Network Repair Tools

JackRapid is a patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle..Fast answers: JackRapid allows you to terminate jacks eight times faster than traditional impact tools with accuracy that's unmatched.Patented jack termination tool seats and terminates all wires simultaneously.Built in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.Simple, one handed operation, with an ergonomically designed handle, reduces hand fatigue.Additional information: Leviton jack: Supports jack models: 41106, 41108 Cat3/5, 5G108 Cat5e.Simple, one handed operation reduces hand fatigue.Unique design easily acco mmodates close to wall installation.Application/usage: Cable termination, cutting.Compatibility: PC.Replaceable blade head for use with multiple jack types.Fluke Networks JR-LEV-1 JackRapid Termination Tool - Quick Seating and Cutting

HV Tools Crimping Network Tools for RJ45,8P8C are perfect for all your network hardware repair needs. It has high carbon steel edges..Crimping Network Tools for RJ45,8P8C.1 x 4 x 11.perfect for all your network hardware repair needs

Material: Rubber handle.Industry standard, internationally accepted.Hook and spudger tools are built into the handle.Automatic spring handle - choose low impact for 24/26 gauge wire or high impact for 22-gauge wire.D914 and D914S impact tools accept phillips-head or flat screwdriver blade.Convenient blade storage built into the handle.Adapter blade allows technician to use a variety of torque tool bits and sockets.Easy blade insertion, locks in place.Application: Punching, Cable termination.Package Contents: D914 Impact tool, eversharp 110 blade, eversharp 66 blade, blade.Eversharp 110 blade, eversharp 66 blade.1 year limited warranty

The Fluke LinkIQ cable+network tester is the solution to verify cable performance up to 10G and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements. LinkIQ also performs ping tests to verify connectivity and provides nearest switch diagnostics including advertised data rate, switch name, IP address, port number and VLAN information, plus PoE testing and load test up to Class 8 (90 W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Additional features include: Cable Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare PC. Includes LinkIQ main unit, remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone(TM) Pro 200 Probe, and duffel bag carrying case..This cable and network tester is the solution to verify cable performance up to 10G and solve network connectivity problems.Includes Remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone Pro 200 Probe, and duffel bag carrying case.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate cable performance up to 10GBASE-T via frequency-based measurements.Get connected switch data rate, switch name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC

The Fluke Networks® JackRapid™ JR-LEV-2 patented jack termination tool is compatible with Leviton 61110, 5G110 and 6110G. The ergonomically designed handle reduces hand fatigue and offers easy, one-handed operation. It seats and cuts all wires at once and offers high quality, consistent terminations. The tool has replaceable blade head for use with multiple jack types..Fast answers: JackRapid allows you to terminate jacks eight times faster than traditional impact tools with accuracy that''s unmatched.Patented jack termination tool seats and terminates all wires simultaneously.Built in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.Simple, one handed operation, with an ergonomically designed handle, reduces hand fatigue.Additional information: Replaceable blade head for use with multiple jack types, for leviton 61110, 5G110, 6110G.Unique design easily acco mmodates close to wall installation.Application/usage: Cable termination.Compatibility: PC.Warranty: 18 months limited.Fluke Networks JackRapid Termination Tool - Saves Time

The most essential tools for electrical and telecom technicians in our sleek form-fitting PVC dur-a-grip tool pouch - holds your tools securely inside, even upside down..All the tools you need (in one pouch) to cut, strip, clean and make connections.Application/usage: Six tool kits combinations available for a multitude of applications.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.D914 and D814 industry standard punchdown tools make for solid terminations.All kits include ergonomically designed Dur a Grip pouch for convenient tool storage on belt.Cut and strip wire cleaner and faster with the electricians D snips.Includes: D814 impact tool, electricians D Snips, cable stripper, Eversharp 66/110 cut blade, probe pic, carrying case.Fluke Networks Pro-Tool Kit - Six Tools in One Place

The Fluke Network 10061120 D914S impact tool has EverSharp 110 & EverSharp 66 blade for precise cutting. It features automatic spring handle that confirms low impact for 24/26 ga wire or high impact for 22-gauge wire. It has convenient blade storage that built for easy carry. With a rubber handle and special ergonomic design, this impact tool ensures better grip and minimized hand fatigue..Industry standard, internationally accepted.Hook and spudger tools are built into the handle.Automatic spring handle --choose low impact for 24/26 ga wire or high impact for 22-gauge wire.D914 and D914S impact tools accept Phillips-head or flat screwdriver blade.Convenient blade storage built into the handle.Adapter blade allows technician to use a variety of torque tool bits and sockets.Easy blade insertion, locks in place.D914STM soft touch impact tool features a rubber handle and special ergonomic design for better grip and to reduce hand fatigue.Copper type: punchdown/impact.Type : copper.Accepts all fluke networks industry standard blades. Punch down tool measures 1.4" x 5.9" x 1".Fluke networks D914s impact tool 110 eversharp 66 blade.Impact tool with EverSharp 110 and EverSharp 66 blade, accept Phillips-head or flat screwdriver blade.

The Fluke Networks network testing device will allow you to keep your network running smoothly. It will allow you to easily test twisted-pair cables and trace installed hidden cables. It uses an easy-to-read LED interface and a two-tone generator to let you know whether it detects any problems or defects..Display type: LED.Interfaces/Ports: 1 x RJ-45.Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs.Easy-to-read fault display.Tone generator for tracing installed cables hidden in walls, floors and ceilings.Remote unit enables one-person testing of installed cables.Micromapper's built-in tone generator works with the IntelliTone™ pro probe or any other analog probe, allowing you to trace cable through walls, floors and ceilings.Micromapper also includes a remote unit that allows one person to test installed cabling or patch cords.MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs.Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults in your cable.Generation of two tones for tracing cables and lication hidden cables.Includes: Micromapper and Micromapper remote, patch cable, 6 V alkaline battery and user guide.Weight: 0.28 lbs..Dimensions: 4.93"(H) x 2.05"(W) x 1.18"(D).1 year limited warranty.Fluke Networks Network Testing Device - Powerful and Reliable

FTK2000 Network Accessory Kit.Networking Accessory.Part Number: FTK2000.Rigid hard shell is coated with scratch resistant finish for high quality durability

Professional, installer grade 110/66 impact punch down tool..Professional, installer grade 110/66 impact punch down tool.Both blades (110 and 66) have cutting and non-cutting sides.Handle compartment for storing blade not in use.Adjustable impact preference.Rugged, polyacetal resin frame for long-life use

The most essential tools for electrical and telecom technicians in our sleek form-fitting PVC dur-a-grip tool pouch - holds your tools securely inside, even upside down..All the tools you need (in one pouch) to cut, strip, clean and make connections.Application/usage: Six tool kits combinations available for a multitude of applications.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.D914 and D814 industry standard punchdown tools make for solid terminations.All kits include ergonomically designed Dur a Grip pouch for convenient tool storage on belt.Cut and strip wire cleaner and faster with the electricians D snips.Includes: IS50 with D914S impact tool, D snips, cable stripper, eversharp 66/110 cut blade.Fluke Networks Pro-Tool Kit - Tools and Storage in One

The Fluke Networks® Jack Rapid™ JR-PAN-2 punchdown tool in yellow, reduces time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle. The patented jack has built-in blade that cuts off the excess wire after it seats in the connector, eliminating the need for a secondary trim step. It offers simple, one-handed operation, with an ergonomically designed handle that reduces hand fatigue..Punchdown tool reduces time and increases accuracy by seating and terminating all wires.Dimensions: 5 1/2"H x 5 1/2"W x 1 3/4"D.Comes in yellow color.Patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle.Allows to terminate jacks eight times faster than traditional impact tools.Seats and terminates all wires simultaneously.Built in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.One handed operation with an ergonomically designed handle which reduces hand fatigue.Does not punch into the palm of your hand or through drywall again

The D914S impact tool provide quality terminations on the first punch, helping to achieve the highest quality possible on network installations. The only impact tool that combine torque and impact in one tool..D914S Impact Tool w/Eversharp 66/110 Cut Blade.Special ergonomic design for better grip and to reduce hand fatigue.Automatic spring handle: choose low impact for 24/26 gauge wire or high-impact for 22 gauge wire.Use the spudger to remove the cross-connect module from the mounting brack.Application/usage: Cable termination.Accept Phillips-head or flat screwdriver blade.Includes D914S 10061810 impact tool, EverSharp 110 blade, EverSharp 66 blade.Included accessories: D914S 10061810 impact tool, Eversharp 110 blade, eversharp 66 blade.Fluke Networks D914S Impact Tool - User-Friendly Network-Installation Tool

When you're responsible for monitoring your company's network, the Fluke Networks VisiFault universal visual fault locator is a valuable accessory. The fault locator makes it easy to identify and trace fibers, so you can monitor problem areas and take action to stabilize the system. With its durable, sturdy case, the locator is designed to perform efficiently even after bumps and falls..Speeds fiber tracing and identification.Locates faults including tight bends, breaks and bad connectors.Accelerates end-to-end fiber checks.Easily verifies polarity and identifies fibers.Features continuous and flashing modes, ergonomic case survives drops, impacts and vibrations.Supports 2.5 mm and 1.25 mm SFF connectors.Over 80 hours of battery life with two AA batteries.Attaches with handy lanyard and carrying case.Survives drops, vibrations and impacts.Features continuous and flashing modes.Simplifies fiber polarity verification.Bright red visible laser light source, accelerates end-to-end fiber continuity checks.Weight: 5.7 oz.Dimensions: 6.2"(H) x 2"(W) x 1.13"(D).Fluke Networks VisiFault Universal Visual Fault Locator - Accelerated Fiber Checks

Multimode Fiber Verification Kit with Visifault - Includes Simplifiber Pro optical power meter, 850/1300 multimode source, Visifault VFL, FindFiber Remote ID source, Magnetic strap attachments, and carrying case; SC, ST, and LC power meter adapters also included.Multimode Fiber Verification Kit with Visifault.Networking Accessory.Part Number: FTK1200

Make effortless, uniform connections with Fluke Network''s D814, all-in-one, telecom punchdown tool. Its adjustable impact wheel has high and low settings for any type of termination..66 blades.Lightweight and easy to use.Allows low impact for 24 and 26 gauge wire or high impact for 22 gauge wire.Automatic spring mechanism provides right impact to seat and/or terminate wires.Compartment at the end of the tool stores an extra blade.Includes: D814 10055200 impact tool, eversharp 110 blade.Application/usage: Punching, cable termination.Warranty: Lifetime.Fluke Networks Impact Tool - Seats and Terminates Wires

All kits include ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt..Material: Rugged PVC pouch, aluminum stripper.All kits include ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt.D914 and D814 industry standard punchdown tools make for solid terminations.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.Cut and strip wire cleaner and faster with the electricians' D-Snips.Six tool kits combinations available for a multitude of applications.D914S impact tool provides fast, comfortable reliable connections to blocks and jacks.D-snips for faster cleaner safer no-slip cutting and stripping.Cable stripper strips outer Jacket of UTP/STP and other flexible cables without damaging wires.Package Contents: Pro-tool kit IS60, D914S impact tool, D-Snips, cable stripper, maglite,sharpie and eversharp 66/110 cut blade.Includes: Pro-Tool Kit IS60, D914S Impact tool, D-Snips, Cable Stripper, Maglite, Sharpie And Eversharp 66/110 Cut Blade

MS2-FTK MicroScanner copper and fiber cable verifier kit helps find common errors by displaying graphical wiremap, pair lengths, distance to fault, and far-end device. Integrated RJ11, RJ45, and coax test ports support many types of low-voltage cable testing with no need for adapters. Test and verify your fiber connections with the SimpliFiber Pro power meter and light source..Network copper and fiber test kit measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports.Dimensions: 1.4"H x 3"W x 6.4"D.Comes in black and yellow.Kit includes: MicroScanner cable verifier and SimpliFiber Pro (FTK1000) fiber test kit (SimpliFiber Pro optical power meter, 850/1300 multimode source, magnetic strap attachments, carrying case, and SC power-meter adapter).Test connectors: shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs; MicroScanner2: F-connector for coaxial cable.Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs.Features a monochrome LCD with backlight.MicroScanner solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices.MicroScanner PoE: solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco's Universal Power over Ethernet) compatible PoE devices.MicroScanner2 detects the advertised speed of 802.3 Ethernet ports with speeds of 10Mbps, 100Mbps, and 1Gbps.Verifies media services: 10/100/1000 Ethernet, POTS, and PoE.Tone generator produces 500kHz digital, 400kHz and 1kHz analog tones.Supports toning and cable mapping with a Fluke Networks digital IntelliTone probe

VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks. They are not very helpful for cable runs more than a few meters, or when the cable not visible or accessible, or when the laser light can't penetrate the jacket. Optical Time Domain Reflectometers (OTDR) provides graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time to and skill to operate. Fiber QuickMap fills the gap between a VFL and an OTDR. These models have the simplicity of a VFL, and provide distance and power information on high losses, breaks, and the end of the fiber. They also identify live fiber.Battery Chemistry: Alkaline.Number of Batteries Supported: 2.Battery Size Supported: AA

The Fluke Networks® FTK1475 portable fiber verification kit includes implifiber Pro multimode and singlemode PMLS, Visifault, two findfibers, findfiber remote ID, three power meter adapters, reference guide, carrying case, NFC-KIT-BOX cleaning kit, 1.25 mm swabs and USB interface cable. Kit helps to verify optical loss and power levels at 850, 1300, 1310 and 1550 nm, inspect fiber end-faces, locate cable faults..Fiber verification kit has advanced time-saving features.Complete fiber verification kit is for contractors and network technicians.Use this kit to verify optical loss and power levels at 850, 1300, 1310 and 1550 nm, inspect fiber end-faces, locate cable faults.Include: Simplifiber Pro multimode and singlemode PMLS, Visifault, two findfibers, findfiber remote ID, USB interface cable.Include: Three power meter adapters (SC, ST and LC), reference guide, carrying case, NFC-KIT-BOX cleaning kit, 1.25 mm swabs

The Fluke LinkIQ is capable of measuring lengths up to 1000' and provides distance to faults such as opens, shorts, and unterminated cable. The included MS-IE remote adapter identifies miswires and split pairs on RJ45, M12X, M12D, and M8D terminated cables. The LinkIQ qualifies cabling performance from 10 Mb/s to 10 Gb/s for EtherNet/IP, PROFINET, EtherCAT and other Industrial Ethernet protocols, performs ping tests to verify connectivity and also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE and load testing up to Class 8 (90W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Includes LinkIQ main unit, Remote ID #1-7, IntelliTone Pro 200 Probe, RJ45-RJ45 patch cord (M-F), RJ45-RJ45 patch cord (M-F), Quick Reference Guide, AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter, hanging strap with remote ID holder, and duffle bag carry case..This cable and network tester is capable of measuring lengths up to 1000' and providing distance to fault analysis (opens, shorts, and unterminated cable).Includes remote ID, RJ45-RJ45 patch cord, RJ45-RJ45 patch cord (M-F), AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate EtherNet/IP, PROFINET, EtherCAT cable performance up to 10GBASE-T.Get connected switch data rate, name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC

The Fluke Networks® EverSharp™ 10176500 110 punch down tool blade stays sharper for longer time and provides better terminations at the block. It fits the D914S, D914, D814 and D214 punchdown tools..Punch down tool blade for use with D914, D914S, D814 and D214 punch down tools.Sharper blades offer better terminations at the block, leading to quality installs.Stays sharper longer than other competitive blades

The Tripp Lite T100-001 black/blue crimping tool with cable stripper, strips flat and round cable. It terminates 4-wire RJ11, 6-wire RJ12 and 8-wire RJ45 modular plugs. This crimping tool has easy-grip handle for added grip..RJ11/RJ12/RJ45 crimping tool with cable stripper for reliable operation.Comes in black/blue color.Terminates RJ11, RJ12 and RJ45 modular plugs.Strips flat and round cable.Sturdy construction for long life.Easy-grip handle feels comfortable in your hand.Contains quick start guide.RoHS and Green compliant.Comes with 1 year limited warranty

Fluke Networks Contractor telecom kit features punch down tool for reliable terminations. Contractor telecom kit offers a cable stripper that quickly rings and slits many types of cable..D814 industry standard punch down tool for reliable terminations.Eversharp 66/110 cut blade provides flexibility for different block and jack terminations.Cable stripper quickly rings and slits many types of cable.Cut and strip wire cleaner and faster with the electricians D-snips.Connect to jacks for testing with the standard 4-wire modular adapter.Soft zippered pouch keeps your tools all in one convenient place.Includes a TS 30 test set with angled bed-of-nails cord, D814 impact tool, eversharp 66/110 cut blade, electrician's D-snips, cable stripper, standard 4-wire modular adapter and probe pic.Fluke Networks Contractor telecom kit is made for technicians who install, test and troubleshoot phones and has high impedance datasafe operation.

The DSX Cable Analyzer Series copper cable certifiers enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you'll be. Unfortunately, there are a lot of things that slow the process down - setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand. As part of the Versiv cabling certification product family, the DSX Cable Analyzer Series copper cable certifiers provides accurate, error-free certification. In the installation business there are multiple teams, varying media types and multiple testing requirements. The difference between being profitable or not is just a few percentage points. The DSX certifies copper cabling, complies with all standards including Level VI/2G accuracy, making jobs easier to manage, and getting to system acceptance faster. It's not just for the expert technicians and Project Managers. Individuals of various skill levels can improve the set-up, operation, test reporting, and simultaneously manage diverse projects..Versiv modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection.Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards.ProjX system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly.Taptive user interface simplifies set-up, and eliminates errors.Analyze test results and create professional test reports using LinkWare management software

Fluke Networks® MT-8200-60-KIT IntelliTone Pro 200 LAN toner and probe kit comes with IntelliTone 200 LAN toner and 200 probe and coax F connector adapter for reliable operation. Probe helps in detecting 1 KHz and digital signal from an analog toner. You can also isolate cables and wires that comes within a bundle. This toner and probe with IntelliTone digital toning technology helps in detecting faults and verifies continuity in just one-step. Whereas the toner and probe with SmartTone® analog toning technology isolates single pair of wires and helps in detecting or locating voice, audio or video. Kit includes 9-V batteries, two RJ11/RJ45 patch cables and test leads with alligator clips..IntelliTone Pro 200 LAN toner is suitable to detect faults and verifies continuity.Includes 1 alkaline battery with run time of 20 hours and provides 9 V of voltage for added convenience.Supports copper media for high speed transmission.Banana x 2, RJ-45 interfaces/ports for flexible connectivity.Cable termination, Ethernet link diagnostic, Tests for continuity, Toning tests, tools and measurements:.Requires operating temperature of 32 - 104 deg F, storage temperature of -4 - 140 deg F and 95 % relative humidity.Operates at altitude of 3000 m.Comes with tomer LED display,(8) LED indicators and Thumbwheel switch, volume control wheel.Contains IntelliTone 200 LAN toner and 200 Probe, coax F connector adapter, (2) RJ11 and (2) RJ45 patch cables.Fluke Networks® IntelliTone Pro 200 LAN toner and probe kit eliminates false signals and noise with its digital toning. Helps in locating cables on active networks.

Make effortless, uniform connections with fluke network's D814, all-in-one, telecom punchdown tool, its adjustable impact wheel has high and low settings for any type of termination..Convenient blade storage built into the end of the handle.Accepts standard industry blades.Lightweight and easy to use.Adjustable spring impact mechanism allows low impact for 24 - and 26 gauge wire or high impact for 22 gauge wire.Easy blade insertion.Includes: D814 series automatic impact tool, EeverSharp 110 blade, Eversharp 66 blade, free blade 934.D814 series automatic impact tool has adjustable spring impact mechanism allows low impact for 24- and 26-gauge wire or high impact for 22-gauge wire.

Fluke Networks Termination test kit consists of IntelliTone pro probe IS60 pro-tool, multi-language getting started guide, user CDs, battery, deluxe fluke networks carry case. Kit has an approximate weight of 12.8 oz..Reduce test time and user error.Eliminate awkward test adapters.Rule out service problems fast.Locate elusive cables in seconds.Repair or replace tools less often.Environmental parameters: Min operating temperature 32 degree F.Technology: LCD.Color support: Monochrome.Features: Backlight.Connectors: F connector, RJ-45, RJ-11.Compliant Standards: FCC class A, EN 61326-1, EN 61010-1.Cables included: 1 x RJ-45 to RJ-45 patch cable, 1 x RJ-11 cable.Cable type: UTP, FTP, SSTP.Included accessories: Carrying case, lanyard, Pro-Tool kit IS60.Weight: 12.8 lb.Termination test kit.Fluke Networks® Termination test kit with a microscanner2 cable verifier tests all common media types including RJ11, RJ45 and coax without using adapters.

The Fluke Networks® 11294000 Need-L-Lock crimping pliers combine UR UY UG connector crimper with needle-nose pliers so you can carry one less tool on your belt. Aligned crimping jaws come down square to ensure a solid connection and they are grooved to provide a better grip on wires and feature a built-in cutter and cable stripper. The 6 1/2" needle-nose crimping pliers are forged from high-quality steel with rubber-coated ergonomic handles for a reliable, non-slip grip..Combines a UR/UY/UG connector crimper with needle-nose pliers.Aligned crimping jaws come down square to ensure a solid connection.Jaws are grooved to provide a better grip on wires.Built-in cutter and wire stripper.Rubber coated handles for a non-slip grip.Needle-nose crimping pliers.UR/UY/UG connector crimper.Crimping pliers With jaws are grooved to provide a better grip on wires and feature a built-in cutter and cable stripper.

The Fluke Networks 44300000 d-snip cable scissors allow you to easily cut through cables and wires with a single tool. The scissors are a great choice for minor electrical work, including line splicing, installation, and removal..Made with high-quality forged steel for cleaner, faster cuts.Minimize hand fatigue with the special tail on the handle.File and scraper on both blades for cleaning wire.Notched blade for stripping 19 and 23-gauge wire.Cuts up to 16-gauge solid and 12-gauge stranded wire.Serrated blade or non-slip wire cutting.Includes: One pair of D-snips.90 days limited warranty.Fluke Networks 44300000 D-Snip Cable Scissors - Cleanly Cut Wires

Round cable stripper for a variety of flexible round cable..Full line of cable strippers.Double-slotted stripper for 22/24 gauge wire insulation.Coax strippers with two or three levels.Combo stripper for multiple wire types and applications.Application: Stripping, cutting.Includes: Double slotted, plenum, round, coax and combo.18 months limited warranty

Fluke Networks MS2-100 MicroScanner2 Cable verifier provides revolutionary change in voice, data and video cable without any technician error. Incorporated with RJ11, RJ45 and coax cable test ports that support virtually any type of low-voltage cable testing..MicroScanner2 cable verifier is suitable to verify voice/data/video cable and services.Measures 3"H x 6.4"W x 1.4".Includes 2 AA alkaline battery with run time of 20 hours.Supports twisted pair media for high speed transmission.F connector, RJ-11, RJ-45 interfaces/ports for flexible connectivity.FTP, SSTP, UTP cables for long distance transmission.Distance to fault, Length, PoE, speed test copper cables to 1000Base-T, Wiremap tests, tools and measurements.Requires operating temperature of 32 - 123 deg F, storage temperature of -4 - 140 deg F and 90 % relative humidity.Operates at altitude 4000 m (operating) and 12000 m (storage).Monochrome, backlight LCD display provides brighter images.Length measurement of 11.81" - 1509.19'.Cable tone generator, rubber over mold enhances grip and increases ruggedness.Contains MicroScanner2 cable verifier with main wiremap adapter, multi-language getting started guide, user CD, batteries.Meets N10140 C-Tick EMC standard, FCC Part 15 Class A, CE European Union Directives.Weighs 0.8 lbs.Comes with 1 year warranty.Fluke Networks® MicroScanner2 Cable verifier is capable of verifying voice/data/video cable and services with the help of a revolutionary user interface. Features strong housing.

The Fluke Networks™ Fiber QuickMap™ FQM-100-M-VFL distance and fault locator works on multimode fiber. It helps to locate severe bends, high-loss splices, breaks and dirty connectors in multimode fiber. It also detects live optical signals before it begins testing. The distance and fault locator in yellow/black color, operates with two AA alkaline batteries..Distance and fault locator helps to locate severe bends, high-loss splices, breaks and dirty connectors in multimode fiber.Dimensions: 6.9"H x 3.1"W x 1.5"D.Comes in yellow/black color.Battery: 2 AA alkaline batteries, 1500 tests life.Works on multimode fiber, 50/125 mu m and 62.5/125 mu-m 850 nm output wavelength, measure up to 4921'.Locate severe bends, high-loss splices, breaks and dirty connectors in multimode fiber.Measure and locate high-loss splices, locate the end of a fiber.Find potential sources of high bit error rates caused by reflectance from dirty or poor connections.Detects live optical signals before it begins testing, quick set-up, connect your fiber and press the test button.Find problems quickly, 6 sec test time - no more blind troubleshooting that can waste hours.Change the Index of Refraction (IOR) to improve fiber length accuracy, visible in dark areas, backlighted display turns off automatically.Temperature: 0 to 50 deg C operating, -20 to 60 deg C non-operating, 75 - 95% operating relative humidity.Includes screw on interchangeable SC adapter, UPC-UPC 2 m patch cord, carrying case, guide, safety manual, batteries & VisiFault Visual fault locator.Certifications and standards: Meets RoHS, CE, FCC, CSA standards

The DSX CableAnalyzer Series copper cable certifiers enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you'll be. Unfortunately, there are a lot of things that slow the process down – setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand..Cable analyzer enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system.Cable analyzer dimensions: 11"H x 5.25"W x 2.63"D.Made of high-impact plastic with shock-absorbing overmold, comes in yellow.Kit includes: versiv mainframe & remote, two DSX-5000 CableAnalyzer modules, set of Cat 6A/Class EA permanent link adapters, set of Cat 6A/Class EA channel adapters, two headsets, two handstrap, two shoulder straps, carry case, USB interface cable, versiv open source software CD, two AC chargers, two universal couplers, integrated Wi-Fi, Statement of calibration and getting started guide.Works on 1000MHz maximum frequency.Standard link interface adapters: shielded RJ45, Tera, GG45.Supported test parameters: wire map, length, propagation delay, delay skew, dc loop resistance, pair-to-pair resistance unbalance, pair resistance unbalance, insertion loss, return loss, common mode return loss, near end crosstalk, far end crosstalk, attenuation-to-crosstalk ratio, acr-f, power sum acr-f/next/acr-n/alien next/alien attenuation next ratio far end, common mode to differential mode next,transverse conversion loss, equal level transverse conversion transfer loss.5.7" LCD with a projected-capacitance touch screen allows for quick tester setup with easily selectable cable types, standards, and testing parameters.Versiv enables users to accomplish more than ever before with a cable tester, by accelerating every step of the testing process.LinkWare Live cloud service lets the project manager remotely set up the testers and monitor job progress and even location from any smart device.ProjX management system eases tasks from initial setup of a job to system acceptance, it eliminates redundant steps and ensures that all tests are completed correctly the first time, and every time.Adaptive user interface puts advanced data analysis and easy setup and operation at the fingertips of technicians of all skill levels.LinkWare PC management software provides unmatched analysis of test results and professional test reports.The DSX reduces the time required to fix cabling faults with dedicated diagnostics, a simple test that locates the problem.Integrated Wi-Fi allows you to easily upload results to LinkWare Live.Meets or exceeds ANSI/TIA-568.2-D, ISO/IEC standards

The DSX CableAnalyzer Series copper cable certifiers enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you'll be. Unfortunately, there are a lot of things that slow the process down - setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand. As part of the Versiv cabling certification product family, the DSX CableAnalyzer Series copper cable certifiers provides accurate, error-free certification. In the installation business there are multiple teams, varying media types and multiple testing requirements. The difference between being profitable or not is just a few percentage points. The DSX certifies copper cabling, complies with all standards including Level VI/2G accuracy, making jobs easier to manage, and getting to system acceptance faster. It's not just for the expert technicians and Project Managers. Individuals of various skill levels can improve the set-up, operation, test reporting, and simultaneously manage diverse projects..Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection.Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards.ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly.Taptive™ user interface simplifies set-up, and eliminates errors.Analyze test results and create professional test reports using LinkWare™ management software.Graphically displays the source of failures including crosstalk, return loss and shield faults for faster troubleshooting.Intertek Verified to TIA Level 2G - the most stringent accuracy requirement.Copper cable certifiers endorsed by cabling vendors worldwide.Built in Alien Crosstalk testing capability.Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management Software.

Fluke Networks OptiFiber Pro designed for enterprise, datacenter, outside olant and PON fiber. As fiber networks evolve, the need to test in more locations has increased. OTDRs are now needed for: FTTx, enterprise, OSP, PON, POLAN. Many OTDRs designed for fiber troubleshooting are designed for carrier and contain cumbersome and complicated features. The OptiFiber Pro OTDR family is the first class of OTDRs that is built with features and usability for both the enterprise network engineers, and cable installers working in both enterprise and OSP environments. Fluke Networks OptiFiber Pro OTDRs make novices and experts faster. Advanced features include Manual Expert mode, pinch and zoom for in-depth trace analysis and SmartLoop for bi-directional testing. Supports Versiv copper and fiber loss certification modules..The optical time domain reflectometer (OTDR) for testing fiber networks.Mainframe with module dimensions: 11"H x 5.25"W x 2.63"D.Comes in black and yellow.Kit includes: versiv 2 mainframe, OptiFiber Pro Quad OTDR module, shoulder strap, carry case, USB interface cable, versiv open source software CD, AC charger, two quick clean cleaners, two SC/LC multimode launch cables, two SC/LC singlemode launch cables, two OTDR source port interchangeable LC adapters, USB fiber inspection video probe with four tips, SC/SC simplex adaptor, two launch fiber hanging straps and magnets, integrated Wi-Fi, Statement of calibration and getting started guides..Multiple wavelengths (850, 1300, 1310,1490, 1550, and 1625nm) support LAN, datacenters, PON, FTTx, and outside plant applications.Automated setup senses fiber characteristics and sets measurement parameters.SmartLoop OTDR enables automated testing and analysis of two fibers in a single test, eliminating the need to travel to the far end of the connection to perform tests.Adaptive user interface puts advanced data analysis and easy setup and operation at the fingertips of technicians of all skill levels.Compatible with Linkware Live and enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare PC cable test management software.Test times in 2 seconds in Quick Test mode.Quickly test datacenter fiber with preprogrammed settings.Troubleshoot datacenter fiber links with short patch cables and many connectors because of ultrashort dead zones.Easily characterize all connectors, splices, and areas of high loss with graphical EventMap view.Pass/Fail certification of fiber optic connector endfaces.ProjX management system increases return on investment by enabling OTDR.Reduce network downtime by quickly and precisely identifying faults on all fiber types.Built-in Visual Fault Locator (VFL) easily identifies damaged fibers.Meets or exceeds ISO/TIA standards.Integrated Wi-Fi allows you to easily upload results to LinkWare Live

Fluke Networks® MS2-KIT MicroScanner2 Professional kit includes MicroScanner2 cable verifier with main wiremap adapter, remote identifiers #2-7 and IntelliTone Pro 200 probe. Comprises of shielded twisted-pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter and F Coax push on patch cord for effective detection. Comes with accessory soft pouch for user convenience. Features two AA alkaline batteries and a 9 V alkaline battery for long working of the verifier. Kit has MicroScanner2 getting started guide, MicroScanner2 owners CD, IntelliTone Pro getting started guide and IntelliTone Pro owners CD for trouble-free usage of the device. All the components come in a deluxe Fluke Networks carry case for added convenience..MicroScanner2 professional kit is suitable to verify voice/data/video cable and services.Measures 6.4"H x 3"W x 1.4"D.Supports copper media for high speed transmission.F connector, RJ-11, RJ-45 interfaces/ports for flexible connectivity.FTP, SSTP, UTP cables for long distance transmission.Distance to fault, Length, PoE, speed test copper cables to 1000Base-T, Wiremap tests, tools and measurements.Requires operating temperature of 32 - 123 deg F, storage temperature of -4 - 140 deg F and 90 percentage relative humidity.Operates at altitude 4000 m (operating) and 12000 m (storage).Monochrome, backlight LCD display provides brighter images.Locates virtually any cable or wire pair with IntelliTone digital and analog toning.Rubber over mold enhances grip and increases ruggedness.Contains accessory soft pouch, 2 x AA alkaline batteries, 1 x 9 V alkaline battery, MicroScanner2 getting started guide, owners CD.Contains cable verifier with main wiremap adapter, remote identifiers, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord.Meets N10140 C-Tick EMC standard, FCC Part 15 Class A, CE European Union Directives.Weighs 0.8 lbs.Comes with 1 year warranty.Fluke Networks® MicroScanner2 Professional kit tests voice/data/video cable/services with the help of a revolutionary user interface. Includes essential verification components.

Fluke Networks® CableIQ main wiremap adapter helps to detect unused switch ports that can be reallocated. Wiremap adapter helps to graphically map wiring configuration and shows distance to faults..Adapter adapter.Sold as each.Wiremap adapter for CableIQ.Fluke Networks® CableIQ main wiremap adapter is used as a replacement wire for main CableIQ qualification tester.

Versiv modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection.Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards.ProjX system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly.Taptive user interface simplifies set-up, and eliminates errors

Analog tone and probe is the best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone technology..Interfaces/ports: Tone mode, 1 x RJ 11.Material: Copper.Storage temperature: 40 - 158 deg F.Humidity range operating: 5 - 95% (non condensing).Connectors: BNC, RJ 11.Output voltage level in continuity mode: 8 Vdc with fresh battery, over voltage protection: 60 VDC in toner/polarity mode.Frequency: 1000/1500 Hz nominal, battery: 9 V alkaline.On/off push button.Loud large speaker amplifies tone through walls, enclosure, wood or plaster.Tests, tools and measurements: Toning.Quick twist tip for easy replacement, easy to use adjustable volume control dial.Includes: analog toner, probe.Application/usage: Cable testing.SmartTone provides five distinct tones for exact pair identification.Loud tones can be send up to 10 miles (16 kilometers) on most cables, this tone change you hear through the probe positively verifies the correct wire pair.Warranty: 18 months limited.Fluke Networks Pro3000 Series Analog Tone and Probe Kit - Identify Inactive Lines Fast

Crimps 8-position RJ45 connectors and 4- and 6- position RJ11 and RJ12 connectors..Embedded flat cable cutter and stripper.Application: Stripping, cutting, crimping.Lifetime limited warranty

The MicroScanner PoE cable verifier validates and troubleshoots your Industrial Ethernet copper cabling, helping to reduce down time in time-sensitive industrial networks. It performs continuity tests on all wires in a few seconds and displays the results graphically, so you can see opens, shorts, and crossed wires. The MicroScanner PoE helps make installation, maintenance, and troubleshooting on IT, security, PoE lighting, Ethernet-based HVAC devices, and IP-based building automation systems easier. Its oversized, backlit LCD screen displays clear results in any light or complete dark with intuitive icons and support of Class 0 to 8 PoE..PoE cable verifier validates and troubleshoots your Industrial Ethernet copper cabling, helping to reduce down time in time-sensitive industrial networks.Works on two AA alkaline batteries.Operating temperature: 32-113 degrees Fahrenheit.Reports PoE class (0-8), injector voltage, switch speed up to 10G.Shows wire map, length, cable ID, and distance to fault.Trace cable or wire pairs with the included IntelliTone Pro 200 probe.Includes Remote IDs to determine network layout quickly

Fluke MicroScanner PoE cuts through the confusion of your PoE installation by providing swift and simple PoE verification. The tester detects the available PoE class (0-8) in accordance to the latest PoE standards and displays the voltage from passive PoE sources. Everything cable technicians need to know, including available services (up to 10G Ethernet), cable length, wiremap, cable ID, and distance to fault are all shown on the LCD screen. Built-in IntelliTone digital and analog toning precisely locates virtually any cable or wire pair – even on active networks. The ergonomic design features sleek rubber overmold to enhance grip and ruggedness. Includes MicroScanner POE (Power over Ethernet) cable verifier with detachable wiremap adapter, getting started guide (10 languages), two AA alkaline batteries, carry pouch, and one-year warranty..This cable tester PoE cuts through the confusion of your PoE installation by providing swift and simple PoE verification.Includes: getting started guide (10 languages), two AA alkaline batteries, carry pouch.Works on two AA alkaline batteries.Operating temperature: 32-113 degrees Fahrenheit.Display network switch speeds capabilities up to 10G.Locate and trace cable with toning (probe sold separately)

Startech.com® Punch Down Tool comes complete with 2 metal bits. Punch down tool features two all metal, removable/replaceable bit assemblies and an integrated holder for spare bits..Comes complete with 2 metal bits. (66 and 110 bit).Features two all metal, removable/replaceable bit assemblies, and an integrated holder for spare bits.Removable and replaceable bit assembly.Integrated holder for spare bit.Includes: 110PUNCHTOOL punch down tool, 2 x metal bits (66 and 110 bit), bit assemblies.Standards: RoHS complaince.Warranty: 2 years.Punch down tool with 110 and 66 blades features two all-metal, removable/replaceable bit assemblies, and an integrated holder for spare bits.

The Fluke Networks Quick Clean Cleaners are a family of mechanical cleaning tools designed to clean fiber optic connector end faces on patch cables, within adapters or patch panels. These Quick Clean Cleaners are molded with an antistatic material and use a novel dry cleaning strand that gently sweeps and removes harmful contaminants from the connector without damaging the connector end face. These tools are particularly effective at removing contaminants during fiber optic installation that include: road dust (ISO 12103-1), skin oil residue, salt water residue, alcohol residue, vegetable residue, graphite dryer lint, hand lotion, distilled water residue..Cleaner is designed to clean LC, secure keyed LC, and MU connectors.Contains five 1.25mm cleaner per pack.Unlike traditional swab cleaners that rely on the technique of the user, these cleaners provide consistent cleaning every time.The user can easily engage the cleaner using a simple push motion and the user will hear a "click" sound when the process is completed.Features: simple pushing motion to engage tool; audible click to alert the user when tool is fully engaged; cleans over 525 end faces; tip extends to 208mm for hard-to-reach connectors; crush-resistant to over 250N; impact-resistant to survive drops over 1.5m

The Fluke Networks® SFPOWERMETER SimpliFiber Pro optical power meter has USB port for connectivity. It measures 6.4" x 3.2" x 1.5". The power meter has InGaAs detector and comes with SC adapter..Dimensions: 6.4"H x 3.2"W x 1.5"D.Interface/ports: USB, one SC port.Fiber wavelength: 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm, 850 nm.Battery chemistry: Alkaline.InGaAs detector, USB connectivity.Weight: 11.5 oz..Detector type: InGaAs, calibrated wavelengths: 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm.Wavelength accuracy: 850 nm: +/-30 nm, 1300 nm: +/- 20 nm, Spectral width (FWHM): 850 nm: 50 nm (typical), 1300 nm: 135 nm (typical).Power display units: dBm, mW, Micro W, Minimum output power: 850/1300 nm: -20 dBm, Power output stability: +/- 0.1 dB over 8 hours.Reference individually set for each wavelength.Single-port, simultaneous dual wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record.Additional 1490 and 1625 nm wavelengths extends product use to broader applications.Min/max capability automates precision tracking of intermittent power fluctuations.Large internal memory save 1000 results which enables continuous testing and recording.Includes simplifiber SFPOWERMETER pro optical power meter, SC adapter.Certifications and standards: EMI, RFI, EMC.Fluke Networks® SimpliFiber® Pro optical power meter has large internal memory that saves up to 1000 results which enables continuous testing and recording.

The Fluke Networks® SimpliFiber® FTK1000 multimode fiber verification kit in yellow, includes pro optical power meter, 850/1300 multimode source, carrying case and SC power-meter adapter. The single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record. The CheckActive™ feature emits an audible tone and displays an icon when it detects a live fiber and the FindFiber™ remote id enables one individual to identify cable connections or routings especially useful at patch panels..Basic multimode fiber verification kit.Dimensions: 5.6"H x 3.2"W x 1.6"D.Comes in yellow color.Dual wavelength testing and tests multimode and singlemode fiber.Measures optical power and loss at 850 nm and 1300 nm using the 850/1300 source and meter.Measures optical power and loss at 1310 nm and 1550 nm using the 1310/1550 source calibrated wavelengths in the power meter at 1490 nm and 1625 nm.Offers quick remote identification of cabling runs with find fiber remote IDs.Conduct pre testing and qualify cabling runs.Single port testing for simple network connection.Ruggedly built for demanding field use.Auto senses source wavelength.Operating temperature: 14 deg F to 122 deg F (-10 deg C to 50 deg C).Weight: 1.8 oz.

The fluke networks TS19 test set combines all the essential test set features at an affordable price. This test set was specifically designed for in-house telecom technicians..Dimension: 3.4"(H) x 2.4"(W) x 8.8"(D).Material: Copper.Storage temperature: 40 deg F.Humidity range operating: 10 - 80% (non condensing).Connectors: Banana x 2.Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode thus ensuring the integrity of critical data lines.Features such as Tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.Electronic ringer, ON/OFF.Field replaceable belt hook.Tests, tools and measurements: Pulse, toning.High impedance monitor for DataSafe™ operation.Includes: accessories: 2 x banana to alligator clip.Hearing aid compatible.Test set features high impedance monitor for datasafe™ operation and has continuous polarity indication.