Portable Power Meter
6 results
Plugable USB C Power Meter Tester for Monitoring USB-C Connections up to 240W Digital Multimeter Tester for USB-C Cables, Laptops, Phones, Chargers - Driverless.At a Glance - USB C Tester monitors USB-C power and charging up to 240W. Measure voltage and amperage. Visualize the directional flow of electrical current. Updated OLED display is brighter and easier to read. New orientation button lets you flip the screen 180 degrees.Bidirectional - USB power meter can be connected in either orientation, allowing for the full range of USB Extended Power Range (EPR) voltage from 5 to 48V (4.5V-50V, 50mA-6.5A operating range).Broad USB Support - Used as a data and power quality meter, device allows USB data pass through, USB-C Alt Mode video, USB-C charging. Use USB-C tester with USB-C docking stations, chargers, accessories, etc. Not compatible with Thunderbolt 3 devices.Small and Tough - Small enough to go anywhere you need a USB C voltage meter. Even fits most phones and tablets without removing protective case. Strengthened USB-C connections ensure it's sturdy enough to be your go-to USB C power tester.Warranty and Support - Questions only an expert can answer? When you contact our support team, you’re connecting with the engineers who design our devices. Every Plugable product is backed by our Seattle-based support team–even before purchase, and a 2-year limited parts and labor warranty after purchase
The Fluke Networks® SFPOWERMETER SimpliFiber Pro optical power meter has USB port for connectivity. It measures 6.4" x 3.2" x 1.5". The power meter has InGaAs detector and comes with SC adapter..Dimensions: 6.4"H x 3.2"W x 1.5"D.Interface/ports: USB, one SC port.Fiber wavelength: 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm, 850 nm.Battery chemistry: Alkaline.InGaAs detector, USB connectivity.Weight: 11.5 oz..Detector type: InGaAs, calibrated wavelengths: 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm.Wavelength accuracy: 850 nm: +/-30 nm, 1300 nm: +/- 20 nm, Spectral width (FWHM): 850 nm: 50 nm (typical), 1300 nm: 135 nm (typical).Power display units: dBm, mW, Micro W, Minimum output power: 850/1300 nm: -20 dBm, Power output stability: +/- 0.1 dB over 8 hours.Reference individually set for each wavelength.Single-port, simultaneous dual wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record.Additional 1490 and 1625 nm wavelengths extends product use to broader applications.Min/max capability automates precision tracking of intermittent power fluctuations.Large internal memory save 1000 results which enables continuous testing and recording.Includes simplifiber SFPOWERMETER pro optical power meter, SC adapter.Certifications and standards: EMI, RFI, EMC.Fluke Networks® SimpliFiber® Pro optical power meter has large internal memory that saves up to 1000 results which enables continuous testing and recording.
The Fluke Networks® SimpliFiber® FTK1000 multimode fiber verification kit in yellow, includes pro optical power meter, 850/1300 multimode source, carrying case and SC power-meter adapter. The single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record. The CheckActive™ feature emits an audible tone and displays an icon when it detects a live fiber and the FindFiber™ remote id enables one individual to identify cable connections or routings especially useful at patch panels..Basic multimode fiber verification kit.Dimensions: 5.6"H x 3.2"W x 1.6"D.Comes in yellow color.Dual wavelength testing and tests multimode and singlemode fiber.Measures optical power and loss at 850 nm and 1300 nm using the 850/1300 source and meter.Measures optical power and loss at 1310 nm and 1550 nm using the 1310/1550 source calibrated wavelengths in the power meter at 1490 nm and 1625 nm.Offers quick remote identification of cabling runs with find fiber remote IDs.Conduct pre testing and qualify cabling runs.Single port testing for simple network connection.Ruggedly built for demanding field use.Auto senses source wavelength.Operating temperature: 14 deg F to 122 deg F (-10 deg C to 50 deg C).Weight: 1.8 oz.
The Plugable USBC-VAMETER voltage and amperage meter in black, is compatible with USB-C devices. It has compact aluminum design that is perfect for diagnosing and monitoring USB-C devices on the go with no extra equipment needed. It measures voltage and amperage as well as direction of electrical current flowing through it. It has USB 3.1 type C male connector on the first end and USB 3.1 type C female connector on the second end. The meter allows quick and easy monitoring of USB-C power and charging. It is bidirectional and connected in any direction that supports the full range of USB-C power delivery voltage from 5 to 20 V..Voltage and amperage meter that measures voltage and amperage along with the direction of electrical current, comes in black color.Terminal type 1: USB 3.1 type C male.Terminal type 2: USB 3.1 type C female.Compatibility: USB C devices.Allows quick and easy monitoring of USB C power and charging, measures voltage and amperage as well as direction of electric current.Meter is bidirectional hence can be connected in any direction and supports full range of USB C power delivery voltage from 5 to 20 V.The compact aluminum design makes this the perfect companion for diagnosing and monitoring USB C devices on the go with no extra equipment required.Has aluminum construction for durability.Features bright and easy to read OLED screen.Testing for USB C port spec compliance such as a VBUS hot condition, voltage drop under load and etc
The Fluke 325 True RMS Clamp Meter is a powerful, compact tool designed for professional electricians and technicians who require accurate electrical measurements in tight spaces. Ideal for both residential and commercial applications, this versatile meter measures AC/DC current up to 400 A, voltage up to 600 V, resistance, continuity, frequency, and even temperature, all with True RMS accuracy for reliable readings on non-linear loads. Its slim, ergonomic design allows for easy one-handed operation, while the large, backlit display ensures clear visibility in any environment. With built-in features like data hold, min/max recording, and a wide jaw opening that accommodates conductors up to 30 mm, the Fluke 325 is a dependable solution for diagnosing and troubleshooting electrical systems efficiently and safely..Electrical monitoring tool designed to measure current, voltage, resistance, continuity, frequency, and temperature..The Fluke 325 comes complete with TL75 test leads, a Type K thermocouple for temperature measurements, 2 pre-installed AAA batteries, and a soft carrying case for added portability and protection..The clamp meter measures approximately 8.15 inches in height, 2.95 inches in width, and 1.34 inches in depth (207 mm x 75 mm x 34 mm), offering a compact profile that fits easily in the hand or tool bag..The unit weighs approximately 0.62 pounds (283 grams), making it lightweight and convenient for extended use in the field..Suitable for both residential and commercial electrical environments.
This compact autoranging True RMS clamp meter is capable of measuring AC/DC current and voltage, resistance, frequency, capacitance, duty cycle and temperature. Featuring a 50,000 count backlit LCD display, double molded plastic housing, the R5030 includes diode check and continuity functions and a non-contact voltage detector built into the clamp tip..Measures AC/DC current/voltage, resistance, capacitance, frequency, duty cycle and temperature.50000-count backlit LCD display with low battery and overrange indicators.Built-in non-contact voltage detector with LED indicator.True RMS AC measurements.Display hold and relative mode.Diode test and continuity check functions.Durable double molded plastic housing.Cat. III 600V safety rating.7.9" (h) x 2.6" (w) x 1.5" (d).AC/DC current range of 50.00, 500.0A.AC current accuracy of + or -(2.8% rdg. +30 dgt.).DC current accuracy of + or -(2.5% rdg. +30 dgt.).AC/DC current resolution of 0.01, 0.1, 1A.AC voltage range of 500mV, 5, 50, 500, 750V.DC voltage range of 500mV, 5, 50, 500, 1000V.AC voltage accuracy of + or -(1.0% rdg. +30 dgt.).DC voltage accuracy of + or -(0.1% rdg. +4 dgt.).AC/DC voltage resolution of 0.1mV, 0.001, 0.01, 0.1, 1V.Includes test leads, a thermocouple wire probe, a thermocouple adapter, batteries and a soft carrying case.Compact AC/DC clamp meter with backlit display, built-in non-contact voltage detector and contact thermometer
You May Also Like
The Fluke Networks™ FiberInspector™ FI-500 micro inspection scope has autofocus feature for stable images in few seconds. The large display helps to view singlemode and multimode fiber endfaces. It has built-in flashlight that illuminates dark areas and dense panels. The micro inspection scope in yellow/black color, has rechargeable NiMH battery..Micro inspection scope has autofocus feature for stable images in few seconds.Dimensions: 5.5"H x 3.2"W x 1.5"D display, 4.6"H x 2"W x 0.95"D probe.Comes in yellow/black color.Battery: Rechargeable NiMH, 2 x 1.2 V, 2700 mAh, 3 hrs of continuous probe use and 6 hrs of typical probe use battery life.Magnification: 1x, 2x, 4x display, 200x probe zoom function has 1x, 2x and 4x settings, camera type: 5 MP 0.25" CMOS sensor.Power adapter: 100 - 240 VAC +/- 10%, 50/60 Hz input, 6 VDC, 3 A maximum class II output.Input: USB 2.0 type A.PortBright a built-in flashlight illuminates dark areas and dense panels.Autofocus for stable images in few seconds.Large display to view singlemode and multimode fiber endfaces.Temperature: 0 to 50 deg C operating, -30 to 60 deg C storage without power adapter.Includes 4 tips (1.25mm, 2.5mm, SC, LC), case, rechargeable batteries and universal power adapter.Weight: 0.6 lbs.
Extension Cable w 240W Power Meter.At a Glance - Durable, high-performance 3.3’ (1m) USB-C extension cable (USBC-METER3-1MF) transfers data up to 10Gbps, supports 240W Extended Power Range, Alt Mode video up to 4K 60Hz, and features a digital power meter. It’s an incredibly versatile cable.Ultra High-Speed Charging - Male to female USB-C extension cable delivers up to 240W, Video, and 10Gbps data. Connect it to your current charger and USB C charger cable,to charge even the most power-hungry laptops and devices from farther away. A whole 3.3’ (1m) farther away.Built-In Power Meter - Easy to use, digital read-out to monitor power usage or charging flow of your device in real time, doesn’t sacrifice advanced USB-C features missing from lesser extenders. A braided black cord protects the USB C charging cable. This Type C to Type C cable is built to last.Plugable USB C Extension Cable 3.3 Ft, Digital Power Meter Tester Supports Fast Charging up to 240W, 4K 60Hz Display, 10Gbps Data Transfer
Discover the Fluke 177 True-RMS Digital Multimeter – Precision Meets Performance Experience precision and reliability like never before with the Fluke 177 True-RMS Digital Multimeter. Designed for the discerning electrical maintenance expert, this advanced multimeter is the perfect tool for troubleshooting and repairing a variety of electrical and electronic systems. With its ability to measure True-RMS AC and DC voltage and current, the Fluke 177 ensures accurate readings even in complex electrical environments. Its digital display, featuring an analog bar graph and backlight, provides clear and easy-to-read measurements, making your job easier even in dim lighting conditions. The Fluke 177 is built to last, crafted from durable chemical-resistant polymers, and housed in an ergonomic case with an integrated protective holster. This multimeter is designed to withstand the toughest conditions, ensuring longevity and reliability for years to come. Independently tested for safety, the Fluke 177 is rated for use in CAT IV 600V and CAT III 1000V environments, giving you the confidence to tackle high-voltage tasks. Its compact dimensions and lightweight design make it portable and easy to handle, while the 9V battery provides approximately 200 hours of typical use without the backlight. This multimeter is more than just a tool – it's a productivity enhancer. With features like manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording, you'll be able to work more efficiently and accurately. The Fluke 177 is part of the trusted Fluke 170 Series, renowned for its reliability and performance. When you choose the Fluke 177, you're investing in a tool that delivers unmatched accuracy and dependability. Upgrade your toolkit today with the Fluke 177 True-RMS Digital Multimeter and experience the precision and performance that professionals trust. Elevate your electrical maintenance capabilities and get the job done right every time..The Fluke 177 is a digital multimeter designed for precise measurement of electrical and electronic systems, providing True-RMS readings for AC/DC voltage and current, as well as frequency, capacitance, resistance, continuity, and diode testing..This comprehensive kit comes with the Fluke 177 Digital Multimeter, one pair of test leads with 4mm lantern tips, an installed 9V battery for immediate use, and a quick reference guide to help you get started quickly and efficiently..The Fluke 177 Digital Multimeter is compact and portable, with dimensions of 43 mm in depth, 90 mm in width, and 185 mm in height, making it a convenient tool to carry and use in various environments..Weighing just 420 grams (14.82 ounces), the Fluke 177 Digital Multimeter is lightweight yet robust, ensuring ease of use and transport without compromising on durability or performance.
Fluke Networks® Compact Probe Pic with Cap, Yellow (44600000).Probe pic is perfect to check loose or damaged connections or to spread apart wires for direct access.Comes in yellow color and features high quality nylon construction for durability.Perfect for using the pic end for tracing or pulling wires from a bunch.Insulated tip protects against shorting adjacent components
The Fluke Networks™ Fiber QuickMap™ FQM-100-M-VFL distance and fault locator works on multimode fiber. It helps to locate severe bends, high-loss splices, breaks and dirty connectors in multimode fiber. It also detects live optical signals before it begins testing. The distance and fault locator in yellow/black color, operates with two AA alkaline batteries..Distance and fault locator helps to locate severe bends, high-loss splices, breaks and dirty connectors in multimode fiber.Dimensions: 6.9"H x 3.1"W x 1.5"D.Comes in yellow/black color.Battery: 2 AA alkaline batteries, 1500 tests life.Works on multimode fiber, 50/125 mu m and 62.5/125 mu-m 850 nm output wavelength, measure up to 4921'.Locate severe bends, high-loss splices, breaks and dirty connectors in multimode fiber.Measure and locate high-loss splices, locate the end of a fiber.Find potential sources of high bit error rates caused by reflectance from dirty or poor connections.Detects live optical signals before it begins testing, quick set-up, connect your fiber and press the test button.Find problems quickly, 6 sec test time - no more blind troubleshooting that can waste hours.Change the Index of Refraction (IOR) to improve fiber length accuracy, visible in dark areas, backlighted display turns off automatically.Temperature: 0 to 50 deg C operating, -20 to 60 deg C non-operating, 75 - 95% operating relative humidity.Includes screw on interchangeable SC adapter, UPC-UPC 2 m patch cord, carrying case, guide, safety manual, batteries & VisiFault Visual fault locator.Certifications and standards: Meets RoHS, CE, FCC, CSA standards
The Fluke Networks network testing device will allow you to keep your network running smoothly. It will allow you to easily test twisted-pair cables and trace installed hidden cables. It uses an easy-to-read LED interface and a two-tone generator to let you know whether it detects any problems or defects..Display type: LED.Interfaces/Ports: 1 x RJ-45.Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs.Easy-to-read fault display.Tone generator for tracing installed cables hidden in walls, floors and ceilings.Remote unit enables one-person testing of installed cables.Micromapper's built-in tone generator works with the IntelliTone™ pro probe or any other analog probe, allowing you to trace cable through walls, floors and ceilings.Micromapper also includes a remote unit that allows one person to test installed cabling or patch cords.MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs.Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults in your cable.Generation of two tones for tracing cables and lication hidden cables.Includes: Micromapper and Micromapper remote, patch cable, 6 V alkaline battery and user guide.Weight: 0.28 lbs..Dimensions: 4.93"(H) x 2.05"(W) x 1.18"(D).1 year limited warranty.Fluke Networks Network Testing Device - Powerful and Reliable
Fluke MicroScanner PoE cuts through the confusion of your PoE installation by providing swift and simple PoE verification. The tester detects the available PoE class (0-8) in accordance to the latest PoE standards and displays the voltage from passive PoE sources. Everything cable technicians need to know, including available services (up to 10G Ethernet), cable length, wiremap, cable ID, and distance to fault are all shown on the LCD screen. Built-in IntelliTone digital and analog toning precisely locates virtually any cable or wire pair – even on active networks. The ergonomic design features sleek rubber overmold to enhance grip and ruggedness. Includes MicroScanner POE (Power over Ethernet) cable verifier with detachable wiremap adapter, getting started guide (10 languages), two AA alkaline batteries, carry pouch, and one-year warranty..This cable tester PoE cuts through the confusion of your PoE installation by providing swift and simple PoE verification.Includes: getting started guide (10 languages), two AA alkaline batteries, carry pouch.Works on two AA alkaline batteries.Operating temperature: 32-113 degrees Fahrenheit.Display network switch speeds capabilities up to 10G.Locate and trace cable with toning (probe sold separately)
Fluke Networks? Pro3000™ Analog probe is easy-to-use with adjustable volume control dial and "quick-twist" tip for easy replacement. Probe features recessed on/off button that helps prevent accidental turn on when placed in the pouch..Interfaces/ports: RJ-45.Tone and trace wire on non-active networks.SmartToneTM technology provides five distinct tones for exact pair identification.Sends loud tone up to 10 miles (16 kilometers) on most cables.Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures.Angled bed-of-nails clips allow easy access to individual pairs.RJ-11 connector is ideal for use on telephone jacks.Attach nylon pouch (included in kit) to your belt for easy transport.Battery: 9 V alkaline.Case dimensions: 2.7" x 2.4" x 1.4".Analog prob user interface: On/off pushbutton, volume dial, Replaceable tip, 3.5mm earphone jack.Solid Frequency: 1000 Hz nominal, alternating frequency: 1000/1500 Hz nominal, over voltage protection: 60 VDC in toner/polarity node.Output power in tone mode: 8 dB min to 600 Ohms.Output voltage level in continuity mode: 8 VDC with fresh battery.Fluke Networks® Pro3000™ Analog probe features a loud large speaker that amplifies the tone through walls, enclosure, wood or plaster and uses alkaline battery.
MS2-FTK MicroScanner copper and fiber cable verifier kit helps find common errors by displaying graphical wiremap, pair lengths, distance to fault, and far-end device. Integrated RJ11, RJ45, and coax test ports support many types of low-voltage cable testing with no need for adapters. Test and verify your fiber connections with the SimpliFiber Pro power meter and light source..Network copper and fiber test kit measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports.Dimensions: 1.4"H x 3"W x 6.4"D.Comes in black and yellow.Kit includes: MicroScanner cable verifier and SimpliFiber Pro (FTK1000) fiber test kit (SimpliFiber Pro optical power meter, 850/1300 multimode source, magnetic strap attachments, carrying case, and SC power-meter adapter).Test connectors: shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs; MicroScanner2: F-connector for coaxial cable.Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs.Features a monochrome LCD with backlight.MicroScanner solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices.MicroScanner PoE: solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco's Universal Power over Ethernet) compatible PoE devices.MicroScanner2 detects the advertised speed of 802.3 Ethernet ports with speeds of 10Mbps, 100Mbps, and 1Gbps.Verifies media services: 10/100/1000 Ethernet, POTS, and PoE.Tone generator produces 500kHz digital, 400kHz and 1kHz analog tones.Supports toning and cable mapping with a Fluke Networks digital IntelliTone probe
The Fluke Networks® FTK1475 portable fiber verification kit includes implifiber Pro multimode and singlemode PMLS, Visifault, two findfibers, findfiber remote ID, three power meter adapters, reference guide, carrying case, NFC-KIT-BOX cleaning kit, 1.25 mm swabs and USB interface cable. Kit helps to verify optical loss and power levels at 850, 1300, 1310 and 1550 nm, inspect fiber end-faces, locate cable faults..Fiber verification kit has advanced time-saving features.Complete fiber verification kit is for contractors and network technicians.Use this kit to verify optical loss and power levels at 850, 1300, 1310 and 1550 nm, inspect fiber end-faces, locate cable faults.Include: Simplifiber Pro multimode and singlemode PMLS, Visifault, two findfibers, findfiber remote ID, USB interface cable.Include: Three power meter adapters (SC, ST and LC), reference guide, carrying case, NFC-KIT-BOX cleaning kit, 1.25 mm swabs
Analog tone and probe is the best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone technology..Interfaces/ports: Tone mode, 1 x RJ 11.Material: Copper.Storage temperature: 40 - 158 deg F.Humidity range operating: 5 - 95% (non condensing).Connectors: BNC, RJ 11.Output voltage level in continuity mode: 8 Vdc with fresh battery, over voltage protection: 60 VDC in toner/polarity mode.Frequency: 1000/1500 Hz nominal, battery: 9 V alkaline.On/off push button.Loud large speaker amplifies tone through walls, enclosure, wood or plaster.Tests, tools and measurements: Toning.Quick twist tip for easy replacement, easy to use adjustable volume control dial.Includes: analog toner, probe.Application/usage: Cable testing.SmartTone provides five distinct tones for exact pair identification.Loud tones can be send up to 10 miles (16 kilometers) on most cables, this tone change you hear through the probe positively verifies the correct wire pair.Warranty: 18 months limited.Fluke Networks Pro3000 Series Analog Tone and Probe Kit - Identify Inactive Lines Fast
The Fluke Networks® NFA-LC-SINGLE LC interchangeable adapter is suitable for use with Fluke SimpliFiber Pro optical power meter and fiber test kit. This adapter features LC network connector on first end with fiber optic type..LC interchangeable adapter for optical power meter.Connector: LC network connector on first end.Compatible with SimpliFiber Pro optical power meter.Interchangeable adapter features LC network connector on first end with fiber optic type and compatible for SimpliFiber Pro optical power meter.
The MicroScanner PoE cable verifier validates and troubleshoots your Industrial Ethernet copper cabling, helping to reduce down time in time-sensitive industrial networks. It performs continuity tests on all wires in a few seconds and displays the results graphically, so you can see opens, shorts, and crossed wires. The MicroScanner PoE helps make installation, maintenance, and troubleshooting on IT, security, PoE lighting, Ethernet-based HVAC devices, and IP-based building automation systems easier. Its oversized, backlit LCD screen displays clear results in any light or complete dark with intuitive icons and support of Class 0 to 8 PoE..PoE cable verifier validates and troubleshoots your Industrial Ethernet copper cabling, helping to reduce down time in time-sensitive industrial networks.Works on two AA alkaline batteries.Operating temperature: 32-113 degrees Fahrenheit.Reports PoE class (0-8), injector voltage, switch speed up to 10G.Shows wire map, length, cable ID, and distance to fault.Trace cable or wire pairs with the included IntelliTone Pro 200 probe.Includes Remote IDs to determine network layout quickly
Multimode Fiber Verification Kit with Visifault - Includes Simplifiber Pro optical power meter, 850/1300 multimode source, Visifault VFL, FindFiber Remote ID source, Magnetic strap attachments, and carrying case; SC, ST, and LC power meter adapters also included.Multimode Fiber Verification Kit with Visifault.Networking Accessory.Part Number: FTK1200
The most essential tools for electrical and telecom technicians in our sleek form-fitting PVC dur-a-grip tool pouch - holds your tools securely inside, even upside down..All the tools you need (in one pouch) to cut, strip, clean and make connections.Application/usage: Six tool kits combinations available for a multitude of applications.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.D914 and D814 industry standard punchdown tools make for solid terminations.All kits include ergonomically designed Dur a Grip pouch for convenient tool storage on belt.Cut and strip wire cleaner and faster with the electricians D snips.Includes: D814 impact tool, electricians D Snips, cable stripper, Eversharp 66/110 cut blade, probe pic, carrying case.Fluke Networks Pro-Tool Kit - Six Tools in One Place
Fluke Networks® MS2-KIT MicroScanner2 Professional kit includes MicroScanner2 cable verifier with main wiremap adapter, remote identifiers #2-7 and IntelliTone Pro 200 probe. Comprises of shielded twisted-pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter and F Coax push on patch cord for effective detection. Comes with accessory soft pouch for user convenience. Features two AA alkaline batteries and a 9 V alkaline battery for long working of the verifier. Kit has MicroScanner2 getting started guide, MicroScanner2 owners CD, IntelliTone Pro getting started guide and IntelliTone Pro owners CD for trouble-free usage of the device. All the components come in a deluxe Fluke Networks carry case for added convenience..MicroScanner2 professional kit is suitable to verify voice/data/video cable and services.Measures 6.4"H x 3"W x 1.4"D.Supports copper media for high speed transmission.F connector, RJ-11, RJ-45 interfaces/ports for flexible connectivity.FTP, SSTP, UTP cables for long distance transmission.Distance to fault, Length, PoE, speed test copper cables to 1000Base-T, Wiremap tests, tools and measurements.Requires operating temperature of 32 - 123 deg F, storage temperature of -4 - 140 deg F and 90 percentage relative humidity.Operates at altitude 4000 m (operating) and 12000 m (storage).Monochrome, backlight LCD display provides brighter images.Locates virtually any cable or wire pair with IntelliTone digital and analog toning.Rubber over mold enhances grip and increases ruggedness.Contains accessory soft pouch, 2 x AA alkaline batteries, 1 x 9 V alkaline battery, MicroScanner2 getting started guide, owners CD.Contains cable verifier with main wiremap adapter, remote identifiers, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord.Meets N10140 C-Tick EMC standard, FCC Part 15 Class A, CE European Union Directives.Weighs 0.8 lbs.Comes with 1 year warranty.Fluke Networks® MicroScanner2 Professional kit tests voice/data/video cable/services with the help of a revolutionary user interface. Includes essential verification components.