Green Network Switches

This adaptable TRENDnet five-port gigabit GREENnet switch offers speed, high-bandwidth performance, and electrical efficiency. The tough metal unit is equipped with intelligent power-saving technology that adjusts its input voltage to match your networking needs. The result is an energy-efficient, economical switch with the capacity to make your LAN faster and easier to use..Package Contents: TEG-S50G 5-Port Gigabit GREENnet Ethernet Switch, Multi-Language Quick Installation Guide.Dimensions: 1.1" Height x 6.7" Width x 3.86" Depth.Input Voltage: 7.5V DC.Interfaces/Ports: 5 x RJ-45 10/100/1000Base-T LAN.Standard Warranty: 5 Year Limited.Weight: 15.17 oz.Number of Ports: 5.Gigabit Ethernet Port: Yes.Includes: 5-port gigabit GREENnet switch, multi-language quick installation guide.Auto-negotiation.Flow control.Store and forward switching architecture.Sturdy metal housing.TRENDnet Five-Port Gigabit GREENnet Switch - Local Area Network Device

Slice seconds or even minutes off your employees' daily activities by relying on the fast speed of this TRENDnet gigabit GREENnet 16-port switch for your company's uploads and downloads. Connect everything from computers and intercom systems to security cameras and alarms to this dependable switch for a safe, steady connection. This switch utilizes sixteen Gigabit Ethernet ports that are also Auto-Negotiation, Auto-MDIX. With Auto-Negotiation, the switch will figure out the appropriate speed to transfer data and the appropriate mode (full or half duplex) depending on what is supported by the device connected to your switch..Number of Ethernet Ports 16, Performance Class & Network Management Type 2 Layer Supported.15 x RJ-45.10/100/1000Base-T.Sturdy metal desktop switch with built in power supply.32Gbps forwarding capacity.Manufacturer's Limited Lifetime Warranty.Operating temperature: 32 - 104 deg F.Store-and-Forward switching architecture with non-blocking wire-speed performance.IEEE 802.3x flow control for full-duplex mode.Back pressure flow control for half-duplex mode.Operates and maximizes packet filtering and forwarding rate.Protocol / topology: CSMA/CD, star.Sturdy metal housing.Jumbo frames: Up to 9216 bytes.Internal Power Supply Reduces Clutter.Certificates: WEEE.TRENDnet Gigabit GREENnet 16-Port Switch - Affordable and Practical

Easily deploy or scale your network with this Gigabit Ethernet switch, by adding eight copper Gigabit Ethernet (GbE) connections, including four PoE+ ports. This IP30 industrial network switch provides intelligent Layer 2 management. Its rugged, compact design and wall-mount option with front access make it ideal for demanding applications, even where space is limited. Expand your network This Gigabit Ethernet switch lets you expand your network by connecting up to eight RJ45 devices (four PoE+). The 8-port switch enables up to eight users to share files and devices, such as printers and scanners, over a LAN connection, by enhancing your existing network capacity with additional ports. Supports PoE+ for flexible use The switch gives you the freedom to place your equipment in locations where power outlets are not available, with support for Power over Ethernet Plus. The network switch provides abundant PoE power, with up to 30 watts for each PoE port (120W budget). Wall-mountable with front access With its compact design, you can wall-mount the Gigabit switch to provide convenient front access to ports and indicators. It's ideal for a wide range of applications, including tight installation areas with significant electromagnetic interference, such as control cabinets and panels. The network switch is also DIN-rail mountable. Efficient Layer 2 management The switch delivers efficient and stable performance, with Layer 2 management capabilities. This lets you control packet traffic on a busy network, and customize your settings to achieve optimal network performance, offering improved efficiency and reliability. Rugged industrial design This rugged network switch features an IP30-rated metal housing and extended operating temperature range of -40°C to 75°C, which makes it ideal for a wide range of conditions. The sturdy metal enclosure offers durability, even in harsh industrial environments. Reliable connection for seamless network performance With support for 10/100/1000Mbps transfer speeds, this managed switch supports full/half-duplex auto-negotiation, jumbo frames, and auto MDI/MDIX operation. This lets you connect your network devices quickly and easily, with little to no configuration required. To help prevent any unnecessary downtime, the switch features redundant 12-58V DC terminal block power inputs, which ensures seamless operation in the event of power dips or failures. The IES81GPOEW is backed by a StarTech.com 2-year warranty and free lifetime technical support..Expand your network with 8x RJ45 (4 PoE+) ports in one Gigabit network switch.PoE power up to 30W per PoE+ port (120W budget).Rugged IP30 industrial design with metal housing and extended temperature range (-40 degreesto +75 degreesC)

Industrial 5 Port Gigabit PoE Switch - 30W - Power Over Ethernet Switch - Hardened GbE PoE+ Unmanaged Switch - Rugged High Power Gigabit Network Switch IP-30/-40 C to 75 C (IESC1G50UP).FLEXIBLE POWER INPUT: Power over Ethernet network switch can be hardwired using terminal block (48-56VDC) power or powered using a standard (48-56VDC) Type-N barrel wall adapter (not included).POWER OVER ETHERNET: Gigabit PoE Switch provides up to 30W of PSE power per PoE port to IEEE 802.3af (PoE) & IEEE 802.3at (PoE+) | Use with devices like cameras & access points using Cat 5e/6.ROBUST DESIGN: Industrial Network Switch w/MTBF 500,000+hrs @ 50C | Vibration, shock & free fall rated | Rugged industrial IP-30 aluminum housing | -40C to 75C hardened operating temp | DIN/Wall Mount.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This Gigabit PoE switch is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: 5 Port GbE Switch | 4 PoE ports | IEEE 802.3af / IEEE 802.3at | 10/100/1000 Mbps | Unmanaged | Redundant Power Input | Terminal Block Power | Total power budget: 120W.Rugged PoE Switch | 30 Watts | IP-30 Aluminum Housing | Unmanaged | 5 Port

The Allied Telesis GS910 Series offers unmanaged Gigabit switching solutions for the desktop, and small networks. The series has internal and external power supply versions, and also features network loop guard technology, which automatically detects any unexpected network loops, and prevents network devices from broadcast packet storms. OverviewWith minimal to no set-up, GS910 Series switches provide simple and seamless connectivity to existing network infrastructure. High performanceThe GS910 Series delivers the high speed and high performance demanded by today's high-bandwidth applications, such as video, graphics and industrial design. Quality and reliabilityAllied Telesis is a world-wide leader in unmanaged Ethernet switches. Shipping more than 250,000 unmanaged switches every year, Allied Telesis offers proven reliability, and industry-recognized quality. Loop detectionGS910 Series switches provide network loop detection by using Loop Detection Frame (LDF). LDF detects network loops, and shuts down ports where the loop is detected. After the loop is solved, the port that has shut down is automatically recovered. Environmentally-friendly eco-switchAllied Telesis GS910 Series eco-friendly switches conform with the Allied Telesis commitment to environmentally-friendly processes and products. They are designed to minimize power consumption through the use of a high-efficiency power supply and a low-power chipset. With low power consumption and a reduction in power outside regular work hours (overnight mode), as well as other power-saving features included as standard, the Allied Telesis GS910 Series truly lives up to its eco-friendly reputation. Not only does this help the planet by reducing the carbon footprint of each switch, it also lowers the Total Cost of Ownership (TCO) to the user, as the device costs less to run, and features improved reliability..Quickly and easily set up a wired network with 5 networking ports.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks.With leading Layer 2 support, experience enhanced convenience, secure business operations, and a borderless network experience.The unmanaged switch provides a quick, easy and cost-saving way to add wired networking to your home, office or small business; no intervention needed.Built-in power supply to ensure all components are being supplied with accurate voltage.The desktop installation makes it ideal for deployments outside the wiring closet

The TRENDnet TI-PG541I DIN-Rail mountable Ethernet switch has metal enclosure. It has 4 x Gigabit PoE+ 802.3at ports, 1 x Gigabit port and 1 x Gigabit SFP slot. This switch operates at a power rating of 130 W and features a switching capacity of 12 Gbps. It can withstand a high degree of vibration, shock and provides protection against ESD/EMI/surge. It operates within a wide temperature range for harsh environments. It includes LED indicators that show power, redundant power, alarm, SFP, PoE and network port status. It supports 1000Base-T and 1000Base-X network technologies for high performance..Gigabit Ethernet managed switch is ideal for deployment both at the core & the network edge to provide full gigabit speeds throughout the network.5 x gigabit Ethernet network, 1 x SFP.Management: CLI, HTTP web based GUI, SNMP v1, v2c, SNMP trap, RMON groups 1, 2, 3, 9, SNTP, SMTP alert, port mirror, storm control, traffic monitor.Data transfer rate: 10 Mbps (half-duplex), 20 Mbps (full-duplex) Ethernet, 100 Mbps (half-duplex), 200 Mbps fast Ethernet, 2000 Mbps gigabit Ethernet.Dimensions: 5.2"H x 5.3"W x 4.7"D.Power consumption: 10 W (max), 130 W (max.) with PoE+ fully loaded.Meets CE, FCC, Shock (IEC 60068-2-27), Freefall (IEC 60068-2-32), Vibration (IEC 60068-2-6) standards.Form factor: Rail-mountable.RAM buffer: 128MB.Network standards: IEEE 802.1p/802.1Q/802.3x/802.3z/802.3ab/802.3af/802.3at/802.3az.Media type supported: Optical fiber, twisted pair, network technology: 1000Base-T, 1000Base-X.Layer supported: 3.MAC address table: 8K entries, jumbo frames: 10 KB, MTBF: 180136 hours at 65 deg C, 435905 hours at 25 deg C.Includes: TI-PG541i, quick installation guide, CD-ROM (users guide).CLI and web based management, full power PoE+, wide operating temperature range, surge/ESD protection, dual redundant power inputs.Weight: 1.17 lbs..Comes with limited lifetime warranty

TRENDnet's Industrial Gigabit L2+ Managed DIN-Rail Switch series offers advanced layer 2 managed features with enhanced traffic controls to meet the evolving demands of today's SMB networks. Each industrial layer 2 managed switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° - 75° C (-40° - 167° F) for industrial environments. Our industrial layer 2 managed switch models feature copper Gigabit ports for high-speed device connections, and SFP slots that support 1000Base-FX modules for long distance fiber networking applications. These industrial layer 2 managed DIN-Rail switches provide an intuitive web-based management interface. Each TRENDnet industrial layer 2 managed switch supports advanced traffic management controls, troubleshooting, and SNMP monitoring. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring making each TRENDnet industrial layer 2 managed switch a powerful solution for SMB networks. This industrial 802.3bt PoE++ switch has four gigabit PoE++ ports with a 360W PoE power budget, plus two SFP slots for long distance fiber applications. Advanced PoE technology supported includes Perpetual PoE, Fast PoE, and PoE Alive Check..This switch includes 4 Gigabit Ethernet ports and 2 Gigabit SFP slots, offering a 12Gbps switching capacity. It is a Layer 3 managed switch, ideal for industrial and SMB network environments requiring advanced traffic control and reliability.Supports IEEE 802.3bt PoE++ with a 360W total PoE power budget, delivering up to 90W per port. Features include Perpetual PoE, Fast PoE, PoE scheduling, and PD alive check to automatically reboot unresponsive devices.Each port supports Gigabit Ethernet (10/100/1000 Mbps), ensuring high-speed data transmission across all connected devices.Designed for DIN-Rail mounting, the switch features a rugged IP30-rated metal enclosure suitable for harsh industrial environments with high vibration, shock, and extreme temperatures ranging from -40°C to 75°C.This is a wired-only switch and does not support wireless connectivity, focusing on robust, high-speed wired networking.Supports SNMP v1, v2c, and v3, enabling remote monitoring and management of network performance and device health.Includes IEEE 802.1p QoS with queue scheduling (SPQ/WRR) and DSCP support, allowing prioritization of critical traffic for smoother network performance.Offers a comprehensive management suite including Web GUI, CLI (Telnet/SSH), VLAN (802.1Q/Q-in-Q), IGMP Snooping, MLD, MVR, and MAC address filtering.Also supports Ethernet Ring Protection Switching (ERPSv2) for redundancy and alarm output for power failure alerts.Delivers non-blocking throughput with store-and-forward switching, and supports link aggregation (LACP), STP/RSTP, and bandwidth control per port for optimized traffic handling.Operates with dual redundant power inputs, includes overload current protection, and supports energy-efficient PoE scheduling to reduce power usage during off-hours

This switch is an unmanaged full Gigabit Ethernet hardened PoE+ switch that complies with IEEE 802.3at and IEEE 802.3af. The switch has (8) 10/100/1000Base-T PoE+ ports with two 100/1000 dual speed SFP slots. It can deliver up to 30 Watts on each PoE+ port simultaneously. The SISTP1040-382-LRT can be used at the edge of a hardened network to provide connections for PoE devices in hazardous locations. The two fiber uplink ports can also be used in a daisy chain for maximum network reliability. It has redundant input power connections to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments..Support Jumbo Frame up to 9K bytes.Layer 2 wire-speed switching engine.Ruggedized metal closure.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

TRENDnet® 5-Port Industrial Gigabit PoE+ DIN-Rail Switch.4 x Gigabit PoE+ ports, 1 x Gigabit port, 1 x Gigabit SFP slot, 6-pin terminal block, DC power connector, LED indicators and integrated DIN-Rail mount.Data transfer rate: 10 Mbps/20 Mbps Ethernet, 100 Mbps(half duplex)/200 Mbps(full duplex) Fast Ethernet, 2000 Mbps Gigabit, 2000 Mbps SX/LX.Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3at, IEEE 802.3af, IEEE 802.3x.Power adapter: 100 - 240 VAC, 50/60 Hz, 2 A input, 48 VDC, 3.34 A, 160 W max outputTerminal block: 48 - 57 VDC PWR (primary), 48 - 57 VDC RPS (redundant).Power consumption: 10 W min (standby), 130 W max, PoE budget: 120 W maxPoE: Up to 15.4 with port for PoE, up to 30 with port for PoE+, PoE: pin 1, 2 for power + and pin 3, 6 for power - (mode A).IP30 metal case, integrated DIN-rail mount, grounding point, 8 KV ESD protection, 6 kV surge protectionFull PoE+ power to each PoE+ port, alarm output triggered by power failure, auto store and automatic address learning and address aging.Operating temperature: - 40 - 70 deg C, operating humidity: 95 % non-condensing max.Includes TI-PG541, quick installation guide, DIN-rail kitCertifications and standards: CE, FCC, Shock (IEC 60068-2-27), freefall (IEC 60068-2-32), vibration (IEC 60068-2-6).Dimensions: 5.3" x 3.9" x 1.2".Weight: 1.2 lbs.Comes with lifetime limited warranty.Simply connect the headset to the computer and it is ready for use.Intuitive call-control unit attached to the cord allows for fast user adoption.Mono speaker.Optimized for all leading Unified Communications.Wideband audio sound.Noise-cancelling microphone.Crystal clear wideband sound.Soft and comfortable velour ear cushions.Adjustable headband.Superior noise-canceling microphone.Flexible boom arm tip for easy microphone adjustment.Plug-and-play USB connectivity and compatibility.Certifications and standards: CE; FCC; Shock (IEC 60068-2-27); freefall (IEC 60068-2-32); vibration (IEC 60068-2-6).⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.TRENDnet® 5-Port industrial Gigabit PoE+ DIN-rail switch has a switching capacity of 12 Gb/s and 120 W full PoE+ power budget for better performance.

18% off  of Netgear Plus 5-Port Gigabit Ethernet Managed Switch, 10/100/1000 Mbps (GS305EPP-100NAS)

Netgear Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Desktop managed switch with PoE meets business networks' growing need by providing fundamental network features that will help optimize the performance of business networks.Contains five 10/100/1000 RJ45 copper ports (auto uplink).Enable network configuration and management at the price point of unmanaged switches.Dimensions: 1.1"H x 6.2"W x 4"D.Certifications and standards: Meets or exceeds CE mark, commercial FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Simple, yet useful network set-up on top of plug-and-play connectivity.Business-friendly and easy-to-use web browser-based management GUI.VLAN support for traffic segmentation.Quality of Service (QoS) for traffic prioritization.Auto “denial-of-service” (DoS) prevention.Troubleshoot connection issues via cable test.Features port mirroring for network monitoring, jumbo frame support, per port PoE controls, uninterrupted PoE keeps PoE power on even when the switch is updating firmware or performing software reboot, 802.3at standard offering 30W/port.5-year manufacturer limited warranty

The Tenda TEG1005D is a 5-port Gigabit Ethernet switch designed to provide high-speed network connectivity for home and small office environments. This unmanaged switch supports up to 5 gigabit ports, each capable of delivering speeds up to 1000 Mbps, ensuring fast and stable connections for your devices. It is perfect for expanding your network with additional wired connections and is ideal for use with computers, printers, IP cameras, gaming consoles, and other Ethernet-enabled devices. The TEG1005D operates efficiently with its plug-and-play functionality, requiring no configuration, making it user-friendly for those who need quick, hassle-free setup. The switch is also energy-efficient, consuming less than 2.5W of power, which helps reduce operating costs. It features auto-sensing technology for automatic adjustment of port speeds and duplex settings to ensure the best possible performance for each connected device. With support for Jumbo Frame sizes up to 15KB, the TEG1005D provides efficient handling of large data packets, making it suitable for demanding tasks such as video streaming or large file transfers. This switch is built to operate in a range of environments, with an operating temperature range from 0°C to 40°C and the flexibility to be mounted on a desktop or wall..The Tenda TEG1005D features 5 Gigabit Ethernet ports, offering Gigabit Ethernet performance. It is an unmanaged switch, designed for plug-and-play simplicity with no configuration required..Provides a data transfer rate of up to 1000 Mbps (1 Gbps) per port, ensuring fast and efficient network communication..Has a desktop form factor and is also wall-mountable, providing flexibility for installation in various environments..The Tenda TEG1005D supports Gigabit Ethernet throughput with full-duplex operation on each port, ensuring maximum network performance and efficiency..Designed to be energy-efficient, consuming less than 2.5W of power, helping reduce operating costs and utilizing energy-saving technology..Complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab standards for Ethernet connectivity, ensuring reliable performance and compatibility across various devices and network setups.

The 8-Port Gigabit PoE+ Switch, model TPE-TG82g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as Access Points and IP Cameras. It supports both PoE and PoE+ devices with a 61W PoE budget. Plug and Play this sturdy metal switch for reliable high-speed PoE networking..Type of Ethernet Switch, Ethernet type & Usage: 8-Port Gigabit PoE+ Switch.No. & Type of Ports (including expansion slots): 8 x Gigabit PoE/PoE+ ports; LED indicators.Dimensions: 5.9 x 3.7 x 1.2 in..Power Consumption: Input: 110-240V AC, 50/60 Hz 1.2A; Output: 54 V DC, 1.67 A; Consumption: 36 Watts (Max.).Certifications: CE;FCC.A 61W PoE power budget supports up to eight Power over Ethernet devices..Eight gigabit ports provide a 16Gbps switching capacity to support edge network installations..Warranty: Lifetime Warranty.Operating Humidity: ax. 90% non-condensing.With a compact and lightweight housing design, this switch is well-suited for desktop installations. Its fanless design is ideal for quiet environments that require silent operation..16Gbps switching capacity.LED indicators convey port status.TPE-TG82G 8-Port Gigabit PoE+ Unmanaged Switch from TRENDnet

The Transition Networks® SISPM1040-384-LRT-C gigabit Ethernet managed switch is suitable for powering and connecting devices in hardened environments. This switch with 8 POE ports and 4 SFP ports, supports jumbo frames up to 9.6K bytes and supports G.8031 Ethernet linear protection switching. This black switch simultaneously supplies power to all the 8-ports, up to 30 W for each port. The hardened switch is perfect for factory floors, outdoor enclosures or other challenging environments. It includes embedded Device Management System (DMS) software, which provides advanced tools required for management of all IP addressable devices..Gigabit Ethernet managed switch is suitable for connecting and powering devices in hardened environments.8 x 10/100/1000Base-T PoE+, 4 x 100/1000Base-X SFP ports, RJ-45 serial console.Management: VLAN, Private VLAN Edge, Voice VLAN, GVRP, Web, SNMP v1,v2c,v3, Telnet, CLI, DMS, security: HTTPS/SSH v1/v2, IP source guard.Backplane: 24 Gbps.Dimensions: 5.4"H x 2.4"W x 5.3"D.Power consumption: 11 W (Max) without PoE.Meets EMI, CE, FCC Part 15, EN61000-4-2, EN61000-4-3, EN-61000-4-4, EN61000-4-6, IEC60068-2-32, EN50155, EN50121-4, NEMA TS-2, IEEE1613 standards.Power supply: 24 VDC, 1 A digital output, 48 to 57 VDC input.VLANs: 4000.Protocols: Supports LLDP, TCP/UDP source, DSCP/IP precedence.Indicators: Status LEDs - system, power 1, ring master, coupling, power 2, alarm, port status.Mac address: 8K, jumbo frames: 9.6KB.Layer supported: 2, color: Black.Temperature rating: -40 to 75 deg C operating, -40 to 85 deg C (storage), humidity: 5 to 95% (non-condensing).Weight: 2.2 lbs..Comes with 5 year warranty.Black 8-port gigabit Ethernet managed switch supports Jumbo frames up to 9.6 KB, LLDP protocol, port mirroring and port based network access control.

Create an office network that enables employees to share Internet access and peripheral devices with the TRENDnet TE100-S8 Ethernet switch. This unmanaged switch makes it easy for small businesses to set up a network and configure access, so you don't have to spend money on dedicated IT help to get the most out of this device. Plug-and-play capabilities and auto-negotiation make it an uncomplicated process to optimize network access, performance, and security..8 x 10/100Base.TX.Port configuration: 8 x RJ-45 10/100Base-T Auto-MDIX.Buffer memory: 512 KB.Address database size: 1000 MAC addresses.3 years limited warranty.Features store-and-forward switching method, non-blocking architecture, diagnostic LEDs and plug and play.Connectivity media: Twisted pair.Power adapter: Switching power 5 VDC at 800 mA or linear power 7.5 VDC at 1 A.Power consumption: 2.8 W (max.).Twisted pair cable standard: Category 5.Network media: Ethernet: UTP/STP Cat. 3,4,5, EIA/TIA-568 100-ohm, fast ethernet: UTP/STP Cat. 5. 5E, EIA/TIA-568 100-ohm.Topology: Star.Features: Compliant with windows, linux, and mac operating systems, store-and-forward switching method, non-blocking architecture, power link/ACT.Switch fabric: 96 Gbps of forwarding capacity.Includes: TE100-S85 fast ethernet switch, power adapter(5 VDC, 800 mA), multi-language quick installation guide.Operating temperature: 32 - 122 deg F.Operating humidity range: 10 - 90%, non-condensing.Compliant standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x.TRENDnet TE100-S8 Ethernet Switch, Eight Ports - Easy Network Management

StarTech.com® 5-Port Industrial Ethernet switch is an ideal network solution for harsh industrial environments such as factory floors, warehouses or large junction boxes. Features redundant 12-58V DC terminal block power inputs to help prevent unnecessary downtime. Supports alarm relay contacts for an existing alarm circuit for quick notification during power disruption..Gigabit ethernet switch is perfect for industrial applications like warehouses and junction boxes without temperature control.Features 5 x 10/100/1000Base-T female RJ-45 network port/interface for easy connectivity.Supports Twisted pair media for easy data transfer.Transfers data reliably at the rate of 2 Gb/s.Comes with durable black steel enclosure.Works with 12 - 58 VAC at 50/60 Hz and consumes 3.63 W power.Comes with link/activity, power, port transmission speed, alarm status indicators.Meets IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3u, IEEE 802.3x compliant.Comes with: 128 KB packet buffer, auto-uplink, energy efficient ethernet, flow control, full duplex mode features.Withstands the temperature of -40 to 75 deg C, -40 to 85 deg C of storage temperature and humidity of 5 - 95percentage for efficient operation.Contains 1x industrial ethernet switch, 2x wallmount brackets, 1x din rail clip, 4x screws, 1x terminal block and 1x instruction manual.Comes with 2 years warranty.StarTech.com® 5-Port Industrial Ethernet switch has IP30-rated DIN rail and wall-mountable metal enclosure. Supports IEEE 802.3x flow control and back-pressure.

Netgear Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Desktop managed switch with PoE meets business networks' growing need by providing fundamental network features that will help optimize the performance of business networks.Contains five 10/100/1000 RJ45 copper ports (auto uplink).Enable network configuration and management at the price point of unmanaged switches.Dimensions: 1.1"H x 6.2"W x 4"D.Certifications and standards: Meets or exceeds CE mark, commercial FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Simple, yet useful network set-up on top of plug-and-play connectivity.Business-friendly and easy-to-use web browser-based management GUI.VLAN support for traffic segmentation.Quality of Service (QoS) for traffic prioritization.Auto “denial-of-service” (DoS) prevention.Troubleshoot connection issues via cable test.Features port mirroring for network monitoring, jumbo frame support, per port PoE controls, uninterrupted PoE keeps PoE power on even when the switch is updating firmware or performing software reboot, 802.3at standard offering 30W/port.5-year manufacturer limited warranty