Network Cable Toolkits

Fluke Networks Contractor telecom kit features punch down tool for reliable terminations. Contractor telecom kit offers a cable stripper that quickly rings and slits many types of cable..D814 industry standard punch down tool for reliable terminations.Eversharp 66/110 cut blade provides flexibility for different block and jack terminations.Cable stripper quickly rings and slits many types of cable.Cut and strip wire cleaner and faster with the electricians D-snips.Connect to jacks for testing with the standard 4-wire modular adapter.Soft zippered pouch keeps your tools all in one convenient place.Includes a TS 30 test set with angled bed-of-nails cord, D814 impact tool, eversharp 66/110 cut blade, electrician's D-snips, cable stripper, standard 4-wire modular adapter and probe pic.Fluke Networks Contractor telecom kit is made for technicians who install, test and troubleshoot phones and has high impedance datasafe operation.

The D914S impact tool provide quality terminations on the first punch, helping to achieve the highest quality possible on network installations. The only impact tool that combine torque and impact in one tool..D914S Impact Tool w/Eversharp 66/110 Cut Blade.Special ergonomic design for better grip and to reduce hand fatigue.Automatic spring handle: choose low impact for 24/26 gauge wire or high-impact for 22 gauge wire.Use the spudger to remove the cross-connect module from the mounting brack.Application/usage: Cable termination.Accept Phillips-head or flat screwdriver blade.Includes D914S 10061810 impact tool, EverSharp 110 blade, EverSharp 66 blade.Included accessories: D914S 10061810 impact tool, Eversharp 110 blade, eversharp 66 blade.Fluke Networks D914S Impact Tool - User-Friendly Network-Installation Tool

Make effortless, uniform connections with Fluke Network''s D814, all-in-one, telecom punchdown tool. Its adjustable impact wheel has high and low settings for any type of termination..66 blades.Lightweight and easy to use.Allows low impact for 24 and 26 gauge wire or high impact for 22 gauge wire.Automatic spring mechanism provides right impact to seat and/or terminate wires.Compartment at the end of the tool stores an extra blade.Includes: D814 10055200 impact tool, eversharp 110 blade.Application/usage: Punching, cable termination.Warranty: Lifetime.Fluke Networks Impact Tool - Seats and Terminates Wires

Make effortless, uniform connections with fluke network's D814, all-in-one, telecom punchdown tool, its adjustable impact wheel has high and low settings for any type of termination..Convenient blade storage built into the end of the handle.Accepts standard industry blades.Lightweight and easy to use.Adjustable spring impact mechanism allows low impact for 24 - and 26 gauge wire or high impact for 22 gauge wire.Easy blade insertion.Includes: D814 series automatic impact tool, EeverSharp 110 blade, Eversharp 66 blade, free blade 934.D814 series automatic impact tool has adjustable spring impact mechanism allows low impact for 24- and 26-gauge wire or high impact for 22-gauge wire.

Fluke Networks® MS2-KIT MicroScanner2 Professional kit includes MicroScanner2 cable verifier with main wiremap adapter, remote identifiers #2-7 and IntelliTone Pro 200 probe. Comprises of shielded twisted-pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter and F Coax push on patch cord for effective detection. Comes with accessory soft pouch for user convenience. Features two AA alkaline batteries and a 9 V alkaline battery for long working of the verifier. Kit has MicroScanner2 getting started guide, MicroScanner2 owners CD, IntelliTone Pro getting started guide and IntelliTone Pro owners CD for trouble-free usage of the device. All the components come in a deluxe Fluke Networks carry case for added convenience..MicroScanner2 professional kit is suitable to verify voice/data/video cable and services.Measures 6.4"H x 3"W x 1.4"D.Supports copper media for high speed transmission.F connector, RJ-11, RJ-45 interfaces/ports for flexible connectivity.FTP, SSTP, UTP cables for long distance transmission.Distance to fault, Length, PoE, speed test copper cables to 1000Base-T, Wiremap tests, tools and measurements.Requires operating temperature of 32 - 123 deg F, storage temperature of -4 - 140 deg F and 90 percentage relative humidity.Operates at altitude 4000 m (operating) and 12000 m (storage).Monochrome, backlight LCD display provides brighter images.Locates virtually any cable or wire pair with IntelliTone digital and analog toning.Rubber over mold enhances grip and increases ruggedness.Contains accessory soft pouch, 2 x AA alkaline batteries, 1 x 9 V alkaline battery, MicroScanner2 getting started guide, owners CD.Contains cable verifier with main wiremap adapter, remote identifiers, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord.Meets N10140 C-Tick EMC standard, FCC Part 15 Class A, CE European Union Directives.Weighs 0.8 lbs.Comes with 1 year warranty.Fluke Networks® MicroScanner2 Professional kit tests voice/data/video cable/services with the help of a revolutionary user interface. Includes essential verification components.

Crimps 8-position RJ45 connectors and 4- and 6- position RJ11 and RJ12 connectors..Embedded flat cable cutter and stripper.Application: Stripping, cutting, crimping.Lifetime limited warranty

FTK2000 Network Accessory Kit.Networking Accessory.Part Number: FTK2000.Rigid hard shell is coated with scratch resistant finish for high quality durability

Material: Rubber handle.Industry standard, internationally accepted.Hook and spudger tools are built into the handle.Automatic spring handle - choose low impact for 24/26 gauge wire or high impact for 22-gauge wire.D914 and D914S impact tools accept phillips-head or flat screwdriver blade.Convenient blade storage built into the handle.Adapter blade allows technician to use a variety of torque tool bits and sockets.Easy blade insertion, locks in place.Application: Punching, Cable termination.Package Contents: D914 Impact tool, eversharp 110 blade, eversharp 66 blade, blade.Eversharp 110 blade, eversharp 66 blade.1 year limited warranty

The Fluke Networks® 11294000 Need-L-Lock crimping pliers combine UR UY UG connector crimper with needle-nose pliers so you can carry one less tool on your belt. Aligned crimping jaws come down square to ensure a solid connection and they are grooved to provide a better grip on wires and feature a built-in cutter and cable stripper. The 6 1/2" needle-nose crimping pliers are forged from high-quality steel with rubber-coated ergonomic handles for a reliable, non-slip grip..Combines a UR/UY/UG connector crimper with needle-nose pliers.Aligned crimping jaws come down square to ensure a solid connection.Jaws are grooved to provide a better grip on wires.Built-in cutter and wire stripper.Rubber coated handles for a non-slip grip.Needle-nose crimping pliers.UR/UY/UG connector crimper.Crimping pliers With jaws are grooved to provide a better grip on wires and feature a built-in cutter and cable stripper.

Fluke Networks® Compact Probe Pic with Cap, Yellow (44600000).Probe pic is perfect to check loose or damaged connections or to spread apart wires for direct access.Comes in yellow color and features high quality nylon construction for durability.Perfect for using the pic end for tracing or pulling wires from a bunch.Insulated tip protects against shorting adjacent components

The Fluke Network 10061120 D914S impact tool has EverSharp 110 & EverSharp 66 blade for precise cutting. It features automatic spring handle that confirms low impact for 24/26 ga wire or high impact for 22-gauge wire. It has convenient blade storage that built for easy carry. With a rubber handle and special ergonomic design, this impact tool ensures better grip and minimized hand fatigue..Industry standard, internationally accepted.Hook and spudger tools are built into the handle.Automatic spring handle --choose low impact for 24/26 ga wire or high impact for 22-gauge wire.D914 and D914S impact tools accept Phillips-head or flat screwdriver blade.Convenient blade storage built into the handle.Adapter blade allows technician to use a variety of torque tool bits and sockets.Easy blade insertion, locks in place.D914STM soft touch impact tool features a rubber handle and special ergonomic design for better grip and to reduce hand fatigue.Copper type: punchdown/impact.Type : copper.Accepts all fluke networks industry standard blades. Punch down tool measures 1.4" x 5.9" x 1".Fluke networks D914s impact tool 110 eversharp 66 blade.Impact tool with EverSharp 110 and EverSharp 66 blade, accept Phillips-head or flat screwdriver blade.

The Fluke Networks network testing device will allow you to keep your network running smoothly. It will allow you to easily test twisted-pair cables and trace installed hidden cables. It uses an easy-to-read LED interface and a two-tone generator to let you know whether it detects any problems or defects..Display type: LED.Interfaces/Ports: 1 x RJ-45.Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs.Easy-to-read fault display.Tone generator for tracing installed cables hidden in walls, floors and ceilings.Remote unit enables one-person testing of installed cables.Micromapper's built-in tone generator works with the IntelliTone™ pro probe or any other analog probe, allowing you to trace cable through walls, floors and ceilings.Micromapper also includes a remote unit that allows one person to test installed cabling or patch cords.MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs.Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults in your cable.Generation of two tones for tracing cables and lication hidden cables.Includes: Micromapper and Micromapper remote, patch cable, 6 V alkaline battery and user guide.Weight: 0.28 lbs..Dimensions: 4.93"(H) x 2.05"(W) x 1.18"(D).1 year limited warranty.Fluke Networks Network Testing Device - Powerful and Reliable

Round cable stripper for a variety of flexible round cable..Full line of cable strippers.Double-slotted stripper for 22/24 gauge wire insulation.Coax strippers with two or three levels.Combo stripper for multiple wire types and applications.Application: Stripping, cutting.Includes: Double slotted, plenum, round, coax and combo.18 months limited warranty

Signal interference from sources in the environment can make tracing cable a frustrating process. The Fluke Networks Pro3000 filtered probe blocks interference and "stops the buzz" by obstructing these signals allowing you to hear the tone you are tracing loud and clear. Probe's ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood, or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. Line cord features angled bed-of-nails clips and a rugged RJ11 plug for direct access to phone and data jacks without adapters. External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs. Use the SmartTone capability of the Pro3000 analog tone generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification up to 10 miles away..Filtered probe and tone generator kit for easy cable tracing.Probe dimensions: 1.6"H x 9.8"W x 1.3"D; tone generator dimensions: 1.4"H x 2.7"W x 2.4"D.Filtered probe comes in yellow and features a black replaceable tip; tone generator comes in blue.Innovative filtered probe obstructs signal of 60Hz and its harmonic frequencies.SmartTone technology provides five distinct tones for precise pair identification.Sends loud tone up to 10 miles on most cables.Slide switch selects continuity or tone mode.Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures.External switch allows for selection of solid or alternating tone options, indicated with solid or flashing LEDs.Supports headset via 3.5mm audio port for use in noisy environments.Angled bed-of-nails clips allow for easy access to individual pairs.RJ11 connector is perfect for use on telephone jacks.Supports switching between filtered and unfiltered modes with one button press.Utilizes an auto-off feature that deactivates the probe after five minutes to conserve battery life.Includes one spare tip.Frequency modes: 1000Hz nominal solid frequency and 1000/1500Hz nominal alternating frequency.Overvoltage protection: 60VDC in tone/polarity mode.Output power in tone mode: 8dBm into 600 ohms.Output voltage level in continuity mode: 8VDC with fresh battery.Both probe and tone generator require a 9V alkaline battery

Fluke Networks? Pro3000™ Analog probe is easy-to-use with adjustable volume control dial and "quick-twist" tip for easy replacement. Probe features recessed on/off button that helps prevent accidental turn on when placed in the pouch..Interfaces/ports: RJ-45.Tone and trace wire on non-active networks.SmartToneTM technology provides five distinct tones for exact pair identification.Sends loud tone up to 10 miles (16 kilometers) on most cables.Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures.Angled bed-of-nails clips allow easy access to individual pairs.RJ-11 connector is ideal for use on telephone jacks.Attach nylon pouch (included in kit) to your belt for easy transport.Battery: 9 V alkaline.Case dimensions: 2.7" x 2.4" x 1.4".Analog prob user interface: On/off pushbutton, volume dial, Replaceable tip, 3.5mm earphone jack.Solid Frequency: 1000 Hz nominal, alternating frequency: 1000/1500 Hz nominal, over voltage protection: 60 VDC in toner/polarity node.Output power in tone mode: 8 dB min to 600 Ohms.Output voltage level in continuity mode: 8 VDC with fresh battery.Fluke Networks® Pro3000™ Analog probe features a loud large speaker that amplifies the tone through walls, enclosure, wood or plaster and uses alkaline battery.

Analog tone and probe is the best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone technology..Interfaces/ports: Tone mode, 1 x RJ 11.Material: Copper.Storage temperature: 40 - 158 deg F.Humidity range operating: 5 - 95% (non condensing).Connectors: BNC, RJ 11.Output voltage level in continuity mode: 8 Vdc with fresh battery, over voltage protection: 60 VDC in toner/polarity mode.Frequency: 1000/1500 Hz nominal, battery: 9 V alkaline.On/off push button.Loud large speaker amplifies tone through walls, enclosure, wood or plaster.Tests, tools and measurements: Toning.Quick twist tip for easy replacement, easy to use adjustable volume control dial.Includes: analog toner, probe.Application/usage: Cable testing.SmartTone provides five distinct tones for exact pair identification.Loud tones can be send up to 10 miles (16 kilometers) on most cables, this tone change you hear through the probe positively verifies the correct wire pair.Warranty: 18 months limited.Fluke Networks Pro3000 Series Analog Tone and Probe Kit - Identify Inactive Lines Fast