Network Cables for Office

The Comprehensive Cat6 snagless patch cable of 100' long, is suitable for distributing voice, video and data on high speed Ethernet and Gigabit networks at 350 MHz bandwidth. This RJ-45 male to RJ-45 male cable in white, has molded snagless boots that offer quick and easy installation while assuring superior strain relief. The 4 twisted pair cable has 24 AWG bare copper stranded wire for good conductivity. It has a PVC jacket that offers protection against severe damage. The cable has gold-plated contacts for good transmission ability..Cable length: 100'.Connections: RJ45 male on first end to RJ45 male on second end.Durable polycarbonate connector, copper alloy plated with 50u gold contact for good connectivity and polyvinyl chloride jacket for protection.Meets all Cat5E TIA/EIA, EIA/TIA 568B.2 and RoHS standards.Good performance.Comes in white color.Supports voice/data/video distribution applications up to 350 MHz.Network device supportable.Conductors: 4 Twisted pairs 24 AWG bare copper stranded cable.Has 89 Ohm/km maximum conductor DC resistance and 100 Ohm/km minimum insulation resistance.Weight: 1.5 lbs..Comes with lifetime limited warranty.Network Patch cable with molded low profile snagless boot makes installing quick and easy.

Belkin® 100' CAT 5e RJ-45 Male/Male Network Patch Cable, Gray.CAT 5e networking assembled patch cable is perfect in conjunction with 10 and 100 base-t networks.Easy-to-install 100' long cord.RJ-45 male to male connectors for reliable connections.Ultra flexible PVC jacket offers double shielding against outside noise.Bare stranded copper construction reduces crosstalk and interference.Comes in gray color for a new look.Meets CM flame retardant test to minimize fire hazards.The 24 AWG x 4 pairs allows more of the signal to pass through without distortion or signal loss.50-micron Gold-plated connector plating for good conductivity.Has 100 + or - 15 Ohm characteristic impedance at 1 - 350 MHz for better signal.Features 89.2 ohm/km/20 deg C max conductor resistance and AC 1.75 kV/0.15 sec dielectric strength for reliable operation.Structural return loss of 19 dB min at 350 MHz and copper conductor for better conductivity.Meets all requirements and standards of ISO/IEC 11801, TIA/EIA-568-B.2.Perfect in conjunction with 10 and 100 Base-T networks.Comes with limited lifetime warranty.Belkin® A3L791-100 100' Gray CAT 5e network patch cable is useful for 10/100 Base-T Ethernet application. RJ-45 male to male connectors provide reliable connection.

Patch cable..CAT-6 for seamless connection over a network.Dual gold-plated RJ-45 male connectors for a flawless connection.7' CAT-6 allows convenient tethering

Tripp Lite N201-007 RJ-45 CAT-6 Patch Cable.CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.7' CAT-6 for easy tethering.Comes with a lifetime limited warranty

Category 5e for Network Device.RJ-45 Male.RJ-45 Male.5ft.Black

Standard RJ45 connectors.Black.Length: 3'

The C2G 3975 6' black Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Category 6 for Network Device.RJ-45 Male.6ft.Black.Certifications & Standards: TIA/EIA.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Comes with lifetime warranty

Upgrade your network and enjoy clean and clear transmissions with the Belkin CAT6 Ethernet Patch Cable. This patch cable lets you connect a laptop or desktop computer to a wall outlet, modem, router or another networking device. It meets the CAT6 standard and is suitable for use with 100/1000BASE-T networks. Patch cables are also handy in home offices and hotel rooms to establish a wired Internet connection..7-ft. CAT-6 Ethernet patch cable for connecting to LANs or the Internet.Ideal for use with 100-1000BASE-T networks.RJ45 plugs with 50-micron gold-plated connectors for clear signal.4 twisted pairs of stranded copper wires prevent crosstalk.Snagless design prevents cracking and breaking.CONNECT EASILY TO A COMPUTER NETWORK

The C2G ® 4' RJ-45 male/male Cat6 blue snagless unshielded Ethernet network patch cable with PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.4ft.Blue.Tripp Lite 6' Null modem gold cable uses copper conducting material to resist corrosion and allows you to connect 2 serial devices that require cross-wired configuration.

Connect your laptop to a LAN or Internet using this patch cable. Compatibility with CAT-5e standards delivers speeds of up to 1000MB/s, while the stranded copper wires in this Belkin Ethernet patch cable minimize electromagnetic interference to improve transmission quality..CAT-5e Ethernet patch cable with extra headroom for connecting to LANs or Internet.16.4' cable length.RJ45 plugs with 50-micron gold-plated connectors.Features four unshielded twisted pair (UTP) 24 AWG stranded copper wires to reduce electromagnetic interference.Meets or exceeds the CAT-5e standard.Suitable for use with 100/1000BASE-T networks.Wires are housed in a durable PVC outer jacket for abrasion and corrosion resistance.Snagless design prevents cracking and breaking.Enjoy noise-free transmissions with this Belkin Ethernet patch cable.

The C2G 31341 5' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty.Category 6 for Network Device

The C2G ® 10' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.RJ-45 Male.10ft.Yellow

Snagless duplex patch cable..CAT-6 to conveniently connect network devices.Capable of transmitting data at 100 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.10' CAT-6 for easy tethering.Comes with a lifetime limited warranty

This Cat6 UTP cable with RJ45 connectors is recommended for connecting network components like printers, computers, copiers, routers, servers, modems and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this one-foot black cable ensures peak performance throughout your local area network (LAN)..1 foot Cat6 Cable.Cat6 UTP patch cord rated for high-speed 1 Gbps communications.Over 38% slimmer than standard Cat6 cables to increase airflow in full racks.Easy to route around corners and through crowded cable management panels.Snagless RJ45 connectors prevent tabs from being damaged during installation.This product is covered by a Lifetime Limited Warranty

591cb0d97295d885d56deeb8a6f9601f.This cable is perfect for connecting your data devices.Cable length: 25'.RJ45 to RJ45 connectors.Features: snagless.Meets or exceeds RoHS, TIA/EIA-568-B.1-2001, and ETL standards.Lifetime manufacturer limited warranty

This Cat6 UTP cable with RJ45 connectors is recommended for connecting network components like printers, computers, copiers, routers, servers, modems and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this two-foot black cable ensures peak performance throughout your local area network (LAN)..2 foot Cat6 Cable.Cat6 UTP patch cord rated for high-speed 1 Gbps communications.Over 38% slimmer than standard Cat6 cables to increase airflow in full racks.Easy to route around corners and through crowded cable management panels.Snagless RJ45 connectors prevent tabs from being damaged during installation.This product is covered by a Lifetime Limited Warranty

The C2G® 14' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.14ft.Blue.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.42 lbs..Comes with lifetime warranty

Connect your computer system to a router, switch or hub with the Monoprice CAT-6 Cable that offers reliable Ethernet connectivity. Both ends of this networking cable play host to RJ-45 male connectors for seamless connection between devices. It has a durable and good-quality jacket that preserves the integrity of the high-quality copper conductor..CAT-6 for seamless connection over a network.Designed to transmit data at 1100 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.The Monoprice 2' CAT-6 Ethernet Network Cable, Gray, is ideal for 10 Gigabit Ethernet networks and provides dependable data transfer.

CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.10' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 7'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

The C2G ® 7' orange Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 7'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in orange color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty.StarTech.com® HDMM10 10' HDMI Cable with ultra HD male/male HDMI connectors supports 4k x 2k video signal. Offers multimedia interface with clear audio/video signal.

The C2G ® 25' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. This cable, with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 25'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.71 lbs..Comes with lifetime warranty.The Tripp Lite N002-030-BL 30' CAT-5e RJ-45 Molded Patch Cable, Blue, is apt for 1000 Mbps networks and facilitates error-free data transfer.

The Belkin™ A3L980-01-ORG-S CAT-6 1' snagless Ethernet patch cable in orange color, helps in connecting your network outlet with a patch panel or to terminate your own patch cords. This cable consists of four twisted pairs of stranded 24 AWG copper wires that prevent crosstalk. This snagless cable is suitable for use with 100/1000Base-T networks. The cable features 50 micron gold-plated male RJ-45 connectors to ensure clear transmission and the snagless mold protects RJ-45 tab from damage during installation..CAT6 snagless Ethernet patch cable is perfect for connecting to LANs or the internet.Cable length: 1'.Comes in orange color with PVC jacket, HDPE insulation.Output Voltage: 18.5 V.Power Capacity: 65 Watt.Output connectors: 1 x power DC jack 4.5 mm.Included Accessories: 4.5mm to 7.4mm power DC dongle.Dimensions (WxDxH): 4.2 in x 1.9 in x 1.1 in.Designed For: HP 250 G3, 25X G2; Elite x2; EliteBook 25XX, 725 G2, 745 G2, 755 G2, 820 G1, 820 G2, 840 G1, 840 G2, 850 G2; EliteBook Folio 1040 G2, 10XX G1; EliteBook Revolve 810 G1, 810 G2; Mobile Thin Client mt41; ProBook 430 G1, 430 G2, 450 G2, 45X G1, 640 G2, 64X G1, 65X G1; ZBook 14, 14 G2, 15u G2.Ideal for use with 100-1000Base-T networks.Snagless, molded, strain relief design prevents cracking and breaking.PowerSum tested, CM flame-retardant test, 2.5 kV spark test.Meets ISO/IEC 11801; TIA/EIA-568-B.2-1 standards

Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.50' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.1 x RJ45 male connector A/B.PVC 4-pair stranded UTP.25'.Conductor: Copper.System requirements: For 1000 Base-T (1 Gbps ethernet), 10/100 Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications as well as EIA/TIA application.Feature molded connectors with integral strain relief.High-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum.Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation.Deliver stable performance up to 550MHz/1 Gbps communication

The C2G ® seven-foot red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. With its 24 AWG stranded bare copper conductor, it minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.7ft.Red.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty

Ensure a reliable Ethernet network connection between your system and router using the Tripp Lite N002-002-BK CAT-5e Cable. Both ends of this networking cable are fitted with RJ-45 male connectors for smooth transfer of signals. Its PVC jacket properly insulates the copper conductor and is flexible, reducing the possibility of cable damage..Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.2' CAT-5e allows convenient tethering.Comes with a lifetime limited warranty.The Tripp Lite N002-002-BK 2' RJ-45 CAT-5e Patch Cable, Black, supports 1000 Mbps networks to provide uninterrupted data transfer.

CAT-6 for seamless connection over a network..Designed to transmit data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.10' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty

The C2G® 10' male to male category 5e blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 5e.10ft.Blue.Connector on first end: 1 x RJ-45 Male network, connector on second end: 1 x RJ-45 Male network.Device supported: Network device, Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm + 0.15 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.02 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.24 lbs..Comes with lifetime warranty

Ensure a reliable Ethernet network connection between your system and router using the Tripp Lite N201-007-BK CAT-6 Cable. Both ends of this networking cable are fitted with RJ-45 male connectors for smooth transfer of signals. Its PVC jacket properly insulates the copper conductor and is flexible, reducing the possibility of cable damage..CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.7' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty.The Tripp Lite N201-007-BK 7' CAT-6 Patch Cable, Black, supports 10 Gigabit Ethernet networks to provide uninterrupted data transfer.

Category 6 for Network Device.RJ-45 Male.RJ-45 Male.1ft.Blue

C2G® CAT5E UTP Patch cable in blue color connects network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking equipments. The 25' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. H-D PE shielding on 24 AWG conductors secure data from electromagnetic and radio frequency interference. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Snagless design of the RJ45 male-to-male connector prevents wear and tear during installation. Suitable for application involving voice, data and video distribution in Ethernet network..Enhanced Category 5 high-speed cabling to distribute data, voice and video.These cables will handle bandwidth intensive applications up to 350 MHz and beyond.Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 MHz wire.1 x RJ-45 Male Network to 1 x RJ-45 Male Network

The C2G ® 1' orange Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 1'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in orange color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.05 lbs..Comes with lifetime warranty.Comes with lifetime warranty

Efficient and reliable, the Comprehensive CAT6SHBLK-1000 CAT-6 Cable is a great option for Ethernet network connections between a computer system and a router, switch or hub. This networking cable comes with bare ends and can be attached to modular connectors to link devices of your choice. It has a durable and good-quality PVC jacket that preserves the integrity of the high-quality copper conductor..CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.bare wire connectors on both sides for dependable network connectivity.1000' CAT-6 that can be used as per your needs.Comes with a lifetime limited warranty.The Comprehensive CAT-6SHBLK-1000 1000' CAT-6 Shielded Twisted Pair Network Cable, Black, supports 10 Gigabit Ethernet networks to facilitate optimum data transfer.

CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.10' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty

CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.10' CAT-6 for easy tethering.Comes with a lifetime limited warranty

The C2G 22014 15' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.15ft.Blue.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.4 lbs..Comes with lifetime warranty

The C2G 10' red Cat5e snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with FR-PVC jacket truncates both impedance and structural return loss. The cable features 24 AWG stranded bare copper conductor, which minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modem DSL/cables, patch panels and other high-performance networking applications..Category 5e for Network Device.RJ-45 Male.10ft.Red.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, EIA/TIA 568B.2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.23 lbs..Comes with lifetime warranty

The C2G ® 14' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 14'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.4 lbs..Comes with lifetime warranty

The C2G ® 6" RJ-45 male/male Cat6 blue snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. It features RJ-45 male connectors on both ends for enhanced connectivity. The 24 AWG stranded bare copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. This bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modems, DSL/cable modems, patch panels and other high performance networking applications..Type: Network Cable.Cable Type: Category 6.Cable Length: 0.5'.Size: 6".Color: Blue.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color.Diameter: 6.2 mm + 0.03 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.03 lbs..Comes with lifetime warranty.952 C2G - KVM & Networking 6" Cat6 Snagless Unshielded Network Patch Cable - Exponentially reduces impedence and structural return losses

The C2G 22011 15' Cat5e 350MHz snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and FR-PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 15'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color and features polycarbonate connector, FR-PVC jacket, molded PVC hood, HDPE insulation and copper alloy contact.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.55 mm Nominal thickness, 5.3 +/- 0.15 mm O.D., 0.95 +/- 0.02 mm Dia. conductor.DC resistance: 89 Ohm/km maximum, Insulation resistance: 100 Ohm/km minimum, Dielectric strength: 500 MV/m.Frequency: Up to 350 MHz.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.35 lbs..Comes with lifetime warranty.Category 5e for Network Device.C2G® 29932 8' Black power extension cord with NEMA connectivity on both ends allow you to extend power cord for flexibility. The 16 AWG cord provides reliable connection.

Cat5e snagless network patch cable for fast Ethernet network, requiring bandwidth-intensive voice, data/video distribution applications..Cat5e snagless network patch cable for fast Ethernet network, requiring bandwidth-intensive voice, data/video distribution applications.Cable length: 7'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in gray color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.17 lbs..Comes with lifetime warranty

CAT-6 cable provides an easy connection for network devices and supports data transfer speeds of up to 1,000 Mbps..Dual gold-plated RJ-45 male connectors for a flawless connection.10' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty.10' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty

5 ft. CAT6 Ethernet cable - 10 Pack - ETL Verified - Blue CAT6 Patch Cord - Snagless RJ45 Connectors - 24 AWG Copper Wire - UTP Ethernet Cable (N6PATCH5BL10PK).100% COPPER WIRING: Each CAT6 Ethernet cable is built with 100% copper wiring to prevent weak power delivery and equipment damage, compared to copper-clad aluminum wire cables.CABLE PERFORMANCE: Length: 5 ft. (1.5 m) Color: Blue | Cable Structure: 4 Pair UTP | Connector Type: Snagless | Jacket Material: PVC | Wire Gauge: 24 AWG | Wiring Standard: ANSI/T568B.CAT6 PATCH CABLE MULTIPACK: This 10 pack of 5 ft. Blue patch cords is a convenient and affordable option for businesses in need of multiple snagless ethernet cables.EASY INSTALLATION: Blue snagless Ethernet cords won’t get caught in wiring conduits during installation; Compatible w/Cat5e & earlier standards; Molded boots available for constrained spaces.ETL VERIFIED: This CAT6 cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability. Each CAT6 patch cord is tested to comply with ANSI/TIA-568-D Category 6 requirements.Bulk CAT6 Patch Cables | Snagless | 100% Copper Wire | Blue | Lifetime Warranty

Staples Brand.10 ft.Yellow.Patch Cable

CAT-6 for seamless connection over a network.Designed to transmit data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.7' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.Integrated cable management.Answer/end calls, adjust volume and mute the microphone on the device.For use with Microsoft OC and LYNC Enterprise class software

Snagless molded patch cable..CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.20' CAT-6 for easy tethering.Comes with a lifetime limited warranty

This Cat6 UTP cable with RJ45 connectors is recommended for connecting network components like printers, computers, copiers, routers, servers, modems and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this seven-foot blue cable ensures peak performance throughout your local area network (LAN). This Cat6 UTP patch cord is more than 38% smaller in diameter than standard Cat6 cable. This increases airflow in tight spaces, which helps keep your equipment cool and properly functioning. It also makes the cable easier to install around corners and through cable management panels. The RJ45 connectors' snagless design protects the locking tabs from being damaged or broken off during installation. This Cat6 UTP patch cable features a blue PVC jacket. The color-coding allows easy, fast identification in a crowded rack or workstation and helps prevent the cable from becoming inadvertently disconnected. Manufactured from 28 AWG copper wire, the four-pair stranded cable is rated for speeds up to 1 Gbps. The ends feature 50-micron gold plating to help ensure the most accurate signal transfer possible. Integral strain relief gives the unshielded cable extra flexibility, reduces stress, and helps the cable move freely without cracking or breaking loose from the connector. The N201-S07-BL is backed by a limited lifetime warranty, ensuring reliability and performance..This cable is perfect for connecting your data devices.Cable length: 7'.RJ45 to RJ45 connectors.28AWG blue cable has stranded copper conductor with PVC jacket to protect stranded copper conductor from environmental factors.Meets or exceeds REACH and RoHS standards.Cable features molded construction.Lifetime manufacturer limited warranty

The C2G 27153 10' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..RJ-45 Male.10ft.Black.Features black polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.25 lbs..Comes with lifetime warranty.6 outlets surge protector features 15 A, 120 V, 1800 W, 2 position on/off switch/15 A AC circuit breaker.