Multi Gigabit Switch

The SISPM1040-582-LRT is a full managed PoE++ switch suitable for connecting and powering devices in hardened environment. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on four ports or 60 Watts per port on eight ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

This switch is a next generation rack mount hardened switch with 136Gbps switching capacity. It provides (24) 10/100/1000 PoE+ ports, (4) 100/1000 dual speeds SFP ports, It has additional (4) 1G/10G SFP+ slots..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The SISPM1040-362-LRT is a full managed PoE+ switch suitable for connecting and powering devices in hardened environments. The switch can supply up to 30 Watts per port on all four PoE ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..Store-and-Forward Architecture with 16 Gbps Switching Bandwidth.Supports Jumbo frames up to 9.6K Bytes.Ring Protections: Industry standard G.8032 Ethernet Ring Protection Switching (ERPS), Support G.8031 Ethernet Linear Protection Switching (EPS), Rapid Ring with recovery time less than 20ms.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Brainboxes Industrial 5-port gigabit unmanaged Ethernet switch is perfect for embedded applications. Galvanically isolated Ethernet ports capable of 10/100/1000 Mbps. Dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimized based on the status of the link device. No software required..This unmanaged Ethernet switch is perfect for embedded applications.Contains 5 x RJ45 jacks, 10/100/1000Mbs autosensing (auto-MDIX) Ethernet ports.No software required.Dimensions: 3.7"H x 3.5"W x 0.8"D.Power consumption: 3.6W.Certifications and standards: Meets or exceeds the Microsoft Certified Gold Partner, WEEE, RoHS, AEO (C-TPAT), CE standards.Ready for embedded applications.Easy wire-removable screw terminal block.Ethernet interface takes advantage of the company's pre-existing infrastructure, allowing you to connect to your Brainboxes device over the local network or from across the world.Lifetime manufacturer limited warranty

Pure compatibility, pure stability, pure design. The perfect fit for any stable, future-proof system, even where space is limited..This unmanaged Gigabit Ethernet switch features five ports, supports speeds of 10/100/1000 Mbps, and operates without the need for configuration..Data transfer rate of 10/100/1000 Mbps, supporting Gigabit Ethernet speeds.It has a mega compact form factor, measuring just 55 x 55 x 16 mm (2.17 x 2.17 x 0.63 inches), which is smaller than a standard business card..Designed for straightforward plug-and-play operation without the need for configuration.With a throughput of 10/100/1000 Mbps, this device supports Gigabit Ethernet speeds and operates in a non-blocking layer 2 mode, ensuring efficient data transfer without packet loss..Maximum power consumption of 3.3W.Industrial operating temp (-40 °C to +85 °C / -40°F to +176°F).Seamless integration with design software - logical placements and fixed distances.Board to board and board to cable connection.LEDs visible in all orientations – can be directed to outer casing via fiber optics or light pipe, or electrically wired.Comes with a 10 year limited warranty

Introducing the NETGEAR MS510TXUP Multi-Gigabit/10G Ethernet Ultra60 PoE++ Smart Switch with 2 SFP+ Ports and 295W PoE budget for WiFi 6 Access Point connectivity and power..Four 1G/2.5G Ethernet ports and Four Multi-Gig/10G Ethernet ports.8 PoE++ ports with 295W total power budget.2 x 10G SFP+ ports.Management software with easy-to-use GUI interface offers secure setup, access, and SNMP (NMS 300) management. Includes NETGEAR Insight to remotely manage your networks from anywhere..Supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.Reduces fan noise to protect your home office or business environment..Covered by ProSAFE, an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..Dimensions in Inches: 13L x 8.12W x 1.7H; Weight in Pounds: 5.5.Insight Cloud Management, Desktop/Rackmount, ProSAFE Lifetime Protection

The TRENDnet TI-PG541I DIN-Rail mountable Ethernet switch has metal enclosure. It has 4 x Gigabit PoE+ 802.3at ports, 1 x Gigabit port and 1 x Gigabit SFP slot. This switch operates at a power rating of 130 W and features a switching capacity of 12 Gbps. It can withstand a high degree of vibration, shock and provides protection against ESD/EMI/surge. It operates within a wide temperature range for harsh environments. It includes LED indicators that show power, redundant power, alarm, SFP, PoE and network port status. It supports 1000Base-T and 1000Base-X network technologies for high performance..Gigabit Ethernet managed switch is ideal for deployment both at the core & the network edge to provide full gigabit speeds throughout the network.5 x gigabit Ethernet network, 1 x SFP.Management: CLI, HTTP web based GUI, SNMP v1, v2c, SNMP trap, RMON groups 1, 2, 3, 9, SNTP, SMTP alert, port mirror, storm control, traffic monitor.Data transfer rate: 10 Mbps (half-duplex), 20 Mbps (full-duplex) Ethernet, 100 Mbps (half-duplex), 200 Mbps fast Ethernet, 2000 Mbps gigabit Ethernet.Dimensions: 5.2"H x 5.3"W x 4.7"D.Power consumption: 10 W (max), 130 W (max.) with PoE+ fully loaded.Meets CE, FCC, Shock (IEC 60068-2-27), Freefall (IEC 60068-2-32), Vibration (IEC 60068-2-6) standards.Form factor: Rail-mountable.RAM buffer: 128MB.Network standards: IEEE 802.1p/802.1Q/802.3x/802.3z/802.3ab/802.3af/802.3at/802.3az.Media type supported: Optical fiber, twisted pair, network technology: 1000Base-T, 1000Base-X.Layer supported: 3.MAC address table: 8K entries, jumbo frames: 10 KB, MTBF: 180136 hours at 65 deg C, 435905 hours at 25 deg C.Includes: TI-PG541i, quick installation guide, CD-ROM (users guide).CLI and web based management, full power PoE+, wide operating temperature range, surge/ESD protection, dual redundant power inputs.Weight: 1.17 lbs..Comes with limited lifetime warranty

Built for Security, IoT, Mobility, and Cloud The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: ? Simplified device deployment ? Unified management of wired and wireless networks ? Network virtualization and segmentation ? Group-based policies ? Context-based analytics.Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: ? Simplified device deployment ? Unified management of wired and wireless networks ? Network virtualization and segmentation ? Group-based policies ? Context-based analytics.Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The Grandstream GWN7813P is a high-performance Layer 3 managed switch designed for medium-to-large enterprise networks. Featuring 24 Gigabit Ethernet ports with PoE++ support and 4 10G SFP+ uplinks, it delivers up to 128Gbps switching capacity for seamless data flow. Smart power control enables dynamic PoE allocation per port, with a total budget of 360W and up to 60W per port. Advanced security features like ARP inspection, IP source guard, and DoS protection safeguard your network, while built-in QoS and ACL filtering optimize traffic prioritization. The GWN7813P supports IPv4/IPv6 routing, stacking, and is managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms. Its versatile mounting options and robust design make it ideal for scalable, secure, and intelligent business deployments..24 Gigabit ports and Layer 3 managed switching for enterprise-grade control..Enables dynamic PoE++ allocation with up to 60W per port and 360W total power budget..Up to 128Gbps switching capacity and supports 4 high-speed 10G uplinks..Suitable for desktop, wall, or rack mounting with included installation accessories..Supports SNMP v1/v2c/v3 for remote monitoring and network diagnostics..Prioritizes traffic using advanced QoS with shaping, scheduling, and rate limiting..Secures networks with ARP inspection, IP guard, DoS defense, and port isolation..Operates with VLANs, link aggregation, and dynamic routing protocols like OSPF and BGP..Optimizes energy use with smart power control and efficient fan speed adjustment..Certified by FCC, CE, RCM, IC, and UKCA for global compliance and safety standards.

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

This switch is an unmanaged full Gigabit Ethernet hardened PoE+ switch that complies with IEEE 802.3at and IEEE 802.3af. The switch has (8) 10/100/1000Base-T PoE+ ports with two 100/1000 dual speed SFP slots. It can deliver up to 30 Watts on each PoE+ port simultaneously. The SISTP1040-382-LRT can be used at the edge of a hardened network to provide connections for PoE devices in hazardous locations. The two fiber uplink ports can also be used in a daisy chain for maximum network reliability. It has redundant input power connections to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments..Support Jumbo Frame up to 9K bytes.Layer 2 wire-speed switching engine.Ruggedized metal closure.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Built for Security, IoT, Mobility, and Cloud The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: ? Simplified device deployment ? Unified management of wired and wireless networks ? Network virtualization and segmentation ? Group-based policies ? Context-based analytics.Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Brainboxes Industrial compact 5-port Gigabit Ethernet unmanaged switch is perfect factory floor, in vehicle and marine applications. Automatic detection of data transmission speed: 10/100/1000 Mbps. Dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimized based on the status of the link device. No software required..This unmanaged compact Ethernet switch is perfect for factory floor, in-vehicle, and marine applications.Contains 5 x RJ45 jacks, 10/100/1000Mbs autosensing (auto-MDIX) Ethernet ports.No software required: simply plug in any ethernet cable.Dimensions: 3.9"H x 3.7"W x 0.9"D.Power consumption: 3.6W.Certifications and standards: Meets or exceeds the Microsoft Certified Gold Partner, WEEE, RoHS, AEO (C-TPAT), CE standards.Nonconducting polyamide case with all-round small profile.Easy wire-removable screw terminal block.All Ethernet ports are auto-MDI/MDIX supporting straight through or crossover Ethernet cables.Integral DIN mount with ground.Lifetime manufacturer limited warranty

Brainboxes Industrial compact 5-port Gigabit Ethernet unmanaged switch is perfect factory floor, in vehicle and marine applications. Automatic detection of data transmission speed: 10/100/1000 Mbps. Dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimized based on the status of the link device. No software required..This unmanaged compact Ethernet switch is perfect for factory floor, in-vehicle, and marine applications.Contains 5 x RJ45 jacks, 10/100/1000Mbs autosensing (auto-MDIX) Ethernet ports.No software required: simply plug in any ethernet cable.Dimensions: 3.9"H x 3.7"W x 1.1"D.Power consumption: 3.6W.Certifications and standards: Meets or exceeds the Microsoft Certified Gold Partner, WEEE, RoHS, AEO (C-TPAT), CE standards.Tough metal case with all-round small profile.Easy wire-removable screw terminal block.All Ethernet ports are auto-MDI/MDIX supporting straight through or crossover Ethernet cables.Integral DIN mount with ground.Lifetime manufacturer limited warranty

Built for Security, IoT, Mobility, and Cloud: The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: Simplified device deployment. Unified management of wired and wireless networks. Network virtualization and segmentation. Group-based policies. Context-based analytics..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

+5 to +30 Volt Power Input enables the device to be run from a standard car battery - ideal for in vehicle applications Tough metal casing with removable numbered power terminal for easy wiring Integral DIN mount and slim design provides Ethernet connecti.8 Port 10/100 Mbs Ethernet Switch.Redundant dual power inputs: +5V to +30V DC.Compact design with integral DIN mount.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

+5 to +30 Volt Power Input enables the device to be run from a standard car battery - ideal for in vehicle applications Tough metal casing with removable numbered power terminal for easy wiring Integral DIN mount and slim design takes up minimal cabinet s.5 Port 10/100 Mbs Ethernet Switch.Redundant dual power inputs: +5V to +30V DC.Compact design with integral DIN mount.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The Grandstream GWN7816 is a powerful Layer 3 managed switch engineered for high-performance enterprise networks. With 48 Gigabit ports and 6 10G SFP+ uplinks, it delivers up to 216Gbps switching capacity and 160.704Mpps forwarding rate, ideal for demanding data environments. Advanced routing capabilities—including static, dynamic, and policy routing—enable seamless communication across network segments. Built-in QoS, ACL filtering, and multicast support optimize traffic flow and security. The GWN7816 supports stacking, link aggregation, and dual boot redundancy for enhanced reliability. Energy-efficient features like EEE and intelligent fan control reduce power consumption, while IPv4/IPv6 dual stack ensures future-ready connectivity. Managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms, this switch offers scalable control and simplified maintenance. Optional hot-swappable PSU and robust surge protection further reinforce its enterprise-grade resilience..48 Gigabit ports and Layer 3 managed switching for enterprise-grade performance..Up to 216Gbps switching and 160.704Mpps forwarding rate..Mounts easily on desktop or rack with included hardware..SNMP v1/v2c/v3 enables remote monitoring and diagnostics..Built-in QoS prioritizes traffic with advanced scheduling and shaping..Secures networks with ACL, 802.1X, MAC auth, and DoS defense..Operates with stacking, link aggregation, and dynamic routing protocols..Reduces power use via EEE ports and smart fan speed control..Complies with FCC, CE, RCM, IC, and UKCA standards.

The Grandstream GWN7816P is a high-performance Layer 3 managed switch built for enterprise-grade networks requiring robust PoE capabilities. Featuring 48 Gigabit Ethernet ports and 6 10G SFP+ uplinks, it delivers up to 216Gbps switching capacity and 160.704Mpps forwarding rate for seamless data throughput. With support for IEEE 802.3af/at/bt standards, it offers dynamic PoE/PoE+/PoE++ allocation per port, delivering up to 740W total output—ideal for powering IP cameras, phones, and access points. Advanced security features like ARP inspection, IP source guard, and DoS protection safeguard your infrastructure, while built-in QoS and ACL filtering ensure optimized traffic control. The GWN7816P supports stacking, dual boot redundancy, and intelligent fan control for enhanced reliability and energy efficiency. Managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms, it offers flexible deployment and simplified maintenance for modern business environments..48 Gigabit ports with Layer 3 managed switching for enterprise-grade performance..Supports PoE/PoE+/PoE++ with up to 740W total output across all 48 ports..Mounts on desktop or rail with included front and rear rack kits..SNMP v1/v2c/v3 enables remote monitoring and diagnostics..Built-in QoS prioritizes traffic with advanced shaping and scheduling..Secures networks with ACL, 802.1X, MAC auth, and DoS protection..Operates with stacking, link aggregation, and dynamic routing protocols..Reduces power use via EEE ports and smart fan speed control..Complies with FCC, CE, RCM, IC, and UKCA standards for global deployment.

The Grandstream GWN7811 is a high-performance Layer 3 managed network switch designed for small to medium-sized enterprise deployments. Equipped with 8 Gigabit Ethernet ports and 2 10G SFP+ uplinks, it delivers up to 56Gbps switching capacity and 28Gbps non-blocking throughput for seamless data flow. Advanced security features like ARP inspection, IP source guard, and DoS protection ensure robust network defense, while built-in QoS and ACL filtering optimize traffic prioritization and access control. With support for IPv4/IPv6, stacking up to 4 devices, and flexible management via Web GUI, CLI, SNMP, and Grandstream’s cloud platforms, the GWN7811 offers scalable, secure, and intelligent networking. Its compact form factor supports desktop, wall, or rack mounting, making it ideal for versatile installations..8 Gigabit ports and supports Layer 3 fully managed switching..Up to 56Gbps switching and 28Gbps non-blocking throughput..Designed for desktop, wall, or rack mounting with included hardware..Lacks wireless connectivity, offering stable wired networking only..Supports SNMP v1/v2c/v3 for remote monitoring and device management..Enables traffic prioritization with built-in QoS and advanced scheduling..Secures networks with ACL, 802.1X, MAC auth, and DoS protection..Operates with stacking, VLANs, link aggregation, and dynamic routing..Saves energy via EEE ports and intelligent fan speed control..Certified by FCC, CE, RCM, IC, and UKCA for global compliance.

Expand your home or office's network capacity with fast and reliable connections using the MS305 5-Port 2.5Gb Ethernet Unmanaged Switch from Netgear. This unmanaged network switch integrates into your network without requiring any complicated configuring. Its five Ethernet ports each support up to 2.5Gb transfer rates with compatible computers, servers, network storage drives, and other devices. The 25 Gb/s switching capacity and 3.72 Mpps forwarding rate help to ensure smooth data transfers. This compact switch may be mounted onto a desktop or wall, and its fanless design allows it to operate silently in the background..Features 5 Ethernet ports, Multi-Gigabit performance class, and is an Unmanaged Switch.Offers a data transfer rate of up to 2.5Gbps per port.Compact desktop form factor with optional wall-mounting capability.Supports basic QoS (Quality of Service) through 802.1p traffic prioritization.Total switching throughput of 25Gbps and operates in store-and-forward mode.Consumes up to 9.24 watts and supports IEEE 802.3az Energy Efficient Ethernet for reduced power usage during low data activity.Simple set up with no software or configuration needed.Easy monitoring through per port LEDs for port activity and speed.Non-blocking switching architecture for maximum throughput at wire speed.3-Year Limited Warranty

Create your own LAN and connect your PC, laptop, printer and other peripherals with the help of 4 ports..Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Managed switch provides a reliable foundation for your network

The Aruba 6300M switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba network analytics engine, the Aruba 6300M extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX mobile app verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management..Stackable switch is perfect for enterprise network access, aggregation, core and data center top-of-rack deployments.Features 24 x 1/2.5/5GbE BASE-T PoE and 4 x 1/10/25/50G SPF ports.Management security restricts access to critical configuration commands, provides multiple privilege levels with password protection, and local/remote syslog capabilities allow logging of all access.Throughput: 476Mpps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Maximum power consumption: 131-139W with JL086A, JL087A, JL670A PSU; switching capacity: 640Gbps.Certifications and standards: Meets or exceeds UL, FCC standards.Allows for stacking of up to 10 switches, providing scale and simplified management.Stackable layer 3 switch with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS.Provides NetEdit support for automation, configuration, verification, and one-touch deployment with the mobile app.Offers redundancy and PoE customization with hot-swappable power supplies and fans.Memory and processor: 1.8GHz quad-core ARM Cortex-A72; 8GB DDR4 and 32GB eMMC with 8MB shared packet buffer memory.Class 6 PoE ports supporting up to 60W per port.Switch has two fan tray slots and comes with one fan tray installed.Lifetime manufacturer limited warranty

Axis Communications industrial PoE switch is a four-port managed industrial PoE Gigabit switch. In addition, the switch is equipped with two RJ45 and two SFP data ports that allows for extra devices to be connected. The ruggedized industrial switch is developed for challenging environments, when mounted inside a surveillance cabinet. Perfect for high demanding installations such as alongside highways and tunnels..Four-port managed industrial PoE gigabit switch is perfect for high-demanding installations, such as alongside highways and tunnels.Full-power PoE switch with a 240W PoE power budget.Four gigabit ports provide a 16Gbps switching capacity to support edge network installations.Comes with an individual password, an easy-to-use setup wizard, and a comprehensive set of configuration tools, such as an integrated DHCP server for automatic assignment of IP addresses.5-year manufacturer limited warranty

The NETGEAR XS512EM Plus Switch is designed for desktop or rackmount and features 12-Ports of 100M/1G/2.5G/5G/10G Multi-Gigabit Ethernet, 2 x 10G SFP+ ports (2 are shared), ProSAFE Lifetime Protection and more..12 Multi-gig/10G Ethernet ports.2 x 1G/10G SFP+ ports (both are shared).Management software with easy-to-use GUI interface offers basic capabilities to configure, secure, and monitor your network..Supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.Reduces fan noise to protect your home office or business environment..Covered by an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..NETGEAR Plus Switch

TRENDnet® 8-Port green net switch features green net technology which adjusts the power voltage as needed. Gigabit green net switch boost your office efficiency and eliminate network congestion..8 ports 10/100/1000base-T gigabit ethernet.Address database size: 8000 MAC addresses.Management: Unmanaged switch.Power: Input: 100 - 240 V, 50/60 Hz, 190 mA, output: 5 VDC, 1 A external power adapter, consumption: 3.5 W (max.).Form factor: Desktop.Dimensions: 1"(H) x 5.8"(W) x 3.8"(D).Media type supported: Twisted pair, twisted pair cable standard: category 6.Layer supported: 2.Switch fabric: 16 Gbps forwarding capacity.Data RAM buffer: 256 Kbytes, jumbo frame support: 9216 bytes.Protocol / topology: CSMA/CD, Star.Network media: Ethernet: Cat. 5 up to 100 m, fast Ethernet: Cat. 5 up to 100 m, Gigabit Ethernet: Cat. 5, 5e,6 up to 100 m.Data rate: Ethernet: 10Mbps/20Mbps (half/full-duplex), Fast Ethernet: 100Mbps/200Mbps (half/full-duplex), Gigabit Ethernet: 2000Mbps (full-duplex).Store and forward switching architecture with non-blocking wire-speed performance.Temperature: Operating: 0 - 40 deg C, storage: -10 - 70 deg C, humidity: max 90% (non-condensing).Includes multi-language quick installation guide, power adapter (5 VDC, 1 A).Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000base-T, IEEE 802.3x flow control, IEEE 802.3az energy efficient Ethernet, certifications: FCC, CE.Weight: 13.4 oz..Warranty: 3 years limited.Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000base-T, IEEE 802.3x flow control, IEEE 802.3az energy efficient Ethernet, certifications: FCC, CE.Warranty: 3 years limited.TRENDnet® 8-Port green net switch reduces power consumption by up to 70 percent and provides high bandwidth performance.

NETGEAR Plus switches with PoE meet business networks growing needs by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus Switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. The Netgear MS108EUP supports 2.5 Gigabit speed connectivity and Power-Over-Ethernet (PoE) that can provide up to 60W/port. This switch can power devices such as VoIP phones, surveillance IP cameras, wireless access points and many other applications. Netgear Plus switch includes advance PoE control to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..8 x multi-gigabit Ethernet ports provide up to 2.5Gbps of dedicated non-blocking bandwidth each.4 x Ultra60 PoE++ and 4 x PoE+ ports provide a total of 230W of power, so you can charge and connect your devices with a single wire.40Gbps (10/100/1000Mbps) line-rate fabric ensures congestion-free connectivity with your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Business-friendly and easy-to-use web browser-based management GUI.Energy-Efficient Ethernet (IEEE 802.3az) support for maximum power savings.Advanced PoE controls: manage PoE prioritization, scheduling, power limit per port, and more for simple control over all PoE-powered devices.Fanless design makes this switch perfect for noise-sensitive environments.Simple, yet useful network set-up on top of plug-and-play connectivity.VLAN support for traffic segmentation.Auto “denial-of-service” (DoS) prevention.Energy-Efficient Ethernet (IEEE 802.3az) support for maximum power savings.Port mirroring for network monitoring.Loop prevention and broadcast storm controls.Lifetime 24/7 chat technical support.Lifetime manufacturer limited warranty

The Grandstream GWN7832 is a high-performance Layer 3 aggregation switch designed for enterprise-grade deployments. Featuring 12 SFP+ 10G ports, it delivers up to 240Gbps switching capacity and 178.56Mpps forwarding rate, ideal for handling peak network loads. Advanced VLAN segmentation, IGMP/MLD Snooping, and built-in QoS ensure optimized traffic flow and performance. Robust security features—including ARP inspection, IP source guard, and DoS protection—safeguard your infrastructure. With support for IPv4/IPv6, stacking, and dual power redundancy, the GWN7832 offers scalable reliability. Managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms, it provides centralized control and simplified maintenance for modern business networks..Aggregates 12 SFP+ ports with Layer 3 managed switching for enterprise networks..Up to 240Gbps switching and 178.56Mpps forwarding rate..Mounts on desktop, wall, or rack with included kits..SNMP v1/v2c/v3 enables remote monitoring and diagnostics..Built-in QoS prioritizes traffic with advanced shaping and scheduling..Secures networks with ACL, 802.1X, MAC auth, and DoS protection..Operates with stacking, link aggregation, and dynamic routing protocols..Reduces power use via efficient PSU and surge protection..Complies with FCC, CE, RCM, IC, and UKCA standards.

This Transition Networks Lantronix eight 10/100/1000Base-T port switch with Auto-MDI/MDIX is an unmanaged multi-port switch that can be used to build high-performance switched networks. This switch is a store-and-forward device that offers low latency for high speed networking. It is designed for the core of the network backbone computing environment to solve traffic block problems at SME (small, medium enterprise) businesses..Eight-port 10/100/1000BASE-T switch with Auto-MDI/MDIX is an unmanaged multi-port switch that can be used to build high-performance switched networks.Eight gigabit ports provide a 16Gbps switching capacity to support edge network installations.Power consumption: 3.5W.Meets or exceeds the LVD, FCC, CE, and UL standards.Supports full and half duplex for 10/100Mbps and full duplex for 1000Mbps.Wire-speed packet filtering and forwarding rate.Supports jumbo frames up to 9KB.5-year manufacturer limited warranty

Ubiquiti UniFi switch Pro is a fully managed Layer 3 switch with 48 Gigabit Ethernet ports. Four 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi switch Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi switch Pro is perfect aggregation and access layer switch for any UniFi solution – it combines innovative near-silent cooling with UniFi SmartPower RPS power redundancy. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed switch features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server.Contains 48 10/100/1000 RJ45 ports and four 1/10G SFP+ Ethernet ports Ethernet In-Band.UniFi Controller allows configuring: operation mode (switching, mirroring, or aggregate) per port, network/VLAN configuration, jumbo frame and flow control services, network settings, etc..Dimensions: 1.72"H x 17.42"W x 11.24"D.Maximum power consumption: 60W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.Passive cooling design allows the switch to be located in any workspace.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.Offers Layer 3 capabilities, such as inter-VLAN routing, static routing, and DHCP server functionality.Features the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.OS support: Linux, Mac OS X, or Microsoft Windows 7/8/10.Pack includes: switch, two rack-mount brackets, eight bracket screws, four mounting screws, four cage nuts, power cord, four rubber feet.2-year manufacturer limited warranty

NETGEAR introduces the XS508M, the first 8-port 10-Gigabit/Multi-Gigabit Ethernet Switch with 1 SFP+ port for Home and Business with 1G/2.5G/5G/10G per port flexible connectivity. Each of the 4 Ethernet ports automatically detects which speed is needed by the connected device and provides the adequate connection speed. Modern, high-performance network devices such as 5G network cards, gamer PCs, desktop PCs, servers, NAS storage or AC Wave 2 Wireless Access Points now come with 2.5-Gigabit or 5-Gigabit connectivity. In order to benefit from the full potential of these high-speed devices, performance and coverage, the NETGEAR XS508M Multi-speed capabilities are THE solution for plug-and-play flexible connectivity for your modern business or home..Unmanaged switch provides eight ports with multi-gigabit connectivity to your devices.Expand your network instantly, and provide your devices with either 100Mbps, 1G, 2.5G, 5G, or 10G data transfer rate automatically.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the CE: CB 60950-1, LVD 60950-1, AUS/NZ: AS/NZS 60950-1, USA: UL 60950-1, SNE VA and Taiwan: BSMI (CNS 14336-1) standards.One SFP+ fiber port offers 1G/10G connectivity or high-speed uplink connectivity to your core network.Switch is whisper-quiet due to an active fan.Simple setup with no software or configuration needed.Durable metal case and long product life (shown by MTBF numbers).Certifications and standards: CB mark, UL/cUL Listed, IEC, AS/NZS, Russia EAC mark.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.

The Netgear M4300-48X switch delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge and SMB core deployments with unrivaled ease of use. Nonstop forwarding (NSF) virtual chassis architecture provide advanced High Availability (HA) with hitless failover across the stack. Intelligent Netgear IGMP Plus multicast allows for scalable Pro AV installations at Layer 2 without the PIM complexity. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing – as standard. The Netgear M4300 Switch Series is perfect for wireless access, unified communications and professional AV-over-IP installations. Netgear Intelligent Edge Switch solutions combine latest advances in hardware and software engineering for higher flexibility, lower complexity and stronger investment protection, at a high-value price point..Stackable managed switch for midsize organization networks.Features 48 x 10GBASE-T (RJ-45), 4 x 10GBASE-X (SFP+) shared ports, out-of-band 1G Ethernet management port, Mini-USB and RJ45 RS232 console ports, USB storage port.960Gbps non-blocking fabric across 48 ports.Dimensions: 1.73"H x 17.32"W x13.58"D.Maximum power consumption: 237.2W.Full-width form factor with one-unit rack mount kit.Full L3 feature set and nonstop forwarding (NSF) stacking.Ships with one modular APS250W PSU in first power supply slot.Ship with a blank cover in the second power supply slot.Low acoustics (40.3dB at 77 degrees Fahrenheit).Lifetime manufacturer limited warranty

79fed5312f55810a4758d633bc638d55.Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The Netgear M4350-24F4V Series is a 1RU layer 3 managed switch with 24x 10GBASE-X SFP+ ports and 4x 25GBASE-X SFP28 uplinks. Equipped with one slot for modular power supply (1+1 redundancy). Supports Virtual Chassis stacking provides non-stop forwarding (NSF) and hitless failover, NETGEAR IGMP Plus, AV User Interface, and Engage Controller speed up AV installations..Layer 3 managed switch with 24 x 10GBASE-X SFP+ ports with 4 25GBASE-X SFP28 uplinks.1/10/25G Gigabit Ethernet line rate ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Flexible management via easy-to-use web browser based management.Equipped with one slot for modular power supply (one-plus-one redundancy).Lifetime manufacturer limited warranty

Enjoy high speed, reliability, and flexibility by expanding your business's network capacity with the M4300-8X8F 16-Port RJ45/SFP+ 10G Managed Network Switch from Netgear. Pre-configured for AV-over-IP, this fully managed switch includes Layer 2, 3, and 4 feature sets, such as hot-swappable mixed stacking, with up to eight switches in a single logical switch. However, there are no license requirements to support video broadcast and other high-bandwidth applications. The M4300-8X8F features sixteen 10G ports, comprised of eight RJ45 copper wire connectors and eight SFP+ fiber optic transceiver slots. This switch is designed to smoothly transfer data with a 320 Gb/s switching capacity and 238 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection. The half-width design allows you to install two switches into the same rackmount space for redundancy. A modular 250W power supply is included..16 Ethernet ports, is classified as a High-Performance switch, and offers Managed network management..Switch supports ultra-fast connectivity with a 10Gbps data transfer rate on each port, ensuring high-speed performance for demanding networks..Compact half-width design and 1RU rack-mountable form factor, allowing flexible installation in space-constrained environments..Full SNMP support (v1, v2c, and v3) for comprehensive network monitoring and centralized management..Equipped with advanced Quality of Service capabilities, including DiffServ, Auto-VoIP, and Auto-iSCSI prioritization, to optimize traffic for voice and storage applications..robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Delivers 320Gbps switching capacity and supports Layer 2, Layer 3, and Layer 4 operational modes, ensuring scalability and flexibility for enterprise networks..Operates with up to 250W power draw and intelligent fan control, promoting energy efficiency and reduced operational costs..IEEE 802.3 standards and OpenFlow 1.3, making it SDN-ready and suitable for modern networking environments..Authentication method: RADIUS, TACACS+.Form factor: Rack mountable

79fed5312f55810a4758d633bc638d55.Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Ubiquiti USW-WAN is a managed switch designed for high-performance networks with high requirements. With 1 RJ45 1GbE port and 3 SFP ports , it provides flexibility and high throughput, ideal for a variety of network applications. With 10Gbps band width support and reliable integration with UniFi Network, this device will meet the needs of professional environments. Ubiquiti USW-WAN has 1 RJ45 1GbE port and 3 SFP ports , providing flexibility in the choice of network connections. With SFP ports , the switch supports 10G speeds, making it ideal for extended networks requiring high bandwidth. The manageable switch allows you to configure and manage your network easily and quickly. The switch offers power redundancy with two AC inputs, which increases the reliability of the device, ensuring network continuity even in the event of a power failure. The 100-240V AC-based power supply makes the device suitable for a variety of environments. The Ubiquiti USW-WAN is a solution that ensures stability and uninterrupted operation in professional networks. The Ubiquiti USW-WAN integrates seamlessly with the UniFi Network system, enabling full network management. With the UniFi system, you gain access to advanced features such as monitoring and configuration of the device and network. The manageable switch makes network administration easy, and thanks to its intuitive interface, configuration is quick and simple. The Ubiquiti USW-WAN is made of sturdy SGCC steel material, which ensures durability and resistance to mechanical damage. The unit weighs just 2.3 kg with mounting brackets, making it easy to mount in a rack. The managed switch is also equipped with ESD/EMP surge protection, which ensures the longevity of the device and increases network security..The switch features 1 Gigabit Ethernet RJ45 port and 3 high-speed 10G SFP+ ports, delivering enterprise-grade performance with full Layer 2 managed capabilities for seamless integration into UniFi Network environments.Enjoy non-blocking throughput of 10 Gbps and a switching capacity of 20 Gbps, ensuring fast and efficient data handling for demanding network applications.Designed for professional setups, the switch comes in a compact 1U rack-mountable form factor, making it ideal for data centers and enterprise environments.Manage the device easily via UniFi Controller, with advanced security features like ESD protection (±16kV air, ±22kV contact) and redundant power inputs for uninterrupted operation.The switch offers carrier-grade throughput with 15 Mpps forwarding rate, supporting Shadow Mode High Availability for linking dual UniFi Gateways to a single ISP.With a maximum power draw of only 13W, the switch is energy-efficient while providing dual AC inputs for redundancy and reliability.Comes with a standard 2-year warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x 10Gbps SFP+ ports engineered for 1Gb AV over IP.24 PoE+ ports (30W/port) provide a total of 480W of power, so you can power and connect your devices with a single wire.132Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

All PoE ports fully support PoE/PoE+ and feature Dynamic PoE capability that intelligently optimizes power distribution by detecting each device's actual requirements and allocating resources as necessary over time, rather than solely based on PoE class reported. Unlike standard PoE that reserves maximum power based only on PoE class reported per port regardless of usage, Dynamic PoE efficiently reallocates unneeded power back to the switch to power up more devices with the same PoE budget. This makes these switches ideal for deploying a wide range of devices like Wireless Access Points, Pan/Tilt/Zoom and fixed IP cameras, VoIP phones, security door locks, and virtually any IoT PoE-powered device, while redistributing power where it's needed and maximizing your network's capacity without wasting energy..POWER-OVER-ETHERNET: 4 PoE+ ports delivering up to 30W per port with a 63W total power budget for wireless APs, IP Cameras, IP Phones and much more..PLUG-AND-PLAY: Simple set up with no software to install or configuration needed.NON-BLOCKING SWITCHING: Non-blocking switching architecture for maximum throughput at wire speed.FANLESS DESIGN: Silent operation makes this switch perfect for noise-sensitive environments.VERSITILE MOUNTING OPTIONS: Install your switch on your desktop or mount it to your wall with the hardware provided in the box.ENERGY EFFICIENT: Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption when there is light traffic on an active port or when there is no link or no activity detected Flex PoE.Featuring the industry's first flexible PoE+ integrated technology, you can easily scale your power capabilities by simply upgrading the power supply—effectively future proofing both your small business network and budget.

Cisco Catalyst IE3300 Rugged Series switches deliver high-speed up to 10 Gigabit Ethernet connectivity in a compact form factor, and are designed for a wide range of industrial applications where hardened products are required. The modular design of the Cisco Catalyst IE3300 Rugged Series offers the flexibility to expand to up to 26 ports of Gigabit Ethernet or up to 24 ports of Gigabit Ethernet and 2 ports of 10 Gigabit (10G) Ethernet with a range of expansion module options. The platform is built to withstand harsh environments in manufacturing, energy, transportation, mining, smart cities, and oil and gas. The IE3300 platform is also perfect for extended enterprise deployments in outdoor spaces, warehouses, and distribution centers..Rugged Gigabit Ethernet switch for a wide range of industrial applications where hardened products are required.This model has 8 x 10/100/1000 RJ45 copper ports, 2 x 100/1000 SFP uplinks, and expandable to up to 26 ports of GE by attaching one of eight compatible modules.Can be managed with powerful management tools such as Cisco DNA Center and Cisco Industrial Network Director, and a completely redesigned user-friendly modern GUI tool called WebUI.Dimensions: 6"H x 3.6"W x 5.3"D.Power consumption: 23W.Built for harsh environments and temperature ranges (-40 degrees Fahrenheit to 167 degrees Fahrenheit).Fanless, convection-cooled with no moving parts for extended durability.Hardened for vibration, shock and surge, and electrical noise immunity.Complies with multi-industry specifications for automation, ITS, and substation environments.Improves uptime, performance, and safety of industrial systems and equipment.Alarm I/O for monitoring and signaling to external equipment.Enables ultrahigh definition (UHD), PTZ IP cameras, programmable logic controllers (PLC) and Wi-Fi 6 access points.Delivers multiple rings and redundant ring topologies for new network configurations.Extends geographical scalability where longer-distance connectivity is required.SwapDrive for zero-configuration replacement.Full Flexible NetFlow (FNF) provides enhanced flow and threat visibility.IPv6 Ready Logo certified.Comes with Network Essentials perpetual license.5-year manufacturer limited warranty

Cisco Catalyst IE3300 Rugged Series switches deliver high-speed up to 10 Gigabit Ethernet connectivity in a compact form factor, and are designed for a wide range of industrial applications where hardened products are required. The modular design of the Cisco Catalyst IE3300 Rugged Series offers the flexibility to expand to up to 26 ports of Gigabit Ethernet or up to 24 ports of Gigabit Ethernet and 2 ports of 10 Gigabit (10G) Ethernet with a range of expansion module options. The platform is built to withstand harsh environments in manufacturing, energy, transportation, mining, smart cities, and oil and gas. The IE3300 platform is also perfect for extended enterprise deployments in outdoor spaces, warehouses, and distribution centers..Rugged switch delivers Gigabit Ethernet connectivity in a compact form factor, and designed for a wide range of industrial applications where hardened products are required.Eight 10/100/1000 RJ45 Ethernet PoE+ and two 100/1000 SFP ports.Managed with powerful tools such as Cisco DNA Center and Cisco Industrial Network Director, and can be easily set up with a completely redesigned user-friendly modern GUI tool called WebUI.Dimensions: 6"H x 3.6"W x 5.3"D.Power consumption: 32W.Built for harsh environments and temperature ranges (-40 to 167 degrees Fahrenheit).Hardened for vibration, shock and surge, and electrical noise immunity.Complies with multi-industry specifications for automation, ITS, and substation environments.Covers a wide range of Power over Ethernet (PoE) (up to IEEE 802.3bt type 4) application requirements.Alarm I/O for monitoring and signaling to external equipment.High-density industrial Power over Ethernet (PoE) enables ready-to-use PoE devices, such as IP phones, cameras, and wireless access points.User-friendly GUI (called WebUI) allows for easy configuration and monitoring.SwapDrive for true zero-configuration and simple switch replacement in the event of a failure.Full Flexible NetFlow Enables optimization of the network infrastructure, reduces operation costs, and improves capacity planning and security incident detection.5-year manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 10Gbps SFP+ ports engineered for 1Gb AV over IP.40 PoE++ ports (90W/port) provide a total of 2880W of power, so you can power and connect your devices with a single wire.240Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cords, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

055204f6a69f94130dbae780b5757299.Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Supports layer 3 switching for enhanced performance and usability.Managed switch provides a reliable foundation for your network.Built-in power supply to ensure all components are being supplied with accurate voltage.The desktop installation makes it ideal for deployments outside the wiring closet

The Aruba 2930M Switch Series is designed for customers creating digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave. With support from cloud-based Aruba Central, you can quickly set up remote offices with little or no IT support. A powerful Aruba ProVision ASIC delivers performance and value with support of the latest SDN apps with future proof programmability for tomorrow's applications. High performance modular stacking for up to 10 switches provides pay as you grow scalability and simplicity. The 2930M supports 10GbE and 40GbE uplinks, Dual Modular Power Supplies, up to 1440 Watts of PoE+, models with 24 ports of HPE Smart Rate multi-gigabit Ethernet, robust QoS, RIP, Access OSPF routing, Tunnel Node, PIM, VRRP and IPv6 with no software licensing required. The Aruba 2930M Switch Series provides a convenient and cost-effective access switch solution that can be quickly set up with Zero Touch Deployment. The switches include a Limited Lifetime Warranty. FEATURES AND BENEFITS: Software-defined networking: OpenFlow supports OpenFlow 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths. Unified Wired and Wireless ?: ClearPass Policy Manager supports unified wired and wireless policies using Aruba ClearPass Policy Manager. Switch auto-configuration automatically configures switch for different settings such as VLAN, CoS, PoE max power, and PoE priority when an Aruba access point is detected. User role defines a set of switch-based policies in areas such as security, authentication, and QoS. A user role can be assigned to a group of users or devices, using switchbased local user role or download from ClearPass. Tunnel Node provides a secure tunnel that transports network traffic on a per-port or per-user role basis to an Aruba Controller. In a per-user role Tunnel Node, users are authenticated by the ClearPass Policy Manager which directs traffic to be tunneled to an Aruba controller or switch locally. HTTP redirect function supports HPE Intelligent Management Center (IMC) bring your own device (BYOD) solution. Quality of Service (QoS): Traffic prioritization (IEEE 802.1p) allows real-time traffic classification into eight priority levels mapped to eight queues. Layer 4 prioritization enables prioritization based on TCP/UDP port numbers. Class of Service (CoS) sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ. Rate limiting sets per-port ingress enforced maximums and per-port, per-queue minimums ?. Large buffers Provide graceful congestion management..Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Gigabit Ethernet port for ultra-fast network speeds.Supports layer 3 switching for enhanced performance and usability.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage.Rack mounting enables you to organize wires & secure cables for professional installation

Secure, manage, and monitor your small-to-medium site's networked devices with the UniFi Gateway Max from Ubiquiti Networks. With advanced routing and security features, this compact gateway may be placed between your network and the internet through its five 2.5 Gb/s Ethernet ports, which includes one dedicated WAN and a configurable WAN/LAN port to help manage traffic and deter threats..3 x 2.5G Ethernet LAN Ports, 1 x 2.5G Ethernet WAN/LAN Port, 1 x 2.5G Ethernet WAN Port.USB-C Power Port.1.5 GHz ARM Cortex A53 Quad-Core CPU.2GB DDR4 RAM.CloudKey & UniFi Network Management.Compact Design.Managed with UniFi Network 8.1.113 and later.Management interface Ethernet, Bluetooth.USB-C powered (adapter included).Up to 1.5 Gbps routing with IDS/IPS.Max. power consumption 9.6W