PCI Express SSD Adapters

The StarTech.com PEX4M2E1 x4 PCIe express to M.2 PCIe SSD adapter offers best cost effective solution for ultra fast data access, as well as boost your system speed and performance by adding a PCIe M.2 SSD to your PC. This red adapter is equipped with a full profile bracket and includes a low profile bracket for installation in small form factor computers..Bus type: PCI Express.Compatible drive types (Type and Rate): M.2 (NGFF, M-Key, PCIe x4).Drive installation: Fixed.Drive size: 22 m - M.2 NGFF.Interface: PCI Express.Supported drive height(s): 2242, 2260, 2280, 22110.Drive connectors: 1 x M.2 (NGFF, M-Key, PCIe x4).Host connectors: 1 x PCI Express x4 male.OS compatibility: OS independent.LED indicators: 1 x pin header on board for drive LED connection.Operating temperature: 5 to 50 deg C (41 to 122 deg F), storage temperature -25 to 70 deg C (-13 to 158 deg F).Comes in red color.Max drive height: 4.3".Dimensions: 7.2"H x 4.8"W x 7"L.Weight: 1.6 oz..Comes with 2 year warranty

Dual M.2 PCIe SSD Adapter Card, x8 / x16 Dual NVMe or AHCI M.2 SSD to PCI Express 4.0, Up to 7.8GBps/Drive, For 2242/2260/2280/22110mm PCIe M-Key M2 SSDs, Bifurcation Required - PC/Linux Compatible.This Dual M.2 PCIe SSD Adapter enables you to install 2x PCIe M.2 SSDs (NVMe or AHCI) into a computer through an available x8/x16 PCI Express 4.0 slot | Read and write speeds up to 7.8GBps per drive.PCIe Bifurcation support is required by the Computer/Motherboard | Compatible with PCIe 3.0 x8 or x16 slots | Windows/Linux.Access the M.2 PCIe SSDs individually | Software RAID support for RAID 0/RAID 1/JBOD.Vented full-profile bracket pre-installed and low-profile bracket included.Dual M.2 NVMe / AHCI | PCIe 4.0 x8 or x16 Slot | Bifurcation

Dual M.2 PCIe SSD Adapter Card - x8 / x16 Dual NVMe or AHCI M.2 SSD to PCI Express 3.0 - M.2 NGFF PCIe (M-Key) Compatible - Supports 2242, 2260, 2280 - JBOD - Mac & PC (PEX8M2E2).BACKWARD COMPATIBILITY: Compatible w/ PCIe 1.0 & 2.0 and x8 or x16 slots, PCIe bifurcation is not required. Works with all workstation and server OS's such as Windows, Linux, and macOS incl. legacy..HIGH PERFORMANCE: Install 2 PCIe 3.0 M.2 SSDs (NVMe or AHCI) into your workstation or server for read/write speeds up to 3GB/s and 2.8GB/s for single-drives or 2.4GB/s and 1.42GB/s (per drive) for 2.RAID FUNCTIONALITY: M.2 PCI Express adapter lets you use SSDs individually or in a storage pool using OS or 3rd party RAID software (RAID 0, 1, SPAN, JBOD) for tiered/hybrid storage.VENTED DUAL-PROFILE BRACKETS: Pre-installed full profile bracket with low-profile (half-height) bracket in box & vented design for better cooling, avoiding drive throttling and improving reliability..WIDE COMPATIBILITY: Dual M.2 PCIe SSD adapter card was extensively tested to ensure compatibility w/ Samsung 970 evo, 950 Pro, SM951, & other 2242, 2260, 2280mm PCIe M-Key M.2 NGFF SSDs (NVMe or AHCI).PCI Express 3.0 M.2 SSD Adapter Card | For PCIe NVMe and PCIe AHCI M.2 SSDs

Get ultra-fast data access by adding an NVMe U.2 SSD to your computer. This U.2 to PCIe adapter lets you add a high-speed, U.2 (4-lane PCIe) 2.5" NVMe SSD, such as the Intel® 750 Series drive, to a PC with an available x4 PCI Express expansion slot. You can mount the PCIe U.2 drive directly onto the adapter, giving you an easy and convenient way to improve your system performance and expand overall internal storage. Boost your system speed and performance The expansion card lets you take full advantage of the fast performance and compact size of PCIe U.2 internal solid-state drives. The adapter connects directly to your computer motherboard to support an NVMe U.2 PCIe-based SSD through ultra-fast x4 PCIe. With the U.2 PCIe-based drive in place, the adapter gives your computer a significant speed boost. Easy to install The expansion card is equipped with a full-profile bracket and doesn't require an adapter cable for installation, this helps to reduce clutter and simplifies system builds. The drive connects directly to the SFF-8639 connector on the adapter, and the adapter connects directly to the computer motherboard. The adapter is compatible with PCIe 3.0 motherboards and is also backward compatible with PCIe 2.0 and PCIe 1.0. The PEX4SFF8639 is backed by a StarTech.com 2-year warranty and free lifetime technical support..Boost system speed and performance by adding a PCIe NVMe U.2 SSD to your PC.Simplify system builds with a U.2 to PCIe adapter that mounts your SSD directly to the adapter, with no need for adapter cables.PCI Express 3.0 x4 lane host adapter.Compatible with x4 PCIe 3.0 motherboards, and backward compatible with PCIe 2.0 and PCIe 1.0.OS independent with no drivers required, for a fast, hassle-free setup

M.2 NVMe SSD to PCIe x4 Removable Mobile Rack for PCI Express Expansion Slot, Tool-less Installation, PCIe Hot-Swap Drive Bay.REMOVABLE M.2 DRIVE BAY: Use an available PCIe 4.0 x4 expansion slot to install, remove, or swap PCIe M.2 SSDs (NVMe or AHCI); Supports 2230, 2242, 2260, and 2280 M-Key M.2 NVMe SSDs; Capable of reaching high-performance read/write speeds up to 64Gbps.TOOLLESS INSTALLATION: Install an M.2 drive into the drive tray or insert the tray into the drive bay without the need for tools; Power/Activity LED indicator; Drive tray features a latching mechanism and is lockable for secure installation (2 keys incl.).OPTIMAL PERFORMANCE: Vented stainless steel frame, bracket, and tray with thermal pads and aluminum cover aid heat dissipation; Anti-vibration springs on the drive tray reduce shock or vibrations; Optional screw for stability; Incl. Low-profile bracket.COMPATIBILITY: No drivers or software required and works on any operating system including Windows, Windows Server, Linux; Supports PCI Express 4.0 and 3.0 motherboards with an available x4, x8, or x16 slot; Not compatible with M.2 SATA drives.HOT SWAP: Additional drive trays (TR-M2-REMOVABLE-PCIE, sold separately, coming soon) offer flexibility/convenience when working with multiple drives; PCIe hot swap support is dependent on the motherboard, check with the manufacturer to confirm support.Additional drive trays (TR-M2-REMOVABLE-PCIE, sold separately) provide flexibility and convenience when managing multiple M.2 drives. NVMe PCIe hot swap support is dependent on the motherboard. Verify hot swap support with the manufacturer of the motherboard, and for instructions regarding how to enable this feature..The vented stainless-steel frame and tray with thermal pads aids heat dissipation, ensuring optimal and reliable performance while reducing potential thermal throttling. Anti-vibration springs on the drive tray reduce impact during installation and enhance the overall stability and longevity of the drive. A low-profile bracket is included for small form-factor systems..Install an M.2 drive into the drive tray and insert the tray into the drive bay, without the need for tools. The drive tray features a power/activity LED indicator to monitor drive status. A latching mechanism with optional lock (2 keys included) deters the theft of mission-critical data storage devices..Package Contents:M.2 to PCIe Adapter Card,1 x Low-Profile Bracket,1 x M.2 Drive Tray,1 x Set of Keys,1 x Quick-Start Guide.StarTech.com M.2 NVMe SSD to PCIe x4 Removable Mobile Rack for PCI Express Expansion Slot, Tool-less Installation, PCIe Hot-Swap Drive Bay - Utilize a PCIe x4 expansion slot as a removable drive bay for M.2 SSDs; Supports up to 2280 M-Key M.2 NVMe SSDs; Tool-less installation; Lockable Drive Tray (2 keys incl.); Tray with thermal pads/anti-vibration springs; No drivers/software required

Install an SSD into a desktop or server using an available PCI Express 4.0 slot. The pre-installed full-profile bracket and included drive mounting screws enable the connection of a U.3 NVMe drive to a PCIe slot, avoiding the need for a drive backplane or additional cables. This adapter is not compatible with U.2 drives. The StarTech adapter card is backward compatible with motherboards that feature x4, x8, and/or x16 PCIe 3.0 slots. The U.3 adapter requires no additional drivers or software and works with all workstation and server operating systems, such as Windows, Windows Server, and Linux..To enable ultrafast data access, add a 2.5" U.3 NVMe SSD into a PCIe 4.0 x4/x8/x16 slot in a desktop or server using the included screws.Pre-installed full-profile bracket and included drive mounting screws enable the connection of a U.3 drive to a PCIe slot, without the need of a drive backplane or additional cables.Supports SFF-TA-1001 drives up to 15mm in height; not compatible with U.2 drives.Works with all workstation and server operating systems such as Windows, Windows Server, and Linux.Vented full-profile bracket and a large cutout in the PCB allow for better airflow and heat dissipation, which helps maintain optimal and reliable performance while reducing potential thermal throttling.Backward compatible with PCIe 3.0 motherboards that have an available x4, x8, or x16 PCIe slot.Box contains: adapter, four drive mounting screws, quick start guide.2-year manufacturer limited warranty

StarTech eight-port SATA III (6Gbps) controller enables you to add eight SATA 6Gbps hard drives (HDDs) or solid State Drives (SSDs) to your computer system or server via an available PCIe x4 card slot. The card supports SATA III and PCI-Express Gen 2 Specifications and four SATA controllers to deliver a high-performance data storage solution..PCI Express SATA expansion adapter card with four host controllers.Maximum data transfer rate is 6Gbps.Card type: standard profile (LP bracket incl.) with eight ports; internal ports: SFF-8087 (36 Pin, Internal Mini-SAS).OS compatibility: Windows 7, 8, 8.1, 10; Windows Server 2003, 2008 R2, 2012, 2012 R2, 2016, 2019; macOS 10.10 to 12; Linux 2.6.32 and up.2-year manufacturer limited warranty

Convert and connect a PCIe M.2 NVMe/AHCI SSD to a 2.5" form factor to install in U.3 drive bays/backplanes. Compatible with U.3 (SFF-TA-1001) host interfaces; M.2 to U.3 adapter is TAA compliant. Change the form factor of a 2242, 2260, or 2280 M.2 NVMe drive while preserving the read and write speeds. No chipset design ensures no loss in performance when adapting to 2.5". M.2 to U.3 Host Adapter works with all operating systems including Windows, macOS, and Linux. M2 to U.3 Adapter requires no additional drivers or software. Includes drive and adapter mounting screws for an efficient installation..Convert and connect a PCIe M.2 NVMe/AHCI SSD to a 2.5" form factor with this adapter.Designed for M.2 NVMe drives.Internal Interface: M.2 NVMe; external Interface: U.3 2.5" form factor.Drive type: PCIe M.2 NVMe/AHCI SSD.Comes in red.Change the form factor of a 2242, 2260, or 2280 M.2 NVMe drive while preserving the read and write speeds.Works with all operating systems including Windows, macOS, and Linux.Open frame design enables support for M.2 drives with larger heatsinks, and allows for better airflow.Supports PCIe 4.0 and lower drives.Meets or exceeds the RoHS, TAA, and WEEE standards.2-year manufacturer limited warranty

Experience blistering fast data transfer speeds while expanding your storage with the Hyper M.2 x16 Gen5 Card from ASUS. With four M.2 2242/2260/2280/22110 slots with Q-Latch, you can install separately purchased PCIe 5.0 x4 NVMe SSDs. Then, installing this card into an available PCIe 5.0 x16 slot allows you to transfer up to 512 Gb/s with compatible Intel or AMD motherboards and processors..Type of Processor Compatibility, Motherboard & Accessory Type & Use: PCI Express 5.0 x16.System Speed: support data transfer rates up to 512 Gbps.Graphics Output: PCIe 5.0 x16 interface.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Add the fast performance of an M.2 NVMe SSD to your desktop computer or server by converting the drive through a U.2 (SFF-8639) compatible interface on your motherboard. This PCI Express M.2 to U.2 adapter makes it easy to install an M.2 PCIe NVMe SSD into your desktop PC or server, and connect to the drive through an available U.2 (SFF-8639) compatible interface on your motherboard.Upgrade your system cost-effectively.Increase your system speed and performance cost-effectively, by adding an M.2 PCIe NVMe SSD to your PC or server.Adapter supports one M.2 PCIe NVMe SSD (M-Key).U.2 (SFF-8639) host interface

Introducing the ToughArmor MB720MK-B V3, a rugged and removable quad M.2 PCIe 4.0 NVMe SSD enclosure designed for a 5.25" optical drive bay. This powerful enclosure supports blazing-fast data transfer rates of up to 64Gbp/s through the OCulink (SFF-8612) interface and is compatible with Tri-mode host cards. Installing or removing M.2 NVMe SSDs has never been simpler, thanks to the removable drive trays with tool-less adjustable M.2 drive lockers. You can easily swap drives without having to open your computer case or mess with mounting screws. To ensure top-notch cooling performance, the MB720MK-B V3 comes equipped with dual cooling fans in the back, effectively dissipating the heat generated by high-speed PCIe 4.0 SSDs. Moreover, each drive tray features an extra-large heatsink lid and thermal pad, keeping your SSDs at optimal temperatures. As part of ICY DOCK's toughest line, the MB720MK-B V3 boasts a full metal construction and metal barrel key locks, providing maximum protection for your valuable drives..Rugged and removable SSD enclosure specially designed to fit into a 5.25" optical drive bay.Fits 4 x M.2 NVMe SSDs of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into any standard external 5.25" optical drive bay.Rugged, full-metal enclosure meets flammability requirements.Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more).Connects with 4x OCulink (SFF-8612) (NVMe host required).Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay.Patent-pending screw-less M.2 adjustable locker securely holds all length drives.Removable and tool-less drive installation design for easy drive maintenance.Integrated large, high-efficiency heatsink and ample ventilation for excellent cooling performance.Features a two-segment key lock for additional physical security.Eagle-hook tray latch securely holds the drive tray inside the enclosure.Supports SATA 15-pin and OCuLink cables with locking latch design for a secure connection.EMI Grounding protects SSDs from electrical damage.5-year manufacturer limited warranty

Introducing the Icy Dock ToughArmor MB873MP-B V2, a rugged and removable 8 x M.2 PCIe 4.0 NVMe SSD enclosure specially designed to fit into a 5.25" optical drive bay. This powerful enclosure offers exceptional performance, supporting lightning-fast data transfer rates of up to 64 Gbps via the OCuLink (SFF-8612) interface, and is compatible with Tri-mode host cards. It is made out of heavy-duty full-metal construction and uses removable M.2 SSD trays that support tool-less drive installation/removal for effortless drive maintenance. In addition, the MB873MP-B V2 is equipped with dual 40 x 20mm cooling fans in the rear to remove the heat generated by the high-speed PCIe 4.0 SSD for the best cooling performance..Rugged and removable SSD enclosure specially designed to fit into a 5.25" optical drive bay.Supports 8 x PCIe M.2 NVMe SSDs of all lengths - 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Installs into 1 x standard external 5.25" optical drive bay.Rugged, full-metal enclosure meets flammability requirements.Uses 8 x OCuLink (SFF-8612) to connect, pin-out defined by SFF-9402 Rev 1.1.Supports PCIe 4.0 specifications with transfer rates up to 64Gbps per drive bay.Provides support for Tri-Mode controller cards from leading brands like Broadcom, Areca, and others.Powers 8 x M.2 SSDs through 2 x 15 - pin SATA power connectors.Features a removable drive tray with tool-less drive installation for easy drive maintenance.Equipped with high-performance dual 40 x 20mm cooling fans.Huge heatsink trays with thermal pads included dispersing heat from the drive.Anti-Vibration technology - creates a safe environment for SSDs.Active Power technology - saves power by shutting off the enclosure when no drive is installed.EMI Grounding protects SSDs from electrical damage.Drive ID plugs are included, so you can keep track of your drives.Eagle-hook tray latch securely holds the drive tray inside the enclosure.Supports SATA 15-pin and OCuLink cables with a locking latch design for a secure connection.2 x SATA 15pin power cables are included.Well-suited for high-performance PCs, compact servers, workstation PCs, and data centers where efficient storage utilization is crucial.5-year manufacturer limited warranty

Icy Dock EZConvert converts an M.2 NVMe PCIe SSD into the exact dimensions and port locations as a standard 2.5" U.2 (SFF-8639) NVMe SSD without using any tools or screws for drive installation. Can be installed anywhere that accepts a bare 2.5" U.2 NVMe drive, such as a U.2 backplane, 2.5" mounting bracket, or ICY DOCK U.2 NVMe removable enclosures/mobile racks. The sturdy aluminum heat sink housing protects the delicate M.2 circuit board from bumps and drops, and work perfectly with the included thermal pad for optimal heat dissipation to keep your drive running cool, even under heavy load..Convert your M.2 NVMe SSD into the 2.5" U.2 NVMe form factor with 0.37"H.Dimensions: 0.37"H x 2.76"W x 3.98"D.Made of ABS plastic and aluminum in black.Exact same dimensions, port locations, and screw-hole locations as a standard U.2 drive.Accepts any M.2 PCIe NVMe SSD.10000 insertion/removal cycle rated U.2 connector.Supports full Nvme bandwidth specification of 64Gbps.100% toolless and screwless M.2 drive installation.Dual-function aluminum heat sink and lid for optimal protection and cooling performance.Lower housing ventilation hole can pop out for additional airflow and improved cooling.Supports U.2 (SFF-8639) cables.Fits into any U.2 backplanes, 2.5" mounting brackets, or U.2 NVMe SSD enclosure.3-year manufacturer limited warranty

The Icy Dock ToughArmor MB720M2K-B is a quad M.2 NVMe ruggedized removable enclosure. With this enclosure, your NVMe SSD no longer requires to be installed onto the motherboard or even a riser card, which is typically held with a tiny screw. Now it can be installed and accessed from the comfort of the frontal bay of the computer. In addition, it comes with the brand's patent-pending M.2 adjustable drive locker, which can easily place your drive without any tools or screws..Removable internal SSD mobile rack is designed to house up to four M.2 PCIe NVMe SSDs, supporting blazing PCIe x4 transfer speed up to 64Gbps via Mini-SAS HD (SFF-8643).Fits four M.2 NVMe SSDs of all lengths, including 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110).Ruggedized full-metal enclosure that meets the flammability requirements.Adjustable drive locker holds all drives securely.Installs into any standard external 5.25" device bay.Uses four Mini-SAS HDs (SFF-8643) to connect, requires an NVMe host.Supports the full NVMe bandwidth specification of 64Gbps per channel.Integrated extra-large high-efficiency heat sink and ample ventilation for excellent passive cooling.Features a two-segment key lock for additional physical security.Eagle-hook tray latch securely holds the tray inside the enclosure.EMI grounding protects SSDs from electrical damage.Anti-vibration technology (AVT) reduces noise and protects against environmental damage.Toolless drive installation design for easy drive maintenance and system upgrading.Package contents: enclosure, user manual, screws, thermal pads.Meets or exceeds the CE, RoHS, and REACH standards.5-year manufacturer limited warranty

The Next Generation NVMe Mobile Rack: The MB601VK-B is ICY DOCK's next generation PCI-E based mobile rack with ability in supporting Intel, Micron, and Seagate ultra high speed 2.5" U.2 NVMe solid-state-disk in an external 3.5" floppy drive bay. Superior Performance : Built with the next generation U.2 interface, MB601VK-B offers up to 32Gb/s of bandwidth and supports 2.5" U.2 NVMe SSD, SAS and SATA interface 2.5" solid state drives or hard drives. The superior performance of MB601VK-B provides the maximum amount of transfer speed for the most data intensive tasks; such as real time large database transfers and refreshes, massive bulk data swaps from multiple networks, VMware providing virtual operating systems for mulitple computers, and large scale editing of large multimedia assets of virtual reality, video, music, and other graphics between multiple workstations. Convenient Utility Accessibility: The EZ Slide Mini trays supports U.2 hot-swap feature, which makes U.2 NVMe SSD interchangeability and maintenance completely hassle-free. With a simple swap of the SSD / HDD, your overall down time is greatly reduced especially when a drive is needed to be switched. The tray is also designed to accommodate 7 to 15mm height hard drives and SSD, creating a 2.5" hot swap bay for U.2 NVMe SSD or any standard SAS / SATA hard drives and SSDs. While the tray is not inside the MB601VK-B, the Anti-Dust Flap feature helps prevent dust from entering into the mobile rack. The front of the MB601VK-B includes a status LED when the drive is powered on, off and accessed. Active Power Technology (APT) allows the status LED to be on only when a hard drive is inserted into the enclosure. For drive security, the eagle-hook lock system on the tray makes sure your hard drives will not eject when not needed. Additionally, the 2 segment key lock provides extra protection to theft of hard drives as well as safeguards any sensitive data. Full Metal Protection: Making sure that the material used is designed in a way where it can be relied upon for many years after its deployment, the MB601VK-B is constructed out of heavy duty metal throughout the entire device and is capable of holding up in the harshest environments. With the Full Metal design, the ToughArmor is perfect for industrial, military and medical devices that may require a flammability rating as the full metal material is considered to be compliant with flammability requirements..Fits 1 x 2.5" U.2 NVMe SSD or 2.5" SAS / SATA SSD / HDD.NVMe U.2 host is required to accept NVMe SSD, SAS or SATA SSD / HDD.Fits any external 3.5" drive bay or floppy bay