HDMI Transmitter and Receiver Kits

Wireless HDMI A/V Transmitter With Receiver Kit Wireless Uncompressed Full HD 1080p A/V Streaming With 3D Support Up To 30ft; Connects & Wirelessly Transmits Content From A Notebook, Game Console, Blu-ray ™/DVD Player Or Set-top Box/DVR/cable Box; Supports 5.1-channel Digital Audio; Resolutions: 480p, 720p, 1080i & 1080p; No Software Or Driver Installation Needed; Low Latency.Wireless HDMI A/V transmitter with receiver kit wireless uncompressed full HD 1080p A/V streaming with 3D support up to 30ft.Connects & wirelessly transmits content from a notebook, game console, Blu-ray ™/DVD player or set-top box/DVR/cable box.Supports 5.1-channel digital audio.Resolutions: 480p, 720p, 1080i & 1080p.No software or driver installation needed.Low latency.Maximum video resolution: 1280 x 720, HD movie mode, Video format: NTSC/PAL.ISO sensitivity: Auto, 80-3200, Shutter speed: 1 - 1/2000 sec, 15 - 1 sec in bulb mode, Frame rate: 2997 fps, Aperture: F/36 (W) - 7 (T).White balance modes: Auto, Cloudy, Custom, Daylight, Fluorescent, Fluorescent H, Tungsten, Self timer: 10 sec/2 sec.One 36 VDC, 800 mAh NB-11L rechargeable lithium-ion battery offers extended recording and playback time.Image format: JPEG, Aspect ratio: 16:9, Maximum image resolution: 5152 x 3864.Connectivity: Wireless LAN.Features built-in flash, auto/flash on/off/slow sync flash modes and supports SD/SDHC/SDXC memory card and face detection.Auto, face self-timer, fireworks, fish-eye effect, long exposure, miniature effect, super vivid & toy camera effect shooting modes for fine-tuning.Operating temperature: 32 - 104 deg F, Humidity: 10 - 90 percent.Includes wrist strap WS-800, battery pack NB-11L, battery charger CB-2LF and leaflet getting started.Wireless HDMI A/V Transmitter With Receiver Kit Wireless Uncompressed Full HD 1080p A/V Streaming With 3D Support Up To 30ft; Connects & Wirelessly Transmits Content From A Notebook, Game Console, Blu-ray ™/DVD Player Or Set-top Box/DVR/cable Box; Supports 5. 1-channel Digital Audio; Resolutions: 480p, 720p, 1080i & 1080p; No Software Or Driver Installation Needed; Low Latency

The Tripp Lite 3' black DisplayPort to HDMI over Cat5/Cat6 active extender transmitter and receiver kit is perfect for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where it requires video projection. Using this extender, deliver a high-definition 1080i signal at 60 Hz up to 150' and a 1080p signal at 60 Hz up to 125'. The receiver has built-in cables that connect transmitter to DisplayPort source and receiver to HDMI display. This plug-and-play extender kit works with all operating systems. It has one DisplayPort male, one 19-pin HDMI male, two RJ45 female and two micro-USB B female ends for reliable connectivity..Active extender is perfect for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications.Cable length: 3'.Connections: One DisplayPort male, 19-pin HDMI male, two RJ45 female, two micro USB B female.Features 24 AWG gauge, solid wire for better conductivity.Comes in black color.Connectivity technology: Wired, Transfer distance: 150' max, Media type supported: Twisted pair Category 5/Category 6.Maximum resolution supported: 1920 x 1080, Graphics modes: Full HD.Supports 24-bit true color (8 bits per channel) and stereo audio, plug-and-play engineering.Built-in cables effectively connects transmitter to display port source and receiver to HDMI display.Green and orange LEDs indicator indicates receiving power and sharing a signal.Contains transmitter unit, receiver unit, two USB micro-B cables and owner's manual.TAA and RoHS Compliant.Comes with 1 year limited warranty

Overview HDMI over IP Matrix - Encoder (TX), transmits 4K@60Hz HDMI signal up to 394Ft (120m) over a single Cat6/7 cable, PoE, One to One, One to Many, Multi-casting, Video Wall, KVM, 18Gbps, HDCP 2.2, HDR 10, 7.1ch, Bi-directional IR, RS-232 Control, TAA Compliant, Kit (CE-H28A11-S1), Decoder (RX) (CE-H27G11-S1) Features Flexible matrix function to extend HDMI HDMI audio/video signals to the remote displays/monitors over UTP Cat6/7 cable up to 394ft (120m) and send the 4K@60Hz Ultra HD HDR resolution to the receiver for stable transmission and cost saving. Allows multiple receivers to be used simultaneously in multiple configurations Highly Scalable Works as a scalable TX/RX matrix over the dedicated IP network and extends/splits HDMI signals to multiple displays. Allows up to 65,536 total units, limited to 1,023 transmitter units, the additional Encoder (TX)unit (CE-H27F11-S1), Decoder (RX)unit (part#- CE-H27G11-S1), and Kit (part#- CE-H28A11-S1) are sold separately PoE Technology Allows the power supply connected to either the TX or RX unit by Ethernet port to power both units, making it easy to construct and improve system robustness. No additional power adapter required Long Distance This 4K 60Hz HDMI over IP Matrix Kit is designed for reliably extend HDMI signals up to 394ft (120m) to remote HDMI displays through Gigabit Ethernet network and Gigabit Ethernet switch 4K UHD Resolution Supports Ultra High-Definition video resolution up to 4K (4096x2160) @60Hz HDCP 2.2, 4:4:4, HDR 10, Deep Color and 3D. Image rotation supports clockwise 90°, 180°, and 270° in video wall only IR Extension/RS-232 Control Bi-directional IR pass back function and RS-232 control source devices from remote RX locations, allowing you to select and switch between HDMI source devices High Performance Offers a true 18Gbps video bandwidth and supports 7.1-ch surround sound Extract Audio Audio extraction via digital PDIF (Toslink), 3.5mm stereo audio, or HDMI output ports. Digital PDIF audio format: PCM 2.0, Dolby 5.1, and DTS 5.1; 3.5mm stereo audio format: PCM 2.0; HDMI audio format: PCM 2.0/5.1/7.1, Dolby 5.1/7.1, and DTS 5.1/7.1 Multiple Connectivity Ports Comes with one HDMI video input port, one USB-B 2.0 port for Host- WebCam, one USB-B 2.0 port for Host-KM and flash drive, one Gigabit Ethernet network port, one 3.5mm IR emitter port, one 3.5mm IR receiver port, one 3.5mm microphone jack, one 3.5mm audio jack, one PDIF output port, one DIP switch for video channel selection, one RS-232 port for control, one DC power jack (5V/2A).1080p supported video mode for optimal viewing brilliance and efficiency.4096 x 2160 maximum video resolution for a spectacular, sharp display with added reliability.HDMI in allows convenient transfer of content and data to video extender transmitter to ensure maximum dependability.USB connectivity allows dependable and efficient power supply with maximum productivity

Send 1080p HDMI up to 394 ft (120 m) over Cat6 to as many as four displays with IR control. Cascade receivers and use dedicated Gigabit switches or VLANs for scalable one‑to‑many distribution..Extend 1080p HDMI up to 120 m over Cat6 cabling..Split 1×4 with support for cascaded receivers..IR pass‑through enables remote source control..Metal housings improve heat dissipation and shielding.

This system transmits uncompressed, vivid video in real time with zero latency through walls, floors, and ceilings without interfering with other common wireless devices such as WiFi or Bluetooth. Double the Viewing Pleasure with HDMI Loop-through. With loop-through HDMI capability, the Aries Home+ lets you set up two separate viewing environments, so you can broadcast the game through one wired connection in your living room and one wireless in your man cave. The included extender allows you to control your media device from any area of the home. Change channels, pause your movie, adjust volume - any function will work. Simply point your remote control at the receiver and press your remote control's button - it's that easy. The ARIES Home+ can handle nearly all resolutions from various devices to display on televisions of any size. This means that you will have no trouble sending video games from your PC or your favorite TV show from your cable box. Just plug the transmitter into your devices HDMI port and the receiver into your HDTV and you're immediately connected. No software or WiFi connection required. The transmitter has 2x HDMI input and 1x HDMI output (loop-through to local TV) and the receiver has 1x HDMI output..Wirelessly stream true 1080p high definition 3D video and audio to your HDTV or projector up to 100ft.Broadcast movies, TV shows, games, and music from your cable box, Bluray player, gaming console, satellite, PC, Mac, laptop, and more.Powerful long range signal transmits uncompressed HD video and audio through walls, ceilings, and floors with zero latency (streaming line of sight results in maximum range).Control your devices from any room in your house with the IR remote extender.Transmit up to two media devices with 2x HDMI inputs. Easily switch between sources without unplugging.Use the loop-through wired HDMI output feature to set up two separate HDTV environments – one wired and one wireless allowing for one source to be viewed on two displays at the same time.Simple plug 'n play setup gets you watching quickly; no software or WiFi connection required; eliminates the inconvenience of installing messy cables.1.5" x 7.6" x 7.5", 3lbs..Digital Wireless HD Transmitter, External IR Remote Extender, Digital Wireless HD Receiver, 2x 5ft 100-240V AC Power Adapters, 5ft HDMI Cable, Remote Control, 2x Screws/Screw Anchors.1 Year Manufacturer's Labor + Parts Warranty, Lifetime Customer Support.In just minutes you can set up an enhanced wireless home entertainment experience that broadcasts all your media in razor-sharp, high definition with 3D with the Aries Home+.

This StarTech HDMI over CAT6 extender lets you transmit your 4K 60Hz signal up to 165' over a single CAT6 cable, with the added benefit of a local HDMI output. The extender supports High Dynamic Range (HDR), providing high contrast images with enhanced video. HDMI 2.0 capabilities offer 4:4:4 chroma subsampling to ensure a crystal-clear picture that's ideal for delivering video content. Connect your HDMI 2.0 devices and displays with confidence, knowing this extender is HDCP 2.2 compliant. This lets you harness the capabilities of HDMI-enabled devices such as Blu-ray players or online streaming devices in higher resolutions. It is also backward compatible with previous generations of HDMI and HDCP..Transmit an HDMI signal to up to 165' with the HDMI over CAT-6 extender kit.Dimensions: 0.5"H x 2.8"W x 3.8"D.Comes in black.Crystal clear picture quality with support for resolutions up to 4K 60Hz.Compatible with HDR and 4:4:4 chroma subsampling for lifelike images.Hassle-free setup with long-distance transmission over a reliable connection.Ensured compatibility with HDCP 2.2 devices and displays.Package includes: HDMI over CAT-6 transmitter and receiver, universal AC power adapter, IR blaster, IR receiver.Meets or exceeds RoHS, REACH, WEEE, FCC standards.2-year manufacturer limited warranty

The HDMI HDBaseT + USB-B to A and RS232 over Cat Extender Single Gang Wall Plate Transmitter to Box Receiver - 4K 60Hz allows a 4K HDMI source to be extended up to 130ft to a 4K display using a single Cat6a Ethernet cable. This is an ideal solution where USB must also be extended alongside HDMI video and audio to interactive whiteboards and displays in conference rooms, classrooms, lecture halls, and many other installation needs far beyond the length limitations of standard HDMI cabling. This HDBaseT kit extends HDMI and high speed USB 2.0 over a single Cat5e, Cat6, or Cat6a network patch cable. Extend 4K HDMI up to 115 feet and 1080p up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K HDMI up to 130 feet using a Cat6a cable. Extend USB 2.0 pass through up to 230ft, connecting up to 4 USB devices to the receiver. This kit is HDCP 2.2 compliant, making sure that the connection from the source is secure. Multi-channel audio formats are supported, including PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, and DTS:X. High speed USB 2.0 pass-through supports up to 230ft for KVM control of devices such as USB cameras, keyboards, mice, etc. With one-way Power over HDBaseT (PoH) support, the transmitter gets its power from the receiver, so no additional power adapter is required, allowing for greater installation flexibility. Advanced users can control RS232 pass-through to pass RS232 commands between the wall plate and the receiver. The receiver toggle switch also allows for the selection of upgrades that can upgrade both the wall plate and receiver. Support this HDBaseT system that is already deployed in the field by upgrading firmware through the Micro-USB port on front panel of the wall plate transmitter, and upgrade the firmware through the RS232 port on rear panel of the receiver. Note: Ensure a solid, reliable connection between the 4K HDMI HDBaseT Extender and critical equipment. We suggest using HDMI Cables with gripping connectors that provide greater port retention than standard HDMI connectors..Extend 4K at 60Hz (4:2:0) up to 115ft and 1080p at 60Hz up to 200ft with Cat 5e/6 cable.HDCP 2.2 compliant, to create a secure connection between the source and display.HDBaseT Chipset VS210, for simpler HDBaseT installations.The Transmitter supports automatic switching, following the last-in-first-out rule

Wireless HDMI Transmitter and Receiver Kit - 656 ft. - 1080p - HDMI over Wireless Extender - 2-Channel Audio Support - Low Latency - Wireless Long-Range Extension up to 200 m.This HDMI over wireless extender offers long-range extension and supports distances up to 656 ft (200 m).Bundled kit includes both the wireless transmitter and receiver for ultimate convenience.1080p HDMI over wireless extender enables you to wirelessly boost HDMI signals 1920x1080 (1080p).Eliminate cable clutter and installation costs without sacrificing picture quality, by transmitting your HDMI signal wirelessly.With no additional software or drivers to install, this wireless HDMI extender offers a hassle-free setup and is easy to use.HDMI® over Wireless Extender | 2-Channel Audio Support | Low Latency

HDMI over Powerline up to 984ft With IOGEAR's HDMI Over Powerline PRO Kit, transmit high-definition video and audio at astonishing distances up to 984ft over your home and Small Office Home Office's (SOHO) existing power outlets without having to incur the expense of rewiring. Enjoy content from your Blu-ray, set-top box or PC at resolutions up to 1080p. Simply plug in the transmitter into a power outlet and connect your HDMI source. Connect the HDMI receiver to a different power outlet and connect to your HDTV, monitor or projector. Note: This product requires an electrical power environment where the electrical wiring is on the same power circuit (100~240V AC grid) and should not be connected through an extension cord, power strip or surge protector. For optimal performance, plug directly into a wall socket and to the same unbroken circuit. How Does Powerline Work? Powerline is an incredibly simple and straightforward means to set up devices that uses your environment's power cables instead of Ethernet, saving you on the hassles of running wires between rooms and the cost of professional V installation. This technology offers an alternative means of transmitting high-definition video and audio, installs easily and provides a reliable form of data transmission at ultra-long distances. Powerline technology takes advantage of the electrical wiring that already exists within your home or office to transmit data from one power outlet to another. Transmitter and receiver(s) must be connected to the same unbroken circuit. It is highly recommended to plug all units directly into a wall outlet without extension cords, power strips, surge protectors or uninterruptible power supplies. Connection issues may arise if GPLHDPROK is connected to an electrical circuit with a Ground Fault Circuit Interrupter (GFCI) or Arc Fault Circuit Interrupter (AFCI) and if electrical outlet is located near to an appliance with high power consumption such as a washer or dryer. Flexible and Expandable Installation Connect and add up to 3 additional receivers (4 total receivers) to each HDMI Over Powerline PRO Kit and distribute HD video to multiple displays. The Powerline transmitter also includes an HDMI local display output for connecting a local display and for monitoring that digital signals are transmitted to all locations. The kit is plug-and-play, so setup is as simple as connecting your source device and display(s) and powering on the Powerline transmitter and receiver. More from the Manufacturer.Kit includes 2 receivers - System supports up to 4 receivers.No software needed - A plug-n-play solution.Send AV signal to 4 TVs with Powerline receivers simultaneously.Features a local HDMI out connection on the Powerline transmitter

Streamline your setup with our Delton E2 versatile HDMI Wireless Extender, designed to provide seamless, high-quality streaming up to 164ft. Whether for work or play, enjoy hassle-free wireless connection and easy setup, eliminating the mess of cables. Compatible with a wide range of devices including laptops, smartphones, TVs, and projectors, the wireless HDMI extender ensures you stay connected, whether at home, in the office, or outdoors. With a stable, interference-free signal and 1080P resolution, this HDMI transmitter and receiver is built for reliable, long-range performance. Its compact design makes it portable and easy to carry, while the easy setup gets you up and running instantly. Perfect for presentations, media streaming, and more, it enhances your viewing and working experience with flexibility and convenience.Eliminate the need for cables with Delton E2 wireless wifi extender’s wireless streaming that provides a reliable connection up to 164ft, ideal for both home and office use..Delivering crisp, clear visuals in 1080P, this wireless HDMI transmitter and receiver enhances your viewing experience, whether for entertainment or presentations..Wireless USB extender's 5.8G frequency ensures minimal interference, offering a stable and uninterrupted connection, even in high-traffic wireless environments..With a transmission range of up to 50 meters outdoors, this HDMI extender wireless is perfect for large spaces or outdoor setups, ensuring reliable performance wherever you need it..Experience consistent signal strength indoors with a range of up to 30 meters, ensuring excellent connectivity across rooms without obstructions..HDMI Wi-Fi transmitter and receiver's built-in indicator light provides a visual cue of the extender's operational status, so you can easily check whether it's functioning correctly..Seamlessly access popular streaming platforms such as Netflix, Prime Video, Hulu, YouTube, Skype, Hulu Plus, and Browser, enabling a smooth entertainment experience..Compatible with a wide variety of devices including laptops, PCs, Camera, DVD, Cable TV, Monitor, smartphones, set-top boxes, and Projector, offering versatile use across different setups.Wirelessly connect your devices to projectors for presentations or entertainment, providing a clean, cable-free solution for any setting..Set up the device quickly with simple functionality, eliminating the need for complicated configurations and allowing immediate use..Measuring 3.15" x 0.95" x 0.47", this HDMI wireless transmitter and receiver is compact enough for easy transport, fitting seamlessly into your bag or briefcase..Designed for both home entertainment and professional use, this HDMI receiver and transmitter ensures consistent wireless performance in various environments..Ideal for conference rooms, offices, and classrooms, making it perfect for professional presentations, collaborative meetings, and educational setups..1-year manufacturer limited warranty.Included in the package: Delton wireless transmitter and receiver, USB-C charging cable, and user manual..⚠ WARNING: Reproductive Harm - www.P65Warnings.ca.gov.Stream 1080P video wirelessly up to 164ft with our Delton HDMI Extender, offering stable performance, easy setup, and universal compatibility for effortless use in home, office, or outdoor environments.

Tripp Lite B126-1A1 HDMI TAA/GSA Active extender kit supports computer video resolutions up to 1920 x 1200 and HD resolutions. Includes transmitter and receiver for both audio and video. Connects up to 3 repeaters with receiver unit located at the end of installation. Extends 1080p signal up to 125' for each repeater in the installation and extends a 3D signal up to 100'. Comes with built-in equalization control for video image adjustment. Perfect to use with B126-002 and B126-004 transmitter units. Supports both stereo audio and 7.1 channel surround sound audio. Works well with all operating systems..HDMI over cat5/cat6 box-style transmitter receiver active extender kit connects monitors located over long distance.Comes in black color for a new look.Features HDMI female connector at A and RJ45 female connector at B.Features CAT 5/CAT 5E cable to offer reliable connection.HDMI Model has splitter display for viewing/reading and operates at the temperature 0 to 40 deg C.Measures 1" x 2.5" x 3.6".Provides computer video resolutions up to 1920 x 1200 and HD resolutions up to 1080p for better clarity.Supports 24-bit true color for reliable operation and has built-in equalization control for the video image adjustments.Features wired connectivity for reliable transmission and supports twisted pair media with 200' operating distance.Two-piece kit includes both local transmitter and remote receiver units for convenient operation.Designed for use with both stereo audio and 7.1 channel surround sound audio.Complies with Federal Trade Agreements Act certification for GSA schedule purchases.Includes B126-1A0 HDMI over Cat5 active extender remote unit, screwdriver for adjustment of equalization and mounting hardware.Suitable for use with B126-002 and B126-004 transmitter units.Comes with 1 year limited warranty.Tripp Lite HDMI over Cat5/Cat6 TAA/GSA Active extender kit supports 24 bit true color. Allows to connect monitors located over long distance.

4K HDMI over Fiber Extender Kit, 4K 60Hz up to 3300ft/1km (Single Mode) or 1000ft/300m (Multimode) LC Fiber Optic, HDR, HDCP, 3.5mm Audio/RS232/IR Extender, Transmitter and Receiver Kit.Extend an Ultra HD (UHD) 4K 60Hz HDMI signal with 7.1ch audio up to 3300ft (1km) over Single Mode or up to 1000ft (300m) over Multimode fiber cabling; Single Strand LC/UPC connector; HDR10; HDCP 2.2; 4:4:4 Chroma Subsampli.HDMI extender works over Single Mode or Multimode fiber, enabling the use of existing fiber cabling; Single strand optical fiber provides full bandwidth video while being immune to Electro-Magnetic Interference (EMI).HDMI 2.1 Extender offers an audio extraction function that enables playback of HDMI source audio via the 3.5mm audio output on the receiver unit; Simultaneous audio playback across both HDMI and 3.5mm outputs is supported.Point-to-Point connection with optical fiber between transmitter and receiver means no IP configuration, drivers, or network equipment required; Durable metal housing with built-in mounting brackets for a tidy installation.HDMI to Fiber Converter features a local HDMI output and IR/serial extension for convenient and versatile setup options; EDID Copy; LED indicators for status monitoring; 8kV air and 6kV contact Electrostatic Discharge (ESD) protection.Ideal for Digital Signage where the display is far away from the source device.Extend an HDMI video source in a hospital, with no Electromagnetic/Radio Frequency Interference (EMI/RFI).Connect a local video source to a remote display that is located across a building complex.Extend an HDMI audio and video signal over optical fiber at resolutions of up to 4K 60Hz with 7.1 channel audio

FREEDOM FROM CABLES This wireless video sender promises to replace inconvenient HDMI cables by streaming Full HD 1080p/60Hz via advanced wireless protocols while ensuring minimal latency and maximum clarity. Also, eliminate monthly subscription costs by streaming movies online. IMPRESSIVE VISUAL FIDELITY It is engineered to prevent any visible compression or distortion, delivering pristine picture quality for both professional and entertainment applications where detail and color accuracy are a priority. RF TECHNOLOGY FOR LONGER RANGE With high-speed radio frequency, it delivers superior quality streaming up to 50ft through walls, floors, & ceilings and 150ft without any barriers between the transmitter and receiver. This dongle has been tested by industry experts to assure a stable signal strength through obstacles. AUTO CHANNEL SELECTION Orion Prime's automatic switching technology scans the wireless spectrum, identifying the clearest channel to maintain signal quality and reduce interference. This dynamic selection process ensures optimal bandwidth utilization and enhances the stability and quality of your wireless HDMI connection. VARIOUS APPLICATIONS Orion Prime seamlessly integrates with a variety of HDMI-compatible sources and displays, making it ideal for diverse applications. Wirelessly cast business or educational presentations on a projector or stream from a laptop, desktop, A/V receiver, cable, or satellite box to a TV. EASY INSTANT CONNECTION It guarantees quick and effortless streaming, emphasizing simplicity by eliminating the need for additional software, apps, or Wi-Fi..Wireless Video Broadcast: Stream movies, TV shows, or sports wirelessly from any HDMI source to a TV or projector without requiring inconvenient cables, apps, drivers, or WiFi.Crystal Clear Video: Experience exceptional video clarity and 1080p resolution. This adapter is engineered to offer an undistorted HD visual performance.Assured Wireless Range: Certified lab tested to transmit up to 50ft through walls, floors, & ceilings and up to 150ft in clear line of sight environments without obstacles.Uninterrupted Wireless Connection: The auto-channel switching technology eliminates interference from other wireless devices such as Wi-Fi or Bluetooth, ensuring your streaming is always clear and stable.Easy Plug & Play: Step 1: Connect the wireless HDMI transmitter to a HDMI source and USB power. Step 2: Connect the receiver to the HDMI port of your display and power. And your streaming begins.Video Input: HDMI.Video Output: HDMI.Wireless Range: 50 ft (15.2 m) through walls, floors, & ceilings and up to 150 ft (45.7 m) in clear line of sight environments without obstacles.Transmission Frequency: 5.1~5.8 GHz, Auto-switching among 9 Channels.System Latency: 90 ms.Supported Video Resolution: TV - 1080p, 1080i, 720p, 576p, 480p. PC - 1024x768, 1280x1024, 640x480, 800x600 (Not 4K).Audio Formats Supported: PCM.Compression Standard: H.264.3D Compatible: No.Loop-through: No.Environmental Requirements: Operating temperature 0° to 40°C (32° to 104°F). Storage temperature -10 ~ +55°C (14° to 131°F). Relative humidity 15-80% RH.Source Compatibility: Any laptop or desktop system containing an HDMI port.Display Compatibility: Any high-definition television or projector containing an HDMI port,.Adapter Compatibility: Nyrius does not recommend using Digital to Analog Adapters with our products, however HDMI to miniHDMI, microHDMI, Displayport, or Lightning adapters are compatible.Standard Protocol: HDMI 1.4, HDCP 1.2.Bandwidth: 180 MHz.Remote Control: No.Number of HDMI Inputs: 1 Port.Multiple Transmitters: No.Multiple Receivers: No.Transmitter Dimensions: 6.68 x 1.57 x 0.67 inches / 169 x 40 x 17 mm (LxWxH).Receiver Dimensions: 6.68 x 1.57 x 0.67 inches / 169 x 40 x 17 mm (LxWxH).Power Input: Receiver USB-C 5DC 5V 1A, Transmitter USB-C 5DC 5V, 1A.Unit Weight: Receiver: 1.4 oz / 40 g, Transmitter: 1.4 oz / 40 g.What's Included: HDMI Transmitter, HDMI Receiver, 2x 3.3ft USB-A to USB-C Cable, Lifetime Customer Support, 1 Year Manufacturer’s Warranty.Experience video streaming wirelessly with the Nyrius Orion Prime Wireless HDMI-to-HDMI Transmitter & Receiver. Say goodbye to cable clutter. Whether you're enjoying a movie on a bigger screen or presenting a dashboard in a meeting, it makes it quick and convenient.

4K HDMI Extender over CAT6/CAT5 Ethernet Cable, 4K 30Hz or 1080p 60Hz Video Extender, HDMI Transmitter and Receiver Kit.This HDMI Extender over CAT6/5e sends 4K 30Hz up to 130ft (40m) or 1080p up to 230ft (70m) using a single cable; Transmitter power adapter supplies power to both units (PoC).Metal-housing w/ built-on mounting brackets; Includes IR Extension kit; Transmitter's local HDMI output can be used to connect a local display/cascaded to another extender; Ideal for digital signage in malls/stadiums/hospitals.7.1ch Audio | 4:4:4 Chroma | HDCP 1.4 | No software or drivers required | 2-year Warranty.4K 30Hz 130ft | 1080p 230ft | IR Extension | Power over Cable

Extend HDMI audio/video signals up to 394 ft (120 m) using a single Cat6 cable for cost‑effective connectivity. This transmitter supports resolutions up to 4K @30 Hz and 1080p, HDCP 1.4 compliance, and 2‑channel stereo audio. Flexible architecture enables direct 1‑to‑1, 1‑to‑many via unmanaged Gigabit switches, or many‑to‑many through VLAN on smart switches-up to 255 receivers per transmitter using HDBitT® protocol. One‑way IR pass‑through lets you control the source device remotely, while the durable, surface‑mountable metal housing ensures efficient heat dissipation and reliable long‑hour operation. (Additional receivers, CE‑H25E11‑S2, sold separately.).Supports up to 4K @30Hz and 1080p. HDCP 1.4 compliant. Supports 2-channel Stereo Audio. Auto adjustment for different cable lengths to produce the best video/audio experience. We recommend using high performance pure copper Cat6 cables to ensure reliable performance.Direct 1-to-1 connection, 1-to-many through unmanaged Gigabit network switches, or many-to-many via VLAN through a Smart Ethernet Switch. With HDBitT transport protocol, you can connect up to 255 Receivers* per Transmitter to not only extend but split HDMI signals to multiple displays. *Additional Receivers (CE-H25E11-S2) are sold separately.One-directional IR control from RX side to TX side. Allows the source device to recognize remote commands from afar. You can control the HDMI source device at a remote location with the included IR cables that forward commands over a Cat6 cable.High quality surface mountable metal housing efficiently dissipates heat build-up, to ensure system stability and trouble-free operation

Overview HDMI over IP Matrix - Decoder (RX), receives 4K@60Hz HDMI signal up to 394Ft (120m) over a single Cat6/7 cable, PoE, One to One, One to Many, Multi-casting, Video Wall, KVM, 18Gbps, HDCP 2.2, HDR 10, 7.1ch, Bi-directional IR, RS-232 Control, TAA Compliant, Kit (CE-H28A11-S1), Encoder (TX) (CE-H27F11-S1) Features Flexible matrix function to extend HDMI HDMI audio/video signals to the remote displays/monitors over UTP Cat6/7 cable up to 394ft (120m) and send the 4K@60Hz Ultra HD HDR resolution to the receiver for stable transmission and cost saving. Allows multiple receivers to be used simultaneously in multiple configurations Highly Scalable Works as a scalable TX/RX matrix over the dedicated IP network and extends/splits HDMI signals to multiple displays. Allows up to 65,536 total units, limited to 1,023 transmitter units, the additional Encoder (TX)unit (CE-H27F11-S1), Decoder (RX)unit (part#- CE-H27G11-S1), and Kit (CE-H28A11-S1) are sold separately PoE Technology Allows the power supply connected to either the TX or RX unit by Ethernet port to power both units, making it easy to construct and improve system robustness. No additional power adapter required Long Distance This 4K 60Hz HDMI over IP Matrix Kit is designed for reliably extend HDMI signals up to 394ft (120m) to remote HDMI displays through Gigabit Ethernet network and Gigabit Ethernet switch 4K UHD Resolution Supports Ultra High-Definition video resolution up to 4K (4096x2160) @60Hz HDCP 2.2, 4:4:4, HDR 10, Deep Color and 3D. Image rotation supports clockwise 90°, 180°, and 270° in video wall only IR Extension/RS-232 Control Bi-directional IR pass back function and RS-232 control source devices from remote RX locations, allowing you to select and switch between HDMI source devices High Performance Offers a true 18Gbps video bandwidth and supports 7.1-ch surround sound Extract Audio Audio extraction via digital PDIF (Toslink), 3.5mm stereo audio, or HDMI output ports. Digital PDIF audio format: PCM 2.0, Dolby 5.1, and DTS 5.1; 3.5mm stereo audio format: PCM 2.0; HDMI audio format: PCM 2.0/5.1/7.1, Dolby 5.1/7.1, and DTS 5.1/7.1 Multiple Connectivity Ports Comes with one HDMI output port, one Gigabit Ethernet network port, one 3.5mm IR emitter port, one 3.5mm IR receiver port, three USB-A 2.0 ports to connect USB peripherals, two USB-A 1.1 ports for keyboard & mouse, one 3.5mm microphone jack, one 3.5mm audio jack, one PDIF input port, one DIP switch for video channel selection, one RS-232 port for control, one DC power jack (5V/2A).1080p supported video mode for maximum viewing feasibility and adaptability.4096 x 2160 maximum video resolution for a spectacular, sharp display with added reliability.HDMI out enables you to transfer data from your devices to video extender receiver with added efficiency.USB connectivity allows dependable and efficient power supply with maximum productivity

The HDMI HDBaseT Extender over Cat Box Transmitter to Box Receiver - 4K 60Hz allows a 4K HDMI source to be extended up to 130ft to a 4K display using a single Cat6a Ethernet cable. This is an ideal solution for delivering uncompressed HDMI video and audio to displays in conference rooms, classrooms, lecture halls, and many other installation needs that are far beyond the length limitations of standard HDMI cabling. This HDMI HDBaseT Extender supports 4K resolutions at 60Hz up to 130ft and 1080p at 60Hz up to 230ft when using a single, recommended Cat6a Ethernet cable. Also, extend 4K at 60Hz up to 115ft and 1080p at 60Hz up to 200ft when using Cat5e or Cat6 cabling. This HDMI HDBaseT Extender is HDCP 2.2 compliant, making sure that the connection between the source and display is secure. The bi-directional PoC (Power over Cable) function allows both the transmitter and the receiver to be powered on when either side is plugged into power, allowing for greater flexibility in installations. Note: Ensure a solid reliable connection between the 4K HDMI HDBaseT Extender and critical equipment..Extend 4K at 60Hz (4:2:0) up to 115ft and 1080p at 60Hz up to 200ft with Cat 5e/6 cable.HDCP 2.2 compliant, to create a secure connection between the source and display.Bi-directional PoC, when either transmitter or receiver is plugged into power

The HDMI Ultra-Slim HDBaseT + RS232 and IR over Cat Extender Box Transmitter - 4K 60Hz allows a 4K HDMI source to be extended up to 130ft to a 4K display using a single Cat6a Ethernet cable. This is an ideal solution where HDMI video and audio need to be extended to displays in conference rooms, classrooms, lecture halls, and many other installation needs that are far beyond the length limitations of standard HDMI cabling. This transmitter extends HDMI signals over a single network patch cable. Extend 4K HDMI up to 115 feet and 1080p up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K HDMI or up to 130 feet using a Cat6a cable. This HDMI HDBaseT transmitter is HDCP 2.2 compliant, making sure that the connection from the source is secure. With bi-directional PoC support, one power adapter at either transmitter or receiver side can power both units, so no additional power adapter is required, allowing for greater flexibility in installations. Advanced users can control bi-directional IR and RS232 pass through. Note: Ensure a solid reliable connection between the 4K HDMI HDBaseT Extender and critical equipment. We suggest using HDMI Cables with gripping connectors that provide greater port retention than standard HDMI connectors. Stranded Cat5e/6/6a patch cables may be used for HDMI extension applications up to 230ft. Shielded, solid conductor Cat6 or HDBaseT Certified Cat6a network cabling is recommended for applications where the category cable must be coiled, is run near other high-frequency signaling cables, or in high EMI/RFI environments.Extend 4K at 60Hz (4:2:0) up to 130ft and 1080p at 60Hz up to 230ft with Cat 6a cable.Extend 4K at 60Hz (4:2:0) up to 115ft and 1080p at 60Hz up to 200ft with Cat 5e/6 cable.HDCP 2.2 compliant, to create a secure connection between the source and display.Bi-directional PoC, one power adapter at either transmitter or receiver side can power both units

Bring HDMI content to a distant display up to 394 ft (120 m) away over Cat6 with SIIG’s HDBitT® receiver. It delivers crisp Full HD 1080p at 60 Hz and supports both direct 1‑to‑1 links and, when paired with the matching transmitter (CE‑H26T11‑S1), 1‑to‑many distribution via unmanaged Gigabit switches-enabling up to 30 receivers per transmitter to mirror the same source. IR remote pass‑through lets users operate the source from the viewing area, simplifying control in signage and presentation environments. A robust, ventilated metal housing promotes effective heat dissipation for stable, continuous operation. (Note: 1‑to‑many mode requires the CE‑H26T11‑S1 transmitter, sold separately.).Delivers Full HD video content up to 1080p@60Hz resolution.Features direct 1-to-1 connection or 1-to-multiple connection through unmanaged Gigabit network routers or switches, With HDBitT® transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays. Note: 1-to-multiple connection requires HDMI Extender over CAT6 with IR - 120m, part # CE-H26T11-S1, sold separately.IR remote control allows to remotely control the HDMI source device from the remote display side.High quality durable metal housing with ventilation panels provides excellent heat dissipation to ensure reliable performance and system stability during long hours of operation

Extend an HDMI source up to 394 ft (120 m) over cost‑effective Cat6 cabling with SIIG’s transmitter for the HDBitT‑based HDMI over Ethernet solution. Ideal for digital signage, classrooms, and conference rooms, it supports flexible deployments-use a direct 1‑to‑1 link or distribute to multiple displays through unmanaged Gigabit switches. With the HDBitT transport protocol, a single transmitter can drive up to 30 receivers to mirror content across locations, delivering smooth Full HD 1080p at 60 Hz. IR pass‑through lets you control the source from the remote display, and a ventilated, durable metal enclosure enhances heat dissipation and long‑hour reliability. (Note: additional receivers, part # CE‑H26U11‑S1, sold separately.).Features direct 1-to-1 connection or 1-to-many connection through unmanaged dedicated Gigabit ethernet routers or switches. With HDBitT transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays. Note: Additional Receivers, part# CE-H26U11-S1, sold separately.Delivers crystal clear Full HD video content up to 1080p@60Hz resolution.IR remote control pass-through feature allows you to remotely control the HDMI source device at the display location.High quality durable metal housing with ventilation panels provides excellent heat dissipation to ensure reliable performance and system stability during long hours of operation

Transmits your favorite TV shows, films, music, sport, & games, through walls, ceilings, & floors (streaming line of sight results in maximum 30ft range). Now you can watch movies stored on your computer & content from services like YouTube, Netflix, or other video streaming websites, on your big screen HDTV. Revel in the independence of no longer being limited by wires, software applications, TV schedules or your cable bill. Wires are a disadvantage of modern electronic devices. They disrupt the style of your room, they are a potential tripping hazard, & they limit where your devices can be located. The NPCS549 removes wires from the equation, allowing you to place HDMI devices where you want them. The ARIES Prime's convenient plug & play setup gets you watching wireless video fast. There's no software required - all you have to do is plug the transmitter & receiver directly into your device's HDMI connections & you're immediately connected. While optimized for use with laptops, the ARIES Prime media streaming stick wirelessly connects any HDMI device to your HDTV or projector. Unlike other streaming sticks, the Prime is true HDMI mirroring - what you see on your HDMI source is exactly what you see on your TV in real time. The powerful, high-speed digital signal won't interfere with Bluetooth, WiFi, or any other wireless network..Wirelessly stream true 1080p high definition 3D video & digital audio to your TV or projector. Watch movies & TV shows from your laptop, PC, Mac, A/V receiver, gaming console, cable/satellite.Transmitted signal is crystal clear, able to stream uncompressed HD video & audio with ease. Signal experiences zero latency (real time) even when streaming 3D video to a 1080p device.Easy to install plug 'n play set up eliminates the need to install expensive, inconvenient cables. No software or WiFi connection required. Transmitter: 1 x HDMI input, Receiver: 1 x HDMI output.High performance digital signal transmits through walls, ceilings, & floors (streaming line of sight results in maximum 30ft range).Compact low profile design makes it perfect for laptops and works with any HDMI video device.1.1" x 3.7" x 3.8", 2lbs..Wireless HDMI Transmitter, Wireless HDMI Receiver, 100-240V AC Power Adapter for Receiver, MiniUSB Power Cable for Transmitter, 5 ft HDMI Cable, Right Angle Adapter, Quick Start Guide, User Manual.1 Year Manufacturer's Labor + Parts Warranty, Lifetime Customer Support.The Nyrius ARIES Prime Wireless HDMI Transmitter enables you to watch what you want by streaming from your laptop or any HDMI device to your TV in razor sharp, uncompressed 1080p high definition video with absolutely no loss in picture quality - it's like an invisible HDMI cable.

Break free from your cable bill. The Internet is an abundant source of movies and videos and with ARIES Pro you can stream it to your TV wirelessly. This convenient system allows you to browse the Internet, stream media from Netflix, Hulu, YouTube and more. ARIES Pro allows for powerful, no latency wireless transmission of true 1080p HD video from an HDMI source. Send crystal clear video through walls, floors & ceilings up to 100ft away without interference from WiFi or Bluetooth devices. Streaming line of sight results in maximum range. Mount your projector or HDTV without the hassle of hiding messy cables. Instant connection with no software, complicated setup or WiFi needed. Videographers can use the ARIES Pro to stream video from their UAV Drones, HDSLRs & video cameras. Add a USB power source to your camera setup to freely move into tight spaces and unbelievable heights all while monitoring your footage remotely in real time. Play video games from your desktop PC or laptop, PS4 or Xbox One on your TV wirelessly, with zero latency. ARIES Pro will provide audio and video that is completely in sync. Use your laptop screen for notes while displaying your presentation on the boardroom TV. Have your laptop by your side without being tied down by a short HDMI cable..Stream HD 1080p 3D movies, TV shows, video wirelessly from your laptop, PC, Mac, UAV/FPV Drone, HDSLR Camera to HDTV, projector, or monitor.High performance, powerful long-range signal transmits through walls, floors, & ceilings, up to 100ft away (streaming line of sight results in maximum range).Send crystal clear, uncompressed HD video & digital audio with ease. Signal experiences zero latency (real time) even when streaming 3D video to an 1080p device.Easy to install plug 'n play set up eliminates the need to install expensive, inconvenient cables. No software or WiFi connection required. Transmitter: 1x HDMI input, Receiver: 1x HDMI output.Compact transmitter design suited for laptops, UAV Drones and streaming live camera footage & any other HDMI source to a monitor; powered by USB..1.1" x 3.7" x 3.8", 2lbs..Digital Wireless HD Transmitter, Digital Wireless HD Receiver, 1x 100-240V AC Power Adapter, 5ft. HDMI Cable, 1x USB Power Cable, Right Angle Adapter, 2x Screws/Screw Anchors, Quick Start Guide.1 Year Manufacturer's Labor + Parts Warranty, Lifetime Customer Support.The Nyrius ARIES Pro allows you to unchain your HDMI device from your TV in razor sharp, uncompressed 1080p 3D video - it's like an invisible HDMI cable.

This HDMI® Extender transmits a 4K 60Hz HDMI audio video signal up to 230ft (70m) over Category 5e/6 Ethernet Cabling. The converter kit includes the transmitter and receiver units for a complete point-to-point solution. This HDMI extender supports resolutions of up to 4K 60Hz with zero latency over a single Ethernet cable. The UHD HDMI Extender supports HDMI 2.0 and 4:4:4 chroma subsampling, which ensures clear and stable video output. Connect the power adapter to the transmitter or receiver to power both units, using Power-over-Cable (PoC). Use an IR remote control to communicate with the source device, from the location of the receiver unit, using the IR extension kit. The 4K HDMI Extender features an HDMI output on the transmitter unit, enabling the connection of an HDMI display or to connect additional video extenders - to establish a cascade connection. Plug-and-play installation with no additional software or drivers required. Attach the mounting brackets to the metal housing and to a wall, ceiling, or to the underside of a table, facilitating a multitude of professional installation options. The rubber feet protect the mounting surface and isolate the units from vibration..4K HDMI Extender transmits 4K 60Hz (4:4:4) video signals and 7.1ch audio up to 230ft (70m) with zero latency over a single CAT5e/6 cable; HDMI 2.0; HDR; HDCP 2.2; HDMI or S/PDIF audio output; DTS and Dolby Digital audio.Included power adapter connects to the HDMI Extender Kit's transmitter and powers the receiver for areas where power outlets may be limited; Power is delivered to the receiver over a CAT5e/6 cable, using Power-over-Cable (PoC).Transmitter features an HDMI output which can be used to connect a local display or to connect cascaded HDMI extenders; HDMI extender over Ethernet Cable is ideal for digital signage in malls, stadiums, and hospitals.HDMI over CAT5/CAT6 Extender includes an IR Control Extension Kit, with 1x IR Blaster and 1x IR Receiver, to control an IR device from the receiver; IR Blaster/Receiver feature pre-installed adhesive for convenient installation.Durable metal housing, 8kV air and 6kV contact ESD protection, suitable for a variety of environments; Included mounting kit and rubber feet provide versatile installation options; No IP configuration, software, or drivers required.This HDMI extender supports resolutions of up to 4K 60Hz with zero latency over a single Ethernet cable. The UHD HDMI Extender supports HDMI 2.0 and 4:4:4 chroma subsampling, which ensures clear and stable video output..Connect the power adapter to the transmitter or receiver to power both units, using Power-over-Cable (PoC). Use an IR remote control to communicate with the source device, from the location of the receiver unit, using the IR extension kit..Display the same image on a display locally and to a remote location.This product is backed for 2-years, including free lifetime 24/5 multi-lingual technical assistance..Extend an HDMI® audio-video signal up to 230ft (70m), with Power-over-Cable and resolutions up to 4K 60Hz

Extends HDMI 1.4 audio and video signals, RS232 control, IR control, and Power over Cable (PoC) up to 100 meters over a single CAT5e/6 cable with industry recognized HDBaseT technology Extends HDMI 1.4 audio and video signal from your HDMI source to a remote HDMI display up to 330ft (100m) at Full HD 1080p, up to 230ft (70m) at UHD 4K (3840x2160) through a single premium quality CAT5e/6 cable Note : The transmission distance will vary depending on cable quality, 100% copper and IEEE-568B wiring standard recommended Delivers crystal clear picture quality with resolution up to 3840x2160@30Hz (YUV 4:4:4 8-bit / YUV 4:2:0 10-bit) Pure unaltered uncompressed 7.1ch digital HDMI over CAT cable transmission, DTS-HD Master Audio and Dolby TrueHD high bit rate audio support Supports PoC (Power over Cable) technology which allows both the transmitter and receiver units to be powered using only one power adapter connected to either unit Bi-directional IR sensors allow you to remotely control the HDMI source device at the remote display side or control the remote display at the source device side High quality metal housing with cooling slots provide excellent ESD and electromagnetic protection plus excellent heat dissipation and cooling for stable operation during extended hours of use Slim profile design easily adopts into versatile application environment, wall mountable housing for easy and varied installation requirements.3840 x 2160 maximum video resolution for a vivid, crystal clear display with added productivity.HDMI in allows convenient transfer of content and data to video extender transmitter/receiver to ensure maximum dependability.HDMI out enables you to transfer data from your devices to video extender transmitter/receiver with added efficiency.Twisted pair media type is very easy to connect and can carry both analog and digital data at the same time for maximum connection efficiency

FREEDOM FROM CABLES This wireless video sender promises to replace inconvenient HDMI cables by streaming Full HD 1080p/60Hz via advanced wireless protocols while ensuring minimal latency and maximum clarity. Also, eliminate monthly subscription costs by streaming movies online. IMPRESSIVE VISUAL FIDELITY It is engineered to prevent any visible compression or distortion, delivering pristine picture quality for both professional and entertainment applications where detail and color accuracy are a priority. RF TECHNOLOGY FOR LONGER RANGE With high-speed radio frequency, it delivers superior quality streaming up to 50ft through walls, floors, & ceilings and 150ft without any barriers between the transmitter and receiver. This dongle has been tested by industry experts to assure a stable signal strength through obstacles. AUTO CHANNEL SELECTION Orion Prime's automatic switching technology scans the wireless spectrum, identifying the clearest channel to maintain signal quality and reduce interference. This dynamic selection process ensures optimal bandwidth utilization and enhances the stability and quality of your wireless HDMI connection. VARIOUS APPLICATIONS Orion Prime seamlessly integrates with a variety of USB-C compatible sources and displays, making it ideal for diverse applications. Wirelessly cast business or educational presentations on a projector or stream from a laptop/desktop (requires USB-C port that supports video output), smartphone, or tablet to a TV. EASY INSTANT CONNECTION It guarantees quick and effortless streaming, emphasizing simplicity by eliminating the need for additional software, apps, or Wi-Fi..Wireless Video Broadcast: Stream movies, TV shows, or sports wirelessly from a USB-C source to a TV or projector with an HDMI port without requiring inconvenient cables, apps, drivers, or WiFi.Crystal Clear Video: Experience exceptional video clarity and 1080p resolution. This adapter is engineered to offer an undistorted HD visual performance.Assured Wireless Range: Certified lab tested to transmit up to 50ft through walls, floors, & ceilings and up to 150ft in clear line of sight environments without obstacles.Uninterrupted Wireless Connection: The auto-channel switching technology eliminates interference from other wireless devices such as Wi-Fi or Bluetooth, ensuring your streaming is always clear and stable.Easy Plug & Play: Step 1: Connect the sender to a USB-C source (supporting DisplayPort Alt Mode). Step 2: Connect the receiver to the HDMI port of your display and power. And your streaming begins.Video Input: USB-C.Video Output: HDMI.Wireless Range: 50 ft (15.2 m) through walls, floors, & ceilings and up to 150 ft (45.7 m) in clear line of sight environments without obstacles.Transmission Frequency: 5.1~5.8 GHz, Auto-switching among 9 Channels.System Latency: 90 ms.Supported Video Resolution: TV - 1080p, 1080i, 720p, 576p, 480p. PC - 1024x768, 1280x1024, 640x480, 800x600 (Not 4K)..Audio Formats Supported: PCM.Compression Standard: H.264.3D Compatible: No.Loop-through: No.Environmental Requirements: Operating temperature 0° to 40°C (32° to 104°F). Storage temperature -10 ~ +55°C (14° to 131°F). Relative humidity 15 ~ 80% RH.Source Compatibility: Any mobile phone, tablet, laptop, or desktop having USB-C port with Alternate Mode (Alt Mode for audio and video output).Display Compatibility: Any high-definition television or projector containing an HDMI port.Adapter Compatibility: Nyrius does not recommend using Digital to Analog Adapters with our products, however HDMI to miniHDMI, microHDMI, Displayport, or Lightning adapters are compatible.Standard Protocol: HDMI 1.4, HDCP 1.2.Bandwidth: 180 MHz.Remote Control: No.Number of HDMI Inputs: 1 Port.Multiple Transmitters: No.Multiple Receivers: No.Transmitter Dimensions: 6.68 x 1.57 x 0.67 inches / 169 x 40 x 17 mm (LxWxH).Receiver Dimensions: 6.68 x 1.57 x 0.67 inches / 169 x 40 x 17 mm (LxWxH).Power Input: Receiver and Transmitter USB-C 5DC 5V, 1A.Unit Weight: Receiver:1.4 oz / 40 g, Transmitter 1.4 oz / 40 g.What's Included: USB-C Transmitter, HDMI Receiver, 1x 3.3ft USB-A to USB-C Cable, Lifetime Customer Support, 1 Year Manufacturer’s Warranty.Experience video streaming wirelessly with the Nyrius Orion Prime Wireless USB-C-to-HDMI Transmitter & Receiver. Say goodbye to cable clutter. Whether you're enjoying a movie on a bigger screen or presenting a dashboard in a meeting, it makes it quick and convenient.

Extend 4K HDMI Audio/Video Range With HDBaseT-Lite The Cinema 4K HDBaseT-Lite Extender with HDMI Connection and Power-over-HDBaseT (POH) offers professional-grade features, reliability, and video signal interference protection. Extend the range of an HDMI display up to 223 feet using a Cat 5e/6/6a cable. Achieve Cinema 4K resolutions of 4096 x 2160 @ 60Hz up to 113 feet from the source and 1080p @ 60Hz HD resolutions up to 223 feet away through a single extender. The Extender is ideal for use in home theaters, conference rooms, lobbies or other environments where high quality video is needed at extended ranges. Need More Distance? Daisy chain the Extender to quickly expand the distance between a display and its HDMI source. Connect up to three HDBaseT-Lite HDMI Extenders to reach a maximum range of 669 feet at 1920 x 1080 resolutions and distribute Cinema 4K quality up to 339 feet ensuring the highest quality video without signal loss or drops. Professional-Grade Features The 4K HDBaseT-Lite Extender is designed with the professional AV installer in mind. The compact, all metal Extender is easily mounted in an AV rack, enclosure or cabinet and features a no-slip DC jack locking mechanism and HDMI locking screw for enhanced reliability. Bi-directional RS-232 support and extended IR pass-through enable source control via a universal remote or touch panel..DHCP1.4 Content protection.Bi-directional RS-232 support for universal remotes, touch panels & barcode scanners.Bi-directional IR signal.Daisy chain up to 3 levels to extend HDMI up to 339 ft. at 4096 x 2160 @ 60Hz resolution, or 687 ft. at 1080p

Startech.com® HDMI over single cat 5e / 6 extender has maximum video resolution of 1920 x 1080 and supports twisted pair media. Video extender has wired connectivity technology and supports up to 4 output devices..Input connector: 1 x HDMI.Output: 1 x HDMI.Extend HDMI when power outlets are limited, with only a single power adapter required at either the transmitter or receiver, using power over cable.Maximum resolution: 1920 x 1080.Graphics modes: Full HD.Dimensions: 1"(H) x 2.6"(W) x 3.1"(L).Black.Enclosure material: Aluminum.Connectivity technology: Wired.Input voltage: 110 - 220 VAC.Maximum cable length: 0.2'.Twisted pair cable standard: Category 6.Maximum operating distance: 230'.Media type supported: Twisted pair.Supported video modes: 1080p.Includes 1 x HDMI over CAT5e/6 transmitter unit, 1 x HDMI over CAT5e/6 receiver unit, 1 x power adapters, 1 x instruction manual, 1 x mounting brackets.Certifications and standards: CE, FCC, RoHS.Weight: 10.90 oz..Warranty: 2 years.Startech.com® HDMI over single cat 5e / 6 extender has a maximum operating distance of 230' and is used for scenarios in which remote monitor displays are required.

The HDMI over Cat Extender Box Transmitter to Box Receiver - 4K 60Hz allows a 4K HDMI source to be extended up to 131ft to a 4K display using a single Cat6/6a Ethernet cable. This is an ideal solution where HDMI video and audio in conference rooms, classrooms, lecture halls, and many other installation needs are far beyond the length limitations of standard HDMI cabling. This HDMI over Cat Extender is HDCP 2.2 compliant, making sure that the connection from the source is secure. Multi-channel audio formats are supported, including PCM 7.1, Dolby TrueHD and DTS-HD Master Audio. With bi-directional Power over Cable (PoC) support, one power adapter at either transmitter or receiver side can power both units, so no additional power adapter is required, allowing for greater flexibility in installations. Note: Ensure a solid, reliable connection between the 4K HDMI Extender and critical equipment. We suggest using HDMI Cables with gripping connectors that provide greater port retention than standard HDMI connectors..Supports multi-channel audio formats, including PCM 7.1, Dolby TrueHD and DTS-HD Master Audio.Extend 4K 60Hz (4:4:4) up to 115ft with Cat 6a cable.Extend 4K 30Hz (4:4:4) up to 131ft and 1080p at 60Hz up to 164ft with Cat 5e/6/6a cable.One power adapter at either transmitter or receiver can power both units

The StarTech.com® HDMI over CAT6 extender features 4-port USB hub for easy remote peripheral integration. It supports uncompressed 1920 x 1200 or 1080p HD video extension. This extender extends HDMI video and four USB peripheral devices up to 165'. It supports CAT5e and CAT6 Ethernet cable. This extender allows you to operate one or more servers from a remote location within the same building. It comes with HDMI transmitter and receiver..HDMI over CAT6 extender with 4-port USB hub offers crystal-clear picture quality.Dimensions: 3.2"L x 3.2"W x 0.8"H.Power source: AC adapter.Includes one HDMI over CAT6 transmitter, one HDMI over CAT6 receiver, two Ethernet cables, two USB to Mini-USB cables, one universal power adapter.Audio, Cabling: Cat 5 UTP or better, Audio specifications: Supports Dolby TrueHD, DTS-HD MA, IR interface: Bi-directional, 38Khz/+10 deg/5M.Connections: One HDMI (19-pin) female input, two USB mini-B (5-pin) female, one HDMI (19-pin) female output, four USB A (4-pin) female.Wide screen supported, Output current: 1 A, Output voltage: 5 DC, Plug type: N, Graphics modes: WUXGA.Connectivity technology: Wired, Maximum operating distance: 260', Media type supported: Twisted pair, Number of HDMI inputs: 1\.Crystal-clear picture quality, with support for uncompressed 1920x1200 or 1080p HD video extension, Easy remote peripheral integration.Extends HDMI video and four USB peripheral devices up to 165', Supports CAT5e and CAT6 Ethernet cable.Applications: Place your display in a convenient viewing area, while your system equipment is installed elsewhere in a clean and secure environment.Applications: Operate one or more servers from a remote location within the same building or campus.Operating temperature: 0 - 40 deg C, Storage temperature: -10 - 60 deg C, Humidity: 0% - 80 % RH (non-condensing).Meets Green compliant, RoHS, CE, FCC, WEEE certifications or standards.Weight: 8.1 oz..Comes with 2 year warranty

Power over cable allows a single power source to operate the transmitter and receiver..HDMI Cat 5/Cat 6.Local unit connectors: 1 x 19 pin female HDMI, 2 x RJ-45 female.Remote unit connectors: 1 x 19 pin female HDMI, 2 x RJ-45 female.Black.Device supported: 2, displays supported: 1.Platform supported: PC.Connectivity technology: Wired, media type supported: Twisted pair, twisted pair cable standard: Category 6.Material: Aluminum enclosure.Form factor: Rack-mountable.Max transfer distance: 165'.Optimize placement of digital signage in healthcare, education, retail, and government facilities.Place the display in a convenient viewing area, while the system equipment is placed elsewhere in a clean and secure environment.Support for high definition resolutions of up to 1920x1080/1080p.Dimensions: 0.8"(H) x 2"(W) x 3.1"(D).Includes 1 x HDMI over CAT5e/6 UTP transmitter, 1 x HDMI over CAT5e/6 UTP receiver, 1 x universal power adapter (EU, UK, NA), 2 x mounting brackets, 2 x foot pad set, 1 x user manual.Certifications & standards: RoHS Green compliant, CE, FCC.Weight: 5.5 oz..Warranty: 2 years limited.Warranty: 2 years limited

Transmitts 1080p signals up to 98ft wirelessly from USB-C laptops, notebooks, smartphones, and tablets Extends V signals wirelessly from Laptop/Notebook/Tablet/Smartphone via USB-C port embedded with DisplayPort Alternate mode signal Note : USB-C source port must support DP-Alt mode for video signal to pass through the adapter Connect the Transmitter to a USB Type-C (Thunderbolt 3 compatible) equipped device (computer, notebook, laptop, tablet, phone) and wirelessly transmit audio/video signals to the Receiver, equipped with an HDMI output. Note : Please allow up to 30 seconds for the Transmitter and Receiver to link up. The source device needs some time to detect and enable Type-C Alternate mode Wireless 5G technology reliably extends V signals up to 30M (98ft) to a remote HDMI display Note : The transmission distance will vary depending on building layout, electronic interference, walls and partitions, other wireless signals, and may be much less than the maximum Video resolutions up to Full HD 1080p for stunning and crystal clear images Perfect solution for meetings, conference rooms, home entertainment and multi-media education Plug-n-Play installation, no software installation or hardware setup is required.1920 x 1080 maximum video resolution for a vivid, crystal clear display with added productivity.HDMI out enables you to transfer data from your devices to video extender transmitter/receiver with added efficiency.USB connectivity allows dependable and efficient power supply with maximum productivity.1 output devices supported for maximum productive usability