Managed Multi-Gigabit Ethernet Switches
5 results
The Netgear M4350-24F4V Series is a 1RU layer 3 managed switch with 24x 10GBASE-X SFP+ ports and 4x 25GBASE-X SFP28 uplinks. Equipped with one slot for modular power supply (1+1 redundancy). Supports Virtual Chassis stacking provides non-stop forwarding (NSF) and hitless failover, NETGEAR IGMP Plus, AV User Interface, and Engage Controller speed up AV installations..Layer 3 managed switch with 24 x 10GBASE-X SFP+ ports with 4 25GBASE-X SFP28 uplinks.1/10/25G Gigabit Ethernet line rate ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Flexible management via easy-to-use web browser based management.Equipped with one slot for modular power supply (one-plus-one redundancy).Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 12x 2.5Gbps Ethernet and 2x 10Gbps SFP+ ports engineered for 1Gb AV over IP.100Gbps (10/100/1000/2500Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
The HPE Aruba Networking CX 6200 switch Series delivers unparalleled visibility with built-in analytics for real-time monitoring and troubleshooting to help fix problems faster. The Aruba Network Analytics Engine (NAE) automatically interrogates and analyzes events that can impact network health. Advanced telemetry and automation provide the ability to easily identify and troubleshoot network, system, application, and security related issues easily through the use of Python agents and REST APIs..Layer 3 managed switch with 24 x Gigabit Ethernet and 4 x 1/10G SFP ports.128Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management.Power consumption: 59W.Meets or exceeds the 80plus Silver, EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 + A2:2013, EN 62368-1:2014 +A11:2017, CAN/CSA-C22.2 No. 60950-1-07, IEC 60950-1:2005, IEC 62368-1:2014 2nd Ed., and CNS-14336-1 standards.Managed switch delivers unparalleled visibility with built-in analytics for real-time monitoring and troubleshooting to help fix problems faster.Switch uses a fully distributed architecture with Aruba Gen7 ASICs that delivers very low latency, increased packet buffering, and adaptive power consumption; all switching and routing are wire-speed to meet the demands of bandwidth-intensive applications.Supports Aruba Dynamic Segmentation that automatically applies and enforces user, device, and application-aware policies on Aruba wired and wireless infrastructures.Enterprise-class connectivity with support for ACLs, robust QoS, and common protocols such as static and Access OSPF routing.Aruba Dynamic Segmentation enables enhanced security and simple access for users and IoT.Flexible, modular switch models support hot-swappable, redundant power supplies and fans for enhanced resiliency
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 16x 10Gbps SFP+ ports (first 12 ports support 1Gbps) engineered for 1Gb AV over IP.320Gbps line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
The Aruba CX 6300 Switch Series is a flexible, and intelligent family of AOS-CX stackable switches ideal for access, aggregation, and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba Network Analytics Engine, the Aruba CX 6300 extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX Mobile App verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in highspeed uplinks and supports high density IEEE 802.3bt high power PoE with HPE Smart Rate multi-gigabit Ethernet for high speed APs and IoT devices..Layer 3 managed switch with 48 x Gigabit Ethernet and 4 x SFP/SFP+/SFP28/SFP56 ports.48 PoE+ ports (30W/port) provide power to connect your devices with a single wire.496Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Compatible with SNMP v2c/v3 technologies.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management.Throughput: up to 369Mpps.Automated device profiling, role-based access control, and Layer 7 firewall features deliver enhanced visibility and performance for a better overall experience for both IT and end-users alike.Aruba Virtual Switching Framework (VSF) allows you to quickly grow your network using high performance front plane stacking.Advanced telemetry and automation provide the ability to easily identify and troubleshoot network, system, application and security related issues easily, through the use of Python agents and REST API.Power-to-port airflow construction is designed for top-of-rack (TOR) and out-of-band-management (OOBM) data center deployments
You May Also Like
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x 10Gbps SFP+ ports engineered for 1Gb AV over IP.24 PoE+ ports (30W/port) provide a total of 480W of power, so you can power and connect your devices with a single wire.132Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 10Gbps SFP+ ports engineered for 1Gb AV over IP.40 PoE+ ports (30W/port) provide a total of 960W of power, so you can power and connect your devices with a single wire.240Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 10Gbps SFP+ ports engineered for 1Gb AV over IP.40 PoE++ ports (90W/port) provide a total of 2880W of power, so you can power and connect your devices with a single wire.240Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cords, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x SFP ports engineered for 1Gb AV over IP.24 PoE+ ports (30W/port) provide a total of 300W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 1Gbps SFP ports engineered for 1Gb AV over IP.40 PoE+ ports (30W/port) provide a total of 480W of power, so you can power and connect your devices with a single wire.96Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
The Netgear M4300-48X switch delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge and SMB core deployments with unrivaled ease of use. Nonstop forwarding (NSF) virtual chassis architecture provide advanced High Availability (HA) with hitless failover across the stack. Intelligent Netgear IGMP Plus multicast allows for scalable Pro AV installations at Layer 2 without the PIM complexity. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing ā as standard. The Netgear M4300 Switch Series is perfect for wireless access, unified communications and professional AV-over-IP installations. Netgear Intelligent Edge Switch solutions combine latest advances in hardware and software engineering for higher flexibility, lower complexity and stronger investment protection, at a high-value price point..Stackable managed switch for midsize organization networks.Features 48 x 10GBASE-T (RJ-45), 4 x 10GBASE-X (SFP+) shared ports, out-of-band 1G Ethernet management port, Mini-USB and RJ45 RS232 console ports, USB storage port.960Gbps non-blocking fabric across 48 ports.Dimensions: 1.73"H x 17.32"W x13.58"D.Maximum power consumption: 237.2W.Full-width form factor with one-unit rack mount kit.Full L3 feature set and nonstop forwarding (NSF) stacking.Ships with one modular APS250W PSU in first power supply slot.Ship with a blank cover in the second power supply slot.Low acoustics (40.3dB at 77 degrees Fahrenheit).Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 8x gigabit Ethernet and 2x 10Gbps SFP+ port engineered for 1Gb AV over IP.8 PoE+ ports (30W/port) provide a total of 220W of power, so you can power and connect your devices with a single wire.56Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power adapter, power cord, console USB Type-C cable, flat brackets for desktop or wall mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x 1Gbps SFP ports engineered for 1Gb AV over IP.24 PoE++ ports (90W/port) provide a total of 1440W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cords, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x 10Gbps SFP+ ports engineered for gigabit AV over IP.8 PoE++ ports (90W/port) provide a total of 720W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x 10Gbps SFP+ ports engineered for gigabit AV over IP.8 PoE+ ports (30W/port) provide a total of 240W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
Enjoy high speed, reliability, and flexibility by expanding your business's network capacity with the M4300-8X8F 16-Port RJ45/SFP+ 10G Managed Network Switch from Netgear. Pre-configured for AV-over-IP, this fully managed switch includes Layer 2, 3, and 4 feature sets, such as hot-swappable mixed stacking, with up to eight switches in a single logical switch. However, there are no license requirements to support video broadcast and other high-bandwidth applications. The M4300-8X8F features sixteen 10G ports, comprised of eight RJ45 copper wire connectors and eight SFP+ fiber optic transceiver slots. This switch is designed to smoothly transfer data with a 320 Gb/s switching capacity and 238 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection. The half-width design allows you to install two switches into the same rackmount space for redundancy. A modular 250W power supply is included..16 Ethernet ports, is classified as a High-Performance switch, and offers Managed network management..Switch supports ultra-fast connectivity with a 10Gbps data transfer rate on each port, ensuring high-speed performance for demanding networks..Compact half-width design and 1RU rack-mountable form factor, allowing flexible installation in space-constrained environments..Full SNMP support (v1, v2c, and v3) for comprehensive network monitoring and centralized management..Equipped with advanced Quality of Service capabilities, including DiffServ, Auto-VoIP, and Auto-iSCSI prioritization, to optimize traffic for voice and storage applications..robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Delivers 320Gbps switching capacity and supports Layer 2, Layer 3, and Layer 4 operational modes, ensuring scalability and flexibility for enterprise networks..Operates with up to 250W power draw and intelligent fan control, promoting energy efficiency and reduced operational costs..IEEE 802.3 standards and OpenFlow 1.3, making it SDN-ready and suitable for modern networking environments..Authentication method: RADIUS, TACACS+.Form factor: Rack mountable
Expand your small to medium-sized business's network capacity with the M4300-24X 48-Port 10G Managed Network Switch from Netgear. This fully managed rackmount network switch includes Layer 2, 3, and 4 feature sets, such as hot-swappable mixed stacking, with up to eight switches in a single logical switch, but no license requirements to support video broadcast and other high-bandwidth applications. With 24 10G Ethernet ports, you can connect computers and other devices for high-bandwidth applications. The M4300-24X also includes four shared 10G SFP+ ports for fiber uplinks. Designed for smooth data transfers, this switch supports a 960 Gb/s non-blocking switching capacity and 714 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection. A 250W power supply is included..24 10GBASE-T Ethernet ports, Multi-Gigabit Ethernet performance class, and is a fully managed switch.Data transfer rate of up to 10 Gbps per port, delivering high-speed performance across all 24 10GBASE-T Ethernet ports.Rack mounting enables you to organize wires & secure cables for professional installation.Supports SNMP for remote network monitoring and management.Advanced QoS features prioritize traffic for optimal application performance.Provides comprehensive system management with advanced security features including ACLs, DHCP, sFlow, IPv4/IPv6 routing, and OpenFlow 1.3 support.Delivers line-rate 10G throughput across all ports with operational modes including Layer 2, Layer 3, Layer 4 switching and nonstop forwarding.Limited Lifetime Warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x gigabit SFP ports engineered for gigabit AV over IP.8 PoE+ ports (30W/port) provide a total of 125W of power, so you can power and connect your devices with a single wire.24Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
The Aruba CX 6300 Switch Series is a modern, flexible and intelligent family of stackable switches perfect for enterprise network access, aggregation, core and data center top of rack (ToR) deployments. Created for game- changing operational efficiency with built-in security and resiliency, the 6300 switches provide the foundation for high-performance networks supporting IoT, mobile and cloud applications. Built from the ground up with a combination of cutting-edge hardware, software and analytics and automation tools, the stackable 6300 switches are part of the Aruba CX switching portfolio, designed for today's enterprise campus, branch and data center networks. By combining a modern, fully programmable OS with the Aruba Network Analytics Engine, the 6300 switches provide industry leading monitoring and troubleshooting capabilities for the access layer. A powerful Aruba Gen7 ASIC architecture delivers performance and robust feature support with flexible programmability for tomorrow's applications. The Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. This flexible series has built-in wirespeed 1GbE/10GbE/25GbE uplinks and supports high density IEEE 802.3bt high power PoE. HPE Smart Rate multi-gigabit Ethernet paves the way for high speed access points and IoT devices by delivering fast connectivity and high power PoE using existing cabling. Aruba Dynamic Segmentation extends Aruba's foundational wireless role-based policy capability to Aruba wired switches. What this means is that the same security, user experience and simplified IT management can be enjoyed throughout the network. Regardless of how users and IoT devices connect, consistent policies are enforced across wired and wireless networks, keeping traffic secure and separate..Modern, flexible and intelligent AOS-CX stackable switch perfect for enterprise access, aggregation and ToR data center deployments.This model has 24 x 10/100/1000 BASE-T PoE+ ports supporting up to 30W per port and 4 x 1/10/25G SFP ports.Manage via single pane of glass with Aruba Central across wired, wireless, and WAN.Throughput: 334 Mpps maximum; switching capacity: 448Gbps.Dimensions: 1.73"H x 17.4"W x 12.9"D.Power consumption: hibernation (0 rpm fan): 12W, idle: 52W, 100% traffic rate: 67W.Powered by quad core ARM Cortex A72 1.8GHz, 8 GBytes DDR4, 32 GBytes eMMC, and 8 MB Shared Packet Buffer Memory.Lifetime manufacturer limited warranty
Netgear 300 Series Gigabit Ethernet unmanaged switches provide easy, reliable, and affordable network connectivity for home and small offices. With these unmanaged plug-and-play switches, you can expand your network connections to multiple devices instantly. Just step up to switch directly to avoid congestion due to stacking up lower port count switches and be ready for future expansion..Unmanaged switch provides easy, reliable, and affordable network connectivity for home and small offices.Contains 24 x 10/100/1000Mbps ports (auto uplink).Non-blocking switching architecture for maximum throughput at wire speed.Dimensions: 1.7"H x 9.9"W x 7.1"D.Power consumption: 12.1W max and 4.33W standby; features energy-efficient technology for power savings.Certifications and standards: Meets or exceeds CE Mark, FCC Part 15 Class A, IC Class A, RCM, VCCI, CB, CE LVD standards.Fanless design for silent operation.Desktop-, wall-, and rack-mountable (rack-mount kit included).Auto MDI/MDIX eliminates the need for crossover cables.LED indicators for ease of use.Auto negotiation for automatic connection at the highest common speed between the switch and end device.802.1p QoS for traffic/frame prioritization.Plug-and-play; no setup required.Durable and rugged metal case for added protection.Standards-based technology ensures interoperability with any standards based devices in the existing network.3-year manufacturer limited warranty
The Aruba 6300M switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba network analytics engine, the Aruba 6300M extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX mobile app verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management..Stackable switch is perfect for enterprise network access, aggregation, core and data center top-of-rack deployments.Features 24 x 1G/10G SFP+ and 4 x 1/10/25/50G SFP ports.Management security restricts access to critical configuration commands, provides multiple privilege levels with password protection, and local/remote syslog capabilities allow logging of all access.Throughput: 654Mpps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Maximum power consumption: 85W with JL085A PSU; switching capacity: 880Gbps.Certifications and standards: Meets or exceeds UL, FCC standards.Allows for stacking of up to 10 switches, providing scale and simplified management.Stackable layer 3 switch with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS.Provides NetEdit support for automation, configuration, verification, and one-touch deployment with the mobile app.Offers redundancy and PoE customization with hot-swappable power supplies and fans.Memory and processor: 1.8GHz quad-core ARM Cortex-A72; 8GB DDR4 and 32GB eMMC with 8MB shared packet buffer memory.Switch has two fan tray slots and comes with one fan tray installed.Lifetime manufacturer limited warranty