Netgear M4300
4 results
Enjoy high speed, reliability, and flexibility by expanding your business's network capacity with the M4300-8X8F 16-Port RJ45/SFP+ 10G Managed Network Switch from Netgear. Pre-configured for AV-over-IP, this fully managed switch includes Layer 2, 3, and 4 feature sets, such as hot-swappable mixed stacking, with up to eight switches in a single logical switch. However, there are no license requirements to support video broadcast and other high-bandwidth applications. The M4300-8X8F features sixteen 10G ports, comprised of eight RJ45 copper wire connectors and eight SFP+ fiber optic transceiver slots. This switch is designed to smoothly transfer data with a 320 Gb/s switching capacity and 238 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection. The half-width design allows you to install two switches into the same rackmount space for redundancy. A modular 250W power supply is included..16 Ethernet ports, is classified as a High-Performance switch, and offers Managed network management..Switch supports ultra-fast connectivity with a 10Gbps data transfer rate on each port, ensuring high-speed performance for demanding networks..Compact half-width design and 1RU rack-mountable form factor, allowing flexible installation in space-constrained environments..Full SNMP support (v1, v2c, and v3) for comprehensive network monitoring and centralized management..Equipped with advanced Quality of Service capabilities, including DiffServ, Auto-VoIP, and Auto-iSCSI prioritization, to optimize traffic for voice and storage applications..robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Delivers 320Gbps switching capacity and supports Layer 2, Layer 3, and Layer 4 operational modes, ensuring scalability and flexibility for enterprise networks..Operates with up to 250W power draw and intelligent fan control, promoting energy efficiency and reduced operational costs..IEEE 802.3 standards and OpenFlow 1.3, making it SDN-ready and suitable for modern networking environments..Authentication method: RADIUS, TACACS+.Form factor: Rack mountable
The Netgear M4300-48X switch delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge and SMB core deployments with unrivaled ease of use. Nonstop forwarding (NSF) virtual chassis architecture provide advanced High Availability (HA) with hitless failover across the stack. Intelligent Netgear IGMP Plus multicast allows for scalable Pro AV installations at Layer 2 without the PIM complexity. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing – as standard. The Netgear M4300 Switch Series is perfect for wireless access, unified communications and professional AV-over-IP installations. Netgear Intelligent Edge Switch solutions combine latest advances in hardware and software engineering for higher flexibility, lower complexity and stronger investment protection, at a high-value price point..Stackable managed switch for midsize organization networks.Features 48 x 10GBASE-T (RJ-45), 4 x 10GBASE-X (SFP+) shared ports, out-of-band 1G Ethernet management port, Mini-USB and RJ45 RS232 console ports, USB storage port.960Gbps non-blocking fabric across 48 ports.Dimensions: 1.73"H x 17.32"W x13.58"D.Maximum power consumption: 237.2W.Full-width form factor with one-unit rack mount kit.Full L3 feature set and nonstop forwarding (NSF) stacking.Ships with one modular APS250W PSU in first power supply slot.Ship with a blank cover in the second power supply slot.Low acoustics (40.3dB at 77 degrees Fahrenheit).Lifetime manufacturer limited warranty
The Netgear M4300-52G-PoE+ switch delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge and SMB core deployments with unrivaled ease of use. Nonstop forwarding (NSF) virtual chassis architecture provide advanced High Availability (HA) with hitless failover across the stack. Intelligent Netgear IGMP Plus multicast allows for scalable Pro AV installations at Layer 2 without the PIM complexity. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing – as standard. The Netgear M4300 Switch Series is perfect for wireless access, unified communications and professional AV-over-IP installations. Netgear Intelligent Edge Switch solutions combine latest advances in hardware and software engineering for higher flexibility, lower complexity and stronger investment protection, at a high-value price point..Stackable managed switch in 1U rack mount form factor for midsize organizations networks.Features 48 x 1000BASE-T (RJ-45) PoE+ ports, 2 x 10GBASE-T (RJ-45), 2 x 10GBASE-X (SFP+) independent ports, out-of-band 1G Ethernet management port, Mini-USB and RJ-45 RS232 console ports, USB storage port.176Gbps non-blocking fabric across 52 ports.Dimensions: 1.73"H x 17.32"W x15.28"D.Maximum power consumption: 888W.Full L3 feature set and nonstop forwarding (NSF) stacking.Ships with one modular APS1000W PSU in first power supply slot.Ships with a blank cover in the second power supply slot.Lifetime manufacturer limited warranty
Expand your small to medium-sized business's network capacity with the M4300-24X 48-Port 10G Managed Network Switch from Netgear. This fully managed rackmount network switch includes Layer 2, 3, and 4 feature sets, such as hot-swappable mixed stacking, with up to eight switches in a single logical switch, but no license requirements to support video broadcast and other high-bandwidth applications. With 24 10G Ethernet ports, you can connect computers and other devices for high-bandwidth applications. The M4300-24X also includes four shared 10G SFP+ ports for fiber uplinks. Designed for smooth data transfers, this switch supports a 960 Gb/s non-blocking switching capacity and 714 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection. A 250W power supply is included..24 10GBASE-T Ethernet ports, Multi-Gigabit Ethernet performance class, and is a fully managed switch.Data transfer rate of up to 10 Gbps per port, delivering high-speed performance across all 24 10GBASE-T Ethernet ports.Rack mounting enables you to organize wires & secure cables for professional installation.Supports SNMP for remote network monitoring and management.Advanced QoS features prioritize traffic for optimal application performance.Provides comprehensive system management with advanced security features including ACLs, DHCP, sFlow, IPv4/IPv6 routing, and OpenFlow 1.3 support.Delivers line-rate 10G throughput across all ports with operational modes including Layer 2, Layer 3, Layer 4 switching and nonstop forwarding.Limited Lifetime Warranty
You May Also Like
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 10Gbps SFP+ ports engineered for 1Gb AV over IP.40 PoE++ ports (90W/port) provide a total of 2880W of power, so you can power and connect your devices with a single wire.240Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cords, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 10Gbps SFP+ ports engineered for 1Gb AV over IP.40 PoE+ ports (30W/port) provide a total of 960W of power, so you can power and connect your devices with a single wire.240Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x 10Gbps SFP+ ports engineered for gigabit AV over IP.8 PoE++ ports (90W/port) provide a total of 720W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x 10Gbps SFP+ ports engineered for 1Gb AV over IP.24 PoE+ ports (30W/port) provide a total of 480W of power, so you can power and connect your devices with a single wire.132Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x 10Gbps SFP+ ports engineered for gigabit AV over IP.8 PoE+ ports (30W/port) provide a total of 240W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 1Gbps SFP ports engineered for 1Gb AV over IP.40 PoE+ ports (30W/port) provide a total of 480W of power, so you can power and connect your devices with a single wire.96Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x SFP ports engineered for 1Gb AV over IP.24 PoE+ ports (30W/port) provide a total of 300W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 8x gigabit Ethernet and 2x 10Gbps SFP+ port engineered for 1Gb AV over IP.8 PoE+ ports (30W/port) provide a total of 220W of power, so you can power and connect your devices with a single wire.56Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power adapter, power cord, console USB Type-C cable, flat brackets for desktop or wall mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x gigabit SFP ports engineered for gigabit AV over IP.8 PoE+ ports (30W/port) provide a total of 125W of power, so you can power and connect your devices with a single wire.24Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x 1Gbps SFP ports engineered for 1Gb AV over IP.24 PoE++ ports (90W/port) provide a total of 1440W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cords, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
The Netgear 16-port high-power PoE+ Gigabit Ethernet unmanaged switch joins the Netgear unmanaged switch family, adding full 16 ports support for flexible deployment of modern high-power PoE devices. Companies can now deploy denser PoE+ devices connected to a single switch instead of multiples with a total PoE power budget of 260W. The quiet design makes it perfect for any home or business environment..16-port high-power PoE+ Gigabit Ethernet unmanaged switch adds full 16 ports support for flexible deployment of modern high-power PoE devices.Contains 16 auto-sensing 10/100/1000Mbps Gigabit Ethernet ports with up to 32 non-blocking switching.Dimensions: 1.7"H x 12.99"W x 8.15"D.Energy-efficient technology for power savings.Certifications and standards: Meets or exceeds FCC 47 CFR Part15B (Class A), ICES-003 Class A, EN 5024/55032/55035 (Class A), AS/NZS CISPR 32, VCCI, BSMI CNS13438, KCC, UL standards.Auto MDI/MDIX eliminates the need for crossover cables.Small, sturdy desktop metal case and quiet operation.High-power PoE with impressive PoE budgets for all types of PoE installations.Simple setup with no software or configuration needed.Per-port LEDs for port activity and speed.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Non-blocking switching architecture for maximum throughput at wire speed.Standards-based technology ensures interoperability with any standards-based devices in the existing network.Power up to 30W per device.5-year manufacturer limited warranty
xpand your small-to-medium size business's network capacity with the M4300-52G-PoE+ 50-Port 1G/10G PoE+ Compliant Managed Network Switch from Netgear. This fully managed rackmount network switch includes Layer 2, 3, and 4 feature sets such as hot-swappable mixed stacking, with up to eight switches in a single logical switch, but no license requirements to support video broadcast and other high-bandwidth applications. With 48 PoE+ compliant Gigabit Ethernet ports and a 480W power budget, you can provide power and data to IP cameras, access points, VoIP phones, and more. This switch includes 550W power supply with support for a second PSU for redundancy and increased PoE capacity. The M4300-52G-PoE+ also includes two 10G RJ45 ports alongside two 10G SFP+ ports for high-speed uplinks. The M4300-52G-PoE+ is designed to smoothly transfer data with a 176 Gb/s switching capacity and 714 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection..48 Ethernet ports, belongs to the Compliant performance class, and is a Managed network switch..IEEE 802.3af/at PoE+ with a total power budget of up to 480W (expandable to 720W with dual PSUs)..10Gbps connectivity through two 10GBASE-T and two 10G SFP+ uplink ports..Features a 1U rack-mountable form factor for efficient integration in enterprise environments..Supports SNMP v1, v2c, and v3 for advanced network monitoring and management..Comprehensive QoS features include traffic prioritization, bandwidth control, and advanced queuing for optimized performance..Offers web-based GUI, CLI, RMON, sFlow, and robust security with ACLs, DHCP snooping, and 802.1X authentication..Provides a non-blocking switching capacity of 176Gbps with Layer 2/3/4 operational modes and IPv4/IPv6 support..Maximum power consumption is approximately 600W under full PoE load, with energy-efficient Ethernet (EEE) for reduced power usage..Complies with IEEE 802.3 standards, CE, FCC, UL, and RoHS certifications for safety and environmental compliance..Switching capacity: 176 Gbps.Has cost effective 1G access layer in campus LAN networks and high performance 10G distribution layer for midsize organizations networks.Features innovative mixed "Spine and Leaf", 1G and 10G stacking with non-stop forwarding and hitless failover redundancy.SDN-Ready OpenFlow 1.3 support for maximum investment protection.Service port is great for out-of-band Ethernet management (OOB).Weight: 14.44 lbs..Comes with lifetime warranty
The NETGEAR XS512EM Plus Switch is designed for desktop or rackmount and features 12-Ports of 100M/1G/2.5G/5G/10G Multi-Gigabit Ethernet, 2 x 10G SFP+ ports (2 are shared), ProSAFE Lifetime Protection and more..12 Multi-gig/10G Ethernet ports.2 x 1G/10G SFP+ ports (both are shared).Management software with easy-to-use GUI interface offers basic capabilities to configure, secure, and monitor your network..Supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.Reduces fan noise to protect your home office or business environment..Covered by an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..NETGEAR Plus Switch
Netgear brings even larger PoE budgets on unmanaged switches with Ultra60 PoE++ technology. 16-port switch is perfect for powerful PoE+/PoE++ installations with impressive PoE budget up to 380W, a compact size, plug-and-play installation, and reliable performance at affordable prices. This switch can support all types of PoE installation and features eight high-power Ultra60 PoE++ and eight PoE+ ports with a large budget to keep your devices always-ready..Unmanaged switch provides 16 ports with gigabit Ethernet connectivity to your devices.Eight high-power Ultra60 PoE++ and eight PoE+ ports provide a total of 380W of power.32Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the FCC 47 CFR Part15B (Class A), ICES-003 Class A, EN 55024/55032/55035 (Class A), AS/NZS CISPR 32, VCCI, BSMI CNS13438, KCC standards.Simple setup with no software or configuration needed.Per-port LEDs for port activity and speed.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Auto MDI/MDIX eliminates the need for crossover cables.Non-blocking switching architecture for maximum throughput at wire speed.Standards-based technology ensures interoperability with any standards-based devices in the existing network.802.3at Power Over Ethernet (PoE+) on all models for IP cameras, VoIP/Internet-based phones, wireless access points.Unique PoE technology automatically balances the PoE power based on the device needs, independent of PoE class detected.Enable pre-802.3bt devices using the proprietary PoE mode.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 9x gigabit Ethernet and 1x 1Gbps SFP port engineered for 1Gb AV over IP.8 PoE+ ports (30W/port) provide a total of 110W of power, so you can power and connect your devices with a single wire.20Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power adapter, power cord, console USB Type-C cable, flat brackets for desktop or wall mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
Netgear 24 PoE+ ports with 380W power budget. Unmanaged 300-Series PoE Switches are easy, reliable, and affordable network connectivity for home and small offices. Providing power and data from a single Ethernet cable..Gigabit Ethernet unmanaged switch.48 Gigabit Ethernet ports (24 ports PoE+).Unmanaged switch provides affordable network connectivity.Dimensions: 1.7"H x 17.3"W x 12.2"D.Energy-efficient Ethernet support.Metal case is durable and robust.Supports desktop and wall placement, includes wall mount kit in the box.Fanless design minimizes noise pollution, making the switch ideal for noise-sensitive environments.3-year manufacturer limited warranty