Grippy Gloves
200 results
The ProFlex 7041 high-visibility nitrile-coated level 4 cut-resistant gloves are designed with two types of technology to create the comfortable, breathable, and excellent gripping. This knit work glove is made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight, with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface making these firm-grip gloves stand out especially in oily and wet conditions..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards
G-Tek MaxiFlex Large Ultimate knit work gloves in dark gray/black color are designed to protect your hands from debris and dirt. Gloves offer resistant to chemicals, water and ultraviolet light..MicroFoam Nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance.Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves.Knit Wrist helps prevent dirt and debris from entering the glove.Silicone and Latex free.360° Breathability - Patented micro-foam nitrile coating offers 360° breathability, making it the most breathable glove on the market today.25% Thinner - Than most foam nitrile gloves on the market while offering twice the mechanical performance.Form, Fit and Feel - Mimics the "hand at rest", reducing hand fatigue and increasing comfort.Consistent Liner Penetration - From the nitrile, leaving only the soft liner resting against the skin.Latest Knitting Technology - Utilized to produce smooth and rounded fingertips, improving fingertip sensitivity.Optimized Grip - The micro-cup finish allows for a controlled grip.All ingredients used in the manufacturing and construction of this product are compliant with the REACH legislation.This glove has been laundered prior to final packaging making it clean and safe for use.The Oeko-Tex® Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin.The Skin Health Alliance has awarded professional dermatological accreditation following review of the scientific dossier behind this product.Complies with FDA food handling requirements 21 CFR, Part 177.This style is also available tri-folded and shrink-wrapped for carefree dispensing through vending machines (34-875V).EN 388 2016 RESULTS: 4131X.Designed and developed as a breathable glove, MaxiFlex® Ultimate™ has become the benchmark for precision handling in dry environments.
7021 XL Lime Hi-Vis Nitrile Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant
The ProFlex 7041 high-visibility nitrile-coated level 4 cut-resistant gloves are designed with two types of technology to create the comfortable, breathable, and excellent gripping. This knit work glove is made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight, with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface making these firm-grip gloves stand out especially in oily and wet conditions..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards
The Ergodyne ProFlex 7041 high-visibility nitrile-coated Level 4 cut-resistant gloves are designed with two types of technology to create comfortable, breathable, and excellent gripping. These knit work gloves are made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight and increase visibility with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface, making these firm-grip gloves stand out, especially in oily and wet conditions. The water-based polyurethane (PU) coating combined with nitrile dip allows for maximum dexterity and significantly relieves hand fatigue while ensuring durability..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards
7021 L Lime Hi-Vis Nitrile Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant
7021 S Lime Hi-Vis Nitrile Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant
The GoFit Pro Trainer Wrist Wrap Gloves in Large have an advanced ergonomic, padded palm with silicone Go-Tac Grip and Super Grit Grip between the thumb and forefinger for durable comfort and maximum gripping power. Superior high-performance materials and progressive design help reduce hand fatigue and make these gloves first-rate in the GoFit glove lineup. * Before beginning any weight loss or exercise program, you should consult with your physician..Synthetic leather etched wrist wrap with adjustable VELCRO closure.Leather palm with ergonomic, silicone Go-Tac Grip.Super Grit Grip on forefinger and thumb for maximum gripping power.4-way stretch material between fingers for comfortable, secure fit.Vented jersey back with soft suede sweat wipe.Reinforced, double-stitched, leather fingers.Finger pull tab for easy removal.Large
Smooth Surface Handling Gloves: Super-tacky silicone gripping palm for handling boxes, etc..Hex-silicone palm pattern for super-tacky grip on dry, smooth surfaces such as boxes and cartons.Wrapped index finger for enhanced control.Breathable poly mesh construction.Low-profile molded hook and loop closure with ID space.Pull-on tab for easy on/off.EN 388: 2131.Size: Medium
The Ergodyne ProFlex 7022 high-visibility nitrile-coated cut-resistant gloves with DSX dip technology are designed to provide unmatched grip in dry conditions. The 18-gauge A2 cut protection liner offers cut, puncture, and abrasion resistance for the harshest work environments. These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear. The DSX technology is a multilayer dip that allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. These protective gloves are made from 18-gauge yarn that provides level 2 cut protection with dexterity and comfort. Gauge is the number of rows of stitches per inch, and the higher the gauge, the less bulk and greater dexterity there is. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity..Cut-resistant gloves are perfect for workers in construction, assembly, plumbing, automotive industry.These protective gloves are made with high-performance polyethylene (HPPE) fibers, come in high-visibility lime color with black accents.Size: M (8).12 pairs of gloves per pack.18-gauge yarn provides level 2 cut protection with dexterity and comfort.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 4 abrasion resistance for long wear.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds ANSI A2, EN 420:2003+A1:2009, EN 388:2016 4342B standards.Care instructions: machine-washable
Protect hands in intense work environments with these large work gloves. The breathable design offers ventilation, preventing hands from getting sweaty for a more comfortable experience, while the durable material provides sturdy protection from punctures and abrasions. These G-Tek Active Grip seamless nylon-knit work gloves come 12 pairs per pack and have a nitrile coating, providing an excellent grip that works well in dry and wet conditions..Seamless knit nylon shell offers increased comfort, finger dexterity and breathability.Nitrile MicroSurface coatings are impermeable providing an elevated grip in dry and oily conditions, infused with thousands of tiny suction cup pockets that create a vacuum effect that dispenses fluids away on contact.Breathable glove shell.Washable, resistant to chemicals, water, and ultraviolet light.Knit Wrist helps prevent dirt and debris from entering the glove.Color coded hems for easy size identification.Also available in a Vend pack option (tri-folded & shrink-wrapped) for carefree dispensing through vending machines... 34-500V.EN 388 2016 RESULTS: 4121XX.Ideal for handling and assembly of parts and materials, equipment maintenance and repair, parts cleaning, and fastening and anchoring.
The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for top-of-the-line dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a perfect fit. This multilayer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are great for workers in assembly, manufacturing, automotive industry and service technicians. Perfect for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive industry and service technicians; perfect for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend, come in black.Size: 2XL (11).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable
7041 2XL Lime ANSI A4 Nitrile-Coated CR Gloves.CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards
CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant
The GoFit Pro Trainer Wrist Wrap Gloves in Medium have an advanced ergonomic, padded palm with silicone Go-Tac Grip and Super Grit Grip between the thumb and forefinger for durable comfort and maximum gripping power. Superior high-performance materials and progressive design help reduce hand fatigue and make these gloves first-rate in the GoFit glove lineup. * Before beginning any weight loss or exercise program, you should consult with your physician..Synthetic leather etched wrist wrap with adjustable VELCRO closure.Leather palm with ergonomic, silicone Go-Tac Grip.Super Grit Grip on forefinger and thumb for maximum gripping power.4-way stretch material between fingers for comfortable, secure fit.Vented jersey back with soft suede sweat wipe.Reinforced, double-stitched, leather fingers.Finger pull tab for easy removal.Medium
7031 2XL Gray ANSI A3 Nitrile-Coated CR Gloves.CUT RESISTANT – ANSI A3 cut protection and level 5 abrasion resistance for protection from cuts, punctures and abrasions.HIGH STRENGTH GRIP – Durable sandy nitrile coated palms and thumbs for secure handling on rough surfaces and materials.COMFORTABLE FORM FIT – 13-gauge HPPE nylon-spandex knit with nitrile coating moves with you for enhanced dexterity and minimal hand fatigue.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 cut resistant, EN388: 4X42C, ANSI level 5 abrasion resistant, ANSI level 3 puncture resistant.MACHINE WASHABLE
The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for top-of-the-line dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a perfect fit. This multilayer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are great for workers in assembly, manufacturing, automotive industry and service technicians. Perfect for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive industry and service technicians; perfect for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend, come in black.Size: XL (10).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable
The ProFlex 7041 high-visibility nitrile-coated level 4 cut-resistant gloves are designed with two types of technology to create the comfortable, breathable, and excellent gripping. This knit work glove is made with high-performance polyethylene (HPPE) fibers for superior A4 cut protection. The WSX dip combined with TenaLux yarn makes these palm-coated gloves cool to the touch with 360-degree breathability. They are lightweight, with the high-visibility color on the backside of the hand. The liquid-resistant special coating absorbs and wicks moisture from the surface making these firm-grip gloves stand out especially in oily and wet conditions..CUT RESISTANT – ANSI A4 cut protection and level 4 abrasion resistance for protection when working with sharp materials.COOL, BREATHABLE COMFORT – Form-fitting TenaLux yarn, made without irritating glass or steel, provides 360-degree breathability with a cool-to-the-touch feel.STRONG NO-SLIP GRIP – WSX nitrile coated palm for optimal grip with wet/oily surfaces and materials.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – PU coating wicks sweat and allows airflow to pass through nitrile surface coating.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 4 cut resistant, EN388: 4X42D, ANSI level 4 abrasion resistant, ANSI level 3 puncture resistant.TESTED – Meets EN 388: 4X42D and ANSI/ISEA 105-2016 level A4 cut resistant, level 4 abrasion resistant and level 3 puncture resistant standards
The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide an excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for perfect dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI Level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a fit like no other. The DSX nitrile dip technology outperforms all nitrile-based dips in dry environments. This multi-layer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touch-screen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are perfect for workers in assembly, manufacturing, automotive, and service technicians. Great for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive, and service technicians; great for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend; come in black.Size: L (9).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touch-screen capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI Level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable
7021 M Lime Hi-Vis Nitrile Coated CR Gloves.CUT RESISTANT – ANSI A2 cut protection and level 3 abrasion resistance for protection when working with sharp materials.STRONG NO-SLIP GRIP – WSX nitrile coated palms for optimal grip with wet/oily surfaces and materials.SUPERIOR FEEL & FIT – 18-gauge seamless HPPE nylon-spandex knit with WSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – PU layer + anti-slip sandy nitrile layer for ultimate water wicking grip performance, comfort and durability.NO SWEAT PALMS – Breathable PU coating wicks sweat and allows airflow to pass through nitrile surface coating.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.HI-VIS COLOR – For enhanced safety and visibility.MACHINE WASHABLE.TESTED & APPROVED – ANSI level 2 cut resistant, EN388: 4342B, ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant
The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for top-of-the-line dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a perfect fit. This multilayer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are great for workers in assembly, manufacturing, automotive industry and service technicians. Perfect for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive industry and service technicians; perfect for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend, come in black.Size: S (7).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable
Memphis Gloves® Ninja® coated gloves in grey/red color feature crinkle latex coating for flexibility and elasticity. Nylon gloves with knit-wrist cuff are ideal for industrial or warehouse works..Coated gloves.Latex.Nylon.Medium.Gray/red/hem white.1 pair.Cuff Knitted, knit wrist.7.85"(H) x 4.39"(W) x 3.00"(D).Application: Abrasive applications, assembly, brick handling, construction, farming, general maintenance, landscaping, plumbing, recycling, shipping / receiving.Lining: Nylon.Dots-blocks-coatings: Coated palm.CE: 3 abrasion, 1 cut, 3 tear, 1 puncture.Palm: Textured grip.Glove line offers the greatest assortment of dexterity, sense of touch and protection.FDA, CE approval.Weight: 2.125 lbs..Industrial and warehouse work gloves for many applications
7001 S Black Nitrile Coated Gloves.ABRASION RESISTANT – ANSI level 3 abrasion resistance for durable protection when working with rough materials.STRONG NO-SLIP GRIP – Durable DSX nitrile coated palms for optimal grip with dry surfaces and materials.SUPERIOR FIT, FEEL & DEXTERITY – 18-gauge seamless nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant, EN388: 4121X.MACHINE WASHABLE
The GoFit Pro Trainer Wrist Wrap Gloves in X-Large have an advanced ergonomic, padded palm with silicone Go-Tac Grip and Super Grit Grip between the thumb and forefinger for durable comfort and maximum gripping power. Superior high-performance materials and progressive design help reduce hand fatigue and make these gloves first-rate in the GoFit glove lineup. * Before beginning any weight loss or exercise program, you should consult with your physician..Synthetic leather etched wrist wrap with adjustable VELCRO closure.Leather palm with ergonomic, silicone Go-Tac Grip.Super Grit Grip on forefinger and thumb for maximum gripping power.4-way stretch material between fingers for comfortable, secure fit.Vented jersey back with soft suede sweat wipe.Reinforced, double-stitched, leather fingers.Finger pull tab for easy removal.X-Large
7001 2XL Black Nitrile Coated Gloves.ABRASION RESISTANT – ANSI level 3 abrasion resistance for durable protection when working with rough materials.STRONG NO-SLIP GRIP – Durable DSX nitrile coated palms for optimal grip with dry surfaces and materials.SUPERIOR FIT, FEEL & DEXTERITY – 18-gauge seamless nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant, EN388: 4121X.MACHINE WASHABLE
The GoFit Men's Pro Trainer Gloves in X-Large offers durable comfort and maximum gripping power with advanced ergonomic, padded Go-Tac palm, and Super Grit Grip between the thumb and forefinger. Superior high-performance materials and progressive design helps reduce hand fatigue, and makes these gloves first-rate in the GoFit glove line. * Before beginning any weight loss or exercise program, you should consult with your physician..Synthetic leather palm with ergonomic, silicone Go-Tac grip.Vented jersey back with soft suede thumb wipe.Reinforced, double-stitched, synthetic leather fingers.Durable VELCRO closure and easy-on pull tab.Finger pull tab for easy removal.Super Grit Grip for maximum gripping power.4-way stretch material between fingers for comfortable, secure fit.X-Large
Grip securely in wet and dry conditions by using these gloves with a latex crinkle coating. Featuring a cotton and polyester knit shell, these gloves are comfortable and flexible. These G-Tek medium-sized gloves are resistant to chemicals, water and UV light..Seamless knit polyester shell is comfortable and flexible.Breathable glove shell.Latex crinkle coatings feature creases or wrinkles on the surface of the coating that are designed to channel fluids away allowing better contact on dry or wet surfaces – a natural rubber that is flexible, tough and durable due to its high degree of resistance to snagging, puncture, and abrasion.Ergonomic shaped curved finger pattern.Knit Wrist helps prevent dirt and debris from entering the glove.Color coded hems for easy size identification.EN 388 2016 RESULTS: 2142X.Ideal for handling and cleanup of abrasive parts and materials, demolition, masonry and tile, metal fastening, and assembly.
This pair of Small GoFit Women's Pro Trainer Gloves in Green offers durable comfort and maximum gripping power with advanced ergonomic, padded Go-Tac palm, and Super Grit Grip between the thumb and forefinger. Superior high-performance materials and progressive design helps reduce hand fatigue, and makes these gloves first-rate in the GoFit glove line. * Before beginning any weight loss or exercise program, you should consult with your physician..Synthetic leather palm with ergonomic, silicone Go-Tac Grip.Super Grit Grip for maximum gripping power.4-way stretch material between fingers for comfortable, secure fit.Vented jersey back with soft suede sweat-wipe thumb.Reinforced, double-stitched, synthetic leather fingers.Durable VELCRO closure and easy-on pull tab.Finger pull tab for easy removal.Green/Small
Used in electronic and computer assembly, quality control, inspection and general assembly..Seamless knit nylon shell offers increased comfort, finger dexterity and breathability.Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling.Knit Wrist helps prevent dirt and debris from entering the glove.Breathable back for comfort.Pair packed for ease of distribution.Silicone free.This style is also available tri-folded and shrink-wrapped for carefree dispensing through vending machines (33-G125V).EN 388 2016 RESULTS: 4131X.Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves.Color: Gray.⚠ WARNING: Cancer - www.P65Warnings.ca.gov.Seamless knit nylon shell offers increased comfort, finger dexterity and breathability. Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
Molded TPR armor for impact protection, pinch injury prevention, and blow deflection.Finger TPR extends to fingertips; sewn on for maximum durability and wear.Patented “flex zones” reduce hand fatigue.Abrasion resistant sandy foam nitrile dipped palm.Applications: Oil/Gas Drilling, Extraction and Refining, Fracking, Tool Pushing, Mining, Demolition, Heavy Construction, Cargo Handling, Mechanics.13-gauge High Performance Polyethylene (HPPE) seamless knit construction delivers EN Level 5 cut protection, Level 3 puncture protection and excellent durability.Color-coded cuff denotes glove sizing.Size Large.EN 420; EN 388: 4543; ASTM F1790 4.⚠ WARNING: Cancer WWW.P65WARNINGS.CA.GOV
This glove line offers the greatest assortment of dexterity, sense of touch and protection..Coated gloves.Made with latex and nylon.Size: Small.Red/Gray/hem white.12 pairs.Cuff Knitted, knit wrist.8.25"(H) x 4.75"(W) x 3.25"(D).Application: Abrasive applications, assembly, brick handling, construction, farming, general maintenance, landscaping, plumbing, recycling, shipping / receiving.Dots-blocks-coatings: Coated palm.CE: 3 abrasion, 1 cut, 3 tear, 1 puncture.Palm: Textured grip.FDA, CE approval
Molded TPR armor for impact protection, pinch injury prevention, and blow deflection.Finger TPR extends to fingertips; sewn on for maximum durability and wear.Patented “flex zones” reduce hand fatigue.Abrasion resistant sandy foam nitrile dipped palm.Applications: Oil/Gas Drilling, Extraction and Refining, Fracking, Tool Pushing, Mining, Demolition, Heavy Construction, Cargo Handling, Mechanics.13-gauge High Performance Polyethylene (HPPE) seamless knit construction delivers EN Level 5 cut protection, Level 3 puncture protection and excellent durability.Color-coded cuff denotes glove sizing.Size X-Large.EN 420; EN 388: 4543; ASTM F1790 4.⚠ WARNING: Cancer WWW.P65WARNINGS.CA.GOV
7001 L Black Nitrile Coated Gloves.ABRASION RESISTANT – ANSI level 3 abrasion resistance for durable protection when working with rough materials.STRONG NO-SLIP GRIP – Durable DSX nitrile coated palms for optimal grip with dry surfaces and materials.SUPERIOR FIT, FEEL & DEXTERITY – 18-gauge seamless nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant, EN388: 4121X.MACHINE WASHABLE
The GoFit Men's Pro Trainer Gloves in Large offers durable comfort and maximum gripping power with advanced ergonomic, padded Go-Tac palm, and Super Grit Grip between the thumb and forefinger. Superior high-performance materials and progressive design helps reduce hand fatigue, and makes these gloves first-rate in the GoFit glove line. * Before beginning any weight loss or exercise program, you should consult with your physician..Synthetic leather palm with ergonomic, silicone Go-Tac grip.Vented jersey back with soft suede thumb wipe.Reinforced, double-stitched, synthetic leather fingers.Durable VELCRO closure and easy-on pull tab.Finger pull tab for easy removal.Super Grit Grip for maximum gripping power.4-way stretch material between fingers for comfortable, secure fit.Large
This pair of Medium GoFit Women's Pro Trainer Gloves in Green offers durable comfort and maximum gripping power with advanced ergonomic, padded Go-Tac palm, and Super Grit Grip between the thumb and forefinger. Superior high-performance materials and progressive design helps reduce hand fatigue, and makes these gloves first-rate in the GoFit glove line. * Before beginning any weight loss or exercise program, you should consult with your physician..Synthetic leather palm with ergonomic, silicone Go-Tac Grip.Super Grit Grip for maximum gripping power.4-way stretch material between fingers for comfortable, secure fit.Vented jersey back with soft suede sweat-wipe thumb.Reinforced, double-stitched, synthetic leather fingers.Durable VELCRO closure and easy-on pull tab.Finger pull tab for easy removal.Green/Medium
The Ergodyne ProFlex 7001 nitrile-coated gloves with DSX dip technology are designed to provide excellent grip in dry conditions. These nitrile-dipped gloves offer a close, second-skin fit for top-of-the-line dexterity and comfort when working with small parts in manufacturing or assembly. This soft, flexible fit is thanks to 18-gauge seamless ANSI level 2 abrasion-resistant nylon plus spandex knit blend. The thin knit of these protective gloves allows for unmatched breathability and a perfect fit. This multilayer dip allows air to flow through to keep hands comfortable and dry. The top layer dip has a highly abrasion-resistant coating for durability and longer life. Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity. The Ergodyne ProFlex 7001 nitrile-coated DSX safety gloves are great for workers in assembly, manufacturing, automotive industry and service technicians. Perfect for applications involving small parts or tasks requiring dexterity..General-purpose gloves are perfect for workers in assembly, manufacturing, automotive industry and service technicians; perfect for applications involving small parts or tasks requiring dexterity.These safety gloves are made of nylon and spandex knit blend, come in black.Size: M (8).12 pairs of gloves per pack.Ultra-lightweight owing to 18-gauge seamless knit for ultimate dexterity.DSX dip technology provides perfect grip in dry conditions.Touchscreen-capable fingertips on these abrasion-resistant gloves allow workers to stay connected and protected while maximizing productivity.These nitrile-coated gloves also feature ANSI level 2 abrasion resistance.Seamless knit wrist prevents dirt and debris from entering the glove.Certifications and standards: Meets or exceeds EN 420:2003+A1:2009, EN 388:2016 4121X standards.Care instructions: machine-washable
7001 M Black Nitrile Coated Gloves.ABRASION RESISTANT – ANSI level 3 abrasion resistance for durable protection when working with rough materials.STRONG NO-SLIP GRIP – Durable DSX nitrile coated palms for optimal grip with dry surfaces and materials.SUPERIOR FIT, FEEL & DEXTERITY – 18-gauge seamless nylon-spandex knit with DSX coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue.DUAL-LAYER COATING – Two layers of smooth abrasion-resistant nitrile for enhanced durability.TOUCHSCREEN CAPABLE – Easily swipe, tap and type on smartphones and tablets without removing gloves.LONG SEAMLESS KNIT CUFFS – Fit snug to wrists to extend protection while keeping dirt and debris out.TESTED & APPROVED – ANSI level 3 abrasion resistant, ANSI level 2 puncture resistant, EN388: 4121X.MACHINE WASHABLE
Grip securely in wet and dry conditions by using these gloves with a latex crinkle coating. Featuring a cotton and polyester knit shell, these gloves are comfortable and flexible. These G-Tek medium-sized gloves are resistant to chemicals, water and UV light..Seamless knit polyester shell is comfortable and flexible.Breathable glove shell.Latex crinkle coatings feature creases or wrinkles on the surface of the coating that are designed to channel fluids away allowing better contact on dry or wet surfaces – a natural rubber that is flexible, tough and durable due to its high degree of resistance to snagging, puncture, and abrasion.Ergonomic shaped curved finger pattern.Knit Wrist helps prevent dirt and debris from entering the glove.Color coded hems for easy size identification.EN 388 2016 RESULTS: 2142X.Ideal for handling and cleanup of abrasive parts and materials, demolition, masonry and tile, metal fastening, and assembly.
Looking to do some serious training? The Large GoFit Men's Xtrainer Cross-Training Gloves have an advanced, ergonomic palm design with padded palm pressure points, offering great comfort with a confident grip. Durable, high-performance materials and progressive design make the Xtrainer Glove, with ergonomic palm a superior entry-level glove in the GoFit glove line. * Before beginning any weight loss or exercise program, you should consult with your physician..Padded pressure points—etched, synthetic leather.Durable, high-performance materials.Double stitched throughout.Easy-on-off finger tab and pull loop.Thermal regulating mesh back.Heavy-duty VELCRO closure.Large
Size: X-large.1 Pair.Breathable spandex allows for lasting comfort.Patented silicone-fused palm for super-tacky grip.Airprene knuckle impact protection.Package-Handling Gloves.Primary material: Silicone.Hand Specific.Ideal for use when handling glass, metals, ceramics, baggage, and working hand or power tools.Good for handling glass, metals and ceramics and for working with power tools, as well as providing a steady grip while toting packages.
Used in electronic and computer assembly, quality control, inspection and general assembly..Seamless knit nylon shell offers increased comfort, finger dexterity and breathability.Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling.Knit Wrist helps prevent dirt and debris from entering the glove.Breathable back for comfort.Pair packed for ease of distribution.Silicone free.This style is also available tri-folded and shrink-wrapped for carefree dispensing through vending machines (33-G125V).EN 388 2016 RESULTS: 4131X.Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves.Color: Gray.⚠ WARNING: Cancer - www.P65Warnings.ca.gov.Seamless knit nylon shell offers increased comfort, finger dexterity and breathability. Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
Smooth Surface Handling Gloves: Super-tacky silicone gripping palm for handling boxes, etc..Hex-silicone palm pattern for super-tacky grip on dry, smooth surfaces such as boxes and cartons.Wrapped index finger for enhanced control.Breathable poly mesh construction.Low-profile molded hook and loop closure with ID space.Pull-on tab for easy on/off.EN 388: 2131.Size: Small
Grip securely in wet and dry conditions by using these gloves with a latex crinkle coating. Featuring a cotton and polyester knit shell, these gloves are comfortable and flexible. These G-Tek medium-sized gloves are resistant to chemicals, water and UV light..Seamless knit polyester shell is comfortable and flexible.Breathable glove shell.Latex crinkle coatings feature creases or wrinkles on the surface of the coating that are designed to channel fluids away allowing better contact on dry or wet surfaces – a natural rubber that is flexible, tough and durable due to its high degree of resistance to snagging, puncture, and abrasion.Ergonomic shaped curved finger pattern.Knit Wrist helps prevent dirt and debris from entering the glove.Color coded hems for easy size identification.EN 388 2016 RESULTS: 2142X.Ideal for handling and cleanup of abrasive parts and materials, demolition, masonry and tile, metal fastening, and assembly.
Doing some serious training? The GoFit Men's Sport-Tac Pro Trainer Gloves in Large offer durable comfort with a confident grip. * Before beginning any weight loss or exercise program, you should consult with your physician..Sport-Tac palm for superior gripping.Synthetic leather palm for durability.Reinforced, Sport-Tac thumb and forefinger for better grip.Reinforced stitching on fingers.Terry cloth thumb.Neoprene knuckle panel for increased flexibility.4-way stretch back for superior comfort.Pull-tab finger for easy removal.Adjustable, VELCRO closure.Easy-on finger loop.Black/Red.Large
Grip securely in wet and dry conditions by using these gloves with a latex crinkle coating. Featuring a cotton and polyester knit shell, these gloves are comfortable and flexible. These G-Tek medium-sized gloves are resistant to chemicals, water and UV light..Seamless knit polyester shell is comfortable and flexible.Breathable glove shell.Latex crinkle coatings feature creases or wrinkles on the surface of the coating that are designed to channel fluids away allowing better contact on dry or wet surfaces – a natural rubber that is flexible, tough and durable due to its high degree of resistance to snagging, puncture, and abrasion.Ergonomic shaped curved finger pattern.Knit Wrist helps prevent dirt and debris from entering the glove.Color coded hems for easy size identification.EN 388 2016 RESULTS: 2142X.Ideal for handling and cleanup of abrasive parts and materials, demolition, masonry and tile, metal fastening, and assembly.
AMMEX® Gloveworks® HD Orange Nitrile Powder Free Industrial Gloves are designed and engineered to handle the toughest jobs. Their raised diamond texture provides an unbeatable grip by channeling away liquids. Excellent puncture and chemical resistance.8-mil extra thick for added strength, durability, greater resistance to rips, tears, and punctures, and provides for extended-duration use.Raised Diamond Texture (RDT) for a superior grip.Feature extra protection from grease, gasoline, pesticides, cleaning solutions, and a long list of specialty chemicals.100 gloves per box.They’re made from component materials that comply with FDA regulations for food contact, which makes them perfect for food processing applications.Palm thickness: 8 mil.Finger thickness: 9 mil
Used in electronic and computer assembly, quality control, inspection and general assembly..Seamless knit nylon shell offers increased comfort, finger dexterity and breathability.Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling.Knit Wrist helps prevent dirt and debris from entering the glove.Breathable back for comfort.Pair packed for ease of distribution.Silicone free.This style is also available tri-folded and shrink-wrapped for carefree dispensing through vending machines (33-G125V).EN 388 2016 RESULTS: 4131X.Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves.Color: Gray.⚠ WARNING: Cancer - www.P65Warnings.ca.gov.Seamless knit nylon shell offers increased comfort, finger dexterity and breathability. Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
The GoFit Men's Pro Trainer Gloves in Medium offers durable comfort and maximum gripping power with advanced ergonomic, padded Go-Tac palm, and Super Grit Grip between the thumb and forefinger. Superior high-performance materials and progressive design helps reduce hand fatigue, and makes these gloves first-rate in the GoFit glove line. * Before beginning any weight loss or exercise program, you should consult with your physician..Synthetic leather palm with ergonomic, silicone Go-Tac grip.Vented jersey back with soft suede thumb wipe.Reinforced, double-stitched, synthetic leather fingers.Durable VELCRO closure and easy-on pull tab.Finger pull tab for easy removal.Super Grit Grip for maximum gripping power.4-way stretch material between fingers for comfortable, secure fit.Medium