Power Over Ethernet Wireless Access Points

The Cisco Catalyst access points are the next generation of enterprise access points. They are resilient, secure, and intelligent. We are more dependent on our wireless networks than ever before. Additional devices connect to the network every year, and the Cisco Catalyst access points will provide a seamless experience anywhere for everyone. Going beyond the Wi-Fi 6 (802.11ax) standard, the access point provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending intent-based network and perfect for networks of all sizes, the Cisco Catalyst scales to the growing demands of IoT while fully supporting the latest innovations and new technologies and is a leader in performance, security, and analytics. The Cisco Catalyst access points, paired with Cisco DNA, are enterprise-class products that will address your current and future needs. These access points are the first step in updating your network so that you can take better advantage of all of the features and benefits that Wi-Fi 6 provides..Access point for indoor environments, with internal antennas provides a seamless experience anywhere for everyone.Dimensions: 8.5"H x 8.5"W x 1.7"D.Comes in white.Wi-Fi 6 (802.11ax) delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT.Features software-defined radio (SDR) that can perform advanced RF spectrum analysis and delivers other features, such as Cisco CleanAir, wireless intrusion prevention system (wIPS), and DFS detection.Orthogonal frequency-division multiple access (OFDMA) based scheduling splits the bandwidth into smaller chunks called resource units (RUs), which can be allocated to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting four spatial streams, multi-user, multiple-input, multiple-output (MU-MIMO) enables access points to split spatial streams between client devices, to maximize throughput.Spatial reuse allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.Target wake time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis.Flexible radio assignment allows the access points to intelligently determine the operating mode of serving radios based on the RF environment.Dual 5GHz radio support enables both radios to operate in 5GHz client serving mode, allowing industry-leading 5.2Gbps (2 x 2.6Gbps) over-the-air speeds while increasing client capacity.Application hosting helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks.Provides uplink speeds of 2.5Gbps, in addition to 100Mbps and 1Gbps.Features Integrated Bluetooth Low Energy (BLE) 5 radio to enable IoT use cases such as location tracking and wayfinding.Enables edge computing capabilities for IoT applications on the host access point.Creates an optimal mobile experience for iOS devices on corporate networks based on Cisco technologies.Lifetime manufacturer limited warranty

The AP 330 is WatchGuard's all-purpose Wi-Fi 6 access point and is the ideal choice for mid-density indoor environments of all sizes to utilize the most secure WPA3 encryption for a seamless experience. Includes 2x2 radio scanning optimized for Wi-Fi 6 with six internal antennas. Maximum TX power delivers 22 dBm and a 2dBi antenna gain with one Ethernet port supporting up to 2.5 Gbps. These Wi-Fi 6 access points deliver a maximum data rate for a seamless wireless experience by supporting up to 1.2 Gbps on the 5 GHz band and 574 Mbps available on the 2.4 GHz band. WatchGuard’s AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points..The WatchGuard AP330 operates on dual bands: the 2.4 GHz and 5 GHz frequencies. It is designed for medium-density indoor environments, such as offices, schools, and retail spaces, providing reliable and high-efficiency Wi-Fi 6 connectivity..It supports the Wi-Fi 6 (802.11ax), standard up to 1.2 Gbps on the 5 GHz band and 0.574 Gbps on the 2.4 GHz band..The WatchGuard AP330 supports PoE (Power over Ethernet) 54V DC 802.3at (PoE+).Supports high-efficiency wireless connectivity with WPA3 encryption..Connector, Port or Interface Types are 1 x 2.5 Gbps Ethernet port (PoE+), 1 x USB port (currently not in use), 1 x RJ45 serial console port..Included Components are Access point unit, mounting hardware, quick start guide..Power Source PoE 54V DC 802.3at..This device have Frequencies of 2.4 GHz and 5 GHz bands..Its has The Restriction of Hazardous Substances (RoHS) is a standard..The WatchGuard AP330 comes with a standard 1-year warranty

16% off  of Netgear WAX610PA Dual Band PoE Multi-Gig Insight Managed WiFi 6 Access Point with Power Adapter

Netgear WAX610PA dual band PoE Multi-Gig Insight Managed WiFi 6 access point. Get powerful and reliable WiFi 6 connectivity for all your devices, even in high-density environments. Simplified enterprise-grade security and networking for the smaller business. Power adapter included..Dual band PoE Multi-Gig Insight managed WiFi 6 access point.Dimensions: 1.30"H x 6.33"W x 6.33"D.Comes in white.Faster and more reliable WiFi due to higher throughput and more coverage with the use of both 2.4Ghz and 5Ghz bands simultaneously.Extra wired 2.5Gbps Ethernet port that's backward compatible with 100/1000Mbps Ethernet for easy wiring, WAX610PA version includes power adaptor for non-PoE installations.Wire-free installation with other WAX610, WAX610Y, WAC540, or WAC564 creates the perfect seamless business network..Maximum of users: 250.Concurrent users: 30.2.5G Ethernet port.Separate and secure networks for admin, guests, employees and IoT like cameras, locks and more

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..AP-577 (US) 802.11ax 2x2:2/4x4:4 dual radio integrated directional antenna outdoor AP.Built in 90°H x 90°V directional antennas: 5 GHz (antennas 5.6dBi), 2.4 GHz (antennas 6.8dBi), BLE/Zigbee (Integrated omnidirectional antennas with peak gain of 8.4dBi).Ports: one HPE SmartRate port (RJ-45), one 100/1000BASE-T (RJ-45), USB-C.Security: WPA3 and Enhanced Open, MPSK enables simpler passkey management for WPA2 devices, a secure SSL/IPSec VPN tunnel and installed TPM for secure storage of credentials, keys and boot code.Dimensions: 5.6"H x 9.0"W x 8.7"D.Lifetime manufacturer limited warranty

WatchGuard's AP 130 is an ideal Wi-Fi 6 solution to support low-density indoor environments like a small office or remote workers with a secure WPA3 encryption. Integrated security is delivered by supporting the 802.11 standard and WPA3 encryption to enhance the Wi-Fi experience. Includes Wi-Fi 6 2x2 radio with four internal antennas. Maximum TX power delivers 22 dBm and a 3dBi antenna gain with one Ethernet port supporting up to 1 Gbps. Maximum data rate includes a crystal clear and seamless wireless experience supporting 1.2 Gbps on the 5 GHz band and 574 Mbps available on the 2.4 GHz band. WatchGuard’s AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points..This Dual-Band (2.4 GHz and 5 GHz) Device is designed for low-density indoor environments such as small offices or for remote workers..The WatchGuard AP130 supports the Wi-Fi 6 (802.11ax) standard Here are the maximum data transfer rates 2.4 GHz Band Up to 574 Mbps (0.574 Gbps) 5 GHz Band: Up to 1200 Mbps (1.2 Gbps).The WatchGuard AP130 supports PoE (Power over Ethernet): 54V DC 802.3at (PoE+)12. WiFi Standard: Wi-Fi 6 (802.11ax).Supports high-efficiency wireless connectivity with WPA3 encryption..Connector, Port or Interface Types are 1 x 1 Gbps Ethernet port (PoE+), 1 x USB port (currently not in use), 1 x RJ45 serial console port..Included Components AP130 Access Point Unit, Ceiling Mount T-Rail Brackets, Wall Mount Screws and Spacers, Quick Start Guide.Power source of 54V DC 802.3at (PoE+).Device supports these Frequencies 2.4 GHz and 5 GHz bands..Complies with the Restriction of Hazardous Substances (RoHS) directive, ensuring the product is free from specific hazardous materials and environmentally friendly..The WatchGuard AP130 comes with a standard 1-year hardware warranty.

The AP 430 CR is perfect for high-density deployments that include an industrial-rated IP67 enclosure, designed for either indoor or rugged outdoor deployment with superior Wi-Fi 6 performance and secure WPA3 encryption. Includes six external antennas to deliver a maximum TX power of 23dBm. One ethernet port is included to support up to 5 Gbps and includes one gigabit PoE+ port. Lightning-fast speed crafts an unwavering connectivity executed through a total of 2402 Mbps the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band. Integrated 4x4 radio chains and streams to deliver a secure and seamless network experience. WatchGuard's AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points. Requires 6 external antennas (WG9004) sold separately..Dual-band (2.4 GHz and 5 GHz) designed for outdoor use in harsh environments..Max Data rate up to 574 Mbps available on the 2.4 GHz band, Max Data rate up to 2.3 Gbps on the 5 GHz band.Supports PoE (802.3at) and Wi-Fi 6 standard..Offers MU-MIMO for efficient multiple device connectivity..1-GbE-RJ45 Ports 1x 5-GbE-RJ45 Ports 1x PoE Powered Device (PD) PoE-PD Ports.Package Contents AP430CR Outdoor Access Point Wall Mount Plate Pole Mount Clamp.Powered via PoE or optional DC power adapter..Operates on 2.4 GHz and 5 GHz frequencies with enhanced range..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited hardware warranty.Support for up to eight individual SSIDs per radio allows for maximum flexibility in network design.Lightning-fast speed crafts an unwavering connectivity experience executed by 2402 Mbps on the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..AP-575 (US) 802.11ax 2x2:2/4x4:4 dual radio integrated omni-antenna outdoor AP.Built in omni directional antennas: 5 GHz (antennas 5dBi), 2.4GHz (antennas 3.4dBi), BLE/Zigbee (integrated omnidirectional antenna and the peak gain of 6dBi).Ports: one HPE SmartRate port (RJ-45), one 100/1000BASE-T (RJ-45), USB-C.Security: WPA3 and Enhanced Open, MPSK enables simpler passkey management for WPA2 devices, a secure SSL/IPSec VPN tunnel and installed TPM for secure storage of credentials, keys and boot code.Dimensions: 10.6"H x 9.4"W x 9.4"D.Lifetime manufacturer limited warranty

WatchGuard’s high-performance Wi-Fi 6 access point is the ideal choice for high-density indoor environments of all shapes and sizes to utilize the most secure WPA3 encryption for a seamless Wi-Fi 6 experience for end users to enjoy.Dual-band (2.4 GHz and 5 GHz) for high-density environments..Wi-Fi 6 (802.11ax) with up to 4.8 Gbps (5 GHz) and 1.148 Gbps (2.4 GHz)..Supports PoE (802.3at) and Wi-Fi 6 standard..Supports MU-MIMO for multiple device connectivity..2.5 Gigabit Ethernet (GbE) port for wired connectivity..Includes access point unit, mounting hardware, and user guide..Powered via PoE or separate power adapter..Operates on 2.4 GHz and 5 GHz frequency bands..Complies with Wi-Fi 6 (802.11ax), FCC, CE, and RoHS certifications..Comes with a 1-year limited warranty.Qualcomm Cypress IPQ8072A Quad-core A53 ARM processor at 2 GHz with 2 GB RAM and 256 MB Flash

The WatchGuard AP332CR is designed for medium-density deployments and is IP67-rated to enable use in outdoor and rugged environments. This dual-band access point delivers fast, reliable coverage with a 2x2 radio and four external, omnidirectional antennas offering up to 1.2 Gbps on the 5 GHz band. A single PoE+ port is included to support data rates up to 2.5 Gbps. Utilizing WatchGuard Cloud for deployment and configuration, the AP332CR offers a seamless experience with Wi-Fi 6 performance and WPA3 encryption ? making it ideal for building easily scalable networks across school campuses, public hotspots, and smaller manufacturing environments..Dual-band (2.4 GHz and 5 GHz) for outdoor/rugged environments..Wi-Fi 6 (802.11ax) with up to 2.4 Gbps (5 GHz) and 574 Mbps (2.4 GHz)..One PoE+ port supporting up to 2.5 Gbps, Wi-Fi 6 standard..Provides MU-MIMO for efficient, multiple device connectivity..Interfaces/Ports Ethernet Technology 2.5 Gigabit Ethernet Number of Network (RJ-45) Ports 1 PoE PD Port.Package Contents AP332CR Outdoor/Rugged Access Point 4 x Omnidirectional External Antennas.Powered via PoE or optional DC power input..Operates on 2.4 GHz and 5 GHz bands for wide coverage..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited warranty.One PoE+ port supporting up to 2.5 Gbps

1+km transmission Range O1-5G adopts of internal power amplifier and 9dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 1km..Operating on the 5GHz band, the Tenda O1-5G KIT is ideal for PtP and P2MP applications like video surveillance, internet sharing, and long-range connectivity..Utilizing Wi-Fi 5 (802.11ac) with a maximum speed of 867 Mbps, it ensures fast and reliable wireless communication for data-intensive applications..Supports Power over Ethernet (PoE) and Wi-Fi 5, enabling simplified installation with power and data via a single Ethernet cable..It Offers robust outdoor connectivity with 11AC technology, 867Mbps speeds, and a 9dBi directional antenna for stable 1km connections..Included Components: 5GHz 9dBi 11AC 867Mbps Outdoor CPE, 1 x Power Adapter, 1 x PoE Injector, 1 x Quick Installation Guide.Supports 12V 1A Passive PoE and DC power options, offering flexible and easy installation in various environments..Operates on the 5GHz band, offering high-speed wireless connectivity with less interference than the 2.4GHz band..Features an IP65 waterproof enclosure for protection against dust and water..Certifications & Standards: FCC, CE, RoHS.Comes with 3 years limited warranty.

High-Performance airMAX ac Bridge Incorporating a dish reflector design with proprietary airMAX ac technology, the PowerBeam AC is ideal for CPE deployments requiring maximum performance. Management Wi-Fi Radio The PowerBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the PowerBeam AC offers a more robust mount with a convenient lifting loop or handle. Integrated Radio Design Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses. Plug and Play Installation The PowerBeam AC requires no tools for assembly; only a single wrench is required for pole-mounting. Performance Breakthrough airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Superior Processing Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology. Incredible Antenna "Beam" Performance The form factor of the PowerBeam AC features the highest gain for its size. The PowerBeam AC's excellent beam directivity provides the best performance in high-noise environments. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..High-performance Wi-Fi 5 access point to help you expand your network up to 15km (9.32 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 gigabit Ethernet (RJ45) port (PoE-in).Dedicated Wi-Fi radio for management.Comes with a 24V/0.5A Gigabit PoE adapter.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5240-5725MHz, U-NII-3 5725-5850MHz; management dadio: 2412-2462MHz.Meets or exceeds the CE, FCC, IC, RoHS, IEC 68-2-11 (ASTM B117), MIL-STD-810 G Method 509.5, IEC 68-2-6, IEC 68-2-14, IEC 68-2-5 at 40 degrees Celsius (104 degrees Fahrenheit), ETS 300 019-1-4, ETS 300 019-1-4, MIL-STD-810 G Method 506.5 standards.Tight beamwidth RF energy technology blocks or spatially filters out noise, so noise immunity is improved.Operating system: airOS 8.Long-range point-to-point (PtP) link mode.Offers strong WPA2 security.UNMS app allows you to set up, configure, and manage the NanoBeam access point (downloaded from the App Store or Google Play).Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using predesignated time slots scheduled by an intelligent AP controller.Intelligent QoS: priority assigned to voice/video for seamless streaming.Mounting bracket conveniently offers elevation adjustments (20-degree tilt).1 Year Warranty

i24 is a gigabit dual-band ceiling access point that compliant with IEEE 802.11ac Wave 2, and offers a concurrent data rate up to 1167 Mbps. Powered by MU-MIMO technology, letting you enjoy better experience. And the built-in omni-directional antennas broaden the wireless coverage of a single AP. In addition, you are allowed to adjust its transmit power as required using the web UI, and use an IEEE 802.3at-compliant PoE sourcing equipment to power on it, achieving long-distance power supply without tampering your existing grid network. You are also allowed to use Tenda access controllers (AC) to configure and manage multiple i24 in a centralized manner..Access point operates on two wireless bands . The dual-band capability allows for more flexible and efficient wireless connectivity, making it suitable for both home and small business environments..Supports the 802.11ac Wave 2 wireless standard. It offers a maximum data transfer rate of 1167 Mbps (1.167 Gbps).This access point supports Power over Ethernet (PoE). it adheres to the Wi-Fi 5 standard, ensuring high-speed and reliable wireless connectivity..Provides robust wireless connectivity with the following features: Dual-Band Support: Operates on both 2.4 GHz and 5 GHz bands for flexible and efficient connectivity..includes the following connector, port, and interface types: One 10/100/1000 Mbps Ethernet Port (PoE) RESET Button SYS LED Indicator.In the box : Tenda I24 Access Point Power Adapter (DC: 12V 1A) Ethernet Cable User Manual Quick Installation Guide.Can be powered using: Power over Ethernet (PoE) DC power adapter (DC: 12V 1A).Certified by : Restriction of Hazardous Substances (RoHS)..Comes with a 3 year limited warranty.

Introducing the airMAX LiteAP AC, the high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Operates in the worldwide, license-free 5GHz frequency range with high-performance speeds. The LiteAP AC combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range with cost-effective value. The ball-joint mount provides adjustment flexibility for versatile mounting options. Minimal fasteners simplify installation. No tools are needed; only a single wrench is required for pole-mounting..This access point provides high-performance solution for long-distance, wireless broadband bridging.Dimensions: 17.81"H x 2.14"W x 3.1"D.IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Delivers up to 450Mbps real TCP/IP throughput and features an efficient form factor.Features a lightweight antenna with an integrated radio in a sleek design.Operates in the worldwide, license-free 5GHz frequency range.Networking interface: 10/100/1000 Ethernet port.Antenna gain: 16dBi.Power supply: 24V/0.5A Gigabit PoE adapter (included).Power method: passive PoE (pairs 4, 5+; 7, 8 return).The ball-joint mount provides adjustment flexibility for versatile mounting options.No tools are needed for installation; only a single wrench is required for pole-mounting.Operating temperature: -40 to 158 degrees Fahrenheit; operating humidity: 5 to 95% noncondensing.Meets or exceeds FCC and RoHS standards.1 Year Warranty

The Grandstream GWN7603 is a compact Wave-2 Wi-Fi access point designed for small businesses, hotels, and home offices. With dual-band 2×2:2 MU-MIMO technology and four Gigabit Ethernet ports, it delivers up to 1.27Gbps wireless throughput and supports over 100 concurrent clients. Featuring PoE/PoE+ support, embedded controller management, and advanced QoS, the GWN7603 ensures flexible deployment and reliable performance in low-to-medium density environments..Dual-band indoor use with compact access point functionality..AC1300 standard and 1270Mbps wireless data transfer performance..PoE/PoE+ and integrates Wi-Fi 5 for efficient connectivity..802.11 a/b/g/n/ac wireless connectivity protocols..4x 1G Ethernet ports, reset pinhole, and Kensington lock..Mounting kits and a quick installation guide for setup..Powered via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz bands for reliable indoor coverage..Certified under FCC, CE, RCM, IC for global compliance..1-year manufacturer warranty.

The Grandstream GWN7670 is a next-generation enterprise-grade Wi-Fi 7 access point designed for high-density environments and seamless connectivity. Featuring dual-band 2x2:2 MIMO with advanced technologies like DL/UL OFDMA, Multi-RU, and Preamble Puncturing, it delivers up to 3.6Gbps wireless and 5Gbps wired throughput. With support for 4096 QAM and Multi-Link Operation (MLO), it maximizes spectrum efficiency and minimizes interference. Ideal for voice-over-Wi-Fi and real-time applications, the GWN7670 supports 256 concurrent clients, advanced QoS, BLE 5.3, and up to 175 meters of coverage. It includes two 2.5G Ethernet ports with PoE+ and integrates a controller for managing up to 50 APs locally, while also supporting Grandstream’s GDMS cloud and GWN Manager platforms..Designed for dual-band Wi-Fi 7 access with up to 256 concurrent client connections..Delivers 3.6Gbps wireless and 5Gbps wired throughput using 4096 QAM and MLO technology..Supports PoE+ power and complies with the latest WiFi 7 standard for high-speed networking..802.11 a/b/g/n/ac/ax/be wireless protocols for seamless connectivity..Equipped with 2×2.5G Ethernet ports, reset pinhole, and Kensington lock interface..Packaged with mounting kits, quick start guide, and anti-trip power cord..Powered via PoE/PoE+ with self-adaptive power detection for efficient operation..2.4GHz and 5GHz bands with advanced channel bandwidth support..Certified by FCC, CE, RCM, IC for global compliance and safety assurance..3-year manufacturer warranty for long-term reliability.

Netgear Insight is a high-performance Wi-Fi 6 access point, perfect for small and medium-sized businesses. The access point is a dual band 4x4 design delivering up to 3.6Gbps total Wi-Fi throughput, supported by a 2.5Gbps Power-over-Ethernet port, an industry leader of performance and cost effectiveness in its product class. Supports the next generation Wi-Fi 6 smartphones, IoT devices, and notebook computers, delivering up to 40% more throughput to each individual device in the 5GHz band and 100% more throughput in the 2.4GHz band, compared to the previous generation equivalent model; provides 4x the client device connection, allowing businesses to serve more customers with better speed and less congestion. This access point is great in high density client device environments such as schools, hotels, restaurants and conference centers, and provides enterprise grade Wi-Fi network security. With Insight management, AP works seamlessly with your current Netgear Insight managed switches, Wi-Fi access points and network storage, and is compatible with previous generation Wi-Fi devices (Wi-Fi 5 802.11ac for example) and Wi-Fi access points..High-performance Wi-Fi 6 access point is perfect for small- and medium-sized businesses.Dual-band 4x4 (2.4GHz and 5GHz) eight streams of data for an aggregate throughput of up to 3.6Gbps.Contains 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X), supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Dimensions: 1.35"H x 8.09"W x 8.09"D.Business class Wi-Fi based on next-generation 802.11ax Wi-Fi 6 technology on both 5GHz and 2.4GHz bands, backward compatible with 802.11b/g/n/a/ac.40% more throughput in four-stream 5.0GHz band and 100% more throughput in four-stream 2.4GHz band compared to previous generation.Four times more client device supported.Enterprise security and Enhanced Open security, such as WAP3, WPA Enterprise, 8x SSID, and VLAN.Basic Service Set Coloring (BSS Coloring) enabling significant improvement in radio frequency channel efficiency and reduction of interference.Orthogonal Frequency Division Multiple Access (OFDMA) allowing simultaneous services to multiple devices in the same channel thus improving bandwidth efficiency and reducing latency.Target Wake Time (TWT) allows for more efficient power usage resulting in longer battery life in Wi-Fi 6 client devices.Beamforming+; advanced 6th Gen Wi-Fi technology such as upstream and downstream MU-MIMO.Remote management and monitoring from Netgear Insight app or Cloud Portal for unrivaled management experience of your wireless network.PoE power consumption: 25.5W.Box contains: access point, wall/ceiling mount kit, installation guide, power adapter.5-year manufacturer limited warranty

The Ubiquiti® airCube-AC Series ACB-AC-US wireless access point in black, has a sleek design with durable plastic construction. It features 4 Gigabit Ethernet ports with data transfer rate of up to 1.14 Gbps. The dual band access point utilizes 802.11ac and 2x2 MIMO technologies for reliable performance. It has throughput of up to 300 Mbps in 2.4 GHz radio band and up to 866.7 Mbps in 5 GHz radio band. This access point with super antenna, ensures UNMS and U mobile support. It is suitable for use in your customer deployments..Wi-Fi access point is perfect for use in customer deployments.Dimensions: 3.52"H x 3.51"W x 3.46"D.Comes in black color with plastic construction.Interfaces/ports: 4 x Gigabit Ethernet port.Wireless LAN: 802.11ac 2x2.Gain: 4 dBi at 2.4 GHz, 5 dBi at 5 GHz.Frequency: Dual band 2.4 GHz, 5 GHz simultaneously.Power supply: 24 Volt PoE or 24 Volt PSU in on LAN port 1.Wireless transmission speed: 1.14 Gbps.Maximum power consumption: 8.5 W, temperature: -10 to 50 deg C (operating), humidity: 5 to 95 percent noncondensing (operating).Throughput: Up to 300 Mbps in the 2.4 GHz radio band, Up to 866.7 Mbps in the 5 GHz radio band.Features UNMS support, super antenna, U mobile support and sleek design.Features 22 dBm maximum TX power, status LED and UNMS app for fast setup from a mobile device.Features PoE pass-through, Powers airMAX device, with PoE in/out, controllable 24 V PoE out on WAN port technology.Meets CE, FCC, IC standards.Weight: 9.88 oz.

The Cisco Catalyst 9120AX series access points are resilient, secure, and intelligent. We are more dependent on our wireless networks than ever before. Additional devices connect to the network every year, and the Cisco Catalyst 9120AX series access points will provide a seamless experience anywhere for everyone. Going beyond the Wi-Fi 6 (802.11ax) standard, the 9120AX series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending Cisco's intent-based network and perfect for networks of all sizes, the Cisco Catalyst 9120AX series scales to the growing demands of IoT while fully supporting the latest innovations and new technologies. Not only that, but the 9120AX series is a leader in performance, security, and analytics. The Cisco Catalyst 9120AX series access points, paired with Cisco DNA, are enterprise-class products that will address your current and future needs. These access points are the first step in updating your network so that you can take better advantage of all of the features and benefits that Wi-Fi 6 provides..Wireless dual-band (2.4GHz, 5GHz) indoor access point intended for enterprises that need more wireless capacity and/or wider channels.AX dual-band access point.One port with PoE support.Wi-Fi 6 certification supports all mandatory 802.11ax features that include MIMO, OFDMA, TWT, and more.Contains a two 2.5 Gigabit Ethernet uplink port with PoE-in support (802.3at), USB 2.0 @ 4.5W host interface, Auto-MDIX, and management console port (RJ-45).Power over Ethernet (PoE): 802.3at.Dual radio for simultaneous dual-band operation (5GHz and 2.4GHz, 802.11ax, 4 x 4 MIMO).Meets or exceeds the UL2043,EN 55032 (rev. 2015), EN 301 489-17 (v3.1.1 2017-02), UL 60950-1, and EN 301 893 (v2.1.1) standards.Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors.Compact multi-RF connector with DART interface.Cisco Catalyst 9120AXE access points are certified for use with antenna gains up to 6dBi (2.4GHz and 5GHz).Safeguard sensitive data with WPA2/WPA3 and Enhanced Open.Cisco DNA software support.Lifetime manufacturer limited warranty

Netgear Insight is a high-performance Wi-Fi 6 access point, perfect for small and medium-sized businesses. The access point is a dual band 4x4 design delivering up to 3.6Gbps total Wi-Fi throughput, supported by a 2.5Gbps Power-over-Ethernet port, an industry leader of performance and cost effectiveness in its product class. Supports the next generation Wi-Fi 6 smartphones, IoT devices, and notebook computers, delivering up to 40% more throughput to each individual device in the 5GHz band and 100% more throughput in the 2.4GHz band, compared to the previous generation equivalent model; provides 4x the client device connection, allowing businesses to serve more customers with better speed and less congestion. This access point is great in high density client device environments such as schools, hotels, restaurants and conference centers, and provides enterprise grade Wi-Fi network security. With Insight management, AP works seamlessly with your current Netgear Insight managed switches, Wi-Fi access points and network storage, and is compatible with previous generation Wi-Fi devices (Wi-Fi 5 802.11ac for example) and Wi-Fi access points..High-performance Wi-Fi 6 access point is perfect for small- and medium-sized businesses.Dual-band 4x4 (2.4GHz and 5GHz) eight streams of data for an aggregate throughput of up to 3.6Gbps.Contains 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X), supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Dimensions: 1.35"H x 8.09"W x 8.09"D.Business class Wi-Fi based on next-generation 802.11ax Wi-Fi 6 technology on both 5GHz and 2.4GHz bands, backward compatible with 802.11b/g/n/a/ac.40% more throughput in four-stream 5.0GHz band and 100% more throughput in four-stream 2.4GHz band compared to previous generation.Four times more client device supported.Enterprise security and Enhanced Open security, such as WAP3, WPA Enterprise, 8x SSID, and VLAN.Basic Service Set Coloring (BSS Coloring) enabling significant improvement in radio frequency channel efficiency and reduction of interference.Orthogonal Frequency Division Multiple Access (OFDMA) allowing simultaneous services to multiple devices in the same channel thus improving bandwidth efficiency and reducing latency.Target Wake Time (TWT) allows for more efficient power usage resulting in longer battery life in Wi-Fi 6 client devices.Beamforming+; advanced 6th Gen Wi-Fi technology such as upstream and downstream MU-MIMO.Remote management and monitoring from Netgear Insight app or Cloud Portal for unrivaled management experience of your wireless network.PoE power consumption: 25.5W.Box contains: access point, wall/ceiling mount kit, installation guide.5-year manufacturer limited warranty

The Cisco Catalyst 9130AX series access points are the next generation of enterprise access points. They are resilient, secure, and intelligent. With the emergence of high-density networks and the Internet of Things (IoT), we are more dependent on wireless networks than ever before. Increasing numbers of devices connect to the network every year, ranging from high-performance client devices to low-bandwidth IoT devices. Cisco Catalyst 9130AX series access points provide a seamless experience anywhere for everyone, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11ax) standard, the 9130AX series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending Cisco's intent-based network and perfect for networks of all sizes, the Cisco Catalyst 9130AX Series scales to meet the growing demands of IoT while fully supporting the latest innovations and new technologies. The 9130AX series is also a leader in performance, security, and analytics. The Cisco Catalyst 9130AX series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides..This access point provides integrated security, resiliency, and operational flexibility as well as increased network intelligence.Provides up to 5.38Gbps (8x8 80MHz or dual 4x4 80+80MHz on 5GHz and 4x4 20MHz on 2.4GHz).Contains 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ45): IEEE 802.3az, management console port (RJ45), and USB 2.0 at 4.5W (enabled via future software).Dimensions: 1.88"H x 8.9"W x 8.9"D.Meets or exceeds IEC, EN, UL, CAN/CSA, AS/NZS, ICES, VCCI-CISPR, RSS standards.Delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT.The Cisco RF Application-Specific Integrated Circuit (ASIC) is a fully integrated Software-Defined Radio (SDR) that can perform advanced RF spectrum analysis and delivers features such as Cisco CleanAir, Wireless Intrusion Prevention System (WIPS), FastLocate, and Dynamic Frequency Selection (DFS) detection.Orthogonal Frequency-Division Multiple Access (OFDMA)-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting eight spatial streams, Multiuser Multiple Input, Multiple Output (MU-MIMO) enables access points to split spatial streams between client devices to maximize throughput.Power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Comes in white.Lifetime manufacturer limited warranty

The Aruba Instant On AP25 indoor access point offers ultrahigh-speed performance for high-density small businesses. Perfect for gaming, boutique hotels, tech start-ups, and professional offices. Features of the AP25 include orthogonal frequency-division multiple access (OFDMA), multi-user MIMO and target wake time (TWT). With up to four spatial streams (4SS) and 160MHz channel bandwidth (HE160), the AP25 provides groundbreaking wireless capabilities for businesses looking to boost performance and future-proof their networks..Wireless dual-band (2.4GHz, 5GHz) indoor access point intended for enterprises that need more wireless capacity and/or wider channels.With IEEE 802.11ax standard and data transfer rates up to 2500Mbps, this wireless access point enables efficient network performance.One port with POE-in support.Based on the 802.11ax (Wi-Fi 6) standard.Contains one uplink Gigabit Ethernet port with PoE-in support.Power over Ethernet (POE): 802.3at (Class 4), 12VDC.Dual radio for simultaneous dual-band operation: 5GHz 802.11ax 4 x 4 MIMO for an up to 4.8Gbps wireless data rate with MU-MIMO support (Wi-Fi 6); 2.4GHz 802.11ax 2 x 2 MIMO for an up to 574Mbps wireless data rate (Wi-Fi 6).Meets or exceeds the EN 60601-1-1 and EN 60601-1-2 standards.Instant On technology automatically detects and applies highest (critical) PoE priority to access point for uninterrupted power delivery and wireless network access.HE160 mode delivers higher performance with 160MHz supported clients.Orthogonal frequency-division multiple access (OFDMA) allows the access point to handle multiple Wi-Fi 6 capable clients on each channel simultaneously, regardless of device or traffic type.Target Wake Time technology helps reduce power consumption, extending battery life.Supports MU-MIMO, allowing service to multiple clients (Wi-Fi 5 and Wi-Fi 6) at the same time.1024-Quadrature Amplitude Modulation (1024-QAM) improves throughput to access points and devices.Low-density parity check (LDPC) delivers high-efficiency error correction for increased throughput.Manage everything through the official app on the device of your choice with the Aruba Instant On app.Built-In security gateway/firewall.2-year manufacturer limited warranty

The Aruba Instant On AP25 indoor access point offers ultrahigh-speed performance for high-density small businesses. Perfect for gaming, boutique hotels, tech start-ups, and professional offices. Features of the AP25 include orthogonal frequency-division multiple access (OFDMA), multi-user MIMO and target wake time (TWT). With up to four spatial streams (4SS) and 160MHz channel bandwidth (HE160), the AP25 provides groundbreaking wireless capabilities for businesses looking to boost performance and future-proof their networks..Wireless dual-band (2.4GHz, 5GHz) indoor access point intended for enterprises that need more wireless capacity and/or wider channels.With IEEE 802.11ax standard and data transfer rates up to 2500Mbps, this wireless access point enables efficient network performance.One port with POE-in support.Based on the 802.11ax (Wi-Fi 6) standard.Contains one uplink Gigabit Ethernet port with PoE-in support.Power over Ethernet (POE): 802.3at (Class 4), 12VDC.Dual radio for simultaneous dual-band operation: 5GHz 802.11ax 4 x 4 MIMO for an up to 4.8Gbps wireless data rate with MU-MIMO support (Wi-Fi 6); 2.4GHz 802.11ax 2 x 2 MIMO for an up to 574Mbps wireless data rate (Wi-Fi 6).Meets or exceeds the EN 60601-1-1 and EN 60601-1-2 standards.Instant On technology automatically detects and applies highest (critical) PoE priority to access point for uninterrupted power delivery and wireless network access.HE160 mode delivers higher performance with 160MHz supported clients.Orthogonal frequency-division multiple access (OFDMA) allows the access point to handle multiple Wi-Fi 6 capable clients on each channel simultaneously, regardless of device or traffic type.Target Wake Time technology helps reduce power consumption, extending battery life.Supports MU-MIMO, allowing service to multiple clients (Wi-Fi 5 and Wi-Fi 6) at the same time.1024-Quadrature Amplitude Modulation (1024-QAM) improves throughput to access points and devices.Low-density parity check (LDPC) delivers high-efficiency error correction for increased throughput.Manage everything through the official app on the device of your choice with the Aruba Instant On app.Built-In security gateway/firewall.2-year manufacturer limited warranty

The Grandstream GWN7664E is a high-performance AX6000 Wi-Fi 6 access point built for enterprise-grade indoor deployments. With dual-band 4×4:4 MU-MIMO and OFDMA technology, it delivers up to 6Gbps wireless throughput and supports 512 concurrent clients. Featuring dual 2.5G Ethernet ports, PoE+ support, and embedded controller management, the GWN7664E ensures seamless connectivity and advanced QoS for real-time applications in medium-to-large business environments..Dual-band indoor use with enterprise-grade access point performance..AX6000 standard and 6000Mbps wireless data transfer capability..PoE+ and integrates Wi-Fi 6 for high-speed network efficiency..802.11 a/b/g/n/ac/ax wireless connectivity protocols..2x 2.5G Ethernet ports, reset pinhole, and Kensington lock..Mounting kits and a quick start guide for easy installation..Powered via Ethernet using 802.3at PoE standards..2.4GHz and 5GHz bands for extended indoor coverage..Certified under FCC, CE, RCM, IC for global deployment..1-year manufacturer warranty.

The Grandstream GWN7670WM is a sleek in-wall Wi-Fi 7 access point designed for next-generation enterprise networks. With dual-band 2×2:2 MIMO and advanced technologies like Multi-RU, 4096 QAM, and MLO, it delivers up to 3.6Gbps wireless throughput and supports 256 concurrent clients. Its stylish, paintable shell blends into any space, while PoE+ support and embedded controller management simplify deployment. Ideal for voice-over-Wi-Fi and high-density environments, this AP ensures seamless performance and secure connectivity..Dual-band in-wall use with enterprise-grade access point capability..BE standard and 3600Mbps wireless data transfer performance..PoE+ and integrates Wi-Fi 7 for ultra-fast, low-latency networking..802.11 a/b/g/n/ac/ax/be wireless connectivity protocols..2.5G Ethernet WAN/LAN port and reset pinhole interface..Mounting kits and a quick start guide for easy setup..Powered via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz bands for extended indoor coverage..Certified under FCC, CE, RCM, IC and built for secure enterprise use..1-year manufacturer warranty.

The Grandstream GWN7604 is a compact Wi-Fi 6 access point designed for small businesses, hotels, and home offices. It delivers up to 3Gbps aggregate wireless throughput and supports 256 concurrent clients across dual-band 2.4GHz and 5GHz frequencies. Equipped with four Gigabit Ethernet ports—one uplink with PoE/PoE+ and two with PSE—it enables flexible power and network distribution to connected devices. The GWN7604 features advanced QoS for low-latency applications, secure boot with digital signature protection, and seamless management via Grandstream’s GDMS cloud and GWN Manager platforms. With up to 100 meters of coverage, it’s ideal for scalable, secure wireless deployments..Dual-band coverage, ideal for small offices, hotels, and home networks..Wi-Fi 6 speeds up to 3000Mbps with 3Gbps aggregate wireless throughput..PoE/PoE+ input and WiFi 6 for flexible power and fast wireless performance..802.11 a/b/g/n/ac/ax for broad device compatibility..4 Gigabit Ethernet ports, reset pinhole, and Kensington lock..Packaged with mounting kits and a quick installation guide for easy setup..Powered through PoE or PoE+ with automatic power adaptation..Operates on 2.4GHz and 5GHz bands with MU-MIMO antenna design..Certified by FCC, CE, RCM, IC for global compliance and safety standards..1-year manufacturer warranty.

The multifunctional Aruba 203R Remote AP delivers secure and fast 802.11ac wireless and wired network access to corporate resources for branch and home offices.: Unique in the industry, the compact Aruba 203R remote AP is software configurable to operate in either 1x1 dual radio mode, or 2x2 single radio mode. It supports up to 867Mbps in the 5GHz band or up to 400Mbps in the 2.4 GHz band when operating in single radio 2x2 mode. In dual radio 1x1 mode, the maximum data rates for the 203R AP are 433Mbps in the 5GHz band and 200Mbps in the 2.4GHz band. The 203R AP offers a variety of enterprise-class features, including role-based network access, policy-based forwarding, and Adaptive Radio Management (ARM), which gives remote workers the same high-quality Wi-Fi experience they get at corporate headquarters. When additional capacity is desired, this low-cost 203R AP can be quickly added to an existing Aruba WLAN to improve network performance. Managed by the Aruba Mobility Controller, the 203R AP supports centralized configuration, data encryption, policy enforcement and network services. It extends corporate resources to remote locations by establishing site-to-site VPN tunnels to the data center. With an integrated Aruba Beacon, the 203R AP simplifies the remote management of a large scale network of battery-powered BLE Aruba Beacons and provides advanced location and indoor wayfinding, and proximity-based push notification capabilities. For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, APs can configure themselves when powered up, slashing the cost and time to deploy wireless in remote branches and home offices. UNIQUE BENEFITS: Deploy with or without controller: The 203R can be deployed in either controller-based (ArubaOS) or controllerless (InstantOS) deployment mode. New 802.11ac flexible radio architecture: The 203R AP is software configurable to operate in either 1x1 dual radio mode, or 2x2 single radio mode. Supports up to 867Mbps in the 5GHz band (with 2SS/VHT80 clients) or up to 400Mbps in the 2.4 GHz band (with 2SS/VHT40 clients). In 1x1 dual radio mode, these max speeds are up to 433Mbps (5GHz) and 200Mbps (2.4GHz). Built-in Bluetooth Low-Energy (BLE) radio : Delivers location-based services for BLE-enabled mobile devices. Enables management of your deployment of battery-powered Aruba Beacons. Advanced Cellular Coexistence (ACC) : Minimizes the impact from out-of-band interference from sources such as 3G/4G cellular networks..When connected to a compatible router or a network switch, this wireless access point lets you enjoy wireless internet connectivity throughout your home or office.Ensure speedy data transfer of up to 867 Mbit/s with the IEEE 802.11ac wireless technology.Gigabit Ethernet port for ultra-fast wired network speeds.Its management capability provides efficient control over setup and configuration of your network

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..Wireless dual-band (2.4GHz, 5GHz) outdoor access point designed for the highest levels of performance and greater deployment flexibility.Features Wi-Fi 6 standard with a combined peak data rate of up to 4.8Gbps.Include an integrated Bluetooth 5 and 802.15.4 radio (for Zigbee support) to simplify deploying and managing IoT-based location services, asset tracking services, security solutions and IoT sensors.Features 1 x 1000Base-T - RJ-45, 1 x console - USB-C, 1 x HPE Smart Rate - RJ-45.AP supports Power over Ethernet (on ports E0 and/or E1).Supported frequency bands: 2.400 to 2.4835 GHz (ISM); 5.150 to 5.250 GHz (U-NII-1); 5.250 to 5.350 GHz (U-NII-2A); 5.470 to 5.725 GHz (U-NII-2C); 5.725 to 5.850 GHz (U-NII-3/ISM); 5.850 to 5.875 GHz (U-NII-4).TAA-compliant.Features include Uplink and Downlink Orthogonal Frequency Division Multiple Access (OFDMA), Downlink Multi-User MIMO (MU-MIMO), and cellular co-location.The ACC feature uses built in filtering to automatically minimize the impact of interference of high power cellular base stations, in building distributed antenna systems as well as small cell and femtocell equipment.With the introduction of WPA3 and Enhanced Open, a Wi-Fi 6 certified client will never send unencrypted traffic over the air.AP provides connectivity for a maximum of 512 associated clients per radio (1024 in total).Available management choices include Aruba Central (cloud-based) or Aruba AirWave (multivendor, on premises) solutions.Withstands harsh outdoor weather conditions, providing fast speed, high density, and reliable connectivity outdoors in large open areas, such as stadiums and parking lots.Lifetime manufacturer limited warranty

Tenda AC1200 i24 is a gigabit dual-band ceiling access point that is compliant with IEEE 802.11ac Wave 2 and offers a concurrent data rate up to 1167Mbps. Powered by MU-MIMO technology, letting you enjoy a better experience. And the built-in omnidirectional antennas broaden the wireless coverage of a single AP. In addition, you are allowed to adjust its transmit power as required using the web UI and use an IEEE 802.3at-compliant PoE sourcing equipment to power on it, achieving long-distance power supply without tampering your existing grid network. You can use Tenda access controllers (AC) to configure and manage multiple i24 in a centralized manner..Gigabit dual-band ceiling access point provides satisfying wireless Internet connection for desktop computers, notebooks, and other devices.Up to 1317Mbps dual-band data rate and 1000Mbps Ethernet port let you enjoy ultrafast Internet connections.Contains Ethernet and DC power ports.Dimensions: 7.01"H x 7.01"W x 1.5"D.Maximum power consumption: full-load 13.5W.Allows clients that support either 2.4GHz or 5GHz band, or both, to connect to it at the same time, tripling the quantity of connected clients of traditional single-band AP.Meets or exceeds CE, FCC, and RoHS standards.Wireless security: WEP, WPA2-PSK, WPA-PSK, WPA2, WPA.Optimized antennas make it outstanding in radiating wireless signals and broadening wireless coverage.Featuring air interface scheduling, it can evenly allocate air interface resources, thus improving your wireless network speed as a whole by preventing clients with low data rate from consuming too much network resources.It also allows you to customize the RSSI threshold value so that you can disconnect clients that do not reach the RSSI.Powered by multiple interference-mitigation technologies, it automatically chooses the best channel and adjusts the transmit power to a reasonable value, significantly optimizing wireless signals by mitigating co-channel interference and electromagnetic interference (EMI).You are allowed to set multiple SSIDs and enabled to add VLAN tags for SSIDs with the IEEE 802.11q VLAN-compliant feature so as to protect the security of your network.You can use an IEEE 802.3at-compliant PoE sourcing equipment or a DC power adapter to power on it.You are allowed to configure and manage multiple i24 in a centralized manner through all Tenda access controllers (AC) and enterprise routers that include AC functionality and enjoy simple management, configuration, and monitoring of all access points.Comes in white

The NanoStation AC represent the next evolution of the iconic CPE design that revolutionized the wireless ISP industry. The NanoStation AC provides a secondary Ethernet port with software-enabled PoE. Use this port to conveniently power an external device, such as a PoE security camera, for seamless IP video integration. NanoStation AC model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. The NanoStation AC feature enhanced protection against ESD events. airOS8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..Access point has a dedicated Wi-Fi radio for management and is suitable for indoor and outdoor installations.Dimensions: 10.12"H x 3.31"W x 1.18"D.Compatible with airOS 8.Comes in white and made of UV-resistant polycarbonate.Powerful wireless features: access point PtMP airMAX mixed mode, airMAX ac protocol support, long-range point-to-point (PtP) link mode; selectable channel width: PtP (10/20/30/40/50/60/80MHz), PtMP (10/20/30/40MHz); automatic channel selection; transmit power control: automatic/manual; automatic distance selection (ACK timing); strong WPA2 security.Usability enhancements: airMagic channel selection tool, dynamic configuration changes, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including RF diagnostics and airView spectrum analyzer.Features airMAX technology and a dedicated Wi-Fi radio for management.This model utilizes the latest ESD protection to help protect against power surges.The radio and antenna are combined into a single body that takes up minimal space.No fasteners are required for pole‑mounting, and a single wall fastener (not included) is required for wall-mounting.Power supply: 24V, 0.5A Gigabit PoE supply (included); maximum power consumption: 9W.Power method: 802.3af alternative A (pairs 1, 2+; 3, 6 return); 24V passive PoE (pairs 4, 5+; 7, 8 return); gain: 16dBi.Networking interface: 10/100/1000MB/s Ethernet ports; channel bandwidths: 10/20/30/40/50/60/80MHz.Processor specs: Atheros MIPS 74Kc, 560MHz; memory: 64MB DDR2; cross-pol isolation: 20dB minimum.Polarization: dual linear; LEDs: power, Eth1, Eth2; signal strength.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity: 5 to 95% noncondensing.ETSI300-019-1.4 shock and vibration.Meets or exceeds CE, FCC, IC standards

The Juniper AP64 High Performance Multi Gigabit Outdoor Wireless Access Point ensures business continuity and operational efficiency in harsh environments. This high-performance, ruggedized and weather-resistant outdoor Wi-Fi 6E access point integrates AI for AX capabilities to automate network operation and boost Wi-Fi performance while providing real-time network insights..Designed for tri-band operation across 2.4 GHz, 5 GHz, and 6 GHz frequencies, suitable for both indoor and outdoor enterprise deployments..Supports Wi-Fi 6E (802.11ax) with a peak data transfer rate of 3600 Mbps (3.60 Gbps)..Includes Power over Ethernet (PoE) capability and complies with the Wi-Fi 6E standard..Provides wireless connectivity through Wi-Fi 6E and Bluetooth Low Energy (BLE) 5.3..Features a single 2.5 Gigabit Ethernet RJ-45 port for high-speed network access..Comes equipped with internal antennas, GPS/GNSS receiver, temperature sensor, and accelerometer..Operates using PoE as its primary power source, simplifying installation..Utilizes 2.4 GHz, 5 GHz, and 6 GHz bands to deliver optimal wireless performance..Complies with IEEE 802.11 a/b/g/n/ac/ax standards and integrates WIDS/WIPS for enhanced security..Limited 1-Year Manufacturer Warranty

The Grandstream GWN7664ELR is a high-performance AX6000 Wi-Fi 6 access point built for outdoor enterprise deployments. With dual-band 4×4:4 MU-MIMO and OFDMA technology, it delivers up to 6Gbps wireless throughput and supports 512 concurrent clients. Its IP67-rated weatherproof casing and 300-meter coverage range make it ideal for large outdoor spaces. Featuring embedded controller management, PoE+ support, and dual 2.5G ports, this AP ensures seamless connectivity and advanced QoS for real-time applications..Dual-band outdoor use with long-range access point coverage..AX6000 standard and 6000Mbps (6Gbps) wireless data transfer rate..PoE+ and integrates Wi-Fi 6 for high-efficiency performance..802.11 b/g/n/ac/ax wireless connectivity protocols..2.5G RJ45, 2.5G SFP, and reset button interfaces..Mounting kits and a quick installation guide for setup..Ethernet using 802.3at PoE standard with auto adaptation..2.4GHz and 5GHz bands for extended outdoor coverage..Certified under FCC, CE, RCM, IC and built to IP67 weatherproof grade..1-year manufacturer warranty.

The Grandstream GWN7661E is a sleek in-wall AX3000 Wi-Fi 6 access point designed for offices, hotels, and residential spaces. With dual-band MU-MIMO and OFDMA technology, it delivers up to 3Gbps wireless throughput and supports 256 concurrent clients. Featuring four Gigabit Ethernet ports, PoE/PoE+ support, and embedded controller management, the GWN7661E ensures seamless connectivity for both wired and wireless devices while blending discreetly into any environment..Dual-band in-wall use with enterprise-grade access point design..AX3000 standard and 3000Mbps wireless data transfer performance..PoE/PoE+ and integrates Wi-Fi 6 for modern network efficiency..802.11 a/b/g/n/ac/ax wireless connectivity protocols..Includes 4x 1G Ethernet ports, reset pinhole, and Kensington lock interface..Mounting kits and a quick installation guide for setup..Powered via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz bands for reliable indoor coverage..Certified under FCC, CE, RCM, IC for global compliance..1-year manufacturer warranty.

The Cisco Catalyst 9124AX Series outdoor access points are next-generation Wi-Fi 6 access points encased in a rugged and robust design that service providers and enterprises can easily deploy. With the emergence of high-density networks and the Internet of Things (IoT), we are more dependent on wireless networks than ever before. An increasing number of devices connect to the network every year, ranging from high-performance client devices to low-bandwidth IoT devices. The Cisco Catalyst 9124AX Series outdoor access points provide a seamless experience, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11ax) standard, the Catalyst 9124AX Series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. The Catalyst 9124AX Series offers flexible deployment options for service providers and enterprise networks that need the fastest links possible for mobile, outdoor clients (smartphones, tablets, and laptops), and wireless backhaul. With options for internal or external antennas, the 9124AX Series gives network operators the flexibility to balance their desired wireless coverage with their need for easy deployment. The Catalyst 9124AX Series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides..Wireless dual-band (2.4GHz, 5GHz) outdoor access point intended for enterprises that need more wireless capacity and/or wider channels.AX dual-band access point.One port with PoE support.Wi-Fi 6 certification supports all mandatory 802.11ax features that include MIMO, OFDMA, TWT, and more.Contains a one 2.5 Gigabit Ethernet uplink port with PoE-in support (802.3bt), and one Gigabit Ethernet SFP ports.Power over Ethernet (PoE): 802.3bt or DC power.Dual radio for simultaneous dual-band operation (5GHz and 2.4GHz, 802.11ax, 4 x 4 MU-MIMO).Meets or exceeds the IP66/IP67 IEC 60529 Ingress Rating, MIL-STD-810F, NEMA 250-2008, EN 60068-2-5, MIL-STD-810E, Method 514.4 standards.One status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors.Safeguard sensitive data with WPA2/WPA3 and Enhanced Open.Cisco DNA software support.Lifetime manufacturer limited warranty

Elevate your outdoor connectivity with the Grandstream GWN7660ELR, a high-performance AX3000 Wi-Fi 6 access point designed for enterprise-grade reliability. Engineered with IP67-rated weatherproof casing and heat-resistant technology, it thrives in harsh environments while delivering seamless coverage up to 300 meters. Featuring dual-band 2×2:2 MIMO with OFDMA and advanced antenna design, it supports up to 256 concurrent clients with blazing-fast 3Gbps aggregate wireless throughput. Integrated PoE/PoE+ support and a 2.5Gbps SFP port ensure flexible deployment, while the embedded controller and compatibility with GWN.Cloud and GWN Manager simplify network management. Ideal for warehouses, schools, hospitals, and multi-floor offices, this access point combines rugged durability with cutting-edge performance..Dual-band outdoor use with enterprise-grade access point functionality..AX wireless standard and up to 3000Mbps (3Gbps) data transfer rate..802.11 a/b/g/n/ac/ax wireless connectivity standards..1G RJ45 and 2.5G SFP ports plus a reset button interface..Mounting kits and a quick installation guide for easy setup..Powered via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz frequency bands for broad coverage..Meets FCC, CE, RCM, IC certifications and IP67 weatherproof standards..1-year manufacturer warranty.

Enhance your small-to-midsize business with fast and reliable Wi-Fi connections by connecting the Cisco Business 240AC Dual-Band Wireless Access Point to your compatible network router or switch. This kit includes three dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 2333 Mb/s over the 2.4 GHz and 5 GHz frequencies. Both of the 240AC's Gigabit Ethernet ports support 802.3af/at power over Ethernet, allowing you to transfer both data and power over a single cable, which can be passed through to IP cameras and other devices when connected to a compatible switch..Dual-Band Wireless Access Point.Wi-Fi 5 (802.11ac) Wave 2.Up to 2333 Mb/s Throughput.2.4 GHz / 5 GHz (Dual-Band).Internal Omnidirectional Antennas.2 x Gigabit Ethernet PoE Ports.4x4 MIMO.Wall & Ceiling Mountable.Works with Cisco Business Mobile App.Warranty Limited Lifetime

The Grandstream GWN7660E is a high-performance AX3000 Wi-Fi 6 access point built for medium-to-high density environments. With dual-band MU-MIMO technology and XTRA Range beamforming, it delivers up to 3Gbps wireless throughput and supports 256 concurrent clients. Its embedded controller, PoE/PoE+ support, and compatibility with GWN.Cloud and GWN Manager make deployment and management effortless. Ideal for voice-over-Wi-Fi and real-time applications, this sleek indoor AP combines enterprise-grade performance with simplified scalability..Dual-band indoor use with enterprise-grade access point performance..AX standard and 3000Mbps (3Gbps) wireless data transfer rate..PoE/PoE+ operation and supports Wi-Fi 6 protocol for modern networks..802.11 a/b/g/n/ac/ax wireless connectivity for broad compatibility..1G Ethernet port, reset pinhole, and Kensington lock interface..Mounting kits and a quick start guide for streamlined setup..Power via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz frequency bands for extended coverage..Complies with FCC, CE, RCM, and IC certifications for global deployment..1-year manufacturer warranty.

The TP-LINK AX3000 dual-band Wi-Fi 6 access point is designed for business environments requiring high-performance Wi-Fi. Next-era business Wi-Fi 6 with speeds up to 2976Mbps brings more than twice the speed of Wi-Fi 5. Every application feels more fluid with drastically improved Wi-Fi speeds. Wi-Fi 6 features such as OFDMA and MU-MIMO handle multiple clients across congested environments like typical office spaces, lodging, and hospitals. Enjoy faster speeds on more devices with less lag..Dual-band Wi-Fi 6 access point designed for business environments requiring high-performance Wi-Fi.Offers simultaneous 574Mbps on 2.4GHz and 2402Mbps on 5GHz (2976Mbps in total) Wi-Fi speeds.Supports both 802.3at PoE+ and DC (adapter included) power supply for flexible installations.Includes 1 x Gigabit Ethernet (RJ45) port.Package includes: access point, power adapter, ceiling/wall mounting kits, and installation guide.Power supply: 802.3at PoE, 12VDC, or 48V passive PoE.Frequencies: 2.4GHz and 5GHz.Meets or exceeds the CE, FCC, and RoHS standards.Doubles the data at peak transmission times on a single stream with HE160.Omada mesh enables wireless connectivity between access points for extended range and flexible deployment.Omada SDN integration manages the whole network locally or from the cloud via web UI or the Omada app.Intelligent self-organization optimizes the best path between EAPs, while self-healing ensures you stay online even when one AP is disrupted.Ensures that customers enjoy uninterrupted streaming when moving around by switching clients automatically to the access points with the optimal signal.Exceptional performance with compact design ensures simple Wi-Fi installation while saving space.With advanced enterprise security, WPA3 provides more data security for previously unsecured and open Wi-Fi hot spots.System requirements: Microsoft Windows XP/Vista/7/8/10/11 or Linux.2-year manufacturer limited warranty

Purpose-built to survive in the harshest outdoor environments, Aruba 580 Series outdoor access points are designed for the highest levels of performance and greater deployment flexibility – all backed by a limited lifetime warranty. Aruba 580 Series APs deliver the speed and reliability needed for large enterprise and Industrial IoT deployments with high-power Bluetooth and 802.15.4/Zigbee radios and flexible power options..Wireless dual-band (2.4GHz, 5GHz) outdoor access point designed for the highest levels of performance and greater deployment flexibility.Flagship Wi-Fi 6 performance and speed with a maximum aggregate data rate of 2.97 Gbps and dual-band 4x4 radios.Flexible connectivity and power options with support for 5 Gbps SmartRate Ethernet ports or 10Gbps SFP+ ports and 802.3bt Class 6 power or AC power.Supports direct AC power and Power over Ethernet (POE; on port E0 only).Supported frequency bands: 2.400 to 2.4835 GHz (ISM); 5.150 to 5.250 GHz (U-NII-1); 5.250 to 5.350 GHz (U-NII-2A); 5.470 to 5.725 GHz (U-NII-2C); 5.725 to 5.850 GHz (U-NII-3/ISM).Features built in omni-directional antennas (H and V polarized); 5Ghz antennas 4.5dBi uncorrelated avg (5.8dBi peak); 2.4GHz antennas 3.0dBi uncorrelated avg (4.4dBi peak); Bluetooth antenna 4.8dBi peak.Support for 5Gbps NBase-T Ethernet, up to 10Gbps SFP+, and 1Gbps (w/PoE Out).High-power Bluetooth and Zigbee radio for IoT connectivity with support for maximum range and performance.Aruba Intelligent Power Monitoring (IPM) allows the AP to operate if there is not enough PoE power as well as manage heat to prevent overheating in the most extreme environments.State of the art security with WPA3 and Enhanced open.Great for large-scale outdoor environments including universities, large enterprises, and industrial applications.Built to survive the harshest environments, the IP66/67 rated access point survives high wind, extreme temperatures, and moisture.Lifetime manufacturer limited warranty

The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller..Type of Product: Wireless Access Point.Adapter Speed: 1300Mbit/s.Number of ports and Type: Gigabit Ethernet 2, PoE PD Port.Dimensions as H x W x D in inches: 7.7 x 7.7 x 1.4.Power Rating/Voltage: DC Input Power, Consumption 9 W.Frequency Range: 2.4 GHz, 5 GHz Dual-Band.Support/Encryption: Guest Portal/Hotspot Support.Warranty 1 Year.Form factor: Wall mountable, ceiling mountable.Wireless transmission speed: 1.27 Gbps, 2.4 GHz speed: 450 Mbps, 5 GHz speed: 1300 Mbps.Have 200+ concurrent clients.Supports guest traffic isolation.Intuitive UniFi controller software delivers powerful performance and intelligent switching.Design: Expandable.Contains wall/ceiling kits.Meets CE, FCC, IC certifications and standards.The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3x3 MIMO technology in a refined industrial design and is ideal for deployment of maximum‑performance wireless networks.

Ceiling-mounted WiFi 7 AP with six spatial streams and 6 GHz support for interference-free Wi-Fi in demanding, large-scale environments..Ceiling-mounted tri band access point or interference-free Wi-Fi in demanding, large-scale environments.802.11a/b/g/n/ac/ax/be with six spatial streams and 6 GHz support with up to 5.7 Gbps throughput rate.Offers Wi-Fi AX and BE support.Contains 2.5 GbE uplink port.Powered using PoE+.Works on 2.4 GHz, 5 GHz and 6 GHz frequencies.Meets or exceeds CE, FCC, IC standards.Made of polycarbonate and metal in white

The Tenda i27 is a Wi-Fi 6 ceiling-mounted access point designed to deliver high-speed wireless connectivity for medium to large spaces. Ideal for businesses, offices, and homes with high-density device usage, the i27 supports the latest Wi-Fi 6 (802.11ax) technology, offering a combined wireless speed of up to 2976 Mbps across dual bands. The 5 GHz band delivers speeds of up to 2400 Mbps, while the 2.4 GHz band supports speeds of up to 576 Mbps. This access point features OFDMA and MU-MIMO technologies, enhancing performance in environments with many connected devices by allowing simultaneous data transmission to multiple devices. It also supports Power over Ethernet (PoE), simplifying installation by reducing the need for additional power sources. With a sleek, ceiling-mountable design, the i27 is built for high coverage and strong signal strength. It includes WPA3 encryption for enhanced security, ensuring the protection of your network from unauthorized access. The device is easy to manage via the Tenda cloud platform, providing both web-based and mobile interface options for quick configuration and monitoring. The Tenda i27 is the perfect solution for those seeking reliable, high-performance Wi-Fi 6 access points that can handle dense device environments while maintaining strong coverage and security..The Tenda i27 supports dual-band wireless connectivity, offering both 2.4 GHz and 5 GHz bands for reliable coverage and higher speeds. It is designed for use as a ceiling-mounted access point, ideal for providing Wi-Fi coverage in large spaces..Utilizes the Wi-Fi 6 (802.11ax) wireless standard, delivering a maximum data transfer rate of up to 2976 Mbps, with 2400 Mbps on the 5 GHz band and 576 Mbps on the 2.4 GHz band..Supports Power over Ethernet (PoE), allowing for easy installation without the need for separate power sources. It operates on the Wi-Fi 6 (802.11ax) standard for improved speed, capacity, and performance in high-density environments..Provides wireless connectivity using the latest Wi-Fi 6 technology, offering enhanced performance, faster speeds, and greater efficiency, especially in environments with multiple devices..The access point is equipped with an Ethernet port for network connection and supports PoE for power delivery, simplifying the installation process..The package includes the Tenda i27 access point, mounting brackets for easy ceiling installation, and a user manual for setup and configuration..Powered via Power over Ethernet (PoE), eliminating the need for a separate power adapter and simplifying the installation process..Operates on two frequency bands: 2.4 GHz and 5 GHz, providing dual-band coverage for optimized speed and range..Complies with the latest Wi-Fi 6 (802.11ax) standards and includes WPA3 encryption for enhanced security. It also adheres to industry standards for performance and reliability..1-year limited warranty, ensuring peace of mind for your purchase and ongoing support.

The UniFi nanoHD AP has a refined industrial design and can be easily installed using the included mounting hardware. Easily accessible through any standard web browser and the UniFi Network mobile app (iOS or Android), the UniFi Network Application is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance..Dual-band access point for over 200 clients.Supports ac wireless standard with 6.5Mbps to 1.7Gbps and 58Mbps to 1.7Gbps data transfer rates.Powered using PoE+ and supports Wi-Fi 6E standard.Contains 1 x 1GbE RJ45 port.Includes: mounting plate, ceiling backing plate, and hardware kit.Works on 2.4/5GHz frequencies.Meets or exceeds the CE, FCC, IC, and cULus standards.Covers up to 1500 sq. ft..Supported voltage range: 44-57VDC.Maximum power consumption: 10.5W.Can be wall- or ceiling-mounted.PoE power adapter included.1 Year Warranty.Omni-directional 802.11ac Wave 2 Wi-Fi Access Point with 4x4 MU-MIMO technology. The price / performance leader in enterprise Wi-Fi.

The Ubiquiti UniFi UAP-AC-PRO 1300 Mbps wireless access point is a cost-effective solution for developing high-performance wireless networks. This wireless access point features the latest Wi-Fi 802.11ac technology in a refined industrial design for reliable performance. This white access point measuring 1.4" x 7.7" dia, has two 10/100/1000 Ethernet ports/interfaces for connectivity. It supports wireless data transmission rate up to 1300 Mbps at 5 GHz frequency band and 450 Mbps at 2.4 GHz frequency band..Wireless access point to connect your wireless devices to a wired network.Dimensions: 1.4"H x 7.7"Dia.Color: White.Wireless LAN standard: IEEE 802.11ac.Ports/interfaces: Two 10/100/1000 Ethernet.Wireless transmission speed: 1300 Mbps (5 GHz), 450 Mbps (2.4 GHz).Frequency band: 2.4 GHz/5 GHz.Operating range: 122 m.Antenna: Three internal MIMO.Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES).Power consumption: 9 W.Advanced traffic management: VLAN, Advanced QoS, Guest Traffic Isolation, WMM, 200+ concurrent clients.Mounting: Wall/ceiling.Includes wall/ceiling kits.Meets CE, FCC, IC certifications and standards.Weight: 12.4 oz., 15.9 oz. (with mounting kit)

Small businesses are facing a number of challenges - challenges that need constant attention. The right technology can help you stay on top of them and stay ahead of the curve. Technologies like the ones found inside the AP22. To meet the increasing needs and volumes of connected devices, Aruba Instant On is announcing its Wi-Fi 6 access point: AP22. Delivering higher capacity and greater performance at a competitive price, the AP22 is the perfect access point for small businesses with expanding mobile, cloud, and IoT requirements. Wi-Fi 6 AP22 access points deliver faster Wi-Fi speeds, greater capacity, and reduced latency between access points and devices for a superior Wi-Fi experience. With the AP22, you can upgrade your Wi-Fi network to boost performance across devices now, while preparing it for more mobile and IoT devices in the future.Already have a demanding mobile and/or IoT environment? Delivering 4x the capacity of 802.11ac access points, AP22 can provide an exceptional user experience in a broad variety of scenarios. Remote offices. Hybrid classrooms. Hotels and restaurants. Reimagined retail and hospitality. The AP22 can handle them all without breaking a sweat.Wi-Fi plays the critical role in business today. No business can't afford downtime. The Aruba Instant On AP22, at every level, is designed for rapid deployment and simplified management. Be it mounting hardware, or remote device management, or having access to the advanced business-grade software, the AP22 lives to make your life easier..Conveniently expands your network to hard-to-wire areas – nearly eliminating spotty connections and dead zones, providing Wi-Fi where you need it..Aruba Instant On AP22 Indoor Access Points come with integrated Wi-Fi Alliance security standard WPA2/WPA3 and Enhanced Open support for protected wireless access..Aruba Instant On AP22 Indoor Access Points are ideal for single or distributed small business sites such as graphic design firms, cafés, restaurants, and other Wi-Fi hotspots..Allows access points (APs) to handle multiple Wi-Fi 6-capable clients on each channel simultaneously - regardless of device or traffic type. This improves efficiency by boosting overall capacity, while reducing latency..Ideal for IoTs that communicate infrequently, TWT establishes a schedule for when clients need to communicate with an AP. This helps reduce power consumption, extending the battery life of clients..Allows you to serve multiple clients (Wi-Fi 5 and Wi-Fi 6) at the same time..Enables a 25% data increase over 256 QAM, improving throughput in your access points and devices..Aruba Instant On access points have an installed TPM for secure storage of credentials, keys, and boot codes..Allows the network to assign a "color" tag to a channel and reduce the threshold for interference. Network performance is improved because APs on the same channel can be closer together and still transmit at the same time - as long as they are different colors..Uses built-in filtering to automatically minimize the impact of interference from cellular networks, distributed antenna systems (DAS), and commercial small-cell or femtocell equipment..Delivers high-efficiency error correction for increased throughput..Stop unwanted people and bots from accessing your network. Leverage advanced features that do not require external gateways - or the complexity that comes with them. Quickly and easily swap it out with another AP in a single click, in case of gateway failure..Every customer has different environment. They might want to authenticate with the ISP's PPPoE server and provide static IP to the APs..Keep users connected via softphones and mobile apps. Automatically detect and prioritize voice and video applications such as Skype, FaceTime, and WeChat that use SIP, SCCP and other popular protocols..Aruba Instant On AP22 Indoor Access Points have built-in wireless mesh capabilities to cost-effectively extend Wi-Fi connectivity without additional cables.

The Grandstream GWN7662 is a high-performance AX6000 Wi-Fi 6 indoor access point designed for small-to-medium businesses and high-density environments. Featuring dual-band MU-MIMO with OFDMA technology, it delivers up to 5.38Gbps wireless throughput and supports 256 concurrent clients. With embedded controller management, dual Gigabit ports, and PoE/PoE+ support, the GWN7662 ensures seamless deployment and reliable performance for voice-over-Wi-Fi and real-time applications..Dual-band indoor use with enterprise-grade access point capability..AX6000 standard and 5380Mbps wireless data transfer performance..PoE/PoE+ and integrates Wi-Fi 6 for modern network efficiency..802.11 a/b/g/n/ac(Wave-2)/ax wireless connectivity protocols..Includes 1G and 2.5G Ethernet ports, reset pinhole, and Kensington lock..Mounting kits and a quick installation guide for setup..Powered via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz bands for extended indoor coverage..Certified under FCC, CE, RCM, IC, UKCA for global compliance..1-year manufacturer warranty.

The Grandstream GWN7661 is a sleek in-wall AX1800 Wi-Fi 6 access point designed for small-to-medium businesses, hotels, and residential spaces. With dual-band 2×2:2 MU-MIMO and OFDMA technology, it delivers up to 1.77Gbps wireless throughput and supports over 500 concurrent clients. Featuring four Gigabit Ethernet ports, PoE/PoE+ support, and embedded controller management, it ensures seamless connectivity for both wired and wireless devices while blending discreetly into any environment..Dual-band in-wall use with enterprise-grade access point design..AX1800 standard and 1770Mbps wireless data transfer performance..PoE/PoE+ and integrates Wi-Fi 6 for modern network efficiency..802.11 a/b/g/n/ac/ax wireless connectivity protocols..4x 1G Ethernet ports and a reset pinhole interface..Mounting kits and a quick installation guide for setup..Powered via Ethernet using 802.3af/802.3at PoE standards..2.4GHz and 5GHz bands for reliable indoor coverage..Certified under FCC, CE, RCM, IC, UKCA for global compliance..1-year manufacturer warranty.

Ubiquiti wall-mounted WiFi 6 AP with 6 spatial streams and a built-in 4-port switch ideal for single-room coverage in hospitality environments..Wireless dual band (2.4GHz, 5GHz) access point perfect for single-room coverage in hospitality environments.Throughput rate: 573.5Mbps (2.4GHz), 4.8Gbps (5GHz).One out port with PoE support and one GbE PoE/PoE+ in port.Wi-Fi 6 certification supports all mandatory 802.11a/b/g/n/ac/ax features that include MU-MIMO 2 x 2 UL (2.4GHz), 4 x 4 DL/UL (5GHz).Contains 1 x data-in: GbE RJ45 port, and 4 x data-out: GbE RJ45 ports.Power over Ethernet (PoE): 48V.Meets or exceeds the CE, FCC, IC standards.Power consumption: 13.5W (excluding PoE output) maximum.Provides support for WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) wireless security.Supported guest traffic isolation and more than 300 devices.Dimensions: 5.5"H x 3.8"W x 1.3"D

The HPE Networking Instant On access point AP32 is a Wi-Fi certified 6E wireless access point built to bring future-ready connectivity to small and medium businesses. The Instant On AP32 supports the 6E wireless protocol that broadcasts on the 6GHz band, which is reserved for Wi-Fi 6E-enabled devices, and offers higher capacity and capability for the devices. This higher capacity needs a strong backhaul, so the Instant On AP32 comes with a 2.5GbE uplink port and PoE to make connectivity and power easy. With a 2x2 antenna array supporting two spatial streams, the Instant On AP32 provides robust connectivity for up to 75 devices and 2.8Gbps of wireless throughput. In the Instant On mobile app, choose to broadcast the 5GHz and 6GHz bands to achieve faster throughput speed, or switch to 2.4GHz and 6GHz for impressive range for modern laptops or smartphones..Wireless tri band (2.4GHz, 5GHz, 6GHz) access point intended for enterprises that need more wireless capacity and/or wider channels.With 6GHz band dedicated band you'll experience lower latency and faster trans­mit rates (up to 3.6 Gbps) for your Wi-Fi 6 enabled devices.One port with PoE support.Wi-Fi 6E certification supports all mandatory 802.11ax features that include MU-MIMO, OFDMA, TWT, and more; supports PoE.Contains a 2.5 Gigabit Ethernet uplink port with PoE-in support (802.3at) and a DC power connector.Power over Ethernet (PoE): 802.3at (Class 4), 12VDC.This Tri-band, dual radio access point offers different broadcasting configurations: 6GHz and 5GHz for impressive throughput, 2.4GHz and 6GHz to support IoT wireless devices, and 2.4GHz and 5GHz for businesses not yet ready to use Wi-Fi 6E wireless standards.Power consumption: 12.9W (PoE), 11W (DC).Access point has an installed TPM for secure storage of credentials, keys, and boot codes.Access point ships with a white mount clip that can attach to both wall and ceiling.Provides support for WPA2/WPA3/OWE authentication for secure Wi-Fi access.With the HPE Networking Instant On mobile app, you can apply bandwidth limits for your clients or your network to prioritize certain networks.1024-quadrature amplitude modulation (1024-QAM) improves throughput to access points and devices.Low-density parity check (LDPC) delivers high-efficiency error correction for increased throughput.Easily manage and update the Instant On AP32 band setting in the HPE Networking Instant On mobile app from anywhere.This access point is for businesses that have invested in PoE infrastructure throughout their facility, as these SKUs will ship without a PSU.Dimensions: 6.3"H x 6.3"W x 1.54"D.2-year manufacturer limited warranty