Gigabit Ethernet Network Cables

CAT-6 for seamless connection over a network.CAT-6 for seamless connection over a network.Designed to transmit data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.35' CAT-6 for easy tethering.Comes with a lifetime limited warranty

Ensure a reliable Ethernet network connection between your system and router using the Tripp Lite N201-006-RD CAT-6 Cable. RJ-45 male connectors are fitted at both ends of this networking cable for efficient signal transfer between devices. Its high-quality copper conductor is sheathed in a PVC jacket for durability and optimal insulation of the wire. Besides protecting the connector clips, the snagless design makes the cable less prone to snapping during installation..Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.6' CAT-6 for easy tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty.The Tripp Lite N201-006-RD 6' CAT-6 Gigabit Snagless Molded Patch Cable, Red, supports 10 Gigabit Ethernet networks to facilitate optimum data transfer.

CAT-6 for efficient data transfer across a network..Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.10' CAT-6 for easy tethering.Comes with a lifetime limited warranty

CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.6' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

The C2G ® 1' male/male Cat6 blue snagless shielded Ethernet network patch cable with PVC jacket, truncates both impedance and structural return loss. The 24-AWG bare copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. It safeguards high-speed network from noise and electromagnetic interference. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. It has aluminum foil shielding to get rid of EMI/RFI interference to ensure reliable error-free data communications. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable modem, patch panel and other high performance networking applications in high noise environments..Network patch cable safeguards high speed network from noise and electromagnetic interference.Cable length: 1'.Connections: one RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 26 AWG stranded bare copper conductors for excellent signal transmission.Meets ANSI/TIA 568 C.2, CE standards and certifications.Contact material: 50 micron gold-plated, Shell: Nickel plated for shieldingCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments.Comes in blue color.Voltage rating: 30 V.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 75 deg C.Offers immense protection from EMI/RFI interference.High quality cable and plugs construction minimizes near-end crosstalk (NEXT) levels.Weight: 0.05 lbs..Comes with lifetime warranty

Tripp Lite® 25' Cat6 molded patch cable in blue color has snagless pattern that offers protection for locking tabs on RJ45 male connectors. Cable with 4 pair stranded UTP is ideal for application requiring stable performance up to 550MHz/1 Gb/s..25ft.1 x RJ-45 Male.Blue.Material: Polyvinyl chloride (PVC) jacket.Connector details: 1 x RJ-45 male network on first and second end.Technology: Unshielded twisted pair (UTP).Conductor: Copper, Wires per cable: 8, Pairs per cable: 4.Features: Snagless, molded.Application: Computer networking.System requirements: or 1000 Base-T (1Gbps Ethernet), 10/100 Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and Token Ring TYPE 3 applications as well as EIA/TIA applications.Drastically reduce impedance and structural return loss, staggered-pin plug design to keep near-end crosstalk levels to a minimum.Integral strain relief.Certification and Standards: IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL, RoHS.Warranty: Lifetime limited.Tripp Lite 25' Cat6 Gigabit snagless molded patch cable in blue color has a molded design to provide reliable performance and enables high speed distribution of data, voice as well as video.

The C2G ® 10' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.RJ-45 Male.10ft.Yellow

Ensure a reliable Ethernet network connection between your system and router using the Tripp Lite N201-001-BK CAT-6 Cable. RJ-45 male network connectors are fitted at both ends of this networking cable for efficient signal transfer between devices. Its high-quality copper conductor is sheathed in a PVC jacket for durability and optimal insulation of the wire..Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male network connectors on both sides for easy connectivity.1' CAT-6 for easy tethering.Comes with a lifetime limited warranty.Designed for high-speed data transfer.Reduces cross-talk and return loss.Snagless boot.The Tripp Lite N201-001-BK 1' RJ-45 CAT-6 Patch Cable, Black, is apt for 10 Gigabit Ethernet networks and facilitates error-free data transfer.

Snagless molded patch cable..CAT-6 for seamless connection over a network.Designed to transmit data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.10' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

Tripp Lite N201-001-BL CAT-6 Gigabit Snagless Molded Patch Cable, 1 ft..Meets Category 6 cabling standards.Premium cabling for CAT-6, CAT-5E & CAT-5 applications.Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 & ETL (Category 6, draft 11).Drastically reduces impedance & structural return loss compared to standard 100MHz wire.Snagless boots protect the locking tabs on the RJ45 male connectors from being damaged during installation.Features molded connectors with integral strain relief.Rated for 550MHz/1Gbps communication.Blue.Lifetime limited warranty.The Tripp Lite N201-001-BL 1' RJ-45 CAT-6 Patch Cable, Blue, supports 10 Gigabit Ethernet networks to provide uninterrupted data transfer.

CAT-6 for efficient data transfer across a network..Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.15' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

The C2G ® 1' orange Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 1'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in orange color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.05 lbs..Comes with lifetime warranty.Comes with lifetime warranty

Network cable..CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.20' CAT-6 for easy tethering.Comes with a lifetime limited warranty

Premium cabling for Cat6 home/office network applications.Rated for 550 MHz/1 Gbps communications.Snagless connectors prevent damaged tabs during installation.24 AWG 4-pair stranded UTP with PVC jacket.Integral strain relief protects connectors from

CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.10' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty

The C2G ® 7' orange Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 7'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in orange color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty.StarTech.com® HDMM10 10' HDMI Cable with ultra HD male/male HDMI connectors supports 4k x 2k video signal. Offers multimedia interface with clear audio/video signal.

CAT-6 for seamless connection over a network..Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.15' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty

The N201-06N-WH Premium Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. This six-inch white cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG four-pair stranded UTP with a rugged PVC jacket, the N201-06N-WH delivers speeds up to 550 MHz/1 Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum. The RJ45 short-body connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Corrosion-resistant gold-plated copper contacts provide maximum conductivity and minimize data loss. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. Meets most other current industry standards, including IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11)..Premium cabling for Cat6 home/office network applications.Rated for 550 MHz/1 Gbps communications.Snagless connectors prevent damaged tabs during installation.24 AWG 4-pair stranded UTP with PVC jacket.Integral strain relief protects connectors from stress and cracking.Certifications & Standards: IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11)

50' cable.Black.1 per pack.Ideal for a high speed Internet access and home/small office networking.Up to 100MB per seconds for high bandwidth - perfect for audio/video distribution.Perfect in conjunction with 100 Base-T and Gigabit Ethernet networks.Available in 3', 7', 14', 25' & 50' sizes.Black

Get reliable internet connectivity by using this Ethernet patch cable. The gold-plated RJ45 connectors ensure high-quality signal transmission, while compatibility with CAT6 technology delivers speeds of up to 1Gbps. This Belkin Ethernet patch cable features molded strain relief to avoid fraying..CAT6 Ethernet patch cable for connecting to LANs or the Internet.32.81' cable length.RJ45 plugs with 50-micron gold-plated connectors.Features four unshielded twisted pair (UTP) 24 AWG stranded copper wires to reduce electromagnetic interference.Meets the CAT6 standard and is suitable for use with 100/1000BASE-T networks.Wires are housed in a durable PVC outer jacket for abrasion and corrosion resistance.Snagless design prevents cracking and breaking.Connect your computer to networking devices with this Belkin Ethernet patch cable.

Connect your computer system to a router, switch or hub with the Tripp Lite N201-006-BL CAT-6 Cable that offers reliable Ethernet connectivity. RJ-45 male connectors are fitted at both ends of this networking cable for efficient signal transfer between devices. Its high-quality copper conductor is sheathed in a PVC jacket for durability and optimal insulation of the wire. With its snagless design, the cable does not snap during installation and its connector clips remain protected..Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.6' CAT-6 for easy tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty.The Tripp Lite N201-006-BL 6' CAT-6 Gigabit Snagless Molded Patch Cable, Blue, is apt for 10 Gigabit Ethernet networks and facilitates error-free data transfer.

Monoprice® 3' Cat6A STP Ethernet network cable with a data transfer speed of 500 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in blue color has snagless strain relief boots while offering EMI and RFI interference protection..Blue.Cat6a.Fixed length network cables are the perfect combination of value and performance.3'.Gauge: 24 AWG.Cable rating: 550 MHz.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.Network cables are great for environments that are more susceptible to electronic interference.Device supported: Network device.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® 3' Cat6A STP Ethernet network cable in blue color is constructed from 24AWG stranded pure bare copper conductor for long lasting durability.

The C2G 27152 7' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 7'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color and features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G ® 6" RJ-45 male/male Cat6 blue snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. It features RJ-45 male connectors on both ends for enhanced connectivity. The 24 AWG stranded bare copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. This bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modems, DSL/cable modems, patch panels and other high performance networking applications..Type: Network Cable.Cable Type: Category 6.Cable Length: 0.5'.Size: 6".Color: Blue.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color.Diameter: 6.2 mm + 0.03 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.03 lbs..Comes with lifetime warranty.952 C2G - KVM & Networking 6" Cat6 Snagless Unshielded Network Patch Cable - Exponentially reduces impedence and structural return losses

The StarTech C6ASPAT10BK 10' Cat6a black patch cable features RJ-45 male connectors on both the sides for enhanced connectivity. This snagless shielded patch cable with PVC jacket, is great for 10GBase-T Ethernet networks and protects data against electromagnetic interference. It supports speeds up to 500 MHz and is compatible with PoE enabled devices. This cable assures fast and dependable 10 Gigabit network connections..Category 6a for Network Device, Hub, Switch, Router, Print Server, Patch Panel.1.25 GB/s.Patch Cable.10 ft.1 Pack.1 x RJ.45 Male Network.Shielding.Black.Iogear® GearPower Dual USB car charger features two 4.2 A charging outputs that are configured to ensure fast charging with all devices and allows you to charge your mobile devices while travelling.

The C2G 31341 5' Cat6 snagless green network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.5ft.Green.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

C2G® 6' CAT6 Snagless network patch cable in green color has RJ-45 male connectors on both ends and minimizes near end crosstalk levels. Cable has molded, snag less boot prevents unwanted cable snags during installation..Dimensions: 6'L.For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high-performance networking applications.Connector: 1 x RJ-45 male on first and second end.Conductor: Copper.Cable type: Category 6.Green.Snagless design protects clips when plugging and unplugging.Unshielded twisted pair wires.Weight: 0.174 lbs..Warranty: Lifetime.C2G® 6' CAT6 Snagless network patch cable in green color is constructed from high quality copper and is ideal for bandwidth intensive voice, data or video distribution applications.

The C2G ® 5' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty

The C2G 31341 5' Cat6 snagless red network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

Comprehensive CAT6 550 Mhz snagless patch cables meet all CAT6 TIA/EIA standards and greatly reduces loss compared to standard 100Mhz cable. Applications include: Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN, 100 Mbps TP-PMD (ANSI X3T9.5), 55/155 Mbps A, 622A and T1 Voice. Comprehensive CAT6 550 Mhz snagless patch cables have a molded low profile, snagless boot that makes installing these cables quick and easy every time while providing superior strain relief..CAT-6 snagless patch cables have a molded low profile, snagless boot that makes installing these cables quick and easy every time while providing superior strain relief.Cable length: 3'.Features an RJ45 (male) connector on each end.Constructed from high-quality 100% stranded copper and features a durable red PVC jacket; gauge is 24AWG.Bandwidth: supports voice/data/video distribution applications up to 550 MHz.Applications include: Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN, 100 Mbps TP-PMD (ANSI X3T9.5), 55/155 Mbps A, 622A, and T1 Voice.Meets all Category 6 568B 2.1 Draft 9 TIA/EIA standards.RoHS compliant, UL rated.Lifetime limited manufacturer warranty

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all CAT-6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..CAT-6 snagless unshielded (UTP) ethernet network patch cable is designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Cable length: 5'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.Snagless connector design for high density environments and protecting the RJ-45 connector's lock.Supports 10 Gigabit networks up to 180' for fast data transmission and maximum performance and supports 1 Gigabit up to 328'.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk.Meets all CAT-6 TIA/EIA requirements for supporting a wide variety of applications.50 cables per pack.Lifetime limited manufacturer warranty

The C2G ® two-foot RJ-45 male/male Cat6 black snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.2ft.Black.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.07 lbs..Comes with lifetime warranty

The C2G 31341 5' Cat6 snagless black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

Tripp Lite N200-002-BL 2' Blue RJ-45 to RJ-45 Male/Male Cat6 Gigabit Molded Patch Cable.Cat6 Gigabit molded patch cable connects computers, printers, video game systems, Blu-ray players, copy machines, routers and modems.Cable length: 2'.Color: Blue, Material: PVC jacket.Connectors: One RJ-45 male on both the ends.Conductor: 4 pair 24 AWG stranded UTP with gold-plated copper contacts for accurate signal transfer.Communication: Rated for 550 MHz/1 Gb/s.Designed for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, token ring type 3 and EIA/TIA applications.Flawless signal delivery with minimal near-end crosstalk levels.Molded integral strain relief for long life.RoHS Compliant.Comes with lifetime limited warranty

The C2G 3975 6' black Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Category 6 for Network Device.RJ-45 Male.6ft.Black.Certifications & Standards: TIA/EIA.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Comes with lifetime warranty

The C2G ® seven-foot red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. With its 24 AWG stranded bare copper conductor, it minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.7ft.Red.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 7'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in black.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

Designed for horizontal cable runs in air ducts / conduits / drop ceilings / walls etc.-Plenum fire rating-Supports reliable 550MHz/1 Gbps Ethernet network connections-Compatible w/ Category 5e & Category 6 applications-ETL Verified / 23 AWG / 100% Copper / Lifetime Warranty-Cat6 Ethernet Cable / Bulk Cat6 Cable / Box of Cat6 Cable / Cat6 Plenum Cable / Cat 6 Wire Network Cable / WIRC6CMP / WIRC6-1000 ft / 1000ft / 1000 foot / 1000foot / 1000 feet / 1000feet / 1000' / 1000 ' / 305 m.UL Listed CMP/FT6 Plenum Fire Rating.Supports reliable 550MHz/1Gbps Ethernet network connections.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.ETL verified.High quality 23 AWG copper wire.This bulk Cat6 cable delivers reliable Gigabit network connections, which ensures high-performance capability for your demanding Ethernet applications. The Cat6 cable is plenum rated for in-wall horizontal installations..This plenum-rated Category 6 cable has been tested for CMP (FT6), and is ideal for installation in air plenums, ducts, walls, conduit, drop ceilings, or anywhere CMP fire rating is required. It's perfect for delivering data, voice and video over Gigabit Ethernet networks..Make Gigabit network connections using this high-quality, plenum-rated Cat6 Cable

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 7'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

The C2G 2' blue Cat6 snagless patch cable has a RJ-45 male connector on each end for reliable connectivity. This cable features a snagless design that protects the connectors from damage and offers long-lasting optimal performance. It also features HDPE insulation and a PVC jacket for durability. The 24-AWG bare stranded copper conductors and 50-micron gold plated copper alloy connectors ensure optimal signal conductivity. This cable is suitable for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, and 4/16 Mbps token ring applications..Category 6 for Network Device.RJ-45 Male.2ft.Blue.RoHS, TIA/EIA-568-B-2.1 and draft 9 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN and 100 Mbps TP-PMD.Comes in blue color.Diameter: 0.98 + 0.05 mm.Voltage: 30 V.Resistance: 9.38 Ohm/100 m, Impedance: 100 Ohm.Mutual capacitance: 5600 pf/100 m.Temperature: 60 deg C.Propagation delay: 545 ns/100 m, Delay skew: 45 ns/100 m.Weight: 0.069 lbs..Comes with lifetime warranty.StarTech.com® PXT101NB10 10' Black power cord with NEMA 1-15P and IEC 60320 C7 connectivity helps to extend your laptop power cord length. 18 AWG cord provides reliable connection.

The C2G 22011 15' Cat5e 350MHz snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and FR-PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 15'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color and features polycarbonate connector, FR-PVC jacket, molded PVC hood, HDPE insulation and copper alloy contact.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.55 mm Nominal thickness, 5.3 +/- 0.15 mm O.D., 0.95 +/- 0.02 mm Dia. conductor.DC resistance: 89 Ohm/km maximum, Insulation resistance: 100 Ohm/km minimum, Dielectric strength: 500 MV/m.Frequency: Up to 350 MHz.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.35 lbs..Comes with lifetime warranty.Category 5e for Network Device.C2G® 29932 8' Black power extension cord with NEMA connectivity on both ends allow you to extend power cord for flexibility. The 16 AWG cord provides reliable connection.

The C2G ® 3' RJ-45 male/male Cat5e white snagless unshielded Ethernet network patch cable with FR-PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. This cable transmits data at the rate of 1000 Mbps. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.White.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.09 lbs..Comes with lifetime warranty

Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.50' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.1 x RJ45 male connector A/B.PVC 4-pair stranded UTP.25'.Conductor: Copper.System requirements: For 1000 Base-T (1 Gbps ethernet), 10/100 Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications as well as EIA/TIA application.Feature molded connectors with integral strain relief.High-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum.Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation.Deliver stable performance up to 550MHz/1 Gbps communication

Digiwave EM746100 100 ft. Cat5e 350Mhz Network Cable is uses for connecting a PC, Mac or network device to 10/100/1000 Ethernet networks. Gold plated copper contacts on the RJ45 male to male connectors provide excellent conductivity for accurate high speed transmissions. Snagless molded boot covers protect the RJ45 plug of the cable from damage during installation..Cat5e Network Cable.100 ft..Snagless booted connectors.350Mhz transfer rate.One year manufacture warranty

The C2G 31341 5' Cat6 snagless white network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G 3975 6' blue Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Dimensions: 6'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Type: Patch cable - CAT 6.Technology: UTP.Wiring Scheme: T568B.Wires per Cable: 8 wires.Features: Snagless, stranded , minimized Near-End Crosstalk (NEXT), reduced structural return loss (SRL).Manufacturer Warranty: Limited lifetime warranty

The C2G ® 3' white Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.Length: 3 ft.Connectors: 1 x RJ-45 - male.Connectors (Other Side): 1 x RJ-45 - male.Color: White.Manufacturer Warranty: Limited lifetime warranty.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.12 lbs..Comes with lifetime warranty

Tripp Lite N200-010-BL 10' Blue RJ-45 to RJ-45 Male/Male Cat6 Gigabit Molded Patch Cable.Cable length: 10'.Color: Blue, Material: PVC jacket.Connectors: One RJ-45 male on both the ends.Conductor: 4 pair 24 AWG stranded UTP with gold-plated copper contacts for accurate signal transfer.Communication: Rated for 550 MHz/1 Gb/s.Designed for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, token ring type 3 and EIA/TIA applications.Flawless signal delivery with minimal near-end crosstalk levels.Molded integral strain relief for long life.RoHS Compliant.Comes with lifetime limited warranty.Place document in pouch and insert into laminator.For use with laminators 12.5" entry width size or wider