Netgear M4300
8 results
xpand your small-to-medium size business's network capacity with the M4300-52G-PoE+ 50-Port 1G/10G PoE+ Compliant Managed Network Switch from Netgear. This fully managed rackmount network switch includes Layer 2, 3, and 4 feature sets such as hot-swappable mixed stacking, with up to eight switches in a single logical switch, but no license requirements to support video broadcast and other high-bandwidth applications. With 48 PoE+ compliant Gigabit Ethernet ports and a 480W power budget, you can provide power and data to IP cameras, access points, VoIP phones, and more. This switch includes 550W power supply with support for a second PSU for redundancy and increased PoE capacity. The M4300-52G-PoE+ also includes two 10G RJ45 ports alongside two 10G SFP+ ports for high-speed uplinks. The M4300-52G-PoE+ is designed to smoothly transfer data with a 176 Gb/s switching capacity and 714 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection..48 Ethernet ports, belongs to the Compliant performance class, and is a Managed network switch..IEEE 802.3af/at PoE+ with a total power budget of up to 480W (expandable to 720W with dual PSUs)..10Gbps connectivity through two 10GBASE-T and two 10G SFP+ uplink ports..Features a 1U rack-mountable form factor for efficient integration in enterprise environments..Supports SNMP v1, v2c, and v3 for advanced network monitoring and management..Comprehensive QoS features include traffic prioritization, bandwidth control, and advanced queuing for optimized performance..Offers web-based GUI, CLI, RMON, sFlow, and robust security with ACLs, DHCP snooping, and 802.1X authentication..Provides a non-blocking switching capacity of 176Gbps with Layer 2/3/4 operational modes and IPv4/IPv6 support..Maximum power consumption is approximately 600W under full PoE load, with energy-efficient Ethernet (EEE) for reduced power usage..Complies with IEEE 802.3 standards, CE, FCC, UL, and RoHS certifications for safety and environmental compliance..Switching capacity: 176 Gbps.Has cost effective 1G access layer in campus LAN networks and high performance 10G distribution layer for midsize organizations networks.Features innovative mixed "Spine and Leaf", 1G and 10G stacking with non-stop forwarding and hitless failover redundancy.SDN-Ready OpenFlow 1.3 support for maximum investment protection.Service port is great for out-of-band Ethernet management (OOB).Weight: 14.44 lbs..Comes with lifetime warranty
The Netgear M4300-52G-PoE+ switch delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge and SMB core deployments with unrivaled ease of use. Nonstop forwarding (NSF) virtual chassis architecture provide advanced High Availability (HA) with hitless failover across the stack. Intelligent Netgear IGMP Plus multicast allows for scalable Pro AV installations at Layer 2 without the PIM complexity. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing ā as standard. The Netgear M4300 Switch Series is perfect for wireless access, unified communications and professional AV-over-IP installations. Netgear Intelligent Edge Switch solutions combine latest advances in hardware and software engineering for higher flexibility, lower complexity and stronger investment protection, at a high-value price point..Stackable managed switch in 1U rack mount form factor for midsize organizations networks.Features 48 x 1000BASE-T (RJ-45) PoE+ ports, 2 x 10GBASE-T (RJ-45), 2 x 10GBASE-X (SFP+) independent ports, out-of-band 1G Ethernet management port, Mini-USB and RJ-45 RS232 console ports, USB storage port.176Gbps non-blocking fabric across 52 ports.Dimensions: 1.73"H x 17.32"W x15.28"D.Maximum power consumption: 888W.Full L3 feature set and nonstop forwarding (NSF) stacking.Ships with one modular APS1000W PSU in first power supply slot.Ships with a blank cover in the second power supply slot.Lifetime manufacturer limited warranty
The Netgear M4300-48X switch delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge and SMB core deployments with unrivaled ease of use. Nonstop forwarding (NSF) virtual chassis architecture provide advanced High Availability (HA) with hitless failover across the stack. Intelligent Netgear IGMP Plus multicast allows for scalable Pro AV installations at Layer 2 without the PIM complexity. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing ā as standard. The Netgear M4300 Switch Series is perfect for wireless access, unified communications and professional AV-over-IP installations. Netgear Intelligent Edge Switch solutions combine latest advances in hardware and software engineering for higher flexibility, lower complexity and stronger investment protection, at a high-value price point..Stackable managed switch for midsize organization networks.Features 48 x 10GBASE-T (RJ-45), 4 x 10GBASE-X (SFP+) shared ports, out-of-band 1G Ethernet management port, Mini-USB and RJ45 RS232 console ports, USB storage port.960Gbps non-blocking fabric across 48 ports.Dimensions: 1.73"H x 17.32"W x13.58"D.Maximum power consumption: 237.2W.Full-width form factor with one-unit rack mount kit.Full L3 feature set and nonstop forwarding (NSF) stacking.Ships with one modular APS250W PSU in first power supply slot.Ship with a blank cover in the second power supply slot.Low acoustics (40.3dB at 77 degrees Fahrenheit).Lifetime manufacturer limited warranty
Expand your small to medium-sized business's network capacity with the M4300-24X 48-Port 10G Managed Network Switch from Netgear. This fully managed rackmount network switch includes Layer 2, 3, and 4 feature sets, such as hot-swappable mixed stacking, with up to eight switches in a single logical switch, but no license requirements to support video broadcast and other high-bandwidth applications. With 24 10G Ethernet ports, you can connect computers and other devices for high-bandwidth applications. The M4300-24X also includes four shared 10G SFP+ ports for fiber uplinks. Designed for smooth data transfers, this switch supports a 960 Gb/s non-blocking switching capacity and 714 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection. A 250W power supply is included..24 10GBASE-T Ethernet ports, Multi-Gigabit Ethernet performance class, and is a fully managed switch.Data transfer rate of up to 10 Gbps per port, delivering high-speed performance across all 24 10GBASE-T Ethernet ports.Rack mounting enables you to organize wires & secure cables for professional installation.Supports SNMP for remote network monitoring and management.Advanced QoS features prioritize traffic for optimal application performance.Provides comprehensive system management with advanced security features including ACLs, DHCP, sFlow, IPv4/IPv6 routing, and OpenFlow 1.3 support.Delivers line-rate 10G throughput across all ports with operational modes including Layer 2, Layer 3, Layer 4 switching and nonstop forwarding.Limited Lifetime Warranty
Netgear 10GBASE-T SFP+ transceiver delivers 10G copper connectivity with CAT6a or CAT7 cabling up to 262.5' when inserted in a switch SFP+ fiber module slot. The transceiver fits into SFP+ or SFP28 interfaces of M4250, M4300, and M4500 managed switches..10GBASE-T SFP+ transceiver delivers 10G copper connectivity with CAT-6a or CAT-7 cabling up to 262.5' when inserted in a switch's SFP+ fiber module slot.Comes in silver.Fits into SFP+ interfaces of M4250, M4300, and M4500 managed switches.5-year manufacturer limited warranty
Enjoy high speed, reliability, and flexibility by expanding your business's network capacity with the M4300-8X8F 16-Port RJ45/SFP+ 10G Managed Network Switch from Netgear. Pre-configured for AV-over-IP, this fully managed switch includes Layer 2, 3, and 4 feature sets, such as hot-swappable mixed stacking, with up to eight switches in a single logical switch. However, there are no license requirements to support video broadcast and other high-bandwidth applications. The M4300-8X8F features sixteen 10G ports, comprised of eight RJ45 copper wire connectors and eight SFP+ fiber optic transceiver slots. This switch is designed to smoothly transfer data with a 320 Gb/s switching capacity and 238 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection. The half-width design allows you to install two switches into the same rackmount space for redundancy. A modular 250W power supply is included..16 Ethernet ports, is classified as a High-Performance switch, and offers Managed network management..Switch supports ultra-fast connectivity with a 10Gbps data transfer rate on each port, ensuring high-speed performance for demanding networks..Compact half-width design and 1RU rack-mountable form factor, allowing flexible installation in space-constrained environments..Full SNMP support (v1, v2c, and v3) for comprehensive network monitoring and centralized management..Equipped with advanced Quality of Service capabilities, including DiffServ, Auto-VoIP, and Auto-iSCSI prioritization, to optimize traffic for voice and storage applications..robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Delivers 320Gbps switching capacity and supports Layer 2, Layer 3, and Layer 4 operational modes, ensuring scalability and flexibility for enterprise networks..Operates with up to 250W power draw and intelligent fan control, promoting energy efficiency and reduced operational costs..IEEE 802.3 standards and OpenFlow 1.3, making it SDN-ready and suitable for modern networking environments..Authentication method: RADIUS, TACACS+.Form factor: Rack mountable
Enable reliable fiber optic connections with this Netgear ProSafe AXM761 10GBASE-SR SFP+ Transceiver. This versatile short reach SFP optical transceiver is designed to deliver up to 10 Gb/s transfer speeds using multi-mode fiber cables with LC duplex connectors..Multimode fiber with an LC connector type for short-range 10 Gigabit Ethernet connectivity..Network Transceiver Type is SFP+, and it is used for providing short-range 10 Gigabit Ethernet connectivity over multimode fiber..Module supports a data transfer rate of 10 Gbps (10,000 Mbps) for high-speed connectivity..Provides connectivity up to 300 meters on OM3 fiber and up to 400ā550 meters on OM4 fiber..Gigabit Ethernet SFP+ transceiver designed for 10 Gigabit Ethernet networks..Transceiver consumes less than 1 Watt of power, ensuring energy efficiency..Hot-swappable, allowing installation or removal without powering down the device..Module is MSA compliant, ensuring interoperability across multiple vendors..MTBF of over 1,000,000 hours, indicating high reliability and durability..Operates at a wavelength of 850 nm, suitable for short-range multimode fiber links..Product is sold as 1 unit (Each)..Data link protocol: 10 gigabit-ethernet.Adds 10 gigabit-ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfaces.Fits into the two built-in 10 GE SFP+ interfaces of GSM72xxPS / GSM73xxS.Fits into the 10 GE SFP+ interface of SFP+ Adapter module AX743.Certifications and standards: RoHS, UL 1950 CSA 22.2 No. 950.Netgear ProSafe SFP+ Transceiver fits into standard 10GB SFP+ interfaces and provides hot-swappable installation or removal.
10GBASE-SR is a port type for MMF (multimode fiber) and uses 850 nm lasers. For longer reach, another standard defined in IEEE 802.3ae is 10GBASE-LR. 10GBASE-LR is a port type for SMF (single mode fiber) and uses 1310 nm lasers. Traditionally SMF 10GBASE-LR SFP+ modules are way more expensive than MMF 10GBASE-LR SFP+ modules. MMF and SMF historical short range / long range paradigm may change in short term: since 2014, for new installations, especially indoor, SMF wiring is about half of MMF wiring. As a consequence, lots of new buildings and datacenters now standardize on SMF. But 10GBASE-LR SFP+ transceivers are too expensive for short-range connections. A new market for short distances over SMF has been created: the industry is standardizing on a new class of SMF 10G transmitters with typical 10GBASE-LR LITE SFP+ transceivers. While not a standard yet, 10GBASE-LR LITE has a specified reach of 2 km over standard 9Āµm single mode fiber. 10GBASE-LR LITE isnāt a replacement for 10GBASE-LR optics: it is just relevant alternative for āshorterā reach SMF applications..Utilizes LC duplex connectors with single-mode fiber (SMF) for high-speed data transmission.10GBASE-LR Lite SFP+ transceiver for 10GbE over single-mode fiber.Data transfer rate of 10 Gigabits per second (10Gbps), equivalent to 10,000 Megabits per second (Mbps).Supports maximum transmission distance of up to 2,000 meters over single-mode fiber.10 Gigabit Ethernet connectivity for high-speed network performance.Hot-swappable, allowing installation or removal without powering down the system.MSA compliant, ensuring interoperability with other MSA-compliant networking equipment.Operates at a wavelength of 1310 nanometers (nm)
You May Also Like
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x 10Gbps SFP+ ports engineered for gigabit AV over IP.8 PoE++ ports (90W/port) provide a total of 720W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 10Gbps SFP+ ports engineered for 1Gb AV over IP.40 PoE++ ports (90W/port) provide a total of 2880W of power, so you can power and connect your devices with a single wire.240Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cords, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x 10Gbps SFP+ ports engineered for gigabit AV over IP.8 PoE+ ports (30W/port) provide a total of 240W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
The Netgear M4350-24F4V Series is a 1RU layer 3 managed switch with 24x 10GBASE-X SFP+ ports and 4x 25GBASE-X SFP28 uplinks. Equipped with one slot for modular power supply (1+1 redundancy). Supports Virtual Chassis stacking provides non-stop forwarding (NSF) and hitless failover, NETGEAR IGMP Plus, AV User Interface, and Engage Controller speed up AV installations..Layer 3 managed switch with 24 x 10GBASE-X SFP+ ports with 4 25GBASE-X SFP28 uplinks.1/10/25G Gigabit Ethernet line rate ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Flexible management via easy-to-use web browser based management.Equipped with one slot for modular power supply (one-plus-one redundancy).Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 10Gbps SFP+ ports engineered for 1Gb AV over IP.40 PoE+ ports (30W/port) provide a total of 960W of power, so you can power and connect your devices with a single wire.240Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
The Netgear 16-port high-power PoE+ Gigabit Ethernet unmanaged switch joins the Netgear unmanaged switch family, adding full 16 ports support for flexible deployment of modern high-power PoE devices. Companies can now deploy denser PoE+ devices connected to a single switch instead of multiples with a total PoE power budget of 260W. The quiet design makes it perfect for any home or business environment..16-port high-power PoE+ Gigabit Ethernet unmanaged switch adds full 16 ports support for flexible deployment of modern high-power PoE devices.Contains 16 auto-sensing 10/100/1000Mbps Gigabit Ethernet ports with up to 32 non-blocking switching.Dimensions: 1.7"H x 12.99"W x 8.15"D.Energy-efficient technology for power savings.Certifications and standards: Meets or exceeds FCC 47 CFR Part15B (Class A), ICES-003 Class A, EN 5024/55032/55035 (Class A), AS/NZS CISPR 32, VCCI, BSMI CNS13438, KCC, UL standards.Auto MDI/MDIX eliminates the need for crossover cables.Small, sturdy desktop metal case and quiet operation.High-power PoE with impressive PoE budgets for all types of PoE installations.Simple setup with no software or configuration needed.Per-port LEDs for port activity and speed.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Non-blocking switching architecture for maximum throughput at wire speed.Standards-based technology ensures interoperability with any standards-based devices in the existing network.Power up to 30W per device.5-year manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x 10Gbps SFP+ ports engineered for 1Gb AV over IP.24 PoE+ ports (30W/port) provide a total of 480W of power, so you can power and connect your devices with a single wire.132Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 40x gigabit Ethernet and 8x 1Gbps SFP ports engineered for 1Gb AV over IP.40 PoE+ ports (30W/port) provide a total of 480W of power, so you can power and connect your devices with a single wire.96Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 8x gigabit Ethernet and 2x 10Gbps SFP+ port engineered for 1Gb AV over IP.8 PoE+ ports (30W/port) provide a total of 220W of power, so you can power and connect your devices with a single wire.56Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power adapter, power cord, console USB Type-C cable, flat brackets for desktop or wall mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x SFP ports engineered for 1Gb AV over IP.24 PoE+ ports (30W/port) provide a total of 300W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x gigabit SFP ports engineered for gigabit AV over IP.8 PoE+ ports (30W/port) provide a total of 125W of power, so you can power and connect your devices with a single wire.24Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
Netgear 300 Series Gigabit Ethernet unmanaged switches provide easy, reliable, and affordable network connectivity for home and small offices. With these unmanaged plug-and-play switches, you can expand your network connections to multiple devices instantly. Just step up to switch directly to avoid congestion due to stacking up lower port count switches and be ready for future expansion..Unmanaged switch provides easy, reliable, and affordable network connectivity for home and small offices.Contains 24 x 10/100/1000Mbps ports (auto uplink).Non-blocking switching architecture for maximum throughput at wire speed.Dimensions: 1.7"H x 9.9"W x 7.1"D.Power consumption: 12.1W max and 4.33W standby; features energy-efficient technology for power savings.Certifications and standards: Meets or exceeds CE Mark, FCC Part 15 Class A, IC Class A, RCM, VCCI, CB, CE LVD standards.Fanless design for silent operation.Desktop-, wall-, and rack-mountable (rack-mount kit included).Auto MDI/MDIX eliminates the need for crossover cables.LED indicators for ease of use.Auto negotiation for automatic connection at the highest common speed between the switch and end device.802.1p QoS for traffic/frame prioritization.Plug-and-play; no setup required.Durable and rugged metal case for added protection.Standards-based technology ensures interoperability with any standards based devices in the existing network.3-year manufacturer limited warranty
Netgear 300 Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Managed switch delivers essential business networking features and powers PoE+ devices such as VoIP phones, IP cameras, and more.Contains 16 x 10/100/1000 RJ45 copper ports (auto uplink).Business-friendly and easy-to-use web browser-based management GUI.Dimensions: 1.06"H x 11.26"W x 4.02"D.Certifications and standards: Meets or exceeds CE mark, FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Fanless design for silent operation makes this switch perfect for noise-sensitive environments.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.16 ports provide up to 1000Mbps of dedicated, non-blocking bandwidth each.10Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.15 PoE+ ports provide a total of 231W of power so you can power and connect your devices with a single wire.Manage PoE prioritization, PoE power limit per port, PoE scheduling, and more for simple control over all PoE-powered devices.Simple, yet useful network set-up on top of plug-and-play connectivity.Quality of Service (QoS) for traffic prioritization.Port mirroring for network monitoring.Rate limiting for better bandwidth allocation.Features auto "denial-of-service" (DoS) prevention, troubleshoot connection issues via cable test, loop prevention, loop detection, broadcast storm controls.5-year manufacturer limited warranty
Netgear 300 Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Managed switch delivers essential business networking features and powers PoE+ devices such as VoIP phones, IP cameras, and more.Contains 16 x 10/100/1000 RJ45 copper ports (auto uplink).Business-friendly and easy-to-use web browser-based management GUI.Dimensions: 1.06"H x 11.26"W x 4.02"D.Certifications and standards: Meets or exceeds CE mark, FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Fanless design for silent operation makes this switch perfect for noise-sensitive environments.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.16 ports provide up to 1000Mbps of dedicated, non-blocking bandwidth each.10Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.15 PoE+ ports provide a total of 180W of power so you can power and connect your devices with a single wire.Manage PoE prioritization, PoE power limit per port, PoE scheduling, and more for simple control over all PoE-powered devices.Simple, yet useful network set-up on top of plug-and-play connectivity.Quality of Service (QoS) for traffic prioritization.Port mirroring for network monitoring.Rate limiting for better bandwidth allocation.Features auto "denial-of-service" (DoS) prevention, troubleshoot connection issues via cable test, loop prevention, loop detection, broadcast storm controls.5-year manufacturer limited warranty
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x 1Gbps SFP ports engineered for 1Gb AV over IP.24 PoE++ ports (90W/port) provide a total of 1440W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cords, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty
Netgear brings even larger PoE budgets on unmanaged switches with Ultra60 PoE++ technology. 16-port switch is perfect for powerful PoE+/PoE++ installations with impressive PoE budget up to 380W, a compact size, plug-and-play installation, and reliable performance at affordable prices. This switch can support all types of PoE installation and features eight high-power Ultra60 PoE++ and eight PoE+ ports with a large budget to keep your devices always-ready..Unmanaged switch provides 16 ports with gigabit Ethernet connectivity to your devices.Eight high-power Ultra60 PoE++ and eight PoE+ ports provide a total of 380W of power.32Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the FCC 47 CFR Part15B (Class A), ICES-003 Class A, EN 55024/55032/55035 (Class A), AS/NZS CISPR 32, VCCI, BSMI CNS13438, KCC standards.Simple setup with no software or configuration needed.Per-port LEDs for port activity and speed.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Auto MDI/MDIX eliminates the need for crossover cables.Non-blocking switching architecture for maximum throughput at wire speed.Standards-based technology ensures interoperability with any standards-based devices in the existing network.802.3at Power Over Ethernet (PoE+) on all models for IP cameras, VoIP/Internet-based phones, wireless access points.Unique PoE technology automatically balances the PoE power based on the device needs, independent of PoE class detected.Enable pre-802.3bt devices using the proprietary PoE mode.Lifetime manufacturer limited warranty