Network Power Supplies

The Schneider Electric black 1.44 kVA metered rack mount power distribution unit with NEMA 5-15P input receptacles and NEMA 5-15R output receptacles provides active metering to enable energy optimization and circuit protection. This power distribution unit includes real power monitoring, a temperature/humidity sensor port, locking IEC receptacles and ultra low profile circuit breakers..Voltage: 120 VAC, Current: 15 A input, Power rating: 1.44 kVA.Comes in black color, Dimensions: 35.5"H x 2.2"W x 1.7"D.Form factor: Horizontal rackmount, toolless-mount, vertical rackmount, Rack height: 0U.Cord length: 10', Number of cord/cable: 1.Supports Web, SNMP and Telnet management.Includes input NEMA 5-15P receptacles and 10 NEMA 5-15R output receptacles.Includes real power monitoring, a temperature/humidity sensor port, locking IEC receptacles and ultra low profile circuit breakers.Contains Metered rack PDU, installation guide, rack mounting brackets, safety guide and serial configuration cable.Meets cUL, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL, REACH and RoHS certifications and standards.Weight: 8.98 lbs..Comes with 2 years warranty

Output Power: 3600 W.9PXM Split-phase Power Module 4 kVA.3600 W

The APC® AP8632 metered-by-outlet with switching rack power distribution unit features 24 NEMA 5-20R output receptacles for connectivity. It provides remote individual outlet control to remotely manage outlets. This PDU has local current monitoring display to monitor current drawn by the circuit. It offers real power monitoring and a temperature/humidity sensor port. Through secure Web, SNMP or Telnet interfaces, one can access, configure and control switched rack PDUs..Power distribution unit provide active metering of individual outlets and remote on/off switching control of individual outlets.Dimensions: 72"H x 2.2"W x 2"D, 10' cable.Comes in black color.Receptacles: NEMA L5-30P (input), 24 NEMA 5-20R (output).Power: 2.88 kVA, 30 A, 120 VAC.Form factor: Rack-mountable, vertical.Management: Web, SNMP and Telnet.Frequency: 50/60 Hz.Environmental conditions: 23 - 113 deg F, 5 - 95% (humidity).Firmware upgradable and offers overload protection.Includes installation guide, rack mounting brackets, safety guide and serial configuration cable.Meets cUL, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL listed, RoHS, REACH certifications and standards.Weight: 17.71 lbs..Comes with 2 years warranty.Includes installation guide, rack mounting brackets, safety guide, serial configuration cable.Certifications and standards: cUL Listed, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL Listed, RoHS, REACH.Weight: 8.05 Kg.Warranty: 2 years repair or replace.APC® Rack power distribution unit offers advanced power control with individual power metering and is rack-mountable.

Ensure that your servers and other network equipment continue to operate during power outages with the help of the Eaton 5P750 UPS. With its output power capacity of 600 W, this line-interactive UPS protects your array from unexpected surges in the energy supply. It functions on a 7000 mAh battery that provides a run time of 4 mins at full load and requires less recharge time. Equipped with an intuitive display screen, it allows improved control and easy navigation for added convenience..600 W UPS for seamless operations in case of blackouts or brownouts.Sealed lead acid battery offers a run time of 4 mins at full load.Dimensions: 9.1"H x 5.9"W x 13.6"D.Output voltage of 120 VAC to ensure adequate power supply.Load protected, on battery and fault aid in seamless navigation.Tower mountable design makes it easy to install.Comes with 8 outlets, a RS-232 (RJ45) ports and USB port as standard (HID) and NEMA 5-15R for seamless connectivity.6' cord lets you set up your system at a distance.CE, CISPR22 class B, cULus, EN 55024, Energy star, FCC part 15 class B, IEC 62040-2 C1-C2, RoHS, UL 1778, UL497A compliant.3-year limited warranty.The Eaton 5P750 120 VAC UPS helps you maintain power by switching instantaneously to batteries, in the event of a power failure, or even during minor power fluctuations.

Netgear brings even larger PoE budgets on unmanaged switches with Ultra60 PoE++ technology. 16-port switch is perfect for powerful PoE+/PoE++ installations with impressive PoE budget up to 380W, a compact size, plug-and-play installation, and reliable performance at affordable prices. This switch can support all types of PoE installation and features eight high-power Ultra60 PoE++ and eight PoE+ ports with a large budget to keep your devices always-ready..Unmanaged switch provides 16 ports with gigabit Ethernet connectivity to your devices.Eight high-power Ultra60 PoE++ and eight PoE+ ports provide a total of 380W of power.32Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the FCC 47 CFR Part15B (Class A), ICES-003 Class A, EN 55024/55032/55035 (Class A), AS/NZS CISPR 32, VCCI, BSMI CNS13438, KCC standards.Simple setup with no software or configuration needed.Per-port LEDs for port activity and speed.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Auto MDI/MDIX eliminates the need for crossover cables.Non-blocking switching architecture for maximum throughput at wire speed.Standards-based technology ensures interoperability with any standards-based devices in the existing network.802.3at Power Over Ethernet (PoE+) on all models for IP cameras, VoIP/Internet-based phones, wireless access points.Unique PoE technology automatically balances the PoE power based on the device needs, independent of PoE class detected.Enable pre-802.3bt devices using the proprietary PoE mode.Lifetime manufacturer limited warranty

TRENDnet's 65W 4-Port Gigabit PoE+ Injector, model TPE-147GI, allows users to add PoE+ power to a non-PoE switch. Connect the 4-port PoE+ injector to a non-PoE Gigabit switch, and then run Ethernet cables up to 100 meters (328 ft.) to network four PoE devices. This multi-port gigabit PoE+ injector supplies up to 30W of power to four PoE or PoE+ devices. The fanless design on the 4-port PoE+ injector conveniently eliminates operating noise and lowers energy consumption. GIGABIT PORTS: 4 x gigabit ports (data in) and 4 x gigabit PoE ports (data + PoE out). EASY INSTALLATION: No configuration needed, simply connect a PoE network devices to this 4-port PoE+ injector 4-PORT POE: TRENDnet's 65W 4-Port Gigabit PoE+ Injector supplies up to 30W of power to four PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at) devices at industry PoE standards for greater device interoperability POE DISTANCE: The multi-port gigabit PoE+ injector provides four PoE network connections up to 100m (328 ft.) away from the 4-port PoE injector FANLESS DISTANCE: The fanless design of the gigabit PoE+ Injector eliminates operating noise and lowers energy consumption. TRENDnet MANUFACTURER WARRANTY: TRENDnet backs this product with a 3-Year Manufacturer Warranty. NDAA / TAA compliant (U.S. and Canada only). More from the Manufacturer.4 x Gigabit PoE+ ports (Data + PoE out).65W PoE power budget.Supports both PoE (15.4W) and PoE+ (30W) power.Uses IEEE 802.3af / IEEE 802.3at industry PoE standards for greater device interoperability

This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports. This mid/end-span injector is capable of transmitting network data and power up to 328ft (100m) for remote installations. The PoE, PoE+, PoE++ compatibility and selectable power output ensure seamless compatibility with Powered Devices (PD). The TAA-compliant injector includes a Universal Power Adapter for different regions. Multiport PoE Injector supports the IEEE 802.3af, 802.3at, and 802.3bt (Type 3 and Type 4) standards for Power Sourcing Equipment (PSE), delivering up to 52V DC and 95Watts. This flexibility eliminates the need for a separate power source for remote networked devices such as IP cameras, access control devices, remote kiosks (POSs), wireless access points, PoE lighting, and digital signage..4-PORT MULTI-GIGABIT POE INJECTOR: Multiport PoE++ injector supports up to 5Gbps (NBASE-T) w/auto-negotiation; TAA-compliant Power Sourcing Equipment (PSE) delivers power & data over Ethernet cable; Supports PoE/PoE+/PoE++ 95W max; Level-4 ESD protection.SELECTABLE POWER OUTPUT: DIP switch allows user to select the power output between auto-negotiation up to 90W, 95W PoH+, or forced legacy 60W (UPoE); 802.3af/802.3at/802.3bt power modes available on all ports; Total power budget of 160 Watts.MULTI-GIGABIT: Supports 5/2.5/1Gbps & 100/10Mbps; 5GBASE-T/2.5GBASE-T compatible; Provide data & power to Powered Devices (PDs) up to 328ft (100m) w/Cat 5e/6/6a cabling; Supports WoL/PXE/9K Jumbo frames; Unmanaged PoE injector streamlines setup & deployment.RUGGED ENCLOSURE: Durable full-metal housing ensures durability; Mount the PoE injector to a wall or a DIN rail with the included bracket; LAN transformers isolate the input/output data, and a power circuit prevents interference between ports.STATUS LEDS: Top-facing color-coded diagnostic LEDs indicate the current PoE mode per Ethernet port and current PoE power budget of the injector for quick at-a-glance status of the system.This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports.

This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports. This mid/end-span injector is capable of transmitting network data and power up to 328ft (100m) for remote installations. The PoE, PoE+, PoE++ compatibility and selectable power output ensure seamless compatibility with Powered Devices (PD). The TAA-compliant injector includes a Universal Power Adapter for different regions. Multiport PoE Injector supports the IEEE 802.3af, 802.3at, and 802.3bt (Type 3 and Type 4) standards for Power Sourcing Equipment (PSE), delivering up to 52V DC and 95Watts. This flexibility eliminates the need for a separate power source for remote networked devices such as IP cameras, access control devices, remote kiosks (POSs), wireless access points, PoE lighting, and digital signage..4-PORT MULTI-GIGABIT POE INJECTOR: Multiport PoE++ injector supports up to 5Gbps (NBASE-T) w/auto-negotiation; TAA-compliant Power Sourcing Equipment (PSE) delivers power & data over Ethernet cable; Supports PoE/PoE+/PoE++ 95W max; Level-4 ESD protection.SELECTABLE POWER OUTPUT: DIP switch allows user to select the power output between auto-negotiation up to 90W, 95W PoH+, or forced legacy 60W (UPoE); 802.3af/802.3at/802.3bt power modes available on all ports; Total power budget of 160 Watts.MULTI-GIGABIT: Supports 5/2.5/1Gbps & 100/10Mbps; 5GBASE-T/2.5GBASE-T compatible; Provide data & power to Powered Devices (PDs) up to 328ft (100m) w/Cat 5e/6/6a cabling; Supports WoL/PXE/9K Jumbo frames; Unmanaged PoE injector streamlines setup & deployment.RUGGED ENCLOSURE: Durable full-metal housing ensures durability; Mount the PoE injector to a wall or a DIN rail with the included bracket; LAN transformers isolate the input/output data, and a power circuit prevents interference between ports.STATUS LEDS: Top-facing color-coded diagnostic LEDs indicate the current PoE mode per Ethernet port and current PoE power budget of the injector for quick at-a-glance status of the system.This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports.