Network Repair Tools

The Fluke Networks NFC-SWABS-2.5mm - SC, ST port cleaning swabs helps in cleaning all fiber connectors and eliminates the failure of fiber optic links. The 2.5 mm cleaning Swabs effectively removes the toughest contaminants in any fiber network..Polyester construction.Compatible with SC port, ST port, FC port fiber optic connectors.2.5 mm port cleaning swabs.Maximum Data Transfer Rate: 600Mbps.Warranty: 5 Years.Fluke Networks NFC Swabs are used for removing dirt dust and other contaminants from high-speed data transmission networks.

Fluke Networks® Compact Probe Pic with Cap, Yellow (44600000).Probe pic is perfect to check loose or damaged connections or to spread apart wires for direct access.Comes in yellow color and features high quality nylon construction for durability.Perfect for using the pic end for tracing or pulling wires from a bunch.Insulated tip protects against shorting adjacent components

Fluke Networks? Pro3000™ Analog probe is easy-to-use with adjustable volume control dial and "quick-twist" tip for easy replacement. Probe features recessed on/off button that helps prevent accidental turn on when placed in the pouch..Interfaces/ports: RJ-45.Tone and trace wire on non-active networks.SmartToneTM technology provides five distinct tones for exact pair identification.Sends loud tone up to 10 miles (16 kilometers) on most cables.Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures.Angled bed-of-nails clips allow easy access to individual pairs.RJ-11 connector is ideal for use on telephone jacks.Attach nylon pouch (included in kit) to your belt for easy transport.Battery: 9 V alkaline.Case dimensions: 2.7" x 2.4" x 1.4".Analog prob user interface: On/off pushbutton, volume dial, Replaceable tip, 3.5mm earphone jack.Solid Frequency: 1000 Hz nominal, alternating frequency: 1000/1500 Hz nominal, over voltage protection: 60 VDC in toner/polarity node.Output power in tone mode: 8 dB min to 600 Ohms.Output voltage level in continuity mode: 8 VDC with fresh battery.Fluke Networks® Pro3000™ Analog probe features a loud large speaker that amplifies the tone through walls, enclosure, wood or plaster and uses alkaline battery.

Quick Clean Cleaner 1. 25 mm Fiber, LC and MU, Single.For Fiber Optic

The Fluke Networks QuickClean-2.5-2.5mm Cleaner is used to clean SC, ST, FC and E2000 connectors with either UPC or APC polished ferrules. Unlike traditional swab cleaners that rely on the technique of the user, the Quick Clean Cleaners provide consistent cleaning every time. The user can easily engage the cleaner using a simple push motion and the user will hear a "click" sound when the process is completed. With the click of a button, any fiber installer or data center technician can clean up to 500+ fiber ports. These cleaners are designed to fit into pockets without contamination from dirt and grease..Quick Clean Cleaner 2. 5 mm Fiber - SC, ST, FC, E2000, 5 pack.For Fiber Optic - 5 Pack.Simple pushing motion to engage tool.Audible CLICK to alert the user when tool is fully engaged.Clean over 500 end faces per unit.Tip extender to 208mm for hard to reach connectors.Crush resistant to over 250N

This test set features the latest in test set technology. Designed with a superior, radiant liquid crystal display (LCD) user interface, it allows you to see what cannot be heard in any outside plant environment..Display type: LCD.Data lockout with data lockout override.Line and battery powered: Shares power from the telephone line and the 9 V internal battery, increasing the life of the battery.Replaceable heavy-duty braided cord and locking spring loaded belt clip.Low battery indication, volume control levels.Mute indication.Polarity indication.Tone and pulse dialing.Amplified speaker.Last number redial.Over voltage protection.Over current protection.High voltage lockout.PBX pause button, 2-way hands-free speakerphone for true hands-free conversation.Weight: 1.5 oz.Dimensions: 10"(H) x 3.8"(W) x 4.3"(D).Fluke Networks® 52801RJ9 LCD Test Set features backlit LCD and glow-in-the-dark keypad with ABN/PP and RJ11 Plug.

Fluke Networks® Test set features DTMF digit grabbing that isolates faulty customer premise equipment. Set has voltage indication/measurement that identifies potential line problems with data indication which warns when data is present on the line..Display type: Extra-large, backlit LCD screen.Two-way, hands-free speakerphone.Current range: 10 - 100 mA.AC impedance: Off-hook: 600 O nominal 300 - 3400 Hz, on-hook: greater-than120 kO, 300 - 3400 Hz, headset impedance: 32 ohm.Pulsing rate: 10 pps +/- 1 pps, Break/make ratio: 60/40, Interdigit interval: greater-than300 ms, Resistance during break: greater-than100 kOhm.Tone frequency error: +/- 1.5% maximum, Tone level: -3 dBm combined (typical), High versus low tone difference: 2 dB +/- 2 dB.Memory capacity: 9 speed dial memories of 23 digits, plus one last number redial memory, PBX pause duration:-user programmable, default of 4 seconds, hook flash duration:user programmable, default of 500 ms.Voltage range: 4 - 140 VDC.Current range: 0 - 100 mA.TDR range: 3000', Accuracy: +/-2 m, +/- 5 %.Frequencies: Steady tone: 950 Hz, Alternating tones: 950 Hz and 1480 Hz.Battery type: 9 V alkaline battery.Dimensions: 8.3" x 3.2" x 2.6".Detects dial tone, places and receives calls, polarity.Certifications and standards: ANSI/ISA 82.02.01 (61010-1) 2004, CAN/ CSA-C22.2 No. 61010-1-04, UL 61010-1 (2004) and IEC 61010-1:2010.Data indication warns when data is present on the line, voltage indication/measurement identifies potential line problems, caller-ID with call waiting verifies functional service, DTMF digit grabbing isolates faulty customer premise equipment.Fluke Networks® Test set is perfect for voice/data/video and communication service provider technicians and features caller ID with call waiting CID that verifies functional service.

The Fluke Networks® MS2-WM MicroScanner2 main wiremap adapter is compatible with Fluke Networks copper and fiber basic technician's kit. This adapter with RJ-45 female connector, is suitable for MicroScanner2 professional kit, MicroScanner2 termination test kit and MicroScanner2 cable verifier..Product Type: Network tester interface adapter.Manufacturer Warranty: 90 days warranty.Designed For: Fluke Networks Copper and Fiber Basic Technician's Kit; MicroScanner2 Cable Verifier, Professional Kit, Termination Test Kit.FLUKE networks® Microscanner has oversized display feature and operates with 2 AA alkaline batteries.

Signal interference from sources in the environment can make tracing cable a frustrating process. The Fluke Networks Pro3000 filtered probe blocks interference and "stops the buzz" by obstructing these signals allowing you to hear the tone you are tracing loud and clear. Probe's ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood, or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. Line cord features angled bed-of-nails clips and a rugged RJ11 plug for direct access to phone and data jacks without adapters. External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs. Use the SmartTone capability of the Pro3000 analog tone generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification up to 10 miles away..Filtered probe and tone generator kit for easy cable tracing.Probe dimensions: 1.6"H x 9.8"W x 1.3"D; tone generator dimensions: 1.4"H x 2.7"W x 2.4"D.Filtered probe comes in yellow and features a black replaceable tip; tone generator comes in blue.Innovative filtered probe obstructs signal of 60Hz and its harmonic frequencies.SmartTone technology provides five distinct tones for precise pair identification.Sends loud tone up to 10 miles on most cables.Slide switch selects continuity or tone mode.Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures.External switch allows for selection of solid or alternating tone options, indicated with solid or flashing LEDs.Supports headset via 3.5mm audio port for use in noisy environments.Angled bed-of-nails clips allow for easy access to individual pairs.RJ11 connector is perfect for use on telephone jacks.Supports switching between filtered and unfiltered modes with one button press.Utilizes an auto-off feature that deactivates the probe after five minutes to conserve battery life.Includes one spare tip.Frequency modes: 1000Hz nominal solid frequency and 1000/1500Hz nominal alternating frequency.Overvoltage protection: 60VDC in tone/polarity mode.Output power in tone mode: 8dBm into 600 ohms.Output voltage level in continuity mode: 8VDC with fresh battery.Both probe and tone generator require a 9V alkaline battery

Recognized as the industry standard for basic test sets, the ts30 test set provides superior quality at an affordable price. With its high impedance monitor for datasafe operation..Dimension: 2.8"(H) x 3.3"(W) x 10"(D).Material: Copper.Storage temperature: 40 - 150.8 deg F.Humidity range operating: 5 - 95%.Connectors: ABN clip.Technicians can clip onto a line in monitor mode without disrupting existing traffic.Fluke networks unsurpassed RainSafe™ protection standards and dropsafe durability assure the test set will keep working even in the toughest environments.Solid weatherproofing provides enhanced resistance to severe weather conditions.Automatic overcurrent protection, automatic overvoltage protection, last number redial, mute switch, rainsave.Tests, tools and measurements: Pulse, toning.Fluke Networks Device Tester - Withstands Rough Drops

The Wireview 2-6 is a cable identifier kit for Fluke Networks products.Cable testing and office identification accessory.Size: #2-6.Used for NTS2, ES, ES2 and OPV INA

HV Tools Punch Down Tool for Lan & Telecom 5 Pair UTP(24 AWG) both 110 Type Cable & Cross is a professional grade, high-volume Punch Down Cable Installation Tool, with adjustable impact, is the perfect multi-purpose tool for punching down Cat5/Cat6 cables. Each blade contains a cutting and non-cutting side. The blade not being used is stored in the handle compartment. Adjustable High/Low actuation setting accommodates termination requirements or installer preference..Punch Down Tool.2 x 4 x 9.professional grade, high-volume Punch Down Cable Installation Tool, with adjustable impact, is the perfect multi-purpose tool for punching down Cat5/Cat6 cables..Each blade contains a cutting and non-cutting side. The blade not being used is stored in the handle compartment..Adjustable High/Low actuation setting accommodates termination requirements or installer preference.

The TS19 Test Set combines all the essential test set features at a value price. The TS19 Test Set was specifically designed for in-house telecom technicians..Dimension: 3.4"(H) x 2.4"(W) x 8.8"(D).Material: Copper.Storage temperature: 40 deg F.Humidity range operating: 10 - 80% (non condensing).Connectors: ABN clip.Status Indicators: LED indicates polarity, the red LED lights if the red test lead is connected to the tip (positive) side and the black test lead is connected to the ring (negative) side.Device function: Open circuit testing, short circuit testing.Features such as Tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus ensuring the integrity of critical data lines.Weight: 10.8 oz..Fluke Networks TS19 Test Set - Ensure Your Data Lines Are Working

Tripp Lite N238-001-BL CAT-6/CAT-5e 110-Style Punch-down Keystone Jack (Blue).For use in CAT-6 or CAT-5E installations.Compliant with EIA/TIA CAT-6 connecting hardware specifications.Dual color coded labeling made for both 568A & 568B wiring schemes.Compact casing fits into any conventional face plate, outlet box or panel.Uniquely patterned, printed circuit board.Compliant with the Federal Trade Agreements Act (TAA) for GSA schedule purchases.Lifetime warranty.Blue.Includes N238-001-GN 110 style punch down keystone jack, 2 x termination caps.Compliant and standards: UL, ANSI/TIA/EIA-568-B.2-1, RoHS.Warranty: Lifetime limited

Fluke Networks® EverSharp™ 110/66 Cut blade is sharper that stays for longer period and offer better terminations at the block. Cut blade has a peculiar storage case that helps to eliminate the problem of losing and damaging by keeping in one place..Blades stay sharper longer due to the special processing of the metal and blade design.Connector type: 110, 66.Compatibility: Impact tool series D814, D914, D914S.Standard blades available for many block types including popular Krone and BIX.keep your blades organized and secure with our unique blade storage case.This unique blade storage case helps eliminate the problem of losing and damaging individual impact tool blades by keeping them together in one place.Compact size of the case makes it easy to carry in a pocket or clip onto a belt or tool pouch.Sharper blades provide better terminations at the block, leading to quality installs.Weight: 2.08 oz..Fluke Networks® EverSharp™ 110/66 Cut blade is a unique storage case that has a compact size and is kept in a well organized manner making it perfect to carry in a pocket or clip onto a belt.

HV Tools Professional Compression Tools for Fiber Cable is a universal Compression/Crimping Tool. It is pre-calibrated and easy to use compatible with almost all connectors, e.g. PPC, Digicon, Gilbert, Holland, Thomas and Betts Snap and Seal, Ultrease, Stirling, Lock and Seal, etc. Perfect for Satellite TV, CATV, Home Theater, and Security..Professional Compression Tools.2 x 5 x 12.Works with RG-6, RG-59, RG-58, BNC, RCA compression connectors.It is pre-calibrated and easy to use compatible with almost all connectors, e.g. PPC, Digicon, Gilbert, Holland, Thomas and Betts Snap and Seal.Perfect for Satellite TV, CATV, Home Theater, and Security.

The Fluke Networks™ FiberInspector™ FI-500 micro inspection scope has autofocus feature for stable images in few seconds. The large display helps to view singlemode and multimode fiber endfaces. It has built-in flashlight that illuminates dark areas and dense panels. The micro inspection scope in yellow/black color, has rechargeable NiMH battery..Micro inspection scope has autofocus feature for stable images in few seconds.Dimensions: 5.5"H x 3.2"W x 1.5"D display, 4.6"H x 2"W x 0.95"D probe.Comes in yellow/black color.Battery: Rechargeable NiMH, 2 x 1.2 V, 2700 mAh, 3 hrs of continuous probe use and 6 hrs of typical probe use battery life.Magnification: 1x, 2x, 4x display, 200x probe zoom function has 1x, 2x and 4x settings, camera type: 5 MP 0.25" CMOS sensor.Power adapter: 100 - 240 VAC +/- 10%, 50/60 Hz input, 6 VDC, 3 A maximum class II output.Input: USB 2.0 type A.PortBright a built-in flashlight illuminates dark areas and dense panels.Autofocus for stable images in few seconds.Large display to view singlemode and multimode fiber endfaces.Temperature: 0 to 50 deg C operating, -30 to 60 deg C storage without power adapter.Includes 4 tips (1.25mm, 2.5mm, SC, LC), case, rechargeable batteries and universal power adapter.Weight: 0.6 lbs.