Network Cable Toolkits

Overview Introducing the new LinkRunner 10G, the most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. This next-generation Android-based tester delivers complete network validation and troubleshooting, from the media (copper/fiber) to the application (layers 1 - 7), accelerating deployments, speeding problem identification, and improving the efficiency and effectiveness of network installers and operations teams..Used for validating Ethernet cabling, Multi-Gig/10G connectivity, PoE delivery, and fiber network performance..Package Contents: LinkRunner LR10G-100 tester, AllyCare Support (1 year), power adapter, holster, two SFP+ modules (10G850 & 10G1310), RJ-45 inline coupler, WireView 1–6 identifiers, quick start guide, and medium soft case..Battery powered for portable, all-day network testing in the field..Equipped with RJ-45 ports for LAN and cable testing, SFP+ slot for fiber diagnostics, USB-A and USB-C ports for data and power, microSD slot for storage expansion, 3.5mm audio jack for audio output, and POGO pin connector for docking accessories..Designed to operate reliably between 32°F and 122°F in typical field environments.

The Fluke LinkIQ cable+network tester is the solution to verify cable performance up to 10G and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements. LinkIQ also performs ping tests to verify connectivity and provides nearest switch diagnostics including advertised data rate, switch name, IP address, port number and VLAN information, plus PoE testing and load test up to Class 8 (90 W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Additional features include: Cable Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare PC. Includes LinkIQ main unit, remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone(TM) Pro 200 Probe, and duffel bag carrying case..This cable and network tester is the solution to verify cable performance up to 10G and solve network connectivity problems.Includes Remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone Pro 200 Probe, and duffel bag carrying case.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate cable performance up to 10GBASE-T via frequency-based measurements.Get connected switch data rate, switch name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC

Prepare cables with precision using the StarTech Professional Cable Stripper and Cutter. Designed for UTP, FTP, STP, coaxial, and multi-conductor cables, this compact tool features a 360° rotary stripping mechanism for clean jacket removal and an integrated cutter for fray-free trimming. Compatible with round and flat cables from 3.5mm to 7.5mm in diameter, it includes adjustable clamping depth to protect internal conductors. Lightweight and easy to use, it’s ideal for network, audio, and coaxial installations. Whether you're a technician or DIY enthusiast, this tool streamlines cable prep with reliable performance and portable convenience..Designed as a cable cutter for stripping UTP, FTP, STP, coaxial, and audio cables..Pack contains a cable stripper and cutter tool along with a quick-start guide..Operates manually, requiring no batteries or external power source..Functions reliably in temperatures ranging from 32°F to 122°F..Meets quality standards for professional-grade cable preparation tools.

FTK2000 Network Accessory Kit.Networking Accessory.Part Number: FTK2000.Rigid hard shell is coated with scratch resistant finish for high quality durability

The 4XEM™ 4XRJ4511CRIMPER cable crimping tool crimps Cat5 RJ45 as well as RJ11 and RJ12 connectors. This also works as a cable cutter and jacket stripper. It is essential for making superior unshielded Cat5 and Cat6 patch cables..Network cable crimping tool is perfect for cutting and crimping durable Cat3, Cat5 and Cat6.Dimensions: 4.2"H x 10.5"W x 1.2"D.For RJ45, RJ11 and RJ12 modular jacks.Modular plug termination tool cuts and crimps CAT5 RJ45 as well as RJ11 and RJ12 connectors.It also works as a cable cutter and jacket stripper, quality build.Essential for making superior unshielded CAT5 and CAT6 patch cables.Weight: 11.2 oz..Comes with 1 year limited warranty

The DSX CableAnalyzer Series copper cable certifiers enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you'll be. Unfortunately, there are a lot of things that slow the process down – setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand..Cable analyzer enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system.Cable analyzer dimensions: 11"H x 5.25"W x 2.63"D.Made of high-impact plastic with shock-absorbing overmold, comes in yellow.Kit includes: versiv mainframe & remote, two DSX-5000 CableAnalyzer modules, set of Cat 6A/Class EA permanent link adapters, set of Cat 6A/Class EA channel adapters, two headsets, two handstrap, two shoulder straps, carry case, USB interface cable, versiv open source software CD, two AC chargers, two universal couplers, integrated Wi-Fi, Statement of calibration and getting started guide.Works on 1000MHz maximum frequency.Standard link interface adapters: shielded RJ45, Tera, GG45.Supported test parameters: wire map, length, propagation delay, delay skew, dc loop resistance, pair-to-pair resistance unbalance, pair resistance unbalance, insertion loss, return loss, common mode return loss, near end crosstalk, far end crosstalk, attenuation-to-crosstalk ratio, acr-f, power sum acr-f/next/acr-n/alien next/alien attenuation next ratio far end, common mode to differential mode next,transverse conversion loss, equal level transverse conversion transfer loss.5.7" LCD with a projected-capacitance touch screen allows for quick tester setup with easily selectable cable types, standards, and testing parameters.Versiv enables users to accomplish more than ever before with a cable tester, by accelerating every step of the testing process.LinkWare Live cloud service lets the project manager remotely set up the testers and monitor job progress and even location from any smart device.ProjX management system eases tasks from initial setup of a job to system acceptance, it eliminates redundant steps and ensures that all tests are completed correctly the first time, and every time.Adaptive user interface puts advanced data analysis and easy setup and operation at the fingertips of technicians of all skill levels.LinkWare PC management software provides unmatched analysis of test results and professional test reports.The DSX reduces the time required to fix cabling faults with dedicated diagnostics, a simple test that locates the problem.Integrated Wi-Fi allows you to easily upload results to LinkWare Live.Meets or exceeds ANSI/TIA-568.2-D, ISO/IEC standards

Monoprice® Stripping/crimping tool kit comes with 10 RJ11/RJ45 plugs that gives better data transmitting and higher signal strength. Tool kit comes with everything you need to make and test cables..Stripping/Cutting tool designed for use with RJ-45 Cat5 UTP and STP cables.Handy Crimper/Cutter/Stripper tool kit for making RJ11/12/45 connections.Crimper is designed to crimp RJ11/12 and RJ45 connectors.Includes ten RJ11 plugs and ten RJ45 plugs.Monoprice® Stripping/crimping tool kit is designed for RJ11/12 as well as RJ45 connectors and is ideal for Cat5 UTP/STP cables.

HV Tools Crimping Network Tools for RJ45,8P8C are perfect for all your network hardware repair needs. It has high carbon steel edges..Crimping Network Tools for RJ45,8P8C.1 x 4 x 11.perfect for all your network hardware repair needs

The Fluke LinkIQ is capable of measuring lengths up to 1000' and provides distance to faults such as opens, shorts, and unterminated cable. The included MS-IE remote adapter identifies miswires and split pairs on RJ45, M12X, M12D, and M8D terminated cables. The LinkIQ qualifies cabling performance from 10 Mb/s to 10 Gb/s for EtherNet/IP, PROFINET, EtherCAT and other Industrial Ethernet protocols, performs ping tests to verify connectivity and also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE and load testing up to Class 8 (90W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Includes LinkIQ main unit, Remote ID #1-7, IntelliTone Pro 200 Probe, RJ45-RJ45 patch cord (M-F), RJ45-RJ45 patch cord (M-F), Quick Reference Guide, AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter, hanging strap with remote ID holder, and duffle bag carry case..This cable and network tester is capable of measuring lengths up to 1000' and providing distance to fault analysis (opens, shorts, and unterminated cable).Includes remote ID, RJ45-RJ45 patch cord, RJ45-RJ45 patch cord (M-F), AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate EtherNet/IP, PROFINET, EtherCAT cable performance up to 10GBASE-T.Get connected switch data rate, name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC

JackRapid is a patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle..Fast answers: JackRapid allows you to terminate jacks eight times faster than traditional impact tools with accuracy that's unmatched.Patented jack termination tool seats and terminates all wires simultaneously.Built in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.Simple, one handed operation, with an ergonomically designed handle, reduces hand fatigue.Additional information: Leviton jack: Supports jack models: 41106, 41108 Cat3/5, 5G108 Cat5e.Simple, one handed operation reduces hand fatigue.Unique design easily acco mmodates close to wall installation.Application/usage: Cable termination, cutting.Compatibility: PC.Replaceable blade head for use with multiple jack types.Fluke Networks JR-LEV-1 JackRapid Termination Tool - Quick Seating and Cutting

The most essential tools for electrical and telecom technicians in our sleek form-fitting PVC dur-a-grip tool pouch - holds your tools securely inside, even upside down..All the tools you need (in one pouch) to cut, strip, clean and make connections.Application/usage: Six tool kits combinations available for a multitude of applications.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.D914 and D814 industry standard punchdown tools make for solid terminations.All kits include ergonomically designed Dur a Grip pouch for convenient tool storage on belt.Cut and strip wire cleaner and faster with the electricians D snips.Includes: D814 impact tool, electricians D Snips, cable stripper, Eversharp 66/110 cut blade, probe pic, carrying case.Fluke Networks Pro-Tool Kit - Six Tools in One Place

The most essential tools for electrical and telecom technicians in our sleek form-fitting PVC dur-a-grip tool pouch - holds your tools securely inside, even upside down..All the tools you need (in one pouch) to cut, strip, clean and make connections.Application/usage: Six tool kits combinations available for a multitude of applications.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.D914 and D814 industry standard punchdown tools make for solid terminations.All kits include ergonomically designed Dur a Grip pouch for convenient tool storage on belt.Cut and strip wire cleaner and faster with the electricians D snips.Includes: IS50 with D914S impact tool, D snips, cable stripper, eversharp 66/110 cut blade.Fluke Networks Pro-Tool Kit - Tools and Storage in One

Fluke Networks Contractor telecom kit features punch down tool for reliable terminations. Contractor telecom kit offers a cable stripper that quickly rings and slits many types of cable..D814 industry standard punch down tool for reliable terminations.Eversharp 66/110 cut blade provides flexibility for different block and jack terminations.Cable stripper quickly rings and slits many types of cable.Cut and strip wire cleaner and faster with the electricians D-snips.Connect to jacks for testing with the standard 4-wire modular adapter.Soft zippered pouch keeps your tools all in one convenient place.Includes a TS 30 test set with angled bed-of-nails cord, D814 impact tool, eversharp 66/110 cut blade, electrician's D-snips, cable stripper, standard 4-wire modular adapter and probe pic.Fluke Networks Contractor telecom kit is made for technicians who install, test and troubleshoot phones and has high impedance datasafe operation.

The Tripp Lite T100-001 black/blue crimping tool with cable stripper, strips flat and round cable. It terminates 4-wire RJ11, 6-wire RJ12 and 8-wire RJ45 modular plugs. This crimping tool has easy-grip handle for added grip..RJ11/RJ12/RJ45 crimping tool with cable stripper for reliable operation.Comes in black/blue color.Terminates RJ11, RJ12 and RJ45 modular plugs.Strips flat and round cable.Sturdy construction for long life.Easy-grip handle feels comfortable in your hand.Contains quick start guide.RoHS and Green compliant.Comes with 1 year limited warranty

MS2-FTK MicroScanner copper and fiber cable verifier kit helps find common errors by displaying graphical wiremap, pair lengths, distance to fault, and far-end device. Integrated RJ11, RJ45, and coax test ports support many types of low-voltage cable testing with no need for adapters. Test and verify your fiber connections with the SimpliFiber Pro power meter and light source..Network copper and fiber test kit measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports.Dimensions: 1.4"H x 3"W x 6.4"D.Comes in black and yellow.Kit includes: MicroScanner cable verifier and SimpliFiber Pro (FTK1000) fiber test kit (SimpliFiber Pro optical power meter, 850/1300 multimode source, magnetic strap attachments, carrying case, and SC power-meter adapter).Test connectors: shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs; MicroScanner2: F-connector for coaxial cable.Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs.Features a monochrome LCD with backlight.MicroScanner solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices.MicroScanner PoE: solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco's Universal Power over Ethernet) compatible PoE devices.MicroScanner2 detects the advertised speed of 802.3 Ethernet ports with speeds of 10Mbps, 100Mbps, and 1Gbps.Verifies media services: 10/100/1000 Ethernet, POTS, and PoE.Tone generator produces 500kHz digital, 400kHz and 1kHz analog tones.Supports toning and cable mapping with a Fluke Networks digital IntelliTone probe

Material: Rubber handle.Industry standard, internationally accepted.Hook and spudger tools are built into the handle.Automatic spring handle - choose low impact for 24/26 gauge wire or high impact for 22-gauge wire.D914 and D914S impact tools accept phillips-head or flat screwdriver blade.Convenient blade storage built into the handle.Adapter blade allows technician to use a variety of torque tool bits and sockets.Easy blade insertion, locks in place.Application: Punching, Cable termination.Package Contents: D914 Impact tool, eversharp 110 blade, eversharp 66 blade, blade.Eversharp 110 blade, eversharp 66 blade.1 year limited warranty

All kits include ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt..Material: Rugged PVC pouch, aluminum stripper.All kits include ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt.D914 and D814 industry standard punchdown tools make for solid terminations.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.Cut and strip wire cleaner and faster with the electricians' D-Snips.Six tool kits combinations available for a multitude of applications.D914S impact tool provides fast, comfortable reliable connections to blocks and jacks.D-snips for faster cleaner safer no-slip cutting and stripping.Cable stripper strips outer Jacket of UTP/STP and other flexible cables without damaging wires.Package Contents: Pro-tool kit IS60, D914S impact tool, D-Snips, cable stripper, maglite,sharpie and eversharp 66/110 cut blade.Includes: Pro-Tool Kit IS60, D914S Impact tool, D-Snips, Cable Stripper, Maglite, Sharpie And Eversharp 66/110 Cut Blade

The Fluke Networks® Jack Rapid™ JR-PAN-2 punchdown tool in yellow, reduces time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle. The patented jack has built-in blade that cuts off the excess wire after it seats in the connector, eliminating the need for a secondary trim step. It offers simple, one-handed operation, with an ergonomically designed handle that reduces hand fatigue..Punchdown tool reduces time and increases accuracy by seating and terminating all wires.Dimensions: 5 1/2"H x 5 1/2"W x 1 3/4"D.Comes in yellow color.Patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle.Allows to terminate jacks eight times faster than traditional impact tools.Seats and terminates all wires simultaneously.Built in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.One handed operation with an ergonomically designed handle which reduces hand fatigue.Does not punch into the palm of your hand or through drywall again

Fluke Networks Termination test kit consists of IntelliTone pro probe IS60 pro-tool, multi-language getting started guide, user CDs, battery, deluxe fluke networks carry case. Kit has an approximate weight of 12.8 oz..Reduce test time and user error.Eliminate awkward test adapters.Rule out service problems fast.Locate elusive cables in seconds.Repair or replace tools less often.Environmental parameters: Min operating temperature 32 degree F.Technology: LCD.Color support: Monochrome.Features: Backlight.Connectors: F connector, RJ-45, RJ-11.Compliant Standards: FCC class A, EN 61326-1, EN 61010-1.Cables included: 1 x RJ-45 to RJ-45 patch cable, 1 x RJ-11 cable.Cable type: UTP, FTP, SSTP.Included accessories: Carrying case, lanyard, Pro-Tool kit IS60.Weight: 12.8 lb.Termination test kit.Fluke Networks® Termination test kit with a microscanner2 cable verifier tests all common media types including RJ11, RJ45 and coax without using adapters.

Fluke Networks® MS2-KIT MicroScanner2 Professional kit includes MicroScanner2 cable verifier with main wiremap adapter, remote identifiers #2-7 and IntelliTone Pro 200 probe. Comprises of shielded twisted-pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter and F Coax push on patch cord for effective detection. Comes with accessory soft pouch for user convenience. Features two AA alkaline batteries and a 9 V alkaline battery for long working of the verifier. Kit has MicroScanner2 getting started guide, MicroScanner2 owners CD, IntelliTone Pro getting started guide and IntelliTone Pro owners CD for trouble-free usage of the device. All the components come in a deluxe Fluke Networks carry case for added convenience..MicroScanner2 professional kit is suitable to verify voice/data/video cable and services.Measures 6.4"H x 3"W x 1.4"D.Supports copper media for high speed transmission.F connector, RJ-11, RJ-45 interfaces/ports for flexible connectivity.FTP, SSTP, UTP cables for long distance transmission.Distance to fault, Length, PoE, speed test copper cables to 1000Base-T, Wiremap tests, tools and measurements.Requires operating temperature of 32 - 123 deg F, storage temperature of -4 - 140 deg F and 90 percentage relative humidity.Operates at altitude 4000 m (operating) and 12000 m (storage).Monochrome, backlight LCD display provides brighter images.Locates virtually any cable or wire pair with IntelliTone digital and analog toning.Rubber over mold enhances grip and increases ruggedness.Contains accessory soft pouch, 2 x AA alkaline batteries, 1 x 9 V alkaline battery, MicroScanner2 getting started guide, owners CD.Contains cable verifier with main wiremap adapter, remote identifiers, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord.Meets N10140 C-Tick EMC standard, FCC Part 15 Class A, CE European Union Directives.Weighs 0.8 lbs.Comes with 1 year warranty.Fluke Networks® MicroScanner2 Professional kit tests voice/data/video cable/services with the help of a revolutionary user interface. Includes essential verification components.

The Fluke Network 10061120 D914S impact tool has EverSharp 110 & EverSharp 66 blade for precise cutting. It features automatic spring handle that confirms low impact for 24/26 ga wire or high impact for 22-gauge wire. It has convenient blade storage that built for easy carry. With a rubber handle and special ergonomic design, this impact tool ensures better grip and minimized hand fatigue..Industry standard, internationally accepted.Hook and spudger tools are built into the handle.Automatic spring handle --choose low impact for 24/26 ga wire or high impact for 22-gauge wire.D914 and D914S impact tools accept Phillips-head or flat screwdriver blade.Convenient blade storage built into the handle.Adapter blade allows technician to use a variety of torque tool bits and sockets.Easy blade insertion, locks in place.D914STM soft touch impact tool features a rubber handle and special ergonomic design for better grip and to reduce hand fatigue.Copper type: punchdown/impact.Type : copper.Accepts all fluke networks industry standard blades. Punch down tool measures 1.4" x 5.9" x 1".Fluke networks D914s impact tool 110 eversharp 66 blade.Impact tool with EverSharp 110 and EverSharp 66 blade, accept Phillips-head or flat screwdriver blade.

Make effortless, uniform connections with Fluke Network''s D814, all-in-one, telecom punchdown tool. Its adjustable impact wheel has high and low settings for any type of termination..66 blades.Lightweight and easy to use.Allows low impact for 24 and 26 gauge wire or high impact for 22 gauge wire.Automatic spring mechanism provides right impact to seat and/or terminate wires.Compartment at the end of the tool stores an extra blade.Includes: D814 10055200 impact tool, eversharp 110 blade.Application/usage: Punching, cable termination.Warranty: Lifetime.Fluke Networks Impact Tool - Seats and Terminates Wires

The D914S impact tool provide quality terminations on the first punch, helping to achieve the highest quality possible on network installations. The only impact tool that combine torque and impact in one tool..D914S Impact Tool w/Eversharp 66/110 Cut Blade.Special ergonomic design for better grip and to reduce hand fatigue.Automatic spring handle: choose low impact for 24/26 gauge wire or high-impact for 22 gauge wire.Use the spudger to remove the cross-connect module from the mounting brack.Application/usage: Cable termination.Accept Phillips-head or flat screwdriver blade.Includes D914S 10061810 impact tool, EverSharp 110 blade, EverSharp 66 blade.Included accessories: D914S 10061810 impact tool, Eversharp 110 blade, eversharp 66 blade.Fluke Networks D914S Impact Tool - User-Friendly Network-Installation Tool

Startech.com® Crimp tool with cable stripper has sturdy metal construction for reliability even after heavy use. Crimp tool includes RJ45 RJ11 crimp tool with cable stripper and suitable for networking/home/office/telecom technicians..Crimp on both RJ11 and RJ45 cable connectors from a single tool with a built in wire stripper for extra convenience.Application/usage: IT technicians who build custom cable lengths for networking and/or telephone cables, contractors looking for a cost effective, easy to use tool for networking a home or office, telecom technicians.Sturdy metal construction for reliability even after heavy use.RJ45 ethernet connector crimp socket.RJ11 connector crimp socket.Saves valuable time and effort on any related cable job acting as both cable crimper and cable stripper.Includes: 1 x RJ45 RJ11 crimp tool with cable stripper.Standards: RoHS compliance.Warranty: 2 years.StarTech.com RJ45 RJ11 Crimp Tool - Great for Networking Cables

HV Tools Professional Tool Kit with lockable case is designed for multi purpose maintenance which includes screwdrivers, pliers, crimpers, strippers, cable tester and a digital multimeter..Professional Tools Kit.Includes screwdrivers, pliers, crimpers and strippers for different applications.Includes a compact digital multimeter and cable tester.Tools are fixed inside the case

Make effortless, uniform connections with fluke network's D814, all-in-one, telecom punchdown tool, its adjustable impact wheel has high and low settings for any type of termination..Convenient blade storage built into the end of the handle.Accepts standard industry blades.Lightweight and easy to use.Adjustable spring impact mechanism allows low impact for 24 - and 26 gauge wire or high impact for 22 gauge wire.Easy blade insertion.Includes: D814 series automatic impact tool, EeverSharp 110 blade, Eversharp 66 blade, free blade 934.D814 series automatic impact tool has adjustable spring impact mechanism allows low impact for 24- and 26-gauge wire or high impact for 22-gauge wire.

Signal interference from sources in the environment can make tracing cable a frustrating process. The Fluke Networks Pro3000 filtered probe blocks interference and "stops the buzz" by obstructing these signals allowing you to hear the tone you are tracing loud and clear. Probe's ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood, or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. Line cord features angled bed-of-nails clips and a rugged RJ11 plug for direct access to phone and data jacks without adapters. External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs. Use the SmartTone capability of the Pro3000 analog tone generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification up to 10 miles away..Filtered probe and tone generator kit for easy cable tracing.Probe dimensions: 1.6"H x 9.8"W x 1.3"D; tone generator dimensions: 1.4"H x 2.7"W x 2.4"D.Filtered probe comes in yellow and features a black replaceable tip; tone generator comes in blue.Innovative filtered probe obstructs signal of 60Hz and its harmonic frequencies.SmartTone technology provides five distinct tones for precise pair identification.Sends loud tone up to 10 miles on most cables.Slide switch selects continuity or tone mode.Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures.External switch allows for selection of solid or alternating tone options, indicated with solid or flashing LEDs.Supports headset via 3.5mm audio port for use in noisy environments.Angled bed-of-nails clips allow for easy access to individual pairs.RJ11 connector is perfect for use on telephone jacks.Supports switching between filtered and unfiltered modes with one button press.Utilizes an auto-off feature that deactivates the probe after five minutes to conserve battery life.Includes one spare tip.Frequency modes: 1000Hz nominal solid frequency and 1000/1500Hz nominal alternating frequency.Overvoltage protection: 60VDC in tone/polarity mode.Output power in tone mode: 8dBm into 600 ohms.Output voltage level in continuity mode: 8VDC with fresh battery.Both probe and tone generator require a 9V alkaline battery

Startech.com® Punch Down Tool comes complete with 2 metal bits. Punch down tool features two all metal, removable/replaceable bit assemblies and an integrated holder for spare bits..Comes complete with 2 metal bits. (66 and 110 bit).Features two all metal, removable/replaceable bit assemblies, and an integrated holder for spare bits.Removable and replaceable bit assembly.Integrated holder for spare bit.Includes: 110PUNCHTOOL punch down tool, 2 x metal bits (66 and 110 bit), bit assemblies.Standards: RoHS complaince.Warranty: 2 years.Punch down tool with 110 and 66 blades features two all-metal, removable/replaceable bit assemblies, and an integrated holder for spare bits.

HV Tools Punch Down Tool for Lan & Telecom 5 Pair UTP(24 AWG) both 110 Type Cable & Cross is a professional grade, high-volume Punch Down Cable Installation Tool, with adjustable impact, is the perfect multi-purpose tool for punching down Cat5/Cat6 cables. Each blade contains a cutting and non-cutting side. The blade not being used is stored in the handle compartment. Adjustable High/Low actuation setting accommodates termination requirements or installer preference..Punch Down Tool.2 x 4 x 9.professional grade, high-volume Punch Down Cable Installation Tool, with adjustable impact, is the perfect multi-purpose tool for punching down Cat5/Cat6 cables..Each blade contains a cutting and non-cutting side. The blade not being used is stored in the handle compartment..Adjustable High/Low actuation setting accommodates termination requirements or installer preference.