Grippy Gloves

4% off  of Gofit Go Grip XL Weightlifting Gloves, Gray (GF-GTCFF-XL)

The GoFit Go Grip Full-Finger Training Glove in X-Large offers Smart Touch Technology, an advanced ergonomic, padded Go-Tac palm, and Super Grit Grip between the thumb and forefinger for durable comfort and maximum gripping power. Superior high-performance materials and progressive design help reduce hand fatigue and makes these gloves first-rate. Train. Recover. Repeat. GoFit. * Before beginning any weight loss or exercise program, you should consult with your physician..Full-finger gloves with Smart Touch finger technology on thumb and forefinger.Vented jersey back with soft suede thumb wipe.Reinforced, double-stitched, synthetic leather fingers.Synthetic leather palm with ergonomic, silicone Go-Tac Grip.Durable VELCRO closure and easy-on pull tab.Super Grit Grip for maximum gripping power between thumb and forefinger.4-way stretch material between fingers for comfortable, secure fit.X-Large

The Ergodyne ProFlex 7401 coated winter work gloves provide lightweight warmth and durable grip in cool to cold temperatures. Lined with fleece for soft thermal protection, and a flexible, latex-coated palm allows for secure gripping. Unlike typical thermal work gloves, these gloves are extremely lightweight and highly dexterous. A breathable 10g brushed acrylic fleece liner protects hands from cool air. The knit construction and elastic wrist form a comfortable fit that does not compromise dexterity, and the latex-coated palm is both flexible and durable for handling equipment or materials. These coated gloves meet the EN 388:2131X standard for cut resistance..SUPERIOR GRIP – Latex coated palm is flexible and durable.BREATHABLE THERMAL PROTECTION – 10g brushed acrylic fleece liner for soft comfort and warmth.Size: XL (10).12 pairs of gloves per pack.DEXTERITY – Lightweight knit for easy handling of equipment and materials.COMFORTABLE – Knit construction and elastic wrist forms a snug fit.Flexible and durable latex-coated palm provides superior grip.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

4% off  of Gofit Go Grip Large Weightlifting Gloves, Gray (GF-GTCFF-L)

The GoFit Go Grip Full-Finger Training Glove in Large offers Smart Touch Technology, an advanced ergonomic, padded Go-Tac palm, and Super Grit Grip between the thumb and forefinger for durable comfort and maximum gripping power. Superior high-performance materials and progressive design help reduce hand fatigue and makes these gloves first-rate. Train. Recover. Repeat. GoFit. * Before beginning any weight loss or exercise program, you should consult with your physician..Full-finger gloves with Smart Touch finger technology on thumb and forefinger.Vented jersey back with soft suede thumb wipe.Reinforced, double-stitched, synthetic leather fingers.Synthetic leather palm with ergonomic, silicone Go-Tac Grip.Durable VELCRO closure and easy-on pull tab.Super Grit Grip for maximum gripping power between thumb and forefinger.4-way stretch material between fingers for comfortable, secure fit.Large

The Ergodyne ProFlex 7401 coated winter work gloves provide lightweight warmth and durable grip in cool to cold temperatures. Lined with fleece for soft thermal protection, and a flexible, latex-coated palm allows for secure gripping. Unlike typical thermal work gloves, these gloves are extremely lightweight and highly dexterous. A breathable 10g brushed acrylic fleece liner protects hands from cool air. The knit construction and elastic wrist form a comfortable fit that does not compromise dexterity, and the latex-coated palm is both flexible and durable for handling equipment or materials. These coated gloves meet the EN 388:2131X standard for cut resistance..SUPERIOR GRIP – Latex coated palm is flexible and durable.BREATHABLE THERMAL PROTECTION – 10g brushed acrylic fleece liner for soft comfort and warmth.Size: M (8).12 pairs of gloves per pack.DEXTERITY – Lightweight knit for easy handling of equipment and materials.COMFORTABLE – Knit construction and elastic wrist forms a snug fit.Flexible and durable latex-coated palm provides superior grip.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

The Ergodyne ProFlex 7401 coated winter work gloves provide lightweight warmth and durable grip in cool to cold temperatures. Lined with fleece for soft thermal protection, and a flexible, latex-coated palm allows for secure gripping. Unlike typical thermal work gloves, these gloves are extremely lightweight and highly dexterous. A breathable 10g brushed acrylic fleece liner protects hands from cool air. The knit construction and elastic wrist form a comfortable fit that does not compromise dexterity, and the latex-coated palm is both flexible and durable for handling equipment or materials. These coated gloves meet the EN 388:2131X standard for cut resistance..SUPERIOR GRIP – Latex coated palm is flexible and durable.BREATHABLE THERMAL PROTECTION – 10g brushed acrylic fleece liner for soft comfort and warmth.Size: 2XL (11).12 pairs of gloves per pack.DEXTERITY – Lightweight knit for easy handling of equipment and materials.COMFORTABLE – Knit construction and elastic wrist forms a snug fit.Flexible and durable latex-coated palm provides superior grip.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

4% off  of Gofit Go Grip Medium Weightlifting Gloves, Gray (GF-GTCFF-M)

The GoFit Go Grip Full-Finger Training Glove in Medium offers Smart Touch Technology, an advanced ergonomic, padded Go-Tac palm, and Super Grit Grip between the thumb and forefinger for durable comfort and maximum gripping power. Superior high-performance materials and progressive design help reduce hand fatigue and makes these gloves first-rate. Train. Recover. Repeat. GoFit. * Before beginning any weight loss or exercise program, you should consult with your physician..Full-finger gloves with Smart Touch finger technology on thumb and forefinger.Vented jersey back with soft suede thumb wipe.Reinforced, double-stitched, synthetic leather fingers.Synthetic leather palm with ergonomic, silicone Go-Tac Grip.Durable VELCRO closure and easy-on pull tab.Super Grit Grip for maximum gripping power between thumb and forefinger.4-way stretch material between fingers for comfortable, secure fit.Medium

The Ergodyne ProFlex 7401 coated winter work gloves provide lightweight warmth and durable grip in cool to cold temperatures. Lined with fleece for soft thermal protection and a flexible, latex-coated palm for secure gripping. Unlike typical thermal work gloves, these gloves are extremely lightweight and highly dexterous. A breathable 10g brushed acrylic fleece liner protects hands from the cool air. The knit construction and elastic wrist form a comfortable fit that does not compromise dexterity, and the latex-coated palm is both flexible and durable for handling equipment or materials. These coated gloves meet the EN 388:2131X standard for cut resistance. They are great for work in cool to cold dry environments, including material handling and construction..SUPERIOR GRIP – Latex coated palm is flexible and durable.BREATHABLE THERMAL PROTECTION – 10g brushed acrylic fleece liner for soft comfort and warmth.Size: L (9).12 pairs of gloves per pack.DEXTERITY – Lightweight knit for easy handling of equipment and materials.COMFORTABLE – Knit construction and elastic wrist forms a snug fit.Flexible and durable latex-coated palm provides superior grip.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

Ironclad® Large box handler gloves in black color are made of breathable spandex for added comfort. Gloves come with patented slip resistant silicone-fused palm for sticky grip and have airprene wrap for knuckle impact protection..Box handler gloves.Size: Large.1 Pair.Breathable spandex allows for lasting comfort.Patented silicone-fused palm for super-tacky grip.Airprene knuckle impact protection.Hook and loop closure.9" length.Primary material: Silicone.Hand Specific.Ideal for use when handling glass, metals, ceramics, baggage, and working hand or power tools.Good for handling glass, metals and ceramics and for working with power tools, as well as providing a steady grip while toting packages.

CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

CUT RESISTANT – ANSI A7 cut protection and level 4 abrasion resistance for protection when working with incredibly sharp or jagged materials.FLEXIBLE NO-SLIP GRIP – PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.REINFORCED THUMB SADDLE – Boosts durability in high wear areas.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X42F, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

7501 S Gray Coated Waterproof Winter Gloves.THERMAL PROTECTION ; 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.WATERPROOF ; Fully coated latex protects hands from water and cold air.SUPERIOR GRIP ; Sandy, nitrile-dipped palm for secure gripping.DEXTERITY ; Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED ; Meets EN 388: 2131X.MACHINE WASHABLE

7501 M Gray Coated Waterproof Winter Gloves.THERMAL PROTECTION ; 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.WATERPROOF ; Fully coated latex protects hands from water and cold air.SUPERIOR GRIP ; Sandy, nitrile-dipped palm for secure gripping.DEXTERITY ; Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED ; Meets EN 388: 2131X.MACHINE WASHABLE

The Ergodyne ProFlex 7031 nitrile-coated cut-resistant gloves are designed to provide durability and grip in all conditions, wet or dry. The 13-gauge A3 cut protection liner is cut-, puncture-, and abrasion-resistant for the toughest environments. The reinforced thumb dip adds extra protection in a high-wear area. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The sandy nitrile dip provides an excellent grip for all conditions. These protective gloves are made from 13-gauge yarn that provides level 3 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. The Ergodyne ProFlex 7031 A3 nitrile-coated gloves are perfect for workers in construction, manufacturing, fabrication, service technicians, and material handling..CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE.Sandy nitrile dip provides an excellent grip for all conditions.Features ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A3, EN 420:2003+A1:2009, EN 388:2016 4X42C standards.Care instructions: machine-washable

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without bulk. These gloves are perfect for work in cold wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures, great for work in cold wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: XL (10).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

CUT RESISTANT – ANSI A7 cut protection and level 4 abrasion resistance for protection when working with incredibly sharp or jagged materials.FLEXIBLE NO-SLIP GRIP – PU coated palms provide strong but flexible grip for secure handling with enhanced dexterity on a variety of surfaces.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.REINFORCED THUMB SADDLE – Boosts durability in high wear areas.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X42F, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

The Ergodyne ProFlex 7031 nitrile-coated cut-resistant gloves are designed to provide durability and grip in all conditions, wet or dry. The 13-gauge A3 cut protection liner is cut-, puncture-, and abrasion-resistant for tough environments. The reinforced thumb dip adds extra protection in a high-wear area. These nitrile-coated gloves also feature ANSI Level 4 abrasion resistance for long wear. The sandy nitrile dip provides an excellent grip for all conditions. These protective gloves are made from 13-gauge yarn that provides Level 3 cut protection with dexterity and comfort. The Ergodyne ProFlex 7031 A3 nitrile-coated gloves are perfect for workers in construction, manufacturing, fabrication, service technicians, and material handling..CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE.Sandy nitrile dip provides an excellent grip for all conditions.Features ANSI Level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A3, EN 420:2003+A1:2009, EN 388:2016 4X42C standards.Care instructions: machine-washable

7501 L Gray Coated Waterproof Winter Gloves.THERMAL PROTECTION ; 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.WATERPROOF ; Fully coated latex protects hands from water and cold air.SUPERIOR GRIP ; Sandy, nitrile-dipped palm for secure gripping.DEXTERITY ; Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED ; Meets EN 388: 2131X.MACHINE WASHABLE

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without bulk. These gloves are perfect for work in cold wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures, great for work in cold wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: 2XL (11).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

The Ergodyne ProFlex 7031 nitrile-coated cut-resistant gloves are designed to provide durability and grip in all conditions, wet or dry. The 13-gauge A3 cut protection liner is cut-, puncture-, and abrasion-resistant for the toughest environments. The reinforced thumb dip adds extra protection in a high-wear area. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The sandy nitrile dip provides an excellent grip for all conditions. These protective gloves are made from 13-gauge yarn that provides level 3 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. The Ergodyne ProFlex 7031 A3 nitrile-coated gloves are perfect for workers in construction, manufacturing, fabrication, service technicians, and material handling..CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE.Sandy nitrile dip provides an excellent grip for all conditions.Features ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A3, EN 420:2003+A1:2009, EN 388:2016 4X42C standards.Care instructions: machine-washable

The Ergodyne ProFlex 7031 nitrile-coated cut-resistant gloves are designed to provide durability and grip in all conditions, wet or dry. The 13-gauge A3 cut protection liner is cut-, puncture-, and abrasion-resistant for the toughest environments. The reinforced thumb dip adds extra protection in a high-wear area. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The sandy nitrile dip provides an excellent grip for all conditions. These protective gloves are made from 13-gauge yarn that provides level 3 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. The Ergodyne ProFlex 7031 A3 nitrile-coated gloves are perfect for workers in construction, manufacturing, fabrication, service technicians, and material handling..CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE.Sandy nitrile dip provides an excellent grip for all conditions.Features ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A3, EN 420:2003+A1:2009, EN 388:2016 4X42C standards.Care instructions: machine-washable

G-Tek MaxiFlex XL Ultimate seamless knit work gloves in dark gray/black color are designed to protect your hands from debris and dirt. Gloves offer resistant to chemicals, water and ultraviolet light..MicroFoam Nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance.Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves.Knit Wrist helps prevent dirt and debris from entering the glove.Silicone and Latex free.360° Breathability - Patented micro-foam nitrile coating offers 360° breathability, making it the most breathable glove on the market today.25% Thinner - Than most foam nitrile gloves on the market while offering twice the mechanical performance.Form, Fit and Feel - Mimics the "hand at rest", reducing hand fatigue and increasing comfort.Consistent Liner Penetration - From the nitrile, leaving only the soft liner resting against the skin.Latest Knitting Technology - Utilized to produce smooth and rounded fingertips, improving fingertip sensitivity.Optimized Grip - The micro-cup finish allows for a controlled grip.All ingredients used in the manufacturing and construction of this product are compliant with the REACH legislation.This glove has been laundered prior to final packaging making it clean and safe for use.The Oeko-Tex® Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin.The Skin Health Alliance has awarded professional dermatological accreditation following review of the scientific dossier behind this product.Complies with FDA food handling requirements 21 CFR, Part 177.This style is also available tri-folded and shrink-wrapped for carefree dispensing through vending machines (34-875V).EN 388 2016 RESULTS: 4131X.Designed and developed as a breathable glove, MaxiFlex® Ultimate™ has become the benchmark for precision handling in dry environments.

THERMAL PROTECTION - 13g HPPE with a soft 10g brushed acrylic fleece liner for comfort and warmth.CUT RESISTANT - ANSI A5 cut protection.WATERPROOF - Fully coated latex protects hands from water and cold air.SUPERIOR GRIP - Sandy, nitrile-dipped palm for secure gripping.DEXTERITY - Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.TESTED & APPROVED - Meets EN 388: 4X43E.MACHINE WASHABLE

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without bulk. These gloves are perfect for work in cold wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures, great for work in cold wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: S (7).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and an enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without the bulk. These gloves are perfect for work in cold, wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures; great for work in cold, wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: L (9).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

Protect hands in intense work environments with these large work gloves. The breathable design offers ventilation, preventing hands from getting sweaty for a more comfortable experience, while the durable material provides sturdy protection from punctures and abrasions. These G-Tek Active Grip seamless nylon-knit work gloves come 12 pairs per pack and have a nitrile coating, providing an excellent grip that works well in dry and wet conditions..Seamless knit nylon shell offers increased comfort, finger dexterity and breathability.Nitrile MicroSurface coatings are impermeable providing an elevated grip in dry and oily conditions, infused with thousands of tiny suction cup pockets that create a vacuum effect that dispenses fluids away on contact.Breathable glove shell.Washable, resistant to chemicals, water, and ultraviolet light.Knit Wrist helps prevent dirt and debris from entering the glove.Color coded hems for easy size identification.Also available in a Vend pack option (tri-folded & shrink-wrapped) for carefree dispensing through vending machines... 34-500V.EN 388 2016 RESULTS: 4121XX.Ideal for handling and assembly of parts and materials, equipment maintenance and repair, parts cleaning, and fastening and anchoring.

Protect hands in intense work environments with these large work gloves. The breathable design offers ventilation, preventing hands from getting sweaty for a more comfortable experience, while the durable material provides sturdy protection from punctures and abrasions. These G-Tek Active Grip seamless nylon-knit work gloves come 12 pairs per pack and have a nitrile coating, providing an excellent grip that works well in dry and wet conditions..Seamless knit nylon shell offers increased comfort, finger dexterity and breathability.Nitrile MicroSurface coatings are impermeable providing an elevated grip in dry and oily conditions, infused with thousands of tiny suction cup pockets that create a vacuum effect that dispenses fluids away on contact.Breathable glove shell.Washable, resistant to chemicals, water, and ultraviolet light.Knit Wrist helps prevent dirt and debris from entering the glove.Color coded hems for easy size identification.Also available in a Vend pack option (tri-folded & shrink-wrapped) for carefree dispensing through vending machines... 34-500V.EN 388 2016 RESULTS: 4121XX.Ideal for handling and assembly of parts and materials, equipment maintenance and repair, parts cleaning, and fastening and anchoring.

CUT RESISTANT – ANSI A7 cut protection and level 6 abrasion resistance for protection when working with incredibly sharp or jagged materials.INDUSTRY-LEADING ASX NITRILE – 20% better gripping performance than sandy nitrile, outperforms other coatings on all surfaces (wet, oily and dry).DUAL-LAYER COATING – Smooth nitrile layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.BREATHABLE – Smooth nitrile layer allows airflow to pass through surface coating.MAX PROTECTION, MAX COMFORT – 18-gauge seamless HPPE tungsten knit delivers incredibly high cut protection while remaining comfortably lightweight and flexible for maximum feel and minimal hand fatigue.SUPERIOR DURABILITY – Tested to the highest possible abrasion resistance (level 6) for work in rough environments.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.MACHINE WASHABLE.TESTED & APPROVED – ANSI A7 cut resistant, EN388: 4X44F, ANSI level 6 abrasion resistant, ANSI level 5 puncture resistant.VEND-READY - 12-pair option is shrink-wrapped for easy dispensing

Protect hands in intense work environments with these large work gloves. The breathable design offers ventilation, preventing hands from getting sweaty for a more comfortable experience, while the durable material provides sturdy protection from punctures and abrasions. These G-Tek Active Grip seamless nylon-knit work gloves come 12 pairs per pack and have a nitrile coating, providing an excellent grip that works well in dry and wet conditions..Seamless knit nylon shell offers increased comfort, finger dexterity and breathability.Nitrile MicroSurface coatings are impermeable providing an elevated grip in dry and oily conditions, infused with thousands of tiny suction cup pockets that create a vacuum effect that dispenses fluids away on contact.Breathable glove shell.Washable, resistant to chemicals, water, and ultraviolet light.Knit Wrist helps prevent dirt and debris from entering the glove.Color coded hems for easy size identification.Also available in a Vend pack option (tri-folded & shrink-wrapped) for carefree dispensing through vending machines... 34-500V.EN 388 2016 RESULTS: 4121XX.Ideal for handling and assembly of parts and materials, equipment maintenance and repair, parts cleaning, and fastening and anchoring.

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive industry.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: 2XL (11).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

These ProFlex 7501 coated winter work gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion resistance and enhanced grip without compromised dexterity. A double-lined interior, polyester topped with brushed acrylic fleece, keeps hands toasty and comfortable without bulk. These gloves are perfect for work in cold wet environments, including material handling and construction..Cut-resistant winter work gloves feature a dual layer for warm, waterproof protection in cold temperatures, great for work in cold wet environments, including material handling and construction.THERMAL PROTECTION – 15g polyester with a soft 10g brushed acrylic fleece liner for comfort and warmth.Size: M (8).12 pairs of gloves per pack.WATERPROOF – Fully coated latex protects hands from water and cold air.SUPERIOR GRIP – Sandy, nitrile-dipped palm for secure gripping.Dual layer of latex and nitrile remains flexible in cold weather for easy handling of equipment and materials.Certifications and standards: Meets or exceeds EN 388:2131X standard.Care instructions: machine-washable

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: S (7).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant

CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for harsh work environments. These nitrile-coated gloves also feature ANSI Level 4 abrasion resistance for long wear. The DSX nitrile dip technology provides an unbeatable grip in dry environments. This special grip technology is abrasion-resistant and outperforms all nitrile-based dips in dry environments. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides Level 2 cut protection with dexterity and comfort. Touch-screen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive.These protective gloves are made with high-performance polyethylene (HPPE) fibers; come in high-visibility lime color.Size: L (9).12 pairs of gloves per pack.18-gauge yarn provides Level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touch-screen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI Level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant

The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive industry.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: XL (10).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable

7022 L Lime ANSI A2 Coated CR Gloves DSX.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – DSX nitrile coated palms for optimal grip and dexterity with dry surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 3 puncture resistant

The ProFlex 7041 high-visibility nitrile-coated level 4 cut-resistant gloves are designed with two types of technology to create the comfortable, breathable, and excellent gripping. This knit work glove is made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight, with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface making these firm-grip gloves stand out especially in oily and wet conditions..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards

7022 XL Lime ANSI A2 Coated CR Gloves DSX.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – DSX nitrile coated palms for optimal grip and dexterity with dry surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 3 puncture resistant

7021 XL Lime Hi-Vis Nitrile Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant

The Ergodyne ProFlex 7041 high-visibility nitrile-coated Level 4 cut-resistant gloves are designed with two types of technology to create comfortable, breathable, and excellent gripping. These knit work gloves are made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight and increase visibility with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface, making these firm-grip gloves stand out, especially in oily and wet conditions. The water-based polyurethane (PU) coating combined with nitrile dip allows for maximum dexterity and significantly relieves hand fatigue while ensuring durability..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards