Managed Ethernet Switches

Supports the needs of edge networking and automated management of prioritized voice, video, and data traffic..8 Gigabit Ethernet ports.Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management..The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..Dimensions in Inches: 6.2L x 4W x 1.1H; Weight in Pounds: 1

Juniper Networks EX3400 Ethernet Switch delivers a high-performance, flexible, and cost-effective solution for today's most demanding converged data, voice, and video enterprise access environments.To simplify network operations, the EX3400 is hardware-ready to act as a satellite device to Fusion Enterprise deployment, which can combine several wiring closets into one logical management platform. The EX3400 also supports Juniper Networks Virtual Chassis technology, allowing up to 10 switches to be interconnected over uplink ports and managed as a single device, delivering a scalable, pay-as-you-grow solution for expanding network environments..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.Gigabit Ethernet port for ultra-fast network speeds.Supports layer 3 switching for enhanced performance and usability.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage

Mellanox SN4700 spine/super-spine offers 32 ports of 400GbE in a compact 1U form factor. It enables connectivity to endpoints at varying speeds and carries a throughput of 25.6Tb/s, with a landmark 8.4Bpps processing capacity. As an ideal spine solution, the SN4700 allows maximum flexibility, with port speeds spanning from 1GbE to 400GbE per port..32 × QSFP‑DD 400GbE ports with breakout support..High‑performance, fully managed Layer 3 data center switch..Up to 400,000 Mbps per port, 12.8 Tbps aggregate capacity..1U rackmount (43.6 × 436 × 515 mm)..Supported (v1, v2c, v3 with secure authentication)..Advanced traffic prioritization, congestion management, and lossless Ethernet..Managed via Cumulus Linux/Onyx with SSH, RADIUS, TACACS+, and automation tools..12.8 Tbps switching, full‑duplex, VXLAN, BGP‑EVPN, MPLS, MLAG, ECMP..~300–400W typical with redundant hot‑swappable PSUs and adaptive power scaling..IEEE 802.1Q, IEEE 802.3, RoHS, CE, FCC, UL compliance.

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 24 PoE+ ports.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Dimensions: 1.73"H x 17.5"W x 13.8"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks.Flexible downlink options with data, PoE+, or mGig.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160Gbps.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Lifetime manufacturer limited warranty

The Cisco Catalyst 9300 Series switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At up to 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise technology, providing flexible deployment with support for nonstop forwarding with Stateful Switchover (NSF/SSO), for the most resilient architecture in a stackable (sub-50-ms) solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Power over Ethernet Plus (PoE+), 60W Cisco Universal Power over Ethernet (Cisco UPOE) and 90W Cisco UPOE+ ports..Rack mountable switch is stackable enterprise switching platform built for security, IoT, mobility, and cloud.Contains 48 fixed uplink PoE+ and four 10Gb uplink ports.Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry.Dimensions: 1.73"H x 17.5"W x 16.1"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.Cisco UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.USB 2.0 slot to load system images and set configurations.Up to 480Gbps of local stackable switching bandwidth.Deeper buffer and higher-scale model options for rich multimedia content delivery applications.Leading PoE capabilities with up to 384 ports of PoE per stack, PoE+, and high density IEEE 802.3bt - 60W UPOE, and 90W Cisco UPOE+.Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy.Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64000 flows.Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Lifetime manufacturer limited warranty

The Netgear M4300-52G-PoE+ switch delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge and SMB core deployments with unrivaled ease of use. Nonstop forwarding (NSF) virtual chassis architecture provide advanced High Availability (HA) with hitless failover across the stack. Intelligent Netgear IGMP Plus multicast allows for scalable Pro AV installations at Layer 2 without the PIM complexity. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing – as standard. The Netgear M4300 Switch Series is perfect for wireless access, unified communications and professional AV-over-IP installations. Netgear Intelligent Edge Switch solutions combine latest advances in hardware and software engineering for higher flexibility, lower complexity and stronger investment protection, at a high-value price point..Stackable managed switch in 1U rack mount form factor for midsize organizations networks.Features 48 x 1000BASE-T (RJ-45) PoE+ ports, 2 x 10GBASE-T (RJ-45), 2 x 10GBASE-X (SFP+) independent ports, out-of-band 1G Ethernet management port, Mini-USB and RJ-45 RS232 console ports, USB storage port.176Gbps non-blocking fabric across 52 ports.Dimensions: 1.73"H x 17.32"W x15.28"D.Maximum power consumption: 888W.Full L3 feature set and nonstop forwarding (NSF) stacking.Ships with one modular APS1000W PSU in first power supply slot.Ships with a blank cover in the second power supply slot.Lifetime manufacturer limited warranty

Ultra-high-speed 25GbE fiber managed switch with 10GbE connectivity for backbone networks | Features The QSW-M5216-1T is a 16-Port 25GbE SFP28 fiber Managed Switch with one 10GbE NBASE-T port. Supporting Layer 2 switching and network management via a user-friendly web user interface, the QSW-M5216-1T provides an entry-level network management solution that is usable even by non-IT professionals. Offering ultra-high 25GbE speeds and a backbone switching capacity of 820Gbps, the QSW-M5216-1T can serve as the core switch uplinking to 25G Servers and NAS in server rooms or connecting to 25G/10G switches to accelerate high-speed storage, video editing, virtualization, and AI applications. The QSW-M5216-1T provides flexible network interfaces for high compatibility at an affordable price, enabling small businesses to quickly upgrade to an ultra-high-speed backbone network by integrating to existing network infrastructure. 25GbE Fiber The QSW-M5216-1T has sixteen 25GbE SFP28 fiber ports and a backbone switching capacity of 820Gbps for uplinking server rooms. 10GbE connectivity The QSW-M5216-1T is equipped with one 10GbE NBASE-T port for hybrid high-speed network deployment. User-friendly management interface Featuring a user-friendly web UI, the QNAP Switch System (QSS) provides an overview dashboard, port management and setting guide, making central network management intuitive and easy. Layer 2 network The QSW-M5216-1T provides Layer 2 management features (such as LACP, VLAN, ACL and LLDP) for efficiently controlling network bandwidth and enhance security. RSTP protocol The QSW-M5216-1T supports Rapid Spanning Tree Protocol (RSTP). You can easily and efficiently deploy small/medium-scale networks that support expansion, redundancy, and loop prevention. Energy saving Compliant with IEEE 802.3az Energy Efficient Ethernet and IEEE802.3x Flow Control in full-duplex mode, the QSW-M5216-1T avoids packet loss from unparalleled bandwidth and reduces power consumption for low-speed and inactive connections. QNAP 25GbE Switch QSW-M5216-1T | Honored with Interop Tokyo 2022 Best of Show Award for Runners-up | Upgrade to ultra-high-speed 25GbE with ease! While 10GbE is a solid base for high-speed network transmission, the ultra-high-speed 25GbE provides comparative cost advantages and compatibility in SMB server rooms to satisfy data computing applications. High-speed Storage & AI applications 25GbE fulfills bandwidth requirements in high-speed storage, virtualization, and AI applications. High Compatibility 25GbE SFP28 is backward compatible with 10GbE SFP+/1GbE SFP and can be connected to 50GbE/100GbE via Breakout DAC, easily integrating existing network infrastructure..Quickly and easily set up a wired network with 1 networking ports.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Rack-mountable form factor for your convenience and simplicity of usage.10 Gigabit Ethernet Ethernet technology for a reliable, convenient way of communication and connectivity

Extend intent-based networking everywhere Cisco® Catalyst® 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise - it is secure, always on, and IT simplified..Features 24 Gigabit Ethernet ports, Class 4 performance, and fully managed network control for enterprise-grade deployments..Delivers Power over Ethernet (PoE+) across all 24 ports, supporting up to 370W total power budget for connected devices..Provides 1000 Mbps per port, enabling high-speed Gigabit Ethernet connectivity for reliable data transmission..Built in a fixed configuration 1U rack-mountable form factor, ideal for compact enterprise deployments..Supports SNMP v1, v2c, and v3, enabling secure and scalable network monitoring and management..Equipped with Quality of Service (QoS) features to prioritize bandwidth for critical applications and devices..Offers comprehensive system management with advanced security features like 802.1X authentication..Operates with energy-efficient hardware, supporting Cisco EnergyWise technology to optimize power usage and reduce overall consumption in network environments..Complies with RoHS environmental standards, restricting the use of hazardous substances in electronic components..Backed by a lifetime warranty.

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ and four 10Gb uplink ports.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Dimensions: 1.73"H x 17.5"W x 11.3"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks.Flexible downlink options with data, PoE+, or mGig.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 80Gbps.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Lifetime manufacturer limited warranty

The Aruba 6300M switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba network analytics engine, the Aruba 6300M extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX mobile app verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management..Stackable switch is perfect for enterprise network access, aggregation, core and data center top-of-rack deployments.Features 24 x 1/2.5/5GbE BASE-T PoE and 4 x 1/10/25/50G SPF ports.Management security restricts access to critical configuration commands, provides multiple privilege levels with password protection, and local/remote syslog capabilities allow logging of all access.Throughput: 476Mpps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Maximum power consumption: 131-139W with JL086A, JL087A, JL670A PSU; switching capacity: 640Gbps.Certifications and standards: Meets or exceeds UL, FCC standards.Allows for stacking of up to 10 switches, providing scale and simplified management.Stackable layer 3 switch with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS.Provides NetEdit support for automation, configuration, verification, and one-touch deployment with the mobile app.Offers redundancy and PoE customization with hot-swappable power supplies and fans.Memory and processor: 1.8GHz quad-core ARM Cortex-A72; 8GB DDR4 and 32GB eMMC with 8MB shared packet buffer memory.Class 6 PoE ports supporting up to 60W per port.Switch has two fan tray slots and comes with one fan tray installed.Lifetime manufacturer limited warranty

Features auto-negotiation, auto-sensing/device detection, flow control, packet filtering, and store-and-forward capabilities..5 x 10/100/1000Base-T.128KB buffer.Interfaces/ports: 5 x Network (RJ-45), 5 x gigabit Ethernet network.Data transfer rate: 2000 Mbps (full-duplex).Filtering address table: 8K MAC entries/device.Dimensions: 1.2"(H) x 7.8"(W) x 4.5"(D).Power: 5 VDC, 1 A, power consumption: 4.5 W.Media type supported: Cat 5 twisted-pair.Protocol: CSMA/CD.LED indicators:/port: Link/Activity/Speed,/device: power.Management: QoS: 802.1p (4 Queues), Priority queuing.Form factor: Desktop, wall mountable, MTBF: 593,755 hours.Supports jumbo frame packets (max size up to 9.6KB).Network technology: 10/100/1000Base-T Gigabit Ethernet.Certification & standards: FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, CB.Weight: 0.57 lbs..Warranty: Lifetime limited.Warranty: Lifetime limited.1.1"(H) x 3.8"(W) x 3.9"(D).Limited lifetime warranty.D-Link Five-Port Unmanaged Switch - Easy Networking

The Cisco Catalyst 9300 Series switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At up to 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise technology, providing flexible deployment with support for nonstop forwarding with Stateful Switchover (NSF/SSO), for the most resilient architecture in a stackable (sub-50-ms) solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Power over Ethernet Plus (PoE+), 60W Cisco Universal Power over Ethernet (Cisco UPOE) and 90W Cisco UPOE+ ports..Rack mountable switch is stackable enterprise switching platform built for security, IoT, mobility, and cloud.Contains 48 fixed uplink PoE+ and four 1Gb uplink ports.Cisco IOS XE, a modern operating system for the enterprise with support for model-driven programmability including NETCONF, RESTCONF, YANG, on-box Python scripting, streaming telemetry.Dimensions: 1.73"H x 17.5"W x 16.1"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.Cisco UADP 2.0 Application-Specific Integrated Circuit (ASIC) with programmable pipeline and microengine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.USB 2.0 slot to load system images and set configurations.Up to 424Gbps of local stackable switching bandwidth.Deeper buffer and higher-scale model options for rich multimedia content delivery applications.Leading PoE capabilities with up to 384 ports of PoE per stack, PoE+, and high density IEEE 802.3bt - 60W UPOE, and 90W Cisco UPOE+.Intelligent Power Management with Cisco StackPower technology, providing power stacking among members for power redundancy.Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64000 flows.Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Lifetime manufacturer limited warranty

18312606ba85f9c38ee17cfae1fedfb7.Access Control Lists (ACLs).D-Link Safeguard Engine protects the CPU from broadcast/multicast/unicast flooding.Port Security supports up to 64 MAC addresses per port.ARP Spoofing Prevention.Smart IP-MAC-Port Binding.DHCP Server Screening.Web-based Graphical User Interface - Standard Mode or Surveillance Mode.D-Link Network Assistant Utility.Simplified CLI through Telnet.Built-in SNMP MIB for remote NMS (D-View 7.0)

The Cisco Catalyst C9300-48UXM-E switch are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Catalyst C9300-48UXM-E switch forms the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At up to 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst C9300-48UXM-E is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switch is also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch..Ethernet switch with 48-port modular uplinks and 12 mGig copper ports, UPOE and Network Essentials, built for security, IoT, mobility, and cloud.Dimensions: 1.73"H x 17.5"W x 19.1"D.Comes in gray.Provides up to 480Gbps of local stackable switching bandwidth; equipped with USB 2.0 slot to load system images and set configurations.Flexible and dense uplink offerings with 1G, Multigigabit, 10G, 25G, and 40G in the form of modular uplinks.Easy transition from 10G to 25G with dual-rate optics.Line-rate, hardware-based Flexible NetFlow (FNF), delivering flow collection of up to 64000 flows.Support for both static and dynamic NAT and Port Address Translation (PAT).Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.IEEE 802.1ba AV Bridging (AVB) is built in to provide a better audio and video experience through improved time synchronization and QoS.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network.Plug-and-Play enabled.Support for AES-256 with the powerful MACsec 256-bit encryption algorithm.Comes with x86 CPU complex with 8GB memory, 16GB of flash, and external USB 3.0 SSD pluggable storage slot (delivering 120GB of storage with an optional SSD drive) to host containers.Features UADP 2.0 application-specific integrated circuit (ASIC) with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, access-control lists (ACLs), and quality of service (QoS) entries.Meets or exceeds UL 60950-1, CAN/CSA-C222.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1, IEEE 802.3 standards.Lifetime manufacturer limited warranty

Create your own LAN and connect your PC, laptop, printer and other peripherals with the help of 4 ports..Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Managed switch provides a reliable foundation for your network

Cisco Catalyst 9200 series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 series switches give you what you need now with investment protection on future innovations..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ 4x1G uplink ports.Supports Cisco IOS XE software that opens a completely new paradigm in network configuration, operation, and monitoring through network automation.Operational efficiency, supporting stacking bandwidth up to 80Gbps.Dimensions: 1.73"H x 17.5"W x 11.3"D.Provides optimum power saving with Energy-Efficient Ethernet (EEE) on the RJ45 ports and low-power operations for the perfect power management and power consumption capabilities.Features 2GB DRAM, 4GB flash memory.Resiliency with field-replaceable units (FRU) and redundant power supply, fans, and modular uplinks.Provides infrastructure investment protection by allowing a nondisruptive migration from 1G to 10G and beyond.Offers Gigabit Ethernet speeds with intelligent services that keep traffic flowing smoothly, even at 10 times the normal network speed; industry-leading mechanisms for cross-stack marking, classification, and scheduling deliver superior performance for data, voice, and video traffic at wire speed.IP unicast routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and Open Shortest Path First [OSPF], Routed Access) are supported for small network routing applications with the Network Essentials stack; equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Advanced network monitoring using full Flexible NetFlow.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I equipment standards.Lifetime manufacturer limited warranty

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE® and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access. Catalyst 9200 Series switches also provide operational choice of Cisco DNA Center, or cloud monitoring for Catalyst..This 24 Gigabit Ethernet switch extends the power of intent-based networking and hardware. and software innovation to a broader set of deployments.Full Power over Ethernet Plus (PoE+) capability for up to 48 ports.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160Gbps.Enhanced security with AES-128 MACsec encryption.Flexible downlink options with data, PoE+, or mGig.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE).Simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network

HPE Aruba 9000 series gateways provide high-performance networking, SD-WAN and security functionality in compact and cost-effective form factors. Perfectly suited for branch and small campus networks, the 9000 series gateways serve a key role within Aruba's SD-Branch solution, which unifies WLAN, LAN, SD-WAN and security for distributed enterprises. The 9000 Series can be easily configured and managed using Aruba Central, a cloud-based network operations, assurance and security platform. Onsite deployment is accomplished with a simple mobile installer application..Rack-mountable switch provides high-performance networking, SD-WAN, and security functionality in compact and cost-effective form factor.Contains 12 100/1000BASE-T ports (six PoE+ ports).Can be easily configured and managed using Aruba Central, a cloud-based network operations, assurance and security platform.Provides connectivity for up to 2048 users or client devices at up to 6Gbps of firewall throughput.Dimensions: 1.72"H x 15.55"W x 10.24"D.Maximum power consumption: 160W (with 120W of POE).Meets or exceeds UL, CAN/CSA-C22.2, EN, IEC, FCC, VCCI, FCC/ISED, MIC, NCC, ANATEL, COFTEL, CCC, KN32, KN35 standards.Cloud-managed and purpose-built for branch SDWAN requirements.Up to 10 times the performance and 80 times the client density of typical SD-WAN appliances.Unified policy enforcement for wired and wireless traffic through Aruba Dynamic Segmentation.Visibility into over 3000 applications with no added hardware.Includes flexible connectivity options, with up to 12 Ethernet ports (six PoE+) that can be used as access/WAN uplinks, a USB 3.0 port for cellular connectivity, and an IoT radio that supports Bluetooth 5, Zigbee, and near-field communication (NFC) wireless protocols.Can also be repurposed as Mobility Controllers starting with ArubaOS 8.5 software to provide WLAN and LAN services, such as Dynamic Segmentation, stateful firewall, and live upgrades.Features a Layer 4-7 stateful firewall with PEF to deliver a consistent user, device, and application awareness across WLAN, LAN, and WAN.1-year manufacturer limited warranty

The D-Link DGS-1100 series' web user interface gives administrators an easy way to manage Layer 2 features, such as VLANs, Spanning Tree Protocol (STP), and link aggregation (desktop models utilize Static Trunk). With powerful security features including IGMP snooping, Static MAC, and Storm Control, these smart-managed switches are a versatile solution for deployments that require easy-to-configure functionality without added complexities. D-Link's free Network Assistant (DNA) utility displays all your connected devices and makes first-time configuration a breeze. The free D-View 7 Network Management System comes with a license for 25 nodes and two probes and full access to the management tools. The desktop models in the series utilize a fanless design, for silent and energy-efficient operation..Eight-port gigabit smart managed switch is a powerful and flexible networking solution for small, medium, and enterprise businesses.Switching capacity: 16Gbps; packet forwarding rate: 11.9Mpps.Comes in a compact fanless desktop design for silent and energy-efficient operation.Features a complete web interface for comprehensive switch management.Free D-View 7 Network Management System comes with a license for 25 nodes, two probes, and full access to the management tools.Maximum power consumption: 4.94W.With powerful security features including IGMP snooping, Static MAC, and Storm Control, these smart managed switches are a versatile solution for deployments that require easy to configure functionality without added complexities.Features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily.Loopback Detection detects loops created by a specific port and automatically shuts it down.Cable Diagnostics feature is designed for network administrators to quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors.Advanced D-Link Green technology allows to save power without sacrificing performance.Supports half/full-duplex operation (half at 10/100 Mbps, full at 1000 Mbps).IEEE 802.3az compliant and features Link Status detection.Lifetime manufacturer limited warranty

The DGS-1100 Series is a range of switches designed to meet the requirements of small, medium, and enterprise businesses. Support for multiple PoE standards make the DGS-1100 Series ideal for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to meet your networking requirements..Number of Ethernet Ports 16, Network Management Type Managed.Network Technology: 10/100/1000Base-T.Ethernet Technology: Gigabit Ethernet.Switch Form Factor: Rack-mountable, Desktop.Wireless Connectivity: Not Applicable.Power Source: Power Supply.Media Type Supported: Twisted Pair.Limited Lifetime Warranty

D-Link DGS-1100 series is a range of switches designed to meet the requirements of small, medium, and enterprise businesses. Support for multiple PoE standards make the DGS-1100 series perfect for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to meet your networking requirements..Desktop switch offers highly flexible solution for the needs of a diverse range of businesses with support for PoE, advanced management, troubleshooting tools, and energy-efficient technology.Contains eight 10/100/1000Mbps ports (PoE).Supports an intuitive client-based utility (D-Link Network Assistant) and a web-based management interface.IGMP snooping is able to reduce the load of L3 multicast routers and save bandwidth in network throughput.Dimensions: 1.1"H x 6.7"W x 3.9"D.Maximum power consumption: 77.9W (PoE on), 4.6W (PoE off).Certifications and standards: Meets or exceeds FCC Class B, CE Class B, VCCI Class B, BSMI, cUL, CE LVD, CB standards.Fanless design for a longer product life and silent operation.Bandwidth Control ensures latency-sensitive traffic always gets the bandwidth it needs.Quality of Service further prioritizes latency-sensitive traffic, ensuring timely delivery.Segregate different types of traffic, such as surveillance or voice, with VLANs to heighten security.PD Alive feature automatically reboots malfunctioning connected PoE devices to mitigate downtime.Innovative energy-saving features are good for your budget, as well as the environment.Equipped with advanced security features, such as static MAC, storm control, and IGMP snooping.Features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily.Provides Power over Ethernet (PoE) support, reducing deployment time for IP cameras, VoIP phones, and access points.Can be powered by a PoE switch or injector, allowing for more flexible installation in remote areas with no available power outlets.Comes in black

Cisco Catalyst C9200L switch extends the power of intent-based networking and hardware and software innovation to a broader set of deployments. With its family pedigree, Cisco Catalyst C9200L switch offers simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Cisco Catalyst C9200L switch helps customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Cisco Catalyst C9200L switch provides security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Cisco Catalyst C9200L switch gives you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 80 Gbps, Layer 3 feature support, and cold patching, Cisco Catalyst C9200L switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..48x 10M/100M/1G Ethernet switch with fixed 4 x 1G uplink ports extends the power of intent-based networking and hardware and software innovation to a broader set of deployments.Dimensions: 1.73"H x 17.5"W x 12.9"D.Comes in gray.IP unicast routing protocols (including static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and Open Shortest Path First [OSPF], Routed Access) are supported for small network routing applications with the Network Essentials stack.Offers resiliency with field-replaceable units (FRU), redundant power supply, and fans.Features flexible downlink options with data, PoE+, or mGig.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Switch has enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Features advanced network monitoring using Full Flexible NetFlow.Get simplified operations and deployment with policy-based automation from edge to cloud managed with Cisco Identity Services Engine (ISE) and network assurance and improved resolution time through Cisco DNA Center.Plug-and-Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.Common Licensing based operating system for the enterprise (Cisco IOS XE) supports for model-driven programmability and streaming telemetry.ASIC has programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, access-control lists (ACLs), and quality of service (QoS) entries.Lifetime manufacturer limited warranty

The HP® Aruba 2930F 24-port PoE+ fixed port managed Gigabit Ethernet switch provides high-performance and resiliency for a digital workplace campus network. A powerful Aruba ProVision ASIC delivers performance and value, supporting the latest SDN applications with future proof programmability, as well as it supports 10GbE uplinks, PoE+, robust QoS and RIP routing. The switch provides better application experience with low latency and virtualization. The switch provides you an unmatched quality of service with trusted security that meets corporate policies and compliance requirements. The switch supports Aruba ClearPass policy manager for unified and consistent policy between wired and wireless users with simplified implementation and management for guest login, network access and other network policies..Fixed port managed gigabit Ethernet switch provides a reliable infrastructure for your business network.Dimensions: 4.39 cmH x 44.25 cmW x 30.42 cmD.Compatible with PC.Comes in black color.Memory: 1GB DDR3 SDRAM, buffer memory: 12.38MB 4.5MB Ingress/7.785 Egress, 4GB eMMC, processor: Dual Core ARM Coretex A9 at 1016 MHz.Interfaces/ports: 24 x RJ-45 autosensing 10/100/1000 PoE+ ports, 4 x SFP.Media type supported: Twisted pair, optic fiber, network technology: 10/100/1000Base-T, 1000Base-X.Layer supported: 3.Ethernet technology: Gigabit Ethernet.MAC address table: 32K entries.Throughput: Up to 41.7 Mpps, routing/switching capacity: 56 Gbps.Latency: 1000 Mbps latency: < 3.8 us.Management: Aruba AirWave network management, IMC - Intelligent Management Center, command-line interface, web browser, configuration menu.Power: 120 - 230 VAC 50/60 Hz redundant power supply, PoE capability: 370 W PoE+.Form factor: 1U rack-mountable, Desktop.Includes Aruba 2930F 24G PoE+ 4SFP switch, 1 x power cord, 1 x screw kit, 4 x mounting ears, 4 x bumper feet, 1 x cable tie.Meets FCC part 15 Class A, VCCI Class A, EN 55022 Class A, CISPR 22 Class A, EN 55024, EN 61000-3-2 2000, 61000-3-3, ICES-003 Class A, RoHS standards.Weight: 3.9 kg.Comes with limited lifetime warranty

The Cisco Catalyst 9500 series switches are the next generation of enterprise-class core and aggregation layer switches, supporting full programmability and serviceability. Based on an x86 CPU, the Cisco Catalyst 9500 series is Cisco's lead purpose-built fixed core and aggregation enterprise switching platform, built for security, IoT, and cloud. The switches come with a 4-core x86, 2.4-GHz CPU, 16-GB DDR4 memory, and 16-GB internal storage. The Cisco Catalyst 9500 series is the industry's first purpose-built 25, 40 and 100 Gigabit Ethernet line of switches targeted for the enterprise campus. These switches deliver unmatched table scale (MAC/route/ACL) and buffering for enterprise applications. The Cisco Catalyst 9500 series includes nonblocking 40 and 100 Gigabit Ethernet Quad Small Form-Factor Pluggable (QSFP+, QSFP28) and 1, 10 and 25 Gigabit Ethernet Small Form-Factor Pluggable Plus (SFP/SFP+/SFP28) switches with granular port densities that fit diverse campus needs. The switches support advanced routing and infrastructure services (such as Multiprotocol Label Switching (MPLS) Layer 2 and Layer 3 VPNs, Multicast VPN (MVPN), and Network Address Translation (NAT); Cisco Software-Defined Access capabilities (such as a host tracking database, cross-domain connectivity, and VPN Routing and Forwarding (VRF)-aware Locator/ID Separation Protocol (LISP); and network system virtualization with Cisco StackWise virtual technology that are critical for their placement in the campus core. The Cisco Catalyst 9500 Series also supports foundational high-availability capabilities such as patching, Cisco Nonstop Forwarding with Stateful Switchover (NSF/SSO), redundant platinum-rated power supplies, and fans..Rack-mountable switch is the next generation of enterprise-class core and aggregation layer switches, supporting full programmability and serviceability.Contains 16-port 1/10 Gigabit Ethernet switch with SFP/SFP+.Programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks, so they can focus instead on innovation that positively transforms your business.Up to 6.4Tbps switching capacity with up to 2Bpps of forwarding performance.Dimensions: 1.73"H x 21.52"W x 17.5"D.Features 16GB DRAM, 16GB flash memory, quad-core x86, 2.4GHz CPU.Up to 512000 Flexible NetFlow (FNF) entries in hardware.Up to 212000 routing entries (IPv4/IPv6) for high-end campus core and aggregation deployments.IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks.IEEE 802.1ba AV Bridging (AVB) built-in to provide a better AV experience through improved time synchronization and QoS.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy, making it suitable for distribution and synchronization of time and frequency over the network.Support for both static and dynamic NAT and Port Address Translation (PAT).Scalable routing (IPv4, IPv6, and multicast) tables and Layer 2 tables.Support for AES-256 with the powerful MACsec 256-bit encryption algorithm available on all models.Meets or exceeds UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1, GB4943 standards.Lifetime manufacturer limited warranty

Netgear 300 Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Managed switch delivers essential business networking features and powers PoE+ devices such as VoIP phones, IP cameras, and more.Contains 16 x 10/100/1000 RJ45 copper ports (auto uplink).Business-friendly and easy-to-use web browser-based management GUI.Dimensions: 1.06"H x 11.26"W x 4.02"D.Certifications and standards: Meets or exceeds CE mark, FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Fanless design for silent operation makes this switch perfect for noise-sensitive environments.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.16 ports provide up to 1000Mbps of dedicated, non-blocking bandwidth each.10Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.15 PoE+ ports provide a total of 231W of power so you can power and connect your devices with a single wire.Manage PoE prioritization, PoE power limit per port, PoE scheduling, and more for simple control over all PoE-powered devices.Simple, yet useful network set-up on top of plug-and-play connectivity.Quality of Service (QoS) for traffic prioritization.Port mirroring for network monitoring.Rate limiting for better bandwidth allocation.Features auto "denial-of-service" (DoS) prevention, troubleshoot connection issues via cable test, loop prevention, loop detection, broadcast storm controls.5-year manufacturer limited warranty

The TRENDnet TEG-204WS 20-port Gigabit Ethernet rack mountable web smart switch in black, has fanless design and delivers advanced management features with a 40 Gbps switching capacity. It has 16 x Gigabit ports and 4 x shared Gigabit ports (RJ-45/SFP). This switch features local dial in user authentication, 802.1X Port-Based network access control, RADIUS and TACACS+ security systems. It is suitable for traffic control, troubleshooting, access controls and monitoring..Gigabit Ethernet web smart switch provides faster throughput.Ports: (16) Gigabit ports, (4) shared Gigabit ports (RJ-45/SFP).Management: HTTP/HTTPS (SSL v2/3 TLS) web based GUI, SNMP v1, v2c, v3, RMON v1, static unicast Mac address, security: Local dial in user.Dimensions: 1.7"H x 11"W x 7"D.Power consumption: 14.6 W (maximum).Certifications and standards: Meets CE, FCC and UL standards.Has fanless design.Input voltage: 100 to 240 VAC, 50/60 Hz, internal power supply.Form factor: 1U rack mountable, color: Black.Data transfer rate: 20 Mbps (full duplex) Ethernet, 200 Mbps (full duplex) Fast Ethernet, 2000 Mbps (full duplex) Gigabit Ethernet.RAM buffer: 512KB, Mac address table: 8K entries, jumbo frames: 10KB, forwarding rate: 29.8 Mpps (64 byte packet size).Layer supported: 2, media type supported: Twisted pair, optical fiber, network technology: 10/100/1000Base-T, 1000Base-X.Port mirror: RX, TX or both, one-to-one, protocols: IP protocol 0-255, TCP/UDP port 1-65535.Compatible with optional software utility Windows 10, 8.1, 8, 7, Vista, XP, Windows 2003/2008 server.Includes quick installation guide, CD-ROM (utility and users guide), 6' power cord and rack mount kit.Features IPv6, LACP, VLAN, QoS and IGMP snooping, private and voice VLAN support, metal housing and 802.3ad dynamic LACP.Weight: 3.88 lbs..Comes with 3 year warranty

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE Compliant Managed Network.No. & Type of Ports: 8-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 11 x 6.7 x 1.7".Power Consumption: 151.4 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Netgear Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Desktop managed switch with PoE meets business networks' growing need by providing fundamental network features that will help optimize the performance of business networks.Contains five 10/100/1000 RJ45 copper ports (auto uplink).Enable network configuration and management at the price point of unmanaged switches.Dimensions: 1.1"H x 6.2"W x 4"D.Certifications and standards: Meets or exceeds CE mark, commercial FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Simple, yet useful network set-up on top of plug-and-play connectivity.Business-friendly and easy-to-use web browser-based management GUI.VLAN support for traffic segmentation.Quality of Service (QoS) for traffic prioritization.Auto “denial-of-service” (DoS) prevention.Troubleshoot connection issues via cable test.Features port mirroring for network monitoring, jumbo frame support, per port PoE controls, uninterrupted PoE keeps PoE power on even when the switch is updating firmware or performing software reboot, 802.3at standard offering 30W/port.5-year manufacturer limited warranty

The Grandstream GWN7806P is a Layer 2+ managed switch engineered for small-to-medium business networks. It features 48 Gigabit Ethernet RJ45 ports with PoE/PoE+ support and 6 SFP+ uplinks, delivering up to 216Gbps switching capacity. Each port supports up to 30W, with a total PoE budget of 400W, managed via smart power control. The switch includes advanced reliability features like fault detection, dual boot, and link aggregation, along with robust security protocols such as ARP inspection, IP source guard, and DoS protection. With built-in QoS, stacking support for up to 16 switches, and management via GWN.Cloud or GWN Manager, the GWN7806P offers scalable, secure, and intelligent switching for modern enterprise networks..48 Gigabit RJ45 ports and Layer 2+ managed switching for enterprise networks..PoE/PoE+ with smart power control and 30W per port, totaling 400W..216Gbps switching capacity with 6 SFP+ uplinks for high-speed backbone..Mounts on desktop or rack with included installation accessories..Enables SNMP v1/v2c/v3 for remote diagnostics and network monitoring..Prioritizes traffic using advanced QoS with shaping, mapping, and scheduling..Secures networks with ARP inspection, IP guard, DoS protection, and port isolation..Operates with VLANs, link aggregation, and stacking support for up to 16 switches..Uses internal PSU with surge protection and efficient power allocation..Certified by FCC, CE, RCM, IC, and UKCA for global compliance and safety standards.

Allied Telesis™ Managed WebSmart gigabit ethernet switch features 10/100/1000Base-T network technology. Switch has web-based management protocol and supports 2 layer communication..Ethernet technology: Gigabit Ethernet, Network technology: 10/100/1000Base-T, Media type supported: Twisted pair.Interfaces/ports: 16 x RJ-45.Dimensions: 1.7"(H) x 13.9"(W) x 8.5"(D).Form factor: Wall-mountable, rack-mountable.Management protocols: Web-based management, port-based VLAN, 802.1p QoS, port trunking/link aggregation, port mirroring, priority queue's, spanning tree, statistics & diagnostics.Layer supported: 2.Expansion slots: 2, Expansion slot details: 16 x Gigabit Ethernet network, 2 x Fast Ethernet expansion slot.Temperature: 32 - 104 deg F, Humidity: 5 - 90%, Voltage: 110 - 220 VAC input.Includes: AT-GS950/16 16 port Gigabit webSmart switch, wall & 19" rack-mount brackets, U.S. power cord.Certifications: IEEE 802.3x, UL 1950, FCC/EN55022 Class A, VCCI-Class A, C-Tick, EN60950 (TUV), EN55024, CE.Weight: 5.25 lbs..Warranty: Lifetime limited.Allied Telesis™ Managed WebSmart gigabit ethernet switch has 16 interface ports and is rack-mountable.

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE Compliant Managed Network Switch with SFP.No. & Type of Ports: 8-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 11 x 6.7 x 1.7".Power Consumption: 65 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Ubiquiti UniFi Switch Pro 48 PoE is a fully managed Layer 3 switch with eight 802.3bt (PoE++) and 40 802.3at (PoE+) Gigabit Ethernet ports. Four 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi Pro is the perfect access layer switch for any UniFi solution – it combines up to 600W of near-silent PoE power with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed Layer 3 switch with eight 802.3bt (PoE++) and 40 802.3at (PoE+) Gigabit Ethernet ports.Contains eight Gigabit RJ45 802.3bt PoE++ ports, 40 Gigabit RJ45 802.3at PoE+ ports, four 10G SFP+ ports.UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all the switch features in an intuitive graphical user interface from anywhere.Dimensions: 1.72"H x 17.42"W x 15.73"D.Max. power consumption (excluding PoE output): 60W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.In addition to Layer 2 switching protocols and features, offers Layer 3 capabilities, such as inter‑VLAN routing, static routing, and DHCP server functionality.Can be located in any workspace; its integrated fans have built-in PWM (power management) control, air ducts and covers, and temperature sensors for the best user experience.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.Comes in silver.2-year manufacturer limited warranty

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit Managed Network Switch with SFP.No. & Type of Ports: 24-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 11 x 6.7 x 1.7".Power Consumption: 5.9 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Netgear 300 Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Managed switch delivers essential business networking features and powers PoE+ devices such as VoIP phones, IP cameras, and more.Contains 16 x 10/100/1000 RJ45 copper ports (auto uplink).Business-friendly and easy-to-use web browser-based management GUI.Dimensions: 1.06"H x 11.26"W x 4.02"D.Certifications and standards: Meets or exceeds CE mark, FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Fanless design for silent operation makes this switch perfect for noise-sensitive environments.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.16 ports provide up to 1000Mbps of dedicated, non-blocking bandwidth each.10Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.15 PoE+ ports provide a total of 180W of power so you can power and connect your devices with a single wire.Manage PoE prioritization, PoE power limit per port, PoE scheduling, and more for simple control over all PoE-powered devices.Simple, yet useful network set-up on top of plug-and-play connectivity.Quality of Service (QoS) for traffic prioritization.Port mirroring for network monitoring.Rate limiting for better bandwidth allocation.Features auto "denial-of-service" (DoS) prevention, troubleshoot connection issues via cable test, loop prevention, loop detection, broadcast storm controls.5-year manufacturer limited warranty

D-Link® 10-port Managed gigabit ethernet switch features 10 gigabit Ethernet technology and 10/100/1000base-T network technology respectively. Switch has 8000 MAC addresses database..PoE switch.Dimensions: 1.73"H x 11.02"W x 7.08"D.Compatible with PC.Comes in black/silver color.Interfaces: 8 x 10/100/1000BASE-T PoE, 2 x SFP.Media type supported: Twisted pair, optical fiber, twisted pair cable standard: Category 5e, Ethernet technology: Gigabit Ethernet.Layer supported: 3, PoE standard: IEEE 802.3af & IEEE 802.3at, PoE capable ports: Ports 1 to 8: Up to 30W.Form factor: Rack mountable, desktop, network cables: UTP Cat.5, Cat.5e (100m max), EIA/TIA-568 100-ohm STP, transmission method: Store-and-forward.Manageable, management: VLAN, QoS, MIB, Syslog, diagnostic LEDs: Power (per device), PoE Max (per device), link/activity/speed.Switching capacity: 40 Gbps, MAC address table: 16, 000 entries per device, packet forwarding rate: 14.88 Mpps, packet buffer memory: 1.5MB.IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX (Fast Ethernet), IEEE 802.3ab 1000BASE-T (Gigabit Ethernet), auto-negotiation.Security: Broadcast multicast/unicast storm control, D-Link safeguard engine, DHCP server screening.IP-MAC-Port binding (smart binding) - Supports 512 address binding entries, ARP inspection, ARP + IP inspection, supports DHCP Snooping.Power source: Power supply, input voltage: 120 - 230 VAC, PoE power budget: Max. 78 W.Operating temperature: 23 - 122 deg F, storage temperature: -4 to 158 deg F, humidity: 0 - 95 % non-condensing (operating/storage).Meets FCC Class A, CE Class A, ICES-003, VCCI Class A, C-Tick, BSMI, Safety, cUL, CE LVD, ENERGY STAR, WEEE standards.Weight: 3.1 lbs..D-Link® 10-port Managed gigabit ethernet switch is compatible with 1U rack unit and requires input voltage of 110/220 VAC.

This eco-friendly WebSmart switch conforms with the Allied Telesis commitment to environmentally friendly processes and products. It is designed to minimize power consumption through the use of a high efficiency power supply..Network management type: Smart switch.Ports: 24 ports.Port configuration: 24 x RJ-45 10/100/1000Base-T.Buffer memory: 512 KB.Address database size: 8000 MAC addresses.Lifetime limited warranty.Management: Web based management, Port based VLAN, 802.1p QoS, port trunking.Static multicast group.Spanning tree, 802.1d/w.Power: 120 - 230 VAC, 50 / 60 Hz.Number of SFP slots: 4.Number of total expansion slots: 4.Media type supported: Twisted pair.Includes: AT-GS950/24 24 port gigabit websmart Switch, wall and 19" rack mount brackets, U.S. power cord.Compliant standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x.Allied Telesyn™ AT-GS950/24 Ethernet Switch features 24 ports, twisted pair, and gigabit ethernet.

The Grandstream GWN7813P is a high-performance Layer 3 managed switch designed for medium-to-large enterprise networks. Featuring 24 Gigabit Ethernet ports with PoE++ support and 4 10G SFP+ uplinks, it delivers up to 128Gbps switching capacity for seamless data flow. Smart power control enables dynamic PoE allocation per port, with a total budget of 360W and up to 60W per port. Advanced security features like ARP inspection, IP source guard, and DoS protection safeguard your network, while built-in QoS and ACL filtering optimize traffic prioritization. The GWN7813P supports IPv4/IPv6 routing, stacking, and is managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms. Its versatile mounting options and robust design make it ideal for scalable, secure, and intelligent business deployments..24 Gigabit ports and Layer 3 managed switching for enterprise-grade control..Enables dynamic PoE++ allocation with up to 60W per port and 360W total power budget..Up to 128Gbps switching capacity and supports 4 high-speed 10G uplinks..Suitable for desktop, wall, or rack mounting with included installation accessories..Supports SNMP v1/v2c/v3 for remote monitoring and network diagnostics..Prioritizes traffic using advanced QoS with shaping, scheduling, and rate limiting..Secures networks with ARP inspection, IP guard, DoS defense, and port isolation..Operates with VLANs, link aggregation, and dynamic routing protocols like OSPF and BGP..Optimizes energy use with smart power control and efficient fan speed adjustment..Certified by FCC, CE, RCM, IC, and UKCA for global compliance and safety standards.

HP? J9822A Managed switch with 4GB of standard memory and 16MB flash memory for high-computing operation. This rack mountable switch has input voltage of 120 VAC/230 VAC. Comes with 12 switching and management expansion slots. Supports layer 3 for effective communication over the network..Switch for office-core deployments.Measures 12.1" x 17.5" x 17.8".Features manageable switch for easy configuration.Has rack-mountable configuration and operating voltage of 120 - 230 VAC.Has freescale P2020 dual core at 1.2 GHz, 16MB flash, 1GB SD Card, 4GB DDR3 SODIMM memory.Has 1000MB latency less than 2.9 micros, 10 Gb/s latency less than 2 micros and throughput up to 785.7 Mpps.Has 12 open module slots and supports a maximum of 96 10GbE ports for flexibility.Has routing/switching capacity of 1 Tbps, switch fabric speed of 2 Tbps and 7U compatible rack unit.Features intelligent management center, command-line interface, web browser, configuration menu and out-of-band management.Has SNMP v1/v2c/v3, sFlow, CLI, DHCP, VLAN, web based management, telnet.Has operating temperature range of 32 - 113 deg F operating, -40 - 158 deg F storage, Humidity of 15 - 95percentage for precise operation.Includes 5406R zl2 switch, 1 x 5400R zl2 management module (J9827A), 1 x 5412R zl2 switch fan tray (J9832A), mounting kit.Meets Safety: CSA 22.2 No. 60950, UL 60950, Emissions: FCC part 15 Class A, EN 55022 standards.Weighs 17.28 kg.Comes with lifetime limited warranty.HP® Managed switch has routing/switching capability of 1 Tb/s and switch fabric speed of 2 Tb/s. With unprecedented flexibility, this switch is perfect for office-core deployments.

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE-Compliant Managed Network Switch with SFP.No. & Type of Ports: 16-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 17.3 x 7.9 x 1.7".Power Consumption: 130 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

SonicWall secure switch integrates seamlessly with SonicWall SD-WAN solution to transform WAN edge at the branch. This technology allows organizations and enterprises with branch locations to build highly available and higher-performance WANs. By using low-cost internet access (broadband, 3G/4G/LTE, fiber), organizations can cost-effectively replace expensive WAN connection technologies such as MPLS with SD-WAN. Business-critical applications can be automatically steered over highly available links which ensures reliability. Application delivery is further automated using link quality, latency, jitter, packet loss or capacity with dynamic path selection based on applications, IP addresses or services. This ensure businesses are set up for a highly available and performance-optimized transformation at the WAN edge..This 10-port Gigabit Ethernet managed switch offers an end-to-end security solution that simplifies deployment, management and troubleshooting.Supports power over Ethernet.Provide up to 24 Gbps data transfer rate.Desktop design for convenient use.Zero-Touch Deployment organizations to quickly and securely configure the switch at new locations without requiring advanced and costly on-site personnel.Integrates seamlessly with SonicWall SD-WAN solution to transform WAN edge at the branch.Can be easily managed from the cloud via CSC's SPOG dashboard; it provides unified management, reporting and analytics, delivering complete network visibility.Comes with 3-year support

The EnGenius Fit Managed Switch EWS2910P-FIT is an 8-port Gigabit PoE Layer 2 plus switch with a 55W PoE budget and 2 SFP uplink ports. It offers multiple management options for small business network environments, allowing you to select the cloud or on-premises management option that best suits your needs. With its business-class features, the EnGenius Fit Managed Switch provides secure, reliable, and high-performance switching while reducing capital and operating expenses for cost-conscious small businesses..Features 8 Ethernet ports, classified under Gigabit Ethernet performance, with Managed network management for advanced control and configuration..Delivers PoE+ (Power over Ethernet Plus) on all 8 ports, supplying up to 30W per port with a total power budget of 110W for connected devices like IP cameras and access points..Offers a data transfer rate of up to 20 Gbps..Designed with a wall-mountable form factor for flexible and space-saving installation..Supports Quality of Service (QoS) to prioritize bandwidth for critical applications like voice, video, and data traffic..Management capability provides control over setup and configuration of your network..Certified with CE, FCC, and IC standards for safety, electromagnetic compatibility, and wireless communication compliance.

The Ubiquiti Switch Enterprise has a 124 Gb/s with 62 Gb/s non-blocking throughput and a 92.25 Mpps forwarding rate for smooth data transfers..(12) 2.5 GbE, (12) GbE; all PoE+ ports.(2) 10G SFP+ ports.400W total PoE availability.DC power backup-ready.Layer 3 switching.Remote firmware upgrade.Manage your networks from a single control panel

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x 10Gbps SFP+ ports engineered for gigabit AV over IP.8 PoE+ ports (30W/port) provide a total of 240W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

The Sonicwall switch delivers high-speed network switching while providing unparalleled performance and manageability through SonicWall firewalls or Wireless Network Manager. Its unified security posture, high port density, Power over Ethernet (PoE) options, and Gigabit or 10 Gigabit performance capabilities makes it perfect for small and medium-sized business (SMB), and Software-Defined Branch (SD-Branch) deployments. This enables businesses – big or small, to undergo digital transformation and keep pace with the changing network and security landscape..Switch delivers high-speed network switching while providing unparalleled performance and manageability through SonicWall firewalls or Wireless Network Manager.Contains 48 Gigabit Ethernet ports and four SFP+ ports.Managed via firewalls or Wireless NetworkManager (WNM) for unified, single-pane-of-glass management.Offers a compact form factor with an energy-efficient design.Power consumption (maximum): 885W.Meets or exceeds FCC, ICES, CE (EMC Class A, LVD, RoHS), C-Tick, VCCI Class A, UL cUL, TUV/GS, CB, Mexico UL DGN notification, WEEE, REACH, BSMI, KCC/MSIP, ANATEL standards.Dimensions: 1.73"H x 17.32"W x 12.2"D.Prioritizes certain traffic on the network such as VOIP for video conferences while working from home, with features such as QoS.Features centralized VLAN configuration, static/dynamic LAG, STP, LLDP/MED, static routing, IPv4 management, SSH, firewall management, standard CLI and Web GUI interface, software upgrade/downgrade via TFTP/Firewall/GUI.Security and visibility: 802.1x authentication, Syslog Collection, IP/MAC ACL, ACL, IEEE 802.1x authentication port-based, IEEE 802.1x Guest, and Fallback VLAN.Includes 1 year of 24/7 support

The EX4100-F-12P, which is a compact, fanless switch offering 12 x 1GbE Power over Ethernet Plus (PoE+) access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter. EX4100-F-12P can also be powered from an external 90W power sourcing equipment (PSE) device connected via the uplink port. Additional 90W of PoE budget is available if the second uplink port is connected to a PSE device. With external power adapter and the two uplink ports connected to 90W external PSE, total PoE power budget supported is up to 300W..Managed switch with 12 x 10/100/1000BASE-T PoE+, 2 x 100Mb/1GbE/2.5GbE/5GbE/10GbE uplinks, 4 x 10GbE stacking/uplink ports, with Standard SW ports.The EX4100-F-12P fanless switch offering 12 x 1GbE PoE+ access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter.Features 256Gbps switching capacity.Comes in 1 RU form factor.SNMP: v1, v2c, v3; RFC 1157 SNMPv1, RFC 2011 SNMPv2 for Internet Protocol using SMIv2, RFC 2012 SNMPv2 for transmission control protocol using SMIv2.Quality of Service (QoS): L2 QoS, L3 QoS, ingress policing: one rate two color, 12 hardware queues per port (eight unicast plus four multicast), Strict priority (SP) and weighted deficit round-robin (WDRR) scheduling methods (egress), 802.1p, (DSCP)/IP precedence trust and marking, L2-L4 classification criteria.Meets or exceeds the CAN/CSA-C22.2 No. 62368-1 and 60950-1, UL 62368-1 and 60950-1, IEC 62368-1 and 60950-1 (All country deviations): CB Scheme report, IEC 62368-3 for USB and PoE: CB Scheme report, CFR, Title 21, Chapter 1, Subchapter J, Part 1040, REDR c 1370 OR CAN/CSA-E 60825-1- Part 1, IEC 60825-1, IEC 60825-2, and TAA standards.Onboard (day 0), provision (day 1), and manage (day 2+) the EX4100-F from the cloud with Juniper Mist Wired Assurance, using AI-driven automation and insights to deliver improved experiences for IT staff, end users, and connected devices.Streamline IT operations, reduce mean time to repair, and deliver a new generation of wired and wireless networks; the EX4100-F provides rich streaming telemetry data for insights into switch health and wired service-level expectations (SLEs) for pre- and post-connection metrics.Scale with ease, build resiliency, and streamline management with Virtual Chassis and EVPN-VXLAN-based campus fabrics, which help to simplify configuring and maintaining multiple devices.Standards-based micro segmentation using group-based policies (GBP) leverages underlying VXLAN technology to provide agnostic endpoint access control for consistent security policies and granular control of application, business function, or user tags.Take segmentation to the next level by separating traffic within the same VLAN so IoT devices or users can traverse any port or switch within the network; maintain the same security policies without having to manually configure them each time.Enables per-flow level analytics, so you can monitor thousands of traffic flows per switch without impacting the CPU.Dimensions: 1.75"H x 10.59"W x 9.66"D.Lifetime manufacturer limited warranty

As a leading provider of network equipment for businesses, NETGEAR® understands the importance of providing a great choice of PoE port counts and power budgets that can adapt to your business' needs, whether in the hospitality, catering, education or retail domains. The GS728TXPv3 and GS752TXPv3 Gigabit Ethernet Switches with PoE+ and 4 SFP+ Ports join the NETGEAR Smart switches with Cloud family, adding full 24 and 48 port PoE+ support for organizations that deploy high-density PoE+ devices and require a powerful interconnect link between access and aggregation. Organizations who buy infrastructure for the long term and want future proofing for the unforeseeable can now select a switch with a PoE power budget of 190W over 24-port, or 380W over 48-port providing more headroom. Temperature- and load-based fan-speed control combines accurate monitoring with minimized system acoustic noise: the GS728TXPv3 supports quiet rack mounting operation with a maximum of 26.80dBA even at full PoE power with traffic on all ports and 25°C (77°F) ambient. Following the same measurements, GS752TXPv3 is rated at 36.6dBA..48-Port, Gigabit, Managed Network Switch.Number of PoE+ ports (802.3at) 48, Total PoE Power budget (Watts) 380W.176 Gb/s Switching Capacity.Switch Form Factor Rack Mountable Design.Supports Up to 256 VLANs.Cloud Management and 4 SFP+ Ports.Power Draw 436.00 W (Max), 28.00 W (Idle).Effectively increases available bandwidth on your network.Quickly and easily set up a wired network with 48 networking ports.Built-in power supply to ensure all components are being supplied with accurate voltage.Supports layer 3 switching for enhanced performance and usability.Rack-mountable form factor allows hassle-free and easy usage with increased efficiency

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x 10Gbps SFP+ ports engineered for gigabit AV over IP.8 PoE++ ports (90W/port) provide a total of 720W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 10Gbps SFP+ ports engineered for 1Gb AV over IP.40 PoE+ ports (30W/port) provide a total of 960W of power, so you can power and connect your devices with a single wire.240Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty