Home Wireless Access Points

Powerful and affordable 5 GHz sector access point. GPS synchronized units provide up to 450+ Mbps data throughput. Introducing the Ubiquiti airMAX LiteAP AC, the latest high-performance access point with disruptive pricing. Featuring an ultra-lightweight form factor, the Ubiquiti airMAX LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Each of these models operates in the worldwide, license-free 5 GHz frequency range with high-performance speeds..Powerful access point that creates a wireless local area network.Dimensions: 14.21"H x 4.9"W x 2.81"D.Comes in white.Equipped with 10/100/1000 Ethernet port.Minimal fasteners simplify installation.Ball-joint mount provides adjustment flexibility for versatile mounting options.Features a lightweight antenna with an integrated radio in a sleek design.Delivers high throughput over its wired connection.Precise GPS frame synchronization enables colocated devices to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability.Integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Pole mounting kit included.Meets or exceeds FCC, IC, CE standards.2-year manufactuer limited warranty

Ubiquiti Networks designed airMAX AC radios for high performance and ease of installation. You have the freedom to deploy the Bullet AC anywhere in the world, as it allows for a high degree of flexibility in configuring channel bandwidths (subject to local country regulations. The Bullet AC eliminates the need to use RF cables and requires no special antenna or tools to install. There are no radio card / host board issues, no RF cable quality concerns, no mechanical stability concerns, and no enclosure mounting requirements. With the Bullet AC, operators can just plug in and go..Access Point is a fully integrated radio that delivers up to 300+ Mb/s real TCP/IP throughput.Dimensions: 7.48"H x 1.81"W x 1.81"D.Access point covers both 2.4GHz and 5GHz radio bands, covering a wide range of frequencies that work well for both short- and long-distance links.Meets or exceeds CE, FCC, and IC certifications.Networking interface: Gigabit Ethernet port; antenna connector: N-type connector.Throughput 160+ Mb/s at 2.4GHz, 300+ Mb/s at 5GHz.Maximum power consumption: 8W; output power: 22dBm.Power supply: 24VDC, 0.3A (minimum); power method: 24V passive PoE (pairs 4, 5+; 7, 8 return).ESD/EMP protection: +/- 24kV contact/air.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity 5% to 95% noncondensing.ETSI300-019-1.4 shock and vibration.1-year manufacturer limited warranty

High-Density Applications Powered by MU-MIMO Technology 802.11ac Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP to communicate with multiple clients at the same time - significantly increasing multi-user throughput and overall user experience. Radio Hardware Acceleration Independent 2.4 GHz and 5 GHz dedicated hardware offload for maximized multi-user throughput and reduced latency CPU Hardware Acceleration Dedicated hardware offload for QoS, Guest Control, and Client Management Optimized for MU-MIMO Antenna System Optimized for 802.11ac Wave 2 MU-MIMO Beamforming Beamforming Data is sent and received using multiple antennas to increase throughput and range. Advanced Features in UniFi Controller UniFi is quickly expanding to a full Software Defined Networking (SDN) solution with seamless integration of high-performance switching, gateways, and more...Type of Product: Wireless Access Point.Adapter Speed: 1733Mbit/s.Number of ports and Type: Gigabit Ethernet 2, PoE PD Port.Dimensions as H x W x D in inches: 8.7 x 8.7 x 1.9.Power Rating/Voltage: DC Input Power, Consumption 17 W.Powerful Hardware The UniFi AC HD AP features the latest in Wi-Fi 802.11ac Wave 2 MU-MIMO technology..Expandable Unlimited scalability: build wireless networks as big or small as needed. Start with one (or upgrade to a five-pack) and expand to thousands while maintaining a single unified management system..Frequency Range: 2.4 GHz, 5 GHz Dual-Band.Support/Encryption: Guest Portal/Hotspot Support.Warranty 1 Year.UniFi is quickly expanding to a full Software Defined Networking (SDN) solution with seamless integration of high‑performance switching, gateways, and more

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..AP-577 (US) 802.11ax 2x2:2/4x4:4 dual radio integrated directional antenna outdoor AP.Built in 90°H x 90°V directional antennas: 5 GHz (antennas 5.6dBi), 2.4 GHz (antennas 6.8dBi), BLE/Zigbee (Integrated omnidirectional antennas with peak gain of 8.4dBi).Ports: one HPE SmartRate port (RJ-45), one 100/1000BASE-T (RJ-45), USB-C.Security: WPA3 and Enhanced Open, MPSK enables simpler passkey management for WPA2 devices, a secure SSL/IPSec VPN tunnel and installed TPM for secure storage of credentials, keys and boot code.Dimensions: 5.6"H x 9.0"W x 8.7"D.Lifetime manufacturer limited warranty

The Cisco Catalyst access points are the next generation of enterprise access points. They are resilient, secure, and intelligent. We are more dependent on our wireless networks than ever before. Additional devices connect to the network every year, and the Cisco Catalyst access points will provide a seamless experience anywhere for everyone. Going beyond the Wi-Fi 6 (802.11ax) standard, the access point provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending intent-based network and perfect for networks of all sizes, the Cisco Catalyst scales to the growing demands of IoT while fully supporting the latest innovations and new technologies and is a leader in performance, security, and analytics. The Cisco Catalyst access points, paired with Cisco DNA, are enterprise-class products that will address your current and future needs. These access points are the first step in updating your network so that you can take better advantage of all of the features and benefits that Wi-Fi 6 provides..Access point for indoor environments, with internal antennas provides a seamless experience anywhere for everyone.Dimensions: 8.5"H x 8.5"W x 1.7"D.Comes in white.Wi-Fi 6 (802.11ax) delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT.Features software-defined radio (SDR) that can perform advanced RF spectrum analysis and delivers other features, such as Cisco CleanAir, wireless intrusion prevention system (wIPS), and DFS detection.Orthogonal frequency-division multiple access (OFDMA) based scheduling splits the bandwidth into smaller chunks called resource units (RUs), which can be allocated to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting four spatial streams, multi-user, multiple-input, multiple-output (MU-MIMO) enables access points to split spatial streams between client devices, to maximize throughput.Spatial reuse allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.Target wake time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis.Flexible radio assignment allows the access points to intelligently determine the operating mode of serving radios based on the RF environment.Dual 5GHz radio support enables both radios to operate in 5GHz client serving mode, allowing industry-leading 5.2Gbps (2 x 2.6Gbps) over-the-air speeds while increasing client capacity.Application hosting helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks.Provides uplink speeds of 2.5Gbps, in addition to 100Mbps and 1Gbps.Features Integrated Bluetooth Low Energy (BLE) 5 radio to enable IoT use cases such as location tracking and wayfinding.Enables edge computing capabilities for IoT applications on the host access point.Creates an optimal mobile experience for iOS devices on corporate networks based on Cisco technologies.Lifetime manufacturer limited warranty

Enhance your small-to-midsize business with fast and reliable Wi-Fi connections by connecting the Cisco Business 240AC Dual-Band Wireless Access Point to your compatible network router or switch. This kit includes three dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 2333 Mb/s over the 2.4 GHz and 5 GHz frequencies. Both of the 240AC's Gigabit Ethernet ports support 802.3af/at power over Ethernet, allowing you to transfer both data and power over a single cable, which can be passed through to IP cameras and other devices when connected to a compatible switch..Dual-Band Wireless Access Point.Wi-Fi 5 (802.11ac) Wave 2.Up to 2333 Mb/s Throughput.2.4 GHz / 5 GHz (Dual-Band).Internal Omnidirectional Antennas.2 x Gigabit Ethernet PoE Ports.4x4 MIMO.Wall & Ceiling Mountable.Works with Cisco Business Mobile App.Warranty Limited Lifetime

The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller..Type of Product: Wireless Access Point.Adapter Speed: 1300Mbit/s.Number of ports and Type: Gigabit Ethernet 2, PoE PD Port.Dimensions as H x W x D in inches: 7.7 x 7.7 x 1.4.Power Rating/Voltage: DC Input Power, Consumption 9 W.Frequency Range: 2.4 GHz, 5 GHz Dual-Band.Support/Encryption: Guest Portal/Hotspot Support.Warranty 1 Year.Form factor: Wall mountable, ceiling mountable.Wireless transmission speed: 1.27 Gbps, 2.4 GHz speed: 450 Mbps, 5 GHz speed: 1300 Mbps.Have 200+ concurrent clients.Supports guest traffic isolation.Intuitive UniFi controller software delivers powerful performance and intelligent switching.Design: Expandable.Contains wall/ceiling kits.Meets CE, FCC, IC certifications and standards.The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3x3 MIMO technology in a refined industrial design and is ideal for deployment of maximum‑performance wireless networks.

The Ubiquiti® airCube-AC Series ACB-AC-US wireless access point in black, has a sleek design with durable plastic construction. It features 4 Gigabit Ethernet ports with data transfer rate of up to 1.14 Gbps. The dual band access point utilizes 802.11ac and 2x2 MIMO technologies for reliable performance. It has throughput of up to 300 Mbps in 2.4 GHz radio band and up to 866.7 Mbps in 5 GHz radio band. This access point with super antenna, ensures UNMS and U mobile support. It is suitable for use in your customer deployments..Wi-Fi access point is perfect for use in customer deployments.Dimensions: 3.52"H x 3.51"W x 3.46"D.Comes in black color with plastic construction.Interfaces/ports: 4 x Gigabit Ethernet port.Wireless LAN: 802.11ac 2x2.Gain: 4 dBi at 2.4 GHz, 5 dBi at 5 GHz.Frequency: Dual band 2.4 GHz, 5 GHz simultaneously.Power supply: 24 Volt PoE or 24 Volt PSU in on LAN port 1.Wireless transmission speed: 1.14 Gbps.Maximum power consumption: 8.5 W, temperature: -10 to 50 deg C (operating), humidity: 5 to 95 percent noncondensing (operating).Throughput: Up to 300 Mbps in the 2.4 GHz radio band, Up to 866.7 Mbps in the 5 GHz radio band.Features UNMS support, super antenna, U mobile support and sleek design.Features 22 dBm maximum TX power, status LED and UNMS app for fast setup from a mobile device.Features PoE pass-through, Powers airMAX device, with PoE in/out, controllable 24 V PoE out on WAN port technology.Meets CE, FCC, IC standards.Weight: 9.88 oz.

Tenda AC1200 i24 is a gigabit dual-band ceiling access point that is compliant with IEEE 802.11ac Wave 2 and offers a concurrent data rate up to 1167Mbps. Powered by MU-MIMO technology, letting you enjoy a better experience. And the built-in omnidirectional antennas broaden the wireless coverage of a single AP. In addition, you are allowed to adjust its transmit power as required using the web UI and use an IEEE 802.3at-compliant PoE sourcing equipment to power on it, achieving long-distance power supply without tampering your existing grid network. You can use Tenda access controllers (AC) to configure and manage multiple i24 in a centralized manner..Gigabit dual-band ceiling access point provides satisfying wireless Internet connection for desktop computers, notebooks, and other devices.Up to 1317Mbps dual-band data rate and 1000Mbps Ethernet port let you enjoy ultrafast Internet connections.Contains Ethernet and DC power ports.Dimensions: 7.01"H x 7.01"W x 1.5"D.Maximum power consumption: full-load 13.5W.Allows clients that support either 2.4GHz or 5GHz band, or both, to connect to it at the same time, tripling the quantity of connected clients of traditional single-band AP.Meets or exceeds CE, FCC, and RoHS standards.Wireless security: WEP, WPA2-PSK, WPA-PSK, WPA2, WPA.Optimized antennas make it outstanding in radiating wireless signals and broadening wireless coverage.Featuring air interface scheduling, it can evenly allocate air interface resources, thus improving your wireless network speed as a whole by preventing clients with low data rate from consuming too much network resources.It also allows you to customize the RSSI threshold value so that you can disconnect clients that do not reach the RSSI.Powered by multiple interference-mitigation technologies, it automatically chooses the best channel and adjusts the transmit power to a reasonable value, significantly optimizing wireless signals by mitigating co-channel interference and electromagnetic interference (EMI).You are allowed to set multiple SSIDs and enabled to add VLAN tags for SSIDs with the IEEE 802.11q VLAN-compliant feature so as to protect the security of your network.You can use an IEEE 802.3at-compliant PoE sourcing equipment or a DC power adapter to power on it.You are allowed to configure and manage multiple i24 in a centralized manner through all Tenda access controllers (AC) and enterprise routers that include AC functionality and enjoy simple management, configuration, and monitoring of all access points.Comes in white

Netgear Insight is a high-performance Wi-Fi 6 access point, perfect for small and medium-sized businesses. The access point is a dual band 4x4 design delivering up to 3.6Gbps total Wi-Fi throughput, supported by a 2.5Gbps Power-over-Ethernet port, an industry leader of performance and cost effectiveness in its product class. Supports the next generation Wi-Fi 6 smartphones, IoT devices, and notebook computers, delivering up to 40% more throughput to each individual device in the 5GHz band and 100% more throughput in the 2.4GHz band, compared to the previous generation equivalent model; provides 4x the client device connection, allowing businesses to serve more customers with better speed and less congestion. This access point is great in high density client device environments such as schools, hotels, restaurants and conference centers, and provides enterprise grade Wi-Fi network security. With Insight management, AP works seamlessly with your current Netgear Insight managed switches, Wi-Fi access points and network storage, and is compatible with previous generation Wi-Fi devices (Wi-Fi 5 802.11ac for example) and Wi-Fi access points..High-performance Wi-Fi 6 access point is perfect for small- and medium-sized businesses.Dual-band 4x4 (2.4GHz and 5GHz) eight streams of data for an aggregate throughput of up to 3.6Gbps.Contains 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X), supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Dimensions: 1.35"H x 8.09"W x 8.09"D.Business class Wi-Fi based on next-generation 802.11ax Wi-Fi 6 technology on both 5GHz and 2.4GHz bands, backward compatible with 802.11b/g/n/a/ac.40% more throughput in four-stream 5.0GHz band and 100% more throughput in four-stream 2.4GHz band compared to previous generation.Four times more client device supported.Enterprise security and Enhanced Open security, such as WAP3, WPA Enterprise, 8x SSID, and VLAN.Basic Service Set Coloring (BSS Coloring) enabling significant improvement in radio frequency channel efficiency and reduction of interference.Orthogonal Frequency Division Multiple Access (OFDMA) allowing simultaneous services to multiple devices in the same channel thus improving bandwidth efficiency and reducing latency.Target Wake Time (TWT) allows for more efficient power usage resulting in longer battery life in Wi-Fi 6 client devices.Beamforming+; advanced 6th Gen Wi-Fi technology such as upstream and downstream MU-MIMO.Remote management and monitoring from Netgear Insight app or Cloud Portal for unrivaled management experience of your wireless network.PoE power consumption: 25.5W.Box contains: access point, wall/ceiling mount kit, installation guide, power adapter.5-year manufacturer limited warranty

Weatherproof and temperature hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The high-performance and high power 570 Series APs deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services..AP-575 (US) 802.11ax 2x2:2/4x4:4 dual radio integrated omni-antenna outdoor AP.Built in omni directional antennas: 5 GHz (antennas 5dBi), 2.4GHz (antennas 3.4dBi), BLE/Zigbee (integrated omnidirectional antenna and the peak gain of 6dBi).Ports: one HPE SmartRate port (RJ-45), one 100/1000BASE-T (RJ-45), USB-C.Security: WPA3 and Enhanced Open, MPSK enables simpler passkey management for WPA2 devices, a secure SSL/IPSec VPN tunnel and installed TPM for secure storage of credentials, keys and boot code.Dimensions: 10.6"H x 9.4"W x 9.4"D.Lifetime manufacturer limited warranty

The TP-LINK AX3000 dual-band Wi-Fi 6 access point is designed for business environments requiring high-performance Wi-Fi. Next-era business Wi-Fi 6 with speeds up to 2976Mbps brings more than twice the speed of Wi-Fi 5. Every application feels more fluid with drastically improved Wi-Fi speeds. Wi-Fi 6 features such as OFDMA and MU-MIMO handle multiple clients across congested environments like typical office spaces, lodging, and hospitals. Enjoy faster speeds on more devices with less lag..Dual-band Wi-Fi 6 access point designed for business environments requiring high-performance Wi-Fi.Offers simultaneous 574Mbps on 2.4GHz and 2402Mbps on 5GHz (2976Mbps in total) Wi-Fi speeds.Supports both 802.3at PoE+ and DC (adapter included) power supply for flexible installations.Includes 1 x Gigabit Ethernet (RJ45) port.Package includes: access point, power adapter, ceiling/wall mounting kits, and installation guide.Power supply: 802.3at PoE, 12VDC, or 48V passive PoE.Frequencies: 2.4GHz and 5GHz.Meets or exceeds the CE, FCC, and RoHS standards.Doubles the data at peak transmission times on a single stream with HE160.Omada mesh enables wireless connectivity between access points for extended range and flexible deployment.Omada SDN integration manages the whole network locally or from the cloud via web UI or the Omada app.Intelligent self-organization optimizes the best path between EAPs, while self-healing ensures you stay online even when one AP is disrupted.Ensures that customers enjoy uninterrupted streaming when moving around by switching clients automatically to the access points with the optimal signal.Exceptional performance with compact design ensures simple Wi-Fi installation while saving space.With advanced enterprise security, WPA3 provides more data security for previously unsecured and open Wi-Fi hot spots.System requirements: Microsoft Windows XP/Vista/7/8/10/11 or Linux.2-year manufacturer limited warranty

i24 is a gigabit dual-band ceiling access point that compliant with IEEE 802.11ac Wave 2, and offers a concurrent data rate up to 1167 Mbps. Powered by MU-MIMO technology, letting you enjoy better experience. And the built-in omni-directional antennas broaden the wireless coverage of a single AP. In addition, you are allowed to adjust its transmit power as required using the web UI, and use an IEEE 802.3at-compliant PoE sourcing equipment to power on it, achieving long-distance power supply without tampering your existing grid network. You are also allowed to use Tenda access controllers (AC) to configure and manage multiple i24 in a centralized manner..Access point operates on two wireless bands . The dual-band capability allows for more flexible and efficient wireless connectivity, making it suitable for both home and small business environments..Supports the 802.11ac Wave 2 wireless standard. It offers a maximum data transfer rate of 1167 Mbps (1.167 Gbps).This access point supports Power over Ethernet (PoE). it adheres to the Wi-Fi 5 standard, ensuring high-speed and reliable wireless connectivity..Provides robust wireless connectivity with the following features: Dual-Band Support: Operates on both 2.4 GHz and 5 GHz bands for flexible and efficient connectivity..includes the following connector, port, and interface types: One 10/100/1000 Mbps Ethernet Port (PoE) RESET Button SYS LED Indicator.In the box : Tenda I24 Access Point Power Adapter (DC: 12V 1A) Ethernet Cable User Manual Quick Installation Guide.Can be powered using: Power over Ethernet (PoE) DC power adapter (DC: 12V 1A).Certified by : Restriction of Hazardous Substances (RoHS)..Comes with a 3 year limited warranty.

Netgear Insight is a high-performance Wi-Fi 6 access point, perfect for small and medium-sized businesses. The access point is a dual band 4x4 design delivering up to 3.6Gbps total Wi-Fi throughput, supported by a 2.5Gbps Power-over-Ethernet port, an industry leader of performance and cost effectiveness in its product class. Supports the next generation Wi-Fi 6 smartphones, IoT devices, and notebook computers, delivering up to 40% more throughput to each individual device in the 5GHz band and 100% more throughput in the 2.4GHz band, compared to the previous generation equivalent model; provides 4x the client device connection, allowing businesses to serve more customers with better speed and less congestion. This access point is great in high density client device environments such as schools, hotels, restaurants and conference centers, and provides enterprise grade Wi-Fi network security. With Insight management, AP works seamlessly with your current Netgear Insight managed switches, Wi-Fi access points and network storage, and is compatible with previous generation Wi-Fi devices (Wi-Fi 5 802.11ac for example) and Wi-Fi access points..High-performance Wi-Fi 6 access point is perfect for small- and medium-sized businesses.Dual-band 4x4 (2.4GHz and 5GHz) eight streams of data for an aggregate throughput of up to 3.6Gbps.Contains 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X), supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Dimensions: 1.35"H x 8.09"W x 8.09"D.Business class Wi-Fi based on next-generation 802.11ax Wi-Fi 6 technology on both 5GHz and 2.4GHz bands, backward compatible with 802.11b/g/n/a/ac.40% more throughput in four-stream 5.0GHz band and 100% more throughput in four-stream 2.4GHz band compared to previous generation.Four times more client device supported.Enterprise security and Enhanced Open security, such as WAP3, WPA Enterprise, 8x SSID, and VLAN.Basic Service Set Coloring (BSS Coloring) enabling significant improvement in radio frequency channel efficiency and reduction of interference.Orthogonal Frequency Division Multiple Access (OFDMA) allowing simultaneous services to multiple devices in the same channel thus improving bandwidth efficiency and reducing latency.Target Wake Time (TWT) allows for more efficient power usage resulting in longer battery life in Wi-Fi 6 client devices.Beamforming+; advanced 6th Gen Wi-Fi technology such as upstream and downstream MU-MIMO.Remote management and monitoring from Netgear Insight app or Cloud Portal for unrivaled management experience of your wireless network.PoE power consumption: 25.5W.Box contains: access point, wall/ceiling mount kit, installation guide.5-year manufacturer limited warranty

The Ubiquiti UniFi UAP-AC-PRO 1300 Mbps wireless access point is a cost-effective solution for developing high-performance wireless networks. This wireless access point features the latest Wi-Fi 802.11ac technology in a refined industrial design for reliable performance. This white access point measuring 1.4" x 7.7" dia, has two 10/100/1000 Ethernet ports/interfaces for connectivity. It supports wireless data transmission rate up to 1300 Mbps at 5 GHz frequency band and 450 Mbps at 2.4 GHz frequency band..Wireless access point to connect your wireless devices to a wired network.Dimensions: 1.4"H x 7.7"Dia.Color: White.Wireless LAN standard: IEEE 802.11ac.Ports/interfaces: Two 10/100/1000 Ethernet.Wireless transmission speed: 1300 Mbps (5 GHz), 450 Mbps (2.4 GHz).Frequency band: 2.4 GHz/5 GHz.Operating range: 122 m.Antenna: Three internal MIMO.Wireless security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES).Power consumption: 9 W.Advanced traffic management: VLAN, Advanced QoS, Guest Traffic Isolation, WMM, 200+ concurrent clients.Mounting: Wall/ceiling.Includes wall/ceiling kits.Meets CE, FCC, IC certifications and standards.Weight: 12.4 oz., 15.9 oz. (with mounting kit)

The NanoStation AC represent the next evolution of the iconic CPE design that revolutionized the wireless ISP industry. The NanoStation AC provides a secondary Ethernet port with software-enabled PoE. Use this port to conveniently power an external device, such as a PoE security camera, for seamless IP video integration. NanoStation AC model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. The NanoStation AC feature enhanced protection against ESD events. airOS8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..Access point has a dedicated Wi-Fi radio for management and is suitable for indoor and outdoor installations.Dimensions: 10.12"H x 3.31"W x 1.18"D.Compatible with airOS 8.Comes in white and made of UV-resistant polycarbonate.Powerful wireless features: access point PtMP airMAX mixed mode, airMAX ac protocol support, long-range point-to-point (PtP) link mode; selectable channel width: PtP (10/20/30/40/50/60/80MHz), PtMP (10/20/30/40MHz); automatic channel selection; transmit power control: automatic/manual; automatic distance selection (ACK timing); strong WPA2 security.Usability enhancements: airMagic channel selection tool, dynamic configuration changes, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including RF diagnostics and airView spectrum analyzer.Features airMAX technology and a dedicated Wi-Fi radio for management.This model utilizes the latest ESD protection to help protect against power surges.The radio and antenna are combined into a single body that takes up minimal space.No fasteners are required for pole‑mounting, and a single wall fastener (not included) is required for wall-mounting.Power supply: 24V, 0.5A Gigabit PoE supply (included); maximum power consumption: 9W.Power method: 802.3af alternative A (pairs 1, 2+; 3, 6 return); 24V passive PoE (pairs 4, 5+; 7, 8 return); gain: 16dBi.Networking interface: 10/100/1000MB/s Ethernet ports; channel bandwidths: 10/20/30/40/50/60/80MHz.Processor specs: Atheros MIPS 74Kc, 560MHz; memory: 64MB DDR2; cross-pol isolation: 20dB minimum.Polarization: dual linear; LEDs: power, Eth1, Eth2; signal strength.Operating temperature: -40 degrees Fahrenheit to 158 degrees Fahrenheit.Operating humidity: 5 to 95% noncondensing.ETSI300-019-1.4 shock and vibration.Meets or exceeds CE, FCC, IC standards

Compact, ceiling-mounted WiFi 6 AP with 4 spatial streams that improves upon the U6 Lite with higher performance and dual-band WiFi 6 support. Ideal for small and medium-sized businesses..Gigabit Ethernet port for ultra-fast wired network speeds.Up to 10x faster than standard Ethernet connectivity for your wired network.3 Gbit/s wireless transmission speed is ideal for fast data transfer with maximum reliability.Data Encryption feature effectively protects your precious and valuable data from unauthorized access.Wall Mountable form factor for your usage convenience and better reliance.Create a reliable wireless business network with this wireless access point that features a high-speed data transfer rate.IEEE 802.11 a/b/g/n/ac/ax wireless LAN standard ensures trouble-free and convenient connectivity

The Cisco Catalyst 9115 series with Wi-Fi 6 is the next generation of enterprise access points. They are resilient, secure, and intelligent. The Catalyst 9115 series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides. With the Catalyst 9115 series, you can secure remote workers or the micro-office. Any Cisco Aironet or Catalyst access point can function as an OfficeExtend access point (OEAP). With an OEAP, an employee at home or in a temporary micro-office will have access to the corporate SSID and the corporate network without the need to set up a VPN or have any advanced technical know-how..Access point with internal antennas for indoor environments.Management console port (RJ45); 1 x 100, 1000, 2500 Multigigabit Ethernet (RJ45): IEEE 802.3bz; USB 2.0 (enabled via future software).Dimensions: 1.7"H x 8"W x 8"D.Integrated antenna: 2.4GHz, 3dBi peak gain, internal antenna, omnidirectional in azimuth; 5GHz, 4dBi peak gain, internal antenna, omnidirectional in azimuth.IEEE 802.11ax emerging standard, also known as High-Efficiency Wireless (HEW) or Wi-Fi 6, builds on 802.11ac.OFDMA-based scheduling splits the bandwidth into smaller chunks called Resource Units (RUs), which can be allocated to individual clients in both the downlink and uplink directions to reduce overhead and latency.New power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and wake up only at prescheduled (target) times to exchange data with the AP.Integrated Bluetooth Low Energy (BLE) 5.0 radio to enable IoT use cases such as location tracking and wayfinding.Lifetime manufacturer limited warranty

The AP 330 is WatchGuard's all-purpose Wi-Fi 6 access point and is the ideal choice for mid-density indoor environments of all sizes to utilize the most secure WPA3 encryption for a seamless experience. Includes 2x2 radio scanning optimized for Wi-Fi 6 with six internal antennas. Maximum TX power delivers 22 dBm and a 2dBi antenna gain with one Ethernet port supporting up to 2.5 Gbps. These Wi-Fi 6 access points deliver a maximum data rate for a seamless wireless experience by supporting up to 1.2 Gbps on the 5 GHz band and 574 Mbps available on the 2.4 GHz band. WatchGuard’s AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points..The WatchGuard AP330 operates on dual bands: the 2.4 GHz and 5 GHz frequencies. It is designed for medium-density indoor environments, such as offices, schools, and retail spaces, providing reliable and high-efficiency Wi-Fi 6 connectivity..It supports the Wi-Fi 6 (802.11ax), standard up to 1.2 Gbps on the 5 GHz band and 0.574 Gbps on the 2.4 GHz band..The WatchGuard AP330 supports PoE (Power over Ethernet) 54V DC 802.3at (PoE+).Supports high-efficiency wireless connectivity with WPA3 encryption..Connector, Port or Interface Types are 1 x 2.5 Gbps Ethernet port (PoE+), 1 x USB port (currently not in use), 1 x RJ45 serial console port..Included Components are Access point unit, mounting hardware, quick start guide..Power Source PoE 54V DC 802.3at..This device have Frequencies of 2.4 GHz and 5 GHz bands..Its has The Restriction of Hazardous Substances (RoHS) is a standard..The WatchGuard AP330 comes with a standard 1-year warranty

The gigabit dual-band indoor/outdoor access point OAP1200 offers a concurrent data rate as high as 1167 Mbps. Equipped with 2 omni-directional high-gain antennas, OAP1200 provides a maximum coverage radius of 200 meters. OAP1200 can be installed either on the wall or around a pole. OAP1200 can meet different requirements by connecting antennas of different specifications to the standard RP-SMA connectors. With the IP65 enclosure, OAP1200 is designed for wireless coverage in factories, warehouses and other harsh outdoor environments..Tenda OAP1200 Outdoor Gigabit Wi-Fi Access Point is a dual-band device that provides high-speed internet connectivity for outdoor areas.Supports the 802.11ac wireless standard, offering a data transfer rate of up to 1167 Mbps on the 5 GHz band..Offers wireless connectivity through the 802.11ac wireless standard.Powered by MU-MIMO technology, a single OAP1200 can communicate with multiple wireless clients at the same time.OAP1200 allows clients that support either 2.4 GHz or 5 GHz band, or both, to connect to it at the same time.Achieve a concurrent data rate of 1167 Mbps, enabling seamless connectivity for multiple devices.With 2 omni-directional high-gain antennas, enjoy a maximum coverage radius of 200 meters, ensuring robust wireless signals across long distances..Mount the OAP1200 on walls or poles for versatile deployment options tailored to your environment.

WatchGuard's AP 130 is an ideal Wi-Fi 6 solution to support low-density indoor environments like a small office or remote workers with a secure WPA3 encryption. Integrated security is delivered by supporting the 802.11 standard and WPA3 encryption to enhance the Wi-Fi experience. Includes Wi-Fi 6 2x2 radio with four internal antennas. Maximum TX power delivers 22 dBm and a 3dBi antenna gain with one Ethernet port supporting up to 1 Gbps. Maximum data rate includes a crystal clear and seamless wireless experience supporting 1.2 Gbps on the 5 GHz band and 574 Mbps available on the 2.4 GHz band. WatchGuard’s AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points..This Dual-Band (2.4 GHz and 5 GHz) Device is designed for low-density indoor environments such as small offices or for remote workers..The WatchGuard AP130 supports the Wi-Fi 6 (802.11ax) standard Here are the maximum data transfer rates 2.4 GHz Band Up to 574 Mbps (0.574 Gbps) 5 GHz Band: Up to 1200 Mbps (1.2 Gbps).The WatchGuard AP130 supports PoE (Power over Ethernet): 54V DC 802.3at (PoE+)12. WiFi Standard: Wi-Fi 6 (802.11ax).Supports high-efficiency wireless connectivity with WPA3 encryption..Connector, Port or Interface Types are 1 x 1 Gbps Ethernet port (PoE+), 1 x USB port (currently not in use), 1 x RJ45 serial console port..Included Components AP130 Access Point Unit, Ceiling Mount T-Rail Brackets, Wall Mount Screws and Spacers, Quick Start Guide.Power source of 54V DC 802.3at (PoE+).Device supports these Frequencies 2.4 GHz and 5 GHz bands..Complies with the Restriction of Hazardous Substances (RoHS) directive, ensuring the product is free from specific hazardous materials and environmentally friendly..The WatchGuard AP130 comes with a standard 1-year hardware warranty.

The AP 430 CR is perfect for high-density deployments that include an industrial-rated IP67 enclosure, designed for either indoor or rugged outdoor deployment with superior Wi-Fi 6 performance and secure WPA3 encryption. Includes six external antennas to deliver a maximum TX power of 23dBm. One ethernet port is included to support up to 5 Gbps and includes one gigabit PoE+ port. Lightning-fast speed crafts an unwavering connectivity executed through a total of 2402 Mbps the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band. Integrated 4x4 radio chains and streams to deliver a secure and seamless network experience. WatchGuard's AP130, AP330, AP430CR, and AP432 requires an active Management License. Select from a Standard or USP Management License to activate and access WatchGuard Cloud. The Management License is required to activate and manage the WatchGuard access points. Requires 6 external antennas (WG9004) sold separately..Dual-band (2.4 GHz and 5 GHz) designed for outdoor use in harsh environments..Max Data rate up to 574 Mbps available on the 2.4 GHz band, Max Data rate up to 2.3 Gbps on the 5 GHz band.Supports PoE (802.3at) and Wi-Fi 6 standard..Offers MU-MIMO for efficient multiple device connectivity..1-GbE-RJ45 Ports 1x 5-GbE-RJ45 Ports 1x PoE Powered Device (PD) PoE-PD Ports.Package Contents AP430CR Outdoor Access Point Wall Mount Plate Pole Mount Clamp.Powered via PoE or optional DC power adapter..Operates on 2.4 GHz and 5 GHz frequencies with enhanced range..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited hardware warranty.Support for up to eight individual SSIDs per radio allows for maximum flexibility in network design.Lightning-fast speed crafts an unwavering connectivity experience executed by 2402 Mbps on the 5 GHz band and 574 Mbps delivered on the 2.4 GHz band

Aruba Instant On AP11 Indoor access points include an easy to use web GUI and templates so access points are up and running in minutes. Comes with an integrated virtual controller for simple deployment of multiple access points. The Aruba Instant On AP11 indoor access point is built with premium hardware and software quality that's as reliable as coming from a trusted vendor. Effortless set-up right out of the box – in the palm of your hand..Entry-level wireless access points for small and growing businesses.Up to 867Mbps wireless data rate.Uplink Gigabit Ethernet port, with POE-in support.Dimensions: 1.3" x 6" x 6".DC power: 12V.Dual radio for simultaneous dual-band operation: 5GHz for up to 867Mbps wireless data rate and 2.4GHz for up to 300Mbps wireless data rate.Meets or exceeds UL 2043 plenum rating, EN 60601-1-1 and EN 60601-1-2, Wi-Fi Alliance standards.Support for WPA2/WPA3 protected employee and guest login with Enhanced Open for per user guest access.Ships with a (black) mount clip to attach to suspended ceiling rails, and a (white) mount clip to attach to solid surfaces (wall/ceiling).1-year manufacturer limited warranty

Ubiquiti™ Networks™ NanoStation™ 2.4 GHz Wireless access point is ideal for point-to-multipoint applications and requires CPE devices with a sleek form factor. Bridge has a panel antenna with dual-polarity and requires no tools for assembly..Wireless data transfer rate: 150 Mbps.Frequency: 2.41 - 2.46 GHz ISM.Dimensions: 11.6"(H) x 3.1"(W) x 1.2"(D).Interfaces/ports: Ethernet port, fast ethernet port, 2 x network (RJ-45), PoE (RJ-45) port.Antenna gain: 11 dBi, outdoor antenna range - 9.3 mile, wireless LAN standard - IEEE 802.11n, ISM band.Management: Web based management, airControl.Power supply: PoE.Form factor: Pole mountable.Processor: Atheros MIPS 24KC, 400 MHz.Operating temperature: -30 - 75 deg C, Operating humidity: 5 - 95% condensing.Memory: 32MB SDRAM, 8MB Flash.Features: MIMO technology, quality of service, LED indicator.With software-enabled PoE output, the secondary ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration.TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.Polarization: Dual linear.Includes pole mounting kit.Certifications and standards: ETSI300-019-1.4, FCC Part 15.247, IC RS210, CE, IEEE standards - 802.11 b/g/n/802.3af.Weight: 14.11 oz..Warranty: 1 year limited.Ubiquiti™ Networks™ NanoStation™ 2.4 GHz Wireless access point has CPE design that expanded the global wireless ISP industry and offers transfer rate up to 150 Mbps.

The Aruba 505H series access points are designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features orthogonal frequency-division multiple access (OFDMA), multi-user MIMO and cellular optimization. With up to two spatial streams (2SS) and 80MHz channel bandwidth, the 505H series provides groundbreaking wireless capabilities for budget-conscious deployments. Provides high-performance connectivity for any organization experiencing growing mobile, cloud and IoT requirements. With a wireless aggregate data rate of up to 1.5 Gbps and Gigabit local wired ports, it delivers the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike..Hospitality access point provides high-performance connectivity for any organization experiencing growing mobile, cloud, and IoT requirements.Dimensions: 5.9"H x 3.39"W x 1.85"D.Comes in white.Uplink interfaces: smart rate Ethernet wired network port (RJ45) (auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX, 2.5Gbps speed complies with NBase-T and 802.3bz specifications, 802.3az Energy Efficient Ethernet (EEE), POE-PD: 48Vdc (nominal) 802.3af/at/bt POE (class 3, 4 or 6).Local interfaces: 4 x Ethernet wired network ports (RJ45).Combine wireless and wired access in a single compact form factor.Perfect for organizations with work-from-home or teleworker initiatives.Supports up to 1.5Gbps of maximum wireless throughput.Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices.AI-powered ClientMatch technology eliminates sticky client issues by placing Wi-Fi 6 capable devices on the best available AP.MPSK enables simpler passkey management for WPA2 devices: should the Wi-Fi password on one device or device type change, no additional changes are needed for other devices.Can be used to establish a secure SSL/IPSec VPN tunnel to a Gateway or Mobility Controller that is acting as a VPN concentrator.Meets or exceeds FCC/ISED, CE Marked, RED Directive 2014/53/EU, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, IEC/EN 60950, EN 60601-1-1, EN60601-1-2, IEC/EN 62368-1 standards.Lifetime manufacturer limited warranty

1+km transmission Range O1-5G adopts of internal power amplifier and 9dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 1km..Operating on the 5GHz band, the Tenda O1-5G KIT is ideal for PtP and P2MP applications like video surveillance, internet sharing, and long-range connectivity..Utilizing Wi-Fi 5 (802.11ac) with a maximum speed of 867 Mbps, it ensures fast and reliable wireless communication for data-intensive applications..Supports Power over Ethernet (PoE) and Wi-Fi 5, enabling simplified installation with power and data via a single Ethernet cable..It Offers robust outdoor connectivity with 11AC technology, 867Mbps speeds, and a 9dBi directional antenna for stable 1km connections..Included Components: 5GHz 9dBi 11AC 867Mbps Outdoor CPE, 1 x Power Adapter, 1 x PoE Injector, 1 x Quick Installation Guide.Supports 12V 1A Passive PoE and DC power options, offering flexible and easy installation in various environments..Operates on the 5GHz band, offering high-speed wireless connectivity with less interference than the 2.4GHz band..Features an IP65 waterproof enclosure for protection against dust and water..Certifications & Standards: FCC, CE, RoHS.Comes with 3 years limited warranty.

This kit includes five dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.

To meet the increasing needs and volumes of connected devices, Aruba Instant On is announcing its first Wi-Fi 6 access point: AP22. Delivering higher capacity and greater performance at a competitive price, the AP22 is the perfect access point for small businesses with expanding mobile, cloud, and IoT requirements. Wi-Fi Certified 6 AP22 access points deliver faster Wi-Fi speeds, greater capacity, and reduced latency between access points and devices for a superior Wi-Fi experience. With the AP22, you can upgrade your Wi-Fi network to boost performance across devices now, while preparing it for more mobile and IoT devices in the future. Already have a demanding mobile and/or IoT environment? Delivering 4x the capacity of 802.11ac access points, the AP22 can provide an exceptional user experience in a broad variety of scenarios. Remote offices. Hybrid classrooms. Hotels and restaurants. Reimagined retail and hospitality. The AP22 can handle them all without breaking a sweat. Want to make wires a thing of the past? Combine the AP22 with Smart Mesh Wi-Fi for complete wireless coverage. The Aruba Instant On AP22, at every level, is designed for rapid deployment and simplified management. Be it mounting hardware, or remote device management, or having access to the latest business-grade software, the AP22 lives to make your life easier..Gain insights into customers with third party captive portal integration with partners like Skyfii, Purple, Aislelabs, and Wavespot..Instant On supports Facebook Wi-Fi, so when people access the Wi-Fi at your locations, they are redirected through your business’ Facebook page..Block undesired applications and websites with greater traffic visibility without the need for any external gateway or additional costs – the control is at your fingertips..Stop unwanted people and bots from accessing your network. Leverage advanced features that do not require external gateways - or the complexity that comes with them. Quickly and easily swap it out with another AP in a single click, in case of gateway failure..Get full visibility into the apps running on your network. Block certain applications from being used. Manage this feature straight from the Aruba Instant On app..Customize the experience with logos, authentications, and rules of use. Apply bandwidth rates. Set data usage per app. Limit duration of use. Use an external portal or service like Facebook Wi-Fi. Create open guest networks for quick and easy access..Control network widths, channels, and channel widths to suit your specific environment. Keep users happy as they move between spaces or meetings with a seamless handoff between APs. Just provide secure WPA2 or WPA3 authentication on your networks and Aruba will do the rest..Manage multiple sites, multiple networks, distributed deployments, and multi-tenancy deployments with ease through Aruba's cloud-hosted web interface and mobile app. Create unique configurations, statistics, guest portals, and admin read/write and read-only privileges for every site..Fast 802.11ax, 2X2:2.Wi-Fi Certified 6 (Wi-Fi 6).MU-MIMO performance.Smart Mesh Wi-Fi support.Built-in Wi-Fi router/gateway functionality.Integrated Bluetooth.Easy-to-use web and mobile app for setup and management.Secure Guest Wi-Fi with simple setup.Application classification, control and visibility.Aruba Instant On AP22 Indoor Access Points have built-in wireless mesh capabilities to cost-effectively extend Wi-Fi connectivity without additional cables.

The WatchGuard AP332CR is designed for medium-density deployments and is IP67-rated to enable use in outdoor and rugged environments. This dual-band access point delivers fast, reliable coverage with a 2x2 radio and four external, omnidirectional antennas offering up to 1.2 Gbps on the 5 GHz band. A single PoE+ port is included to support data rates up to 2.5 Gbps. Utilizing WatchGuard Cloud for deployment and configuration, the AP332CR offers a seamless experience with Wi-Fi 6 performance and WPA3 encryption ? making it ideal for building easily scalable networks across school campuses, public hotspots, and smaller manufacturing environments..Dual-band (2.4 GHz and 5 GHz) for outdoor/rugged environments..Wi-Fi 6 (802.11ax) with up to 2.4 Gbps (5 GHz) and 574 Mbps (2.4 GHz)..One PoE+ port supporting up to 2.5 Gbps, Wi-Fi 6 standard..Provides MU-MIMO for efficient, multiple device connectivity..Interfaces/Ports Ethernet Technology 2.5 Gigabit Ethernet Number of Network (RJ-45) Ports 1 PoE PD Port.Package Contents AP332CR Outdoor/Rugged Access Point 4 x Omnidirectional External Antennas.Powered via PoE or optional DC power input..Operates on 2.4 GHz and 5 GHz bands for wide coverage..IP67-rated for dust and water resistance, compliant with FCC, CE, and RoHS..Comes with a 1-year limited warranty.One PoE+ port supporting up to 2.5 Gbps

This kit includes three dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.

Introducing the airMAX LiteAP AC, the high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Operates in the worldwide, license-free 5GHz frequency range with high-performance speeds. The LiteAP AC combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range with cost-effective value. The ball-joint mount provides adjustment flexibility for versatile mounting options. Minimal fasteners simplify installation. No tools are needed; only a single wrench is required for pole-mounting..This access point provides high-performance solution for long-distance, wireless broadband bridging.Dimensions: 17.81"H x 2.14"W x 3.1"D.IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Delivers up to 450Mbps real TCP/IP throughput and features an efficient form factor.Features a lightweight antenna with an integrated radio in a sleek design.Operates in the worldwide, license-free 5GHz frequency range.Networking interface: 10/100/1000 Ethernet port.Antenna gain: 16dBi.Power supply: 24V/0.5A Gigabit PoE adapter (included).Power method: passive PoE (pairs 4, 5+; 7, 8 return).The ball-joint mount provides adjustment flexibility for versatile mounting options.No tools are needed for installation; only a single wrench is required for pole-mounting.Operating temperature: -40 to 158 degrees Fahrenheit; operating humidity: 5 to 95% noncondensing.Meets or exceeds FCC and RoHS standards.1 Year Warranty

Small businesses are facing a number of challenges - challenges that need constant attention. The right technology can help you stay on top of them and stay ahead of the curve. Technologies like the ones found inside the AP22. To meet the increasing needs and volumes of connected devices, Aruba Instant On is announcing its Wi-Fi 6 access point: AP22. Delivering higher capacity and greater performance at a competitive price, the AP22 is the perfect access point for small businesses with expanding mobile, cloud, and IoT requirements. Wi-Fi 6 AP22 access points deliver faster Wi-Fi speeds, greater capacity, and reduced latency between access points and devices for a superior Wi-Fi experience. With the AP22, you can upgrade your Wi-Fi network to boost performance across devices now, while preparing it for more mobile and IoT devices in the future.Already have a demanding mobile and/or IoT environment? Delivering 4x the capacity of 802.11ac access points, AP22 can provide an exceptional user experience in a broad variety of scenarios. Remote offices. Hybrid classrooms. Hotels and restaurants. Reimagined retail and hospitality. The AP22 can handle them all without breaking a sweat.Wi-Fi plays the critical role in business today. No business can't afford downtime. The Aruba Instant On AP22, at every level, is designed for rapid deployment and simplified management. Be it mounting hardware, or remote device management, or having access to the advanced business-grade software, the AP22 lives to make your life easier..Conveniently expands your network to hard-to-wire areas – nearly eliminating spotty connections and dead zones, providing Wi-Fi where you need it..Aruba Instant On AP22 Indoor Access Points come with integrated Wi-Fi Alliance security standard WPA2/WPA3 and Enhanced Open support for protected wireless access..Aruba Instant On AP22 Indoor Access Points are ideal for single or distributed small business sites such as graphic design firms, cafés, restaurants, and other Wi-Fi hotspots..Allows access points (APs) to handle multiple Wi-Fi 6-capable clients on each channel simultaneously - regardless of device or traffic type. This improves efficiency by boosting overall capacity, while reducing latency..Ideal for IoTs that communicate infrequently, TWT establishes a schedule for when clients need to communicate with an AP. This helps reduce power consumption, extending the battery life of clients..Allows you to serve multiple clients (Wi-Fi 5 and Wi-Fi 6) at the same time..Enables a 25% data increase over 256 QAM, improving throughput in your access points and devices..Aruba Instant On access points have an installed TPM for secure storage of credentials, keys, and boot codes..Allows the network to assign a "color" tag to a channel and reduce the threshold for interference. Network performance is improved because APs on the same channel can be closer together and still transmit at the same time - as long as they are different colors..Uses built-in filtering to automatically minimize the impact of interference from cellular networks, distributed antenna systems (DAS), and commercial small-cell or femtocell equipment..Delivers high-efficiency error correction for increased throughput..Stop unwanted people and bots from accessing your network. Leverage advanced features that do not require external gateways - or the complexity that comes with them. Quickly and easily swap it out with another AP in a single click, in case of gateway failure..Every customer has different environment. They might want to authenticate with the ISP's PPPoE server and provide static IP to the APs..Keep users connected via softphones and mobile apps. Automatically detect and prioritize voice and video applications such as Skype, FaceTime, and WeChat that use SIP, SCCP and other popular protocols..Aruba Instant On AP22 Indoor Access Points have built-in wireless mesh capabilities to cost-effectively extend Wi-Fi connectivity without additional cables.

The hardened, Aruba 518 series access point delivers high Wi-Fi 6 performance in harsh, weather-protected environments such as warehouses, industrial freezers or enclosures in extreme environments such as stadiums. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services. Purpose-built to survive in the harshest outdoor environments, 518 series APs withstand exposure to extreme high and low temperatures, persistent (non-precipitant) moisture, and are sealed to keep out airborne contaminants. All electrical interfaces include industrial strength surge protection. Aruba Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements. With maximum aggregate on air data rate of 3Gbps (HE80/HE40) the 518 series delivers the speed and reliability needed for any environment..Hardened access point delivers high-performance Wi-Fi 6 in harsh, weather-protected environments such as warehouses, industrial freezers, or enclosures in extreme environments such as stadiums.With the maximum aggregate on-air data rate of 3Gbps (HE80/HE40), this access point delivers the speed and reliability needed for any environment.AP can be configured to enable or disable capabilities based on available PoE+ power, perfect when wired switches have exhausted their power budget.Delivers 4x4:4SS MU-MIMO capability; Aruba's advanced ClientMatch and integrated Bluetooth enable Aruba location services.Features 1 x HPE SmartRate port (RJ45), 1 x 10/100/1000BASE-T (RJ45), 1 x USB Type-C console interface.Access point supports Power over Ethernet (PoE+), 802.3at compliant; worst-case access point power consumption: 25.6W (power sources sold separately).Dynamic frequency selection (DFS) maximizes the use of available RF spectrum.Meets or exceeds the FCC/ISED, CE Marked, RED Directive 2014/53/EU, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, UL/IEC/EN 60950, EN 60601-1-1, EN60601-1-2 standards.Link aggregation (LACP) support between both network ports for redundancy and increased capacity.Software-configurable dual radios support 5GHz (Radio 0) and 2.4GHz (Radio 1).5GHz: four RP-SMA connectors for external antenna operation; 2.4GHz: two RP-SMA connectors for external antenna operation.Supported modulation types: 802.11b - BPSK, QPSK, CCK; 802.11a/g/n - BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension); 802.11ac - BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension); 802.11ax - BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM.Supported radio technologies: 802.11b - direct-sequence spread spectrum (DSSS); 802.11a/g/n/ac - orthogonal frequency-division multiplexing (OFDM);­ 802.11ax - orthogonal frequency-division multiple access (OFDMA) with up to 16 resource units (RU).Each access point provides connectivity for a maximum of 512 associated clients per radio (1024 total) and up to 16 BSSIDs per radio.Aruba's patented AI-powered ClientMatch technology ensures that all clients are attached to their best serving access point; session metrics, network metrics, applications, and client type are used to identify and maintain best connection.Minimum operating system software versions: ArubaOS and Aruba InstantOS 8.7.0.0.Dimensions: 8.5"H x 8.5"W x 2.5"D.Regulatory domain: United States of America.Lifetime manufacturer limited warranty

The Netgear access point supports the next generation Wi-Fi 6 smart phones, IoT devices, and notebook computers, delivering up to 40% more throughput to each individual device in the 5GHz band and 70% more throughput in the 2.4GHz band, compared to the previous generation equivalent model; provides 4x the client device connection, allowing businesses to serve more customers with better speed and less congestion. This access point is perfect in high density client device environments such as schools, hotels, restaurants and conference centers, and provides enterprise grade Wi-Fi network security. With Insight management, it works seamlessly with your current Netgear Insight managed switches, Wi-Fi access points and network storage, and is compatible with previous generation Wi-Fi devices (Wi-Fi 5 802.11ac for example) and Wi-Fi access points..This access point supports the next-generation Wi-Fi 6 smartphones, IoT devices, and notebook computers.Dual band 2x2 (2.4GHz and 5.0GHz) four streams of data for an aggregate throughput of up to 1.8Gbps.Contains one 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X) supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Dimensions: 1.3"H x 6.33"W x 6.33"D.PoE power consumption: 15.3W.Business class Wi-Fi based on next generation 802.11ax Wi-Fi 6 technology on both 5.0GHz and 2.4GHz bands; backward compatible to 802.11b/g/n/a/ac.Supports Enterprise security and Enhanced Open security, such as WAP3, WPA Enterprise, 8x SSID and VLAN.Basic Service Set Coloring (BSS Coloring) enabling significant improvement in radio frequency channel efficiency and reduction of interference.Orthogonal Frequency Division Multiple Access (OFDMA) allowing simultaneous services to multiple devices in the same channel thus improving bandwidth efficiency and reducing latency.Target Wake Time (TWT) allows more efficient power usage resulting in longer battery life in Wi-Fi 6 client devices.One 802.3at 2.5Gbps PoE port; remote management and monitoring from Netgear Insight app or Cloud Portal for unrivaled management experience of your wireless network.Box contains: access point, wall/ceiling mount kit, installation guide.5-year manufacturer limited warranty

This kit includes dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 1167 Mb/s over the 2.4 GHz and 5 GHz frequencies. The 140AC's Gigabit Ethernet port supports passive 802.3af power over Ethernet (PoE), allowing you to transfer both data and power over a single cable when connected to compatible devices. Alternatively, you can power the device with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1167 Mbps.Number of ports and Type: 1 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.3 x W 5.9 x D 5.9 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 8 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your business with fast and reliable Wi-Fi connections by connecting the Cisco Business 140AC Dual-Band Wireless Access Point to your compatible network router or switch.

Extend your high-speed wireless coverage to the outdoors with the high-powered ENH1350EXT, a Wave 2 Outdoor 11ac, 2x2, MU-MIMO, Dual-Band Wireless AC1300 Access Point. Reaching speeds to 867 Mbps on 5 GHz and to 400 Mbps on the 2.4 GHz frequency band, this feature-rich AP leverages advanced Wi-Fi and Beamforming antenna technology, maximizing performance and reliability while greatly increasing outdoor network user capacities. The AP is designed to operate in harsh environmental conditions and includes an IP67-rated waterproof and dustproof casing to protect it from the elements. 11ac Wave 2 Wireless Speeds to 867Mbps on 5GHz; to 400Mbps on 2.4GHz. IP67-Rated Weatherproof & Dustproof Housing Withstands Harsh Environments. Dual-Radio MU-MIMO Improves Performance & Expands User Capacities. Beamforming Optimizes Antenna Signal, Reception & Reliability for Clients. Four (4) Detachable 5dbi High-Gain, 360 deg. SMA-Type Antennas..Environmentally Friendly: Yes.Environmental Certification: WEEE, RoHS, China RoHS, EU RoHS.Limited Warranty: 1 Year

WatchGuard’s high-performance Wi-Fi 6 access point is the ideal choice for high-density indoor environments of all shapes and sizes to utilize the most secure WPA3 encryption for a seamless Wi-Fi 6 experience for end users to enjoy.Dual-band (2.4 GHz and 5 GHz) for high-density environments..Wi-Fi 6 (802.11ax) with up to 4.8 Gbps (5 GHz) and 1.148 Gbps (2.4 GHz)..Supports PoE (802.3at) and Wi-Fi 6 standard..Supports MU-MIMO for multiple device connectivity..2.5 Gigabit Ethernet (GbE) port for wired connectivity..Includes access point unit, mounting hardware, and user guide..Powered via PoE or separate power adapter..Operates on 2.4 GHz and 5 GHz frequency bands..Complies with Wi-Fi 6 (802.11ax), FCC, CE, and RoHS certifications..Comes with a 1-year limited warranty.Qualcomm Cypress IPQ8072A Quad-core A53 ARM processor at 2 GHz with 2 GB RAM and 256 MB Flash

These economical Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing mobile, cloud and IoT requirements. With a wireless aggregate data rate of up to 1.5 Gbps and gigabit local wired ports, they deliver the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike. The Aruba 503H series APs are designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features include Orthogonal frequency-division multiple access (OFDMA), and cellular optimization. With up to two spatial streams (2SS) and 80MHz channel bandwidth, the 503H series provides groundbreaking wireless capabilities for budget-conscious deployments.This access point provides high performance and cost-effective Wi-Fi 6 (802.11ax) for hospitality, branch, and teleworker deployments.With a wireless aggregate data rate of up to 1.5Gbps, delivers the range of connectivity options needed for venues such as hotels, residence halls, and remote offices alike.Contains three Ethernet wired network ports (RJ45) with auto-sensing link speed (10/100/1000BASE-T) and MDI/MDX.Dimensions: 5.9"H x 3.39"W x 1.57"D.Maximum power consumption: 10W DC powered, 11.4W POE powered.Two integrated semi-directional antennas for 2 x 2 MIMO with peak single antenna gain of 2.5dBi in 2.4GHz and 5.6dBi in 5GHz; built-in antennas are optimized for vertical wall or desk-mounted orientation of the AP.Meets or exceeds the FCC/ISED, CE, IEC/EN standards.Combine wireless and wired access in a single compact form factor.Perfect for organizations with work-from-home or teleworker initiatives.Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices.Lifetime manufacturer limited warranty

The Ubiquiti Amplifi™ AFIHD high density router with two mesh point, 1750 Mbps supports data speeds of up to 450 Mbps on 2.4 GHz band and up to 1300 Mbps on the 5 GHz band. With WPA2-PSK AES/TKIP wireless security, this Wi-Fi router ensures greater safety against data theft. This Wi-Fi router measuring 3.91" x 3.85" x 3.92", comes with dual band tri-polarity antenna. The 1.6" 212 ppi diagonal display provides easy access for control menus. Durable plastic enclosure enhances the working life of Wi-Fi router. It includes four Gigabit LAN and three Gigabit WAN interfaces for connectivity..Transfer rate: 1750 Mbps.Interface: Four Gigabit LAN, three Gigabit WAN.Dimensions: 3.91"H x 3.85"W x 3.92"D (router), 9.6"H x 2.13"W x 2.27"D (mesh point).TX power: 26 dBm.Power consumption: 11 W.ESD/EMP protection: +/- 24 kV air/contact.Antennas: Dual band antenna, tri-polarity.Display: 1.6" diagonal, 240 x 240, 212 ppi, G+F touch, full color.802.11ac Wi-Fi standards.Wireless security: WPA2-PSK AES/TKIP.Radios: 2, MIMO chains: 6.Color: White, Material: Plastic enclosure.Operates on the 2.4 GHz band supporting data speeds of up to 450 Mbps and the 5 GHz band supporting data speeds up to 1300 Mbps.Meets FCC, CE and IC certification and standards.Weight: 14.46 oz. (router), 7.9 oz. (mesh point).Ubiquiti Amplifi™ AFIHD high density router with 2 mesh point comes compatible with 802.11a/b/g/n/ac Wi-Fi network standards supporting data speeds of up to 450 Mbps and the 5 GHz band supporting data speeds up to 1300 Mbps.

This kit includes five dual-band 802.11ac Wave 2 access points, each of which can be discreetly mounted onto a wall or ceiling to transfer data at up to 2333 Mb/s over the 2.4 GHz and 5 GHz frequencies. Both of the 240AC's Gigabit Ethernet ports support 802.3af/at power over Ethernet, allowing you to transfer both data and power over a single cable, which can be passed through to IP cameras and other devices when connected to a compatible switch. Alternatively, you can power the access point with a separately purchased PoE injector..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1733 Mbps.Number of ports and Type: 2 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.5 x W 7 x D 7 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 13.2 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.Enhance your small-to-midsize business with fast and reliable Wi-Fi connections by connecting the Cisco Business 240AC Dual-Band Wireless Access Point to your compatible network router or switch.

The Netgear access point supports the next generation Wi-Fi 6 smart phones, IoT devices, and notebook computers, delivering up to 40% more throughput to each individual device in the 5GHz band and 70% more throughput in the 2.4GHz band, compared to the previous generation equivalent model; provides 4x the client device connection, allowing businesses to serve more customers with better speed and less congestion. This access point is perfect in high density client device environments such as schools, hotels, restaurants and conference centers, and provides enterprise grade Wi-Fi network security. With Insight management, it works seamlessly with your current Netgear Insight managed switches, Wi-Fi access points and network storage, and is compatible with previous generation Wi-Fi devices (Wi-Fi 5 802.11ac for example) and Wi-Fi access points..This access point supports the next-generation Wi-Fi 6 smartphones, IoT devices, and notebook computers.Dual band 2x2 (2.4GHz and 5.0GHz) four streams of data for an aggregate throughput of up to 1.8Gbps.Contains one 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X) supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Dimensions: 1.33"H x 7.12"W x 12"D.PoE power consumption: 16.1W.Business class Wi-Fi based on next generation 802.11ax Wi-Fi 6 technology on both 5.0GHz and 2.4GHz bands; backward compatible to 802.11b/g/n/a/ac.Supports Enterprise security and Enhanced Open security, such as WAP3, WPA Enterprise, 8x SSID and VLAN.Basic Service Set Coloring (BSS Coloring) enabling significant improvement in radio frequency channel efficiency and reduction of interference.Orthogonal Frequency Division Multiple Access (OFDMA) allowing simultaneous services to multiple devices in the same channel thus improving bandwidth efficiency and reducing latency.Target Wake Time (TWT) allows more efficient power usage resulting in longer battery life in Wi-Fi 6 client devices.One 802.3at 2.5Gbps PoE port; remote management and monitoring from Netgear Insight app or Cloud Portal for unrivaled management experience of your wireless network.Box contains: access point, pole mount kit, wall/ceiling mount kit, installation guide.5-year manufacturer limited warranty

The Cisco Catalyst 9130AX series access points are the next generation of enterprise access points. They are resilient, secure, and intelligent. With the emergence of high-density networks and the Internet of Things (IoT), we are more dependent on wireless networks than ever before. Increasing numbers of devices connect to the network every year, ranging from high-performance client devices to low-bandwidth IoT devices. Cisco Catalyst 9130AX series access points provide a seamless experience anywhere for everyone, with high scaling and unmatched performance in diverse network deployments. Going beyond the Wi-Fi 6 (802.11ax) standard, the 9130AX series provides integrated security, resiliency, and operational flexibility as well as increased network intelligence. Extending Cisco's intent-based network and perfect for networks of all sizes, the Cisco Catalyst 9130AX Series scales to meet the growing demands of IoT while fully supporting the latest innovations and new technologies. The 9130AX series is also a leader in performance, security, and analytics. The Cisco Catalyst 9130AX series access points, paired with the Cisco Digital Network Architecture (Cisco DNA), are enterprise-class products that will address both your current and future needs. They are the first step in updating your network to take better advantage of all of the features and benefits that Wi-Fi 6 provides..This access point provides integrated security, resiliency, and operational flexibility as well as increased network intelligence.Provides up to 5.38Gbps (8x8 80MHz or dual 4x4 80+80MHz on 5GHz and 4x4 20MHz on 2.4GHz).Contains 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ45): IEEE 802.3az, management console port (RJ45), and USB 2.0 at 4.5W (enabled via future software).Dimensions: 1.88"H x 8.9"W x 8.9"D.Meets or exceeds IEC, EN, UL, CAN/CSA, AS/NZS, ICES, VCCI-CISPR, RSS standards.Delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT.The Cisco RF Application-Specific Integrated Circuit (ASIC) is a fully integrated Software-Defined Radio (SDR) that can perform advanced RF spectrum analysis and delivers features such as Cisco CleanAir, Wireless Intrusion Prevention System (WIPS), FastLocate, and Dynamic Frequency Selection (DFS) detection.Orthogonal Frequency-Division Multiple Access (OFDMA)-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.Supporting eight spatial streams, Multiuser Multiple Input, Multiple Output (MU-MIMO) enables access points to split spatial streams between client devices to maximize throughput.Power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point.Comes in white.Lifetime manufacturer limited warranty

Ideal for small and medium-sized networks, the Cisco Business 240AC Access Point delivers industry-leading performance for enterprise-class 4x4 Multi-user Multiple-Input Multiple-Output (MU-MIMO), four spatial stream access points that support the Institute of Electrical and Electronic Engineers (IEEE) 802.11ac Wave 2 standard. The Cisco Business 240AC Access Point extends support to a new generation of Wi-Fi clients, such as smartphones, tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave 2 support..Type of Product/Use: Dual-Band Wireless Access Point.Adapter Speed: 1733 Mbps.Number of ports and Type: 2 Gigabit Ethernet (RJ45) (Uplink) PoE, 1 Ethernet (RJ45) (Console).Dimensions as H 1.5 x W 7 x D 7 in inches.Installation Info: Wall & Ceiling Mountable.Power Rating/Voltage: 13.2 W.Supported Protocols: MAC Filtering, RADIUS.Warranty: Limited Lifetime.The Cisco Business 240AC Access Point delivers an ideal blend of predictable performance in a compact form.

Netgear WAX610PA dual band PoE Multi-Gig Insight Managed WiFi 6 access point. Get powerful and reliable WiFi 6 connectivity for all your devices, even in high-density environments. Simplified enterprise-grade security and networking for the smaller business. Power adapter included..Dual band PoE Multi-Gig Insight managed WiFi 6 access point.Dimensions: 1.30"H x 6.33"W x 6.33"D.Comes in white.Faster and more reliable WiFi due to higher throughput and more coverage with the use of both 2.4Ghz and 5Ghz bands simultaneously.Extra wired 2.5Gbps Ethernet port that's backward compatible with 100/1000Mbps Ethernet for easy wiring, WAX610PA version includes power adaptor for non-PoE installations.Wire-free installation with other WAX610, WAX610Y, WAC540, or WAC564 creates the perfect seamless business network..Maximum of users: 250.Concurrent users: 30.2.5G Ethernet port.Separate and secure networks for admin, guests, employees and IoT like cameras, locks and more

50% off  of Netgear WAX615PA Insight Managed AX3000 Dual Band WiFi 6 Access Point, White (WAX615PA-100NAS)

Get powerful and reliable Wi-Fi 6 connectivity for all your devices, even in high-density environments. Simplified enterprise-grade security and networking for the smaller business. Netgear WAX615PA is a high performance Wi-Fi 6 access point, perfect for small and medium sized businesses. The access point is a dual band 2x2 design delivering up to 3Gbps total Wi-Fi throughput, supported by a 2.5Gbps Power-over-Ethernet port, an industry leader of performance and cost effectiveness in its product class. The WAX615PA supports the next generation Wi-FI 6 smart phones, IoT devices, and notebook computers. The WAX615PA Wi-Fi is based on Wi-Fi 6 Release 2 technology, featuring 160MHz channelization on 5GHz band, delivering 100% more throughput than designs based on Wi-Fi 6 Release 1. Compared to Wi-Fi 5 access points, the WAX615PA provides 4x the client device connection, allowing businesses to serve more customers with better speed and less congestion. The WAX615PA is perfect in high density client device environments such as schools, hotels, restaurants and conference centers, and provides enterprise grade Wi-Fi network security. With Insight management, WAX615PA works seamlessly with your current Netgear Insight managed switches, Wi-Fi access points and network storage, and is compatible with previous generation Wi-Fi devices (Wi-Fi 5 802.11ac for example) and Wi-Fi access points..Get powerful and reliable Wi-Fi 6 connectivity for all your devices even in high-density environments with this dual-band (2.4GHz/5GHz) access point.Dual-band (2 x 2) access point delivers up to 3Gbps total Wi-Fi throughput; supported Wi-Fi standards: 5GHz (802.11a/n/ac/ax) and 2.4GHz (802.11b/g/n/ax).AP configured by a 2.5Gbps Power over Ethernet port.This Wi-Fi AP is based on Wi-Fi 6 Release 2 technology, featuring 160MHz channelization on 5GHz band, delivering 100% more throughput than designs based on Wi-Fi 6 Release 1.Features 1 x 100/1000/2.5GBASE-T Gigabit Ethernet (RJ45) port with auto uplink (auto MDI-X) supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE).Package contents: wireless access point, wall/ceiling mount kit, installation guide, power adapter.AP supports direct DC power and Power over Ethernet (PoE).Instant Wi-Fi mesh forming wireless backhaul with other WAC540, WAC564, WAX610, WAX610Y, WAX620, WAX630, or WAX630E units to form a Wi-Fi mesh network.Four times more client device supported.Enterprise security and Enhanced Open security such as WPA3/WPA3 Enterprise, 8 x SSID, and VLAN.Basic Service Set Coloring (BSS Coloring) enabling significant improvement in radio frequency channel efficiency and reduction of interference.Orthogonal Frequency Division Multiple Access (OFDMA) allowing simultaneous services to multiple devices in the same channel thus improving bandwidth efficiency and reducing latency.Target Wake Time (TWT) allows more efficient power usage resulting in longer battery life in Wi-Fi 6 client devices.Wireless distribution system (WDS): bridge mode point-to-point wireless, bridge mode point-to-multipoint wireless, repeater mode, adjustable Transmit Power Control (TPC), device detection, identify type of wireless clients in the network.Enhanced beamforming: advanced 6th generation Wi-Fi technology such as up- and downstream MU-MIMO.One 802.3at 2.5Gbps PoE port: remote management and monitoring from Netgear Insight app or Cloud portal for unrivaled management experience of your wireless network.Dimensions: 9.5"H x 9.5"W x 1.58"D.Operating temperature: 32 to 104 degrees Fahrenheit.5-year manufacturer limited warranty

Based on Ubiquiti’s LTU technology, the LTU LR is not impeded by the limitations of standard 802.11 Wi-Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps of real TCP/IP throughput and modulation rates of up to 4096QAM..The LTU LR supports both bridged and built-in hardware NAT router modes to suit your specific deployment..The LTU LR can use different frequencies for TX and RX to avoid interference.The LTU LR directs RF energy in a tighter beamwidth. With the focus in one direction, the LTU LR blocks or spatially filters out noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency..Ubiquiti’s InnerFeed technology integrates the radio into the feedhorn of a 26 dBi antenna, so there is no need for a cable. This improves performance because it eliminates cable losses..The LTU LR features a large reflector size and easy elevation adjustment (azimuth is adjusted by rotation around the pole)..Channel width flexibility allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Channel width options include the following:10 MHz 20 MHz 30 MHz 40 MHz 50 MHz Up to 100 MHz.By default, the Auto Output Power option allows the LTU LR to set the output power (EIRP) to the appropriate level..The LTU LR's TX output power is controlled by the AP's target TX output power. A PtMP network can manage signal levels to enhance network stability and achieve optimal wireless performance with the highest possible modulation..To manage the LTU LR, you have two options: the LTU Configuration Interface and Ubiquiti Network Management System (UNMS™). Either option lets you manually configure the LTU LR..Wireless Transmission Speed 600 Mbit/s.Form Factor Pole-mountable.Designed for long-range applications, the LTU LR is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point-to-MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.

The Tenda i27 is a Wi-Fi 6 ceiling-mounted access point designed to deliver high-speed wireless connectivity for medium to large spaces. Ideal for businesses, offices, and homes with high-density device usage, the i27 supports the latest Wi-Fi 6 (802.11ax) technology, offering a combined wireless speed of up to 2976 Mbps across dual bands. The 5 GHz band delivers speeds of up to 2400 Mbps, while the 2.4 GHz band supports speeds of up to 576 Mbps. This access point features OFDMA and MU-MIMO technologies, enhancing performance in environments with many connected devices by allowing simultaneous data transmission to multiple devices. It also supports Power over Ethernet (PoE), simplifying installation by reducing the need for additional power sources. With a sleek, ceiling-mountable design, the i27 is built for high coverage and strong signal strength. It includes WPA3 encryption for enhanced security, ensuring the protection of your network from unauthorized access. The device is easy to manage via the Tenda cloud platform, providing both web-based and mobile interface options for quick configuration and monitoring. The Tenda i27 is the perfect solution for those seeking reliable, high-performance Wi-Fi 6 access points that can handle dense device environments while maintaining strong coverage and security..The Tenda i27 supports dual-band wireless connectivity, offering both 2.4 GHz and 5 GHz bands for reliable coverage and higher speeds. It is designed for use as a ceiling-mounted access point, ideal for providing Wi-Fi coverage in large spaces..Utilizes the Wi-Fi 6 (802.11ax) wireless standard, delivering a maximum data transfer rate of up to 2976 Mbps, with 2400 Mbps on the 5 GHz band and 576 Mbps on the 2.4 GHz band..Supports Power over Ethernet (PoE), allowing for easy installation without the need for separate power sources. It operates on the Wi-Fi 6 (802.11ax) standard for improved speed, capacity, and performance in high-density environments..Provides wireless connectivity using the latest Wi-Fi 6 technology, offering enhanced performance, faster speeds, and greater efficiency, especially in environments with multiple devices..The access point is equipped with an Ethernet port for network connection and supports PoE for power delivery, simplifying the installation process..The package includes the Tenda i27 access point, mounting brackets for easy ceiling installation, and a user manual for setup and configuration..Powered via Power over Ethernet (PoE), eliminating the need for a separate power adapter and simplifying the installation process..Operates on two frequency bands: 2.4 GHz and 5 GHz, providing dual-band coverage for optimized speed and range..Complies with the latest Wi-Fi 6 (802.11ax) standards and includes WPA3 encryption for enhanced security. It also adheres to industry standards for performance and reliability..1-year limited warranty, ensuring peace of mind for your purchase and ongoing support.