USB 3.2 Gen 2x1 (10Gbps) to help you work faster.Contains a USB Type-C port (10Gbps), two traditional USB Type-A ports (10Gbps), and a motherboard header (USB 5Gbps).Dimensions: 0.6"H x 4"W x 2.7"D.Lets you bridge the gap between devices that use different connectors; you can simultaneously connect and access USB Type-A and USB Type-C devices, while using only a single PCI Express expansion slot.By adding three types of USB ports in one combo card, you can free up space in your PC case, and eliminate the nuisance of having different cards for different USB devices.With two internal motherboard-style headers, this dynamic USB 3.1 card is perfect for upgrading or building your own computer.Backward compatible with legacy USB 3.0, 2.0 and 1.1 devices, so you can eliminate the added expense and aggravation of purchasing new devices.Great for file backups, video editing, and data recovery, using high-bandwidth USB 3.1 Gen 2 external storage solutions.2-year manufacturer limited warranty

1-Port 2.5GbE M.2 2280 Network Card, Multi-Gigabit Speeds (2.5G/1G/100M/10M), NBASE-T (802.3bz) NIC, M.2 B+M Key, PCIe Ethernet Interface, For SFF/Desktop PCs.High-performance M.2 Ethernet 2.5Gbps network card with Intel I225-V-chip; Multi-gigabit; Leverage existing Cat5e/Cat6 cabling (or better); NBASE-T (802.3bz); PCI Express M2 2280 B or M key compatible.M.2 2280 form factor is ideal for upgrading systems that do not have PCIe expansion slots or where slots are already in use; Includes 2ft (60cm) M/F Cat6 cable adapter for running Ethernet port to full/low-profile bracket on the rear of the PC.2.5GBASE-T variable speed options (2.5/1Gbps and 100/10Mbps) with auto-negotiation; Supports B or M key M.2 PCIe Gen 2 slots; Network interface card for PC is compatible with Windows/VMware/Linux; Full and low profile bracket included.Intel vPro® for remote management and troubleshooting; PXE boot enabled for faster deployment/updates; 9K jumbo frame for reduced packet overhead; Remotely boot a system using WoL; VLAN support for efficient network management.Designed and built for IT Professionals, this 2.5 GbE M.2 NIC is backed for two years, including free lifetime 24/5 multi-lingual technical assistance.This Ethernet card supports the following advanced features: PXE Boot, Wake-on-Lan (WoL), VLAN tagging, 9K jumbo frame, half-duplex, auto-negotiation, and Error Correcting Memory (ECC) for optimal network functionality..This 2.5 GbE M.2 Network Interface Card (NIC) features an Intel I225-V chipset with Intel vPro® technology, for enhanced performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support of new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding 2.5GBASE-T (802.3bz) compatibility for seamless integration.

The StarTech USB 3.0 to Gigabit network adapter offers fast, reliable network access for your MacBook, Chromebook or tablet. It supports Windows, Mac and Chrome OS and feature sleek aluminum design with silver finish. You can quickly access very large files over a Gigabit network, saving valuable time every day. The Realtek RTL8153 chipset ensures reliable performance and offers up to 9K jumbo frame support. This USB31000SA network adapter adds a single RJ45 Ethernet port to your computer through your USB 3.0 port..Gigabit network adapter is perfect for office or home use.Dimensions: 0.7 degree H x 1 degree W x 2.6 degree D.Compatible with PC.Aluminum housing with silver finish, the network adapter is the perfect companion for your MacBook, Chromebook or Tablet.System requirements: Windows 10/8.1/8/7/Vista/XP, 98SE, Server 2012, 2008 R2, Mac 10.6 - 10.11, Linux Kernel 2.6.25 - 3.17.0, Google Chrome , PC.Has one 9-pin Type A male USB 3.0, one female RJ-45 connector.Chipset ID: Realtek RTL8153, Network technology: 10/100/1000 Mbps, Jumbo frame support: 9K max., Max. distance: 330'.Maximum data transfer rate: 2 Gbps, Full duplex support, Auto MDIX, Form factor: Attached cable/desktop.LED indicators: 1 x power - blue, 1 x link - green, 1 x activity - amber.USB 3.0 to Gigabit network adapter provides a single RJ45 Ethernet port to computer through USB 3.0 port.Network adapter supports full Gigabit bandwidth by harnessing the performance of 5 Gbps speed USB 3.0.Access large files over a Gigabit network, saving valuable time every day, realtek chipset gives the assurance of reliable performance.Network adapter chipset offers native driver support, so you don't have to worry about installing additional software.Temperature: 0 to 70 deg C operating, -55 to 125 deg C storage, Humidity: 20 to 90%.Contains one USB 3.0 Gigabit NIC, one quick install guide.Meets CE, FCC, RoHS, C-Tick certifications and standards.Weight: 1.3 oz..Comes with 2 years warranty

The APC AP9640 UPS network management card 3 is designed for a remote monitoring and control of an individual UPS by connecting it directly to the network. Compatible with Smart-UPS, this management card supports reporting UPS information to Building Management Systems or other third party management systems via BACnet/IP (Single Phase Smart-UPS only). Command line interface support offers simultaneous remote management access through Telnet and SSH. Micro-USB based console support allows for faster and easier troubleshooting and configuration. This card supports simultaneous web browser access for up to 8 users and network command line interface access for up to 3 users. The ability to reboot equipment remotely saves dispatching technicians to remote locations. Real-time event notification minimizes response times to critical physical infrastructure situations. Enables IT Administrators to reduce mean time to repair, improve efficiency, and maximize uptime..Network management card for a remote monitoring and control of an individual UPS by connecting it directly to the network.Supports faster communication at 1Gbps over network.Features one Ethernet port.Dimensions: 1.5"H x 4.76"W x 4.49"D.Meets or exceeds AS/NZS 3548 (C-Tick) class A, EN 55022 class A, EN 55024, FCC part 15 class A, GOST, ICES-003, VCCI class A, and RoHS standards.Securely connect via HTTPS/SSL, SSH (up to 2048-bit encryption), SNMPv3.Compatible with Smart-UPS.Offers simultaneous remote management access through Telnet and SSH.Supports reporting UPS information to building management systems or other third-party management systems via BACnet/IP (BTL certified) (Single-Phase Smart-UPS only).Capable of operating on a network using IPv6 protocol.Micro-USB based console support allows for faster and easier troubleshooting and configuration.Ability to reboot equipment remotely saves dispatching technicians to remote locations.Multitier user access supports up to four access levels: administrator, device user, read-only user, and network-only user; with username and password requirements.Supports Secure Boot with Root of Trust for enhanced security.Package contents: network management card, USB cable, and user manual.Operating temperature: 32 to 113 degrees Fahrenheit; operating humidity: 0 to 95%.2-year manufacturer limited warranty

10GBase-T PCIe Network Adapter with backward compatibility of 5/2.5/1G and 100Mbps; RJ45 port and built-in QoS Hyper-fast 10Gbps Networking - Enjoy up to 10X-faster data-transfer speeds for bandwidth-demanding tasks. Complete Compatibility - XG-C100C is compatible with current network standards, including 10/5/2.5/1Gbps and 100Mbps, for seamless backward compatibility. Compatible with Windows and Linux - Supports Windows 10 and Linux Kernel 4.4 for flexible OS integration. RJ45 Port for Easy Migration - Easily upgrade to 10Gbps networking using standard copper network cables. Prioritize Your Games - Built-in Quality-of-Service (QoS) technology lets you prioritize bandwidth and supported gaming packets for a smooth gaming experience..10Gigabit Ethernet card offers the flexibility and scalability to make infrastructure run as efficiently and productively as possible with 10Gigabit data transfer rate.Enjoy superfast data transfer of up to 2000 MB/s with PCI Express x4 card, between the network card and motherboards.This single port 10gigabit ethernet card enables you to connect your computer system to your existing network.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The Base-T Ethernet PCI-Express Network Interface Card from Dell is ideal for connecting your server to your network. The Base-T Quad Port Server Adapter proven to be reliable and standards-based solutions. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system.Quad-port Ethernet network adapter with a PCI-Express interface that supports Gigabit and 10 Gigabit speeds.Delivers a maximum data transfer rate of 10,000 Mbps per port.Features four RJ-45 Ethernet ports for high-speed connectivity.Compatible with a wide range of Dell PowerEdge servers including models like R660, R760, R860, R960, C6620, HS5610, HS5620, and XR7620

Startech Gigabit Ethernet card includes a standard profile bracket for installation in a wide range of computer/server chassis, regardless of form factor. Card adds a 10/100/1000 Mbps which is compatible with RJ45 Ethernet port..Network adapter interface: RJ45, 1 x AC power plug.Network adapter speed: 1000 Mbps.Compatible networks: 10/100/1000 Mbps.Card type: Low profile, Chipset ID: Realtek RTL8111E, Auto MDIX, full duplex support, Supported protocols: CSMA/CD.Connector type: 1 x PCI Express x1, Bus type: PCI Express, External ports: 1 x RJ-45.Optimize network traffic with support for advanced features such as Jumbo Frames and VLAN tagging.Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab.Saves the time of having to adjust the mounting bracket, with a pre-configured half-height/low-profile bracket.LED indicators: 1 x Gigabit Detect (Yellow), 1 x Link/Activity (Green).Versatile Gigabit NIC/Server Adapter offers effective network performance.Environmental: Humidity 10% approx. 90% RH, Operating temperature: 0 to 70 deg C (32 to 158 deg F), Storage temperature: 0 to 100 deg C (32 to 212 deg F).System and cable requirements: Available PCI Express expansion card slot.OS Compatibility: Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, Windows® Server 2008 R2, 2003(32/64), Mac OS X (Intel based, tested up to 10.8), Linux, Physical Characteristics.Includes 1 x Gigabit Ethernet PCI Express Card, 1 x Standard Profile Bracket, 1 x Driver CD, 1 x Instruction Manual.Platform supported: PC.Warranty: 2 years limited.Startech Gigabit Ethernet card comes pre-configured with a low-profile/half-height installation bracket and has thickness of 700 mil.

This StarTech four-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer. The USB 3.2 card offers two USB Type-C port (10Gbps), and two traditional USB Type-A ports (10Gbps). By offering two different USB port types, you can easily connect a variety of USB devices to your desktop computer. Because the card offers 10Gbps USB ports, you can save time and avoid the performance bottlenecks that are often associated with other connectivity technologies..This four-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer.The USB ports offer a data throughput of up to 10Gbps, so you can spend less time waiting for file transfers to complete or for access to your external peripherals.Contains two external USB-C port (USB 10Gbps), two external USB-A ports (USB 10Gbps).Dimensions: 0.9"H x 3.3"W x 4.4"D.Lets you bridge the gap between devices that use different connectors; you can simultaneously connect and access USB Type-A and USB Type-C devices, while using only a single PCI Express expansion slot.By adding two types of USB ports in one combo card, you can free up space in your PC case, and eliminate the nuisance of having different cards for different USB devices.Backward compatible with legacy USB 3.0, 2.0 and 1.1 devices, so you can eliminate the added expense and aggravation of purchasing new devices.USB PCIe expansion card with SATA power supplies supplemental power to the USB ports (when motherboard power is insufficient) providing up to 5V 3A/15W per USB Type-C port & 5V 0.9A/4.5W per USB Type-A port.Installs in full-profile PCIe 3.0 (x4 slot) desktop/server; lower performance with PCI-e 2.0; Windows/Linux/macOS auto driver install (Windows 8 and up).2-year manufacturer limited warranty

This compact USB 3.0.0 network adapter is backward compatible with older USB 2.0.0/1.x computer systems, making it the ideal portable replacement network adapter. Adapter supports features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL)..1.Twisted Pair.Crossover detection and auto-correction (Auto MDIX).IEEE 802.3, 802.3u and 802.3ab (10BASE-T, 100BASE-TX, and 1000BASE-T) compatible.IEEE 802.1Q VLAN tagging support.Platform supported: PC, Mac.Supports checksum offload (IPv4, IPv6, TCP, UDP) and large send offload.Compact, lightweight design.Jumbo frame support.Activity and link LED indicators.Connectivity technology: Wired.Operating systems: Windows XP(32/64-bit)/ Server 2003(32/64-bit)/ Server 2008 R2/ Vista(32/64-bit)/ 7(32/64-bit)/ 8(32/64-bit)Mac OS 10.6/ 10.7/ 10.8.Humidity: < 80 percent ... RH.Operating Temperature: 0 to 40 deg C.USB -powered.Network technology: 10/100/1000Base-T.Form factor: External.Green compliance: RoHs.Dimensions: 0.6"(H) x 1"(W) x 8.3"(D); Weight: 1 oz.Warranty: 2 years limited.Startech.Com® USB31000SW White NIC Network Adapter Card adds a single RJ45 ethernet port to a USB-enabled computer system.

The Dell 540-BCOY Dual Port Marvell FastLinQ 41232 10/25GbE SFP28 OCP Network Interface Card is a high-performance network adapter designed for use in server environments. It provides two 10/25 Gigabit Ethernet ports that enable users to connect to high-speed networks with ease. This network adapter provides high-speed connectivity that enables users to transfer large amounts of data quickly and efficiently. The adapter supports speeds of up to 10/25 Gigabits per second, providing users with the bandwidth they need to support data-intensive applications and workloads..Gigabit Ethernet network adapter uses the OCP NIC 3.0 interface.Offers a maximum data transfer rate of 25,000 Mbps.Features two high-speed Ethernet ports for dual connectivity.Compatible with a wide range of Dell PowerEdge servers that support the OCP NIC 3.0 interface, including models like R650, R750, C6520, and T550

Startech.com® PCI Express gigabit Ethernet multimode SC fiber network card includes low profile and half height installation brackets for secure attachment. Network card is compatible with Windows 7/8/8.1/ XP/Vista, Linux and Mac OS..Plug-in card.Dimensions: 4.6"(H) x 0.7"(W) x 4.7"(L).Interface/port: External ports: 1 x Fiber optic SC duplex female, Host interface: PCI-express x 1 Male.Software requirement: OS compatibility: Windows 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64), Windows Server 2012, 2008 R2, 2003, Mac OS 10.5 and up (tested up to 10.9), Linux 2.4.x/2.6.x/3.5.0, Microsoft Hyper-V.Card type: Standard profile (LP bracket incl.).Data transfer rate: 2000 Mbps (2 Gbps) full-duplex, Buffer size: 48 KB.Compatibility: PC, UART type: 16C550.Network technology: 1000Base-X.Compatible networks: 1000 Mbps, SC port type: Duplex.Operating temperature range: 0 - 45 deg C, Storage temperature: -20 - 70 deg C, Humidity: 5 - 95% RH (non-condensing).LED indicators: 1 - link (green), 1 - activity (yellow).Power consumption: 3.2W Max.Includes: 1 x port PCI-express gigabit fiber network card, 1 x Low profile bracket, 1 x Driver CD, 1 x Instruction manual.Certification and standards:: RoHS, CE, FCC, IEEE standards: 802.3z, 802.1Q, 802.1P, 802.3x.Weight: 2.3 lbs..Warranty: 2 years limited.Startech.com® PCI Express gigabit Ethernet multimode SC fiber network card supports a maximum data transfer rate of up to 2000 Mbps and is ideal for high speed video surveillance.

Tripp Lite's USB 3.1 Type-C to Gigabit Ethernet NIC Network Adapter allows USB-C computers, notebooks and smartphones without a network interface controller to connect to a network or the Internet using an Ethernet cable. It's a more convenient and less eXPensive way to connect to the network than opening your device and installing an internal Ethernet card. The white adapter is compact and lightweight for easy carrying in your notebook bag..Connects USB™-C port on computer, notebook or smartphone to a wired Ethernet network.Accesses true gigabit network speed without the eXPense & hassle of adding an internal Ethernet card to a device.Supports full 10/100/1,000Mbps network speeds.Twisted Pair.Meets RoHS, 802.3, 802.3u, USB 1.1, USB 2.0, 3.0, 3.1 certifications and standards.Network technology: 10/100/1000Base-T.Data transfer rate: 1 Gbps, Connectivity: Wired.Comes in white color, Dimensions: 6.6 cm H x 2.27 cm W x 1.52 cm D.Suitable to use with Computer/notebook/tablet.Plug-and-play engineering requires no drivers or external power supply necessary.Compact and lightweight design offers easy carrying in your laptop bag.Sustains full 10/100/1000 Mbps network speeds for fast data transfer, fumble-free reversible plug ensures fast, easy connection every time.Contains quick start guide.Weight: 0.03 kg.Comes with 1 year limited warranty

2.5GbE USB C to Ethernet Adapter NBASE-T NIC - USB 3.0 Type C 2.5/1 Gigabit/100 Mbps Multi Speed Network/ USB 3.1 Laptop to RJ45/LAN Thunderbolt 3 Compatible/MacBook Pro Surface (US2GC30).COMPATIBILITY: Supports many OS and Hypervisors incl. Windows 7/8.1/10, Windows Server 2008 R2/2012 R2/2016, Linux LTS Kernel 4.19+, MacOS 10.11 to 11.HIGH PERFORMANCE: 2.5GbE USB C to Ethernet Adapter/ USB Type C/Thunderbolt 3 Network Adapter allows you to securely connect to high-speed Networks & is backwards compatible with existing Gigabit LANs.IDEAL FOR CONTENT CREATORS: USB 3.0 NIC provides bandwidth to power users on high performance laptops/workstations incl Mac Pro, MacBook Pro, Surface Book, HP ZBook, Dell Precision, Lenovo P Series.MAXIMUM BANDWIDTH: Leverage NBASE-T for 2.5 Gbps speeds over existing Cat 5e Cables w/o the expense of Cat 6A or Fiber; 3 speed Auto-Negotiation always provides max bandwidth.TECH SPECS: USB-C 3.1/3.0 or TB3 | 1x RJ45 | 2.5Gbps Multi-Gigabit | 3 speed 2.5G/1G/100 Mbps Auto-negotiation | Realtek RTL8156 | NBASE-T & 2.5GBASE-T | 9K Jumbo frame | WoL | VLAN | USB Bus Powered.USB LAN Adapter | IEEE 802.3bz | 2.5 Gbps | Mac | Windows® | Linux

Control connected electronics from anywhere using your tablet or smartphone with the TP-LINK KP125 smart plug mini. Turn devices on and off, create schedules, and set timers using the Kasa Smart app. Use Away Mode to make it look like you're home when you're not. Pair with Amazon Alexa, Apple HomeKit, or Google Assistant to enable voice control. Enjoy peace of mind by checking on your devices remotely and always coming home to a well-lit house. Manage and control your connected devices with the Kasa Smart app..Smart Wi-Fi plug helps control connected electronics from anywhere using your tablet or smartphone.Pair with Amazon Alexa, Apple HomeKit, or Google Assistant to control with your voice.Dimensions (with plug): 1.5"H x 2.62"W x 2.39"D.Turn electronics on/off from anywhere with mobile devices using the Kasa Smart app.Create on/off schedules, timers, and countdowns, or set to work around dawn and dusk.Check to see if connected devices are on/off from anywhere for peace of mind.Switch lights on/off at different times with Away Mode to make it seem like you are home.Connects to your home's Wi-Fi network, no hub or accessories required.Kasa Smart app will guide you through the setup process and connect to your home Wi-Fi.Use Smart Action via the Kasa Smart app, to seamlessly control all connected Kasa devices.Meets or exceeds FCC and UL standards.Humidity: < 80 percent ... RH.Operating Temperature: 0 to 40 deg C.Powered directly from the USB ports.Network technology: 10/100/1000Base-T.Form factor: External.Green compliance: RoHs.Dimensions: 0.6"(H) x 1"(W) x 2.6"(D); Weight: 1 oz.Warranty: 2 years limited.Startech.Com® USB31000S Gigabit Ethernet NIC Network Adapter Card adds a single RJ45 ethernet port to a USB-enabled computer system.

The Dell network interface card offers a robust solution for businesses seeking high-speed and reliable connectivity for their server infrastructure. Designed to integrate seamlessly with a range of systems, including Dell's PowerEdge series such as the R6515 and R760, this component ensures compatibility with your existing hardware. Its wired connectivity, utilizing a PCI Express host interface, provides a stable and efficient data transfer rate up to 10 Gbps, making it ideal for demanding enterprise applications and data-intensive operations. This full-height PCI card incorporates four fiber ports utilizing SFP28 connectors, facilitating optimal network performance and scalability. By leveraging advanced fiber optic technology, it supports efficient and high-speed data transmission, which is crucial for maintaining operational efficiency in data centers and enterprise environments. The card's internal design allows for streamlined integration within server setups, minimizing downtime during deployment and enhancing overall system reliability..Ethernet network adapter with a PCIe interface, and it supports Gigabit Ethernet connectivity.Supports a maximum data transfer rate of 10,000 Mbps (10Gbps) per port.Features 4 Ethernet ports for high-speed wired connectivity.Compatible with a wide range of Dell PowerEdge servers, including models like R660, R760, R860, R960, T360, XR5610, and XR7620, and supports operating systems such as Windows Server and various Linux distributions

StarTech.com® Server network adapter card features two RJ-45 female Ethernet ports and offers full duplex support. Card offers a data transfer rate of 2000 Mbps for full-duplex transmission and 1000 Mbps for half-duplex transmission..Dimensions: 4.7"(H) x 0.7"(W) x 3.6"(L).Chipset ID: Realtek - RTL8111E, Asmedia - ASM1182E.Host interface: PCI-Express x1, Network technology: 10/100/1000Base-T- Gigabit Ethernet, Maximum data transfer rate: 2000 Mbps (full-duplex), 1000 Mbps (half-duplex).Interface/ports: 2 x RJ-45 network, Connector type: 1x PCI-Express x1 male.Form factor: Plug-in card.Device supported: Server.Performance: Auto MDIX, full-duplex support, Jumbo frame support: 9K max.Supported protocols: IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding and IEEE 802.3x full-duplex flow control.Card type: Standard Profile (LP bracket included), Port style: Integrated on card, Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, PCI express base specification 2.0.Optional low-profile/half-height bracket that can be used for installation into a standard or small form-factor computer chassis.Indicators: LED: 2 - Green - Link/Activity, 2 - Yellow - Gigabit Mode.Software: OS Compatibility: Windows® 8.1 / 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000 Windows® Server 2012, 2008 R2, 2003(32/64), Mac OS 10.4 and up, Linux 2.4.x and up.System and cable requirements: Available PCI-Express slot.Environmental: Temperature: Operating: 0 deg C to 70 deg C (32 deg F to 158 deg F), Storage: 0 deg C to 100 deg C (32 deg F to 212 deg F), Humidity: 10 approx. 90% RH.Includes 1 x PCIe network card, 1 x low-profile bracket, 1 x driver CD, 1 x instruction manual.Weight: 1.8 oz..Warranty: 2 years limited.StarTech.com® Server network adapter card contains two Ethernet ports and has a PCI express slot that allows you to connect it to client, server or a workstation.

The Ethernet PCI-Express Network Interface Card from Dell is ideal for connecting your server to your network. The Dual Port Server Adapter proven to be reliable and standards-based solutions. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system..Dual-port Ethernet network adapter with an OCP 3.0 interface that supports 10/25 Gigabit Ethernet connectivity.Supports a maximum data transfer rate of up to 25,000 Mbps.Features two high-speed Ethernet ports.Compatible with Dell PowerEdge servers that support the OCP 3.0 interface, including models like R650, R750, R760, C6520, C6620, T550, T560, XE8640, XE9680, XR5610, and XR7620

With Gen10 Plus ProLiant Servers, HPE offers the industry's most secure server platform. Through its Root of Trust server design down to the Network Interface Card (NIC), these security features are built-in so you can deploy with confidence. HPE Gen10 Plus servers will help prevent, detect and recover from cyberattacks such as denial of service and malware-infected firmware. Protecting applications, data and infrastructure from security breaches through storage and networking security technologies is first priority for HPE Gen10 Plus Servers. With Gen11 ProLiant Servers, HPE continues to offer industry-leading security and builds on Gen10 Plus features by adding support for SPDM security on select ethernet adapters..Ethernet adapter for Gen10 Plus ProLiant Servers.Provides data transfer rates up to 10Gbps.Contains two SFP+ ports.Features stand up profile with PCIe 3.0 x8.Power requirement: typical: 7.9 W; max: 9.1 W

Are you looking for a simple way to migrate to 10G high performance data center with low cost and low power in your data center? The HPE Ethernet 10Gb 2-port 562 Adapters deliver high performance and low latency for Ethernet traffic to and from the server with minimal CPU resources required. Processing of I/O packets on the adapter frees up CPU to do other more important tasks. For environments such as Telco/NFV, high-performance computing (HPC) and ecommerce that deal with large volumes of small packet traffic, these adapters accelerate small packet processing by bypassing processing in the host O/S kernel. Features: Improve Application Performance: HPE Ethernet 10Gb 2-port 562 Adapters offload packet processing to reduce CPU utilization with tunnel offloads (VXLAN and NVGRE). Now you can distribute network traffic across CPU cores in your data center. Speeds up packet processing to service more I/O requests utilizing data plane development packet (DPDK). Increase I/O Bandwidth for Workload Intensive Applications: HPE Ethernet 10Gb 2-port 562 Adapters deliver single root I/O virtualization (SR-IOV) which increases virtual network performance while decreasing CPU utilization. Provides a seamless performance upgrade from 1GBASE-T to 10GBASE-T with backward compatibility..10Gigabit Ethernet card offers the flexibility and scalability to make infrastructure run as efficiently and productively as possible with 10Gigabit data transfer rate.PCI Express 3.0 x4 interface provides enhanced bandwidth for the quick access of data by the operating system and applications.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

Startech.com® USB 3.0 Gigabit ethernet adapter works with 10/100/1000 Mbps networks and offers backward compatibility with USB 2.0 computer systems. Adapter has highly portable design and requires no external power adapter..Network adapter interface: RJ45 (Gigabit Ethernet).Network adapter speed: 1 Gbps (gigabit Ethernet).Platform supported: PC, Mac.Chipset ID: ASIX - AX88179.Connector type: 1 x RJ-45 female, 1 x USB 3.0 A (9 pin, SuperSpeed) male.Performance: Auto MDIX, 10/100/1000 Mbps compatible networks, full duplex support, 100 m max distance, 1 Gbps (gigabit Ethernet) maximum data transfer rate, USB 3.0 - 5 Gbps.OS compatibility: Windows 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), Windows Server 2008 R2, 2003(32/64), Mac OS 10.6 - 10.8, Linux Kernel 2.6.14 - 3.5.0.Temperature: 0 - 50 deg C (32 - 122 deg F) operating,0 - 70 deg C (32 - 158 deg F).System and cable requirements: Host computer system with an available USB 3.0/2.0 port.Media type supported: Twisted pair.Dimensions: 1"(H) x 0.9"(W) x 2.7"(D).Package contents: USB 3.0 to gigabit Ethernet NIC network adapter - 10/100/1000 Mbps, 1 x driver CD, 1 x instruction manual.Certifications and standards: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3az.Weight: 0.70 oz..Warranty: 2 years limited.Startech.com® USB 3.0 Gigabit ethernet adapter adds a single RJ45 Ethernet port to a USB-enabled computer system and provides gigabit network connections at full bandwidth when used with USB 3.0 host connection.