Network Power Supplies

Startech.com® Gigabit Ethernet fiber media converter card module is designed for applications where multiple chassis-powered media converters are required. Module ensures maximum up-time with link-loss forwarding and remote status monitoring..Cisco Nexus 2000 series fabric extender.Input voltage type: AC, Input voltage range: 90 - 264 VAC, Output power: 400 W, Frequency required: 50 - 60 Hz.Form factor: Plug-in module.Power supply connect directly to the system through connectors attached to the baseboard through cables.One connector is on the baseboard for each power supply.AC input is through an IEC connector mounted on the power supply front panel.Certifications and standards: RoHs.Weight: 2.2 lbs..Environmental: Humidity - 10 - 90% RH (non-condensing), Operating temperature - 0 - 60 deg C, Storage temperature - -10 - 70 deg C.Form factor: Internal.Media type supported: Twisted pair.Includes 1 x fiber media converter, 1 x instruction manual.Certifications and standards: IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z, CE, FCC.Weight: 6.5 oz..Warranty: 2 years.Cisco™ AC power supply is compatible with Cisco™ nexus 2000 series fabric extender and outputs 400 W of power and has frequency ranging from 50 Hz - 60 Hz.

The ION Platform is an intelligent, high-density, multi-protocol system supporting a variety of network interface devices. Designed for both carrier class and enterprise network applications where multiple points of fiber integration and secure network management of the fiber interface devices is essential. NDAA Compliant, TAA Compliant.The system can be made redundant with the use of a second power supply..A single power supply can be used to power all the devices installed in the chassis.The ION 19-slot chassis can support up to two power supply modules which mount in the rear of the chassis.

The Transition Networks® N-GXE-POE-EPS-KIT PoE NIC external power supply kit includes one 40 W power adapter, one low-profile NIC mounting bracket for power cable connector access, one cable assembly and one power cord. This power supply kit offers custom power solution for powering the PoE NIC externally in situations where an HP™ t730 ThinClient cannot supply adequate PoE or PoE+ power..PoE NIC external power supply kit.Dimensions: 125 mmL x 50 mmW x 31.5 mmH.Input frequency range: 47 - 63 Hz.Meets UL60950-1, TUV EN60950-1, BSMI CNS14336, CCC GB4943, J60950-1 standards.Number of outputs: 1, output power: 40 W.DC output connector: 2.1 mm barrel plug, DC output cord length: 1m.Efficiency: Level VI, load regulation: Regulated, input efficiency (typ.): 89.5%.Output DC voltage: 12 V, output rated current: 3.34 A, output current range: 0 - 3.34 A, output rated power (max.): 40 W.Output hold up time (typ.): 50 ms/230 VAC, 15 ms/115 VAC at full load, input voltage range: 90 - 264 VAC, 127 - 370 VDC.Compatible with Thin Client PC.Input AC current (typ.): 1 A/115 VAC, 0.5 A/230 VAC, input inrush current: 65 A/230 VAC, input leakage current: 0.75 mA/240 VAC.Storage temperature: -40 - 85 deg C, working temperature: -30 - 70 deg C with derating.Includes power adapter, 1 x low-profile NIC mounting bracket for power cable connector access, 1 x cable assembly, 1 x power cord.Weight: 9.87 oz.

Cisco Nexus 9300-EX series switches offer a variety of interface options to transparently migrate existing data centers from 100Mbps, 1Gbps, and 10Gbps speeds to 25Gbps at the server, and from 10- and 40-Gbps speeds to 50- and 100-Gbps at the aggregation layer. The platforms provide investment protection for customers, delivering large buffers, highly flexible Layer 2 and Layer 3 scalability, and performance to meet the changing needs of virtualized data centers and automated cloud environments..650W power to port AC power supply for use in Cisco Nexus 9300-EX switches.Input voltage: 90-132 VAC on 7.6A; 180-264V on 3.65A.Energy efficiency rating: 80 PLUS Platinum

600W config 5 power supply for Catalyst 9200 switch series.Autoranging unit supports input voltages between 100 and 240 VAC.Output voltage range is 12 to 12.5V

Cisco Catalyst 9300 series switches are Cisco's lead stackable enterprise access switching platform and as part of the Catalyst 9000 family, are build to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place. The Catalyst 9300 series, including the new Catalyst 9300X models, continues to shape the future with continued innovation that helps you reimagine connections, reinforce security and redefine the experience for your hybrid workforce big and small..1100W power to port AC power supply for use in Cisco Catalyst 9300 switches.Input voltage: 115-240VAC on 12-6A.Energy efficiency rating: 80 PLUS Platinum.Features a power cord for connection to an AC power outlet.Dimensions: 1.58"H x 13.7"W x 3.25"D.Weight: 3.1 lbs.

An alternate 650W AC Power Supply Unit (PSU) which has similar specification as the existing C9K-PWR-650WAC-R has been developed for Cisco Catalyst 9500 Series Switches. This alternate PSU has been fully tested and qualified with Cisco Catalyst 9500 Series Switches that support 650W AC PSU. This PSU will have the same Product ID (PID) as the existing C9K-PWR-650WAC-R..Alternate power distribution unit for Cisco Catalyst 9500 Series switches.Input: 7.6A at 90 - 132VAC@60Hz, or 3.65A at 180 - [email protected] in-rush current 11A.Maximum input volt Amperes: 760VA at 100VAC.Maximum output power per power supply: 650W

Ensure efficient supply of power to a compatible module with the Vertiv Power Supply. This PSU is designed for use with the MPUIQ-SRL serial module..Power supply support up to four MPUIQ-SRL modules.Package includes: IEC adapter and four output cables.Black

Cisco offers an industry-leading portfolio of technology innovations. With networking, security, collaboration, cloud management, and more, we help to securely connect industries and communities..715W redundant power supply with hot-plug capability for Cisco network hardware.Input voltage: 100-240VAC.Energy efficiency rating: 80 PLUS Platinum.Comes in black and silver colors.Meets or exceeds the CISPR 22 Class A, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, AS/NZ 3548 Class A, CCC, ICES-003 Class A, EN 61000-4-5, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15 A, CSA C22.2 No. 60950-1, BSMI Class A, VCCI Class A, and EN 300 386 standards

STARTECH.COM® 5-15 8 Outlet 15 A 120 V Power Distribution Unit delivers a cost-effective power distribution solution for your server rack/cabinet. The 1U PDU can be mounted horizontally in any server rack 19 in depth or greater, to provide eight 120V 15A power ports/outlets, and features a rugged steel casing to ensure maximum durability. The front of the PDU features two LEDs to indicate proper ground and surge detection while enabling you to control the power state with an illuminated power/reset switch. To prevent costly breakdowns of connected devices, the rackmount PDU features a built-in circuit breaker and reset switch, ensuring dependable performance of vital equipment..6 ft 15 A 120 V input.120 V 60 Hz output.8 NEMA 5-15 outlet connector.1U rack mount.Package includes 1 - 8 port power distribution unit, 1 - installation document.Maximum 15 A total current draw per phase.Solid steel chassis for durability.LED indicators for ground and surge detection.Illuminated reset and power switch.Meets ANSI/EIA RS-310-D standards.Built in circuit breaker.Indicator type (led): 1 - ground, 1 - surge.Regulatory derated input current (north America): 12 A.Applications: 16 easily accessible power outlets in a compact 1U of rack space, Localize the power control for all of your connected system.Certification: RoHS compliant, UL listed.4.5 lbs.1.7"(H) x 19"(W) x 3.8"(D).2 years warranty.STARTECH.COM® 5-15 8 Outlet 15 A 120 V Power Distribution Unit is made of rugged steel casing, and built in circuit breaker to ensure maximum durability.

125W config 5 power supply for Catalyst 9200 switch series.Autoranging unit supports input voltages between 100 and 240 VAC.Output voltage range is 12 to 12.5V

48 V DC Output Voltage.DIN Rail.94% Efficiency

The Transition Networks® SPS-UA12DHT-NA industrial power supply is perfect for unmanaged switch. It has an input voltage rating of 110 - 220 VAC, output voltage rating of 12 VDC and output current of 1.5 A..Industrial power supply for unmanaged Switch.Suitable for use with Transition Networks SISTF1010-150-LR(T) industrial unmanaged switch.Comes in black color.Power supply: Input: 90 - 264 VAC 50 - 60 Hz, 0.45 A at 115 VAC, 50 A at 100/240 VAC (inrush), Output: 12 VDC (11.4 - 12.6 VDC), 1.3 A, 18 W.Offers protection against short circuit, overload, over voltage and overheating.Temperature: -0 - 70 deg C operating, -40 - 75 deg C storage, Humidity: 10 - 95 percent non-condensing.RoHS Compliant.Comes with lifetime warranty

The CyberPower PDU41001, an 8-outlet (front), 1U rackmount switched power distribution unit (PDU), provides 120V 15A output. It distributes power to eight NEMA 5-15R receptacles from a single NEMA 5-15P plug with unfiltered electrical pass-through. The switched outlet receptacles can be managed individually or collectively over the network, using the CyberPower Management Console, a web browser, and the RJ45 Ethernet port for network connection, or locally by using the LCD controls..Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Nominal input voltage 100-120VAC.Provides 100-120V 15A output.Dimensions: 1.75"H x 17.05"W x 4.41"D.Single NEMA 5-15P plug with unfiltered electrical pass-through.Distributes power to eight NEMA 5-15R receptacles.Provides local and remote control for individual and multiple outlets.Allows for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Included: four mounting brackets (two short and two long), 10 flat head M4x8 bracket mounting screws, cord retention tray, 10 cable ties, 6 M3x6 cord retention tray mounting screws, six M5x12 screws, six washers, RJ45/DB9 serial port connection cable, user manual, registration card, CD.3-year manufacturer limited warranty

Fluke Networks Power Adapter 30 Watt United States.Input Voltage: 120 V AC.Output Voltage: 15 V DC.Maximum Output Power: 30 W

This 1U rackmount power distribution unit (PDU) provides unfiltered power distribution to 10 NEMA 5-15 receptacles from a UPS system, generator, or utility power source. Designed for electrically demanding IT or industrial environments, the CPS1215RM has durable metal housing and network-grade plugs and outlets. A 15-foot AC power cord allows the PDU to be placed where it's needed and a cord retention tray secures power cords, keeping them organized and accessible. The CPS1215RM Basic PDU also comes with a three-year warranty..Rack Mountable (1U) PDU that delivers AC power to servers, equipment, and connected devices..Input voltage: 120 VAC, 50Hz/60Hz.Power capacity: 1.8 kVA, 15-Amp electrical capacity with circuit breaker.Product Dimensions are 17.25"W x 1.75"H x 4.75"D with a Cord Length of 15 ft (4.5 m)..This PDU has a Nominal Input Voltage of 100 VAC - 125 VAC and uses an input plug type NEMA 5-15P..Output voltage: 120 VAC (60 Hz)Plug/connector type: NEMA 5 15P straight, Receptacles: 10 x NEMA 5 15R (Output).Meets or exceeds UL & RoHS.Provides shielding against electromagnetic interference & radio frequency signals. Most commonly, this is used to prevent line noise or humming that occurs over telephone lines or stereo electronics.Warranty: 3 Year Limited Warranty.Compatibility: PC.Certifications and standards: UL, RoHS.Includes: CPS 1215RM unit, warranty card/manual.Weight: 4.90 lbs..Deliver reliable power to multiple devices with the CPS1215RM Basic PDU from CyberPower, your trusted ally in power.

HP® 1100W PoE+ zl2 Power supply measuring 5.1" x 7.5" x 6.3" is designed to produce an instant power conveniently. Power supply has a input voltage of 120/230 VAC and operates at frequency between 50 - 60 Hz..Dimensions: 5.1"(H) x 7.5"(W) x 6.3"(D).Compatibility: HP 5400R zl2 switch series.Output power: 1100 W.Input voltage: 120/230 V AC, input voltage range: 115/240 V AC.Current: 6.8 A.Frequency: 50 - 60 Hz.Certifications & standards: Green compliant: Yes, Green compliance certificate/authority: REACH.Weight: 2.74 kg.Warranty: Lifetime limited.HP® PoE+ zl2 Power supply is compatible to use with HP 5400R series switch and produces a output power of 1100 W.

A rack/tower UPS with line interactive topology, the CyberPower PFC Sinewave OR2200PFCRT2U provides power protection (using sine wave output) and surge protection for department servers, workgroup servers, network devices, telecom appliances, and high-end audio/video equipment requiring active PFC power source compatibility. The OR2200PFCRT2U uses Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, which extends battery life. AVR is essential in areas where power fluctuations occur frequently..Line-interactive UPS protects electronic equipment with 8 outlets for seamless connectivity.Power Capacity: 2000VA; Output Power Capacity: 1540 W.Surge energy rating: 1470 Joules.Provides USB connectivity for maximum flexibility.9.84' cord allows you to set up your system at a comfortable distance.Charge time: 10 hours.Output voltage of 120 VAC to ensure adequate power supply.External form makes it convenient to install and use.Lead acid battery ensures efficient performance.Meets or exceeds UL, ISO 9001, cUL, FCC Class B, RoHS, and UL 1778 standards.Dimensions: 3.5"H x 17"W x 15.3"D.3-year manufacturer limited warranty

Power supply for Poly Trio C60 smart conference phone..Power Supply with power cord and CAT-5 cable.Includes 100-240V, 1.0A, 55V/30W, IEEE 802.3at compliant mid-span power injector for 10/100/1000 Mbps Ethernet..6' Power cord & 7' Ethernet cable.Black.What's In The Box: Poly Trio C60 Power Kit (Poly 2200-86680-001 or HP 85X030AA#ABA)A/C Power kit for Poly Trio C60 Conference phone.6ft power cord,7ft Ethernet cable.Poly Trio C60 Power Supply with Power Cord and CAT5 (85X03AA) - VoIP - IEEE 802.11a/b/g/n/ac - 2 x Network (RJ-45) - PoE Ports

Power Cisco Business Wireless 100/200 series access points and other PoE devices with the CB-PWRINJ-NA 15.4W Single-Port PoE Injector. This unit will support devices that require up to 15.4W of PoE up to 328' away. It complies with the IEEE 802.3af standard and supports 1000 Mb/s passthrough data rates..Watts, Power Supply & Use: Delivers 15.4W PoE, Single-Port PoE Injector.Complies with IEEE 802.3af.Input Voltage: 90 to 264 VAC, 50 / 60 Hz.True Color: Black.Warranty: 1 Year.Power Cisco Business Wireless 100/200 series access points and other PoE devices with the CB-PWRINJ-NA 15.4W Single-Port PoE Injector.

The Netgear® ProSafe® APS1000W auxiliary power supply module delivers 1000 W of power to M6100 chassis switches. With C15 connector, this module is compatible with RPS4000 external RPS/EPS unit..Dimensions: 1.5"H x 3.4"W x 8.2"D.Suitable with M6100 chassis switches, RPS4000 and RPS4000v2 external RPS/EPS units.Comes in silver color.Power supply: 110 - 240 VAC, 1000 W.Form factor: Plug-in module

Cisco™ Power module requires input voltage of 110/220 VAC by providing 54 VDC of output voltage. Power module is adaptable with Cisco™ industrial ethernet 3000 series switches..Cisco Industrial Ethernet 3000 Series Switches.Form factor: DIN-rail mount.Power consumption: Input voltage: 110 - 220 VAC, input voltage range: 88 - 300 VDC, 110 - 220 VAC, output voltage: 54 VDC, frequency: 50/60 Hz, current: 1.2 A.Compatibility: Cisco Industrial Ethernet 3000 series switches.Cisco™ Power module is compatible with Cisco™ industrial ethernet 3000 series switches and requires input voltage of 110/220 VAC by providing 54 VDC of output voltage.

The Cisco Catalyst 9200 switch chassis has two power supply slots that operates with either one active power supply module and a redundant power supply module. You can use two AC modules or one AC module and a blank cover. The active and redundant modules must be of the same type. All power supply modules have internal fans. All switches ship with a blank cover in the second power supply slot. The main module is field replaceable and the redundant module is hot-swappable. The redundant power supply can also be used for extra PoE power..1000W AC power supply module for switch.Compatible with Catalyst 9200 series switches.Supports input voltages between 100 and 240VAC.Features a power cord (18-AWG) for connection to an AC power outlet

Cisco offers an industry-leading portfolio of technology innovations. With networking, security, collaboration, cloud management, and more, we help to securely connect industries and communities..350W redundant power supply with hot-plug capability for Cisco network hardware.Input voltage: 100-240VAC.Energy efficiency rating: 80 PLUS Platinum.Comes in black and silver colors

HP® Power supply has input voltage rating of 120/230 V AC and current rating of 8.5 Amps. Unit measuring 5.1" x 7.5" x 6.3" is compatible with HP 5400R zl2 switch series..Dimensions: 5.1"(H) x 7.5"(W) x 6.3"(D).Compatibility: HP 5400R zl2 switch series.Output power: 700 W.Input voltage: 120/230 V AC, Input voltage range: 110/240 V AC.Current: 8.5 A.Frequency: 50 - 60 Hz.Certifications & standards: Green compliant: Yes, Green compliance certificate/authority: REACH, WEEE.Weight: 2.44 kg.Warranty: Lifetime limited.HP® Power supply is standard PoE+ power supply for 5400R zl2 switch series, providing up to 700 watts.

The Cisco Catalyst 125W Internal Power Supply (PWR‑C6‑125WAC=) delivers reliable, energy‑efficient performance for Cisco Catalyst 9200 Series switches, making it an essential upgrade or replacement for demanding enterprise networks. Designed as a hot‑plug, redundant AC power module, it supports an input range of 100–240VAC, 50–60Hz and outputs 12VDC at 10.5A, ensuring consistent power delivery even during load fluctuations. This 125W internal power supply meets a wide range of global safety and EMC standards—including FCC Part 15 Class A, EN 55032 Class A, CISPR 32 Class A, UL 60950‑1, CE, and more—providing dependable compliance for professional installations. With a compact and lightweight design (1.58"H x 4"W x 7.6"D; 1.5 lbs.) and an IEC 320‑C14 input connector, it offers easy integration into existing hardware environments. The module delivers a total output of 426.5 Btu/h and ensures dependable power continuity with a 20 ms minimum holdup time at 100VAC. Fully compatible with Cisco Catalyst C9200‑24T and C9200‑48T switches, this power supply is engineered to maximize uptime, stability, and long‑term performance across modern enterprise networks..Internal 125W power supply for Cisco Catalyst 9200 series switches.Input voltage: 100-240VAC, 50-60Hz, 1.6-0.7A.Meets or exceeds the FCC Part 15 (CFR 47) Class A, ICES-003 Class A, EN 55032 Class A, CISPR 32 Class A, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, CISPR 35, EN 55035, EN300 386, EN 61000-3-2, EN 61000-3-3, UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, CCC, CE standards.Output voltage: 12VDC, 10.5A.Output holdup time: 20ms minimum at 100VAC.Input connectors: IEC 320-C14 (IEC60320-C14).Total output: 426.5 Btu/h.Compatible with Cisco Catalyst C9200-24T, C9200-48T switches.Product dimensions: 1.58"H x 4"W x 7.6"D.Product weight: 1.5 lbs.

The Cisco™ N2200-PAC-400W-B= AC power module provides back-to-front airflow. It has an input power rating of 110 - 220 VAC and output power rating of 400 W. This power module is suitable for use with Cisco Nexus 2200 platform chassis..Power module is ideal for Nexus 2200 platform chassis.Suitable for use with Cisco Nexus 2200 platform chassis.Power supply: Input: 110/220 VAC, Power: 400 W.Form factor: Plug-in module.RoHS Compliant.Weight: 2.2 lbs.

Tripp Lite™ Power distribution unit has a input/output voltage rating of 120 V and features switch free design. Power distribution unit is rack mountable and suitable for network power distribution in datacenters, computer rooms and network closets..Single phase NEMA 5-20P, NEMA L5-20P 4.57m 20A 120VAC input.50/60 Hz frequency.Outlet connector: 14 x NEMA 5-15R, NEMA 5-20R.Black.Cord length: 15'.Output voltage: 120 V, Overload protection: 20 A.Maximum input current: 20 A, PDU input voltage 100, 120, 127 V, Voltage compatibility: 120 VAC, Power rating: 2.40 kVA.Dimensions: 36"(H) x 1.75"(W) x 1.25"(D).Style: Vertical rackmount, wallmount, raceway, workbench, Form factor supported: Vertical (0U) mounting in rack enclosures, horizontal mount in raceways and a variety of other applications.Switch free design prevents accidental shutoff, rear facing installation buttons can be relocated to the left or right surface of the PDU for rear, center or forward-facing outlet orientation in compatible racks.Toolless mounting buttons enable simple installation in Tripp Lite and other button-mount compatible equipment racks.Ideal for network power distribution in datacenters, comptuer rooms and network closets, Supplies equipment with continuous power from any protected UPS, generator or mains input power source.Package contents: PDUV20 basic vertical PDU, mounting hardware, owner's manual with warranty information.Certifications and standards: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.Weight: 4 lbs..Warranty: 5 years limited.Basic single phase 20A 0U vertical rackmount power distribution unit supplies equipment With continuous power from any protected UPS, generator or mains input power source.

Liebert® PDU has four NEMA 5-20R and four NEMA L6-30R output receptacles and weighs around 6.60 lbs. PDU has hardwire terminal block 3W + G input receptacle..Load capacity: 10 kVA.Current: 60 A.Input receptacles: Hardwire terminal block 3W + G, output receptacles: 4 x NEMA 5-20R, 2 x power NEMA L6-30.Dimensions: 5.7"(H) x 7.4"(W).Compatibility: Liebert UPS systems: GXT3-8000RT208, GXT3-10000RT208.Built-in maintenance bypass.Weight: 6.6 lbs..Liebert® PDU comes with 8 outlets, current rating of 60 A and has dimensions of 20.2" x 12" x 8.6".

AC power supply for the EX4650 switch are fully redundant, load-sharing, and hot-removable and hot-insertable FRU..650W power supply for EX4650 switch.Input voltage: 100 VAC to 240 VAC.The power supply module cooled by its own internal cooling system.Comes in gray.Each inlet requires a dedicated AC power feed and a dedicated customer-site circuit breaker.Minimum 20 A (110 VAC) or 16 A (220 VAC) customer-site circuit breaker recommended, or as required by local code.A fan present in the power supply module monitors and maintains the temperature inside.A detachable AC power cord is supplied with the AC power supplies.PSU features front-to-back airflow (AFO).AC power supply consists of a handle, an ejector lever, an AC appliance inlet, a fan, and status LEDs to monitor the status of the power supply.1-year manufacturer limited warranty

The CP1500PFCRM2U features Automatic Voltage Regulation (AVR), which corrects minor power fluctuations without switching to battery power, and a multifunction control panel with a color LCD to quickly confirm status and alerts at-a-glance. Remote management and/or monitoring is available with optional purchase of a Remote Network Management Card or Cloud Monitoring Card. At only 10.5 inches in depth, the CP1500PFCRM2U fits comfortably in short-depth rack installations where space is at a premium..Capacity: 1500VA / 1000W.Topology: Line Interactive.Waveform: Sine Wave.Runtime (half/full): 10.2 minutes / 3.1 minutes.Outlets: 8 surge + battery backup.Short depth rackmount.Automatic voltage regulation

TRIPP LITE IEC-C13/IEC-C19 12/2 Outlet 16 A 100 - 240 V Basic Power Distribution Unit offers reliable Rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure Rackmount installation with included mounting accessories..Single phase NEMA 5-15/20P / NEMA L5-20P / NEMA L6-20P / IEC-320 C14/C20 10 ft 16 A 100 - 240 V input.100 - 240 V 50/60 Hz output.12 IEC-C13, 2 IEC-C19 outlet connector.16 A overload protection.1U horizontal rack mount.Package includes 1U rack mount PDU, 1U rack mount PDU, Set of 5 plug adapters, user manual with warranty information.Back panel grounding lug.14 outlets (4 C13 front-facing/2 C19 and 8 C13 rear-facing).Rack mount, vertical rack mount, wall mount/under-counter style.Form factors supported: 1U rack mount, 0U vertical mount, wall mount and under-counter mounting supported.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Typical applications: Ideal for network power distribution in datacenters, computer rooms and network closets.Pack of 5 included C19 adapters with locking retainer clip enables plug conversion to C14 (connects to C13 100-240V), L6-20P (connects to L6-20R 20A 208/240V), L5-20P (connects to L5-20R 20A 120V), 5-20P (connects to 5-20R 20A 120V) and 5-15P (connects to.Outlets center to center measurement: Distance between front (C13) outlets = 28.75mm, distance between rear (C19) outlets = 55mm, distance between rear (C13) outlets = 28.75mm.Certifications: Tested to UL60950-1 (USA), CSA (Canada), CE (EU).3.2 lbs.1 3/4"(H) x 17 1/2"(W) x 4 1/4"(D).Lifetime limited warranty.Space saving, ultra-compact housing with support for wall-mount, desktop or floor placement; built-in grounding lug.6' power cord; USB cable included.TRIPP LITE IEC-C13/IEC-C19 12/2 Outlet 16 A 100 - 240 V Basic Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display.

The CyberPower CP1000PFCLCD PFC Sinewave UPS provides battery backup, power protection, and surge protection for desktop computers, workstations, networking devices, and home entertainment systems..Battery Backup - Supplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown..Surge Protection - Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage..Data Line Protection - Prevents power surges that travel through telephone, coaxial, and Ethernet lines from causing damage to electronics..Line Interactive Topology - Exists when a line interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery..Automatic Voltage Regulation (AVR) - Provides clean, consistent AC power by automatically increasing (boosting) low voltage without using battery power when incoming utility power experiences minor fluctuations..Sine Wave Output - Provides power protection to ENERGY STAR® 6.0 systems with Active PFC power supplies..GreenPower UPS™ Bypass Design - Is a patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup..Multifunction LCD Panel - Displays immediate, detailed information on the UPS battery and power conditions, alerting users to potential problems before they can affect critical equipment and cause downtime..ENERGY STAR - This model is an ENERGY STAR® Qualified Uninterruptible Power Supply (UPS) system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment..The CyberPower CP1000PFCLCD PFC Sinewave UPS provides power protection for your computers, workstations, department servers, networking hardware, and A/V equipment.

The APC® Zero U AP8962 5.76 kVA switched rack power distribution unit in black, is perfect for APC NetShelter SX enclosure with sides. It supplies power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. It has an input voltage rating of 208 V 3PH and output voltage rating of 120 V at 60 Hz. It uses NEMA L21-20P input, 24 x NEMA 5-20R output connectors. It includes rack mounting brackets, serial cable and installation guide..Power distribution unit provides remote monitoring and control capabilities.Dimensions: 70.5"H x 2.18"W x 1.72"D.Comes in black color.Compatible with APC NetShelter SX enclosure with sides.Load capacity: 5.76 kVA.Input voltage: 208 V 3PH at 50/60 Hz.Output voltage: 120 V.Input current: 20 A.Connectors: NEMA L21-20P input, 24 x NEMA 5-20R output.Form factor: Zero U rack-mountable.Cord length: 6'.Overload protection.Operating temperature: 23 to 113 deg F ( -5 to 45 deg C ).Includes rack mounting brackets, serial cable, installation guide.Meets cUL, FCC Part 15 Class A, ICES-003, UL 60950-1, UL standards

This mini-tower uninterruptible power supply (UPS) provides battery backup power (using sine wave output) and surge protection for connected equipment including computers, networking devices, personal electronics, and entertainment systems. Sine wave output is necessary for devices that require Active Power Factor Correction (Active PFC) power source compatibility. Additional features include automatic voltage regulation (AVR) to correct minor fluctuations without switching to battery mode, a multifunction LCD with color display to keep you informed about power conditions, and two USB charging ports to conveniently charge and power mobile devices. The PFC Sinewave CP1500PFCLCD comes with a three-year warranty (including coverage of batteries) and a $500,000 lifetime connected equipment guarantee..Surge energy rating: 1445 joules.Equipped with 12 surge-protected outlets for seamless connectivity (6 battery-connected).Product Dimensions are 3.9"W x 11"H x 14.0"D with a Cord Length of 5 ft (1.5 m)..Multifunction LCD Panel - Displays immediate, detailed information on the UPS battery and power conditions, alerting users to potential problems before they can affect critical equipment and cause downtime..This UPS has a Runtime of 2.5 min at Full Load and a Runtime of 10 min at Half Load. The Nominal Input Voltage is 120 VAC using an input plug type NEMA 5-15P..Meets or exceeds UL1778, cUL 107.3, FCC DOC Class B, RoHS, ENERGY STAR standards.UPS protects electronic equipment and prevents data loss during a power outage.Featuring serial and USB interfaces for communication and management, this UPS provides surge protection and filtering for RJ11/RJ45 (in/out combo) ports and coax lines (in/out).Automatic Voltage Regulation (AVR) - Provides clean, consistent AC power by automatically increasing (boosting) low voltage without using battery power when incoming utility power experiences minor fluctuations..Line Interactive Topology - Exists when a line interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery..Warranty: 3 Year Limited Warranty.a href="http://sds.staples.com/msds/2719076.pdf" target="_blank"Safety Data Sheet/a.Keep valuable electronics safe and prevent data loss during utility power problems with the PFC Sinewave CP1500PFCLCD from CyberPower, your trusted ally in power.

369c974d559b0e9a66354fd4cf16afb7.1.9kW 120V single-phase switched 0U PDU.24 individually controllable NEMA 5-15/20R outlets.Built-in LX Platform interface for 24/7 remote access.Digital ammeter for on-site load monitoring in real time.NEMA L5-20P input with 10 ft. AC power cord and 5-20P adapter

Cisco PWR-IE50W-AC Expansion power module has AC input voltage rating of 100 - 240 V at 1.25 A, DC input voltage rating of 125 - 250 V at 1 A and DC output voltage rating of 24 V at 2.1 A. Offers easy and convenient installation on DIN-rails. Perfect choice for use with PWR-IE3000-AC switches..Power System for IE-3000-4TC and IE-3000-8TC Switches.Measures 5.8" x 2" x 4.4".Compatible with Cisco PWR-IE3000-AC power converter, Cisco switches: IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E, IE-3000-8TC-E.Can be DIN rail mountable for easy installation.Has 1 x IEC 60320 C14 design provides maximum durability and excellent signal transmission.Frequency: 50 Hz Input, 60 Hz Input.Cisco Expansion power module is perfect choice for E-3000-4TC, IE-3000-8TC, IE-3000-4TC-E and IE-3000-8TC-E switches. Suitable for data networking and optical network applications.

Tripp Lite Single phase basic power distribution unit has NEMA L6-30P enclosure to offer added protection and can be 1U/0U vertical rack mounted. Unit has NEMA 5-15R outlet connector and offers 15 A overload protection..Single phase NEMA L6-30P 15' 30 A 208 - 240 V input.208 - 240 V 50/60 Hz output.Outlet connector: 16 IEC-C13, 4 IEC-C19.Overload protection: 30 A.1U/0U vertical rack mount.Package includes: PDU1230 power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel nut and bolt grounding lug.Reversible housing; 5.2'' depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Certifications: Tested to UL60950-1 (USA), CSA-C22.2 (canada).Dimensions: 1.75"(H) x 17.50"(W) x 5.20"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

A rack/tower UPS with line interactive topology, the CyberPower Smart App LCD CPS1500AVR provides battery backup (using simulated sine wave output) and surge protection for department servers, workgroup servers, workstations, network devices, and telecom installations without active PFC power supplies. The CPS1500AVR uses Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, which extends battery life. AVR is essential in areas where power fluctuations occur frequently..Input voltage: 85 - 150 VAC.Output voltage: 120 VAC +/-5% (60 Hz).Power capacity: 1.5 kVA.Plug/connector type: NEMA 5 15P right angle, Receptacles: 6 x NEMA 5 15R - battery/surge protected.Battery information: Maintenance-free sealed lead acid user replaceable hot-swappable, Backup/run time: 0.10 hours 950 W full load, 0.30 hours 475 W half load, 3 to 6 year life, Battery recharge time: 8 hours, Battery size: 12V/7AH.Form factor: 2U tower/rack mountable.Cord length: 10', Color: Black.LED indicators: Power on, using battery, AVR, wiring fault, load level, battery level, Audible alarms: On battery, low battery, overload, Data line protection: RJ-11 (1-In, 1-Out (Combo)) Telephone/Fax/Modem/Internet Line, RJ-45 10/100Base-TX.Surge energy rating: 1800 J.Plug N Play software and convenient USB ports allow for quick and easy installation.Provides shielding against electromagnetic interference & radio frequency signals. Most commonly, this is used to prevent line noise or humming that occurs over telephone lines or stereo electronics.Incoming AC power is electronically regulated for dips and spikes AVR takes this irregular AC power and converts it into a consistent Sinewave so sensitive electronic equipment can achieve its optimal performance.EMI / RFI filtering, simulated sine wave, 15 A circuit breaker, automatic voltage regulation, RM/T configuration, metal housing, LED indicators, audible alarms, 36, 000 Amps surge current, SNMP / HTTP remote monitoring.Operating temperature: 32 - 95 deg F, 5 - 113 deg F (Non operating), Operating humidity: 0 - 95% non condensing, 0 - 95% non condensing (Non operating), Altitude: 0 - 10000 ft operating, 0 - 50000 ft. non operating.Compatibility: PowerPanel power management software Windows 8 32/64, Windows 7 32/64, Vista 32/64, XP 32/64, 2000, 2003, Server 2008 and Server 2012.Certifications and standards: FCC Class B certified, cUL, UL 1778, RoHS.Included: Smart app AVR CPS1500AVR 1500 VA UPS, rack mount kit, user manual, power management software, warranty card, serial cable, serial to USB adapter.Weight: 57.50 lbs..Warranty: 3 years limited

The APC® AP6002A basic rack power distribution unit with 16-outlet has a voltage rating of 200-240 V AC..Basic rack power distribution unit offers a range of basic and metered PDUs for any application.Dimensions: 32.81"H x 2.19"W x 1.85"D.Input connection: NEMA L6-30P cord, output connections: (14) IEC 60320 C13 and (2) IEC 60320 C19.Maximum input current (phase): 30 A (24 A UL/C-UL derated), input frequency: 50/60 Hz.Maximum output current: C19, 16 A, C13, 12 A (UL/CUL derated) C19, 20 A, C13, 15 A (PSE) (outlet), 30 A (24 A UL/C-UL derated) (phase).Acceptable input voltage: 200-240 VAC +6% to -10%, output voltage: 200-240 VAC +6% to -10%.Overcurrent protection (internal): (2) 20 A, 2-pole breakers.Distributes power to devices in the rack.Cord length: 10'.Maximum elevation (above MSL): Operating: 0 to 3048 m.Temperature: Operating: 0 to 50 deg C, storage: -15 to 60 deg C, humidity: Operating/storage: 5 to 95%, non-condensing.Includes NEMA L6-30P cord.Meets Safety approvals: UL/C-UL, ROHS: 2011/65/EU-latest revision standards.Weight: 8.49 lbs.

The HPE Aruba Networking X372 54VDC 1050W 110-240VAC Power Supply (JL087A#B2C) is a high-performance, hot-pluggable, and redundant power supply unit designed to enhance the reliability and efficiency of HPE Aruba networking devices. It delivers a robust power capacity of 1050 watts, with up to 740 watts specifically allocated for Power over Ethernet (PoE) applications, ensuring seamless operation for PoE-enabled network switches. Engineered for flexibility, it supports an input voltage range of 110-240V AC and outputs a stable 54V DC, making it ideal for enterprise networking environments. The compact design, measuring 3.27 x 8.88 x 1.58 inches and weighing only 1.94 lbs., allows for easy installation and compatibility with Aruba 2930M, 3810M, and 6300M Series switches. This power supply is optimized for energy efficiency while ensuring uninterrupted network performance, making it a reliable solution for organizations that demand high-power networking infrastructure..The HPE Aruba Networking X372 54VDC 1050W Power Supply is a hot-pluggable, redundant power supply designed to provide reliable power for Aruba network switches, ensuring efficient operation and Power over Ethernet (PoE) capabilities..Designed for seamless integration with Aruba 2930M, 3810M, and 6300M Series switches, ensuring optimal performance and compatibility with PoE-enabled network infrastructures..Compact and space-efficient, measuring 3.27 x 8.88 x 1.58 inches (8.31 x 22.56 x 4.01 cm), making it easy to install within compatible Aruba networking devices..Features a sleek silver and black finish with durable metal housing, providing robust protection and heat dissipation for long-lasting performance..Sold individually as a single-unit power supply (1 Each), ensuring customers receive a reliable and complete power solution for their networking needs.

Aruba X372 features a 1600 watt power supply for applicable PoE switches. Offers up to 1440 watts of PoE power, and is keyed so that it will not fit into the power supply slots of non-PoE Aruba switches..Switch power supply unit.Dimensions: 1.6"H x 3.3"W x 8.9"D.Will not fit into the power supply slots of non-PoE switches.Compatible with Aruba 6300M PoE switches (JL659A, JL660A, JL661A, JL662A).Input voltage: 110-120VAC, 208-240VAC.Output voltage: 54VDC.Output power: 1600W.Frequency range: 50-60Hz

APC® Basic power distribution unit featuring rack mounting brackets can be 1U horizontal rack mounted and offers overload protection up to 24 A. Unit has input voltage rating of 200 - 230 V and input current rating of 16 A..IEC-320 C20 8.2' 16 A 200 - 230 V input.120 - 230 V 50/60 Hz output.Outlet connector: 10 IEC 320 C13, 2 IEC 320 C19.1U horizontal rack mount.Includes: Rack mounting brackets, user manual.Puts power where it is needed most-in the racks near the equipment.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: CE, GOST, VDE, Victoria, RoHS complaint.Weight: 9 lbs..Dimensions: 1 3/4"(H) x 17.60"(W) x 2 1/4"(D).2 years limited Mrf. warranty.APC® AP9559 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

Cisco™ AIR-PWRINJ6= 100 Mbps Power PoE Injector for Aironet 1810 Series Access Point.PoE injector is ideal to use with access points.Dimensions: 1.28"H x 2.09"W x 5.5"D.Compatible with Cisco Aironet 2800 series and 3800 series access points.Connectors: RJ-45, EIA 568A and 568B.Data transfer rate: 10/100/100 Mbps.Power: 30 W (user port), 100 - 240 VAC, 0.67 A, 50 - 60 Hz (input), 55 VDC (output).Reliability: MTBF 100000 hrs at 25 deg C.Thermal rating: 20 BTU/Hr at 240 VAC.Temperature: -4 to 104 deg F (operating), 4 to 158 deg F (storage), 90 % relative humidity.Meets China RoHS, IEEE 802.3, WEEE, CE, FCC, VCCI, UL, IEC/EN certifications and standards.Weight: 0.44 lbs..100 Mbps PoE injector provides up to 30 W and is compliant with IEEE 802.3af systems, for use with the Cisco Aironet 2800 series and 3800 series access points.

A mini-tower UPS with line interactive topology, the CyberPower PFC Sinewave CP850PFCLCD provides battery backup (using sine wave output) and surge protection for desktop computers, workstations, networking devices, and home entertainment systems requiring active PFC power source compatibility. The CP850PFCLCD features an advanced multifunction control panel with a color LCD to quickly confirm status and alerts at-a-glance. The screen tilts for easy viewing when the UPS is placed in a low position such as under a desk. The CP850PFCLCD uses Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, which extends battery life. AVR is essential in areas where power fluctuations occur frequently. The CP850PFCLCD comes with a three-year warranty (including coverage of batteries) and a $250,000 Connected Equipment Guarantee..Line-interactive UPS protects electronic equipment with 10 outlets for seamless connectivity.Power Capacity: 850VA; Output Power Capacity: 510 W.Surge energy rating: 1150 Joules.Provides USB connectivity for maximum flexibility.6.56' cord allows you to set up your system at a comfortable distance.Charge time: 8 hours.Output voltage of 120 VAC to ensure adequate power supply.External form makes it convenient to install and use.Lead acid battery ensures efficient performance.Meets or exceeds UL 1778, FCC Class B, cUL 107.3, and RoHS standards.Dimensions: 9.7"H x 3.9"W x 10.2"D.3-year manufacturer limited warranty

Tripp Lite Switched PDU offers advanced network control and monitoring with the ability to turn on and off. PDU features 16 switched outlets that can be controlled in real-time to remotely reboot unresponsive network hardware..Input voltage: 120 VAC.Output voltage: 120 VAC.Supports power-on, power-off or reboot of each outlet on a real-time or programmable basis.PDU type: Switched.Frequency: 50/60 Hz.Input receptacles: NEMA 5-15P.Output receptacles: 16 x NEMA 5-15R.Form factor: Horizontal rackmount, vertical rackmount.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 15 1/2"(D).Appearance: Black 1U rackmount steel chassis.Management protocols: HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP, BOOTP, NTP.Front panel LEDs: 16 LEDs display power on - off status for each outlet, digital current meter display shows total output power consumption in amps.Includes: Switched PDUMH15NET 16-outlets PDU, installable 1U mounting brackets, PowerAlert software CD, cord retention Bbrackets, user manual.Certifications: Tested to UL 60950-1 (USA, Canada), class A (Emissions), NOM (Mexico), RoHS compliant.Weight: 12.5 lbs..Warranty: 2 years limited.Tripp Lite Switched PDU has input/output AC voltage of 120 V and maximum input current of 15 A operating at a frequency of 60 Hz and weighs around 12.5 lbs.

The HP® JL086A#ABA 680 W power supply has an input voltage rating of 120 - 230 VAC and output voltage rating of 54 VDC for constant power supply. It is perfect for selected Aruba switches..Power supply for selected Aruba switches.Dimensions: 1.6"H x 3.3"W x 8.9"D.Color: Silver.Form factor: Plug-in module.Power: 120 - 230 VAC (input), 54 VDC (output), 680 W.Weight: 1.82 lbs.

Tripp Lite Single phase basic power distribution unit can be 1U/0U vertical rack mounted. Unit has adjustable mounting brackets to offer easy installation..Single phase IEC-320 C20 16 A 100 - 240 V input.Input voltage: 100 - 240 V, frequency required: 50/60 Hz output.Outlet connector: 12 IEC C13, 2 IEC-C19.Overload protection: 16 A.1U/0U vertical rack mount.Package includes: PDU12IEC rackmount power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel grounding lug.Reversible housing; 4 1/4" depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Weight: 3.2 lbs..Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.